Replacement Body

333 products


  • TRA7542, Traxxas LaTrax Body Clips (12) TRA7542, Traxxas LaTrax Body Clips (12)

    Traxxas TRA7542, Traxxas LaTrax Body Clips (12)

    1 in stock

    TRA7542, Traxxas LaTrax Body Clips (12) This is a pack of twelve replacement LaTrax Body Clips. This product was added to our catalog on September 7, 2021

    1 in stock

    $2.00

  • TRA7511, Traxxas LaTrax 1/18 Rally Body (Clear) TRA7511, Traxxas LaTrax 1/18 Rally Body (Clear)

    Traxxas TRA7511, Traxxas LaTrax 1/18 Rally Body (Clear)

    5 in stock

    TRA7511, Traxxas LaTrax 1/18 Rally Body (Clear) This is an optional LaTrax 1/18 Rally Clear Body. This tough, rally-inspired body design is clear, pre-cut and ready for your custom paint job. Package includes a body and window/grill detail decals. This product was added to our catalog on September 7, 2021

    5 in stock

    $12.00

  • PTK-8278, ProTek RC "TruTorque" Lexan Scissors (Curved) PTK-8278, ProTek RC "TruTorque" Lexan Scissors (Curved)

    ProTek RC PTK-8278, ProTek RC "TruTorque" Lexan Scissors (Curved)

    9 in stock

    PTK-8278, ProTek RC "TruTorque" Lexan Scissors (Curved) This product was added to our catalog on December 16, 2021

    9 in stock

    $6.99

  • TRA4214, Traxxas Front Body Mount Post (2) TRA4214, Traxxas Front Body Mount Post (2)

    Traxxas TRA4214, Traxxas Front Body Mount Post (2)

    5 in stock

    TRA4214, Traxxas Front Body Mount Post (2) Front body mounting posts with screws (2) This product was added to our catalog on September 7, 2021

    5 in stock

    $2.75

  • PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear) PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear)

    PROTOform PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear)

    Out of stock

    PRM157140, Protoform Chevrolet Corvette C7 1/10 Pro-Mod Short Course Drag Car Body (Clear) The Protoform Clear Chevrolet Corvette C7 Pro-Mod Short Course Drag Car Body represents Protoforms long heritage with drag racing. This is Protoforms first body dedicated to the fast-growing SC Drag Racing class and will transform your Slash 2WD into a scale 1/4-mile beast with realistic details to give your SC drag car a super unique, race-inspired look. The C7 Pro-Mod Corvette body is a clean and convenient one piece design that allows any enthusiast to pick and apply their own unique paint scheme. Trim, mask and get creative with this slick drag body. Note: To create a more scale look, the body is designed with a narrower track width than a traditional SC body and will require some modifications to your 2wd Slash® in order to fit correctly. Here is the list of modifications needed to fit: Pro-Line Extended Body Mounts for Slash 2wd Tech tip: install the front mounts upside down to get the nose of the body as low as possible! Traxxas® Bandit® Front Arms - TRA2531X Traxxas® Bandit® Rear Arms - TRA2750R Traxxas® Bandit® Front Caster Blocks - TRA2432 Traxxas® Bandit® Steering Blocks - TRA3636 Traxxas® Bandit® Axles - TRA2437 Traxxas® King Pins - TRA3740 Traxxas® Front Camber Turnbuckles - TRA2444 Traxxas® Rear Turnbuckles - TRA2443 Traxxas® Toe Link Turnbuckles - TRA2445 Shorten Rear Drive Shafts Remove Front Bumper Features: Modern, sleek Pro-Mod styling Incredible scale details Officially-licensed by General Motors 1-piece design Made in the USA from durable polycarbonate Specifications: Length: 25.5" (647mm) Front Width: 11.125" (282mm) Height: 11.25" (285mm) Wheelbase: 13.2" (335mm) Compatible with: Slash® 2wd Modified into a narrow Pro-Mod Drag Car  Includes:  (1) Clear Chevy® Corvette™ C7 Pro-Mod Body (1) Detailed Decal sheet Paint-then-peel over spray film & window masks This product was added to our catalog on August 28, 2021

    Out of stock

    $50.00

  • HRATRX15GPL06, Hot Racing Traxxas Power Up Gear Adapter (Long) HRATRX15GPL06, Hot Racing Traxxas Power Up Gear Adapter (Long)

    Hot Racing HRATRX15GPL06, Hot Racing Traxxas Power Up Gear Adapter (Long)

    Out of stock

    HRATRX15GPL06, Hot Racing Traxxas Power Up Gear Adapter (Long) The Hot Racing Traxxas Power Up Gear Adapter fits the 1/10 Traxxas Bandit, Jato 3.3, Rustler, Slash 2WD, and Stampede 2WD. Features: Eliminates the transmission slipper assembly to transmit all power to wheels without slip Lighter rotating mass for faster acceleration Great for stock off road classes or oval racing! CNC machined 6061 aluminum, anodized blue NOTE: Please note the slipper function is eliminated, placing additional strain on drivetrain components which may lead to increased wear Fits vehicles using Traxxas 5556 slipper. Completely replaces slipper assembly, including pressure plates and slipper pads Fits: Bandit, Jato 3.3, Rally, Rustler, Slash 2WD and Stampede 2WD This product was added to our catalog on March 6, 2021

    Out of stock

    $16.99

  • HRAAC03EZ01, Hot Racing 1/10 Aluminum EZ Pulls w/Body Clips (Black) (4)

    Hot Racing HRAAC03EZ01, Hot Racing 1/10 Aluminum EZ Pulls w/Body Clips (Black) (4)

    3 in stock

    HRAAC03EZ01, Hot Racing 1/10 Aluminum EZ Pulls w/Body Clips (Black) (4) This product was added to our catalog on December 16, 2021

    3 in stock

    $6.99

  • BDY-LM16, Bittydesign Liquid Mask (16oz)

    Bittydesign BDY-LM16, Bittydesign Liquid Mask (16oz)

    6 in stock

    BDY-LM16, Bittydesign Liquid Mask (16oz) This product was added to our catalog on December 16, 2021

    6 in stock

    $24.99

  • MR326, McAllister Racing "EL Jefe" NextGen Camaro 1/18th

    McAllister Racing MR326, McAllister Racing "EL Jefe" NextGen Camaro 1/18th

    1 in stock

    MR326, "EL Jefe" NextGen Camaro 1/18th Little Cars for BIG FUN! The “EL Jefe” is a 1/18th scale NextGen Camaro body designed specifically for the Traxxas LaTrax Rally 1/18 4wd. We nicknamed this body "EL Jefe" aka "The Boss" because this spicy little guy will be taking command on the track, in the driveway, or across your living room!  Included with the body: Easy to follow cut lines, pre-cut decal detail sheet, pre-cut window masks, spoiler, and hardware. The last picture is how the mounts need to be set up to best suit the body. This body will require the chassis to be used in the short wheelbase to match perfectly with the wheel wells. Made in the USA with genuine .030 American Made Lexan. This product was added to our catalog on June 1, 2023

    1 in stock

    $29.99

  • PTK-8203, ProTek RC "TruTorque" Lexan Body Reamer PTK-8203, ProTek RC "TruTorque" Lexan Body Reamer

    ProTek RC PTK-8203, ProTek RC "TruTorque" Lexan Body Reamer

    3 in stock

    PTK-8203, ProTek RC "TruTorque" Lexan Body Reamer This product was added to our catalog on December 16, 2021

    3 in stock

    $22.49

  • TRA3935, Traxxas Angled Body Clips (90-degrees) (10) TRA3935, Traxxas Angled Body Clips (90-degrees) (10)

    Traxxas TRA3935, Traxxas Angled Body Clips (90-degrees) (10)

    8 in stock

    TRA3935, Traxxas Angled Body Clips (90-degrees) (10) This is a pack of 10 small size body clips for Traxxas vehicles, such as the Traxxas Revo. These are the really small clips used to clip the radio tray assembly together and hold on the fuel tank. This product was added to our catalog on September 7, 2021

    8 in stock

    $4.50

  • TRA1914R, Traxxas Front & Rear Body Mount Set w/Hardware TRA1914R, Traxxas Front & Rear Body Mount Set w/Hardware

    Traxxas TRA1914R, Traxxas Front & Rear Body Mount Set w/Hardware

    2 in stock

    TRA1914R, Traxxas Front & Rear Body Mount Set w/Hardware This product was added to our catalog on September 7, 2021

    2 in stock

    $6.00

  • TAM87179, Tamiya 5mm Masking Tape (for Curves) TAM87179, Tamiya 5mm Masking Tape (for Curves)

    Tamiya TAM87179, Tamiya 5mm Masking Tape (for Curves)

    6 in stock

    TAM87179, Tamiya 5mm Masking Tape (for Curves) This is a single roll of 5mm Wide Masking Tape from Tamiya. This tape is ideal for curves. This product was added to our catalog on February 20, 2022

    6 in stock

    $6.50

  • Traxxas Ford Mustang Fox Body Traxxas Ford Mustang Fox Body

    Traxxas Traxxas Ford Mustang Fox Body

    2 in stock

    Traxxas Ford Mustang Fox Body The Traxxas Ford Mustang Fox Body is a great way to add custom style and classic looks to the Traxxas Drag Slash. Traxxas has re-produced a highly detailed Ford licensed 5.0 Mustang notchback body, familiar to drag racing enthusiasts. Integrated scale details such as the grille, cowl induction style hood scoop and rear wing sets this body apart from the rest. Includes: Molded side mirrors and rear wing  Bumper foam Body posts Mounting hardware This product was added to our catalog on July 19, 2022

    2 in stock

    $69.99

  • PRO608700, Extended Front and Rear Body Mounts:SLH 4x4 PRO608700, Extended Front and Rear Body Mounts:SLH 4x4

    Pro-Line PRO608700, Extended Front and Rear Body Mounts:SLH 4x4

    5 in stock

    PRO608700, Extended Front and Rear Body Mounts:SLH 4x4

    5 in stock

    $17.99

  • PTK-8486, ProTek RC Sprue Side Cutter PTK-8486, ProTek RC Sprue Side Cutter

    ProTek RC PTK-8486, ProTek RC Sprue Side Cutter

    13 in stock

    PTK-8486, ProTek RC Sprue Side Cutter The ProTek RC Sprue Cutter is a great option for cutting plastic parts free, modifying tire pins and even thin gauge wire. Made from hardened stainless steel, these cutters feature comfortable grips with a heavy-duty return spring for better cutting control. Package includes one sprue cutter. Features: Precision cut blades with tapered edge Made from hardened stainless steel Comfortable soft grips Perfect for cutting parts and trimming tires This product was added to our catalog on September 30, 2022

    13 in stock

    $13.99

  • TRA3619, Body mounts, front & rear/ body mount posts, front & rear (adjustable)/ 2.5x18mm screw pins (4) TRA3619, Body mounts, front & rear/ body mount posts, front & rear (adjustable)/ 2.5x18mm screw pins (4)

    Traxxas TRA3619, Body mounts, front & rear/ body mount posts, front & rear (adjustable)/ 2.5x18mm screw pins (4)

    4 in stock

    3619 - Body mounts, front & rear/ body mount posts, front & rear (adjustable)/ 2.5x18mm screw pins (4) TRA3619, BODY MOUNTSPOST F&R ADJSTBLE This product was added to our catalog on September 7, 2021

    4 in stock

    $9.00

  • TRA7111, Traxxas 1/16 E-Revo Body w/Grille & Light Decals (Clear) TRA7111, Traxxas 1/16 E-Revo Body w/Grille & Light Decals (Clear)

    Traxxas TRA7111, Traxxas 1/16 E-Revo Body w/Grille & Light Decals (Clear)

    4 in stock

    TRA7111, Traxxas 1/16 E-Revo Body w/Grille & Light Decals (Clear) This is a replacement Traxxas 1/16 E-Revo Clear Body with Grill & Light Decals, and is intended for use with the Traxxas 1/16 E-Revo. This product was added to our catalog on May 7, 2021

    4 in stock

    $22.00

  • MR286, McAllister Racing 1969 Mustang VTA MR286, McAllister Racing 1969 Mustang VTA

    McAllister Racing MR286, McAllister Racing 1969 Mustang VTA

    1 in stock

    MR286, 1969 Mustang VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Window mask, overspray film, and Detail Decals included with body. Note: This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars. This product was added to our catalog on June 1, 2023

    1 in stock

    $29.99

  • PTK-1540, ProTek RC "TruShield" RC Car Detail Spray (13oz)

    ProTek RC PTK-1540, ProTek RC "TruShield" RC Car Detail Spray (13oz)

    4 in stock

    PTK-1540, ProTek RC "TruShield" RC Car Detail Spray (13oz) This is a 13 ounce can of ProTek R/C "TruShield" RC Car Detail Spray. ProTek R/C understands that how your ride looks is as important as how well it performs. We all want to shine, but a clean car is not all about showing off; dirt and grime can slow a car down, kill bearings and lower overall performance. Sometimes running at your peak can just be a wash away. The ProTek R/C TruShield is a one step easy to use product that provides a quick detail shine. Designed to be used on all surfaces of your dirt machine, TruShield provides a glossy protective coating that is dry to the touch when used as directed. It can be sprayed on plastic, metal, rubber and chrome. The product is user friendly, simple to use, dries fast and will not leave an oily residue or sticky finish. Simply spray on a cloth or vehicle and wipe to a shine! It’s the fastest and easiest way to detail and shine your dirt machines. TruShield thoroughly and effectively shines and promotes luster, and will not attract dirt, dust or general grime. Use Recommendations: Use as the final step after cleaning your car or when you want to add a "Tru" shine to your equipment. Shake well and spray a light coat onto your surface, or spray onto clean cloth and allow to penetrate for a few minutes. Wipe off to leave an even film. Remove any excess residue. When it comes to high quality products that are backed by incredible customer support, ProTek R/C has you covered with the products you need to keep your rig ready for action, no matter what. This product was added to our catalog on December 16, 2021

    4 in stock

    $14.99

  • TRA9862X, Traxxas Roll bar (assembled with LED lights) (fits #9811 or 9812 series bodies)

    Traxxas TRA9862X, Traxxas Roll bar (assembled with LED lights) (fits #9811 or 9812 series bodies)

    6 in stock

    TRA9862X, Traxxas Roll bar (assembled with LED lights) (fits #9811 or 9812 series bodies) Add more scale detail to your 9811-series TRX-4M™ K10 and 9812-series TRX-4M™ F-150® bodies with this chrome roll bar with working LED lights. This product was added to our catalog on February 6, 2024

    6 in stock

    $20.00

  • Traxxas X-Maxx Pre-Painted Body Traxxas X-Maxx Pre-Painted Body

    Traxxas Traxxas X-Maxx Pre-Painted Body

    1 in stock

    Traxxas X-Maxx Pre-Painted Body Traxxas X-Maxx Pre-Painted Body. This replacement body comes trimmed and pre-painted for ease of use. ProGraphix are applied from the factory for perfect fit and finish. To complete the finish, the body comes with body mounts, rear body support and tailgate preinstalled. Package includes one pre-painted body and one decal sheet intended for the Traxxas X-Maxx. This product was added to our catalog on May 7, 2021

    1 in stock

    $69.95

  • BDYDG-ZL21, Bittydesign ZL21 1/10 Pro No Prep Street Eliminator Drag Racing Body (Clear) BDYDG-ZL21, Bittydesign ZL21 1/10 Pro No Prep Street Eliminator Drag Racing Body (Clear)

    Bittydesign BDYDG-ZL21, Bittydesign ZL21 1/10 Pro No Prep Street Eliminator Drag Racing Body (Clear)

    3 in stock

    BDYDG-ZL21, Bittydesign ZL21 1/10 Pro No Prep Street Eliminator Drag Racing Body (Clear) The Bittydesign ZL21 Pro Drag Racing Body was developed to provide racers with an extraordinary looking body, that has the aerodynamics and quality needed to give an edge over the competition. Taking cues from modern muscle car design, the ZL21 offers an incredibly aggressive appearance, manufactured with Bittydesign's obsessive quality standards. But the ZL21 offers more than just a breathtaking look! The advanced aerodynamics help to put all the power to the ground, providing incredible stability under acceleration in a platform that makes it a great choice for both prep track street eliminator class, as well as parking lot no prep racing. Accessories that make the difference! Every detail was considered during the design phase. The ZL21 includes a variety of accessory parts that add detail, and aid in performance. A rear wing extension is included to improve performance, helping to generate clean air and reduce turbulence in the rear of the car. A front splitter is included to create a more aggressive appearance, as well as help increase front end stability. Plus, a set of zoomie style pipes and turbo style exhaust are included to add more detail and can be installed if you choose. But that's not all - if the ultimate performance is desired, the optional Pro-drag wing is available (BDYDG-ZL21W - not included) to create an even more aggressive look and increase rear end stability.   NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.     Features: Advanced aerodynamic design for no prep/street eliminator racing Molded from genuine 1mm thick Lexan® polycarbonate  Includes rear wing, front splitter and two exhaust options Optional Pro-drag wing is available separately (BDYDG-ZL21W - not included) Accessory installation hardware included Sold clear with overspray film applied Includes pre-cut decal sheet and the window mask  Specifications: Length: 640mm Width: 280mm Height: 164mm Wheelbase: 330mm  NOTE: The body shell was designed on the Associated DR10 chassis, but can also be mounted on Losi 22S Drag chassis, Traxxas Slash* 2wd Drag Car & Traxxas Drag Slash 1/10. For installation on Slash 2wd chassis it is necessary to purchase the following Traxxas parts: TRA2531X, TRA3636, TRA2750R, TRA2432, TRA2444, TRA2437, TRA3740, TRA2445, TRA2443, shorten rear drive shafts and remove the front bumper.  Exhaust Installation: Choose which exhaust to install, and paint.   Remove material along cut lines with quality scissors or dremel - remove the longer section to install the zoomie style pipes, and the shorter section to install the single turbo pipe.  Apply double sided tape over the exhaust plate and press it inside the body to secure the exhaust to the body. This product was added to our catalog on December 16, 2021

    3 in stock

    $59.99

  • TRA6811R, Traxxas Slash 4X4 Heavy Duty Body (Clear) TRA6811R, Traxxas Slash 4X4 Heavy Duty Body (Clear)

    Traxxas TRA6811R, Traxxas Slash 4X4 Heavy Duty Body (Clear)

    Out of stock

    TRA6811R, Traxxas Slash 4X4 Heavy Duty Body (Clear) This is an optional Traxxas Slash 4X4 Clear Heavy Duty Body, intended for use with the Traxxas Slash 4X4 and Traxxas Slayer short course trucks. This clear body is a blank canvas, ready for you to add your own unique paint scheme, and has been factory trimmed. This body includes window masks and decals. This product was added to our catalog on September 7, 2021

    Out of stock

    $45.00

  • Sale -17% PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car

    Pro-Line PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car

    Out of stock

    PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car Fits: Losi® 22S™ No Prep Drag Car (LOS03035 & LOS03041) Slash® 2wd Drag Car AE DR10

    Out of stock

    $64.99$54.00

  • PRM626300, PROTOshine Lexan Body Cleaner

    PROTOform PRM626300, PROTOshine Lexan Body Cleaner

    Out of stock

    PRM626300, PROTOshine Lexan Body Cleaner

    Out of stock

    $15.50

  • TRA8086, LED expedition rack scene light kit (fits #8111 body, requires #8028 power supply)

    Traxxas TRA8086, LED expedition rack scene light kit (fits #8111 body, requires #8028 power supply)

    3 in stock

    8086 - LED expedition rack scene light kit (fits #8111 body, requires #8028 power supply) TRA8086, LED EXPEDITION RACK LIGHT COMPLETE 8111 TRX-4® Sport LED Scene Lights attach directly to the Expedition Rack to illuminate the sides of the trail. Four separate LED lights tilt up or down to surround the TRX-4 with light. The LED scene lights require TRX-4 Sport Expedition Rack #8120, or 8120X. Accessory part for these models: TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® 2021 Ford® Bronco TRX-4® Equipped with Traxx® TRX-4® Mercedes-Benz® G 500® 4X4² TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit This product was added to our catalog on September 7, 2021

    3 in stock

    $20.00

  • PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm) PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm)

    PROTOform PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm)

    2 in stock

    PRM1543-30, Protoform Cadillac ATS-V.R Touring Car Body (Clear) (190mm) This is the 190mm Protoform Cadillac ATS-V.R Clear Touring Car Body. Cadillac Racing stormed back into the motorsports spotlight in 2015 with their factory-works ATS-V.R race car, the third generation of V-Series race cars. Built to international FIA GT3 specifications, this pedigree allows it to potentially run in more than 30 different GT series around the world. The ATS-V.R has proven a success with top drivers Johnny O’Connell and Andy Pilgrim at the wheel, scoring multiple overall wins and pole positions in the World Challenge series. PROTOform is proud to bring the racing heritage of Cadillac back to 1/10 190mm Touring Cars with our officially-licensed rendition of the Cadillac ATS-V.R. With every detail of the full-scale race car captured and an extensive decal sheet, racers will appreciate the ultra-realistic looks for racing in classes such as USGT, GT10, and Spec Grand Touring. This 2-door coupe race body is formed from genuine .030” lexan and includes injection-molded wing struts to support a unique rear wing design. The wing features 2 different levels of trim, a 10mm vertical section for sanctioned USGT racing and a 20mm upper laid-back trim for club racing, making the PROTOform ATS-V.R suitable to any kind of GT-class rules. As always, wing mounting hardware, and paint-then-peel overspray film are included. Features: Made with Genuine GE .030 lexan Replica body of the factory-works Cadillac Racing GT3-spec race car Molded wing struts and dual-trim wing design Officially-licensed by General Motors Proudly Made in the USA Specifications: Length: 17.5" (445mm) Width: 7.63" (194mm) Height: 4.29 (109mm) Wheelbase: 10.2" (258mm) Includes: Clear Cadillac ATS-V.R body (2) Molded nylon wing struts Mounting hardware Extensive decal sheet Paint-then-peel over spray film, & window masks This product was added to our catalog on July 16, 2021

    2 in stock

    $35.99

  • MR707, McAllister Racing Foam Car Stand #707 MR707, McAllister Racing Foam Car Stand #707

    McAllister Racing MR707, McAllister Racing Foam Car Stand #707

    Out of stock

    MR707, McAllister Foam Car Stand #707 -Foam car stand embossed with the classic McAllister flying M. -Lightweight and durable foam that will not be damaged by tire prep or most other RC products. -Measures: 7 x 4 x 1.5" This product was added to our catalog on June 1, 2023

    Out of stock

    $13.99

  • PRM155730, Protoform Chevrolet Corvette C7.R Touring Car Body (Clear) (190mm) PRM155730, Protoform Chevrolet Corvette C7.R Touring Car Body (Clear) (190mm)

    PROTOform PRM155730, Protoform Chevrolet Corvette C7.R Touring Car Body (Clear) (190mm)

    Out of stock

    PRM155730, Protoform Chevrolet Corvette C7.R Touring Car Body (Clear) (190mm) This is the Protoform 190mm Chevrolet Corvette C7.R Clear Touring Car Body. Chevrolet’s Corvette C7.R has the set the worldwide sportscar racing scene on fire since its debut, capturing the triple-crown of GTLM-class endurance racing with wins at the 24 Hours of Le Mans, 24 hours of Daytona and 12 Hours of Sebring. PROTOform brings Corvette Racing’s championship heritage to USGT class racing with the officially-licensed Corvette C7.R race body. From the signature Corvette muscular stance and swept-back roofline, to the large front splitter and side vents, every detail of the 1:1 race car is captured to add scale realism to the world of 1:10 scale 190mm touring cars. The extensive decal sheet lets you deck out your C7.R with Corvette branded windshield headers, “Jake” skull hood logo, number plates, and USA flags. Included with the body is an add-on rear wing with the USGT-sanctioned 10mm trim height, nylon wing struts, and mounting hardware. This body fits popular 190mm touring cars and is formed from high quality .030” polycarbonate. As always, window masks and paint-then-peel overspray film are included. Features:  Incredible scale details Officially-licensed by General Motors Comprehensive decal sheet included USGT Approved Made in the USA Specifications: Length: 17.5" (444.5mm) Width: 7.63" (194mm) Height: 4.01" (102mm) Wheel Base: 10.1" (256mm) Includes: Clear Chevrolet® Corvette™ C7.R body Nylon wing struts (2pcs) Wing Mounting Hardware Extensive Decal Sheet Window masks & paint-then-peel overspray film This product was added to our catalog on August 16, 2021

    Out of stock

    $33.00

  • TRA2417, Traxxas Bandit Pre-Cut Body Set (Clear) TRA2417, Traxxas Bandit Pre-Cut Body Set (Clear)

    Traxxas TRA2417, Traxxas Bandit Pre-Cut Body Set (Clear)

    Out of stock

    TRA2417, Traxxas Bandit Pre-Cut Body Set (Clear) The Traxxas Bandit Body Set comes pre-cut and is the best way for you to give a custom look to your Bandit. Package includes one decal sheet, wing and body set with overspray film. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted. Needed to Complete: Paint for body Misc. Tools for Assembly This product was added to our catalog on April 7, 2021

    Out of stock

    $20.00

  • ARA414002, Arrma Infraction 4X4 Mega Body (Clear) ARA414002, Arrma Infraction 4X4 Mega Body (Clear)

    ARRMA ARA414002, Arrma Infraction 4X4 Mega Body (Clear)

    Out of stock

    ARA414002, Arrma Infraction 4X4 Mega Body (Clear) Arrma Infraction 4X4 Mega Clear Body. This clear body has been factory trimmed and is ready for your custom paint to create a personalized, one of a kind look. Package includes optional clear body, decals, window mask, clear wing and hardware.  NOTE:  Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.  Roof skids and roll bars not included. Features: High-quality body molded from tough polycarbonate material Clear & ready for your custom paint Includes wing and wing attachment fasteners Includes: (1) INFRACTION 4X4 All Road MEGA Trimmed Body (Clear) (1) Clear Wing (1) Decal Sheet (1) Window Mask (3) M3 8mm Button Head Screw (3) M3 Nylon Locknut (3) M3 8mm Washer This product was added to our catalog on February 1, 2022

    Out of stock

    $54.99

  • TRA6811, Traxxas Slash 4X4 Body (Clear) TRA6811, Traxxas Slash 4X4 Body (Clear)

    Traxxas TRA6811, Traxxas Slash 4X4 Body (Clear)

    Out of stock

    TRA6811, Traxxas Slash 4X4 Body (Clear) This is a replacement Traxxas Slash 4X4 Body, and will also work with the Traxxas Slayer. This body is clear and requires painting, as well as final trimming. This body includes window masks and decals. This product was added to our catalog on September 7, 2021

    Out of stock

    $37.00

  • TRA8087, LED light bar, roof lights (fits #8111 body, requires #8028 power supply)

    Traxxas TRA8087, LED light bar, roof lights (fits #8111 body, requires #8028 power supply)

    3 in stock

    8087 - LED light bar, roof lights (fits #8111 body, requires #8028 power supply) TRA8087, LED LIGHT BAR TRX-4 FITS 8111 This product was added to our catalog on September 7, 2021

    3 in stock

    $22.00

  • MR295, McAllister Racing 1970 Pontiac Trans Am VTA

    McAllister Racing MR295, McAllister Racing 1970 Pontiac Trans Am VTA

    Out of stock

    MR295, 1970 Pontiac Trans Am VTA 1/10th scale, 8" wide (200mm), 10" wheelbase (255mm). Window mask, overspray film, and Detail Decals included with body. This is a clear, unpainted body only. Intended for Pan Cars and Touring Cars.Genuine Made in USA Lexan. This product was added to our catalog on June 1, 2023

    Out of stock

    $29.99

  • PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car

    PROTOform PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car

    Out of stock

    PRM158500, 1/10 Nissan GT-R R35 Clr Body: Losi 22S Drag Car

    Out of stock

    $46.99

  • BDYF1-T6C, Bittydesign "Type-6C" 1/10 F1 Body (Clear)

    Bittydesign BDYF1-T6C, Bittydesign "Type-6C" 1/10 F1 Body (Clear)

    3 in stock

    BDYF1-T6C, Bittydesign "Type-6C" 1/10 F1 Body (Clear)This product was added to our catalog on December 16, 2021

    3 in stock

    $27.99

  • PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear) PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear)

    PROTOform PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear)

    Out of stock

    PRM153530, Protoform 1971 Pontiac Firebird Trans Am Vintage Racing Body (Clear) This is the Protoform 1971 Pontiac Firebird Trans Am VTA Body. Vintage Trams Am class racing has taken off in the past few years as an opportunity for racers to break in to on-road R/C, providing close racing, scale realism and warm and fuzzy feelings of the good ol’ days of American road course racing. The Pontiac Firebird Trans Am was one of the signature cars of the former full-scale series, and now PROTOform has captured its trademark look in the release of the 1971 model for your VTA class R/C Touring Car. From its aggressive front “beak”, to the duck tail-style rear spoiler, to the mother of all macho items, – the shaker hood scoop – no detail was overlooked. The front nose cone is molded separately, and when mounted with the 2mm screws and/or liquid adhesive, it becomes an integral part of the body. Because this area of a race body is the most prone to racing wear and tear, a second nose is included.  This officially licensed product is produced in genuine .030 Lexan® material and meets all VTA Class rules. The clear body comes with protective overspray film, window masks, detailed decal sheet that lets you choose to style your Firebird as a full-blown race car, or head-turning street machine. Features: Made with Genuine GE .030 lexan Fits touring cars set up for Vintage Trans Am Rules Exceptional scale detail and realism Fully Licensed by General Motors Specifications: Length: 17.87” (454mm) Width (front wheelwells): 7.8” (198mm) Width (rear wheelwells): 8.15” (207mm) Height: 4.17” (106mm) Wheelbase: 10.24” (260mm) This product was added to our catalog on May 3, 2023

    Out of stock

    $35.99

  • TRA7616, Traxxas Latrax Desert Prerunner Body (Clear) TRA7616, Traxxas Latrax Desert Prerunner Body (Clear)

    Traxxas TRA7616, Traxxas Latrax Desert Prerunner Body (Clear)

    3 in stock

    TRA7616, Traxxas Latrax Desert Prerunner Body (Clear) Traxxas Latrax Desert Prerunner Body. This product was added to our catalog on April 30, 2021

    3 in stock

    $15.00

  • PRO3549-00, Pro-Line 1978 Chevrolet Malibu No Prep Drag Racing Body (Clear) PRO3549-00, Pro-Line 1978 Chevrolet Malibu No Prep Drag Racing Body (Clear)

    Pro-Line PRO3549-00, Pro-Line 1978 Chevrolet Malibu No Prep Drag Racing Body (Clear)

    Out of stock

    PRO354900, 78 Chevy Malibu Clear Drag Body:22S/DR10/Slash 2wd 1/10 1978 Chevrolet Malibu Clear Body: Drag Car Fits: Losi® 22S™ No Prep Drag Car Slash® 2wd Modified into a narrow Pro-Mod Drag Car AE DR10 The Pro-Line 1978 Chevrolet Malibu No Prep Drag Racing Body has been specifically designed for the growing No-Prep SC Drag Racing scene! Bowtie fans will love this ultra-scale body that captures all the signature details of Mark Micke's 4,700hp, twin-turbo, 200mph+ G-body Malibu. To create the most scale look possible, the body is designed with a narrower track width than a traditional SC body. It is a direct fit on the AE DR10, but a 2wd Slash will require some modifications to fit correctly. See build video below. Pro-Line's team of innovators are also offering some exclusive 3D BONUS Parts, available for download, free of charge! Check the resources tab above to grab these 3D files to print on your 3D printer, or send to an online print shop. Bullhorn Exhaust Pipe: Ream a 14.5mm diameter hole in your body and insert it from the inside. Attach using Shoo-goo on the flange. Rear Body Post Reposition Bracket: Use these brackets between your Slash 2wd rear shock tower and PL Extended Body Mounts to move the rear posts 50mm rearwards. This will locate the Secure-Loc Caps on the flat trunk surface rather than in the rear windshield. This is not required but provides a better and cleaner looking fit. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.  Features: Fully Licensed 1978 Chevy® Malibu™ Perfect for No-Prep Drag Racing Incredible Scale Replica of Mark Micke’s 1:1 Malibu™ Drag car Optional add-on Rear Spoiler with Hardware Included Made from Durable Polycarbonate Paint-then-peel Overspray Film Included Made in the USA, since 1982   Specifications: Length: 25.5" (647mm) Width Front: 11.4" (289mm) Width Rear: 11.6" (295mm) Height: 6.1" (156mm) Wheelbase: 13.0" (330mm) Includes: 1978 Chevy® Malibu™ Clear Body and Spoiler Rear Spoiler Hardware Detailed Decal Sheet Window Masks This product was added to our catalog on October 9, 2021

    Out of stock

    $57.00

  • Traxxas Sledge RC Body