TRA2075, Traxxas 2075 Digital High Torque Waterproof Servo
This is a replacement Traxxas Digital High Torque Waterproof Servo.
Specifications:
Torque: 125 oz-in
Speed: 0.17 sec/60°
This product was added to our catalog on April 20, 2021
TRA2075X, Traxxas 2075X High Torque Metal Gear Waterproof Digital Servo
This is a replacement Traxxas 2075X Digital High Torque Metal Gear Waterproof Servo. This servo is included with the TRX4 as standard equipment.
Features:
Metal Gear, Ball Bearing
Digital High-torque 125 oz-in.
Transit Time .17 sec/60°
L=55mm, H= 42.75mm, W=21.5mm
Fits:
Traxxas 4-Tec 3.0
Traxxas Drag Slash
Traxxas E-Revo VXL 2.0
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas TRX-4
Traxxas TRX-4
Traxxas Unlimited Desert Racer
This product was added to our catalog on April 14, 2021
TRA1844, Traxxas Large Servo Saver
This is a large servo saver from Traxxas. This servo saver mounts to the servo, and provides protection for your steering servo by allowing flex in the steering linkage during a crash.
This product was added to our catalog on September 7, 2021
TRA2085X, Traxxas X-Maxx/XRT Waterproof Digital High-Torque Servo
This is the Traxxas X-Maxx/XRT Waterproof Digital High-Torque Servo. This metal gear (ball bearing) waterproof servo also includes the servo saver spring and assembled steering link.The X-Maxx steering servo includes full metal gears and adds a massive 23% more torque to take on the most extreme environments. The kit also includes a stiffer servo saver spring and steel steering linkage for increased precision and control during high speed driving.
Accessory part for these models:
Maxx®
X-Maxx®
This product was added to our catalog on September 7, 2021
TRA2065R, Traxxas Servo Sub-Micro Waterproof Metal Gear
Servo, sub-micro, waterproof, metal gearThe 2065R waterproof sub-micro servo adds the superior durability of all-metal gears for the best driving experience possible.
Accessory part for these models:
1/18 LaTrax® Desert Prerunner
1/18 LaTrax® Rally
1/18 LaTrax® Teton®
Summit
TRX-4M™ 1/18 Ford® Bronco®
TRX-4M™ 1/18 Land Rover® Defender®
TRX-4® 1979 Chevrolet® Blazer®
TRX-4® 1979 Ford® Bronco®
TRX-4® Chevrolet® K10 High Trail Edition™
TRX-4® Equipped with Traxx®
TRX-4® Ford® Bronco®
TRX-4® Ford® F-150® High Trail Edition™
TRX-4® Land Rover® Defender®
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
This product was added to our catalog on September 7, 2021
TRA8247X, Traxxas TRX-4 Metal Steering Servo Horn
Traxxas TRX-4 Metal Steering Servo Horn. This is the optional sintered metal servo horn. Package includes one horn and one 3x14 button head screw.
This servo horn is compatible with any standard servo featuring a 25 tooth spline.
This product was added to our catalog on September 7, 2021
TRA2255, Traxxas 400 High Torque Metal Gear Waterproof Brushless Servo (Red) (High Voltage)
The Traxxas 400 High Torque Metal Gear Waterproof Brushless Servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit.
The Power to Perform
With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.
Waterproof Not "Water Resistant"
Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.
For TRX-4 Installation
The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit (TRA2262) and a steel servo horn (TRA8247X) is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.
NOTE:
*Compatible with most Traxxas 1/10 scale electric models
Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn
Compatible with Traxxas nitro models using rechargeable 5-cell battery packs
Not recommended for X-Maxx
Features:
Factory fit for drop-in installation into Traxxas Models
Fully waterproof, not “water resistant”
Compatible with Traxxas Stability Management™ (TSM)
400 oz-in torque at 6.0V
0.15 sec/60° at 6.0V
Metal gears
Dual ball bearings
Brushless motor technology
Aluminum center case
Specifications:
Motor Type: Brushless
Operating Voltage: 6.0 - 7.4V DC
Speed: 0.15 sec/60° at 6.0V
Torque: 400 oz-in at 6.0V
Weight: 64g
Gears: Metal
Output Spline: 25T
Case: Plastic top/bottom, anodized aluminum center
Controller: Digital
This product was added to our catalog on April 12, 2021
Servo, sub-micro, waterproof
TRA2065A, SERVO SUB-MICRO WATERPROOF
Replacement part for these models:
1/18 LaTrax® Desert Prerunner
1/18 LaTrax® Rally
1/18 LaTrax® Teton®
Summit
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® 2021 Ford® Bronco
TRX-4® Mercedes-Benz® G 500® 4X4²
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
Accessory part for these models:
TRX-4® Equipped with Traxx®
TRX-4® Sport Unassembled Kit
TRX-4® Sport
This product was added to our catalog on September 7, 2021
TRA2018, Traxxas 2018 Plastic Gear Standard Servo
This is a Traxxas 2018 Plastic Gear Standard Servo. This servo is used in a variety of Traxxas models, including the Villain EX boat, Stampede, Rustler, Jato, T-Maxx and Revo trucks, as well as the Nitro 4-Tec.
Specifications:
Length: 1.59"
Width: 0.77"
Height: 1.58"
Torque: 42.0 oz-in
Transit Time: 0.22 seconds/60°
Weight: 1.5 oz
This product was added to our catalog on May 7, 2021
2250 - Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
TRA2250, SERVO 330 HIGH TORQUE CORELESS
This product was added to our catalog on September 7, 2021
TRA2270 High-Torque Metal Gear ServoThe new waterproof, high-torque 2270 servo is the perfect upgrade for single-servo 1/10 scale vehicles. With 236 oz-in of torque on tap and full metal gears, the 2270 servo provides a significant performance boost over the standard 2075 servo lineup and fits in the same applications.*This new high-torque servo represents a substantial upgrade in steering authority for TRX-4, Slash, and a variety of other Traxxas models–all at an affordable price! #2270 High-Torque Metal Gear Servo Torque @ 6.0v: 236 oz-inSpeed @ 6.0v: 0.175 sec./60°WaterproofAll metal gearsFull ball bearingsOversized Brushed Motor55 mm L x 44.5 mm H x 20 mm W
