DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad - 4S - Choose Your Receiver

Description

Pre-Orders shipping ASAP!

For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer.

DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ.

Check out our other pre-built quads, as well as the rest of our DarwinFPV selection

Features

  • Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high-cost performance;
  • It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster;
  • The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable;
  • The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash;
  • The independent action camera base can be used with naked GoPro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.


     

    Specifications

    • Brand: DarwinFPV
    • Model: BabyApe Ⅱ 4S
    • Frame: Wide X
    • Wheelbase: 156mm
    • Size: 126mmx150mmx50mm
    • Flight Control: F411 MPU6500 AT7456E
    • Firmware:DARWINF411
    • Firmware: BETAFPV_Nano_2400_RX
    • The receiver's factory firmware is ELRS_V3.2.0
    • Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB
    • ESC: Bluejay 48KHz 3-6S 30A
    • Motor:  4S version:1504-3600KV
    • Propeller: HQProp T3.5x2x3GR-PC
    • Weight: 135.4 g (analog version)
    • Receiver: ELRS 2.4GHz

    Darwin FPV "Cement" Ultra Durable FPV Drone Camera

    • Sensor type:1/3" CMOS Sensor
    • Image:16:9
    • TV System: NTSC
    • Horizontal Resolution:1200TVL
    • Lens:2.1mm 160°
    • Electronic Shutter: 1/50~1/100000 sec
    • Video Output: CVBS
    • Min. Illumination:0.001Lux
    • wb: automatic
    • DNR: 3D DNR
    • WDR: 100db
    • Input voltage: DC 3.7-24V
    • Working current:80mA@DC12V/170mA@DC5V
    • IP: IP67
    • Size:19x19mm
    • Weight:7.9g

    DarwinFPV 25/200/400/600mW VTX

    • Output Power: 25/200/400/600mW(adjustable)
    • Frequency: 5.8Hz 40port
    • Power Supply Voltage Range: 5V
    • Weight: 3.5g
    • Pitch: 28x15mm(length x width)
    • Protocol: SmartAudio
    • Indicator Light Description:

    Includes

    • 1x DarwinFPV BNF Baby Ape V2 3.5" Analog Micro Quad - 4S - Choose Your Receiver
    • 4x HQProp T3.5x2x3GR-PC
    • 2x Battery cable strip ( 10x170mm)
    • 2x EVA shock pad(thickness:10㎜)
    • 1x Spare screws bag
    • 1x Sticker
    • 1x Manual
    Product form

    $157.99

      SKU: sku-40328003321969

      Brand: BetaFPV | Quad

      Product Tags

      Description

      Pre-Orders shipping ASAP!

      For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer.

      DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ.

      Check out our other pre-built quads, as well as the rest of our DarwinFPV selection

      Features

      • Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high-cost performance;
      • It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster;
      • The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable;
      • The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash;
      • The independent action camera base can be used with naked GoPro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.


         

        Specifications

        • Brand: DarwinFPV
        • Model: BabyApe Ⅱ 4S
        • Frame: Wide X
        • Wheelbase: 156mm
        • Size: 126mmx150mmx50mm
        • Flight Control: F411 MPU6500 AT7456E
        • Firmware:DARWINF411
        • Firmware: BETAFPV_Nano_2400_RX
        • The receiver's factory firmware is ELRS_V3.2.0
        • Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB
        • ESC: Bluejay 48KHz 3-6S 30A
        • Motor:  4S version:1504-3600KV
        • Propeller: HQProp T3.5x2x3GR-PC
        • Weight: 135.4 g (analog version)
        • Receiver: ELRS 2.4GHz

        Darwin FPV "Cement" Ultra Durable FPV Drone Camera

        • Sensor type:1/3" CMOS Sensor
        • Image:16:9
        • TV System: NTSC
        • Horizontal Resolution:1200TVL
        • Lens:2.1mm 160°
        • Electronic Shutter: 1/50~1/100000 sec
        • Video Output: CVBS
        • Min. Illumination:0.001Lux
        • wb: automatic
        • DNR: 3D DNR
        • WDR: 100db
        • Input voltage: DC 3.7-24V
        • Working current:80mA@DC12V/170mA@DC5V
        • IP: IP67
        • Size:19x19mm
        • Weight:7.9g

        DarwinFPV 25/200/400/600mW VTX

        • Output Power: 25/200/400/600mW(adjustable)
        • Frequency: 5.8Hz 40port
        • Power Supply Voltage Range: 5V
        • Weight: 3.5g
        • Pitch: 28x15mm(length x width)
        • Protocol: SmartAudio
        • Indicator Light Description:

        Includes

        • 1x DarwinFPV BNF Baby Ape V2 3.5" Analog Micro Quad - 4S - Choose Your Receiver
        • 4x HQProp T3.5x2x3GR-PC
        • 2x Battery cable strip ( 10x170mm)
        • 2x EVA shock pad(thickness:10㎜)
        • 1x Spare screws bag
        • 1x Sticker
        • 1x Manual

        Recently viewed products

        © 2024 Caloosa Trains And Hobbies,

          Login

          Forgot your password?

          Don't have an account yet?
          Create account