Drift Cars
Yokomo YOKZR-DRPA, Yokomo DRPA Competition Drift Tire (4) (for P-Tile)
YOKZR-DRPA, Yokomo DRPA Competition Drift Tire (4) (for P-Tile) This is a pack of four Yokomo DRPA Competition Drift Tires for use on P-tile surfaces. This is a solid type competition resin drift tire ideal for P-tile and has been long term tested to ensure consistent traction and sliding characteristics. Previously tires have tended to require a long period of break-in to achieve their optimal grip, but the DRPA provides constant grip right out of the box and maintains stable performance over the long run. Although it is possible to mount this tire on a general tenth size drift wheel as it is, in case the size is loose, use a tire attachment tape (YOKZR-DRT) between the tire and the wheel. This product was added to our catalog on January 10, 2023
$17.99
HobbyWing Hobbywing Xerun XD10 Pro Drift Spec Brushless Speed Controller
Hobbywing Xerun XD10 Pro Drift Spec Brushless Speed Controller Features: Built-in switch mode BEC with a maximum output of 10A and voltage adjustable from 5V to 7.4V (step: 0.1V) for usage with servos & other devices require different voltages. A separate PRG/FAN port is able to power an external fan to maximize cooling performance or connect an LCD program box or WiFi module to the ESC. Variable frequency regulation of PWM & brake frequencies allows users to precisely regulate the driving & braking forces (of the motors). Multiple protections: low-voltage cutoff protection, ESC and motor thermal protection, and fail-safe (throttle signal loss protection), reverse polarity protection (the external standard cap pack will still be damaged if battery reversal occurs). Data logging for recording the maximum ESC/motor temperature, motor speed/RPM, and others in real-time. Firmware upgrade via Hobbywing multifunction LCD program box (PC only) or OTA Programmer (item sold separately) Specifications: Application: 1/10th drift car Cont./Peak Current: 100A/800A Input Voltage: 2S LiPo/4-6S NiMH BEC Output: 5-7.4V Adjustable, Continuous Current of 5A (Switch-mode) Wires & Connectors: 13AWG 200mm Programming device: LCD program box, OTA programmer (Available through Firmware update) Firmware: LCD Program box via USB software (PC only), OTA (iOS / Android) Size & Weight: 40.7x35.0x32.0mm (w/Fan) Weight: 95g (w/ wires) Motor Limit: 2S LiPo/6S NiMH ?8.5T Includes: (1) XD10 PRO ESC (2) Input wires & (3) Output wires (PRE-SOLDERED) (1) cooling fan Decals Bonus parts: heat tubes, double tape, nylon cable zap traps This product was added to our catalog on May 3, 2023
$220.99
HobbyWing HWA30404307, Hobbywing Quicrun 3650 G2 Sensored Brushless Motor (21.5T)
HWA30404307, Hobbywing Quicrun 3650 G2 Sensored Brushless Motor (21.5T) The Hobbywing Quicrun 3650 G2 Sensored Brushless Motor is a high efficiency option, creating good power, and keeping temps low. Ideal for 1/10th, 1/12th On-road (Race or drift Touring cars, F1, M vehicles and etc.) & Off-road (Buggies/2WD SCTs & Trucks) STOCK/SPORT Class Competitions (About Motors' T counts, please refer to rules regulated by race organizers), Beginners for practice, and Rock Crawlers (applicable to 21.5T,25.5T motors) applications. Features: Built-in Hall sensor brings drivers an amazing sense of control. Top-quality components: heat-resistant magnet, heat-resistant wires and name-brand bearings. Dustproof design where motor leads exit. Features a gold-plated lockable connector which can be fastened by screws, eliminating the possibility of losing connections. Detachable structure is easy to clean and maintain, greatly prolonging the service life of the motor. Specifications: Turn: 21.5T Kv: 1800Kv LiPo: 2-3S Shaft Diameter: 3.175mm Resistance: 0.0747 ohm No Load Current: 1.3A Max Output Power: 95W Max Output Current: 28A Weight: 186g This product was added to our catalog on May 3, 2023
$54.99
MST MXS-820132, MST TCR 11mm Coil Spring Set (12)
MST TCR 11mm Coil Spring Set. This optional spring set is intended for the MST TCR chassis. Using this set will allow you to fine tune the suspension to best suite your track and driving style. Package includes twelve springs.
$24.99
Traxxas TRA10590, Traxxas 4-Tec 2.0 Underbody LED Light Kit
TRA10590, Traxxas 4-Tec 2.0 Underbody LED Light Kit Give your 4-Tec® 2.0 extra style points with this underbody LED light kit. Perfect for track competitions or parking lot hooning, the underbody LED light kit casts a colorful glow underneath the car. The light kit is compatible with 4-Tec Drift and most 200 mm bodies fitting the 4-Tec 2.0 chassis. The LED light strips are sealed inside a tough housing that mounts securely to the sides of the chassis with the provided hardware. The included 3-volt power supply connects directly to the battery using the included power tap for smooth, consistent light output from beginning to end. Take your driving experience to the next level with the 4-Tec underbody LED light kit. This product was added to our catalog on December 7, 2024
$34.95
MST MXS-130040, MST Ball Differential Grease
MST Ball Differential Grease. This is the diff grease used with the RMX 2.0 S ball diff.
$2.99
MST MXS-210491, MST 5.8x4mm Ball Connector L (4)
The MST 5.8x4mm Ball Connector L is a replacement for RRX-D, RMX-D, FMX-D, FSX-D, FXX-D and XXX-D models. Package includes four L type ball connectors.
$7.99
MST MXS-810008BK, MST 3x25mm Aluminum Reinforced Turnbuckle (Black) (2)
The MST 3x25mm Aluminum Reinforced Turnbuckle is a machined aluminum option that will reduce weight and add a custom touch to any model that uses a 3x25mm turnbuckle. The turnbuckles are marked with a notch to indicate direction, use a 4mm wrench for adjustment, and are available in a variety of colors to allow for a personalized look.
$7.99
MST MXS-230066, MST RMX 2.0 S ATK Front Wheel Hubs
MST RMX 2.0 S ATK Front Wheel Hubs. These are the stock ATK type front steering knuckles. Package includes left and right side hubs.
$9.99
MST MXS-230070BK, MST RMX 2.0/2.0 S Shaft Bushing & Spacer Set
MXS-230070BK, MST RMX 2.0/2.0 S Shaft Bushing & Spacer Set MST RMX 2.0 S Shaft Bushing and Spacer Set. These optional shaft bushings replaced the factory MXS-23070 bushings. Package includes four bushings and four spacers intended for the MST RMX 2.0. This product was added to our catalog on September 3, 2021
$7.99
MST MXS-310101R, MST RMX 2.0 S Aluminum Motor Mount (Red)
MST RMX 2.0 S Aluminum Motor Mount. This is the replacement motor mount plate.
$9.99
MST MXS-810011S, MST 3x40mm Aluminum Reinforced Turnbuckle (Silver) (2)
The MST 3x40mm Aluminum Reinforced Turnbuckle is a machined aluminum option that will reduce weight and add a custom touch to any model that uses a 3x40mm turnbuckle. The turnbuckles are marked with a notch to indicate direction, use a 4mm wrench for adjustment, and are available in a variety of colors to allow for a personalized look.
$8.99
MST MXS-110059, MST 1.5x7.8mm Shafts (8)
MST 1.5x7.8mm Shafts. These replacement shafts are intended for the MST RMX 2.0 S or the FFX-D. Package includes eight shafts.
$3.99
MST MXS-810011BK, MST 3x40mm Aluminum Reinforced Turnbuckle (Black) (2)
The MST 3x40mm Aluminum Reinforced Turnbuckle is a machined aluminum option that will reduce weight and add a custom touch to any model that uses a 3x40mm turnbuckle. The turnbuckles are marked with a notch to indicate direction, use a 4mm wrench for adjustment, and are available in a variety of colors to allow for a personalized look.
$8.99
MST MXS-230068, MST RMX 2.0 S 48P Spur Gear (80T)
MXS-230068, MST RMX 2.0 S 48P Spur Gear (80T)
$6.99
MST MXS-210520, MST RMX Rear Shaft Ball Differential Set (40-13)
The MST RMX Rear Shaft Ball Differential Set is an upgrade for the RMX 2.0 S, as well as the RMX-D kits equipped with the optional 4WD conversion (MXS-210452). Package includes precision machined outdrives, and the rest of the parts to build one complete ball diff with 40/13T gearing.
$40.99
MST MXS-210644, MST RMX 2.0 Aluminum Ball Differential Set
MST RMX 2.0 Aluminum Ball Differential Set
$49.99
MST MXS-120002, MST 5x10mm Ball bearings (4)
MST 5x10mm Ball bearings. These replacement bearings are intended for the MST RMX 2.0S or the FXX-D. Package includes four bearings.
$8.99
MST MXS-810033, MST 3x40mm Steel Reinforced Turnbuckle (2)
The MST 3x40mm Steel Reinforced Turnbuckle is a heavy duty steel option that will add strength to any model that uses a 3x40mm turnbuckle. The turnbuckles are marked with a notch to indicate direction and use a 4mm wrench for adjustment.
$5.99
HobbyWing ELCNITRIDE110, Elceram Nitride 1/10 Brushless ESC w/LCD Display
ELCNITRIDE110, Elceram Nitride 1/10 Brushless ESC w/LCD Display Features: A color display with Thin-Film-Transistor (TFT) LCD (Liquid-Crystal Display) technology, with a resolution of 160x80 pixels. Self-diagnostic before the race: motor temperature, sensor cable, battery Post-race data evaluation Race data logging Fully programmable all through the ESC without the need for a program card or wireless module Realtime Data monitoring of the battery voltage, ESC, and motor temperatures Advanced Aluminum Nitride Ceramic Cooling Technology Extremely low internal resistance based on silver conductive layer 70% weight bias at the bottom of the esc 32-Bit MCU 13AWG Wires This product was added to our catalog on November 12, 2023
$269.99
HobbyWing HWA30401139, HobbyWing Xerun D10 Drift Brushless Motor (13.5T) (Purple)
HWA30401139, HobbyWing Xerun D10 Drift Brushless Motor (13.5T) (Purple) Features: Designed for Drift: The Xerun D10 motors provide the ideal colors to perfectly match your drift machines. Available in Black, Red, and Purple. Banana Plug Quick-Swap Design: The motor comes factory soldered with high quality 3.5mm banana plug for easy access swap to different motors. 3.5mm male head is also included in the XD10 ESC. Stator Designed for Drift: The motor stator is optimized for drift and improves motor efficiency in drift applications. Built-in with high-precision sensors board, combined with drift-specific fan rotors, providing excellent motor linearity and drivability while greatly improves motor efficiency. Lightweight: The 10.5T motor weighs approximately 158g while the 13.5T is at 165g (including 3 gold insert weights). The lightweight motor allows user to easily tweak their weight bias on their car. Fan Rotor: Providing great heat dissipation, power the special-shaped gold fan on the rotor heats the motor while making a pleasant sound, especially when Turbo is turned on. Best paired with XD10 PRO ESC Specifications: Application: 1/10th Drift car Input Voltage: 2S Lipo KV: 2900kv Rotor: 2 POLE ?5-12.1*24.1-BES*-L3 Weight: 157 / 165 Can Size: 35.7xx52.6mm (1.41x2.07") Shaft Diameter: 3.175mm (0.125") Shaft Length: 15.0mm (0.591") NOTE: To avoid short circuits, ensure that all wires and joints must be well insulated before connecting the motor to related devices. The M3 screws with a length (no longer than 7mm) are needed when mounting the motor onto your vehicle. Please pay attention to the relevant marks (on the ESC) when soldering/connecting those output wires to the motor and make sure that you will strictly follow the wiring order (between the ESC & themotor) of “A-A, B-B, and C-C”. Please ensure the sensor cable is clean and undamaged when you’re using a sensor ESC. You need to pay attention to the two connectors on the cable when connecting the ESC to the motor. Re-check all the connections between the ESC & the motor and ensure that they are all correct before turning on the ESC. Timing Note: The D10 motors provide a wide range of adjustable mechanical timings, the following are the methods & principles you can follow when adjusting the timing. You can adjust the motor timing after unfastening the screw on the rear end-plate. Please adjust the timing as needed according to the mark (white lines) at the rear end of the motor and fasten the screw after the adjustment. For obtaining optimal performance, you can change the output range and characteristics of your power system by adjusting the motor timing. Increasing the timing can increase the motor speed (RPM), while that also increases the motor temperature and reduces the efficiency. A high(er) timing usually requires a high(er) ratio. Please ensure your ESC is properly programmed before setting the motor timing. For detailed information about ESC programming, please refer to the user manual of the ESC. After the timing adjustment, please ensure that your motor will not get overheat after running a whole pack (i.e. LiPo). You can get the information about the motor temperature via a infra-red temperature gun. If the temperature is too high, please let the motor cool down first and then test again. If the temperature is still too high, then please reduce the timing or increase the FDR (that is to replace the pinion gear with fewer teeth or spur gear with more teeth). This product was added to our catalog on April 21, 2024
$119.99
MST MXS-820136, MST 48mm Steel Great Angle CVD Shaft (2)
MST 48mm Steel Great Angle CVD Shaft (2)
$24.99
MST MXS-820071, MST Machined Shock Piston (4) (3x1.0)
MST Machined Shock Piston (4) (3x1.0)
$8.99
MST MXS848083BK, MST 48P Machined Spur Gear (83T)
MXS848083BK, MST 48P Machined Spur Gear (83T)
$12.99
MST MXS-601029, MST M38-56T Brushed Motor
MST M38-56T Brushed Motor. This motor is designed to be a great option for the MST TCR chassis. Package includes one brushed motor.Specifications:Turn: 56T
$12.99
MST MXS-601010, MST M54 Brushed Motor (26T)
The MST M54 Brushed Motor is a 26 turn closed end bell motor that is included with a variety of MST RTR kits.
$18.99
MST MXS-148013, MST 48P Metal Pinion Gear (13T)
MST 48P Metal Pinion Gear. This pinion gear is made from metal and designed to provide a strong finish. Available in multiple sizes, please select the size you need from the list above. Package includes one pinion gear.
$8.99
MST MXS-148015P, MST 48P Metal Pinion Gear (15T)
MST 48P Metal Pinion Gear. Made from durable metal, this pinion is designed to fit standard motors with a 3.17mm bore. Package includes one pinion gear.
$7.99
MST MXS-210642BK, MST RMX 2.0 Aluminum Rear Gearbox Set (Black)
MST RMX 2.0 S Ball Differential Outdrive Joint. These are the replacement outdrives for the RMX 2.0 S ball diff. Package includes two outdrives, t-nut and two spreader rings.
$124.99
MST MXS-230062, MST RMX 2.0 S Front Arm Set
MST RMX 2.0 S Front Arm Set. Package includes one front upper arm, one front lower arm and spacers that can be used on the right or left side of the chassis
$12.99
MST MXS-210070, MST RMX 2.0 S HT Rear Lower Arm & Wheel Hub
MST RMX 2.0 S HT Rear Lower Arm & Wheel Hub. This is the replacement 4 hole rear arm and wheel hub. Package includes one arm and one wheel hub that can be used on the right or left side of the chassis.
$8.99
MST MXS-230061-1, MST RMX 2.0 S Rear Gear Box Set
MST RMX 2.0 S Rear Gear Box Set. Package includes replacement transmission case halves, bearing holder, and spur gear mount.
$18.99
MST MXS-210071, MST Damper Cylinder (2)
MST Damper Cylinder. Package includes two replacement plastic shock bodies that are used in the front and rear position on the FXX-D and RMX 2.0 S series vehicles.
$7.99
MST MXS-310064, MST RMX 2.0 S Bevel Gear (2) (16T)
MST RMX 2.0 S Bevel Gear. These are the replacement 16 tooth bevel gears used in the rear gear box. Package includes two gears.
$12.99
MST MXS-310008, MST Shock Shaft (4)
MST Shock Shaft Set. These are the stock replacement shock shaft for the FXX-D and RMX 2.0 S models. Package includes four shock shafts and e-clips.
$8.99
MST MXS-230065, MST RMX 2.0 S Front Head Set
MST RMX 2.0 S Front Head Set. Package includes the three composite parts that make up the front bulkhead assembly.
$18.99
MST MXS-210034, MST Bevel Gear Set (36/17T)
MST Bevel Gear Set. This is the 36 tooth rear main gear and 17 tooth bevel gear used on the FXX-D chassis, but can be used as a gear tuning option on the RRX, RMX, FSX and XXX models as well.
$12.99
MST MXS-310047, MST FXX-D 2.0x22mm Arm Shaft (2)
MST FXX-D 2.0x22mm Arm Shaft. These are the replacement rear outer hinge pins for the FXX-D and RMX 2.0 S models. Package includes two hinge pins.
$4.99
MST MXS-310102, MST RMX 2.0 S Bevel Gear Shaft
MST RMX 2.0 S Bevel Gear Shaft. This is the replacement bevel gear shaft.
$8.99
MST MXS-820050BK, MST Aluminum Damper Spring Retainer (Black) (4)
MST Aluminum Damper Spring Retainers are an option compatible all MST drift cars. These "standard" spring cups are recommended for use with standard length springs (29-30mm). They are available in a variety of colors allowing you to personalize your ride, and each package includes four spring cups. NOTE: Use MXS-820046 for longer length springs. Use with springs that have an inner diameter between 13.8-14.2mm.
$15.99
MST MXS-230063, MST RMX 2.0 S Front Damper Stay
MST RMX 2.0 S Front Damper Stay. This is the stock replacement front shock tower.
$7.99
MST MXS-210025, MST Bevel Gear Set (40/16T)
MST Bevel Gear Set. Package includes 40 tooth rear main gear and 16 tooth bevel gear compatible with the RMX 2.0 S, RRX, FSX, FXX and XXX drift chassis.
$12.99
MST MXS-120001,MST 10x15mm Ball Bearing (4)
MST 10x15mm Ball Bearing. These replacement bearings are intended for the MST FXX-S, RMX 2.0 S or the TCR platform. Package includes four bearings.
$7.99
MST MXS-210035, MST Bevel Gear Set (40/13T)
MST Bevel Gear Set. This is the replacement 40 tooth rear main gear and 13 tooth bevel gear used on the RMX 2.0 S chassis, but can be used as a gear tuning option on the RRX, RMX, FSX, FXX and XXX drift chassis as well.
$12.99
MST MXS-310105, MST RMX 2.0 S Main Shaft
MST RMX 2.0 S Main Shaft. This is the replacement main shaft used in the rear gear box.
$9.99
MST MXS-310032, MST RMX 2.0 S Differential Screw & Spring Set
MST RMX 2.0 S Differential Screw & Spring Set. This is the stock replacement diff screw and spring kit.
$3.99
MST MXS-820079, MST Damper Plastic Maintenance Set (2)
MST Damper Plastic Maintenance Set. Package includes two upper shock caps, two lower spring cups and two lower shock rod ends.
$7.99
MST MXS-210594, MST RMX 2.0 MB Rear Suspension Kit
MXS-210594, MST RMX 2.0 MB Rear Suspension Kit
$39.99