Exotek F1 Ultra Extra Light Front Wing. This replacement wing is intended for the Exotek F1 Ultra. Made from molded nylon, this lightweight wing uses a higher mounting base to reduce the chance of it dragging on the track. Package includes one front wing.NOTE: Only compatible with the short wheelbase if using the optional sway bar set.Specifications:Weight: 18g
Exotek F1 Ultra Extra Light Rear Wing. This replacement wing is intended for the Exotek F1 Ultra. Made from molded nylon, this lightweight wing helps reduce weight while providing high downforce. Package includes one front wing.
Specifications:
Weight: 21g
EXO2027, Exotek TLR 22S Drag Aluminum & Delrin Wheelie Wheels (Black) (2)
Exotek 22S Drag Aluminum and Delrin Wheelie Wheels are a CNC machined wheelie bar wheel option for the Losi 22S Drag car. The center wheel is machined from billet 6061 while the tires are machined from delrin. Special touches like silver cuts on the wheel and laser etched logos gives your car that factory racing look while adding a few grams of rear weight to the bar for more rear traction. Each wheel weighs 8 grams and uses the stock 22S wheelie wheel bearings. Package includes two wheelie bar wheels.
This product was added to our catalog on August 31, 2021
EXO2080, Exotek B6.3 Locked Spur Mount Set w/Titanium Bolt
The Exotek B6.3 Locked Spur Mount Set is an optional upgrade for the stock laydown/layback Associated B6.3-B6.2 top shaft. This super light locked spur mount features a titanium center bolt to create the lightest Exotek spur locker yet. Ideal for 17.5 stock buggy and high powered street eliminator drag racing. The design allows for easy switching between a locked spur or slipper as track conditions warrant. The mount and hardware weighs in at 5.1 grams total and is compatible with a wide range of available spur gear sizes by Exotek and Kimbrough.
Team Associated RC10B6.2
Team Associated RC10B6.2D
Team Associated RC10B6.3
Team Associated RC10B6.3D
Compatible Spur Gears:
Kimbrough
KIM301 66 tooth
KIM150 69 tooth
KIM143 72 tooth
KIM161 73 tooth
KIM162 74 tooth
Exotek
EXO1543 66 tooth
EXO1544 69 tooth
EXO1590 72 tooth
EXO1545 75 tooth
EXO1546 78 tooth
This product was added to our catalog on November 7, 2023
Winner of the 2020 Roar Carpet Nationals and 2019 Protoform Cup!
The Exotek F1 Ultra 1/10 Pro Race Formula Chassis Kit is a revolutionary kit designed to dominate Formula class racing. The F1 ULTRA is not just a redesigned 1/12 chassis - the F1 ULTRA was developed from the ground up to be an F1 chassis. This has been a passion project of Exotek for many years. This is also their very first full kit release! After years of adding innovation to other F1 kits, Exotek decided it was time to release their own kit incorporating cutting edge patented chassis technology with high quality components and features you’ve grown to expect from Exotek. You will appreciate the details designed in to maximize rubber tire grip as well as add extra durability that these very unique cars require.
NOTE: Rolling chassis shown in photos is for illustrative purposes only and shows items that are not included. See needed to complete list below for a full list of items required to complete the model.
Features:
Patent pending floating rear pod suspension system provides unmatched rear traction needed for rubber tire F1 racing. Because the rear suspension generates so much rear traction you are able to use more aggressive front tires which translates to greatly improved lap times and full race length consistency.
Extra narrow chassis (only 72mm wide) for improved ground clearance and faster corner speeds
Ultra smooth sealed micro shocks for maintenance free rear pod tuning and only 3.8gr each including the oil!
Micro shocks includes 3 tuning spring sets for low, medium and high grip tracks
Innovative double spring top 'clutch' shock uses an additional internal spring to provide increased forward bite
Chassis mounted, lightweight rear wing mount. Simple and elegant design that increases the overall rear grip
Extra long, heavy duty no flex side links. The longest links of any F1 car provides less rear pod angling (less rear bump steer) as the rear tires travel up and down for improved high speed consistency
One piece, heavy duty, machined alloy rear pod. Provides tweak free racing, extra traction and improved motor cooling
Heavy duty oversized 1/4" rear axle bearings. Much much stronger than typical smaller standard 1/4" pan car bearings.
One piece heavy duty machined alloy front bulkhead provides rock solid front suspension mounting
Two piece hybrid chassis is optimized to work on all track conditions including low grip asphalt and high grip black carpet.
Long and short wheelbase adjustment for large and small tracks.
Machined alloy precision steering rack and post included
Easy adjust front camber and caster turnbuckle system means no clumsy 'camber inserts' to deal with for quick and precise adjustments without even the need to remove the body
6 sided turnbuckles for easier turnbuckle wrench access (uses 4mm wrenches)
Extra heavy duty 3mm thick front arms for tweak free racing
Super smooth and lightweight pro ball diff included that uses 1/12th style spur gears and diff parts
Secure shorty lipo tray with carbon lipo tab for easy lipo access
Open rear pod design makes for easier tweak free motor wire routing
High quality premium metric YFS screws used throughout
Heavy duty, high visibility, multi element front wing included
Lightweight, high visibility, high downforce, adjustable rear wing included
Can be used with aftermarket F1 gear diffs or spools (1/4" axles etc) and 1/12 spur gears
Compatible with these modern 1/10 F1 race bodies such as Protoform F26, MonTech F18 / F17, Bitty Type6, JConcepts J21 etc and others
Needed to Complete:
1:10 Scale Electric Motor
Electronic Speed Control
Steering Servo
3.7V/7.4V LiPo or 6.0V LiFe “Shorty” Battery & Charger
2 Channel Surface Radio System
1:10 Scale F1 Wheels and Tires (Rubber or Foam)
1:10 Scale Polycarbonate F1 Body
Polycarbonate Specific Spray Paint for Body
Servo Tape
Tools for Assembly & Setup
EXO1985, Exotek Traxxas Slash/Bandit "Vader" Drag Race Chassis Conversion
TX Vader Drag Chassis Conversion, for the 2wd Slash / Bandit
TX VADER drag chassis conversion set.
Lightweight 'street eliminator' drag chassis conversion set for use with TRAXXAS 2WD SLASH OR BANDITS KITS.
Converts your Slash to be cash race ready for the hot 'Street Eliminator No Prep' race classes springing up around the US.
Provides the legal 13" wheelbase to fit under the hottest new no prep bodies that are on the market.
Based on the excellent handling and proven 22 VADER design.
This pro chassis conversion set features
- Carbon fiber made and machined in USA
- Heavy duty 2.5mm thick chassis and side rail plates
- Centralized servo mounting for improved balance
- Alloy servo mounting block that ties into the side rails for extra rigid and tweak free front chassis setup
- Modular chassis design- allows standard rear motor or optional mid motor gear box placement (see instructions for build notes)
- 6 heavy duty alloy side rail posts
- Pro AE B6 style full ball bearing supported steering rack and crank set
- Includes 25 spline clamping alloy servo horn (25 spline servo required like the Traxxas servo etc.)
- Alloy parts are finished in glossy black with blue chamfers for that factory racing look
- Carbon fiber top bulkhead plate
- Multi position shorty lipo mounting to adjust for wheelie/ no wheelie balance
- 2 level chassis design allows you to lower or raise the center of gravity for stability yet keeps the gear box higher to increase traction and keep the drive axles straighter for higher speeds
- The 2 layer rear chassis also raises the rear roll center which increases the forward launch traction while reducing side to side roll for improved high speed stability.
- Offers multiple weight balance options to maximize grip on the street or on the track
- Includes steel hex hardware (requires high quality metric hex tools, 2.0 & 2.5mm)
- Includes a lipo hold set
- Includes large Exotek logo stickers
- Includes instruction sheet
Other option parts shown not included.
Wheelie bar shown is not included.
Requires assembly. Shown assembled for display purposes only
Also required:
Traxxas 2wd SLASH or BANDIT kit
Traxxas body mount set TRA1914R
Traxxas toe link set TRA3745 or TRA3139A (2 sets needed)
This product was added to our catalog on December 16, 2021
EXO2131, Exotek Slash 4X4 HD Steel Front CVD Set
Exotek Slash 4X4 HD Steel Front CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.NOTE: Requires blue thread lock and cvd oil or grease (not included).Includes:
(2) 72mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on January 19, 2022
EXO2132, Exotek Slash 4X4/2WD HD Steel Rear CVD Set
Exotek Slash 4X4/2WD HD Steel Rear CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Slash 2WD, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.
NOTE: Requires blue thread lock and cvd oil or grease (not included).
Includes:
(2) 76mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on May 19, 2021
