Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

2S LiPo

237 products


  • TRA2843X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/5800mAh) TRA2843X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/5800mAh)

    Traxxas TRA2843X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/5800mAh)

    12 in stock

    TRA2843X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/5800mAh) This is the Traxxas 2S, 7.4V, 5800mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. High-Current Connector Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards. With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task. The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance. NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection. Features: Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time. Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run. Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times. Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs. Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery. Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models. Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked! Specifications: Type: LiPo Total Capacity: 5800 Voltage: 7.4 Continuous Discharge: 25C (145A) Max Burst Rate: 50C (290A) Watt Hours: 42.92 Charge Rate: 1C (5.8A) Max Charge Rate: 2C (11.6A) Dimensions: 137x25x43mm Weight: 10.9oz (308g) CHARGING NOTE: This battery can only be safely charged with a Traxxas iD Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Traxxas iD Battery Charger. This product was added to our catalog on May 7, 2021

    12 in stock

    $59.99

  • TRA2869X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/7600mAh) TRA2869X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/7600mAh)

    Traxxas TRA2869X, Traxxas 2S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (7.4V/7600mAh)

    14 in stock

    TRA2869X, This is the Traxxas 2S, 7.4V, 7600mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge! All Traxxas iD Power Cell Battery Packs are optimized for free-flowing power and maximum punch with premium quality, low-resistance cells; flexible, silicone-jacketed 12-gauge wire; heavy-duty welded tabs; and patented Traxxas' high-output, gold plated, High-Current Connectors. High-Current Connector Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards. Charging with a Traxxas iD Charger The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus (TRA2970) recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and EZ-Peak Plus does all the work for you. Features: Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time. Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run. Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times. Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs. Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery. Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models. Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked! Specifications: Type: LiPo Total Capacity: 7600 Voltage: 7.4 Continuous Discharge: 25C (190A) Max Burst Rate: 50C (380A) Watt Hours: 56.24 Charge Rate: 1C (7.6A) Max Charge Rate: 2C (15.2A) Dimensions: 155x27x43mm Weight: 13.8oz (390g) This product was added to our catalog on September 7, 2021

    14 in stock

    $79.99

  • DYNB0012, Dynamite 2S LiPo Battery (7.4V/350mAh) DYNB0012, Dynamite 2S LiPo Battery (7.4V/350mAh)

    Dynamite DYNB0012, Dynamite 2S LiPo Battery (7.4V/350mAh)

    19 in stock

    DYNB0012, Dynamite 2S LiPo Battery (7.4V/350mAh) The Dynamite 7.4v 350mAh 2S LiPo Battery is intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one 2S LiPo to replace the kit supplied battery. This product was added to our catalog on June 5, 2021

    19 in stock

    $19.99

  • PTK-5129-19, ProTek RC 2S 100C Si-Graphene + HV LiPo Stick Pack TCS Battery (7.6V/5000mAh) PTK-5129-19, ProTek RC 2S 100C Si-Graphene + HV LiPo Stick Pack TCS Battery (7.6V/5000mAh)

    ProTek RC PTK-5129-19, ProTek RC 2S 100C Si-Graphene + HV LiPo Stick Pack TCS Battery (7.6V/5000mAh)

    10 in stock

    PTK-5129-19, ProTek RC 2S 100C Si-Graphene + HV LiPo Stick Pack TCS Battery (7.6V/5000mAh) The ProTek R/C 2S 100C Si-Graphene + HV LiPo Stick Pack Battery is built using a hard plastic case that is the same dimensions as a standard NiMH stick pack. This makes them a great choice for Tamiya TCS Series racing, including Euro Truck, all GT classes, M-Chassis and Formula One - as well as Euro Truck Racing League. Plus, its a great choice for any chassis that will accept a 6 cell NiMH stick pack. Weighing in at 235 grams, this Si-Graphene + HV battery weighs less than a standard 5000mAh LiPo battery of the same configuration - making your car lighter and faster! When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, increased run time, increased cycle life and increased voltage - but Graphene + 100C LiPo batteries take that a step further with more power and lower internal resistance when compared to the previous ProTek LiHV Graphene packs! This provides more runtime, and a dramatic increase in voltage and punch over the course of a run.   Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries, Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 100C discharge ratings, incredibly high charge rates and huge variety of models to choose from, ProTek R/C 100C Graphene + packs are perfect for racers and bashers that demand the absolute best.   Features:  Perfect for Tamiya TCS Series racing Hard case is the same dimensions as a standard NiMH stick pack Lighter than a hardcase 2S LiPo pack of equal capacity  Improved power to weight ratio and a lower overall CG More runtime, with a dramatic increase in voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Increased run time, increased cycle life and increased voltage! More capacity gram for gram when compared to standard LiPo cells  Perfect for stock class racers looking to shave grams 10C max charge rates - 1C charge rate recommended for longest life 7.6V nominal voltage Factory installed T-style plug NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack. Battery Model 2S HV LiPo ROAR Approved Yes  Type Silicon Graphene   Voltage 7.6V nominal  Capacity @7.4V  5000mAh  Capacity @7.6V  5400mAh  Weight  235 g  Connector Type  T-style Balance Connector  3 Pin XH Number of Cells 2 Cell  Configuration 2S1P  Dimensions (WxLxH) 46.7x137.5x24.2mm  Maximum Charge Rate 10C (50A)  Burst Current  100C  Watt Hour @7.6V  38Wh  Includes: (1) ProTek R/C Battery LITHIUM POLYMER SAFETY INFORMATION  IMPORTANT:  DO NOT leave the battery in your model when charging DO NOT leave unattended when charging  ALWAYS balance charge the battery  ALWAYS use a LiPo charging bag  YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)  YOU MUST not over discharge the Li-Poly battery pack READ & UNDERSTAND the instructions carefully before operating this battery  NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on April 16, 2021

    10 in stock

    $76.99

  • TRA2991, Traxxas EZ-Peak 2S "Completer Pack" Dual Multi-Chemistry Battery Charger w/Two Power Cell 2S Batteries (7600mAh) TRA2991, Traxxas EZ-Peak 2S "Completer Pack" Dual Multi-Chemistry Battery Charger w/Two Power Cell 2S Batteries (7600mAh)

    Traxxas TRA2991, Traxxas EZ-Peak 2S "Completer Pack" Dual Multi-Chemistry Battery Charger w/Two Power Cell 2S Batteries (7600mAh)

    10 in stock

    TRA2991, Traxxas EZ-Peak 2S "Completer Pack" Dual Multi-Chemistry Battery Charger w/Two Power Cell 2S Batteries (7600mAh) This is the Traxxas EZ-Peak Dual Multi-Chemistry Battery Charger System with two included "Power Cell" Batteries. This charging system uses the Traxxas iD Battery Identification System and is a great solution when you need batteries and a charger for your Traxxas vehicle that runs either one or two 2S LiPo batteries. Even if your Traxxas vehicle requires only one battery, you can still take advantage of this system and have two batteries on hand for extended driving excitement. iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. Traxxas' Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power. TRA2972 Charger Specifications: AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575g Dimensions: 176x138x57mm TRA2869X Battery Specifications: Type: LiPo Total Capacity: 7600 Voltage: 7.4 Continuous Discharge: 25C (190A) Max Burst Rate: 50C (380A) Watt Hours: 56.24 Charge Rate: 1C (7.6A) Max Charge Rate: 2C (15.2A) Dimensions: 155x27x43mm Weight: 13.8oz (390g) Includes: (1) TRA2972: Dual iD Battery Charger (2) TRA2869X: 7600mAh 2S 25C LiPo Battery w/iD COMPATIBILITY Traxxas E-Revo Traxxas E-Revo VXL 2.0 Traxxas Slash 2wd Traxxas Slash 4x4 Traxxas Slash 4x4 Ultimate Traxxas Spartan Traxxas Summit 1/10 Traxxas TRX-4 Traxxas TRX-4 Traxxas Unlimited Desert Racer Traxxas X-Maxx This product was added to our catalog on September 7, 2021

    10 in stock

    $249.99

  • TRA2842X, Traxxas 2S "Power Cell" 25C Lipo Battery w/iD Traxxas Connector (7.4V/5000mAh) TRA2842X, Traxxas 2S "Power Cell" 25C Lipo Battery w/iD Traxxas Connector (7.4V/5000mAh)

    Traxxas TRA2842X, Traxxas 2S "Power Cell" 25C Lipo Battery w/iD Traxxas Connector (7.4V/5000mAh)

    7 in stock

    TRA2842X, Traxxas 2S "Power Cell" 25C Lipo Battery w/iD Traxxas Connector (7.4V/5000mAh) This is a Traxxas 2S "Power Cell" 25C Lipo Battery with iD Traxxas Connector, a certified iD-Equipped LiPo battery that is engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Traxxas delivers you more of what you want most: simple installation, a great price, and extended speed and run time. Specifications: Type: LiPo Total Capacity: 5000mAh Voltage: 7.4 V C Rating: 25 Length: 137mm Height: 24mm Width: 43mm Weight: 9.9oz This product was added to our catalog on April 12, 2021

    7 in stock

    $49.99

  • TRA2821, Traxxas 750Mah 7.4V 2-Cell 20C Lipo Battery

    Traxxas TRA2821, Traxxas 750Mah 7.4V 2-Cell 20C Lipo Battery

    7 in stock

    TRA2821, 750mAh 7.4V 2-Cell 20C LiPo Battery Traxxas 750Mah 7.4V 2-Cell 20C Lipo Battery This product was added to our catalog on October 3, 2022  

    7 in stock

    $19.99

  • GEA53002S60D21, Gens Ace 2s LiPo Battery 60C w/T-Style Connector (7.4V/5300mAh) GEA53002S60D21, Gens Ace 2s LiPo Battery 60C w/T-Style Connector (7.4V/5300mAh)

    Gens Ace GEA53002S60D21, Gens Ace 2s LiPo Battery 60C w/T-Style Connector (7.4V/5300mAh)

    5 in stock

    Gens Ace 2s LiPo Battery 60C w/T-Style Connector (7.4V/5300mAh) Gens Ace batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All Gens Ace batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery. Features:  Stable automatic stacking technology enables single cell capacities of 5000mAh. The most strict single cell capacity, voltage, resistance, discharge curve matching process. Superior Japan and Korea Lithium Polymer raw materials. Specifications: Capacity: 5300mAh Voltage: 7.4V / 2S2P / 2 Cell Discharge Rate: 60C Max Burst Discharge Rate: 100C Weight: 289g Size: 138.5x47x25.5mm (LxWxH) Connector Type: Deans This product was added to our catalog on March 18, 2021

    5 in stock

    $45.99

  • PTK-5141-22, ProTek RC 2S 50C 1100mAh Losi Mini T/B & JRX2 LiPo Battery w/EC2 Connector PTK-5141-22, ProTek RC 2S 50C 1100mAh Losi Mini T/B & JRX2 LiPo Battery w/EC2 Connector

    ProTek RC PTK-5141-22, ProTek RC 2S 50C 1100mAh Losi Mini T/B & JRX2 LiPo Battery w/EC2 Connector

    7 in stock

    PTK-5141-22, ProTek RC 2S 50C 1100mAh Losi Mini T/B & JRX2 LiPo Battery w/EC2 Connector The Protek R/C 2S 50C 1100mAh Losi Mini T/B and JRX2 LiPo Battery is built with performance in mind. Using Silicon Graphene technology this battery packs a punch with it's 50c discharge rating! Designed to work with the Losi Mini T, B and Mini JRX2 this pack offers extended runtimes with it's larger 1100mah capacity. Equipped with an EC2 style connector makes this a plug in option with no need to mess with adapters or to get out the soldering iron. With more time on the track and the ability to dish out the power this Protek battery pack is an excellent upgrade for your Mini T, B or JRX2 vehicles. Features: Direct fit for Losi Mini B, T and JRX2 vehicles More runtime, with a dramatic increase in punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Factory installed EC2 plug  Battery Model 2s 50C 1100mAh Application Air, Ground Type Silicon Graphene  Voltage 7.4V nominal Capacity @7.4V 1100mAh Weight 68g Connector Type EC2 Balance Connector XH Connector          Number of Cells 2 Cell Configuration 2S1P Dimensions (LxWxH) 58x32x20mm Maximum Charge Rate 4C (4.4A) Watt Hour @7.4V 8.14Wh Includes: (1) ProTek R/C Battery LITHIUM POLYMER SAFETY INFORMATION IMPORTANT: DO NOT leave the battery in your model when charging DO NOT leave unattended when charging ALWAYS balance charge the battery ALWAYS use a LiPo charging bag YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!) YOU MUST not over discharge the Li-Poly battery pack READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on September 1, 2022

    7 in stock

    $29.99

  • PHB2S6000120CBULLET, 2S 7.6V 6000mah 120C Graphene + HV Lipo Battery Bullet Deans Plug 120C Continuous / 240C Burst

    PowerHobby PHB2S6000120CBULLET, 2S 7.6V 6000mah 120C Graphene + HV Lipo Battery Bullet Deans Plug 120C Continuous / 240C Burst

    10 in stock

    PHB2S6000120CBULLET, 2S 7.6V 6000mah 120C Graphene + HV Lipo Battery Bullet Deans Plug 120C Continuous / 240C Burst Perfect for 1/10 & 1/8 scale vehicles, Boats, Planes, Drones. When you want a powerful battery pack that you can depend on even when you push it to its limits, this 2S 6000mah 120C LiPo Battery is for you. Powerhobby Power Pro Series lipo batteries offers very high power and very long run time for your RC models. The 240C burst rate enhances your driving experience no matter what type of driving you are into.These batteries packs are made with superior Lithium Polymer raw materials. The advanced stacking technology enables a single cell of capacity to reach 6000mah. Powerhobby Power Pro Batteries are your ideal choice for your RC Applications. Application(s): 1/10 / 1/8 scale cars, trucks, and buggies, dronesIncludes : 1 Battery Specifications: Discharge Connector: Deans Balance Connector: JST-XH Lenth : 134.5mm Width : 47mm Height: 25mm Weight: 10 Ounces  This product was added to our catalog on July 30, 2021

    10 in stock

    $64.99

  • DYNB65021H2, Dynamite Reaction 2S 20C Hard Case LiPo Battery w/EC2 Connector (7.4V/650mAh)

    Dynamite DYNB65021H2, Dynamite Reaction 2S 20C Hard Case LiPo Battery w/EC2 Connector (7.4V/650mAh)

    Out of stock

    DYNB65021H2, Dynamite Reaction 2S 20C Hard Case LiPo Battery w/EC2 Connector (7.4V/650mAh) This is a Dynamite RC 7.4V 650mAh Reaction 2S 20C Hard Case LiPo Battery with EC2 Connector. The EC2 equipped DYNB65021H2 LiPo battery is a direct replacement for the battery included with the Losi Mini T 2.0 (LOS01015T1, LOS01015T2, LOS01015T3). Features: Value-priced without sacrificing quality or performance Pre-wired with an EC2 connector and JST-XH balance connector Hard case design Designed to fit Losi Mini-T 2.0 vehicles  Specifications: Height: 0.8" (20 mm) Length: 2.3" (58 mm) Width: 1.2" (30 mm) Weight: 1.7 oz (48g) This product was added to our catalog on March 18, 2021

    Out of stock

    $25.99

  • DYNB5025HD, Reaction2 7.4V 5000mAh 2S 50C LiPo, Hardcase:Deans

    Dynamite DYNB5025HD, Reaction2 7.4V 5000mAh 2S 50C LiPo, Hardcase:Deans

    Out of stock

    DYNB5025HD, Reaction2 7.4V 5000mAh 2S 50C LiPo, Hardcase:Deans

    Out of stock

    $81.99

  • PHB2S4200120CSHORTY, 2S 7.6V HV + Graphene 4200mah 120c Shorty Lipo Battery

    PowerHobby PHB2S4200120CSHORTY, 2S 7.6V HV + Graphene 4200mah 120c Shorty Lipo Battery

    2 in stock

    PHB2S4200120CSHORTY, 2S 7.6V HV + Graphene 4200mah 120c Shorty Lipo BatteryThis hard case car pack was designed with racers in mind.Application(s): 1/10 / 1/8 scale cars, trucks, buggies, Truggies Features: Hard Plastic Case 4mm female bullet connectors for positive (+) and negative (-) terminals 2mm terminal for balancing "Shorty" configuration allows racers to alter the weight distribution by shifting battery position in tray Suggested Charge Rate : 2C Specifications: Discharge Connector: DEANS Balance Connector: JST-XH Length : 96 mm Width : 47mm Height : 18.5 mm Weight : 5.6 Ounces

    2 in stock

    $50.99

  • PTK-5117-22, ProTek RC 2S 130C Low IR Si-Graphene + HV LCG Shorty LiPo Battery (7.6V/4800mAh) w/5mm Connectors (ROAR Approved) PTK-5117-22, ProTek RC 2S 130C Low IR Si-Graphene + HV LCG Shorty LiPo Battery (7.6V/4800mAh) w/5mm Connectors (ROAR Approved)

    ProTek RC PTK-5117-22, ProTek RC 2S 130C Low IR Si-Graphene + HV LCG Shorty LiPo Battery (7.6V/4800mAh) w/5mm Connectors (ROAR Approved)

    9 in stock

    PTK-5117-22, ProTek RC 2S 130C Low IR Si-Graphene + HV LCG Shorty LiPo Battery (7.6V/4800mAh) w/5mm Connectors (ROAR Approved) The ProTek R/C 2S 130C Graphene + HV 4200mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. Weighing only 170 grams, the HV Shorty is lighter than a standard shorty pack, with a massive increase in capacity. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage. This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. This pack is also a great choice for 1/8 e-buggies that want to run a lightweight 2x2S saddle pack configuration. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best. Features: Lighter than a hardcase 2S LiPo pack of equal capacity More runtime, with a dramatic increase in voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Increased run time, increased cycle life and increased voltage! More capacity gram for gram when compared to standard LiPo cells Perfect for stock class racers looking to shave grams 10C max charge rates - 1C charge rate recommended for longest life 7.6V nominal voltage 5mm bullets and 5mm to 4mm bullet adapters included NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack. Battery Model 2S HV LiPo ROAR Approved Yes Type Silicon Graphene Voltage 7.6V Capacity @7.4V 4200mAh Capacity @7.6V 4800mAh Weight 170g Connector Type 5mm Bullet Balance Connector 2mm Bullet Number of Cells 2 Cell Configuration 2S1P Dimensions (WxLxH) 47x96x20mm Maximum Charge Rate 10C (48A) Burst Current 130C Watt Hour @7.6V 36.5 Wh Includes: (1) ProTek R/C Battery (2) 5mm to 4mm Bullet Reducers (2) 5mm Bullet Connectors (1) 2mm Balance Bullet Connector This product was added to our catalog on May 21, 2023

    9 in stock

    $59.99

  • DYNB5025H5, Reaction2 7.4V 5000mAh 2S 50C LiPo, Hardcase: EC5

    Dynamite DYNB5025H5, Reaction2 7.4V 5000mAh 2S 50C LiPo, Hardcase: EC5

    Out of stock

    DYNB5025H5, Reaction2 7.4V 5000mAh 2S 50C LiPo, Hardcase: EC5