1/24 Scale

48 products

  • AXI00006, SCX24 Ford Bronco 4wd RTR AXI00006, SCX24 Ford Bronco 4wd RTR

    Axial AXI00006, SCX24 Ford Bronco 4wd RTR

    Out of stock

    Product Features DETAILED SCALE FORD BRONCO HARD BODY SCALE INTERIOR W/ DRIVER STEEL C-CHANNEL CHASSIS FRAME DYNAMITE® BRUSHED MOTOR WORM GEARS FRONT AND REAR SOLID AXLE HOUSINGS DURABLE STEEL AXLES LIGHTS AND MOLDED LENSES 4-LINK REAR SUSPENSION WILDTRAK WHEELS & NITTO TRAIL GRAPPLER M/T TIRES FULL BALL BEARINGS Specifications Length: 8.75" (222mm) Width: 3.87” (99mm) Height: 4.62” (118mm) Ground Clearance: 1.06" (27mm) Wheelbase: 5.19" (132mm)                               

    Out of stock

    $159.99

  • AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio

    Axial AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio

    Out of stock

    AXI90081, Axial SCX24 Deadbolt 1/24 RTR Scale Mini Crawler w/2.4GHz Radio The Axial SCX24 Deadbolt RTR 1/24 Scale Mini Crawler is the first Axial® off-roader in 1/24 scale. At less than 8" long, it's ideal for indoor fun, but performs so well, its equally suited to outdoor adventures as well. Even new drivers will be well-equipped to tackle tough climbs and rough trails. Like it's SCX10 big brother, the SCX24 uses plenty of steel components - from the C-channel frame rails to the front and rear axles and dogbones. Offering ready to run simplicity, scale looks, and confident handling on any trail, the SCX24 has the strength to keep pushing onward and upward. The SCX24 chassis features a three-link front and four-link rear suspension for realistic handling. The combination of coil-over shocks and durable plastic suspension links delivers Axial-worthy crawling performance even at this small scale. Plus, worm gear axles provide high ground clearance with a low gear ratio that helps to reduce torque twist. Powered by an included 180-size motor and LiPo battery, the SCX24 Deadbolt shows off competence and charisma on the trails. The shrunk down Deadbolt body provides the classic stance, bulging hood, realistic driver figure, and molded roll cage with realistic light bar that makes the 1/10 Deadbolt a performer - and the realism continues right down to the licensed KMC XD229 Machete Crawl wheels wrapped in Nitto Trail Grappler tires. Adding even more to its beginner appeal, the SCX24 Deadbolt comes 100% complete and ready to run. Everything required for action is in the box: assembled and finished vehicle; Axial 2-channel 2.4GHz radio system with servo and ESC/receiver unit; Dynamite® 88T brushed electric motor and 350mAh 2S 7.4V LiPo battery; USB LiPo charger; and even four AA cells for the transmitter! Features: Includes radio system, ESC and transmitter batteries Includes motor and on-board LiPo battery Realistic narrow-stance rock crawler body in olive green or red Molded roll cage with realistic light bar Realistic driver figure and many other scale details Officially licensed KMC XD229 Machete Crawl wheels Officially licensed Nitto Trail Grappler M/T tires (S30 compound, large block tread) Full-time 4WD Splined and sleeved front and rear drive shafts allow for maximum suspension travel while keeping the power to the wheels Steel front and rear axles, front stub axles and dogbones provide strength and durability Rugged steel C-channel frame rails with bracing keep everything rigid and aligned Front and rear axles consist of a two-piece, molded plastic solid axle design 3-Link front and 4-link rear suspension supply optimal handling Coil-over shocks with simulated reservoir and durable plastic suspension links deliver proven Axial crawling performance Front and rear differentials each house a worm gear setup to power the axles and create higher ground clearance. Worm gear drive also provides a low gear ratio to reduce torque twist Two LEDs in the front bumper for night driving Specifications: Approximate Assembly Time: No assembly required Batteries: 7.4V 350mAh 30C LiPo Body: Painted and trimmed Axial Deadbolt Charger: USB LiPo charger Chassis: Stamped steel rails Completion Level: Ready-To-Run Differential: Worm gear 16T/4T Drivetrain: 4WD Gear Pitch: 32-Pitch Ground Clearance: 1.06" (27mm) Height: 4.73" (120.2mm) Length: 7.8" (199.5mm) Motor Size: 180 Motor Type: Brushed Pinion: 10T Radio: AX-4 2.4GHz 2-channel Servos: AS-1 steering servo Shock Type: Plastic body coil-over .9 - 1.3" (24 - 33.4mm) Size/Scale: 1/24 Speed Control: AE-6 ESC receiver/combo Spur Gear: 55T Suspension: Solid axle, front and rear Tire Diameter: 2.0" (51mm) Tire Tread: Nitto Trail Grappler M/T, large block tread Track: 3.9" 99.5mm) Vehicle Type: Crawler Water-Resistant: No Weight: 0.5lb (0.22kg) Wheel Diameter: 1.0" (26mm) Wheel Type: Black Plastic Licensed KMC XD229 Machete Crawl Wheel Width: 0.48" (12.4mm) Wheelbase: 5.25" (133.5mm) Width: 3.9" (99.5mm)   Includes:  (1) SCX24™ Deadbolt™ 1/24 Scale 4WD Truck (1) Axial AE-6 ESC/receiver combo (installed) (1) Dynamite® 88T brushed electric motor (installed) (1) Axial AS-1 steering servo (installed) (1) Axial® AX-4 2.4GHz 2-channel radio (4) AA transmitter batteries (1) 350mAh 2S 7.4V LiPo battery (1) USB LiPo charger (1) Product Manual Needed to Complete: Nothing! Everything you need to begin having fun with your 1/24 scale Deadbolt is included! This product was added to our catalog on May 29, 2019

    Out of stock

    $124.99

  • SCX24 1967 Chevrolet C10 Pick-up 1/24 Elec 4WD-RTR SCX24 1967 Chevrolet C10 Pick-up 1/24 Elec 4WD-RTR

    Axial SCX24 1967 Chevrolet C10 Pick-up 1/24 Elec 4WD-RTR

    Out of stock

    SCX24 1967 Chevrolet C10 Pick-up 1/24 Elec 4WD-RTR

    Out of stock

    $134.99

  • AXI00003, Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler w/2.4GHz Radio, Battery & Charger AXI00003, Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler w/2.4GHz Radio, Battery & Charger

    Axial AXI00003, Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler w/2.4GHz Radio, Battery & Charger

    Out of stock

    AXI00003, Axial AX24 XC-1 1/24 4WD RTR 4WS Mini Crawler w/2.4GHz Radio, Battery & Charger The Axial AX24 XC-1 1/24 4WD Ready to Run Mini 4WS Crawler is designed to push the limits of 1/24 RTR crawlers. The AX24 platform provides stability, durability, high clearance, generous articulation, and everything else extreme rock crawling enthusiasts need to overcome the impossible. Flat chassis side plates with rock sliders help you move through tight formations. Long travel shocks, a 4-link suspension, and a worm gear drivetrain combine for easy handling, dependable power delivery, and the ability to clear rough terrain. With 4-Wheel Steer, there are three transmitter-activated steering modes — for no rear tire input, mirrored rear tire input, or "crab crawl". The AX24 XC-1 isn't just for experienced RC rock crawling hobbyists. Everyone will find it to be a highly capable mini crawler to run on indoor or outdoor courses. Get ready to push past boundaries and conquer more trails with the Axial AX24 XC-1 Rock Crawler RTR. This AX24 includes everything you need to get out and start having fun! Features: Three 4-wheel steering (4WS) modes give all drivers terrain conquering ability. Side plate chassis allows greater articulation for improved handling over rough terrain. LED rock lights mounted in the rock sliders keep your path visible in low light. 1.0" Rockstar wheels and Rock Lizards tires produce trail-taming traction. Fully equipped — you can hit the trails almost immediately! Specifications: Scale: 1/24 Length: 7.8" (198 mm) Width: 4.5" (114 mm) Height: 3.7" (94 mm) Ground Clearance: 1.3 in (34mm) Wheelbase: 5.3" (135 mm) Drivetrain: 4WD Power Type: Electric Connector Type: PH 2.0 (High-Current Ultra Micro) Motor Type: Brushed Pinion: 11T Spur Gear: 55T Completion Level: Ready-To-Run Includes: (1) Axial AX24 XC-1 1/24 Scale 4WS RTR Rock Crawler (1) Spektrum SLT3 2.4GHz 3-Channel Radio System (4) AA Transmitter Batteries (1) Dynamite 350mAh 2S 7.4V LiPo (1) 0.5 Amp USB Charger (1) Product Manual Needed to Complete: Nothing! Everything you need to get out and have fun is in the box! This product was added to our catalog on January 27, 2023

    Out of stock

    $159.99

  • AXI00005, Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio AXI00005, Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    Axial AXI00005, Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    1 in stock

    AXI00005, Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio Axial SCX24 Micro Size Rock Crawler, with Jeep JT Gladiator Body! The Axial SCX24 Jeep JT Gladiator 1/24 4WD RTR Scale Mini Crawler, is a longer wheelbase SCX24 that is ready to hit the trail or the desk. The included Jeep JT Gladiator body depicts a scale interior, driver and detailed Tuff Stuff Overland scale accessories. Based on the proven SCX24 chassis, your everyday life has just become an excellent course. Unfolded laundry? More like a mountain for your truck to get up. Bored at work? Crawl on your desk, we won't tell HR. Out on a hike? Take this with you for an action packed day. With water-resistant electronics and performance driven design, this truck is ready to go the distance and perform like a champ.  For extreme crawling performance, this mini crawler has been extended 22mm to increase stability and allow a more scale fitment of the body. The axles use steel front and rear axles, steel stub axles and steel dogbones to give you peace of mind while tackling any obstacle. An 88T motor and 2S LiPo battery are used to provide precise, dependable control. The detailed body rides on licensed KMC Machete wheels with scale Nitto Trail Grappler M/T tires. The body uses a hinged designed, allowing for quick battery access for less downtime on the trails. Two LEDs are preinstalled into the front bumper for great night crawling options. The SCX24 Jeep JT Gladiator comes ready-to-run with radio and electronics included. Features: Factory-assembled and ready-to-run Detailed Jeep Gladiator body with scale interior, scale driver and Tuff Stuff Overland scale accessory pack Two LED lights in front bumper Officially licensed Nitto Trail Grappler M/T tires mounted on officially licensed KMC XD Machete wheels True full-time 4-wheel drive 22mm longer wheelbase for best body fitment Durable 3-link front/4-link rear suspension for optimal crawling performance Worm drive front and rear differential gears for increased ground clearance Sturdy steel C-channel frame rails with bracing for added strength and proper alignment Durable steel axles provide strength and durability to match tough climbs and rough trails Hook-and-loop body hinge for easy, tilt-open battery access Specifications: Scale: 1/24 Drive: 4WD Motor Type: Brushed Vehicle Type: Rock Crawler Includes: (1) Axial SCX24 Jeep Gladiator 1/24 Scale 4WD RTR with: (1) Horizon 2.4GHz 2-Channel Radio System (1) Axial AS-1 Servo (1) Horizon ESC/Receiver Combo (1) Dynamite 88T Brushed Electric Motor (1) Dynamite 350mAh 2S LiPo 7.4V (1) USB Charger (4) AA Batteries for Transmitter Needed to Complete: Nothing! This truck is ready to go out of the box. This product was added to our catalog on February 3, 2022

    1 in stock

    $149.99

  • AXI00002V2, Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio AXI00002V2, Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    Axial AXI00002V2, Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio

    1 in stock

    AXI00002V2, Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler w/2.4GHz Radio The Axial SCX24 2019 Jeep Wrangler JLU CRC 1/24 4WD RTR Scale Mini Crawler with 2.4GHz Radio is ready to crawl the trail or the desk. Your everyday life has just become an excellent course. Unfolded laundry? More like a mountain for your truck to get up. Bored at work? Crawl on your desk, we won't tell HR. Out on a hike? Take this with you for an action packed day. With water-resistant electronics and performance driven design, this truck is ready to go the distance and perform like a champ. Full-time 4WD and a 3-link front/4-link rear suspension let you muscle over big challenges. Worm gears on the axles increase ground clearance, while realistic steel frame rails stand up to hard knocks. The Axial SCX24 Jeep Wrangler JLU CRC performs like a winner. The detailed body rides on licensed KMC Machete wheels with scale Nitto Trail Grappler tires. The body uses a hinged designed, allowing for quick battery access for less downtime on the trails. Two LEDs are preinstalled into the front bumper for great night crawling options. The SCX24 Jeep Wrangler JLU CRC comes ready-to-run with radio and electronics included and installed. Features: 3-Link front and 4-link rear suspension for optimal handling Two LED lights are included in the front bumper for night driving Realistic steel frame rails add strength True, full-time 4-wheel-drive Comes with ESC, motor, and servo already installed Specifications: Scale: 1/24 Length: 7.8" (198mm) Width: 3.9" (99mm) Height: 4.2" (107mm) Wheelbase: 5.2" (132mm) Ground Clearance: 1.06" (27mm) Front Track Width: 3.9" (99.5mm) Rear Track Width: 3.9" (99.5mm) Tire Tread: Nitto Trail Grappler Wheel Width: 0.48" (12.4mm) Pinion: 10T Spur: 55T Differential: 16T/4T (Worm Gear) Includes: (1) 1/24 Axial SCX24 2019 Jeep Wrangler JLU CRC 4WD Rock Crawler Brushed RTR with (1) ESC/Receiver (installed) (1) 88T Motor (installed) (1) AS-1 Micro Servo (installed) (1) 4-Channel 2.4Ghz Surface Transmitter (1) Dynamite 7.4v 350mAh 2S LiPo Battery (1) USB Charger (4) AA Batteries Needed to Complete: Nothing! Everything you need to get crawling is in the box. This product was added to our catalog on December 10, 2021

    1 in stock

    $134.99

  • DYNS1217, Dynamite SCX24 Motor w/Pinion DYNS1217, Dynamite SCX24 Motor w/Pinion

    Dynamite DYNS1217, Dynamite SCX24 Motor w/Pinion

    4 in stock

    DYNS1217, Dynamite SCX24 Motor w/Pinion The Dynamite SCX24 Motor with Pinion is a replacement motor intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one motor with pinion and two screws. This product was added to our catalog on June 5, 2021

    4 in stock

    $9.00

  • HRASXTF428LT, Hot Racing Axial SCX24 Aluminum Threaded Long Travel Shocks (4)

    Hot Racing HRASXTF428LT, Hot Racing Axial SCX24 Aluminum Threaded Long Travel Shocks (4)

    5 in stock

    HRASXTF428LT, Hot Racing Axial SCX24 Aluminum Threaded Long Travel Shocks (4) This product was added to our catalog on December 16, 2021

    5 in stock

    $27.99

  • HRASXTF10H, Brass Stock Wheels hub 7mm hex SCX24

    Hot Racing HRASXTF10H, Brass Stock Wheels hub 7mm hex SCX24

    6 in stock

    HRASXTF10H, Hot Racing Axial SCX24 Brass 7mm Wheel Hex Hub (4) This product was added to our catalog on December 16, 2021

    6 in stock

    $9.00

  • 1/24 1968 Volkswagen Beetle

    Moebius Models 1/24 1968 Volkswagen Beetle

    Out of stock

    1/24 1968 Volkswagen Beetle

    Out of stock

    $29.99

  • AXI31619, Axial AS-1 Micro Servo AXI31619, Axial AS-1 Micro Servo

    Axial AXI31619, Axial AS-1 Micro Servo

    8 in stock

    AXI31619, Axial AS-1 Micro Servo The Axial AS-1 Micro Servo is a replacement micro servo intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one micro servo. This product was added to our catalog on June 5, 2021

    8 in stock

    $18.99

  • RC4ZW0229, Stamped Steel 1.0 Stock Beadlock Wheel, Black (4)

    RC4WD RC4ZW0229, Stamped Steel 1.0 Stock Beadlock Wheel, Black (4)

    Out of stock

    RC4ZW0229, Stamped Steel 1.0 Stock Beadlock Wheel, Black (4)

    Out of stock

    $27.00

  • HRASXTF1201, Front Axle Aluminum Case - Axial SCX24

    Hot Racing HRASXTF1201, Front Axle Aluminum Case - Axial SCX24

    Out of stock

    HRASXTF1201, Front Axle Aluminum Case - Axial SCX24

    Out of stock

    $49.99

  • TAM24033, Tamiya Toyota Celica Supra Long Beach GP Marshall 1/24 Model Kit TAM24033, Tamiya Toyota Celica Supra Long Beach GP Marshall 1/24 Model Kit

    Tamiya TAM24033, Tamiya Toyota Celica Supra Long Beach GP Marshall 1/24 Model Kit

    1 in stock

    TAM24033, Tamiya Toyota Celica Supra Long Beach GP Marshall 1/24 Model Kit The Tamiya Toyota Celica Supra Long Beach GP Marshall 1/24 Model Kit is a re-issue that recreates the classic Toyota Celica Supra from 1983, which depicts a special version of the Celica Supra that was used as the race marshal’s car in the 1982 Formula One race held in Long Beach, California, USA. Its tuned engine produced 230hp and a top speed of over 230km/h. The car made for a thrilling sight as it bombed around the circuit, thanks to over-sized fenders and a sporty rear spoiler! Features: 1/24 scale plastic model assembly kit Depictions of the roof-top lights, rear spoiler and exaggerated wheel fenders included Dedicated decals included Interior features separate seat parts and center console with individual gearshift and parking brake components Driver figure included Note:  Photo of completed model is for illustrative purposes only. This is a model kit that requires assembly. Hobby tools, adhesive and paint will be needed to complete the model. This kit does not include parts for motorization or the Yamaha Beluga moped, which were in the original release. This product was added to our catalog on May 9, 2021

    1 in stock

    $32.99

  • RC4ZW0261, Ballistic Off Road Rage 1.9'' Beadlock Wheel

    RC4WD RC4ZW0261, Ballistic Off Road Rage 1.9'' Beadlock Wheel

    3 in stock

    RC4ZW0261, Ballistic Off Road Rage 1.9'' Beadlock Wheel

    3 in stock

    $130.99

  • RMX854485, 1/24 Porsche Diesel Junior 108 Trackt

    Revell Monogram RMX854485, 1/24 Porsche Diesel Junior 108 Trackt

    Out of stock

    RMX854485, 1/24 Porsche Diesel Junior 108 Trackt

    Out of stock

    $29.95

  • AXI204000, Suspension Links, Long Wheel Base 133.7mm: SCX24 AXI204000, Suspension Links, Long Wheel Base 133.7mm: SCX24

    Axial AXI204000, Suspension Links, Long Wheel Base 133.7mm: SCX24

    5 in stock

    AXI204000, Suspension Links, Long Wheel Base 133.7mm: SCX24

    5 in stock

    $13.99

  • AXI31612, SCX24 Shock Set (Assembled) 4pcs AXI31612, SCX24 Shock Set (Assembled) 4pcs

    Axial AXI31612, SCX24 Shock Set (Assembled) 4pcs

    7 in stock

    AXI31612, SCX24 Shock Set (Assembled) 4pcs

    7 in stock

    $19.99

  • 1/24 Caterpillar Articulated Truck, DCM25004 1/24 Caterpillar Articulated Truck, DCM25004

    Diecast Masters 1/24 Caterpillar Articulated Truck, DCM25004

    Out of stock

    Product Details Key Features Genuine Caterpillar® licensing and quality Light and sound function Approximate battery run time: 30 min off-road use 2.4GHz fully functioning transmitter (TX operates with AAA's) Forward/Reverse motion via Rear-wheel drive Chassis pivot/turning Full-tilt dump control In The Box (1) 1/24 Caterpillar Articulated Truck (1) 2.4GHz fully functioning transmitter (1) USB charger with cable (1) DCM250000 Lithium Battery (2) AAA Batteries Needed to Complete Nothing! Everything needed to operate is included.

    Out of stock

    $114.99

  • Caterpillar 950M Wheel Loader 1/24, DCM25003 Caterpillar 950M Wheel Loader 1/24, DCM25003

    Diecast Masters Caterpillar 950M Wheel Loader 1/24, DCM25003

    Out of stock

    Product Details Key Features Genuine Caterpillar® licensing and quality Light and sound function Approximate battery run time: 30 min off-road use Forward/Reverse motion via Rear-wheel drive Chassis pivot/turning Front arm/bucket control In The Box (1) 1/24 Caterpillar 950M Wheel Loader (1) 2.4GHz fully functioning transmitter (1) USB charger with cable (1) DCM250000 Lithium Battery (2) AAA Batteries Needed to Complete Nothing! Everything needed to operate is included.

    Out of stock

    $114.99

  • RMX851988, 1/24 Disney Cars: Lightning McQueen (Snap)

    Revell Monogram RMX851988, 1/24 Disney Cars: Lightning McQueen (Snap)

    Out of stock

    RMX851988, 1/24 Disney Cars: Lightning McQueen (Snap)

    Out of stock

    $24.95

  • RMX852596, 1/24 70 Dodge Challenger 2N1

    Revell Monogram RMX852596, 1/24 70 Dodge Challenger 2N1

    Out of stock

    RMX852596, 1/24 70 Dodge Challenger 2N1

    Out of stock

    $29.95

  • 1/24 1978 Chevy El Camino 3'N1

    Revell Monogram 1/24 1978 Chevy El Camino 3'N1

    Out of stock

    1/24 1978 Chevy El Camino 3'N1

    Out of stock

    $32.99

  • 1/24 Von Franco's Eye Gone Wild Custom Vehicle

    Moebius Models 1/24 Von Franco's Eye Gone Wild Custom Vehicle

    Out of stock

    1/24 Von Franco's Eye Gone Wild Custom Vehicle

    Out of stock

    $29.99

  • RGRB1252, 11.1V 3S 25C 3600mAh Li-Po Battery w/XT60; SC700BL Super Cat

    RC4WD RGRB1252, 11.1V 3S 25C 3600mAh Li-Po Battery w/XT60; SC700BL Super Cat

    3 in stock

    11.1V 3S 25C 3600mAh Li-Po Battery w/XT60; SC700BL Super Cat

    3 in stock

    $49.99

  • RMX854486, 1/24 76 Chevy Sport Stepside Pickup 4X4

    Revell Monogram RMX854486, 1/24 76 Chevy Sport Stepside Pickup 4X4

    Out of stock

    This 76 Chevy® Pickup is part of the Chevy® C/K line of trucks. It is part of the third generation of these trucks started in 1960. The C stands for 2 wheels drive and the K for 4 wheel drive. This 3rd gen. line was a complete redesign of earlier C/K trucks and was referred to by enthusiasts as the "Square Body". The redesign was noteworthy in 2 important areas, aerodynamics and safety improvements. The new body shape was more "rounded" and featured a raked back windshield. The safety improvements included a collapsible steering column and a combined lap + shoulder seat belts. The truck was offer with choice of bed styles, "Fleetside" or "Stepside". This model features the classic "Stepside" fender design.  Detailed 4 x 4 suspension with front guard. Full Chevy® V-8 engine detail. Roll over bar with spotlights. Molded in white and clear with chrome plated parts and soft black tires.

    Out of stock

    $29.99

  • RMX854499, 1/25 Fast & Furious F-150 SVT Lightning

    Revell Monogram RMX854499, 1/25 Fast & Furious F-150 SVT Lightning

    Out of stock

    Overview Features Custom body "aero" package Supercharged V-8 engine and detailed chassis Molded in white, transparent red and clear with soft black tires. Overview In the first movie “The Fast and the Furious”, Brian O’Connor’s Ford F-150 SVT Lightning remains one of the most remembered vehicles of The Fast & Furious Saga. Brian used the truck while working at The Racer’s Edge delivering automotive parts and while he was working undercover as “Brian Earl Spilner”, a Los Angeles police officer. The Lightning is a limited edition F-150 that features a special handling suspension and high performance 4.6 V-8 pumping out over 300 horsepower. Specifications Scale 1/25

    Out of stock

    $37.95

  • RMX857225, 1/25 '66 Chevy Fleetside

    Revell Monogram RMX857225, 1/25 '66 Chevy Fleetside

    Out of stock

    1/25 '66 Chevy Fleetside

    Out of stock

    $29.95

  • RMX854228, 1/25 '32 Ford 5 Window Coupe 2 'n 1

    Revell Monogram RMX854228, 1/25 '32 Ford 5 Window Coupe 2 'n 1

    Out of stock

    1/25 '32 Ford 5 Window Coupe 2 'n 1

    Out of stock

    $32.99

  • SJMHMC2022WBP, 1/24 2022 CAMARO W. BYRON SJMHMC2022WBP, 1/24 2022 CAMARO W. BYRON

    Salvinos Models SJMHMC2022WBP, 1/24 2022 CAMARO W. BYRON

    1 in stock

    Product Description This William Byron Hendrick Motorsports 2022 Axalta 1:24 Next Generation Chevrolet Camaro Unassembled Model Car Kit is fun for the whole family. An exact replica from the NASCAR design team, this kit features high quality and intricate details, making it a must-have for your collection. You'll be reliving every William Byron race as you put this model car kit together

    1 in stock

    $44.99

  • SJMHMC2022KLP, 1/24 2022 CAMARO K. LARSON SJMHMC2022KLP, 1/24 2022 CAMARO K. LARSON

    Salvinos Models SJMHMC2022KLP, 1/24 2022 CAMARO K. LARSON

    Out of stock

    SJMHMC2022KLP, 1/24 2022 CAMARO K.LARSON Salvinos J R Models

    Out of stock

    $41.95

  • SJMHMC2022CEP, 1/24 2022 CAMARO C. ELLIOT SJMHMC2022CEP, 1/24 2022 CAMARO C. ELLIOT

    Salvinos Models SJMHMC2022CEP, 1/24 2022 CAMARO C. ELLIOT

    Out of stock

    SJMHMC2022CEP, 1/24 2022 CAMARO C.ELLIOT Salvinos J R Models

    Out of stock

    $41.95

  • SJMHMC2022ABP, 1/24 2022 CAMARO A. BOWMAN SJMHMC2022ABP, 1/24 2022 CAMARO A. BOWMAN

    Salvinos Models SJMHMC2022ABP, 1/24 2022 CAMARO A. BOWMAN

    Out of stock

    SJMHMC2022ABP, 1/24 2022 CAMARO A.BOWMA Salvinos J R Models

    Out of stock

    $41.95

  • RMX854195, 1/25 '90 Mustang LX 5.0 Drag Racer

    Revell Monogram RMX854195, 1/25 '90 Mustang LX 5.0 Drag Racer

    Out of stock

    RMX854195, 1/25 '90 Mustang LX 5.0 Drag Racer

    Out of stock

    $27.99

  • RMX854418, 1/24 Ford GT Racing LeMans

    Revell Monogram RMX854418, 1/24 Ford GT Racing LeMans

    2 in stock

    RMX854418, 1/24 Ford GT Racing LeMans

    2 in stock

    $29.95

  • 1/25 2018 Ford Mustang GT (Orange) (Snap)

    Revell Monogram 1/25 2018 Ford Mustang GT (Orange) (Snap)

    Out of stock

    REVELL #85-1996: 1/25 Scale "Snap-Tite" Orange 2018 Ford Mustang GT Plastic Model Kit

    Out of stock

    $15.95

  • 1973 Ford Mustang Mach 1 Silver with Red Stripes 1/24 Diecast Model Car by Jada 99971

    Jada 1973 Ford Mustang Mach 1 Silver with Red Stripes 1/24 Diecast Model Car by Jada 99971

    Out of stock

    1973 Ford Mustang Mach 1 Silver with Red Stripes 1/24 Diecast Model Car by Jada 99971

    Out of stock

    $25.99

  • 1/24 Richard Petty #43 1973 Dodge Charger Race Car

    Salvinos Models 1/24 Richard Petty #43 1973 Dodge Charger Race Car

    Out of stock

    1/24 Richard Petty #43 1973 Dodge Charger Race Car

    Out of stock

    $39.99

  • 1/24 1978 GMC Big Game Country Pickup Truck

    Revell Monogram 1/24 1978 GMC Big Game Country Pickup Truck

    Out of stock

    1/24 1978 GMC Big Game Country Pickup Truck

    Out of stock

    $24.95

  • 1965 Shelby Cobra 427 Convertible (Red)

    Maisto 1965 Shelby Cobra 427 Convertible (Red)

    Out of stock

    1965 Shelby Cobra 427 Convertible (Red) This is the 1/24 Scale 1965 Shelby Cobra 427 Convertible (Red) Diecast Model from Maisto.

    Out of stock

    $19.95

  • 1/24 2017 Ford Mustang GT (Blue) (Snap)

    Revell Monogram 1/24 2017 Ford Mustang GT (Blue) (Snap)

    Out of stock

    1/24 2017 Ford Mustang GT (Blue) (Snap)

    Out of stock

    $16.95

  • 1/24 Caterpillar D7E Bulldozer, DCM25002 1/24 Caterpillar D7E Bulldozer, DCM25002

    Diecast Masters 1/24 Caterpillar D7E Bulldozer, DCM25002

    Out of stock

    Product Details Key Features Genuine Caterpillar® licensing and quality Approximate battery run time: 30 min off-road use Light and sound function Forward/reverse motion & turn via independent track control Blade control Rear tines/rippers (manual control) In The Box (1) 1/24 Caterpillar D7E Bulldozer (1) 2.4GHz fully functioning transmitter (1) USB charger with cable (1) DCM250000 Lithium Battery (2) AAA Batteries Needed to Complete Nothing! Everything you need to operate is included.

    Out of stock

    $89.99

  • 14500mAh Lithium Battery: 1/24 Series, DCM250000

    Diecast Masters 14500mAh Lithium Battery: 1/24 Series, DCM250000

    7 in stock

    14500mAh Lithium Battery: 1/24 Series, DCM250000

    7 in stock

    $12.99

  • DCM/Racemasters 1/24 Caterpillar 336 Excavator, DCM25001 DCM/Racemasters 1/24 Caterpillar 336 Excavator, DCM25001

    Diecast Masters DCM/Racemasters 1/24 Caterpillar 336 Excavator, DCM25001

    Out of stock

    Product Details Key Features Genuine Caterpillar® licensing and quality Light and sound function Approximate battery run time: 30 min off-road use Forward/reverse motion & turn via independent track control Cab rotation, front & rear arm, and bucket control In The Box (1) 1:24 RC CAT 336 Excavator (1) 2.4GHz fully functioning transmitter (1) USB charger with cable (1) DCM250000 Lithium Battery (2) AAA Batteries Needed to Complete Nothing! Everything you need to operate is included.

    Out of stock

    $92.99

  • 1/24 1969 Dodge Super Bee 440 Six Pack (2 in 1)

    Revell Monogram 1/24 1969 Dodge Super Bee 440 Six Pack (2 in 1)

    Out of stock

    1/24 1969 Dodge Super Bee 440 Six Pack (2 in 1)

    Out of stock

    $24.95

  • 1/24 1955 Ford F100 Street Rod Pickup Truck

    Revell Monogram 1/24 1955 Ford F100 Street Rod Pickup Truck

    Out of stock

    1/24 1955 Ford F100 Street Rod Pickup Truck

    Out of stock

    $16.95

  • AMT-1170, AMT 1/24 Reefer Semi Trailer

    AMT AMT-1170, AMT 1/24 Reefer Semi Trailer

    1 in stock

    AMT-1170, AMT 1/24 Reefer Semi Trailer AMT presents an authentic 1/24 scale replica of the refrigerator trailers hauling goods all over the world. Featuring parts molded in several colors, colorful decals, and real thermoplastic rubber tires, intermediate and advanced modelers can build themselves an exciting display model that will impress with its size, and its details! Ships in collectible illustrated packaging. KIT FEATURES: 1/24 scale Skill level 3 Over 100 parts Over 24” long when assembled Paint and cement not included Molded-in silver and black Thermoplastic rubber tires Movable Select-A-Point tandem sliding suspension Top-quality, colorful water-release decals Vintage-style illustrated packaging This product was added to our catalog on May 7, 2021

    1 in stock

    $69.99

  • AMT, American Superliner Semi Tractor, AMT1235 - Caloosa Trains And Hobbies

    AMT AMT, American Superliner Semi Tractor, AMT1235

    1 in stock

    Features 1:24 scale, skill level 3, paint and glue required 320+ parts Molded-in white, silver, grey, black, clear, and chrome Black vinyl tires The assembled kit is over 13 inches Ages 12+ Overview FOR EXPERIENCED MODELERS: AMT’s 1/24 scale American Superliner kit is a great project for any experienced big rig modeler. Add it to your collection today! BIG ON DETAIL: At over 13 inches long, the Superliner emphasizes size with authentic features, including 70+ chrome parts, stand up sleeper, steerable front axle, Cummins 475 HP diesel engine, tilting hood, dual chrome exhaust stacks, super-detailed interior with high back seats, 10 thermoplastic rubber tires and more! Fully paintable, with ALL NEW water-slide decals and vintage-style packaging. THE PERFECT PRESENT: Don’t know what to get dad for his birthday? Or maybe you have an avid hobbyist or collector in your life. This model kit makes an ideal gift for any occasion! TRUST AMT: We at AMT are modelers ourselves and we sweat the details, to make sure every kit produced is top quality in every way!

    1 in stock

    $94.95

Login

Forgot your password?

Don't have an account yet?
Create account

Item is added to cart