Traxxas 32P Hardened Steel Pinion Gear w/5mm Bore
These are Traxxas 32 Pitch Hardened Steel Pinion Gears. These gears are used for various Traxxas models and feature 5mm Bore center hole, compatible with 5mm motor shafts.
This product was added to our catalog on April 12, 2021
TRA6492, Traxxas Steel Mod 1.0 Pinion Gear w/5mm Bore (29T)
Traxxas Mod 1 Pinion Gear. These gears are intended for use with the Traxxas XO-1 and are available in a variety of tooth count options to fine tune torque and top speed.
Package includes one pinion gear and one set screw.
This product was added to our catalog on May 26, 2021
Arrma Safe-D5 Steel Mod 0.8 Pinion Gears feature a D shaped hole that locks onto the motor shaft and helps to prevent the loss of drive and brakes if the set screw backs out. These gears are machined from steel for durability and fit 5mm motor shafts.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 5mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
0.8 Module Safe-D Pinion Gear
(1) Set Screw - M4 x 4mm
(1) E-Clip - 3.2mm
This product was added to our catalog on March 23, 2021
Arrma Safe-D5 Mod1 Pinion Gear
Arrma Safe-D5 Mod1 Pinion Gears feature a "D" shaped hole that allows the motor shaft to key inside the pinion gear, eliminating the loss of drive and brakes if the set screws comes loose. This tough steel Pinion Gear is available in multiple tooth count options, allowing you to fine tune the gear ratio.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 5mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
(1) Mod1 Safe-D Pinion Gear
(1) Set Screw - M4 x 4mm
(1) E-Clip - 3.2mm
This product was added to our catalog on March 14, 2021
TEKTT2518, Tekin Pro4 HD 4-Pole Brushless 550 Motor w/5mm Shaft (4,300kV)
This is the Tekin Pro4 HD 4300kV 4-Pole Brushless Motor. Tekin's Pro4 HD Motor raises the bar in 4wd short course, with the torque and power needed to level the competition. With kV ranges to accommodate 2S, 3S and 4S applications, 1/10 4WD Short Course has never been exposed to this much power! The Pro4 HD's longer 550 can and 4 pole design delivers the off the charts performance gains you need to move your truck to the front of the pack.Features:
Designed to be paired with the RX8 Electronic Speed Control
4 Pole 12 Slot Hi-torque 550 Motor Design
CNC Machined 6061 T6 Billet Aluminum Heatsink Can
Neodymium Sintered Magnets
Rebuildable Design
High Purity Copper Windings Maximizes Efficiency
Precision Engineered for Maximum Energy Conversion
Dual-Plug Sensor Wire Harness for use with all sensored systems
High RPM ABEC5 Oversized Bearings
Specifications:Turns: 1.5DVoltage: 2S - 7.4VkV: 4300Rotor: 18.5mmWeight: 7.8oz / 221gShaft Dimensions: .60x.196" / 15.3x5mmMotor Diameter: 1.4" / 35.8mmMotor Length: 2.5" / 62.5mmBearing Dimensions: Front: 5x14x5mm / Rear: 5x11x5
This product was added to our catalog on December 12, 2021
TEKTT2302, Tekin RX8 GEN3 1/8 Competition Brushless ESC
Tekin's RX8 GEN3 brings bigger power handling capabilities and increased reliability to 1/8 Scale Racing. The RX8 platform has proven itself to handle the rigors of racing, while providing professional features including a programmable High Voltage BEC, Data Logging Capabilities, Timing Profiles, Voltage Cutoffs for LiPos, HotWire 3.0 Bluetooth Connectivity and more. Utilizing Tekin's D2 Dual Drive Mode Technology, the RX8 runs both Sensored and Sensorless motor drives seamlessly, giving you the best of both worlds. The small footprint makes install on any chassis easy with the option of mounting with included hardware for extra security. Combo the RX8 GEN3 with a Tekin T8 Brushless Motor for 1/8 Scale Buggies and Truggies or a Pro4HD for 4WD Short Course domination!
Features:
Updated HD Gold-plated Solder Posts for Easy Soldering
Updated Adjustable Torque Control
Updated Adjustable Throttle and Brake Frequencies
Updated HD High Voltage Programmable BEC
Ultra-smooth and Precise Throttle and Braking Control
Compatible with Brushless and Brushed Motors
Easily Access Programming, Anywhere, Anytime
Datalogging Capability
EZ Access HotWire Programming Port
HotWire Interface for Advanced Programming and Updating
D2: Dual Drive Mode Technology
On-Board Temperature Indicator
HDAC: High Density Copper PCB's
Sensor Plug for Precise Commutation with all Motors
Self Test Diagnostics and Factory Reset
Pit Tune Mode
DGF2: Digital Glitch Filtering V2
QuickTune Programming
One-Touch Radio Calibration
Specifications:
Controls: Forward/Brake/Reverse
Input Voltage: 2S-6S LiPo / 4-16S NiMH-NiCD
BEC: 6.0v / 7.4v @ 8amps
Motor Limit Brushless Mode: 2S - No Limit; 3S - 4000kV; 4S - 3500kV; 5S - 2200kV; 6S - 2200kV
Motor Limit Brushed Mode: No Limit
Max Current: 300amps per phase*
Burst Current: 1000amps per phase*
Timing Profiles: 7 choices (on board)
Brushed Modes: FWD Only / FWD-REV / FWD-REV Delay
Brushless Modes: FWD Only / FWD-REV / FWD-REV Delay
Dimensions: 1.5 x 2.2 x 1.4" / 38 x 55.8 x 35.5mm
Weight: 2.7oz / 76.5g
Recommended Applications: 1/10 4WD SCT, 1/8 4WD Buggy, 1/8 4WD Truggy, 1/8 4WD Monster Truck, 1/8 4WD Touring Car, 1/8 4WD GT, 1/8 Dirt Oval, 1/10 (and larger) Rock Crawler
*Per Manufacturer Specs
This product was added to our catalog on December 12, 2021
