Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

CloseClose

Products

17 products

Alphabetically, A-Z

Featured Best selling Alphabetically, A-Z Alphabetically, Z-A Price, low to high Price, high to low Date, old to new Date, new to old

  • (PRE-ORDER) BetaFPV RTF Cetus FPV Analog Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case (PRE-ORDER) BetaFPV RTF Cetus FPV Analog Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case

    RaceDayQuads (PRE-ORDER) BetaFPV RTF Cetus FPV Analog Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case

    All PRE-ORDERS shipping ASAP!! All batteries must be shipped by a ground shipping method. Brush up on your FPV skills with the BetaFPV RTF Cetus FPV Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case. You have everything needed to get into FPV, including the LiteRadio 2 SE Transmitter, VR02 FPV Goggles, and the Cetus Whoop. Easy to carry on and ready to fly. What are you waiting for? Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 300mAh - BT2.0 Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features 3 Flight modes Altitude hold and emergency landing functions Storage case FrSky D8 protocol drone and radio Brushed drone, easy to fly Specifications Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 Flight controller: Lite 1S Pro brushed FC VTX: 25mW Camera tilt degree: 25° Camera: C01 FPV Micro Camera Transmitter: Literadio2 SE Transmitter TX mode: Mode 2 (Left stick throttle) Goggles: VR02 Goggles Motor: 716-19000KV Brushed motor Propeller: 31mm 4-blade 0.8mm shaft hole Takeoff weight: 35g(with battery) Power system: 1S Battery: BT2.0 300mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (Clear line of site) Includes 1x Cetus Brushed Quadcopter                              1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)                         1x VR02 FPV Goggles    2x BT2.0 300mAh 1S Lipo Battery      1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C Adapter 1x Prop Removal Tool 4x 31mm 4-Blade Props 1x Portable Storage Bag User Manual

    $159.99

  • (PRE-ORDER) BetaFPV RTF Cetus Pro FPV Analog Kit - Cetus Pro Whoop, Goggles, Transmitter, Batteries, Charger & Case (PRE-ORDER) BetaFPV RTF Cetus Pro FPV Analog Kit - Cetus Pro Whoop, Goggles, Transmitter, Batteries, Charger & Case

    RaceDayQuads (PRE-ORDER) BetaFPV RTF Cetus Pro FPV Analog Kit - Cetus Pro Whoop, Goggles, Transmitter, Batteries, Charger & Case

    3 in stock

    All PRE-ORDERS shipping ASAP!! All batteries must be shipped by a ground shipping method. The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles. It's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor. Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 450mAh - BT2.0 Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features The auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV. Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train. With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight. Made of PA12 material, the frame has an excellent impact resistance in drop & impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors. All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry. Specifications BetaFPV LiteRadio 2 Frequency Range: 2.4GHz (2403MHz-2447MHz) 2.4G System: NRF24L01 or CC2500 Channel: 8 Support Protocol: Bayang / Futaba S-FHSS / Frsky D16 FCC/ Frsky D16 LBT/ Frsky D8 Power: ≤100mw Adapted Drone Type: Multirotor Support USB Charging / Firmware Update Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration LED Light: Green-Power On / Red-Warning / Blue-Normal Battery: Built-in 1000mAh 1S Battery Charging Connector: Type-C BetaFPV VR02 Goggles Screen Size: 4.3" Screen Resolution: 800x480p Screen Brightness: 300cd/m2 Field of View: 55° Charging Port: USB-C Input Voltage: 3.7V 500mA Internal Battery: 3.7V 2000mAH Dimensions: 143x126x86.3mm Weight: 300g BetaFPV RTF Cetus Pro Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 VTX: 25mW Camera tilt degree: 25° Camera: C02 FPV Micro Camera Propeller: 40mm 3-blade 1.5mm shaft hole Power system: 1S Battery: BT2.0 450mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (Clear line of site) Includes 1x Cetus Pro Brushless Quadcopter                              1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)                         1x VR02 FPV Goggles    2x BT2.0 450mAh 1S Lipo Battery      1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C Adapter 1x Prop Removal Tool 1x Portable Storage Bag

    3 in stock

    $229.99

  • Azure Power Johnny Freestyle 4.8x3.8x3 POPO Compatible Tri-Blade 5" Prop 4 Pack - Choose Your Color Azure Power Johnny Freestyle 4.8x3.8x3 POPO Compatible Tri-Blade 5" Prop 4 Pack - Choose Your Color

    RaceDayQuads Azure Power Johnny Freestyle 4.8x3.8x3 POPO Compatible Tri-Blade 5" Prop 4 Pack - Choose Your Color

    100 in stock

    AZURE POWER 3 BLADES JOHNNY FREESTYLE, POPO COMPATIBLE With an extremely lightweight feel, smooth performance for the best possible image quality and industry-leading acceleration. Re-designed the airfoil of the blades to have the smoothest possible lift curve to ensure the Johnny freestyle prop have the best freestyle performance. With balance control in the highest standard in the industry, to ensure the drone images are as crisp and jitter free as can possibly be. Making your video juicier! Amazing durability POPO Compatible  With this brand new design, the JohnnyFPV Freestyle props will give you the best in smoothness, acceleration, and like all Azure Power props, amazing durability Set to be the new Freestyle standard. Specifications Length: 4.8" Pitch: 3.8 Hub I.D.: 5mm Material: High Grade Polycarbonate Available Color: Orange, Bright Green, Teal, Iron Grey Weight: 3.9g Included: 4x Azure Power Johnny Freestyle 4.8x3.8x3 POPO Compatible Tri-Blade 5" Prop (2CW, 2CCW)

    100 in stock

    $4.49

  • BayckRC ELRS 2.4GHz Receiver - T Antenna BayckRC ELRS 2.4GHz Receiver - T Antenna

    RaceDayQuads BayckRC ELRS 2.4GHz Receiver - T Antenna

    Out of stock

    Stay connected and in control with the BayckRC ELRS Nano Receiver. Designed with a T Antenna, this 2.4GHz receiver ensures steady and reliable signal transmission for your RC device. Experience seamless control and enjoy uninterrupted playtime with this receiver.  Features Small size 0.4g weight ELRS open source project, remote control The operation is simple Specifications Name: ExpressLRS Receiver RF: Freq: 2.4Ghz Connector: U.FL IC: SX1281+ESP8285 TX Power: 100mW Color: Black  Weight: 0.4g (receiver only) Size: 11mmx18mm Firmware: BAYCKRC 2.4GHz Nano RX Includes 1x BayckRC ELRS 2.4GHz Receiver - T Antenna

    Out of stock

    $9.99

  • BetaFPV BNF Cetus X Brushless Analog Whoop - ELRS 2.4G BetaFPV BNF Cetus X Brushless Analog Whoop - ELRS 2.4G

    RaceDayQuads BetaFPV BNF Cetus X Brushless Analog Whoop - ELRS 2.4G

    4 in stock

    All batteries must be shipped by a ground shipping method. Cetus X Brushless Quadcopter is a 2S power whoop drone and a primary choice for beginners who want to get advanced flight skills. It features a stronger propulsion system for a speedier and more violent flight, which is capable of performing diverse freestyle tricks. Equipped with M04 400mW VTX and C04 FPV camera that is optimized for longer radio and video transmission. Meanwhile, it supports the Betaflight configurator which is a popular application to configure RC aircraft. Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features An excellent preference for beginners to get advanced level. Cetus X brushless Quadcopter is proud of its lightning speed with rapid startup due to its stronger propulsion system. Build-in ExpressLRS 2.4G receiver that is the most popular radio link, low latency, and far controlling range are possible. Pilots can not only enjoy the flight indoors but also explore the scenery outdoor. Featuring M04 400mW VTX, C04 FPV camera (based on Caddx Nano Ant Camera or Runcam Nano 4), and 2xBT2.0 450mAh 1S 30C battery for longer radio and video transmission and flight endurance, Cetus X brushless quadcopter allows beginners to gain more achievements in FPV flight. Classical white design inherited from Cetus Series and made of PA12 material, Cetus X frame has an excellent impact resistance in drop & impact. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. Specifications Item: Cetus X Brushless Quadcopter Weight: 55g Wheelbase: 95mm FC*: F4 2S 15A V1.0 (Betaflight FC Version) Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G VTX: M04 25-400mW VTX Battery: 2*BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Downloads FC Firmware and ESC download Includes 1 x Cetus X Brushless Quadcopter 1 x BT2.0 Battery Charger and Voltage Tester 2 x BT2.0 450mAh 1S 30C Battery 1 x Phillips Screwdriver 1 x Prop Removal Tool 1 x Type-C Adapter 4 x Gemfan 2020 4-Blades Props

    4 in stock

    $129.99

  • BetaFPV RTF Cetus X FPV Analog Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case BetaFPV RTF Cetus X FPV Analog Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case

    RaceDayQuads BetaFPV RTF Cetus X FPV Analog Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case

    3 in stock

    Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level of flying FPV. Features Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level. Two FC versions are offered for pilots. With the support of the Betaflight configurator, beginners can learn quadcopter configuration through the Betaflight FC version. For pilots who prefer the classical Cetus, the Cetus FC version with an altitude hold function is also coming soon. Classical white design inherited from Cetus Series and made of PA12 material, the Cetus X frame has an excellent impact resistance in drop & impact and reduces the risk of damage, giving you more peace of mind. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market. The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment. Powerful Propulsion System Equipped with 1103 11000KV Brushless Motors and Gemfan 2020 4-blade props, the Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. The whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience. Recording Every Flight Moment Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience. Improved Video Transmission Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-450mW VTX features a lightweight and adjustable output power for long-distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, the C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with the C02 FPV camera. LiteRadio 3 Radio Transmitter This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you. FPV Simulator Supported First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here. Various Modes, Accessible to All Cetus X supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one. BETAFPV Cetus Series The BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus Series always satisfies customers' needs no matter new beginners or seasoned pilots. Specification Item: Cetus X FPV Kit Weight: 55g Wheelbase: 95mm FC: F4 2S 15A V1.0 (Betaflight FC Version) Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G (Betaflight)/Frsky D8 (Cetus) VTX: M04 25-400mW VTX Quadcopter: Cetus X Brushless Quadcopter Transmitter: LiteRadio 3 Radio Transmitter Goggles: VR03 FPV Goggles Battery: 2x BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Antennas: U.FL for Quad | RP-SMA for Goggles Includes 1x Cetus X Brushless Quadcopter (Betaflight Firmware, ELRS 2.4G Receiver) 1x LiteRadio 3 Transmitter (ELRS 2.4G) 1x BETAFPV VR03 FPV Goggles  4x BT2.0 450 mAh 1S Lipo Battery  1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C to FC Adapter 1x Prop Removal Tool 4x Gemfan 2020 4-Blades Prop (Spare Set) 1x Portable Storage Bag FAQ For more info and instructions, please check the User Manual for Cetus X FPV Kit. Please DO NOT configure ESC or Motor settings on the Betaflight configurator. The VR03 FPV goggles do not include a Micro SD card. You should prepare it before using the DVR recording function. The External TX module for LiteRadio 3 should be bought separately. Recommend BETAFPV Nano TX Module.

    3 in stock

    $289.99

  • HQ Prop V2S Freestyle 5x4.3x3 Tri-Blade 5" Prop 4 Pack - Choose Your Color HQ Prop V2S Freestyle 5x4.3x3 Tri-Blade 5" Prop 4 Pack - Choose Your Color

    HQ Prop HQ Prop V2S Freestyle 5x4.3x3 Tri-Blade 5" Prop 4 Pack - Choose Your Color

    274 in stock

    Specifications Propeller Diameter: 5 inch        Pitch : 4.3                  Blades : 3 Material : Poly Carbonate         Weight : 3.8g Hub Diameter : 12.8mm            Hub Thickness:6.5mm            Shaft :5mm Adaptor Rings : NO Includes 4x HQ Prop V2S Freestyle 5x4.3x3 Tri-Blade 5" Prop 4 Pack - Choose Your Color

    274 in stock

    $2.99

  • RadioMaster Boxer Max EdgeTX RC Transmitter - ELRS 2.4GHz - Choose Your Version RadioMaster Boxer Max EdgeTX RC Transmitter - ELRS 2.4GHz - Choose Your Version

    RadioMaster RadioMaster Boxer Max EdgeTX RC Transmitter - ELRS 2.4GHz - Choose Your Version

    63 in stock

    The Boxer Max Radio features a carbon fiber pattern case with AG01 hall gimbals, CNC buttons, and a roller for standard use. It also includes an adjustable CNC metal folding handle with upgraded leather grips and a RadioMaster neck strap for added comfort. Experience superior performance with the Boxer Max Radio!  Check out our RadioMaster collection and all our RC transmitters!  Features Optional 3 colors - Black/Red/Gold AG01 hall gimbals installed Carbon fiber pattern case CNC buttons and roller as standard Adjustable length CNC metal folding stand Upgraded black leather grips Available with built-in ExpressLRS RF modules Featuring a powerful STM32F407VGT6 with 1MB Flash and 192KB RAM Preinstalled EdgeTX firmware Internal ELRS module capable of 1,000Hz refresh rate Adjustable ELRS RF output QC3.0 fast charging support 2.0A MAX Compact design with excellent ergonomics New low-profile latching SE switch and momentary SF switch Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20-hour duration (Batteries not included) Standard JR module compartment Internal module cooling fan built in (ELRS version) RadioMaster standardized button layout Versatile 6-position switch for flight mode access Adjustable and Removable T-shape Antenna Industry-first fabric handle for improved portability Changeable, ergonomic grips Redesigned SD card slot with new and improved 512mb pre-loaded SD card included External module power slots in the battery cover RadioMaster signature carry case and gimbal protector are included as standard to ensure your radio stays safe while on the move. EdgeTX Operating System and ExpressLRS RF system pre-installed Preinstalled with EdgeTX and ExpressLRS, the BOXER has cutting edge software fit for its class-leading hardware. RadioMaster works closely with the EdgeTX and ExpressLRS teams to develop features and optimize the user experience. We will continue to contribute and support projects like EdgeTX and ExpressLRS, ensuring the concepts of open standards are carried forward into the future. Specifications Item: BOXER Max Radio Color: Black/Red/Gold Size: 235x178x77mm Weight: 532.5g Frequency: 2.400GHz-2.480GHz Internal RF: ELRS 2.4GHz Supported protocols: Module dependent Cooling fan: Built-in (ELRS version) Voltage Range: 6.6-8.4V DC Radio Firmware: EdgeTX (Transmitter) / ELRS (RF module) Channels: Max 16 channels (Receiver dependent) Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included) Display: 128*64 Monochrome LCD display Gimbal: AG01 CNC Hall Gimbal External module: JR / FrSKY / Crossfire compatible Upgrade Method: USB / SD card & EdgeTX Companion PC software BONUS: Radiomaster neck strap and CNC adjustable stand Includes 1x  RadioMaster Boxer Max EdgeTX RC Transmitter - ELRS 2.4GHz - Choose Your Version 1x Signature Carry Case 1x T Antenna 1x USB-C Cable 1x Gimbal Protector 1x 1.5mm Allen Key 2x M4x4 Screws 4x Low Tension Springs 1x Stickers 1x Manual 1x 18650 Battery tray (Batteries not included) 1x RadioMaster Neck Strap 1x Boxer KeyChain 1x Screen Protector

    63 in stock

    $285.99

  • RadioMaster Pocket Crush RC Transmitter - ELRS 2.4GHz - Choose Your Color RadioMaster Pocket Crush RC Transmitter - ELRS 2.4GHz - Choose Your Color

    RadioMaster RadioMaster Pocket Crush RC Transmitter - ELRS 2.4GHz - Choose Your Color

    2 in stock

    Pre-Orders shipping ASAP!  The next Crush line is here from RadioMaster! The Pocket Crush is now available in seven stunning colors—' Iron Grey,' 'Frost White,' 'Mint Mist,' 'Hot Pink,' 'Cherry Red,' 'Iceberg Blue,' and 'Lemon Twist Yellow'— each designed to inspire and excite. Your favorite "fun-sized" radio can now match the whole drone fleet! Check out all our RC Transmitters and our entire RadioMaster selection! Features Enhanced Connectivity Vibrant Color Options Durable Construction Hall Effect Gimbals Intuitive Interface Stylish Aesthetics Compact Design Ergonomic Grip Specifications Module Bay: Nano size (Compatible with RadioMaster Nano-size modules, TBS Nano Crossfire/Nano Tracer) Physical Dimensions: 156.6 x 65.1 x 125.3 mm (Folded size) / 156.6 x 73.1 x 154.8 mm (Unfolded size) Upgradable Firmware: Via USB or the included SD card Control Channels: Maximum 16 (Receiver dependent) Operating Frequency: 2.400 GHz – 2.480 GHz Battery: 2 pcs 18650 batteries (Not included) Supported Protocols: Module dependent Charging: Built-in USB-C QC3 charging Display: 128 x 64 Monochrome LCD Control Distance: >2 km @ 20 dBm Internal RF Options: ELRS 2.4 GHz Operating System: EdgeTx Weight: 288 grams Gimbal: Hall-effect RF Power Operational Voltage: 6.6 – 8.4 V DC ELRS EU-LBT: 20 dBm max ELRS FCC: 24 dBm max CC2500: 20 dBm max Includes 1x RadioMaster Pocket Crush RC Transmitter - ELRS 2.4GHz - Choose Your Color 4x Low Tension Springs 1x Custom Carry Pouch 1x Screen Protector 1x Manual 1x Sticker

    2 in stock

    $71.49

  • RadioMaster TX16S MKII EdgeTX RC Transmitter w/ V4.0 Hall Gimbals - MCK RGB Transparent Edition - ELRS 2.4GHz RadioMaster TX16S MKII EdgeTX RC Transmitter w/ V4.0 Hall Gimbals - MCK RGB Transparent Edition - ELRS 2.4GHz

    RaceDayQuads RadioMaster TX16S MKII EdgeTX RC Transmitter w/ V4.0 Hall Gimbals - MCK RGB Transparent Edition - ELRS 2.4GHz

    9 in stock

    Elevate your FPV drone experience with the RadioMaster TX16S MKII Radio Transmitter - MCK RGB Transparent Edition. A community favorite controller known for its precision and comfort remade in a stylish new way. This transmitter comes with full-size V4.0 Hall transparent gimbals. Enjoy the improved non-slip grip and precise control thanks to the updated sticky360 gimbal stick ends. Enjoy built-in RGB LED lighting effects with 4 modes and 5 colors, all housed in a special Transparent MCK Edition with a CNC metal folding handle. A controller like this will stand out while flying at night. Elevate your FPV drone experience with this MCK Radio! Check out our RadioMaster collection and all our RC transmitters!  Features Updated sticky360 gimbal stick ends to bring you a comfortable, non-slip experience. Built-in RGB LED Lighting effects with 4 modes and 5 colors. Clear Crystal Case and surrounding RGB lights design, experience the Heartbeat of Technology Improved internal circuitry and optimized power supply New charge circuitry with integrated reverse-polarity protection Optimized charge IC now allows up to 2.2A internal USB-C charge current Rear-mounted audio jack provided a headphone output V4.0 Gimbal improved centering and temperature stability Optional high/low rear grips are included for improved ergonomics Improved S1/S2 knobs with clear centre-detents Improved LS/RS Sliders with a smoother feel and better center detents Redesigned battery cover for improved battery access Retooled body shell with improved fit and finish Trainer socket changed to the standard TRS 3.5mm socket Rear DIY Socket was added for personalized mods Improved internal plastics for better longevity Special Transparent MCK Edition CNC metal folding handle Specifications Edition: TX16S MKII MCK Transparent Protocol: ELRS LED: RGB Item: TX16S MKII Radio Transparent Version Size: 287x129x184mm Weight: 750g (without battery) Transmission frequency: 2.400GHz-2.480GHz Transmitter module: Internal ELRS (SX1280) SD card: Newly updated 512MB card as standard Working current: 400mA Working voltage: 6.6-8.4v DC Radio firmware: EdgeTX Module Firmware: ExpressLRS (ELRS) Channels: Up to 16 channels (depending on the receiver) Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272 Gimbal: V4.0 Hall sensor Module Bay: JR-compatible module bay Upgrade method: Supports USB-C online / SD card offline upgrade Includes 1x RadioMaster TX16S MKII Radio Transmitter - MCK RGB Transparent Edition - ELRS 1x 18650 Battery Tray (Batteries Not Included) 4x Low-Tension Springs 1x Screen Protector Set 1x Raised Grips Set 1x Flat Grips Set 1x USB-C Cable 1x Allen Key 1x Sticker Set 1x Neck Strap 1x Keychain

    9 in stock

    $274.99

  • RDQ Series 22.8V 6S 1500mAh 120C LiHV Battery - XT60 RDQ Series 22.8V 6S 1500mAh 120C LiHV Battery - XT60

    RaceDayQuads RDQ Series 22.8V 6S 1500mAh 120C LiHV Battery - XT60

    20 in stock

    All batteries must be shipped by a ground shipping method. RDQ Series Lipos are known and loved by the community for their strong performance and solid reliability flight after flight, all while offering an unmatched level of value! Specifications Capacity: 1500mAh Continuous Discharge Rate: 120C Dimensions: 38x38x79mm Balance Lead: JST-XH, 40mm Discharge Lead: XT60, 75mm  Weight: 218g (+/- 1%) Includes 1x RDQ Series 22.2V 6S 1500mAh 120C LiPo Battery - XT60

    20 in stock

    $38.99

  • SpeedyBee Master 5 HD 5" Freestyle Frame Kit SpeedyBee Master 5 HD 5" Freestyle Frame Kit

    SpeedyBee SpeedyBee Master 5 HD 5" Freestyle Frame Kit

    2 in stock

    Introducing SpeedyBee's Master 5 series, designed specifically for freestyle. The innovative anti-shock fixed stack structure mitigates the effect of the motor for Gyro of FC, further stabilizing the running environment. And the arm's quick-release structure brings convenience for installation, with the number of screws averaging 1.5 per arm. Honeycomb-shaped aluminum alloy CNC drone head ensures a better look and strength. Designed with H-FOV 130 section, it provides a larger field of view. Furthermore, the detachable camera fixing plate is open for modification, supporting more mounting holes for the camera and helping get rid of vignetting. Honeycomb-shaped aluminum alloy cooling module (optional) is also designed for mounting under the VTX, improving the operation stability of DJI FPV and high-power analog VTX. Available in 2 versions.  The regular Master 5 frame has a 222mm wheelbase and is compatible with analog, DJI O3 Air Unit, and the Vista/Link Air Unit.  The Master 5 HD Frame has a wider 225mm wheelbase and is compatible with analog, DJI O3 Air Unit, Vista/Link Air Unit, and the original DJI Air Unit.   This is the regular Master 5 frame which is suitable for both analog and digital VTXs but props may be visible in certain configurations with this version Features Compact Model Design with Low Center of Gravity Honeycomb-shaped CNC Aluminum alloy Camera plates FOV130° Innovative Independent Anti-Shock Stack Fixed Structure for stabilization High-power VTX cooling Module Front XT60 Plug Arm Quick-Release Specifications Model: Speedy Bee Master 5 Frame Weight: 130g Top & Bottom Plate thickness: 2mm Arm thickness: 5mm Camera width: supports 19-20mm width 3D printed TPU Parts: Yellow Suitable prop size: 5", 5.1" FC mounting holes: 30.5 x 30.5mm and 20x20mm (M3) VTX mounting holes: 20x20mm (M2) Manual SpeedyBee Master 5 HD Installation Guidelines

    2 in stock

    $74.99

  • SpeedyBee Master 5 HD 5" Replacement Arm (1pc)

    SpeedyBee SpeedyBee Master 5 HD 5" Replacement Arm (1pc)

    3 in stock

    Replacement arm for the SpeedyBee's Master 5 HD 5" Frame. Includes 1x SpeedyBee Master 5 HD 5" Replacement Arm

    3 in stock

    $4.49

  • Tattu R-Line Version 4.0 22.2V 6S 1050mAh 130C LiPo Battery - XT60 Tattu R-Line Version 4.0 22.2V 6S 1050mAh 130C LiPo Battery - XT60

    Tattu Tattu R-Line Version 4.0 22.2V 6S 1050mAh 130C LiPo Battery - XT60

    2 in stock

    All batteries must be shipped by a ground shipping method. Tattu R-Line Version 4.0 1050mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2020. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races. What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries. There are different R-Line versions for the needs of different FPV racing competitions. Features    High quality, reliable power Stable automatic stacking technology enables single-cell capacities of 1050mAh Higher capacity than comparable size packs Very high C rate. Designed for professional FPV racing No memory effect. Local after-sales service (Located in Dublin, CA) Specifications Minimum Capacity: 1050mAh Configuration: 6S1P / 22.2V / 6 Cells Discharge Rate: 130C Max Burst Discharge Rate: 260C Charge Plug: JST-XHR Discharge Plug: XT60 Dimensions:78mm x 40mm x 34mm (L x W x H) Net Weight(±20g): 180g Includes 1x Tattu R-Line Version 4.0 22.2V 6S 1050mAh 130C LiPo Battery - XT60

    2 in stock

    $33.99

  • Walksnail Avatar HD Goggles X Walksnail Avatar HD Goggles X

    RaceDayQuads Walksnail Avatar HD Goggles X

    Out of stock

    After extensive market research and integration of user demands, introducing the Walksnail Avatar HD Goggles X! The Walksnail Avatar HD Goggles X stands to revolutionize the world of FPV goggles, boasting a long list of new features and improvements over its predecessor. The Avatar Goggles X is competing for the title of the most versatile FPV Goggles, with support for Walksnail, Analog, and even HDZero, all at a lower price!  The X in Walksnail Avatar HD Goggles X, means infinite possibilities, as Walksnail has designed this goggle for long-term use. Where the upper part of the goggles is removable, making sure the receiving module can be replaced so that you can maintain the latest technology without replacing the goggles every year. The goggles are designed to be lightweight, mini, small, and carry 50° FOV, making more comfortable for pilots while giving them a more immersive FPV experience. Features Weight 290g 2 to-6 diopter FOV 50° Lenses can be replaced 7-26V 1PD54~74mm Front cover DIY Infrared Sensing 1080P/100FPS Sharing mode HDMI input Replace VRX HDMI output Built-in Gyro (in development) AV in Built-in Bluetooth Wi-Fi module (in development) Preface About Goggles X Since the Walksnail Avatar Birth, Walksnail has always been constantly collecting market's feedback and suggestions. In the new generation of research and development, we fully consider each function for customers, like HDMI input and CVBS input (AV IN interface). Meanwhile, we have also optimized a wider pupil adjustment range, improved optical clarity, suitable for different people's face shapes, and Walksnail are committed to developing an app that supports wireless firmware updates, FC adjustment, social media sharing, without cumbersome computer operations. In order to reduce the user's cost of HD system, we designed the upper part of the goggles to be removable make sure the receiving module can be replaced, so that you can maintain the latest without replacing the goggles every year. The Avatar HD system utilizes industry-leading H.265 encoding technology to provide 1080p/100FPS FPV video quality with low latency, providing an immersive and responsive experience. The goggles have an AV IN interface and support analog signals, supporting a versatile solution for FPV pilots. The HDMI input expands the range of devices that can be used with the goggles, providing more flexibility and convenience. The HDMI OUT interface can be connected to other display devices to share your flight footage with pilots in real-time. The front cover of the goggles can be removed and replaced with new antenna, replacing the two antennas located under the goggles, which provides pilots with more options to optimize their FPV experience. The cover above the goggles can be opened for easy replacement of new receiver modules, providing pilots with a cost-effective way to upgrade their goggles. Meanwhile, we are developing the next-generation receiving module, which can achieve a breakthrough in flight distance, expected to reach 20 kilometers, and develop a sustainable development strategy. The front cover of the goggles adds a light function, add a touch of style to your gear. 100% optical improvement, experience a clearer picture.  Adjustable from +2.0 to -6.0 via diopter knob to personalize the viewing experience and easily go glasses-free. The goggles use infrared sensing technology to provide pilots with a convenient and energy-efficient way to turn the screen on and off without manually pressing any buttons. This feature helping to extend the life of the screen.  The front cover of the goggles can be DIY, allowing pilots to use their imagination to customize interesting looks for the goggles. Lenses for astigmatism, myopia and blue light-blocking glasses can be replaced to meet different vision needs. The goggles feature wide foam to provide pilots with a comfortable and secure fit regardless of different facial features, fits the face to reduce light leakage. The goggles are designed to be lightweight, mini, small, and carry 50°FOV, making them more comfortable for pilots while giving them a more immersive FPV experience. The goggles have built-in gyro hardware, which can be used to develop Fixed-wing, RC cars and other scenarios. The built-in Bluetooth Wi-Fi module allows pilots to connect their goggles to an app and access a range of features, including sharing their FPV experience on social media, wireless upgrading firmware, map mode for locating the drone, and live viewing goggles screen. This feature is around the corner. Specifications Communication Frequency: 5.725-5.850GHz Transmitter Power(EIRP): FCC:<30dBm; CE:<14dBm; SRRC:<20dBm; MIC:<25dBm I/O Interface: HDMI Out, HDMI Input, 5Pin 3.5mm Audio Port, DC5.5*2.1mm Port, Micro SD Card Slot  Transmission Resolution: 1080p 100fps, 1080p 60fps, 720p 100fps, 720p 60fps Code Rate: Max 50 Mbps Min. Latency: Average 22ms Average Gain: 2dBi Polarization: LHCP Transmission Distance: >4km Channel: 8 Screen Resolution: 1920x1080/100Hz Screen Material: OLED IPD Mechanical Range: 57mm-72mm Adjustable Focus Range: +2.0 to-6.0 Diopter FOV: 50° Power Input: 7-26V(2S-6S) SD card: Support 256G System: Avatar HD system Foam material: PU Built-in WIFI: Yes Built-in Gyro: Yes Built-in Bluetooth: Yes Includes 1x Walksnail Avatar HD Goggles X                             1x Goggle Foam (PU) 1x Lens cleaning cloth 1x XT60 to DC 5.5x2.1mm power cord 1x Storage Box

    Out of stock

    $458.99

  • Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version) Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)

    RaceDayQuads Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)

    37 in stock

    Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. Camera V2 delivers 2K pixels, a 4:3 native sensor for enhanced visuals, and a native 4:3 mode ratio so you can capture more of your surroundings in stunning detail. This kit includes the new VTX and camera, coming with 2 antennas. Warning - Walksnail recommends that when using more than 2s power to use a standalone BEC in between the VTX and power source to conserve the integrity of sensitive electronics.  Features Dual antennas Compatible 4K 1080P 120fps compatibility 22ms low latency Ranging Mode 4KM range Lightweight design FOV160° Built-in 32G storage,  Support Gyroflow 6V-25.2V The only native 4:3 high-definition sensor in the FPV industry The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency. Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. Meanwhile, it's a better fit for regular FPV races as well.   The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality. The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.    Updated the design of PCB board and shell, improved the quality of VTX, more durable. Optimized the installation place of the antenna, so as to better protect the VTX. The position of the frequency binding button has been changed to make the frequency binding operation more convenient. A spare pad is added to provide two power connection modes. New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology. Supports both high frame rate and standard frame rate, it has an average latency of 22ms with the high frame rate.  Designed to carry dual antennas to achieve more stable and powerful signals. The quality of the antenna is upgraded, and the working performance of the whole frequency band is more stable. Specification Camera Model: Avatar V2 camera Image Sensor: 1/3.2-Inch 4Mp 4:3sensor Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility; Ratio: 4:3 native /16:9 Lens: 2.1mm FOV: 160° Aperture: F2.0 Shutter: Rolling shutter Min.Illumination: 0.001Lux Weight: 7.2g Dimensions: 19x19x22mm Coaxial Cable: 140mm Gyroflow: Only 32G VTX Supported VTX Model: Avatar V2 module(Dual Antenna) Communication Frequency: 725-5.850GHz Transmitter Power (EIRP): FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm 1/O Interface: JST1.0x4(Power in)JST0.8x6(USB) Mounting Holes: 25.5x25.5mm; 20x20mm Dimensions: 33.5x33.5x10.5mm Storage: 32G Recording: 1080p/720p Weight: 15.4g Operating Temperature: -20-40℃ Channels: 8 Wide Power Input: 6V-25.2V Supported FC System: Betaflight; Inav; Fettec; ArduPilot; Kiss OSD: Canvas mode Latency: Average delay 22ms Antenna: 2(IPEX) Avatar V2 antenna Polarization: LHCP Bandwidth: 5600MHz-6000MHz Gain: 1.9dBi VSWR: ≤1.5 Input Impedance: 50Ω Interface: IPEX-1 Size: R15 X 45mm (without cable) Weight: 2g Includes 1x Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version) 1x USB transfer extension cable 1x 4 Pin silicone cable 8x M2x4mm screws 4x M2x5mm screws 4x M2x6mm screws 4x M2x14mm screws 4x M2x5x0.5mm gasket

    37 in stock

    $168.99

  • Walksnail Avatar HD Pro Kit

    RaceDayQuads Walksnail Avatar HD Pro Kit

    332 in stock

    The Micro Camera and VTX Combo for Fat Shark Dominator HDO3 are provided by WalkSnail.  The video transmitter for the Fat Shark Dominator HD Goggles and Walksnail Goggles has arrived! The Walksnail Avatar HD Pro Kit features a VTX with enhanced TVS protection and support for up to 6S. This VTX delivers unmatched stability due to the aid of being equipped with Gyroflow technology. This allows super smooth and stabilized video from your FPV system. The VTX is resistant to GPS interference with a wide input voltage range of 6V to 25.2V. This kit also features 1080P compatibility, high frame starlight, a 4KM range, and 32GB built-in storage option.  Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology! Warning - Walksnail recommends that when using more than 2s power to use a standalone BEC in between the VTX and power source to conserve the integrity of sensitive electronics.  Features Compatible with FatShark Dominator HD FPV Goggles Canvas mode and distance detection with the dual-antenna system Reliable digital HD video transmission (1080P – H.265 encoding) 1080P 120fps compatibility Sony Starvis Ⅱ Technology Built-in 32GB storage High frame starlight Lightweight design 22ms low latency Ranging Mode 4km range 6V-25.2V FOV 160°   AVATAR V2 VTX Specifications Communication Frequency: 5.725-5.850GHz Transmitter Power (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm 1/O Interface: JST1.0x4(Power in)JST0.8x6(USB) Mounting Holes: 25.5x25.5mm; 20x20mm Dimensions: 33.5x33.5x10.5mm Storage: 8G/32G Recording: 1080p/720p Weight: 17.6g Operating Temperature: -20-40℃ Channels 8 Wide Power Input: 6V-25.2V Supported FC System Betaflight; Inav; Fettec; ArduPilot; Kiss OSD Canvas mode Latency: Average delay 22ms Antenna: 1(IPEX) HD PRO CAMERA Resolution: 1080P/60fps;720P/120fps,720P/60fps;1080P/120fps compatibility; Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ Sensor Model: Avatar HD Pro camera Min.Illumination: 0.00001Lux Dimensions: 19x19x24mm Shutter: Rolling shutter Coaxial Cable: 140mm Ratio: 16/9; 4/3 Aperture: F1.6 Weight: 9.5g Lens: 8Mp FOV: 160° AVATAR V2 ANTENNA Polarization: LHCP Bandwidth: 5600MHz-6000MHz. Gain: 1.9dBi VSWR: ≤1.5 Input Impedance: 50Ω Interface: IPEX-1 Size: R15x45mm (without cable) Weight: 2g Includes USB transfer extension cable X1 4 Pin silicone cable X1 M2x4mm screws X8 M2x5mm screws X4 M2x6mm screws X4 M2x14mm screws X4 M2x5x0.5mm gasket X4

    332 in stock

    $158.89

Recently viewed products

© 2025 Caloosa Trains And Hobbies,

    Login

    Forgot your password?

    Don't have an account yet?
    Create account

    Reviews