4S LiPo
Traxxas TRA2973, Traxxas EZ-Peak Live Multi-Chemistry Battery Charger w/Auto iD (4S/26A/200W)
TRA2973, Traxxas EZ-Peak Live Multi-Chemistry Battery Charger w/Auto iD (4S/26A/200W) The EZ-Peak Live Dual iD Charger takes all the advanced features of the EZ-Peak Live and supercharges the power output to over 26 amps (200 watts)! The 4s capable multi-chemistry dual charger uses built-in Bluetooth to work seamlessly with the Traxxas EZ-Peak Live app for iOS and Android! The EZ-Peak Live app gives you detailed information, remote monitoring, and advanced operating functions through the high-definition color interface on your mobile device. It’s the most powerful, most advanced charger in the popular EZ-Peak lineup. Get back in the action sooner with the new EZ-Peak Live Dual Charger! Patent Pending iD Technology Just plug in a Traxxas iD-equipped battery and press start - that’s all there is to it! The iD system detects which Traxxas iD-equipped battery you are using and automatically configures the settings for the optimal charge. The progress bar and audible alerts keep you informed while the advanced high-resolution peak detection delivers a perfect charge every time. The EZ-Peak Live’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. MAXX Power The MAXX Charge feature takes full advantage of LiPo batteries’ high charge rates. Press the MAXX Charge button and the right side charges at the maximum charge rate the battery will allow (up to 16 amps). The left side receives the remaining power until the right side finishes and then the left side switches to MAXX power mode. This innovative design gets one battery ready in nearly half the time so you’re back in the action having fun. Charging Flexibility The charger automatically detects the type and size of your iD-equipped battery and configures the settings for the fastest charge possible. With 200 watts of power on tap, EZ-Peak Dual maximizes its charging potential for NiMH and LiPo batteries. Two high-flow fans keep the temperature down for extended charging sessions. Dual balance ports provide backwards compatibility for batteries with external balance leads. There’s even a special 2-amp USB output to charge your mobile device. Technology The free EZ-Peak Live App installs on your Apple® iPhone®, iPad®, iPod® touch, or Android™ device and links to your charger via built-in Bluetooth®. The EZ-Peak Live App gives you access to additional features, such as a high-definition graphical user interface, firmware upgrades, remote monitoring and alerts for up to 4 chargers, detailed live charging information, and the ability to turn off iD mode. iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors. Features: 200 Watt 26+ amp output Recognizes iD-equipped batteries to optimize charger settings MAXX Charge feature gets you back in the action quickly Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface with dual LED charge progress indicators Supports Traxxas EZ-Peak Live Application Audible alerts Dual high-flow cooling fans Advanced Mode for full manual control through EZ-Peak Live App Legacy support for all Traxxas High-Current Connectors Integrated dual balance ports for conventional LiPo batteries Built-in 2-amp USB charger output port Charges Dual 5-8-cell NiMH batteries Charges Dual 2s, 3s, and 4s LiPo Batteries Specifications: AC Input: 100-240V, 50-60Hz, 2.35A Charge Current Range: 1.0—26.0A+ Discharge Current Range: 750mAh Current Drain for Balance Ports: 750mAh NiMH Battery Cell Count: 5-8 Cells LiPo Cell Count: 2-4 Cells Dimensions: 204 x 174 x 68mm Important Customer Note: Accessing some charger features requires a mobile device with Bluetooth capability (sold separately) and the Traxxas EZ-Peak Live Application. This product was added to our catalog on April 7, 2021
$169.99
Traxxas TRA2889X, Traxxas Maxx 4S 25C LiPo Battery (14.8V/5000mAh)
TRA2889X, Traxxas Maxx 4S 25C LiPo Battery (14.8V/5000mAh) This is a Traxxas 5000Mah 14.8V 4-Cell 25C Lipo Battery, a Certified iD-Equipped LiPo battery that is engineered to provide the punch and on-demand power for achieving the top speeds that Traxxas models designed to reach. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specifications: Type: LiPo Total Capacity: 5000mAh Voltage: 14.8V C Rating: 25 Length: 155mm Height: 34mm Width: 45mm Weight: 16.8g This product was added to our catalog on April 7, 2021
$99.95
Traxxas TRA2971, Traxxas EZ-Peak Live Multi-Chemistry Battery Charger w/Auto iD (4S/12A/100W)
TRA2971, Traxxas EZ-Peak Live Multi-Chemistry Battery Charger w/Auto iD (4S/12A/100W) This is the Traxxas EZ-Peak Live Multi-Chemistry Battery Charger, with iD Auto Battery Identification. There has never been an easier or safer way to charge your batteries than with the Traxxas iD system. Now you can bring that technology to bear using your smartphone or tablet! Connect to the EZ-Peak Live app on your mobile device to experience a high definition graphical user interface. Your mobile device now becomes a powerful tool to check battery cell voltage, monitor charge status, create and store battery profiles, receive alerts, and access advanced user functions and information. The EZ-Peak Live charger recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and the EZ-Peak Live does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Live Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Advanced high-resolution peak detection deliver a perfect charge every time. Parental lock function for worry-free iD-only charging, or full manual control through the free Traxxas EX-Peak Live app. NOTE: Accessing some charger features requires a mobile device with Bluetooth® capability (sold separately) and the Traxxas EZ-Peak Live Application. Available here for iOS and here for Android. Features: Charger: 100-Watt 12-amp output Recognizes Traxxas iD-equipped batteries to automatically program and optimize charger settings LED charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Supports Traxxas EZ-Peak Live Application Audible alerts Built-in cooling fan Advanced Mode for full manual control through EZ-Peak Live App Legacy support for all Traxxas High-Current Connectors Built-in balance port for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2s, 3s, and 4s LiPo Batteries EZ-Peak Live App: Check battery cell voltage, estimated time remaining, and mAh added Configure charge settings with an easy-to-use graphical interface Recognizes and remembers settings for up to 4 connected chargers Pass code lock prevents access to manual mode Create Battery Profiles and store commonly used settings Upload firmware updates to charger to get the latest features Remote monitoring and alerts for up to 4 chargers iD mode may be switched off through the EZ-Peak Live Application for charging first-generation Traxxas batteries with non-iD High-Current Connectors Click here for iOS App Click here for Android App Specifications: AC Input: 100–240 Volts, 50-60Hz, 1.5A Charge Current Range: 1.0-12.0A Discharge Current Range: 665mAh Current Drain For Balance Ports: 665mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–4 Cells Net Weight: 526g Dimensions: 133 x 169 x 55mm This product was added to our catalog on May 7, 2021
$119.99
Traxxas TRA2996X, Traxxas EZ-Peak Live 4S "Completer Pack" Battery Charger w/One Power Cell Battery (5000mAh)
TRA2996X, Traxxas EZ-Peak Live 4S "Completer Pack" Battery Charger w/One Power Cell Battery (5000mAh) This is the Traxxas EZ-Peak Live Multi-Chemistry Battery Charger System with an included "Power Cell" 5000mAh 4S LiPo battery. This charging system uses the Traxxas iD Battery Identification System and is a great solution when you need a battery and charger for your Traxxas vehicle that runs one 4S LiPo battery. iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and the EZ-Peak Plus does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Manufacturer Warranty for years of reliable service. Charger Specifications: AC Input: 100–240 Volts, 50-60Hz, 1.5A Charge Current Range: 1.0-12.0A Discharge Current Range: 665mAh Current Drain For Balance Ports: 665mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–4 Cells Net Weight: 526g Dimensions: 133 x 169 x 55mm TRA2889X Battery Specifications: Type: LiPo Total Capacity: 5000mAh Voltage: 14.8V C Rating: 25 Length: 155mm Height: 34mm Width: 45mm Weight: 16.8g Includes: (1) TRA2971 Battery Charger (1) TRA2889X 5000mAh 4S 25C LiPo Battery w/iD This product was added to our catalog on May 7, 2021
$189.99
Gens Ace GEA75004S10D5, 15.2V 7500mAh 4S 100C HV Lipo: DEANS
GEA75004S10D5, 15.2V 7500mAh 4S 100C HV Lipo: DEANS Gens Ace batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All Gens Ace batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery. Specifications: Voltage: 15.2V / 4S1P / 4 Cell Discharge Rate: 130C Max Burst Discharge Rate: 200C Capacity: 7500mAh Dimensions: 139x47x48.5mm (LxWxH) Weight: 584g Plugs: 5mm Bullets with T-Style Adapter This product was added to our catalog on November 18, 2021
$143.99
ProTek RC PTK-5106-22, ProTek RC 4S 120C Low IR Si-Graphene + HV LiPo Battery (15.2V/6500mAh) w/5mm Connector (ROAR Approved)
PTK-5106-22, ProTek RC 4S 120C Low IR Si-Graphene + HV LiPo Battery (15.2V/6500mAh) w/5mm Connector (ROAR Approved) The ProTek R/C 4S 120C Graphene + HV 6500mAh LiPo Battery is a great battery option for anyone looking for a high capacity, high output 4S battery. Weighing 578 grams, the 4S HV is lighter than a standard 4S pack, with much higher capacity. This provides more runtime, and a dramatic increase in voltage and punch over the course of a run. This battery is designed to have improved power to weight ratios while maintaining a low CG. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 120C Packs deliver the power needed by serious racers and enthusiasts alike. Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 120C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 120C Graphene + packs are perfect for racers and bashers that demand the absolute best. NOTE: This battery is not recommended for high current draw 8S applications. Features: Lighter than a hardcase 4S LiPo pack of equal capacity Improved power to weight ratio and a lower overall CG More runtime, with a dramatic increase in voltage and punch Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery Improved efficiency, lower operating temperatures, and lower internal resistance! Increased run time, increased cycle life and increased voltage! More capacity gram for gram when compared to standard LiPo cells Perfect for stock class racers looking to shave grams 10C max charge rates - 1C charge rate recommended for longest life 15.2V nominal voltage 5mm bullets and 5mm to 4mm bullet adapters included Replacement XH4S balance adapter also available separately (PTK-5331) NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack. Battery Model 4S HV LiPo ROAR Approved Yes Type Silicon Graphene Voltage 15.2V nominal Capacity @7.4V 6150mAh Capacity @7.6V 6500mAh Weight 578 g Connector Type 5mm Bullet Balance Connector 5 pin XH Number of Cells 4 Cell Configuration 4S2P Dimensions (WxLxH) 48x138x48mm Maximum Charge Rate 10C (65A) Burst Current 120C Watt Hour @7.6V 98.8 Wh Includes: (1) ProTek R/C LiPo Battery (2) 5mm Bullet Connectors (2) 5mm to 4mm Reducer Bullet Connectors (1) 4S Balance Lead LITHIUM POLYMER SAFETY INFORMATION IMPORTANT: DO NOT leave the battery in your model when charging DO NOT leave unattended when charging LALWAYS balance charge the battery ALWAYS use a LiPo charging bag YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!) YOU MUST not over discharge the Li-Poly battery pack READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on January 24, 2022
$179.99
Gens Ace GEA10K4S10E5, Gens Ace 4S LiHV Advanced Series LiPo Battery 100C (15.2V/10000mAh) w/EC5 Connector
GEA10K4S10E5, Gens Ace 4S LiHV Advanced Series LiPo Battery 100C (15.2V/10000mAh) w/EC5 Connector The Gens Ace Advanced Series LiPo Batteries are the next level in battery technology. Designed to be more user friendly, these batteries feature a LED power indicator, voltage status indicator, overcharge prevention and self-storage mode. These features give you a battery that delivers extreme power while with providing peace of mind.Gens Ace batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All Gens Ace batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery. Features: 4.35V HV lithium technology LED power status indicator informs you of battery health Voltage status indicator Self-Storage mode discharges battery to safe levels after 5 days of no use Overcharge prevention technology Specifications: Voltage: 4S (15.2V) Capacity: 10,000mAh Discharge Rate: 100C Weight: 33.55oz (952g) Dimensions: 6.49x1.85x2.67" (165x47x68mm) (LxWxH) Connector Type: EC5 This product was added to our catalog on June 30, 2022
$131.79
PowerHobby PHB4S9000120EC5, 4S 15.2V 9000mah 120C Graphene Lipo Battery w/ EC5 Plug
PHB4S9000120EC5, 4S 15.2V 9000mah 120C Graphene Lipo Battery w/ EC5 Plug This product was added to our catalog on October 14, 2023
$169.99
Gens Ace GEA4S220045D, Gens Ace 4S LiPo Battery 45C (14.8V/2200mAh) w/Deans
GEA4S220045D, Gens Ace 4S LiPo Battery 45C (14.8V/2200mAh) w/Deans Gens Ace batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All Gens Ace batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery. Specifications: Voltage: 14.8VDischarge Rate: 45CCell Count: 4S1PCapacity: 2200mAhDimensions: 106x34x30mm (LxWxH)Weight: 260gPlugs: Deans This product was added to our catalog on May 8, 2024
$39.99
Spektrum SPMX224S50, Spektrum RC 4S Smart G2 LiPo 50C Battery Pack (14.8V/2200mAh) w/IC3 Connector
SPMX224S50, Spektrum RC 4S Smart G2 LiPo 50C Battery Pack (14.8V/2200mAh) w/IC3 Connector The Spektrum RC 4S Smart G2 LiPo 50C Battery Pack with IC3 Connector provides pilots and drivers with an array of Smart benefits; Not only are charging parameters and performance data stored and uploaded automatically to Smart chargers, but no balance lead is needed — just one easy IC connection. Smart G2 batteries come from the factory programmed to discharge automatically to a safe storage voltage of 3.90V after 72 hours of inactivity. The benefits include longer battery life, better performance over the life of the pack, and the peace of mind that comes from knowing your Smart battery is maintenance-free. You can change the battery's Auto Storage settings based on your own preferences. G2 batteries also offer a storage discharge rate that's three times faster than the previous G1 Smart batteries. Enjoy the Smart Battery advantage of not having to set your own charging preferences. When a Smart G2 LiPo battery is connected to a Spektrum Smart charger, its unique charging parameters and health information upload to the charger from the battery's integrated memory microchip. Through the charger you can view and set preferences such as charge rates, so all that's required to charge the pack is connecting it to your Smart charger. That's the Smart Battery Advantage! Note: G2 batteries require the use of a Spektrum™ G2 Smart Charger or earlier Smart Charger with G2 update. Features: Simpler and safer to use Balance charge through the IC3® or IC5® connector data wire — with only one connection, no balance lead required Faster Auto Discharge at up to 1.5A to safe storage voltage for long battery life and improved performance Thicker internal metal side plates protect cells and improve heat dissipation Integrated microchip stores unique parameters for each battery IC3® and IC5® connectors are also compatible with EC3™ and EC5™ styles Specifications: Maximum Burst Discharge Rate: 50C Watt Hours: 32.56 Normal/Standard Charge Current: 5A Hard Case: Yes Battery Capacity: 2000-2999mAh Battery Voltage: 14.8V Product Width: 1.33" (34 mm) Product Height: 1.08" (27 mm) Battery Balance Connector: G2 Smart Normal/Standard Charge Rate: 1C Product Length: 4.96" (126 mm) Product Weight: 9.17oz (260g) Application: Aircraft Charge Protection Circuitry: Yes Connector Type: IC3 Wire Gauge: 12 AWG Battery Type: LiPo (3.7V per cell) Capacity: 2200mAh Number of Cells: 4 This product was added to our catalog on August 5, 2021
$62.99
Traxxas TRA2890X, Traxxas 4S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (14.8V/6700mAh)
TRA2890X, Traxxas 4S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (14.8V/6700mAh) The Traxxas 4S "Power Cell" 25C LiPo Battery delivers 6700mAh capacity and 50C burst discharge rate for power, performance, and runtime. Built using the same sturdy construction methods as the Traxxas 2-cell and 3-cell batteries, but checking in at over 30-volts in 8s configuration, Traxxas 4-cell LiPos will stand X-Maxx on its wheelie bar and have it catching massive air as fast as you can grab the throttle. Features: Traxxas High-Current Connectors Integrated LiPo Balance Charging Wires Semi-Rigid Construction for efficient packaging Oversized Discharge Tabs for minimum resistance Hard-wired 12-gauge Maxx Cable soldered to cells Center Wire Exit for guaranteed proper fitment (L) 185mm x (W) 50mm x (H) 44mm 675 Grams (average) Accessory part for these models: Traxxas Maxx Traxxas Unlimited Desert Racer Traxxas X-Maxx Traxxas XRT This product was added to our catalog on April 7, 2021
$139.99
PowerHobby PHB4S520050LCGEC5, Powerhobby 4s 14.8v 5200mAh 50c Lipo Battery w EC5 Plug Hard Case LCG
PHB4S520050LCGEC5, Powerhobby 4s 14.8v 5200mah 50c Lipo Battery w EC5 Plug Hard Case LCG POWERHOBBY 4S 14.8V 5200MAH 50C LIPO BATTERY W EC5 PLUG HARD CASE LCG 50C Continuous / 100C Brust Perfect for 1/10 & 1/8 scale vehicles, Boats, Planes, Drones. When you want a powerful battery pack that you can depend on even when you push it to its limits, this 4s 5200mah 50C LiPo Battery is for you. Powerhobby Power Pro Series lipo batteries offers very high power and very long run time for your RC models. The 100C burst rate enhances your driving experience no matter what type of driving you are into.These batteries packs are made with superior Lithium Polymer raw materials. The advanced stacking technology enables a single cell of capacity to reach 5200mah. Powerhobby Power Pro Batteries are your ideal choice for your RC Applications Application(s): 1/10 / 1/8 scale cars, trucks, and buggies, DronesDischarge Connector: ec5Balance Connector: JST-XHLenth : 138mmWidth :47mmHeight:38mmWeight: 16.5 Ounces Includes : 1 Battery Warranty: This LiPo Battery Pack is guaranteed, under warranty, against defects in materials and workmanship upto 6 Months from the day of purchase•This warranty does not cover physical damage to the battery pack as the result of a crash, hard landing, impropermounting or any deformity caused by the user.•This warranty does not cover internal damage to the battery pack due to overcharging, deep discharging, or excessivedischarge current. This product was added to our catalog on July 25, 2024
$75.99
EcoPower ECP-5119, EcoPower "Basher" 4S 100C Hard Case LiPo Battery w/EC5 (14.8V/5000mAh)
ECP-5119, EcoPower "Basher" 4S 100C Hard Case LiPo Battery w/EC5 (14.8V/5000mAh) This EcoPower 4S Hard Case LiPo Battery is your go-to option when it's time pull the trigger wide open, light up the tires and fling some dirt! Sized for Arrma, Losi and more, this battery features a hard plastic exo-skin that protects the inner cells from the abuse of bashing. The case also features wire slots designed to allow the leads to sit flat, in the event you stack two batteries together for 8S use. For Arrma vehicles that use the long inboard hook & look strap, you'll find the balance lead and ESC wires spaced apart to allow that strap to secure the batteries without damaging the wires. Features: Hard plastic case Stackable design 100C discharge rate 5000mAh of capacity EC5 connector (compatible with IC5) Also available as a 3S (ECP-5118) Specifications: Type: Lithium Polymer Capacity: 5000mAh Voltage: 14.8V nominal Connector Type: EC5 Ultra (12GA Wire) Balancer Type: Align/E-Flite compatible (XH) Number of Cells: 4 Weight: 420g Dimensions (WxLxH): 47x139x37mm Maximum Charge Rate: 2C (8.2A) NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell) Do not use the battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on December 16, 2021
$99.99
PowerHobby PHBPH107829, Power Hobby - One Way Bearing 14mm Hex HPI Nitro Star F3.5 V2 / F4.6 V2
PHBPH107829, Power Hobby - One Way Bearing 14mm Hex HPI Nitro Star F3.5 V2 / F4.6 V2 This product was added to our catalog on July 22, 2024
$14.99
BetaFPV DarwinFPV BNF Baby Ape II Analog 3.5" Micro Quad - 4S - Choose Your Receiver
Pre-Orders shipping ASAP! For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer. DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ. BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h. The 4S version comes with powerful 1504-3600Kv motors, and choose between PNP (No RX) or ELRS 2.4GHz for your receiver! Check out our other pre-built quads, as well as the rest of our DarwinFPV selection! Features Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high-cost performance; It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster; The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable; The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash; The independent action camera base can be used with naked GoPro, thumb camera, etc. to record amazing images during flight at 4K/60 frames. Specifications Brand: DarwinFPV Model: BabyApe Ⅱ 4S Frame: Wide X Wheelbase: 156mm Size: 126mmx150mmx50mm Flight Control: F411 MPU6500 AT7456E Firmware:DARWINF411 Firmware: BETAFPV_Nano_2400_RX The receiver's factory firmware is ELRS_V3.2.0 Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB ESC: Bluejay 48KHz 3-6S 30A Motor: 4S version:1504-3600KV Propeller: HQProp T3.5x2x3GR-PC Weight: 135.4 g (analog version) Receiver: ELRS 2.4GHz Darwin FPV "Cement" Ultra Durable FPV Drone Camera Sensor type:1/3" CMOS Sensor Image:16:9 TV System: NTSC Horizontal Resolution:1200TVL Lens:2.1mm 160° Electronic Shutter: 1/50~1/100000 sec Video Output: CVBS Min. Illumination:0.001Lux wb: automatic DNR: 3D DNR WDR: 100db Input voltage: DC 3.7-24V Working current:80mA@DC12V/170mA@DC5V IP: IP67 Size:19x19mm Weight:7.9g DarwinFPV 25/200/400/600mW VTX Output Power: 25/200/400/600mW(adjustable) Frequency: 5.8Hz 40port Power Supply Voltage Range: 5V Weight: 3.5g Pitch: 28x15mm(length x width) Protocol: SmartAudio Indicator Light Description: Includes 1x DarwinFPV BNF Baby Ape V2 3.5" Analog Micro Quad - 4S - Choose Your Receiver 4x HQProp T3.5x2x3GR-PC 2x Battery cable strip ( 10x170mm) 2x EVA shock pad(thickness:10㎜) 1x Spare screws bag 1x Sticker 1x Manual
$157.99