ASC5465, Team Associated Silicone Differential Fluid (2oz) (1,000,000cst)
This is a 2oz bottle of a bottle of Team Associated Silicone Differential Fluid. Made in the USA exclusively for Team Associated by Lucas Oil Products. The thicker the oil, the less your differential will "diff out" in the corners, where the two tires will turn at different speeds. Changing the differential oil in your diffs is one of the most important tuning options for off-road vehicles. Choose from a variety of weights from the pull down menu.
This product was added to our catalog on May 11, 2021
ASC9654, Team Associated 48P Spur Gear (87T)
Team Associated 48 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on January 29, 2021
ASC70030, Team Associated SR10 RTR Brushless Dirt Oval Car w/2.4GHz Radio & DVC
The Team Associated SR10 RTR Brushless Dirt Oval Car is ready to take to the track for tire-scorching racing action on dirt, clay and pavement.
The SR10 Dirt Oval Race Car is based on the 9-time ROAR Short Course National Championship winning trucks, featuring a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system as well as Team Associated's DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear digital high-torque servo and a water-resistant enclosed receiver box. All of this packaged together in an outstanding factory-finished body with integrated rear spoiler. This SR10 beast will keep you cornering with the included high-grip street stock-inspired treaded tires and lightweight wheels.
Features:
2.4GHz 2-channel radio with new DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
Lightweight street stock-inspired wheels
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs
2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
Rugged steel turnbuckles for adjustable camber and front toe-in
Adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Many Factory Team options already available!
Metric hardware throughout
22 precision rubber-sealed ball bearings
Specifications:
Scale: 1/10
Power: Electric
Length: 536.4mm (21.12in)
Width: 250mm (9.84mm)
Weight: 1424g (3.14lbs)
Wheelbase: 277.8mm (10.94in)
Transmission Ratio: 2:6:1
Included:
(1) SR10 RTR Brushless Dirt Oval Car Kit
(1) 2.4GHz Radio & DVC
Needed to Complete:
(4) AA batteries for transmitter
(1) 6-cell sub-C rechargeable NiMH battery or 2-cell LiPo battery
Battery charger
This product was added to our catalog on May 6, 2021
ASC20160, DR28 Drag Race Car RTR
Team Associated's DR28 1:28 scale electric 2WD RTR Drag Race Car may be small in size, but it's packed full of features and ready for fun right out of the box. The DR28 is a no-nonsense pint-sized Drag Car that looks great and drives smooth thanks to a powerful electric motor and capable drivetrain.
No need to prep or build your racer; just charge it and you're ready to drive! The included 2.4GHz transmitter allows complete control, enabling you to navigate around, through and over obstacles with ease! The DR10-inspired wheels and body make for a great-looking package that will also perform well on the staggered-size foam tires.
When the DR28's integrated LiPo battery becomes discharged, the convenient built-in transmitter charger makes it easy to get back to full power and ready to run in less than an hour. A built-in rechargeable LiPo battery and 4 AA's are included, making the car ready to go right out of the box!
Features:
Everything included in the box–just charge and go!
Drag car-inspired body and wheels
2.4GHz 2-channel radio with integrated charger
Integrated ESC/Receiver unit
Integrated proportional servo
ASC91150, Team Associated M4 Low Profile Serrated Steel Wheel Nuts (10)
This is a replacement set of Team Associated M4 Low Profile Serrated Steel Wheel Nuts. Package includes ten M4 nuts.
This product was added to our catalog on October 20, 2021
ASC91758, Team Associated 12mm Hex 2.2" "Slim" Front Buggy Wheels (Yellow) (2) (B6)
The slim front wheels are designed for use with all popular carpet and AstroTurf surface tires. It features the same offset as the popular ASC9691 and ASC9690 2WD front wheels, only with an optimized profile.
The wheels are textured on the gluing surface for secure tire mounting and have a smooth polished face for a factory team look. They are lightweight, yet stiff to reduce wheel deflection under hard cornering.
Features:
Slim profile for carpet and AstroTurf(TM) tires
Lightweight and rigid
Textured gluing surface for secure tire mounting
12mm hex
Fits RC10B6 and B6D
Also available in White (ASC91757)
This product was added to our catalog on July 3, 2021
ASC91438, Team Associated CVA Rebuild Kit
This is a replacement Team Associated CVA Rebuild Kit. This package includes two CVA couplers and two CVA pins.
This product was added to our catalog on March 13, 2021
ASC9003132C, Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo w/2.4GHz Radio, DVC & Battery & Charger
The Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy Combo includes a Reedy Compact Balance Charger (ASC27201) and Reedy 7.4V 2S LiPo Battery with T-plug (ASC751). This buggy was engineered using Team Associated's vast knowledge and success in the 1:10 scale 2WD racing category. Since the introduction of the RC10 in 1984, the Team Associated RC10 buggy platform has won 13 of the 18 I.F.M.A.R. World Championships contested since the class began. You now have the chance to drive a buggy derived from this race-winning heritage with the beginner-friendly, capable and powerful RB10.
The RB10 buggy roars to life with a water-resistant high-power Reedy brushless speed control, 3300kV brushless motor, a 2.4GHz 2-channel radio system and the Drive Vehicle Control (DVR) receiver with a built in gyro. The DVR system is able to be tuned to different settings that will allow for more or less gyro control. The RB10 is equipped with the Reedy metal-gear, digital high-torque servo, and a water-resistant enclosed receiver box. All of this sits under the outstanding factory-finished off-road buggy body with wing. The RB10 will keep you accelerating and cornering with the included aggressive off-road treaded tires and lightweight 12mm hex wheels.
The RB10 will perform on most surfaces you throw it at, from asphalt to dirt as well as any prepared track surfaces. This buggy makes for a great basher and a good platform to try your skills out on the track.
Features:
Combo includes a Reedy Compact Balance Charger (ASC27201) and Reedy 7.4V 2S LiPo Battery with T-plug (ASC751)
2.4GHz 2-channel radio with a DVC (Dynamic Vehicle Control) receiver featuring a built-in adjustable gyro
High-torque, metal-gear Reedy servo with spring style servo saver
Powerful Reedy 3300kV brushless motor
Water-resistant, high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff
Water-resistant, enclosed receiver box
Factory-finished off-road buggy body and wing, with two color schemes to choose from (blue and red)
Off-road buggy race car-inspired dish wheels
High-grip, off-road tires with aggressive tread pattern
Aluminum 12mm big bore coil-over shock absorbers
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs
Rear CVA driveshafts for more durability
2.6:1 ratio gearbox with heavy-duty sealed gear differential and extremely adjustable slipper clutch
Rugged steel turnbuckles for adjustable camber and front toe-in
Adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Metric hardware throughout
22 precision rubber-sealed ball bearings
Many Factory Team options already available!
Specifications:
Scale: 1:10
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Assembly Level: Assembled
Power: Electric
Length: 400mm (15.75”)
Width: 248mm (9.76”)
Wheelbase: 277.8mm (10.94")
Weight: 1405g (3.1lb)
Drive: 2WD
Transmission Ratio: 2.6:1
Includes:
(1) Team Associated RB10 RTR 2WD Buggy
(1) 2.4GHz 2-channel Radio
(1) Reedy Charger
(1) Reedy 2S Lipo Battery
Needed to Complete:
(4) AA Batteries for Transmitter
This product was added to our catalog on May 11, 2023
Team Associated DR10 RTR Brushless Drag Race Car Combo (Orange) w/2.4GHz Radio, DVC, Battery & Charger
The Team Associated DR10 RTR Brushless Drag Race Car Combo with 2.4GHz Radio with DVC, Battery and Charger is a complete setup developed for No Prep racing, and built upon the 9-time R.O.A.R. Short Course National Championship platform.
This DR10 Drag Race Car features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as Team Associated's DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box. The DR10 RTR Brushless LiPo Combo includes a Reedy Compact Balance Charger and Reedy 7.4V 2S LiPo Battery with T-plug to get you on the streets even faster.
Features:
Based on the 9-time R.O.A.R. National Champion short-course race truck platform
2.4GHz 2-channel radio with DVC receiver (Dynamic Vehicle Control) featuring built-in adjustable gyro
Three-position wheelie bar with optional large wheels
High-torque, metal-gear Reedy servo with spring style servo saver
Powerful Reedy 3300kV brushless motor
Factory finished two-piece Reakt drag race body with rear spoiler
Water-resistant high-powered Reedy brushless speed control with T-plug connector and Lipo low-voltage cutoff
Aluminum 12mm big bore coil-over shock absorbers
Rear CVA driveshafts for more reliability
Water-resistant enclosed receiver box
Rugged steel turnbuckles for adjustable camber and front toe-in
Lightweight front drag tires
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3S LiPo battery packs
Metric hardware throughout
18 precision, rubber-sealed ball bearings
Durable front and rear wide body mounts
2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
Adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Many Factory Team options already available
Specifications:
Scale: 1:10
Power: Electric
Length: 609.6mm (24”)
Width: 272mm (10.70”)
Weight: 1850g (4.08 lbs)
Wheelbase: 322mm (12.68”)
Transmission Ratio: 2.6:1
Includes:
(1) Team Associated DR10 RTR Brushless Drag Race Car Combo
(1) 2.4GHz 2-channel Radio
(1) Reedy 7.4V 2S LiPo Battery with T-plug
(1) Reedy Compact Balance Charger
Needed to Complete:
(4) AA Alkaline batteries used in the transmitter
This product was added to our catalog on July 30, 2021
Team Associated Arm Mount Inserts. These are the replacement inserts for the RC10 B6 and B6D buggies.
Includes Arm Mount Insert
(4) 0, 0
(4) 0, 0.35
(4) 0, 0.7
(4) 0.35, 0.35
(4) 0.7, 0.7
This product was added to our catalog on October 28, 2023
ASC91998, Team Associated RC10B6 Pre-Cut 1/10 Buggy Wing (7" Wide)
The Team Associated RC10B6 Pre-Cut 1/10 7" Wide Buggy Wing offers even more downforce compared to the current 6.5" wing for the B6. With the larger size more downforce and high speed stability is created giving the vehicle faster speeds on sweeping corners and lower grip tracks. Package includes one clear pre-cut 7" wing.
This product was added to our catalog on October 26, 2023
ASC70004, Team Associated RC10T6.4 1/10 Off Road 2WD Stadium Truck Team Kit
Team Associated RC10T6.4 Electric 2WD Team Stadium Truck Kit
Team Associated RC10T6.4 Off Road 1/10 Electric 2WD Stadium Truck Team Kit. Based on the legendary successful RC106.2 Stadium truck with a long list of updated features and designs to bring maximum capabilities, performance and adjustability out of this super versatile competition truck to match and fulfill all racers' needs. The RC10T6.4 shares key components with the RC10SC6.4, RC10B6.4, and RC10B74.2 Team Kits, making it easier than ever to run multiple classes at the same time! With 13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling, updated front ballstud mount and top plate with an angled steering system for improved steering consistency, updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability and updated longer 92.5mm CVA driveshafts that provides more rear grip! In addition, the included B6.4 (-1mm) kingpin offset steering and caster block set provides smoother and more predictable steering through the entire wheel throw, and the B6.4 adjustable height steering bellcrank and rack system provides optimized bump-steer at all ride heights and caster angles. With so many more features, tuning options and upgrades, we can all agree that the RC10T6.4 is an ultimate kit option for all the competitive racers seeking high performance and quality!
**NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Updated Features:
13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
13mm machined shock pistons
Updated front ballstud mount and top plate with an angled steering system for improved steering consistency
Updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability
Updated rear suspension with wider C and D mounts from the RC10B6.4 series
Updated longer 92.5mm CVA driveshafts for more rear grip
7.0mm blue aluminum rear clamping hexes with laser etching
Updated chassis side rails with the RC10B6.4 fan mount system
Updated aluminum chassis length with 22.5 degrees kick-up to complement the updated front-end geometry with updated shape to reduce chassis scrub on the track surface
(20, 22.5 and 25) degrees molded bulkheads are included for a complete range of caster and kick-up options
B6.4 adjustable height steering bellcrank and rack system for optimized bump-steer at all ride heights and caster angles
Includes B6.4 -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
Aluminum RC10B6.4 ESC mounting tray positioned forward in the chassis and a wider footprint to fit electronics, resulting in an increased forward weight bias
Factory Team RC10B6.4 11g aluminum ESC tray
Specifications:
Scale: 1/10
Type: Stadium Truck
Drivetrain: 2WD
Surface: Off-Road
Power Plant: Electric
Completion level: Unassembled
Length: Varies
Width: Varies
Height: Varies
Wheelbase: Varies
Includes:
(1) Team Associated RC10T6.4 Off Road 1/10 Electric 2WD Stadium Truck Team Kit
Needed to Complete:
(1) Steering servo
(1) 2-channel transmitter & receiver
(1) 1:10 scale 540-size electric motor & ESC
(1) 2S LiPo battery
(1) Polycarbonate Stadium Truck body
Paint for polycarbonate body
Wheels & Tires
Assembly Tools & Tires CA glue
This product was added to our catalog on June 19, 2023
ASC70009, Team Associated RC10SC6.4 1/10 Off Road Electric 2WD Short Course Truck Team Kit
Team Associated RC10SC6.4 Electric 2WD SC Team Truck Kit
Team Associated RC10SC6.4 Off Road 1/10 Electric 2WD Short Course Truck Team Kit. Based on the legendary successful RC10SC6.2 Short Course truck with a long list of updated features and designs to bring maximum capabilities, performance and adjustability out of this super versatile competition truck to match and fulfill all racers' needs.
The RC10SC6.4 shares key components with the RC10T6.4, RC10B6.4, and RC10B74.2 Team Kits, making it easier than ever to run multiple classes at the same time! With 13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling, updated front ball stud mount and top plate with an angled steering system for improved steering consistency, updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability and updated longer 92.5mm CVA driveshafts that provides more rear grip! In addition, the included B6.4 (-1mm) kingpin offset steering and caster block set provides smoother and more predictable steering through the entire wheel throw, and the B6.4 adjustable height steering bellcrank and rack system provides optimized bump-steer at all ride heights and caster angles.
With so many more features, tuning options and upgrades, we can all agree that the RC10SC6.4 is the ultimate kit option for all the competitive racers seeking high performance and quality!
NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Updated Features:
13mm big bore threaded aluminum shocks and springs with machined shock pistons for improved bump and jump handling
13mm machined shock pistons
Updated front ballstud mount and top plate with an angled steering system for improved steering consistency
Updated 3.5mm heavy-duty ball cups and turnbuckles for maximum durability
Updated rear suspension with wider C and D mounts from the RC10B6.4 series
Updated longer 92.5mm CVA driveshafts for more rear grip
7.0mm blue aluminum rear clamping hexes with laser etching
Updated chassis side rails with the RC10B6.4 fan mount system
Updated short course truck length aluminum chassis with 22.5 degrees kick-up to complement the updated front-end geometry with updated shape to reduce chassis scrub on the track surface
(20, 22.5 and 25) degrees molded bulkheads are included for a complete range of caster and kick-up options
B6.4 adjustable height steering bellcrank and rack system for optimized bump-steer at all ride heights and caster angles
Includes B6.4 -1mm kingpin offset steering and caster block set for smoother and more predictable steering through the entire wheel throw
Aluminum RC10B6.4 ESC mounting tray positioned forward in the chassis and a wider footprint to fit electronics, resulting in an increased forward weight bias
Factory Team RC10B6.4 11g aluminum ESC tray
Specifications:
Scale: 1/10
Power Plant: Electric
Length: Varies
Width: Varies
Height: Varies
Wheelbase: 325mm (8.86in)
Gear Ratio: 2.6:1
Drivetrain: 2WD
Surface: Off-Road
Completion level: Unassembled
Includes:
(1) Team Associated RC10SC6.4 Off Road 1/10 Electric 2WD Short Course Truck Team Kit
Needed to Complete:
(1) Steering servo
(1) 2-channel transmitter & receiver
(1) 1:10 scale 540-size electric motor & ESC
(1) 2S LiPo battery
(1) Polycarbonate SC Truck body
Paint for polycarbonate body
Wheels & Tires
Assembly Tools & Tires CA glue
This product was added to our catalog on June 19, 2023
ASC20531C, Pro4 SC10 General Tire RTR LiPo Combo
Product Detail
In The Box
(1) Pro4 SC10 General Tire Short Course Truck RTR
(1) #27201 Reedy Compact Balance Charger
(1) #751 Reedy 7.4V 2S LiPo Battery with T-plug
(1) Product Manual
Needed to Complete
(4) AA batteries used in the transmitter
Team Associated DR10 RTR Brushless Drag Race Car w/2.4GHz Radio & DVC
The Team Associated DR10 RTR Brushless Drag Race Car Combo with 2.4GHz Radio, is a complete setup developed for No Prep racing, and built upon the 9-time R.O.A.R. Short Course National Championship platform.
This DR10 Drag Race Car features a water-resistant high-power Reedy brushless speed control and 3300kV brushless motor, a 2.4GHz 2-channel radio system, as well as Team Associated's DVC (Dynamic Vehicle Control) receiver unit with built-in adjustable digital gyro. Add to that a Reedy metal-gear, digital, high-torque servo and a water-resistant enclosed receiver box and you've got an unbeatable street racer.
NOTE: Battery shown in photos is for illustrative purposes only and is not included. See the needed to complete list below for a full list of items required to complete the model.
Features:
Based on the 9-time R.O.A.R. National Champion short-course race truck platform
2.4GHz 2-channel radio with DVC (Dynamic Vehicle Control) receiver featuring built-in adjustable gyro
Three-position wheelie bar with optional large wheels
High-torque, metal-gear Reedy servo with spring style servo saver
Powerful Reedy 3300kV brushless motor
Factory finished two-piece Reakt drag race body with rear spoiler
Water-resistant high-powered Reedy brushless speed control with T-plug connector and Lipo low-voltage cutoff
Aluminum 12mm big bore coil-over shock absorbers
Rear CVA driveshafts for more reliability
Water-resistant enclosed receiver box
Rugged steel turnbuckles for adjustable camber and front toe-in
Lightweight front drag tires
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2/3S LiPo battery packs
Metric hardware throughout
18 precision, rubber-sealed ball bearings
Durable front and rear wide body mounts
2.6:1 ratio gearbox with heavy-duty sealed gear differential and externally adjustable slipper clutch
Adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Many Factory Team options already available
Specifications:
Scale: 1:10
Power: Electric
Length: 609.6mm (24”)
Width: 272mm (10.70”)
Weight: 1850g (4.08 lbs)
Wheelbase: 322mm (12.68”)
Transmission Ratio: 2.6:1
Includes:
(1) Team Associated DR10 RTR Brushless Drag Race Car
(1) 2.4GHz 2-channel Radio
Needed to Complete:
(4) AA Alkaline batteries used in the transmitter
(1) 2s-3s Lipo battery w/ high current t-plug
(1) Battery charger
This product was added to our catalog on May 28, 2021
ASC21563, Team Associated Factory Team Reflex 14B/14T Metal Drive Gear Set
This is an optional Team Associated Factory Team Reflex 14B/14T Metal Drive Gear Set, intended for use with the Reflex 14B 1/14 electric buggy kit.
Includes:
(1) Metal ring gear
(1) Metal pinion gear
This product was added to our catalog on January 29, 2021
ASC30128C, Team Associated Apex2 Nissan Z Sport RTR 1/10 Electric 4WD Touring Car Combo w/2.4GHz Radio, Battery & Charger
Since 1969, Nissan has been rewriting the rules of sports cars. The distinct styling, the relentless thrust of six cylinders pointing that long nose toward the horizon, a responsive suspension and stunning looks, the Nissan Z has captured the hearts of so many devoted sport cars admirers all over the world from different generations. With this Apex2 Nissan Z Sport, Team Associated has magnificently recreated this replica based on the 2023 Nissan Z equipped with the powerful 400-horsepower Twin-Turbo V6 engine for all of us fast sport cars enthusiast's to live and experience the thrill of putting the power to the pavement in 1/10 scale!
Fitted on the proven and popular Apex2 Sport chassis that features front and rear independent suspension, threaded oil-filled shocks, active rear toe, sealed gear differentials and a stout drivetrain, this vehicle packs some potent performance just like the real thing and is ready to lay some rubber down on the pavement in style!
Features:
Officially licensed
A-arm front and rear independent suspension keeps the Apex2 chassis under control during the wildest of driving conditions
Active rear suspension allows the toe to be adjusted through the suspension cycle, increasing or decreasing rear grip
A sealed center driveline keeps dirt and debris out for smooth and reliable power delivery
Reedy 550 15-turn 3-slot motor provides plenty of torque and tire ripping speed
Reedy SC500X programmable brushed ESC (program card sold separately)
Aluminum motor plate
Plastic body shock absorbers smooth out the bumps when cruising around the streets
Sealed receiver box
Steel dog bones and drive axles
Sealed front and rear gear differentials
Injection-molded brake calipers and rotors
Adjustable shock mounting locations
POM-filled injection molded pivot balls
Oilite bushings
Active rear toe suspension design
Molded one-piece tire rods and steering links
Bolt-on steering plates
Adjustable body post height locations
"Shorty" battery box
Specifications:
Scale: 1/10
Type/Terrain: On-Road Touring Car
Power plant: Brushed Electric
Drive Train: Shaft driven 4WD
Motor Size: 550 15T Brushed
Internal Gear Ratio: 2.6:1
Length: 444mm (17.48in)
Width: 190mm (7.48in)
Wheelbase: 259mm (10.2in)
Includes:
(1)Team Associated Apex2 Nissan Z Sport RTR 1/10 Electric 4WD Touring Car
(1) Reedy 2S(7.4V) 3000mAh Shorty WolfPack LiPo
(1) Reedy 324-S Compact Balance Charger
Needed to Complete:
(4) AA batteries for the transmitter
This product was added to our catalog on June 8, 2023
ASC31854, Team Associated Apex2 Suspension Arms
Team Associated Apex2 Suspension Arms. These replacement suspension arms are intended for the front or rear of the Team Associated Apex2. Package includes two front suspension arms and two rear suspension arms.
This product was added to our catalog on March 9, 2022
ASC7662, Team Associated 32P Spur Gear (81T)
Team Associated 32 Pitch Spur Gear. These spur gears are compatible with Team Associated slipper clutch equipped 1/10 off road models, and are available in multiple tooth count options to fine tune torque and top speed.
This product was added to our catalog on OCTOBER 5, 2023
ASC9003132, Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy (Blue) w/2.4GHz Radio & DVC
The Team Associated RB10 RTR 1/10 Electric 2WD Brushless Buggy was engineered using Team Associated's vast knowledge and success in the 1:10 scale 2WD racing category. Since the introduction of the RC10 in 1984, the Team Associated RC10 buggy platform has won 13 of the 18 I.F.M.A.R. World Championships contested since the class began. You now have the chance to drive a buggy derived from this race-winning heritage with the beginner-friendly, capable and powerful RB10.
The RB10 buggy roars to life with a water-resistant high-power Reedy brushless speed control, 3300kV brushless motor, a 2.4GHz 2-channel radio system and the Drive Vehicle Control (DVR) receiver with a built in gyro. The DVR system is able to be tuned to different settings that will allow for more or less gyro control. The RB10 is equipped with the Reedy metal-gear, digital high-torque servo, and a water-resistant enclosed receiver box. All of this sits under the outstanding factory-finished off-road buggy body with wing. The RB10 will keep you accelerating and cornering with the included aggressive off-road treaded tires and lightweight 12mm hex wheels.
The RB10 will perform on most surfaces you throw it at, from asphalt to dirt as well as any prepared track surfaces. This buggy makes for a great basher and a good platform to try your skills out on the track.
NOTE: Battery shown in photos is for illustrative purposes only and is not included.
Features:
2.4GHz 2-channel radio with a DVC (Dynamic Vehicle Control) receiver featuring a built-in adjustable gyro
High-torque, metal-gear Reedy servo with spring style servo saver
Powerful Reedy 3300kV brushless motor
Water-resistant, high-power Reedy brushless speed control with T-plug connector and LiPo low voltage cutoff
Water-resistant, enclosed receiver box
Factory-finished off-road buggy body and wing, with two color schemes to choose from (blue and red)
Off-road buggy race car-inspired dish wheels
High-grip, off-road tires with aggressive tread pattern
Aluminum 12mm big bore coil-over shock absorbers
Durable and lightweight aluminum top shaft
Low center-of-gravity molded composite chassis with hook-and-loop battery straps that accommodate both NiMH and 2S and 3S LiPo battery packs
Rear CVA driveshafts for more durability
2.6:1 ratio gearbox with heavy-duty sealed gear differential and extremely adjustable slipper clutch
Rugged steel turnbuckles for adjustable camber and front toe-in
Adjustable suspension geometry
Vertical ball ends for roll center adjustments, front and rear
Metric hardware throughout
22 precision rubber-sealed ball bearings
Many Factory Team options already available!
Specifications:
Scale: 1:10
Power Source: Electric
Terrain: Off-Road
Body Style: Buggy
Assembly Level: Assembled
Power: Electric
Length: 400mm (15.75”)
Width: 248mm (9.76”)Wheelbase: 277.8mm (10.94")
Wheelbase: 277.8mm (10.94")
Weight: 1405g (3.1lb)
Drive: 2WD
Transmission Ratio: 2.6:1
Includes:
(1) Team Associated RB10 RTR 2WD Buggy
(1) 2.4GHz 2-channel Radio
Needed to Complete:
(1) Battery Pack with T-Style Connector
(1) Charger (Compatible with battery)
(4) AA Batteries for Transmitter
This product was added to our catalog on October 11, 2021