TRA6608, Traxxas LaTrax Alias Ready-To-Fly Micro Electric Quadcopter Drone This is the LaTrax Alias Ready-To-Fly Micro Electric Quad-Copteris a clean-sheet design that focuses on the performance and design elements that make flying, and even learning to fly, fun. The first mission objective was durability. Alias is built around a unique molded-composite frame that is combined with clever high-tech construction to make it extremely light and virtually indestructible. Your flying fun goes on and on without worrying about breakage from crash damage. The next mission was performance. Fun always comes from having more power so Alias' motors have 50% more power than standard motors, and when combined with the lightweight design and high-tech materials, Alias is lightning quick and ultra-responsive. A completely redesigned flight control system was developed that provides unmatched 6-axis stability that works in the background without impacting performance and speed. It acts like a virtual spring that snaps Alias back to level controlled flight no matter what situation you find yourself in. New pilots can fly faster and perform aerobatic maneuvers sooner than they ever thought possible with Alias' unique flight control system. Alias Quad-Copter Features: Quad-rotor thrust with auto-leveling 6-axis flight system Three customizable flight modes: Easy, Fast, Expert Easy Mode – Auto-leveling with limited flight angle Fast Mode – Auto-leveling with more aggressive flight angles and one-button flips, rolls, and twists Expert Mode – Disables auto-leveling, fully adjustable rates, perform manual maneuvers, and one-button auto-leveling recovery Crash-proof, virtually indestructible design! Integrated high-intensity LED optics light the way for increased night visibility Four high-output motors – 50% more power than standard motors Colorful and interchangeable rotor blades, LED lenses, and canopies 2.4GHz multi-mode transmitter eliminates frequency conflicts Telemetry-enabled battery fuel gauge Exciting push-button aerobatics in Fast Mode Perform one-button 3D flips, rolls, and twists Includes a high-capacity 650mAh LiPo battery for long flight times USB-powered, high-output fast battery charger Soft-compound rubber feet Top-mounted drivetrain Molded two-piece, two-color canopy 100% fully assembled and Ready-To-Fly 2.4GHz Transmitter Features: Reliable 2.4GHz control Low battery indicators for transmitter and helicopter receiver Electronic trim controls Digital trim indicators Internal antenna LCD display keeps you informed Interchangeable control sticks and thumb pads Traxxas Link model memory stores up to 10 models Powered by Traxxas  Specifications:  Blade Circle: 14.78" (375.30mm)  Rotor Diameter: 5.51" (140.00mm)  Rotor Center Distance Diagonal: 9.25" (235.00mm)  Rotor Hub Distance Vertical: 6.54" (166.20mm)  Width: 12.07" (306.50mm)  Overall Height: 1.69" (42.90mm)  Ground Clearance: 0.47" (11.90mm)  Overall Flight Weight (with Battery): 3.53 oz (100g)  Flight System: Auto-Leveling Six-Axis  Radio System: 2.4GHz 6-channel Multi-mode  Main Frame Structure/Material: Molded Composite  Gear Ratio: 11:78  Battery Type: Lithium Polymer (LiPo)  Battery Voltage: 3.7V  Battery Capacity: 650mAh  Battery Discharge Rating: 20C  Battery Charger Rate: 1000mA (high), 500mA (low)  Flight Time: Up to 15 Minutes  Motor Type: Brushed, Coreless Includes: 650mAh LiPo Battery Pack USB-powered LiPo Charger 1.5mm Hex Wrench (4) Traxxas "AAA" Alkaline Batteries Spare Rotor Blade Set Spare Hardware Thumb Sticks This product was added to our catalog on April 18, 2021

Read more less

All batteries must be shipped by a ground shipping method. The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles. It's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor. Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 450mAh - BT2.0 Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features The auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV. Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train. With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight. Made of PA12 material, the frame has an excellent impact resistance in drop & impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors. All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry. Specifications BetaFPV LiteRadio 2 Frequency Range: 2.4GHz (2403MHz-2447MHz) 2.4G System: NRF24L01 or CC2500 Channel: 8 Support Protocol: Bayang / Futaba S-FHSS / Frsky D16 FCC/ Frsky D16 LBT/ Frsky D8 Power: ≤100mw Adapted Drone Type: Multirotor Support USB Charging / Firmware Update Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration LED Light: Green-Power On / Red-Warning / Blue-Normal Battery: Built-in 1000mAh 1S Battery Charging Connector: Type-C BetaFPV VR02 Goggles Screen Size: 4.3" Screen Resolution: 800x480p Screen Brightness: 300cd/m2 Field of View: 55° Charging Port: USB-C Input Voltage: 3.7V 500mA Internal Battery: 3.7V 2000mAH Dimensions: 143x126x86.3mm Weight: 300g BetaFPV RTF Cetus Pro Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 VTX: 25mW Camera tilt degree: 25° Camera: C02 FPV Micro Camera Propeller: 40mm 3-blade 1.5mm shaft hole Power system: 1S Battery: BT2.0 450mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (Clear line of site) Includes 1x Cetus Pro Brushless Quadcopter                              1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)                         1x VR02 FPV Goggles    2x BT2.0 450mAh 1S Lipo Battery      1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C Adapter 1x Prop Removal Tool 1x Portable Storage Bag

Read more less

Introducing the smallest HD whoop with the DJI O3 currently on the market. This amazing 75mm quadcopter comes with the elite DJI O3 Air Unit and O3 Micro Cam, and the new BeeBrain BLV4 HD F7 AIO flight controller. Achieve sharper HD capture with amazing quality with O3 Air Unit. Boasting powerful 0804 12000kv dual ball bearings motors, despite its small size, this thing will rip!  Check out our other pre-built quads, as well as the rest of our NewBeeDrone selection. Explore and film spaces you never could before in HD! A must-have tool for professionals and hobbyists specializing in indoor space. The only HD Micro whoop board with F7 processor. Dual-bearing motors allow less friction in spinning while 3-blade Azi propellors were developed with engineering theory for optimal air-grab and stability. We master-tuned this drone to have the smoovest flight and absolutely no jello in any videos.  We found the best ratio between the size of drone and its weight distribution. Without DJI O3, the drone can fly up to 8 minutes. Up to 3 minutes with DJI O3 and battery. Choose between 3D printed battery mounts or strap.   We ensure that you get the best material and components  that are available so you can rely on the drone without troubleshooting or breaking. All parts are available separately as replacements. Additional flexibility with SLS Nylon prints allow cameras to be changed or updated if needed.  Assembly or tuning not required. Save time and energy so you can focus on your footage. Drone comes with built-in ExpressLRS and ready to pair. Built-in blackbox records data for tuning. Configure to DJI PNP on Betaflight if needed. Don't be afraid of messing up on customization. Reset to factory default (with our tunes and dump files) in one click if something is not right. Specifications  Drone Size: 75mm Flight Controller: BeeBrain BLV4 HD F7 Flight Controller ExpressLRS (ELRS) 2.4G Frame: Cockroach75 Brushless Frame Motors: Flow 0804 12000kv Double Ball Bearing Brushless Motor Propellesr: Azi (Tri-Blade) Micro Propellers 40mm - 1.0mm Shaft HD VTX & Camera: DJI O3 Air Unit Canopy: NewBeeDrone Acrobee75 HD O3 Canopy Total Weight without battery: 70.19g Total Weight with battery: 98.24g BeeBrain BLV4 HD F7 Flight Controller ELRS2.4G Specifications: MCU: STM32F745 ESC Firmware: S-H-40 - Bluejay, 0.19.2, 48kHz. ESC Specifications: 4 channel 12A ESC ESC Connector: JST-1.0 3Pin Weight: 6.6 grams (including antennas and battery connector) Size: Outer dimensions 29 x 29 x 7.6 mm Holes: 25.5 x 25.5 mm Battery input: 2S Connector: XT30 Internal Blackbox: 16MB Gyro: BMI270 UART1: SBUS on DJI Connector (RX only) UART2: TX & RX for internal ExpressLRS 3.0 receiver UART3: TX & RX for DJI MSP+Displayport Flight time with Tattu 450mAh 2S battery is 3:00min (at 7v)  Firmware:  BeeBrain BLV4 HD Betaflight 4.4.0 firmware with tune Includes 1x NewBeeDrone BNF AcroBee75 BLV4 2S HD 75mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz

Read more less

NewBeeDrone's latest whoop, the AcroBee BLV4 is perfect for flying indoors and outdoors. The technology and level of detail built into this whoop are astounding! With new "Smart Max" technology, uses the MCU to read the board temperature on the back of the VTX chips and uses PID control to control the output power for the VTX amplifier. If the temperature is low enough, the PID will adjust the output power higher, a maximum of 400Mw, and if the temperature rises, the output power of the VTX is lowered to avoid overheating.  With the VTX power, combined with ELRS, this whoop will fly far. Check out our other pre-built quads, as well as the rest of our NewBeeDrone selection. Features Classic Design with a newly refreshed appearance New Flow 0802 19000Kv Motors On-board temperature regulation prevents damage to boards. Built-in ELRS receiver Specifications Flight Controller: BeeBrain BLv4 ELRS MCU: STM32F411 VTX: Switchable output power from 5mw- 25mw(for Racing) - SmartMAX (SmartMax up to 400mw) with BeeTX 5.8Ghz Antenna ESC: 12A BLHeliS Pre-Flash with Bluejay 0.16 target: S-H-40 48kHz ESC Connector: JST-1.0 3Pin OSD: NBD7456 Graphical OSD compatible with Betaflight OSD Receiver: ELRS2.4 Diversity receiver (ESP32 compatible with wifi&bluetooth firmware update) 2.4G T-Antenna (Top) & normal 2.4G antenna (bottom) Flight Controller Weight: 6.5g (Include antennas and battery connector) Flight Controller Size: Outer dimensions: 29x29x7.6mm Flight Controller Holes: 25.5x25.5mm Battery input: 1-2S Uart2: Tx & Rx for ExpressLRS2.4G Receiver Uart1: Tx & Rx free Power Connector: NBD-PH2.0 connector Motors: Flow 0802 19000kv Frame: Cockroach65 Brushless Frame Clear Purple Camera Mount: Goober Canopy Clear Purple Propeller: Azi Tri-blade 31mm 1.0 Clear Purple Firmware: 1. BeeBrain blv4 ELRS3.0 receiver firmware 2. BeeBrain blv4 ELRS2.0 receiver firmware All firmware can be found on their Github Page Includes 1x NewBeeDrone BNF AcroBee65 BLV4 Brushless Whoop - ELRS 2.4GHz  

Read more less

All items with batteries must be shipped by a ground shipping method. The TinyHawk 2 RTF kit has everything you need to enjoy micro flight, all packed into a handy carrying case! This is truly the ideal way to try out FPV!  2 batteries are included (a 1S and a 2S), but if you want to maximize your air time, we recommend picking up a few of the following RDQ Series LiPos: 1S 450mAh - PH2.0 2S 300mAh - PH2.0 Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!   Specifications Frame Wheelbase: 75mm Dry Weight: 31.2g All Up Weight: 43.5g with 1x 450mAh 1S battery Frame Material: Polypropylene  Motors Stator Size: 0802 Kv: 16000kv Propeller Mount: Push-On Avan TH-style Propeller: Avan Turtlemode 4-Blade All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) Battery Connector: JST-PH2.0 FPV System VTX Power: 25/100/200mw Switchable Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk II FPV Racing Drone 1x EMAX Transporter 5.8G FPV Goggles 1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging 1x EMAX E6 Transmitter 1x EMAX 450mAh 1S HV Battery 1x EMAX 300mAh 2S HV Battery 2x CCW + 2x CW Spare Props 1x 1S-2S USB LiPo Charger 1x Screwdriver + Hardware Kit 1x Micro USB Charging Cable 1x Faux Carbon Fiber Carrying Case

Read more less

All batteries must be shipped by a ground shipping method. Cetus X Brushless Quadcopter is a 2S power whoop drone and a primary choice for beginners who want to get advanced flight skills. It features a stronger propulsion system for a speedier and more violent flight, which is capable of performing diverse freestyle tricks. Equipped with M04 400mW VTX and C04 FPV camera that is optimized for longer radio and video transmission. Meanwhile, it supports the Betaflight configurator which is a popular application to configure RC aircraft. Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features An excellent preference for beginners to get advanced level. Cetus X brushless Quadcopter is proud of its lightning speed with rapid startup due to its stronger propulsion system. Build-in ExpressLRS 2.4G receiver that is the most popular radio link, low latency, and far controlling range are possible. Pilots can not only enjoy the flight indoors but also explore the scenery outdoor. Featuring M04 400mW VTX, C04 FPV camera (based on Caddx Nano Ant Camera or Runcam Nano 4), and 2xBT2.0 450mAh 1S 30C battery for longer radio and video transmission and flight endurance, Cetus X brushless quadcopter allows beginners to gain more achievements in FPV flight. Classical white design inherited from Cetus Series and made of PA12 material, Cetus X frame has an excellent impact resistance in drop & impact. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. Specifications Item: Cetus X Brushless Quadcopter Weight: 55g Wheelbase: 95mm FC: F4 1S 12A FC V2.2 (ELRS 2.4G) Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G VTX: M04 25-400mW VTX Battery: 2*BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Downloads FC Firmware and ESC download   Includes 1 x Cetus X Brushless Quadcopter 1 x BT2.0 Battery Charger and Voltage Tester 2 x BT2.0 450mAh 1S 30C Battery 1 x Phillips Screwdriver 1 x Prop Removal Tool 1 x Type-C Adapter 4 x Gemfan 2020 4-Blades Props  

Read more less

CineApe25 is DarwinFPV’s first cinematic whoop FPV drone. The frame is composed of upper and lower carbon plates and a high-strength injection guard, which is very strong and crash-resistant, and easy to disassemble. The motor adopts a 1504-3600KV long-life motor; we abandoned the traditional AIO solution and adopted the split design of the F4, 30A stack to reduce the maintenance cost in the future. The accessories adopt mature and stable solutions to maximize the durability and reliability of the drone. Be sure to check out our Cinewhoop Collection as well as all DarwinFPV products we have for sale at RaceDayQuads! CineApe25 is a very cost-effective whoop FPV drone. It not only solves the worries of beginners about the high-risk factors and high threshold of assembly but also improves the after-sales experience. If you are still struggling with which FPV drone to buy, DarwinFPV CineApe25 may be your best choice! Features Comes with high-strength one-piece injection-molded propeller guard, which has higher safety, and a stronger and more durable frame, also reduces the probability of risk, so you have more confidence to fly. The new ducted aerodynamic design greatly optimizes power efficiency, and with the 1504-3600KV long-endurance motor, the CineApe 25 has a battery life of up to 9mins. Compared with traditional stacks, we have treated the CineApe 25 stack with glue to protect it, which greatly reduces the risk of damage to the stack due to contact with metal particles, fine sand and gravel, weeds or dewdrops, etc. The external Type-C parameter adjustment port is convenient for parameter adjustment. It comes with quick-release design only needs to remove 7 screws to separate the top plate and the injection molding guard, which can easily deal with the scene in which accessories need to be replaced urgently. The stack has built-in barometer and SD card slot, and reserves rich interfaces resource, which is facilitate upgrade and DIY in the future. There are optional versions and HD VTX solutions can be provided. Specifications Brand: DarwinFPV Model: CineApe 25 Cinematic FPV Drone Frame Structure: True-X Wheelbase: 112mm Dimension: 160x160x43mm Motor: 1504-3600KV Propeller: HQProp T63MMX6 Recommend Battery: LiPo 4S 850mAh Hovering Time: 9mins (4S 850mAh Battery) Weight: 144g (Without Battery) Flight Controller: F411 MPU6500 AT7456E Reserved Connector: 1x SBUS (RX1 inverter), 2x Uarts 2x Softserial, 1x I2C, 1x RGB, 1x Buzzer, 1x USER (A15), 1x USB ESC: BlueJay 3-4S 30A Analog Version: CADDX ANT Analog CAM + 600mW Analog VTX Includes 1x CineApe 25 Cinematic FPV Drone 4x HQProp T63MMX6 propeller (2L2R) 2x battery strap 10x170mm 1x EVA crashproof foam 1x EVA bottom plate shock-absorbing pad 1x Spare Screw Kit 1x Sticker 1x Manual  

Read more less

Pre-Orders shipping ASAP! For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer. DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ. BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h.  The 6S version comes with powerful 1504-2300Kv motors, and choose between PNP (No RX)  or ELRS 2.4GHz for your receiver! Check out our other pre-built quads, as well as the rest of our DarwinFPV selection!  Features Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high cost performance； It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster; The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable; The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash; The independent action camera base can be used with naked gopro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.   Specifications Brand: DarwinFPV Model: BabyApe Ⅱ 6S Frame: Wide X Wheelbase: 156mm Size: 126mmx150mmx50mm Flight Control: F411 MPU6500 AT7456E Firmware： DARWINF411 Firmware: BETAFPV_Nano_2400_RX The receiver's factory firmware is ELRS_V3.2.0 Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB ESC: Bluejay 48KHz 3-6S 30A Motor： 6S version：1504-2300KV Propeller: HQProp T3.5x2x3GR-PC Weight: 135.4 g(analog version) Receiver: ELRS 2.4GHz Darwin FPV "Cement" Ultra Durable FPV Drone Camera Sensor type：1/3" CMOS Sensor Image：16:9 TV System: NTSC Horizontal Resolution：1200TVL Lens：2.1mm 160° Electronic Shutter: 1/50~1/100000 sec Video Output: CVBS Min. Illumination：0.001Lux wb: automatic DNR: 3D DNR WDR: 100db Input voltage: DC 3.7-24V Working current：80mA@DC12V/170mA@DC5V IP: IP67 Size：19x19mm Weight：7.9g DarwinFPV 25/200/400/600mW VTX Output Power: 25/200/400/600mW(adjustable) Frequency: 5.8Hz 40port Power Supply Voltage Range: 5V Weight: 3.5g Pitch: 28x15mm(length x width) Protocol: SmartAudio Indicator Light Description: Includes 1x DarwinFPV BNF Baby Ape V2 3.5" Analog Quad - 6S - Choose Your Receiver 4x HQProp T3.5x2x3GR-PC 2x Battery cable strip ( 10x170mm) 2x EVA shock pad（thickness：10㎜） 1x Spare screws bag 1x Sticker 1x Manual

Read more less

The props for this BNF press fit on and do not screw into the motor (much like many other Whoops & Toothpicks) The only difference between the Baby Ape and Baby Ape Pro versions is the camera. Darwin FPV is coming in hot with this affordable new 3" quad. Finding a good quad at a decent price is almost impossible these days but DarwinFPV has done it with this little ripper! Make sure to check out all of our BNF quads as well as the rest of our DarwinFPV selection! Specifications Motors Input Voltage: 1-3S Stator Size: 11x4mm KV: 4300 AIO MCU: STM32F411 Gyro: MPU6000 BEC: 5V/2A,3.3V Input voltage: 1-3S Lipo Support Receiver: PPM, Ibus, Sbus, Dsmx Black box: NO Barometer: NO Firmware: MATEKF411 Buzzer interface: YES Betaflight OSD: AT7456E Constant current: 15A Peak current: 17A MCU: EFM8BB21F16G(48MHz) Firmware: BLHeli_S Protocol: Dshot600 Mounting: 25.5X25.5 M2 VTX Input Voltage: 7V~24V RF Output Power: 0mW/25mW/100mW/200mW switchable Antenna Connector: U.FL Baby Ape Camera Model: Darwin205 Resolution: 700TVL Lens: 1.8mm Signal System: PAL/NTSC Baby Ape Pro Camera Model: Caddx Ant Image Sensor: 1/3" CMOS Resolution: 1200TVL Signal System: PAL/NTSC Includes 1x DarwinFPV PNP Baby Ape 3" Quad - Plug-N-Play Choose Version

Read more less

Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo. Experience the elite capabilities of HD Walksnail System. Check out our other pre-built quads, as well as other great products from Flywoo! Features Redesigned canopy with enhanced aesthetics and reinforced camera protection. The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter. Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability. The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance.  A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector. New battery compartment design allows for easy replacement of batteries of different models. Dead Cat Style The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers. New Design Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter. Efficient Power Combo Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability. Ultra-light AIO with ELRS 2.4G RX The drone's GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance. This allows for the ultimate lightweight design without sacrificing functionality. HD Digital VTX System The Walksnail Avatar HD Mini 1S Lite is a lightweight VTX designed for 1S whoop drones, featuring H.265 high-efficiency video coding technology, 1080P/60FPS image recording with 22ms ultra-low latency, and built-in 8 GB storage for interference-free HD video recording and USB exporting. More Power, More Flight Time The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed.  Specifications Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit Motor: ROBO 1002 19800KV Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0 Propeller: 1608-3 Blade 40mm 1.5mm Shaft Camera: Avatar Lite Cam Weight: 33g GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller MCU: STM32F411CEU6  GYRO: ICM42688 UARTS: 1/2 Soft serial port: 1 I2C: SCL/SDA BEC: 5V  Input Voltage: 1S (<4.35v) Firmware: FLYWOOF411_5IN1_AIO  Mounting:  25x25mm, M2 Onboard 4in1 ESC MCU: EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A Firmware: BLHeli_S Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT 150/300/600 ELRS 2.4G RX (UART2) ROBO 1002 19800KV Configuration: 9N12P Stator Diamter: 10mm Stator Length: 2mm Shaft Diameter: 1.5mm Motor Dimension(Dia.xLen): Φ13.5x7.75mm Weight(g): 2.5(5cm wire) Idle current(5)@5V(A): 1.3 No.of Cells(Lipo): 1S Max Continuous Power(W)3S: 44 Internal Resistance: 89mΩ Max Current(3S): 11.8A Max Efficiency Current: (2-4A)>84% Walksnail Avatar HD Mini 1S Lite Model: Avatar mini 1s module Communication Frequency: 5.725-5.850GHz Transmitter Power (EIRP): FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm I/O Interface: JST1.0x6(Power in)JST1.0x4(USB) Mounting Holes: 25.5x25.5mm Dimensions: 30x30x6.5mm Storage: 8G Recording: 1080p/720p Weight: 5.1g Operating Temperature: -20-40℃ Channels: 8 Wide Power Input: 3.1V-5V Supported FC System: Betaflight OSD: Canvas mode Bitrate: 25mbps, 50mbps Latency Average delay: 22ms Antenna: IPEX Avatar lite camera Model: Avatar lite camera Image Sensor: 1/2.7”1nch Resolution: 1080P/60fps,720P/120fps,720P/60fps Ratio: 16/9 4/3 Lens:2.1mm FOV:170° Aperture:F2.0 Shutter Rolling: Rolling shutter Min.Illumination: 0.001Lux Weight: 1.8g Dimensions: 14x14x16mm Includes 1x Flywoo BNF Firefly DC16 Nano Baby V2.0 HD 1S 1.6" Deadcat Micro Quad w/ Walksnail Avatar Mini 1S Lite & Avatar Lite Cam - ELRS 2.4 GHz 4x 1608 -3 40mm 1.5mm shaft 2x TPU battery mount 1x hardware screws set 4x Prop guards

Read more less

Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card. The CineRace is a double duct design, not a simple guard anymore. It can fly as flexibly as a racing drone, and as stable as Cinewhoop. All in all, this is a  drone that can not only race but also capture stable videos and at the same time achieve a super long flight time! A specially designed GM10 Nano V3 GPS module is tailored to fit the CineRace20, providing minimal weight but the ability to search up to 30 satellites. You will see on the front of the quad Flywoo engineer the use of the soft TPU material to mount the camera to prevent the jello effect, by reducing the over all vibrations in the quad. Come see our  Cinewhoop Collection and other great products from Flywoo! We also carry a version with the O3 Air Unit already installed here. Features Almost all parts are injection molded for a more sturdy and durable quad. Very easy to disassemble, only fixed by two aluminum columns Customizable with LEDs GPS up to 30 satellites Innovative duct design Sub250 (even with battery) Specifications Input Voltage: 4S Model: CineRace20 HD DJI O3 2inch (without Air Unit) Brand: FLYWOO Frame: CineRace20 O3 (Different fromCineRace20 V1.2\V2 frame ) Charge connector: XT30 Motor: NIN V2 1203PRO 4850Kv Propeller: D51-5 51mm  Buzzer : 5PCS Active Alarm Buzzer GPS: GOKU GM10 Nano V3 GPS Weight: 139g (without battery) Betaflight Firmware target: FLWO/FLYWOOF405S_AIO(SMT32F405) Recommended Battery:Explorer 450mah 4S ( flight time  5mins ) Explorer 750mah 4S ( flight time  6mins )  GOKU GN F405S 20A AIO Input Voltage: 2-6S Lipo MCU: STM32F405 BGA IMU: ICM42688 OSD: BetaFlight OSD  Blackbox: 16Mb Flash Baro: BMP280 BEC: 5V 6 hardware UARTS (UART1,2,3,4,5,6) Onboard LED：4x WS2812 Support BLHELI_S Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 FPV System Add your own O3 Air Unit Includes 1 x Flywoo CineRace20 HD V2 Neon LED 4S Cinewhoop (without O3 Unit) - PNP 8 x D51-5 props 2 x Battery strap  9x150mm \ 9x200mm 1 x Set of screws 1 x 90° USB Type-C 

Read more less

All batteries must be shipped by a ground shipping method. Introducing iFlight's Defender 25, a sub-250 drone featuring the DJI O3 Air Unit. At 249g weight, Defender 25 doesn't require registration in most countries. The compact and lightweight design also make it easy to carry and store. It will be your best travel buddy to redefine your FPV adventure. The built-in 2.5-inch propeller guards were designed to fly boldly. You’ll experience a completely new creative freedom to fly whenever and wherever. The durable injection molded frame not only prevents damage to your motors or propellers but also protects the environment from small flight errors. Equipped with the latest tech from DJI, the O3 Air Unit HD transmission system, the Defender 25 supports 4K video and shoots up to 155° super-wide FOV footage for stunning visuals. In addition, D-Cinelike color mode provides more creative freedom for color grading, allowing you to edit and adjust your footage.  They’ve also added a special vibration-damped camera mount to keep your raw footage as smooth as possible, as well as ensure good Gyro Data for the built-in or in-post camera stabilization. Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products! Features Optimized Landing Gear for Take-Off in Complex Environments Built-in High-Performance video and Receiver Antennas 4K Stabilized Video with 155° Ultra-Wide Angle Crash-Protected Quick-Release Battery Countless Easy-to-Use Features Ultralight and Free to Fly Small and Mighty Specifications Defender 25 Product Name: Defender 25 4S HD Flight Electronics: BLITZ D25 F7 AIO Video Transmission: DJI O3 Air Unit Frame: 112±2mm Motor: Defender25 1404 Prop: Defender25 2525 props (2.5-inch) Weight of the Aircraft: 180g Takeoff Weight incl. 550mAh battery: ≤249g Dimensions (L×W×H)：158x155x69mm Max Ascent Speed: 6 m/s (Normal Mode, Sport Mode) Max Descent Speed: 6 m/s (Normal Mode, Sport Mode) Max Speed: 100Km/H (Manual Mode) Maximum Takeoff Altitude: 200 m Max Hover Time: Approx. 6 mins (with 550mAh battery), 10mins (with 900mAh battery) Max Flight Distance: 2-3 km Max Wind Speed Resistance: 80 Km/H (Level 5) Operating Temperature Range: -10° to 40° C (14° to 104° F) Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm Antennas: Dual Antennas GNSS: N/A Video Transmission Product Name: DJI O3 Air Unit Weight: Approx. 36.4grams Dimensions (L×W×H): L16.7×W103.9×H 81.3mm Screen Size (single screen): 0.49-inch Resolution (single screen): 1920×1080 Refresh Rate: Up to 100 Hz Interpupillary Distance Range: 56-72 mm Diopter Adjustment Range: -8.0 D to +2.0 D FOV (single screen): 51° Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz Transmission Power (EIRP): 2.4 GHz: < 30 dBm (FCC), < 20 dBm (CE/SRRC/KC) 5.8 GHz [4]: < 30 dBm (FCC), < 23 dBm (SRRC), < 14 dBm (CE/KC) Max Video Transmission Bitrate: 50 Mbps Operating Temperature Range: 0° to 40° C (32° to 104° F) Power Input: 7-9 V (1.5 A) Recommended (Not Included) iFlight Defender 25 Battery - 900mAh Includes 1x iFlight BNF Defender 25 HD 4S 2.5" Cinewhoop w/ DJI O3 Air Unit and DJI Camera (Pre-Built, Tuned, and Tested) 1x Defender 25 550mAh Battery 1x Charging Adapter Board 2x Defender 25 2525 Props (pairs)

Read more less

From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at RaceDayQuads present you the Flywoo Explorer LR HD. Small, long-range, lightweight, and a DJI O3 FPV Air Unit, now that is a recipe for fun. This quad features the GOKU Versatile F405 Pro Mini Stack, NIN 1404 V2 2750KV Motors, and V3.0 GPS. Want a guide for this drone, well here you go: Drone Guide Check out our other DJI O3 Compatible Quads, and also see our other great products from Flywoo! Features Long-range capabilities up to 10KM (FCC) Newest GOKU MINI GPS V3 for Explorer O3 GPS search up to 30 satellites Plug&Play plug O3 Air unit. Hence there is no need to solder 4K/60fps recording for high-quality footage Latest GOKU MINI GPS V3 for greater accuracy Compact and lightweight design, weighing less than 250g even with the battery Long flight time of up to 30 minutes User-friendly controls for easy operation DJI O3 FPV AIR UNITThe DJI O3 Air Unit integrates DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!GOKU GM10 MINI GPS V3.0The V3.0 GPS allows for up to 30 satellites to be searched, making the rescue function more reliable. Safeguard your cruise flight with a built-in buzzer and up to 5 hours of standby.PRE-TUNED AND PRE-SETUPThis RTF is fully built and test-flown by build technicians at Flywoo.   Specifications FC and ESC : Goku Versatile F405 Pro Mini Stack - F405 FC + 40A ESC Frame: Explorer LR 4 03 (Different from OG Explorer LR frame) Model: Explorer LR 4 HD DJI 03 Propellers: Gemfan 4024 2-Blade Motors: NIN 1404 V2 2750Kv Antenna: DJI 03 antenna VTX: DJI 03 Air Unit Wheelbase: 168mm Camera: DJI 03 Brand: FLYWOO Weight: 168.4g GOKU GN F405 Pro Mini 40A 20x20 Stack GOKU Versatile F405 PRO FC Input Voltage: 2-6S Lipo MCU: STM32F405BGA GYRO: ICM42688P UARTS: 1/2/3/4/5/6 I2C: SCL/SDA Barometer: BMP280 BEC: 5V 2A / 10V 2A Blackbox: 16M Input Voltage: 2-6S Firmware: FLYWOOF405PRO Mounting: 20x20mm M3 / 30x30mm M4 ESC Soft: Dshot300/600 ESC Telemetry: Yes LED Controller: BF LED F.Port: Yes RSSI: Yes Buzz: Yes Input: 2~6S Lipo (8.4~25.2V) TVS Protection: Yes GOKU 406S 8bit 40A ESC Con. Current: 40A Burst Current: 45A Input Voltage: 2-6S Support DShot300/600 Current Sensor: YES BEC Output: NO Size: 42×42×4mm Mounting Hole: 20x20mm ( M3) FPV System VTX: DJI O3 Air Unit (Requires DJI Goggles 2 or DJI FPV Goggles V2) Channels: : Auto mode support Manual mode support: 40 MHz: 1 channel; 20MHz: 3 channels; 10MHz: 3channels Camera: DJI O3 Air Unit Camera VTX Antenna: DJI O3 Air Unit Antenna Includes 1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ DJI O3 Air Unit - ELRS 2x Gemfan 4024-2 Black Propellers (Set of 4) 2x Battery Strap 15x180mm 1x Hardware Set

Read more less

The FR16 Nano Baby V2 is an advanced microdrone with improved flight time, power, and appearance over its predecessor. It's 30% more powerful despite being heavier, with flexible flight, great maneuverability, and higher speeds. A newly designed canopy and plate provide crash resistance, and it's equipped with a ROBO 1002 23500KV motor. Plus, the GOKU Versatile F411 ELRS 1S AIO V2 + ELRS 2.4G receiver ensures a lightweight, top-performing design. This version utilizes the elite capabilities of the Walksnail HD digital VTX system.  The Walksnail Avatar HD Mini 1S Lite is a lightweight VTX designed for 1S whoop drones, featuring H.265 high-efficiency video coding technology, 1080P/60FPS image recording with 22ms ultra-low latency, and built-in 8 GB storage for interference-free HD video recording and USB exporting. Check out our other pre-built quads, as well as other great products from Flywoo! Features Redesigned canopy with enhanced aesthetics and reinforced camera protection. The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter. Equipped with ROBO 1002 23,500KV motor and 1609 4-bladed 40mm propellers, delivers a 30% increase in power, flexible flight, and impressive speeds perfect for racing competitions. The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance.  A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector. New battery compartment design allows for easy replacement of batteries of different models. Specification Motor:  ROBO 1002 23500KV Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0 Props:  1609 - 4 blade 40mm 1.5mm Shaft HD Digital VTX System:  Walksnail Avatar HD Mini 1S Lite Receiver:  ExpressLRS 2.4GHz Weight:  33g Flight Time:  Explorer 1S 450mAh HV V2: 4m - Explorer 1S 750mAh HV V2: 6m (approximate) Speed:  70km/h (approximate) GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller MCU: STM32F411CEU6  GYRO: ICM42688 UARTS: 1/2 Soft serial port: 1 I2C: SCL/SDA BEC: 5V  Input Voltage: 1S (<4.35v) Firmware: FLYWOOF411_5IN1_AIO  Mounting:  25x25mm, M2 Onboard 4in1 ESC MCU: EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A  Firmware: BLHeli_S Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT 150/300/600 ELRS 2.4G RX (UART2) Flywoo ROBO 1002 23500KV Fpv Motor: Configuration: 9N12P Stator Diameter: 10mm Stator Length: 2mm Shaft Diameter: 1.5mm Motor Dimension(Dia.xLen): Φ13.5x7.75mm Weight(g): 2.5(5cm wire) Idle current(5)@5V(A): 1.5 No.of Cells(Lipo): 1S Max Continuous Power(W)3S: 52 Internal Resistance: 75mΩ Max Current(3S): 14A Max Efficiency Current: (2-4A)>84% Walksnail Avatar HD Mini 1S Lite Model: Avatar mini 1s module Communication Frequency: 5.725-5.850GHz Transmitter Power (EIRP): FCC:<25.5dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm I/O Interface: JST1.0x6(Power in)JST1.0x4(USB) Mounting Holes: 25.5x25.5mm Dimensions: 30x30x6.5mm Storage: 8G Recording: 1080p/720p Weight: 5.1g Operating Temperature: -20-40℃ Channels: 8 Wide Power Input: 3.1V-5V Supported FC System: Betaflight OSD: Canvas mode Bitrate: 25mbps, 50mbps Latency Average delay: 22ms Antenna: IPEX Avatar lite camera Model: Avatar lite camera Image Sensor: 1/2.7”1nch Resolution: 1080P/60fps,720P/120fps,720P/60fps Ratio: 16/9 4/3 Lens:2.1mm FOV: 170° Aperture: F2.0 Shutter Rolling: Rolling shutter Min.Illumination: 0.001Lux Weight: 1.8g Dimensions: 14x14x16mm  Includes 1x Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ Avatar Nano Cam - ELRS 2.4 GHz 4x 1609 - 4 40mm 1.5mm shaft 2x TPU Battery Mount 1x Hardware Screw Set 4x Prop guards

Read more less

The Firefly 1S Nano Baby V2 is a micro-drone with improved flight time, power and design compared to its predecessor.  Power has increased by 30%, with flexible flight, exceptional maneuverability, and higher speeds.  A new canopy for camera protection and a bottom plate for sturdiness are integrated. Additionally, this model includes the GOKU F411 ELRS 1S AIO V2 with ELRS 2.4G receiver (UART 2) for a lightweight design with optimal performance. This version utilizes the elite capabilities of the HDZero HD digital VTX system. The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator.  Check out our other pre-built quads, as well as other great products from Flywoo! Features: Redesigned canopy with enhanced aesthetics and reinforced camera protection. The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter. Equipped with ROBO 1002 23,500KV motor and 1609 4-bladed 40mm propellers, delivers a 30% increase in power, flexible flight, and impressive speeds - perfect for racing competitions. The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance.  A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector. New battery compartment design allows for easy replacement of batteries of different models. Specifications Motor:  ROBO 1002 23,500KV Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0 Props:  1609 - 4 blade 40mm 1.5mm Shaft HD Digital VTX System:  HDZero Whoop Lite Bundle Receiver:  ExpressLRS 2.4GHz Weight:  31g Flight Time:  Explorer 1S 450mAh HV V2: 4m - Explorer 1s 750mAh HV V2: 6m (approximate) Speed:  70km/h (approximate) GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller MCU: STM32F411CEU6  GYRO: ICM42688 UARTS: 1/2 Soft serial port: 1 I2C: SCL/SDA BEC: 5V  Input Voltage: 1S (<4.35v) Firmware: FLYWOOF411_5IN1_AIO  Mounting:  25x25mm, M2 Onboard 4in1 ESC MCU: EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A  Firmware: BLHeli_S Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT 150/300/600 ELRS 2.4G RX (UART2) Flywoo ROBO 1002 23500KV Fpv Motor: Configuration: 9N12P Stator Diameter: 10mm Stator Length: 2mm Shaft Diameter: 1.5mm Motor Dimension(Dia.xLen): Φ13.5x7.75mm Weight(g): 2.5(5cm wire) Idle current(5)@5V(A): 1.5 No.of Cells(Lipo): 1S Max Continuous Power(W)3S: 52 Internal Resistance: 75mΩ Max Current(3S): 14A Max Efficiency Current: (2-4A)>84% HDZero Whoop LITE VTX Input Voltage: 1S-3S Output Power: 23mW, 200mW Operating Frequency: 5.727-5.850GHz Resolution: 1280x720@60fps Power Consumption: 5W @ 25mW, 5.8W @ 200mW MSP Canvas Mode: Yes Antenna Interface: U.FL (IPEX 1) Operating Temperature: 32-104°F Mounting Pattern: 25x25mm, M2 Weight: 7g total package HDZero Nano LITE Camera Size: 14x16x11mm Weight: 1.5gram Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65° Includes  1x Flywoo BNF Firefly FR16 Nano Baby HD V2.0 1S 1.6" Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz 4x 1609 - 4 40mm 1.5mm shaft 2x TPU Battery Mount 1x Hardware Screw Set 4x Prop guards

Read more less

 All products with batteries must be shipped by a ground shipping method. Check out the this BNF Meteor75 Pro HD 1S Brushless Whoop from BETAFPV. This quad is impressive with its clean aesthetic and its down right power performance.  BETAFPV wants you to know this is the largest 1S digital whoop you can get today. This BNF will feature a F4 1S 5A FC, with 1102 22000Kv motors and ideally you would want a 550mAh 1S Battery to use with this quad. With this frame, you will get to see a more roomier battery slot for ease of use, as well as to able to accommodate  a bigger battery.  Note: The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP.  Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection! Features The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks. It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter. Micro Canopy Lite has an adjustable camera lens of 0-40°. This new canopy weighs only 1.1g, which is very suitable for HD digital VTX drone, and the open design makes the electronics cooler better. Equipped with F4 1S 5A flight controller (Serial ELRS 2.4G or SPI Frsky). The ELRS 2.4G RX version comes with the default ELRS V2.0 firmware and supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware. The SPI Frsky version can be also used as the PNP version to connect external receiver due to the two UART ports on the board. The various colors of the spare parts including the Meteor75 Pro frame and Micro Reserve two UART ports on F4 1S 5A FC(SPI Frsky) V3.0 board. The Frsky version also can be used as the PNP version. Therefore, pilots can connect the external receiver to it. Ultralight weight for Meteor75 Pro HD 35.77g (Walksnail)/ 34.87g (HDZero), this largest 1S drone combined with Walksnail or HDZero HD digital VTX system gives pilots an immersive flight experience and impactful visuals. HD Digital VTX System The Walksnail Avatar HD Mini 1S Lite uses H.265 high-efficiency video coding, an industry-leading technology, providing 1080P/60FPS image recording with 22ms ultra-low latency. It is specially designed for 3.1-5V power input and 7.8g lightweight, compatible with 1S whoop drone. Built-in 8 GB storage, this VTX has the capability of recording HD video without interference from capacity and exporting video by USB cable. Besides, with Canvas Mode, Betaflight full OSD display is supported and can be adjusted easily by remote control. Note: Please make sure that the battery voltage must be 3.1V at least when flying, otherwise, the HD digital VTX would stop working. Flight Controller The latest F4 1S 5A flight controllers are applied to all BNF versions of Meteor75 HD. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. The ESC on the new board is powered by BB51 hardware in place of BB21. Last but not least, we update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC. Meteor75 Pro HD (ELRS) Meteor75 Pro HD (Frsky, PNP, TBS) FC Inside F4 1S 5A FC (Serial ELRS 2.4G) V2.0 F4 1S 5A FC (SPI Frsky) V3.0 Gyro BMI270 BMI270 FC Firmware BETAFPVF411 BETAFPVF411RX UART Port One UART Port Two UART Ports External RX Not Supported Supported Note: Pay attention, ONLY the newest Betaflight firmware 4.3.1 start to support this BMI270 gyrometer. Please check the below link to download the firmware and CLI dump file. If you update the 4.3.1 firmware from Betaflight official site, please flash the CLI dump file for Meteor75 HD. Micro Canopy Lite Micro Canopy Lite is specially designed to be compatible with HD digital VTX and has an adjustable camera lens of 0-40°. By using the new Micro Canopy Lite, the weight of the drone is reduced, which in turn can improve flight performance and increase flight time. The open design helps to dissipate heat more effectively, reducing the risk of damage to the VTX or other electronic components inside the drone. Endurance Boosting Battery With the new BT2.0 550mAh 1S battery, Meteor75 Pro HD ensures more flight time up to 5:30 (Walksnail)/5:40 (HDZero) so that pilots can less worry about the battery. What's more, it has a discharge of 40C (continuous) and 80C (burst), bringing a robust flight experience to pilots. Meteor HD Series BETAFPV has been optimizing and upgrading the Meteor series for better performance. The Meteor HD Series whoop drones including Meteor75 1S HD, and Meteor85 2S HD with Walksnail or HDZero HD digital VTX system aim to provide pilots with an immersive flight experience for FPV racing and high-definition images. Meteor75 Pro Frame Meteor75 Pro frame is the largest 1S whoop frame with 45mm propellers currently and comes with more features. The frame features a roomier battery slot for more battery choices such as BT2.0 550mAh battery. The motor holder is using a triangle bilateral stretch structure, giving pilots a more durable and smoother flight experience. In addition, the Meteor75 Pro frame offers seven colors for options, which pilots should purchase separately. Powerful 1S Drone Combo Even carrying the HD digital VTX system, Meteor75 Pro HD still performs well in power and speed thanks to its upgraded frame that is suitable for 45mm props, allowing it to be the largest 1S power whoop drone with greater thrust and lift. Fit out with 1102 22000KV motors and BT2.0 550mAh 1S battery, this 1S drone combo has an excellent thrust-to-weight ratio performance and provides an immersive flight experience to pilots. Specification Item: Meteor75 Pro Brushless Whoop Quadcopter (1S HD Digital VTX) Flight Time: 5:30 (Walksnail)/ 5:40 (HDZero) Camera Adjustable Angle: 0-40° Motors: 1102 22000KV Motor Battery: BT2.0 550mAh 1S Battery Frame: Meteor75 Pro Brushless Whoop Frame Propellers: Gemfan 45mm 3-Blade Propellers Canopy: BETAFPV Micro Canopy Lite Weight Without Battery: 35.77g (Walksnail)/34.87g (HDZero) Receiver: Serial ELRS 2.4G/SPI Frsky/TBS FC&ESC: F4 1S 5A FC (Serial ELRS 2.4G) V2.0/F4 1S 5A FC (SPI Frsky) V3.0 VTX Power Output: 350mW (Walksnail), 25mW/200mW (HDZero) VTX: Walksnail Avatar HD Mini 1S Lite Kit/HDZero Whoop Lite Bundle Camera: Wanlksnail Avatar Lite Camera/HDZero Nano Lite Camera FAQ Download the FC firmware and CLI dump file for Walksnail and HDZero version. Click to download the manual for Walksnail Avatar HD Mini 1S Lite Kit. Click to download the manual for HDZero Whoop Lite Bundle. Includes 1x BetaFPV BNF Meteor75 Pro 1S Brushless Whoop w/ HDZero & Nano Lite Cam (BT2.0) - Choose Your Receiver 2x BT2.0 550mAh 1S Battery 1x Type-C USB Cable 1x BT2.0 Battery Charger and Voltage Tester 4x 45mm 3-Blade Props (1.5mm Shaft) 1x Screwdriver 1x VTX USB Cable (Walksnail or HDZero Version) 1x Pack of Screws

Read more less

All batteries must be shipped by a ground shipping method.  Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level of flying FPV. Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 300mAh - BT2.0 Check out our other RTF combos, all our pre-built quads, and our BetaFPV selection! Features Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level. Two FC versions are offered for pilots. With the support of the Betaflight configurator, beginners can learn quadcopter configuration through the Betaflight FC version. For pilots who prefer the classical Cetus, the Cetus FC version with an altitude hold function is also coming soon. Classical white design inherited from Cetus Series and made of PA12 material, the Cetus X frame has an excellent impact resistance in drop & impact and reduces the risk of damage, giving you more peace of mind. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market. The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment. Powerful Propulsion System Equipped with 1103 11000KV Brushless Motors and Gemfan 2020 4-blade props, the Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. The whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience. Recording Every Flight Moment Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience. Improved Video Transmission Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-450mW VTX features a lightweight and adjustable output power for long-distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, the C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with the C02 FPV camera. LiteRadio 3 Radio Transmitter This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you. FPV Simulator Supported First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here. Various Modes, Accessible to All Cetus X supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one. BETAFPV Cetus Series The BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus Series always satisfies customers' needs no matter new beginners or seasoned pilots. Specification Item: Cetus X FPV Kit Weight: 55g Wheelbase: 95mm FC: F4 1S 12A FC Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G (Betaflight)/Frsky D8 (Cetus) VTX: M04 25-400mW VTX Quadcopter: Cetus X Brushless Quadcopter Transmitter: LiteRadio 3 Radio Transmitter Goggles: VR03 FPV Goggles Battery: 2x BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Includes 1x Cetus X Brushless Quadcopter (Betaflight Firmware, ELRS 2.4G Receiver) 1x LiteRadio 3 Transmitter (ELRS 2.4G) 1x BETAFPV VR03 FPV Goggles  4x BT2.0 450 mAh 1S Lipo Battery  1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C to FC Adapter 1x Prop Removal Tool 4x Gemfan 2020 4-Blades Prop (Spare Set) 1x Portable Storage Bag FAQ For more info and instructions, please check the User Manual for Cetus X FPV Kit. Please DO NOT configure ESC or Motor settings on the Betaflight configurator. The VR03 FPV goggles do not include a Micro SD card. You should prepare it before using the DVR recording function. The External TX module for LiteRadio 3 should be bought separately. Recommend BETAFPV Nano TX Module.

Read more less

The iFlight Nazgul5 V3 6S 5" Freestyle Analog Quad is here! It includes the RaceCam R1 FPV Camera and Nazgul 5" tri-blade props, XING-E Pro 2207 motors, BLITZ F7 Flight Controller, BLITZ 1000mW+ VTX, and the BLITZ E45S 2-6S 45A BLHeli32 4-in-1 ESC. Boasting CNC aluminum camera mount with vibration-reduction silicone for increased protection. Great for freestyling and long-distance shots with your GoPro camera! The Nazgul5 Freestyle quad is a go-to gold standard for freestyle BNFs of great value made by the great people at iFlight.  The Nazgul5 V3 is a 5" freestyle frame is made of super stiff carbon for minimal resonance. + High-quality parts+ Sturdy frame structure+ Generous mounting space+ Optimized for O3 Air Unit+ GoPro camera mount included  Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products! Features XING-E Pro 2207 motors and NAZGUL F5 props 5" version also fits 5.1" style propellers Fits both 30.5x30.5 and 20x20 stacks 5mm arm design for more durability Popular True-X configuration LED illuminated logo TPU crash-guards Easy-Swap arms Specifications Product Name：Nazgul5 V3 6S Analog FC: BLITZ F722 FC ESC: BLITZ E45S 45A 4-IN-1 ESC Video Transmission: BLITZ 1mW+ VTX Frame: 245 ±2 mm wheelbase Motor: XING-E Pro 2207 motors Prop: Nazgul 5 inch propellers Takeoff Weight: Approx. 435g / 660±10g (With 6S 1400mAh Battery) Dimensions (L×W×H): 173×173×34±2 mm Diagonal Distance: 245mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 7.5 mins (No Load with 6S 1400mAh Battery) Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range：-10° to 40° C (14° to 104° F) Antennas: Single Antenna Video Transmission System Product Name: BLITZ Whoop 1mW+ VTX Input voltage: 7V～34V Interface: MMCX Power levels: PIT/25mW/400mW/800mW/1600mW Channels: 40 (including Raceband) Mounting pattern: 30.5x30.5mm/Φ3 Lightweight: 18.9g (excluding antenna) VTX telemetry: IRC Tramp Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight! RC Tramp VTX table values: 25mW/400mW/800mW/1600mW Includes 1x Nazgul5 V3 6S Analog BNF 1x Antennas 2x Battery pads 2x Nazgul F5 Prop(Pairs)

Read more less

Introducing the BOB57, a 6" cinematic long-range quad pre-installed with the all-powerful DJI O3 system for crystal clear image quality. This quad aims to best of 5" and 7", hence the name BOB57. This quad is DJI PNP, meaning it does not come with a receiver, meaning you need to install your receiver.  However, if you have the DJI FPV Remote Controller 2, you can bind to the O3 Air Unit. This quad also comes with a GPS pre-installed, allowing all the marvelous features a GPS allows you. The BOB57 comes with XING2 2506 motors with a rated KV 1500, designed around 6S power.  The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot & videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights. Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products  Features Hybrid motor design optimized for  that can be used with both bi-blade and tri-blade 6" propellers. High-end GPS is used to minimize the risk of failure during proximity flights Long backbone with enough space up to fit 3000mAh 6S batteries Solid antenna mount for less oscillations when using long antennas Gladiator shell protects from dust and water droplets ESCs with built-in spike absorbers for more reliability Built-in BEC to directly power a GoPro camera 9-minute flight time with 3000mAh 6S Lipo Front-mounting XT-60 DJI O3 Air Unit VERSATILE BODY The Body is designed to carry small to large batteries for agile or long-range missions. SMART XT60 AND USB-C PLUG The XT60 plug is located in the front to gain more space. With the USB-C plug you can directly power your GoPro/Action Cams. OPTIMIZED MOTOR AND PROPS The Motor is designed for 6inch to give both great performance and efficiency. The prop is specifically optimized for this drone. RELIABILITY The BOB57 comes with a shell that protects against hits, droplets, and dust. It also has a high-quality GPS and components for more reliability, like a spike absorber & extra capacitor. PRE-TUNED AND PRE-SETUP Don't worry about tuning, iFlight did that for you already! A basic PID and Filter tuning were applied for a great flight experience! Links Ellis van Jason Tune Setup Specifications Product Name: BOB57 O3 6S HD BNF FC: BLITZ F722 ESC: BLITZ E55 55A 4-IN-1 ESC Video Transmission: DJI O3 Air Unit Frame: 280mm wheelbase Motor: XING2 2506 motors Prop: GEMFAN 6032-3 propellers Takeoff Weight: Approx. 580 g Dimensions (L×W×H)：226×166×34 mm Max Speed: 180 Km/h (Manual Mode) Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 8 mins (With 6S 1400 no load.) Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: 2 Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass Video Transmission  Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Dimensions (L×W×H): L32.5x W30.5xH 14.5mm Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V Audio Transmission: N/A  Includes 1x BOB57 6S HD BNF 2x Antennas 2x Battery pads 2x Prop(Pairs)

Read more less

After our very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.  Our all-new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here.  ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all-new 2205 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to its 3inch predecessor which gives a lot more room for a lot more fun. Our GPS-measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch-outs or light freestyle moves.  A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization). Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products! Note: Battery, GoPro, and GoPro mount are NOT included. Check out our other pre-built quads, as well as the rest of our iFlight selection! Features High-performance True-AIO Board Beast Whoop F7 AIO 55A v2.0 to save weight and space T700 Quality Carbon (40% more tensile strength compared to common 3K carbon) Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable) Low Resonance frame construction (Less Jello, more Cinematic footage) Pre-tuned with smooth freestyle settings Butter smooth 2205 3200KV (4S) ProTek35 Prop Guards V2.0 No Props or frame in view! Pre-Tuned & Pre-Setup: Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning were applied for a great flight experience! To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps" Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess! Please check our linked article on "How to disable Angle-Mode, and activate Acro-Mode" Specifications Beast F7 V2 AIO FC MCU: BGA-STM32F745 Gyro: BMI270 Blackbox: 8Mb Onboard Flash BEC output: 5V 2.5A Barometer: BMP280 Connector: Micro-USB OSD: AT7456E FC Firmware：IFLIGHT_F745_AIO_V2 Mounting pattern: 25.5x25.5mm φ3mm Dimensions: 32.5x32.5mm Weight: 8.5g F7 55A 2-6S ESC Current Sensor: Yes Input: 2-6S LIPO Current scale: 200 Constant: 55A  BLHeli: BLHeli-S Telemetry: no ESC Firmware: BlheliS G-H-30 Mounting pattern: 25.5x25.5mm/Φ3mm Dimensions: 32.5x32.5mm SucceX Mini Force 5.8GHz 600mW VTX Power: PIT/25/200/400mW/600mW Antenna interface: MMCX VTX protocol: IRC Tramp Output 40 channels. Size: 29x29mm Mounting pattern: 20x20Φ3/25x25 mmΦ2 Weight: 4g   Includes 1x ProTek35 Frame 2x Albatross RHCP RP-SMA 5.8g antenna 1x TPU Antenna holder 2x Nazgul 3535 propeller (Set of 4 - Color May Vary) 1x iFlight Lipo Strap 15x150mm (Color May Vary) 1x iFlight Lipo Strap 15x250mm (Color May Vary) 1x GoPro TPU bottom stand black (GoPro Protector not included)

Read more less

All product containing lithium batteries must be shipped by a ground shipping method. Please be aware Betaflight 4.3.1 firmware has a bug, Please do not flash version 4.3.1. This is the V2 version of the Mobula 6 HD. This version features an ICM20689 Gyro as well as an OpenVTX 400mW VTX. The Highly sought after Mobula6 now comes in HD! Record all your sessions in HD with the onboard RunCam split 3 Lite.We recommend RDQ 1S 300mAh LiPos for this whoop! Be sure to check out all our pre-built quads, and all our Happymodel products!  Features AIO 4IN1 Crazybee F4 Lite flight controller built-in 5.8G VTX Extreme light 1S 65mm Brushless HD whoop only 27g Come with Runcam Split3-lite 1080P HD DVR Smooth and agile Compatible for 1S Lipo/LIHV Camera Angle adjustable Specifications Wheelbase: 65mm Size: 80x80x40mm Weight: 27g Receiver option: Internal SPI Frsky version (Compatible with ACCST D8/D16, Recommend D8 mode) Internal SPI Flysky version(Compatible with AFHDS and AFHDS-2A Flysky transmitter) Internal SPI DSM2/DSMX version(Compatible with SPEKTRUM DSM2/DSMX protocol radio transmitter) External TBS CRSF NANO version(Compatible with TBS Transmitters)  Motors Model: EX0802 19000KV Configuration: 9N12P Stator Diameter: 8mm Stator Length: 2mm Shaft Diameter: Φ1mm Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm Weight(g): 1.7g No.of Cells(Lipo): 1S only Flight Controller  (Frsky SPI RX version) CRAZYBEE F4 Lite Frsky version Firmware target: CrazybeeF4FR (Flysky SPI RX version) CRAZYBEE F4 Lite Flysky version Firmware target: CrazybeeF4FS (DSM2/X SPI RX version) CRAZYBEEX DXS  DSM2/X version firmware target: CrazybeeF4DXS (External TBS CRSF NANO RX version) CRAZYBEE F4 Lite Firmware target: CrazybeeF4DX MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: ICM20689 Board size: 28.5 * 28.5MM Power supply: 1S battery input (DC 2.9V-4.35V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G 400mW VTX Built-in SPI Frsky/Flysky/DSMX receiver Built-in 5V 1A BEC Built-in voltage detection ESC MCU upgraded to EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: O_H_5_REV16_7.HEX Default protocol: DSHOT600 VTX Output power: 25mw Frequency: 40CH Input voltage: 3.3V 5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smart audio ready Runcam Split3 Lite Model: RunCam Split3-Lite Field of View(FOV):Recording FOV 165°(FPV FOV: 165 ° @16:9, 130 ° @4:3) Video Resolution:1080@60fps/1080@50fps/1080@30fps/720@60fps Video File Format: MOV Image Resolution:2 MP TV Mode: NTSC (720*480)/PAL (720*576) Switchable Interface: JST 1.25mm / UART and SH 1.0mm Max Micro SD Card Supported 64G(need Class 6 or above, recommend Class 10/UHS-I/UHS-II/UHS-III) Hole Distance of Installation: 25.5*25.5mm PCB Size: 29*29mm Lens Module Size: 14*14mm Lens Specs: M9 Power Input: DC 5-20V(Non-direct power supply from battery. Powered directly with battery will generate surges and burn the camera.) Working Current: 450mA @5V Includes 1x Happy Model BNF Mobula 6 HD 1S Whoop Quad - Choose Your RX

Read more less

Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card. Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with Crazy F405 ELRS HD flight controller, EX1103 11000Kv motors, and Gemfan Hurricane 2023 tri-blade propellers for superior power performance.  Be sure to check out all our pre-built quads, and all our Happymodel products! Specifications Item Name: Mobula8 1-2S 85mm Micro FPV whoop drone Size: 120mmx120mmx50mm Brand Name: Happymodel Wheelbase: 85mm FLIGHT CONTROLLER Built-in voltage meter sensor, voltage meter scale 110 Built-in current meter sensor, current meter scale 470 MCU: STM32F405RGT6 (168MHZ, 1Mbyte FLASH) Power supply: 1-2S battery input (DC 2.9V-8.7V) GYRO Sensor: BMI270  (SPI connection) Built-in 12A(each) Blheli_S 4in1 ESC Mount hole size: 25.5mm x 25.5mm Built-in Serial ExpressLRS 2.4G Model: Crazy F405 ELRS HD Built-in BMP280 Barometer Built-in 8MBp black box ONBOARD UART ELRS 2.4GHZ RECEIVER Packet Rate option: 25Hz/50Hz/150Hz/250Hz/500Hz Could update firmware via ExpressLRS configurator Antenna: enameled copper wire 31mm length Default firmware version: ExpressLRS V3.0.1 Firmware target: HappyModel EP 2400 RX Telemetry output Power: <12dBm RF Frequency: 2.4GHz ONBOARD 4-IN-1 ESC Current: 12A continuous peak 15A (3 seconds) Factory firmware: Bluejay ESC V0.19 Support BLHeli_S Bluejay firmware Power supply: 1-2S LiPo/LiPo HV Default protocol: DSHOT300 Firmware target: Z-H-30 MOTORS Motor Dimension(Dia.xLen):Φ13.5mmx15.5mm Mode: EX1103 11000Kv Shaft Diameter:Φ1.5mm No.of Cells(Lipo):1-2S Configu-ration:9N12P Stator Diamter:11mm Stator Length:3mm Weight(g):3.8g PROPELLERS Center Hole Dia:1.5mm Center Thickness:5mm Props Dia:52.17mm Weight:0.88g Pitch:2.3inch Material: PC Includes 1x HappyModel BNF Mobula8 1-2S HD 85mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz

Read more less

For the shooting needs of complex indoor environments, GEPRC has recently released the 2" Cinewhoop CineLog20. Available in Link Wasp, O3 Air Unit, Walksnail, and Analog four mainstream video transmission systems on the market. The CineLog20 continues the CineLog series with a lightweight pusher design, and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform for O3 AIR Unit shooting, which can achieve an excellent anti-shake effect. The O3 Air Unit version can shoot 4K 60fps video without mounting any camera. It is lighter in weight and has a longer battery life. It adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, a reasonable and efficient power system makes the CineLog20 very quiet and has a long battery life, making your flight and shooting more assured. Using the one-piece injection molding camera mount, you can quickly mount GEPRC naked GoPro 8/9/10/11 cameras, Action2, insta360 Go2, Peanut, and other light and small action cameras. Find the recommended 4S 450-750mAh batteries here! Check out our other pre-built quads, as well as the rest of our GEPRC selection. Features Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image, with good anti-shake effect. Provide mainstream Link Wasp, O3 AIR Unit, and Walksnail HD video transmission versions, Bind-N-Fly to save the trouble of building and tuning. 2-inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting. SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried. Continuing the vibration-dampening structure of the CineLog series, which can effectively eliminate the jello of the image caused by the body when flying with a Naked GoPro mounted. The GEPRC Team’s splendid tuning and overall flight feel are delicate and flexible. Specifications Model: GEPRC BNF Cinelog20 HD 4S 2" Cinewhoop w/ RunCam Wasp & Micro Cam - ELRS 2.4GHz Frame: GEP-CL20 Wheelbase: 100mm Gimbal plate: 2.0mm Top plate: 2.5mm Bottom plate: 1.5mm FC system: GEP-F411-35A AIO MCU: STM32F411CEU6 Gyro: ICM 42688-P OSD: Betaflight OSD w/AT7456E chip ESC: 8Bit 35A VTX: Link Camera: RunCam Wasp Antenna: GEPRC Peano 5.8G LHCP U.FL Motor: GR1303.5 5500KV Propeller: EMAX Avan Micro 2×2.4×4 Receiver: PNP (built-in DJI receiver), ELRS2.4G Recommended battery: LiHv 4S 450mah-660mah Flight time: 4-6min Includes 1x CineLog20 HD Wasp 2x 2-inch propellers (pairs) 1x Naked GoPro Base 2x M15×150mm battery strap 2x Battery Silicone Pads 2x EVA Landing Pads 1x Set of screws 1x L-shaped screwdriver (1.5mm) 1x Antenna fixed tube 1x 4S Naked GoPro power cable (with balanced terminal head) 2x EVA damping rings of guards 1x TBS Antenna mount (Vertical Type) 1x TBS Antenna mount (Horizontal Type) 1x TBS Antenna printed parts The screw package includes: 3x M2×12mm cup head screws 2x M2×5mm round head screws 1x M2×8mm round head screw with pad 3x M2×7mm round head screws 2x M2×8mm round head screws 2x M2 iron nuts 1x self-clinching nut

Read more less

For the shooting needs of complex indoor environments, GEPRC has recently released the 2" Cinewhoop CineLog20. Available in Link Wasp, O3 Air Unit, Walksnail, and Analog the four mainstream video transmission systems on the market. The CineLog20 continues the CineLog series with a lightweight pusher design, and the redesigned camera gimbal vibration reduction solution provides an excellent mounting platform for O3 Air Unit shooting, which can achieve an excellent anti-shake effect. The O3 AIR Unit version can shoot 4K 60fps video without mounting any camera. It is lighter in weight and has a longer battery life. It adopts GEPRC SPEEDX2 1303.5 5500KV motor and GEP-F411-35A AIO. Equipped with Emax 4-blade propellers, a reasonable and efficient power system makes the CineLog20 very quiet and has a long battery life, making your flight and shooting more assured. Using the one-piece injection molding camera mount, you can quickly mount GEPRC naked GoPro 8/9/10/11 cameras, Action2, insta360 Go2, Peanut, and other light and small action cameras. Find the recommended 4S 450-750mAh batteries here! Check out our other pre-built quads, as well as the rest of our GEPRC selection. Features Designed to mount a shock-absorbing gimbal under the independent FPV camera to reduce jello of FPV Goggles image, with good anti-shake effect. Provide mainstream Link Wasp, O3 AIR Unit, and Walksnail HD video transmission versions, Bind-N-Fly to save the trouble of building and tuning. 2-inch pusher design, small size and lightweight, more suitable for complex and narrow environments flight shooting. SPEEDX2 1303.5 5500KV motor with Emax four-blade propellers make the flight shooting unhurried. Continuing the vibration-dampening structure of the CineLog series, which can effectively eliminate the jello of the image caused by the body when flying with a Naked GoPro mounted. The GEPRC Team’s splendid tuning and overall flight feel are delicate and flexible. Specifications Model: GEPRC BNF Cinelog20 HD 4S 2" Cinewhoop w/ Walksnail Avatar & Micro Cam - ELRS 2.4GHz Frame: GEP-CL20 Wheelbase: 100mm Gimbal plate: 2.0mm Top plate: 2.5mm Bottom plate: 1.5mm FC system: GEP-F411-35A AIO MCU: STM32F411CEU6 Gyro: ICM 42688-P OSD: Betaflight OSD w/AT7456E chip ESC: 8Bit 35A VTX: GEPRC 5.8GHz@600mW Camera: Caddx Ratel2 Antenna: GEPRC Peano 5.8G RHCP MMCX Motor: GR1303.5 5500KV Propeller: EMAX Avan Micro 2×2.4×4 Receiver: ELRS2.4G Recommended battery: LiHv 4S 450mah-660mah Flight time: 4-6min Includes 1x CineLog20 Analog 2x 2-inch propellers (pairs) 1x Naked GoPro Base 2x M15×150mm battery strap 2x Battery Silicone Pads 2x EVA Landing Pads 1x Set of screws 1x L-shaped screwdriver (1.5mm) 1x Antenna fixed tube 1x 4S Naked GoPro power cable (with balanced terminal head) 2x EVA damping rings of guards 1x TBS Antenna mount (Vertical Type) 1x TBS Antenna mount (Horizontal Type) 1x TBS Antenna printed parts The screw package includes: 3x M2×12mm cup head screws 2x M2×5mm round head screws 1x M2×8mm round head screw with pad 3x M2×7mm round head screws 2x M2×8mm round head screws 2x M2 iron nuts 1x self-clinching nut

Read more less

Flywoo's Firefly Hex Nano V1.2 is the smallest hexacopter ever designed by Flywoo, weighing in at 74g. It powerfully and stably carries Insta 360go and SMO 4K cameras. The Firefly hex nano is small, flexible, stable, and is full of power and offers unmatched control. Check out our other pre-built quads, as well as other great products from Flywoo! Feature Hexacopter HD system Naked Vista Weighing only 74 grams Built in SMO Power Cable Prebuilt and tested Specifications Weight: 74g Wheelbase: 80mm FC & ESC:【No.C203】GOKU HEX F4 16x16 STACK - ( FC+13A ESC ) ( MPU6000) Frame: Firefly Baby Quad Frame (HD Verison) Motors: Nin V2 1203Pro 5500Kv Props: Gemfan 1636 40mm-4 V2.0 HD digital camera & VTX: Naked RunCam Link & RunCam Wasp Antenna: Atomic 5.8GHz Antenna Length 30mm (LHCP) Battery (Recommended): 4S 450mAh / 4S 300mAh battery (Not including) GOKU HEX GN405 Nano16X16 FC  MCU: STM32F405 BGA IMU: ICM42688P Barometer: DPS310 input voltage： 2-6S Onboard LED：WS2812x4 6 hardware UARTS (UART1,2,3,4,5,6) Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported. Onboard 16Mbytes for Blackbox logging 5V Power Out: 2.0A max 3.3V Power Out: 0.5A max Dimensions: 22x22mm Mounting Holes: 16x16mm Weight: 2.3g Firmware : FLYWOOF405NANO BS13A BLheli_S 2-4S 4in1 lBS20/35A BLheli_S 2-6S 4in1 Weight: 2.5g Mounting Hole: 16x16mm (M3) Support Oneshot, Multishot, DShot150/300/600 Nin V2 Motor Stator Size: 1203 Motor Bolt Pattern: 9x9mm KV: 5500 Wasp Nano HD Camera Dimensions: L18mmxW14mmxH18mm LENS: FOV D:160° H:127° V:92° Resolution: 720P@120fps(4:3) Net Weight: 6g(With Cable) Shutter: Rolling Shutter Coaxial Cable: 80 mm Image Sensor: 1/3" Naked Link Air Unit Input Voltage: 7.4-26.4V@ 4-9W Operating Frequency: 5.725-5.850 GHz Transmitter Power: (EIRP) FCC/SRRC: <30 dBm; CE: <14 dBm Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms Max. Transmission Distance: FCC/SRRC: 4 km; CE: 0.7 km; I/O Interface: Type-C, IPEX, 3-in-1 port, Supported Flight Control System: BetaFlight Operating Temperature Range: 0° to 40° C (32° to 104° F) Includes 1x Flywoo BNF Firefly Hex Nano V1.2 1.6" HD 4S Micro Quad w/ Naked RunCam Link & RunCam Wasp - Choose Receiver 1x Accessories (props, prop guard, RunCam link shell, battery straps, hardware, ect)

Read more less

Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo. Experience the great capabilities of HDzero System. Check out our other pre-built quads, as well as other great products from Flywoo! Features Redesigned canopy with enhanced aesthetics and reinforced camera protection. The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter. Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability. The GOKU Versatile F411 ELRS 1S AIO V2 boasts an ELRS 2.4G receiver, expertly connected via UART 2 instead of SPI for superior performance.  A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector. New battery compartment design allows for easy replacement of batteries of different models. Dead Cat Style The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers. New Design Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter. Efficient Power Combo Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability. Ultra-light AIO with ELRS 2.4G RXThe drone's GOKU Versatile F411 VTX 1S AIO V2 includes a built-in 250mW video transmitter, enabling an extended flight range and ultimate lightweight design without sacrificing performance, with improved circuit board stability.   HD Digital VTX System The HDZero Nano Lite Camera is a revolutionary product designed for lightweight drones, weighing only 1.5g and combined with the new Whoop Lite VTX at 4.5g. Supporting 1-3S power input, it can record in 720P/60FPS with ultra-low latency of less than 19ms and features OSD function configuration through Betaflight Configurator. More Power, More Flight Time The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed.  Specifications Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit Motor: ROBO 1002 19800KV Electronic: GOKU Versatile F411 ELRS 1S 5A AIO V2.0 Propeller: 1608-3 Blade 40mm 1.5mm Shaft Camera: Nano Lite Cam Weight: 31g GOKU Versatile F411 ELRS 1S 5A AIO V2.0Flight Controller MCU: STM32F411CEU6  GYRO: ICM42688 UARTS: 1/2 Soft serial port: 1 I2C: SCL/SDA BEC: 5V  Input Voltage: 1S (<4.35v) Firmware: FLYWOOF411_5IN1_AIO  Mounting:  25x25mm, M2 Onboard 4in1 ESC MCU: EFM8BB21 Power supply: 1S LiPo/LiPo HVCurrent: 5A Firmware: BLHeli_S Factory firmware: O_H_5_REV16_8.HEX Default protocol: DSHOT 150/300/600 ELRS 2.4G RX (UART2) ROBO 1002 19800KV Configuration: 9N12P Stator Diamter: 10mm Stator Length: 2mm Shaft Diameter: 1.5mm Motor Dimension(Dia.xLen): Φ13.5x7.75mm Weight(g): 2.5(5cm wire) Idle current(5)@5V(A): 1.3 No.of Cells(Lipo): 1S Max Continuous Power(W)3S: 44 Internal Resistance: 89mΩ Max Current(3S): 11.8A Max Efficiency Current: (2-4A)>84% HDZERO WHOOP LITE VTX Input Voltage: 1S-3S Output Power: 23mW, 200mW Operating Frequency: 5.727-5.850GHz Resolution: 1280x720@60fps Power Consumption: 5W @ 25mW, 5.8W @ 200mW MSP Canvas Mode: Yes Antenna Interface: U.FL (IPEX 1) Operating Temperature: 32-104°F Mounting Pattern: 25x25mm, M2 Weight: 7g total package HDZERO NANO LITE CAMERA Size: 14x16x11mm Weight: 1.5gram Sensor: 0.5 inch, up to 10650 mV/Lux-secUltra-high sensitive CMOS sensor FOV:- 4:3 D:130° H:108° V:84°- 16:9 D:122° H:108° V:65° Includes 1x Flywoo BNF Firefly DC16 Nano Baby V2.0 HD 1S 1.6" Deadcat Micro Quad w/ HDZero Whoop Lite & Nano Lite Cam - ELRS 2.4 GHz 4x 1608 -3 40mm 1.5mm shaft 2x TPU battery mount 1x hardware screws set 4x Prop guards

Read more less

All products containing lithium batteries must be shipped by a ground shipping method. The TinyHawk II Freestyle RTF kit has literally everything you need to get started in the world of freestyle FPV! Quad, Goggles, Transmitter, Batteries, Charger and an awesome case to carry all of it. This kit is the best way to start from nothing and work your way up to learning more advanced freestyle tricks. It's also a great option if you're looking for a compact setup you can keep with you to rip a few quick packs wherever and whenever! Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection! Specifications Frame Wheelbase: 115mm Dry Weight: 49g All Up Weight: 79g with 2x 450mAh 1S battery Frame Material: Carbon Fiber Motors Stator Size: 1103 Kv: 7000kv Propeller Mount: T-mount, 1.5mm shaft Propeller: Avan Rush 2.5" All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver Battery Connector: JST-PH2.0 Duo FPV System VTX Power: 25/100/200mw Switchable (set to stay at 25mW until armed)* Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk 2 Freestyle Drone 1x E6 Transmitter 1x Transporter Goggles w/ Battery + Antennas 2x EMAX 450mAh 1S HV Battery 1x 1S USB LiPo Charger 1x Screwdriver + Hardware Kit 1x Carbon Fiber Carrying Case *Please note that even if you unlocked the video transmitter (VTX) per the manual and are changing power levels via the OSD/Smart Audio (VTX SA), the Tinyhawk II Freestyle is set to stay at 25mW until you arm the mot  

Read more less

All products containing batteries must be shipped by a ground shipping method. Diatone continues to impress and this time it's with a car, not quad! This 1:76 scale RC car is an ideal size for cruising around the house and finding even the smallest of gaps to roll through. If you're more into racing than flying, check out the Diatone Mouse Pad Mini Car Table Top Racing Track. RTR FPV Version Available as well as Single Kart w/ FPV Cam! The car is also compatible with FLYSKY AFHDS protocol! Make sure to check out the rest of our Diatone gear! Features Off-Road Style High Chassis, Suitable for almost all kinds of roads New Q2 remote controller Controllable braking function Precise Proportional Steering Long battery life Three-Stage reduction gearbox design Specifications 1:76 Q33 karting car Body ratio: 1:76 Wheelbase: 33mm Ground remote control distance: about 50 meters  Battery Life: about 60min Maximum steering angle: 30° Drive mode: proportional drive Steering mode: proportional steering Battery capacity: 3.7v 110mAh Working frequency band: 2.4G Size: 55X40 X 26mm Weight: 19g Diatone Q2 Remote Working frequency band: 2.4G Transmitting power: ≤25mW Ground remote control distance: about 50 meters Input Power: 1.5v AA×2 Weight: 13g Includes 1x Q33 Karting Car  1x USB charger 1x Manual 1x Q2 car remote control 1x Spare car shell

Read more less

Diatone continues to impress and this time it's with a car, not quad! This 1:76 scale RC car is an ideal size for cruising around the house and finding even the smallest of gaps to roll through. If you're more into racing than flying, check out the Diatone Mouse Pad Mini Car Table Top Racing Track. Note: This is a Discontinued Product, meaning this is the last batch of them RTR FPV Version Available as well as Single Kart w/ FPV Cam! The car is also compatible with FLYSKY AFHDS protocol! Make sure to check out the rest of our Diatone gear! Features Off-Road Style High Chassis, Suitable for almost all kinds of roads New Q2 remote controller Controllable braking function Precise Proportional Steering Long battery life Three-Stage reduction gearbox design Specifications 1:76 Q33 karting car Body ratio: 1:76 Wheelbase: 33mm Ground remote control distance: about 50 meters  Battery Life: about 60min Maximum steering angle: 30° Drive mode: proportional drive Steering mode: proportional steering Battery capacity: 3.7v 110mAh Working frequency band: 2.4G Size: 55X40 X 26mm Weight: 19g Diatone Q2 Remote Working frequency band: 2.4G Transmitting power: ≤25mW Ground remote control distance: about 50 meters Input Power: 1.5v AA×2 Weight: 13g Includes 2x Q33 Karting Car  1x USB charger 1x Manual 1x Q2 car remote control 1x Spare car shell

Read more less

All batteries must be shipped by a ground shipping method. Brush up on your FPV skills with the BetaFPV RTF Cetus FPV Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case. You have everything needed to get into FPV, including the LiteRadio 2 SE Transmitter, VR02 FPV Goggles, and the Cetus Whoop. Easy to carry on and ready to fly. What are you waiting for? Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 300mAh - BT2.0 Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features 3 Flight modes Altitude hold and emergency landing functions Storage case FrSky D8 protocol drone and radio Brushed drone, easy to fly Specifications Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 Flight controller: Lite 1S Pro brushed FC VTX: 25mW Camera tilt degree: 25° Camera: C01 FPV Micro Camera Transmitter: Literadio2 SE Transmitter TX mode: Mode 2 (Left stick throttle) Goggles: VR02 Goggles Motor: 716-19000KV Brushed motor Propeller: 31mm 4-blade 0.8mm shaft hole Takeoff weight: 35g(with battery) Power system: 1S Battery: BT2.0 300mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (Clear line of site) Includes 1x Cetus Brushed Quadcopter                              1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)                         1x VR02 FPV Goggles    2x BT2.0 300mAh 1S Lipo Battery      1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C Adapter 1x Prop Removal Tool 4x 31mm 4-Blade Props 1x Portable Storage Bag User Manual

Read more less