Drag Cars

LOS03035, Losi 22S '69 Camaro No Prep 1/10 RTR Brushless Drag Race Car w/Spektrum SLT3 2.4GHz Radio The Losi 22S '69 Camaro No Prep 1/10 RTR Drag Race Car combines the innovative design and the quality workmanship drivers expect from Losi, in a ready to run package that makes it easy to hit the track and make fast passes. The 69 Camaro has been carefully crafted to offer an authentic and scale look, while still fitting into the rules and regulations set by the No-Prep Drag Racing scene. It has all the advantages of an aluminum chassis such as electronics protection, side impact guards, and a clean wire management system with plenty of 22S option parts. It's designed with racers in mind with many outstanding features including officially licensed Mickey Thompson tires, limited travel oil filled front and rear shocks, low center of gravity rear shock tower, extended body mounts, optional heavy duty sway bar, adjustable weight front bumper, elevated transmission, adjustable turnbuckles, and a fully adjustable wheelie bar. You get an all-metal gear transmission for concrete dependability, a Spektrum SLT3 transmitter and dual protocol receiver, Spektrum Firma 100 amp Smart ESC, and Spektrum Firma 6500kv brushless motor. Features: Spektrum Firma 100 Amp Smart ESC Spektrum Firma 6500kv Brushless Motor Spektrum SLT3 Transmitter and Dual Protocol Receiver 22S aluminum chassis Officially Licensed 1969 Chevrolet Camaro Body Officially Licensed Summit Racing Trim Scheme (Available on the T1 version) LED Lights Mickey Thompson branded Large Rear Drag Racing Slicks Mickey Thompson branded Low Drag, Front Tires All Metal Gear Transmission Elastomer Battery Straps Full Adjustable Wheelie Bar Aluminum Option Parts Available In Depth Features: Spektrum Firma 100 Amp Smart ESC: Spektrum Firma 100A Smart ESC for surface vehicles (With Drag specific programming) is waterproof and delivers power and intelligence all-in-one. Without additional sensors or modules, they feed battery and ESC telemetry data straight to your radio in real time, all over one connection. Spektrum Firma 6500Kv Brushless Motor: The Firma 6500Kv brushless motor features a lg 4-pole 8-magnet rotor design, CNC machined aluminum housing, insulated high purity copper windings, high-quality alloy steel 3.175mm (1/8") output shaft, and precision bearings for high durability and smooth rotation. Preinstalled 4mm gold plated bullet connectors. SLT3 3-Channel SLT Radio System: The SLT3 is much more than an economical 3-channel radio. Together with the included SR315 receiver, it's the most affordable radio system available that offers Spektrum quality range, response, and interference resistance while also laying the groundwork to upgrade later for superior DSMR® control and Smart connectivity. Its SLT protocol is compatible with the Spektrum SPMSLR300 (SLT Protocol Receiver) and legacy Tactic receivers, such as the TR325, that are included with some ready-to-run vehicles. Spektrum SR315 Dual Protocol Receiver: The SR315 dual protocol receiver included with the SLT3 radio system not only supports the transmitter's SLT 2.4GHz technology but is also compatible with Spektrum DSMR® protocol. It's ready when you are for stepping up to next-level transmitters such as the DX5 Pro, DX5 Rugged, and DX5C. The receiver supports Spektrum Smart Technology, too — paving the way for you to enjoy Smart connectivity advantages when using it with Smart transmitters, ESCs, and batteries. Mickey Thompson ET Drag Tires: The Mickey Thompson licensed rear tires will surely give you a great grip on the road, making sure you have the ultimate traction for the high powered brushless system that is included. Mickey Thompson Ultra Light Front Runner Tires: Mickey Thompson licensed front tires will provide you with plenty of tracking while having lower drag characteristics. 3mm Aluminum Chassis: The Drag Car Roller comes standard with a 3mm Aluminum chassis to provide accurate and positive grip to the road when you are pushing the limits of power and traction. This chassis is designed with electronics protection, side impact guards, and a clean wire management system. Front Bumper with Adjustable Weight Placement: Fine tune the weight of the front end to keep it under control and on the ground. Precise Adjustable Wheelie Bar: The Drag Car Roller incorporates an adjustable wheelie bar that lets you dial in the exact position for your wheelie bar run after run. Elastomer Battery Straps and Adjustable Battery Position: Fine tune the position of your battery with the addition of elastomer battery straps and make your battery changes quick and easy. No more messing with clunky hook and loop. Simply slap your battery in, pull across the strap and hook it. Oil-filled Internal limited Coil-Over Spring Shocks: These shock absorbers help keep the car incredibly stable and so you can maintain total control on even the toughest drag strips. Internal limiters help eliminate body roll and keep the car planted to the track. Bleeder Shock Caps: Bleeder caps help you fine tune your shocks and get the perfect feel every time. Fully Adjustable Turnbuckles: For added adjustability and tune-ability, adjustable turnbuckles come standard. All Metal Gear Transmission: The Drag Car Roller comes with an all metal gear transmission for bullet-proof reliability to withstand anything you throw at it. Get your car down the lane without the fear of a broken transmission gear! Sealed Gear Differential: The sealed gear differential comes standard with 500,000k diff oil installed allowing you to throw as much power as you want. Specifications: Scale: 1/10 Length: 25.1" (638 mm) Width: 11.08" (281 mm) Height: 6.6" (168 mm) Wheelbase: 13.1" (333 mm) Drivetrain: 2WD Power Type: Electric Motor Type: Brushless - Sensorless Gear Pitch: 48P Pinion: 16T Internal Gear Ratio: 2.43:1 Completion Level: Ready-To-Run Includes: (1) Losi 1969 Camaro Drag Car RTR (1) Spektrum Firma 100 amp Smart ESC (installed) (1) Spektrum Firma 6500kv Brushless Motor (installed) (1) Spektrum SLT3 Transmitter and Dual Protocol Receiver (installed) (1) Product Manual Needed to Complete: 2-3S LiPo Battery with IC5/EC5 Connector LiPo Compatible Charger Assorted tools (see manual for details) This product was added to our catalog on October 21, 2021

Read more less

Losi 2WD Mini No Prep Drag Car with 1970 Chevelle Body! The Losi 1/16 1970 Chevelle 2WD RTR Mini No Prep Drag Car is built on the ever-popular Losi Mini-T and Mini-B chassis. This mini "No Prep" car is designed to give RC enthusiasts an easy way to enjoy the thrills of RC drag racing. While this car comes with a scale 1970 Chevelle body, the chassis features an adjustable wheelbase to allow you to use other optional mini on-road bodies. One of the most critical parts of "No Prep" RC is suspension tuning. This Mini chassis features a fully adjustable suspension system to fine-tune the launch and stability on the "big end". The transmission is based on the TLR (Team Losi Racing) 3-gear mid-motor transmission and features a full metal gear setup. An adjustable slipper clutch allows you to refine the power delivery. When it comes to power, this car has been given the Spektrum Firma 6000kV 2-in-1 brushless power system. In a 1/16 scale pass, the car only has to travel 82.5 feet. The integrated ESC on the back of the motor can be tuned to help you make a full pull. Features: Officially licensed 1970 Chevy Chevelle body with molded details and LED head and tail lights Factory-installed 6000Kv 2-in-1 brushless power system Built on the Mini 22 platform and based on the Losi Mini-T and Mini-B Multi-wheelbase chassis accommodates other on-road mini bodies Officially licensed Mickey Thompson front and rear tires with realistic looks and performance Specifications Scale: 1/16 Length: 17.75" (451 mm) Width: 6.5" (165 mm) Height: 4" (102 mm) Wheelbase: 9.4" (239 mm) Ground Clearance: 0.5 in (12.5mm) Weight: 1.5 lb (0.7kg) Drivetrain: 2WD Pinion: 17T Spur Gear: 60T Gear Pitch: 0.5 MOD Power Type: Electric Motor Type: Brushless Connector Type: EC2 Completion Level: Ready-To-Run Includes: (1) 1/16 Losi 1970 Chevelle 2WD Mini Drag Car (3) Optional Rear Toe-blocks (1) 7.4V 800mAh 2S 50C LiPo Hard Case w/ EC2 Connector (1) USB Charger (1) Spektrum SLT2 2-Channel 2.4GHz Transmitter (4) AA Transmitter Batteries (1) Product Manual Tools Needed to Complete: Nothing! Everything you need is included in the box! This product was added to our catalog on January 25, 2023

Read more less

94046-4, Drag Slash Mustang 5.0 This product was added to our catalog on March 29, 2023

Read more less

Team Associated DR10 RTR Brushless Drag Race Car Combo (Orange) w/2.4GHz Radio, DVC, Battery & Charger The Team Associated DR10 RTR Brushless Drag Race Car Combo with 2.4GHz Radio with DVC, Battery and Charger is a complete setup developed for No Prep racing, and built upon the 9-time R.O.A.R. Short Course National Championship platform. This DR10 Drag Race Car features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as Team Associated's DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box. The DR10 RTR Brushless LiPo Combo includes a Reedy Compact Balance Charger and Reedy 7.4V 2S LiPo Battery with T-plug to get you on the streets even faster.  Features: Based on the 9-time R.O.A.R. National Champion short-course race truck platform 2.4GHz 2-channel radio with DVC receiver (Dynamic Vehicle Control) featuring built-in adjustable gyro Three-position wheelie bar with optional large wheels High-torque, metal-gear Reedy servo with spring style servo saver Powerful Reedy 3300kV brushless motor Factory finished two-piece Reakt drag race body with rear spoiler Water-resistant high-powered Reedy brushless speed control with T-plug connector and Lipo low-voltage cutoff Aluminum 12mm big bore coil-over shock absorbers  Rear CVA driveshafts for more reliability Water-resistant enclosed receiver box Rugged steel turnbuckles for adjustable camber and front toe-in Lightweight front drag tires Durable and lightweight aluminum top shaft Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3S LiPo battery packs Metric hardware throughout 18 precision, rubber-sealed ball bearings Durable front and rear wide body mounts 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch Adjustable suspension geometry Vertical ball ends for roll center adjustments, front and rear Many Factory Team options already available Specifications: Scale: 1:10 Power: Electric Length: 609.6mm (24”) Width: 272mm (10.70”) Weight: 1850g (4.08 lbs) Wheelbase: 322mm (12.68”) Transmission Ratio: 2.6:1 Includes: (1) Team Associated DR10 RTR Brushless Drag Race Car Combo (1) 2.4GHz 2-channel Radio (1) Reedy 7.4V 2S LiPo Battery with T-plug (1) Reedy Compact Balance Charger Needed to Complete: (4) AA Alkaline batteries used in the transmitter This product was added to our catalog on July 30, 2021

Read more less

Team Associated DR10 RTR Brushless Drag Race Car w/2.4GHz Radio & DVC The Team Associated DR10 RTR Brushless Drag Race Car Combo with 2.4GHz Radio, is a complete setup developed for No Prep racing, and built upon the 9-time R.O.A.R. Short Course National Championship platform. This DR10 Drag Race Car features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as Team Associated's DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box and you've got an unbeatable street racer. NOTE: Battery shown in photos is for illustrative purposes only and is not included. See the needed to complete list below for a full list of items required to complete the model. Features: Based on the 9-time R.O.A.R. National Champion short-course race truck platform 2.4GHz 2-channel radio with DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro Three-position wheelie bar with optional large wheels High-torque, metal-gear Reedy servo with spring style servo saver Powerful Reedy 3300kV brushless motor Factory finished two-piece Reakt drag race body with rear spoiler Water-resistant high-powered Reedy brushless speed control with T-plug connector and Lipo low-voltage cutoff Aluminum 12mm big bore coil-over shock absorbers Rear CVA driveshafts for more reliability Water-resistant enclosed receiver box Rugged steel turnbuckles for adjustable camber and front toe-in Lightweight front drag tires Durable and lightweight aluminum top shaft Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3S LiPo battery packs Metric hardware throughout 18 precision, rubber-sealed ball bearings Durable front and rear wide body mounts 2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch Adjustable suspension geometry Vertical ball ends for roll center adjustments, front and rear Many Factory Team options already available Specifications: Scale: 1:10 Power: Electric Length: 609.6mm (24”) Width: 272mm (10.70”) Weight: 1850g (4.08 lbs) Wheelbase: 322mm (12.68”) Transmission Ratio: 2.6:1 Includes: (1) Team Associated DR10 RTR Brushless Drag Race Car (1) 2.4GHz 2-channel Radio Needed to Complete: (4) AA Alkaline batteries used in the transmitter (1) 2s-3s Lipo battery w/ high current t-plug (1) Battery charger This product was added to our catalog on May 28, 2021

Read more less

ASC70027, DR10 Drag Race Car Team Kit

Read more less

LOS03041, Losi 22S 1/10 No Prep Drag Car Roller The Losi 22S 1/10 No Prep Drag Car Roller makes it easy to build a custom no prep drag car - with the body and electronics you prefer. It's designed with racers in mind with officially licensed Mickey Thompson rear slicks and low drag, front tires. This pre-built roller offers the advantages of an aluminum chassis with plenty of 22S option parts. You get an all-metal gear transmission for long term durability with high power systems, and wire routes keeping your electronics and their wires in place and clean. The Elastomer battery mounting system is quick, easy and secure. Features at a Glance: Aluminum Chassis Officially licensed Mickey Thompson low drag front tires and rear drag racing slicks All Metal Gear Transmission Clean wire router installation Precision Adjustable Wheelie Bar Elastomer battery mounting for a versatile battery hold down system Full line of Aluminum Option Parts Available In Depth Features: Mickey Thompson ET Drag Tires: The Mickey Thompson licensed rear tires will surely give you a great grip on the road, making sure you have the ultimate traction for the high powered brushless system that is included. Mickey Thompson Ultra Light Front Runner Tires: Mickey Thompson licensed front tires will provide you with plenty of tracking while having lower drag characteristics. 3mm Aluminum Chassis: The Drag Car Roller comes standard with a 3mm Aluminum chassis to provide accurate and positive grip to the road when you are pushing the limits of power and traction. This chassis is designed with electronics protection, side impact guards, and a clean wire management system. Front Bumper with Adjustable Weight Placement: Fine tune the weight of the front end to keep it under control and on the ground. Precise Adjustable Wheelie Bar: The Drag Car Roller incorporates an adjustable wheelie bar that lets you dial in the exact position for your wheelie bar run after run. Elastomer Battery Straps and Adjustable Battery Position: Fine tune the position of your battery with the addition of elastomer battery straps and make your battery changes quick and easy. No more messing with clunky hook and loop. Simply slap your battery in, pull across the strap and hook it. Oil-filled Internal limited Coil-Over Spring Shocks: These shock absorbers help keep the car incredibly stable and so you can maintain total control on even the toughest drag strips. Internal limiters help eliminate body roll and keep the car planted to the track. Bleeder Shock Caps: Bleeder caps help you fine tune your shocks and get the perfect feel every time. Fully Adjustable Turnbuckles: For added adjustability and tune-ability, adjustable turnbuckles come standard. All Metal Gear Transmission: The Drag Car Roller comes with an all metal gear transmission for bullet-proof reliability to withstand anything you throw at it. Get your car down the lane without the fear of a broken transmission gear! Sealed Gear Differential: The sealed gear differential comes standard with 500,000k diff oil installed allowing you to throw as much power as you want. Precise Adjustable Wheelie Bar: The chassis incorporates an adjustable wheelie bar that lets you dial in the exact position for your wheelie bar run after run. Specifications: Approximate Assembly Time: 1 - 3 hours Ball Bearings: Full set Battery: Sold Separately Body: Not included Brakes: Integral with ESC Charger: Sold Separately Chassis: 3mm plate, 6061-T6 aluminum Completion Level: Kit Drivetrain: 2WD Drive Type: Forward/Brake/Reverse Front Track: 9.9" (252mm) Gear Pitch: 48P Internal Gear Ratio: 2.43:1 Motor Type: Sold Separately Product Height: 5" (127 mm) Product Length: 24.5" (622 mm) Product Width: 10.375" (264 mm) Radio: Sold Separately Rear Track: 10.0" (256.5mm) Receiver: Sold Separately Scale: 1/10 Servos: Sold Separately Shock Type: Oil-filled internal limited coil-over spring Speed Control: Sold Separately Spur Gear: 84T Suspension: Lower A-Arm, Upper Link Vehicle Type: Drag Car Wheelbase: 13.1" (333 mm) Includes: (1) 1/10 22S Drag Car Roller (1) Product Manual Needed to Complete: 2 Channel Transmitter and Receiver 2-3S LiPo Battery ESC based on what class you will be racing Brushless Motor based on what class you will be racing LiPo Compatible Charger Steering Servo Body Set Assorted tools (see manual for details) This product was added to our catalog on July 2, 2021

Read more less

ASC70029, DR10M Team Kit (ELECTRIC, DRAG CAR, 1:10 SCALE, 2 WHEEL DRIVE, KIT) Key Features • Mid-motor design creates improved traction and control in the vehicle's weight distribution • Durable front and rear wide body mounts • Rigid, 4mm thick carbon fiber rear shock tower • Heavy-duty sealed silicone-filled gear differential • Stiff rear anti-roll bar • Full adjustable double-ladder wheelie bar • Ball bearing wheelie bar wheels with rubber tires for increased straight-line stability • Height adjustable rear gearbox provides the ability to adjust drive shaft angle • All metal gear transmission with hardened steel top shaft • Octalock spur gear and 11mm Octalock pads for maximum consistency and higher torque capacity • 4-gear rear transmission configuration aids in controlling weight movement providing more traction under acceleration Additional Features • Rear CVA drive shafts for more reliability • V2 12mm Big Bore threaded aluminum shocks • Low center-of-gravity chassis with multiple battery and electronics mounting configurations • Rigid twin deck chassis design • Machined aluminum rear bulkheads • Machined aluminum rear suspension mounts • Rugged steel turnbuckles for adjustable camber and front toe-in • Adjustable suspension geometry • Vertical ball ends for roll center adjustments, front and rear • Many Factory Team options already available • 28 precision ball bearings • Metric hardware throughout This product was added to our catalog on April 2, 2022

Read more less