HRAAC03EZ02, Hot Racing 1/10 Aluminum EZ Pulls w/Body Clips (Red) (4)
The Hot Racing 1/10 Aluminum EZ Pulls with Body Clips are an optional accessory for any 1/10 scale to upgrade the body clips and add a little pop of color. The pulls are CNC machined from durable Aluminum for lasting performance and anodized a variety of colors for added strength and style. Attach the pulls to the included body clips to minimize the fumbling and struggle of removing the body from the mounting posts.
Features:
CNC Machine from durable Aluminum
Anodized a variety of colors
Remove body clips with ease
Specifications:
EZ pulls: 0.4 x 0.71 (10 x 18mm)
Body clips: 0.35 x 1.02 (08 x 22mm)
Includes:
(4) EZ Pulls
(8) Body clips
This product was added to our catalog on December 16, 2021
HRASJT254, Hot Racing Traxxas 32P Steel Spur Gear (Silver) (54T)
This is the Hot Racing Steel 32 Pitch, 54 Tooth Spur Gear with Silver hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Silver-colored countersunk washers
Specifications:
Number of Teeth: 54
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) silver-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on May 16, 2021
HRAERVT46M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (46T)
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas X-Maxx
Traxxas XO-1
Traxxas XRT
The Hot Racing hardened steel Mod 1 spur gear is an optional upgrade for the Traxxas E Revo 2.0, X-Maxx 6S and 8S, Maxx 4S and XO-1 models. Choose from 50, 52 and 54 tooth options.
NOTE:
Do NOT use the pin system for setting the X-Maxx gear mesh. Instead, manually set the gear mesh without the pins. Refer to the Traxxas manual for instructions (ref. pg.22 Adjusting Gear Mesh)
With the pins removed, use the four 4x16mm button-head cap screws on the bottom to set gear mesh. Loosen the four 4x16mm button-head cap screws. Cut a narrow strip of notebook paper and run it into the gear mesh. Slide the motor and pinion gear into the spur gear. Tighten the four 4x16mm button-head cap screws, and then remove the strip of paper. You should be able to run a fresh strip of paper through the gears without binding them.
Features:
CNC machined hardened steel construction
Black oxide finished
Laser etched tooth count marking
Upgrade for factory plastic spur gear
Specifications:
Overall diameter: 52.8mm
Gear face width: 8mm
Includes:
One (1) mod 1 steel spur gear
This product was added to our catalog on December 16, 2021
HRASTE288RC, Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shaft (2)
This is a set of Hot Racing Traxxas Slash Rear Light Weight CV Splined Drive Shafts, intended for use with the Traxxas electric Stampede and Rustler models. This is an optional upgrade heavy duty splined star drive axle kit.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Replaces Traxxas TRA1951 half shafts, TRA2753X stub axles, and TRA4628 output yokes
Specifications:
Approximate overall collapsed length: 109mm
Includes:
(2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
Fits:
Traxxas Rustler 2wd
Traxxas Stampede 2wd
This product was added to our catalog on December 16, 2021
HRASTE876, Hot Racing Traxxas 48P Hardened Steel Spur Gear (76T)
Compatibility
Traxxas Bandit
Traxxas Rustler 2wd
Traxxas Slash 2wd
Traxxas Stampede 2wd
Traxxas Telluride 4x4
The Hot Racing Traxxas 48P Hardened Steel Spur Gear is an optional spur gear intended for the Traxxas Bandit, 2WD Slash, Rustler, 2WD Stampede, and Telluride models. The spur gear is available in a variety of tooth count options, please select the specific gear you want from the list above. Package includes one spur gear and mounting hardware.NOTE: Motor temperature should never exceed 180F (under 160 recommended). ESC temperatures should never exceed 160F. Excessive temperatures will shorten the life of the electronics.
Features:
CNC machined and lightened hardened steel construction
Replaces stock nylon spur gear
Black oxide coated gear for durability and corrosion resistance
Red anodized countersunk aluminum washers
High strength hardware
Specifications:
Gear Pitch: 48 pitch
Mounting Holes: 3
Tooth Face width: ~5mm
This product was added to our catalog on February 21, 2022
HRAERVT50M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (50T)
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas X-Maxx
Traxxas XRT
Traxxas XO-1
This product was added to our catalog on December 16, 2021
HRAERVT54M01, Hot Racing E Revo 2.0/X-Maxx/XO-1 Steel Mod 1 Steel Spur Gear (54T)
Traxxas E-Revo VXL 2.0
Traxxas Maxx
Traxxas X-Maxx
Traxxas XO-1
Traxxas XRT
This product was added to our catalog on December 16, 2021
HRAAC03EZ07, Hot Racing 1/10 Aluminum EZ Pulls w/Body Clips (Purple) (4)
The Hot Racing 1/10 Aluminum EZ Pulls with Body Clips are an optional accessory for any 1/10 scale to upgrade the body clips and add a little pop of color. The pulls are CNC machined from durable Aluminum for lasting performance and anodized a variety of colors for added strength and style. Attach the pulls to the included body clips to minimize the fumbling and struggle of removing the body from the mounting posts.
Features:
CNC Machine from durable Aluminum
Anodized a variety of colors
Remove body clips with ease
Specifications:
EZ pulls: 0.4 x 0.71 (10 x 18mm)
Body clips: 0.35 x 1.02 (08 x 22mm)
Includes:
(4) EZ Pulls
(8) Body clips
This product was added to our catalog on December 16, 2021
HRASXTF2604H, Hot Racing Axial SCX24 Brass Axle Weight (Use w/HRASXTF39W04)
Hot Racing Axial SCX24 Brass Axle Weight are a must have option for the Hot Racing +4mm Steel Drive Stub Axle Set (HRASXTF39W04). These brass weights weigh 5 grams each and will help to lower the vehicles center of gravity and increase stability, helping to improve climbing, reduce the chance for flipping backwards, and make for an overall more capable crawler.
Features:
CNC machined solid brass billet
20g of total unsprung weight
Lower the vehicles center of gravity, increase its stability, improve climbing, reduce the chance for flipping backwards, and make for an overall more capable crawler
Specifications:
For: SXTF39W04
Weight: 5g/ea
Includes:
(4) 5g brass +4mm Steel Drive Stub Axlex weight
This product was added to our catalog on December 16, 2021
HRASJT253, Hot Racing Traxxas 32P Steel Spur Gear (Grey) (53T)
This is the Hot Racing Steel 32 Pitch, 53 Tooth Spur Gear with grey hardware for the 1/10 Traxxas E-Revo, Jato 3.3, T-Maxx 3.3, T-Maxx 2.5R, Summit, Rally VXL, Slash 4X4, and Stampede 4X4.
Features:
CNC machined and lightened hardened steel construction
Black oxide coating for durability and corrosion resistance
Grey-colored countersunk washers
Specifications:
Number of Teeth: 53
Gear Pitch: 32 pitch (0.8 module)
Mounting Holes: 3
Tooth Face width: 6mm (0.24 inch)
Internal diameter: ~11mm (~0.43 inch)
Includes:
54 tooth 32 pitch spur gear
(3) mounting screws
(3) grey-colored countersunk washers
(3) washers (use as needed underneath countersunk washers to prevent screw ends from protruding too far through spur mounting plate)
Requires:
Hardened clutch bell or pinon gear
Requires a slipper transmission. Will NOT work with vehicle equipped with a center gear differential. Use Hot Racing SSLF2 series gears for vehicles equipped with a center gear differential.
This product was added to our catalog on December 16, 2021
HRASCX10FT01, Hot Racing Axial Wheel Hub Extensions w/12mm Hex (Black) (2) (+15mm)
Hot Racing Axial 15mm Wheel Hub Extensions add 15mm to the track width of your Axial SCX10, SCX10 II, and Wraith Crawler.Features:
Extends the track width for a wider stance and greater control and stability
Extensions fit over axles and secure to axles with included screw pins. Wheel is secured with long aluminum wheel nut.
NOTE: Replacement M3x2x11mm screw shafts are Hot Racing HRASSP32011Includes:
(2) wheel hub extensions
(2) M3x2x11mm screw pins
(2) long wheel nut
(2) anti-mar wheel washers
This product was added to our catalog on December 16, 2021
DRC-712, DragRace Concepts The Glue - R/C Traction Compound
DragRace Concepts "The Glue" Tire Traction Compound was developed specifically for No Pre R/C Racing. The Glue was developed over the course of one year of track testing to find a specific blend that performed excellent under a wide variety of traction levels, track temperatures and track surfaces. This allowed DRC to develop a "balanced" traction compound that provides excellent grip, but is not overly sticky that it holds the tire down and hinders performance. The Glue is made from high quality components and packaged in a chemical resistant 4oz bottle dauber bottle for easy use and application.
This product was added to our catalog on March 2, 2022
These are the optional Hot-Racing Body Clips with Rubber Leashes and Body Washers.
Features:
Black rubber leash includes an aluminum body washer molded on back and sides with black rubber
Body washer is anodized red
Steel body clips, red in color
Body Clip length: ~21-22mm
HRATRX15EPL06, Hot Racing Traxxas Slash 4x4 Power Up Gear Adapter (Short)
Fits:
Traxxas E-Maxx
Traxxas E-Revo
Traxxas Rally
Traxxas Revo Nitro
Traxxas Slash 4x4
Traxxas Slayer
Traxxas Stampede 4x4
Traxxas Summit 1/10
Traxxas T-Maxx
This product was added to our catalog on May 16, 2021
HRATRXM10H15, Hot Racing Traxxas TRX-4M 7mm Brass Wheel Hexes w/Pins (4) (+1.5mm) (1.5g)
Hot Racing Traxxas TRX-4M 7mm Brass Wheel Hexes with Pins. These optional wheel hexes are intended for the Traxxas TRX-4M. Made from CNC Machined brass, these are designed to lower the CG and increase track width for better stability and tire clearance. Package includes four wheel hexes and four axle pins.Features:
Direct fit to the TRX-4M
Made from CNC Machined brass
Fits standard 3.5mm axle shafts
Increases tire clearance to body and chassis
This product was added to our catalog on February 1, 2023
HRASXTF39W04, Hot Racing Axial SCX24 +4mm Wide Track Steel Drive Stub Axle Set
The Hot Racing Axial SCX24 +4mm Wide Track Steel Drive Stub Axles are a tuning option that adds 5mm to the track width on each side of the vehicle. This helps to increase stability over rough terrain, as well as increase steering clearance to allow a wider selection of tire options.Features:
Increases width of vehicle by 4mm on each side
Increases stability
Increases steering clearance
Increases tire selection
CNC machined hardened spring steel axle
Aluminum +4mm spacer, blue anodized
Upgrades stock axles or provides a replacement for worn or damaged shafts
Fits front and rear
Replaces Axial: drive stub axle part of (AXI31609, AXI31610)
Includes:
(2) +4mm Front Drive Axles
(2) +4mm Rear Drive Axles
(4) spacers
(4) shim
(4) 1.4 x 4mm thin head screw
This product was added to our catalog on December 16, 2021
HRAXMX48A06, Hot Racing Traxxas X-Maxx Aluminum Steering Servo Horn Arm (Blue)
The Hot Racing Traxxas X-Maxx Aluminum Steering Servo Horn Arm is an aluminum steering rack upgrade for the Traxxas X-Maxx.
Features:
CNC machined 6061 aluminum, anodized blue
Replaceable lock nut to help prevent loosening of fasteners
Retains stock double shear design for ultimate reliability
Fits Traxxas 2085 servos
This item replaces Traxxas factory plastic servo horn TRA7747
This product was added to our catalog on March 16, 2021
HRASHS88M, Hot Racing CNC Aluminum Medium Duty Servo Saver
Hot Racing CNC Aluminum Medium Duty Servo Saver. Includes medium tension spring and insert adapters to accommodate 23, 24 and 25T splines.
Features:
CNC 6061-T6 aluminum construction
Blue anodized
Multiple inserts to accommodate many different servo splines
This product was added to our catalog on March 16, 2021
HRAMH550TE06, Hot Racing Clip-On Two-Piece Motor Heat Sink w/Fan (Blue)
Hot Racing Clip-On Two-Piece Motor Heat Sink is compatible with 540 and 550 size motors. Versatile two-piece heat sink clip provides 8 different width adjustments.
Features:
Keeps the motor running cooler
Aluminum construction
Clip on heat sink attaches to 540 and 550 size motors with a 36mm can diameter
Two-piece heat sink clip provides 8 different width adjustment options (20-40mm). M3 screws and nuts will be required for some configurations.
Blue anodized
Laser etched Hot Racing insignia
Specifications:
Overall height: 39mm (1.54 inch)
Fan size: 30x30x7.5mm
Fan mounting hole pattern: 24mm square
Input voltage: DC 7.2-8.4V MAX
This product was added to our catalog on April 3, 2021
HRASLF288RCR, Hot Racing Slash 4x4 Rear Light Weight Metal CV Splined Drive Shaft Set
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Stampede 4x4
This is a replacement Hot Racing Slash Rear Light Weight Metal CV Splined Drive Shaft Set for the Slash, Slash 4X4, Stampede 4X4 and Rustler 4X4.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Includes:
(2) Rear Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
Specifications:Approximate overall collapsed length: 113mm
NOTES:
Replaces factory plastic Traxxas parts
Replacement parts include: SLD425 (M4x2.5x11mm screw shafts)
This product was added to our catalog on December 16, 2021
HRASPN311AR06, Hot Racing Traxxas Spartan Aluminum Adjustable Trim Tab Set (Blue)
Hot Racing Traxxas Spartan Aluminum Adjustable Trim Tab Set.
Features:
Adjusts angle of trim tab assembly for proper hull planing
CNC machined aluminum construction
Pre-drilled for mounting
Anodized blue for durability, corrosion resistance, and great looks
Specifications:
Weight: 0.78oz
length: 33mm (1.30 inches)
width: 30mm (1.18 inches)
height: 24.5mm (.96 inches)
NOTE: Use the stock 4x12mm screws to mount
This product was added to our catalog on December 16, 2021
HRAAC03EZ03, Hot Racing 1/10 Aluminum EZ Pulls w/Body Clips (Orange) (4)
The Hot Racing 1/10 Aluminum EZ Pulls with Body Clips are an optional accessory for any 1/10 scale to upgrade the body clips and add a little pop of color. The pulls are CNC machined from durable Aluminum for lasting performance and anodized a variety of colors for added strength and style. Attach the pulls to the included body clips to minimize the fumbling and struggle of removing the body from the mounting posts.
Features:
CNC Machine from durable Aluminum
Anodized a variety of colors
Remove body clips with ease
Specifications:
EZ pulls: 0.4 x 0.71 (10 x 18mm)
Body clips: 0.35 x 1.02 (08 x 22mm)
Includes:
(4) EZ Pulls
(8) Body clips
This product was added to our catalog on September 20, 2021
HRASHS88H, Hot Racing Aluminum CNC Heavy Duty Servo Saver w/Heavy Spring Tension (Black)
Hot Racing Aluminum CNC Heavy Duty Servo Saver in Black anodize, with a heavy spring tension.
Features:
CNC 6061-T6 aluminum construction
Black anodized
Multiple inserts to accommodate many different servo splines
Specifications:
Length: 1-1/2 inch (38mm)
Diameter: 1 inch (25mm)
23 Tooth Insert (K): (KO, Sanwa, JR, Airtronics, Spektrum)
24 Tooth Insert (H): (Hitec)
25 Tooth Insert (F): (Futaba, Traxxas, SAVOX, Tactic, some of the new Hitec)
Includes:
(1) servo saver
(1) spline adapters for 23 tooth (KO, Sanwa, JR)
(1) spline adapters for 24 tooth (Hitec)
(1) spline adapters for 25 tooth (Futaba)
This product was added to our catalog on February 12, 2022
HRASXTF485TR04, Hot Racing Axial SCX24 Aluminum Threaded Telescopic Shock
The Hot Racing Axial SCX24 Aluminum Threaded Telescopic Shock are a friction damped shock option that provides increased travel compared to the standard type shock. These shocks feature a telescoping type shock body that adds length during extension, and reduces length as the shock compresses, providing more overall shock travel. Tacky grease is recommended to help reduce friction and smooth out the damping. The included faux reservoir shock cap provides realistic scale looks, but is non functional.Features:
Machined aluminum brass construction
Telescopic design for maximum travel
Threaded shock bodies for quick pre-load adjustments
Tacky grease to help with smooth damping
Scale-looking reservoir (non-functioning; for scale only)
Three spring rates included
Replaces Axial AXI31612 SCX24 shock set
NOTE:
Reservoir is non-functional
Mount with wide flange outward to retain O-rings.
Use tacky grease or Silicone diff lub for a heavy coating.
Specifications:Extended length eye-to-eye: ~48.5mmCompressed length eye-to-eye: ~28.5mmStroke: 20mmSpring Length: 32mm 14 Turn (0.3, 0.35, 0.4)
Includes:
(4) Tele shocks
(4) soft springs (black)
(4) Med Spring (Gold)
(4) Firm springs (silver)
(8) M1.4x8 cap head screws
This product was added to our catalog on December 16, 2021
HRAMH550TE02, Hot Racing Clip-On Two-Piece Motor Heat Sink w/Fan (Red)
The Hot Racing Clip-On Two-Piece Motor Heat Sink is a universal clip on motor heat sink and fan for use on 540 and 550 size motors. The versatile two-piece heat sink clip provides 8 different width adjustments.Features:
Keeps the motor running cooler
Aluminum construction
Clip on heat sink attaches to 540 and 550 size motors with a 36mm can diameter
Two-piece heat sink clip provides 8 different width adjustment options (20-40mm). M3 screws and nuts will be required for some configurations.
Red anodized
Laser etched Hot Racing insignia
Specifications:Overall height: 39mm (1.54 inch)Fan size: 30x30x7.5mmFan mounting hole pattern: 24mm squareInput voltage: DC 7.2-8.4V MAXNOTE: Some chassis do not have sufficient room for the fan assembly. Study the photos, and use your best judgement to determine fitment.
This product was added to our catalog on December 16, 2021
HRAWH17HS01, Hot Racing 12mm to 17mm Hex Hub Adapters (4) (6mm Offset)
This is a pack of Hot Racing 12mm to 17mm Hex Hub Adapters, with a 6mm offset. These adapters are compatible with many 1/10th scale vehicles with factory 12mm hex hubs and allow the use of 17mm hex wheels, all while adding a 6mm width extension per side of the vehicle for a wider, more stable, stance.
Features:
CNC machined solid billet aluminum construction
12mm hex to 17mm hex conversion
6mm offset extension per side
17mm wheel nuts
Adapters are anodized silver in color, wheel nuts are anodized black
Wheel nuts feature an internal o-ring to maintain the nut position, even under the most severe conditions
Specifications:
Total length: 20mm
Max axle diameter: 5mm
Axle thread: M4
Hex depth: 5mm
Comments: See Hot Racing HRARSSLF117X for replacement/spare M4 axle hub nuts; O-rings are 11x1mm.
NOTE: These adapters fix a wide array of vehicles. Make sure the vehicle uses a hex at least 5mm thick, or the adapter may bind against the hub.
This product was added to our catalog on December 16, 2021
HRASLF288RCF, Hot Racing Traxxas Slash 4x4 Front Light Weight Metal CV Splined Drive Shaft
This is a set of Hot Racing Traxxas Slash 4x4 Light Weight Front Metal CV Splined Drive Shafts, an optional upgrade heavy duty splined star drive axle kit for the Traxxas electric Stampede 4X4, Slash 4x4, Rustler 4X4 models.
Features:
CNC machined #45 hardened carbon steel, S2 spring steel and Aluminum construction
Replaces factory plastic drive axles
Hard Black Anodized Aluminum Slider
Blue anodized aluminum pin capture rings with rubber o-rings to prevent movement
Design eliminated CV pin setscrew
Hardened S2 Spring steel wheel shaft
#45 Steel is black finish S2 spring in Brown finish
Rubber dust boot to keep the Splined Drive for maximum protection against the elements
Replaces factory plastic Traxxas parts
Specifications:
Approximate overall collapsed length: 112mm
Includes:
(2) Front Cv Splined Drive Shaft spline CVD shaft assemblies
(2) M4x2.5x11mm screw shafts
This product was added to our catalog on December 16, 2021
HRASXTF21H, Hot Racing Axial SCX24 Brass Front Steering Knuckle (2)
Hot Racing Axial SCX24 Brass Front Steering Knuckle.
Features:
CNC machined solid brass
Adds a total of 16g unsprung weight to improve the lower center of gravity
Cutouts on knuckle for access to outer bearing race for easy bearing removal
Direct replacement for factory plastic steering knuckles
Includes:
(2) 8g Brass steering knuckles
This product was added to our catalog on December 16, 2021
The Hot Racing Axial SCX24 Aluminum Threaded Long Travel Oil Shocks are a great option for adding travel to your Axial SCX24. These shocks are machined from aluminum and feature threaded bodies for quick pre-load adjustments. Internally these use silicone oil (not included) instead of the typical friction dampening and employ bladder seals for consistent rebound dampening. Three spring rates are included allowing you to fine tune these shocks to your chassis.NOTE:
Mount with wide flange outward to retain O-rings.
Use silicone shock oil (not included)
Features:
Made from machined aluminum
Bladder seals for consistent rebound dampening
Threaded shock bodies for pre-load adjustments
Three spring sets are included for fine tuning
Replaces Axial AXI31612 SCX24 shock set
Specifications: Length Eye-to-Eye: 42mmCompressed Length Eye-to-Eye: 28mmTravel: 14mmIncludes:
(4) Shocks
(4) Soft Springs (Black)
(4) Medium Springs (Gold)
(4) Firm Springs (Silver)
(8) 1.4x8mm Cap Head Screws
The Hot Racing Axial SCX24 1.0 Micro Rock Crawler Z Tire brings scale looks and performance traction to the SCX24. Using deep Z lugs and strong sidewalls the Hot Racing Z Tire provides excellent traction in loose terrain while keeping the sidewall flex down in high traction environments. Features:
Advanced Rubber Compound
Designed to fit Axial SCX24
Specifications:
Outer Diameter: 54mm / 2.12inch
Width: 19mm / 0.75inch
Inner Diameter: 23.5mm / 0.93inch
Weight: 0.3 oz / 8 g (Per Tire)Includes:
(4) Rock Z 1.0" Tires
HRATRXF03ERP01, Hot Racing Traxxas TRX-4 Aluminum Diamond Rear Bumper
The Hot Racing Traxxas TRX-4 Aluminum Diamond Rear Bumper features LED light buckets, tow shackles and receiver. This bumper fits the Traxxas TRX-4 or Axial SCX10 II.
Features:CNC machined billet aluminum bumper, anodized semi-flat blackSolid aluminum stingerTwo machined LED mounts fit 5mm LEDTwo ACC808X02 red metal tow shacklesEight bumper mounting positionsSpecifications:Width: 203mmHeight: 20mmWidth: 24mmWeight: 110g
NOTE:For Dingo and Honcho you will need the need the SCX10 Jeep AX80125 bumper mountReplacement red tow shackles are Hot Racing ACC808X02
This product was added to our catalog on December 16, 2021
