Pro-Line Parts & Accessories

170 products


  • PRO1013113, Pro-Line Traxxas X-Maxx Badlands MX43 Pro-Loc Pre-Mounted All Terrain Tires (MX43) w/Impulse Pro-Loc Wheels (Black) (2) PRO1013113, Pro-Line Traxxas X-Maxx Badlands MX43 Pro-Loc Pre-Mounted All Terrain Tires (MX43) w/Impulse Pro-Loc Wheels (Black) (2)

    Pro-Line PRO1013113, Pro-Line Traxxas X-Maxx Badlands MX43 Pro-Loc Pre-Mounted All Terrain Tires (MX43) w/Impulse Pro-Loc Wheels (Black) (2)

    2 in stock

    PRO1013113, Pro-Line Traxxas X-Maxx Badlands MX43 Pro-Loc Pre-Mounted All Terrain Tires (MX43) w/Impulse Pro-Loc Wheels (Black) (2) The Pro-Line Badlands MX43 Pro-Loc All Terrain Tire is the ultimate tire solution for X-MAXX owners. Pro-Line Badlands take the Motocross inspired tread and elevate the look a Bigger and Bolder knobby tread that matches modern MX tires. These tires have been developed from the ground up for extreme X-MAXX punishment with an all-new ultra-durable compound that prevents tire ballooning even at high speeds. Pro-Line X-MAXX Impulse Pro-Loc Black Wheels feature a ground breaking Bead-Loc design that allows users to change tires or foams when necessary without worrying about the tires coming out of the bead. Pro-Line’s proprietary Pro-Loc Technology brings this feature to life and creates an ultra-secure bond between Pro-Line’s Pro-Loc Tires and Pro-Line’s Impulse Pro-Loc Wheels. The reinforced Tire bead of Pro-Line’s Pro-Loc Tires fits into a uniquely shaped channel on the wheel and the bead-loc screws actually pass through the tire rubber before being pinched by the outer bead-loc ring to create the maximum possible mounting security. Features: Tires Incredible Traction on Any Surface Ultra-Durable and Anti-Ballooning Tire Compound Aggressive Motocross-Inspired Appearance Reinforced Tire Bead Proprietary Pro-Loc Technology for Secure Tire Mounting Pairs perfectly with Pro-Line’s Impulse Pro-Loc wheels for X-MAXX® Foam Inserts Included Made in the USA, since 1982 Wheels Ground Breaking Pro-Loc Mounting Technology Change Tires or Foams and Re-use the Wheels Tough, Blacked-out Impulse Wheel styling Extra Thick, Extremely Durable to Take Serious X-MAXX® Abuse Stone Gray Bead-Loc Rings Stand Out from the Crowd Pairs perfectly with Pro-Line’s Badlands MX43 Pro-Loc Tires Made in the USA, since 1982 This product was added to our catalog on May 16, 2021

    2 in stock

    $99.99

  • PRO603100, Pro-Line Pro-Bond CA Tire Glue (0.7oz) PRO603100, Pro-Line Pro-Bond CA Tire Glue (0.7oz)

    Pro-Line PRO603100, Pro-Line Pro-Bond CA Tire Glue (0.7oz)

    3 in stock

    PRO603100, Pro-Line Pro-Bond CA Tire Glue (0.7oz) This is a 0.7 ounce bottle of Pro-Line Pro-Bond CA Tire Glue. Pro-Line’s Pro-Bond Tire Glue has a hold strength of 3,200 PSI (Test Method: Steel on Steel in Tensile Shear) which is the highest strength of any tire glue available. Pro-Line’s unique glue formula also provides the fastest drying glue possible while drying crystal clear with no yellowing or whitening found when gluing tires with other glues. The Pro-Line development team did not just stop with improving the glue. Pro-Line Engineers began the design process with the clear goal of revolutionizing the glue delivery system (bottle and applicator tip).The Pro-Line Pro-Bond Tire Glue features a super soft and squeezable round bottle that improves feel as you apply the glue, with the added benefit of the round bottle being significantly more stable on your pit table when compared to the elliptical shape found in all other glue bottles. The single biggest advancement of the Pro-Bond Tire Glue system is the translucent yellow Pro-Bond applicator tips. The tips are specifically intended around Pro-Line’s exclusive round bottle design and snap into place for a secure fit while gluing. The Pro-Bond applicator tips are re-usable unlike the throw-away tubes and have the perfect size applicator hole for gluing tires. Features: Custom Glue Formula Specifically Designed for Maximum Bond with Tires Super-Fast and Crystal Clear Drying Maximum Strength Bond – 3,200 PSI Holding Strength Unique Super Soft Round Bottle for Optimum Feel and Stability Re-Usable Snap Fit Yellow Pro-Bond Applicator Tips Includes: (1) Pro-Bond Tire Glue (0.7oz/20g) (2) Pro-Bond Yellow Applicator Tips This product was added to our catalog on April 18, 2023

    3 in stock

    $14.99

  • Sale -12% PRO1015910, Pro-Line Trencher Low Profile 2.8" Tires w/Raid Rear Wheels (2) (Black) (M2) w/12mm Removable Hex PRO1015910, Pro-Line Trencher Low Profile 2.8" Tires w/Raid Rear Wheels (2) (Black) (M2) w/12mm Removable Hex

    Pro-Line PRO1015910, Pro-Line Trencher Low Profile 2.8" Tires w/Raid Rear Wheels (2) (Black) (M2) w/12mm Removable Hex

    8 in stock

    Product Details Whether it is loose or hard-packed dirt, sand, snow, street or gravel the Trencher LP 2.8" tire is up to the task. The Trencher tread was designed to have ultimate traction combined with long-lasting durability. Fits:  Stampede® 2wd Stampede® 4x4 Rustler® 2wd Rustler® 4x4 JATO® Rear Key Features Ridiculous Amounts of Traction and Side-to-Side Stability Low Profile Tire Size That is Perfect for the Rustler® Over-sized Tread is Second-to-None in Durability and Longevity Removable Hexes Allow you to Change Wheel Offsets on the Fly Great for Sand, Snow, Street, Gravel and Loose or Hard Packed Dirt In The Box Pre-mounted Trencher LP 2.8" Tires on Raid Black 6x30 Removable Hex Wheels (2 pcs) 6x30 to 12mm Hex Adapters (Narrow & Wide) (2 pcs of each) M3 x 12mm long SHCS hardware (12 pcs)

    8 in stock

    $51.24$44.99

  • PRO10197203, Pro-Line Front Runner 2.2/2.7" Narrow Front Drag Tires (2) (S3) PRO10197203, Pro-Line Front Runner 2.2/2.7" Narrow Front Drag Tires (2) (S3)

    Pro-Line PRO10197203, Pro-Line Front Runner 2.2/2.7" Narrow Front Drag Tires (2) (S3)

    1 in stock

    PRO10197203, Pro-Line Front Runner 2.2/2.7" Narrow Front Drag Tires (2) (S3) The Pro-Line Front Runner 2.2/2.7" Narrow Front Drag Tires are a performance driven tire that will aid acceleration by removing some excess rotational mass. These wheels have been designed to be as narrow and lightweight as possible, all without taking away from the scale appearance. The outer bead is a standard 2.2", while the inner bead is a 2.7". When combined with the Front Runner Wheels (PRO280303), expect nothing but performance and great scale looks. NOTE: Requires the use of Front Runner wheels (PRO280303). Features:  All-new Ground up Design for Maximum Performance Super Narrow and Lightweight Eliminates the Need for Tire Foam Maintains Scale Appearance Made in the USA Specifications: Scale: 1/10 Tire Tread: Front Runner Tire Tread: Front Runner Package Type: Tires Only Track Surface: Drag Racing Inner Diameter: 2.2 Product Width: 0.7" (18 mm) Product Height: 3.18" (81 mm) Tire Compound: Soft Includes:  (2) Front Runner 2.2" Drag Tires This product was added to our catalog on October 4, 2021

    1 in stock

    $26.99

  • PRO10188203, Pro-Line Reaction+ HP Belted Wide Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) PRO10188203, Pro-Line Reaction+ HP Belted Wide Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3)

    Pro-Line PRO10188203, Pro-Line Reaction+ HP Belted Wide Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3)

    3 in stock

    PRO10188203, Pro-Line Reaction+ HP Belted Wide Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) Pro-Line Reaction+ HP Belted Wide Drag Slick 2.2/3.0 SCT Rear Tires are about 20% wider than the original Reaction HP tire for massively improved grip off the line, which can mean the difference between victory or defeat. Once you reach full throttle, you can have 100% confidence in the stability of this tire because it is belted with an extra wide belt that wraps further into the corners of the tire to prevent any expansion. The Reaction+ tire is so wide that it will not fit standard width SC wheels, so Pro-Line engineers developed a Wide SC wheel specifically for use with the Reaction+ HP - the Showtime+ Wide SC Wheel (PRO2794-03). Just like the original, the Reaction+ is made from Pro-Line's soft S3 compound, which is a proven winner taking the win and the top 4 spots at the 2021 King of the Streets drag race in Las Vegas. Just like all of Pro-Line's tires, they are proudly Made in the USA! NOTE: Reaction+ HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. For the Reaction+ HP Wide SC tires that is 90 mph or about 7,000 RPM. Over revving your Reaction+ HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. Features: Nearly 20% Wider than the Original Reaction HP Tire Massively Improved Grip Off the Line – the Difference Between Victory or Defeat Extra Wide Molded-in Belt Provides Incredible Stability at High Speed Wide SC Format Tire only fits Pro-Line Wide SC wheels like the Showtime+ Wide SC wheel (2794-03) Specifically Made for No-prep Drag Racing Made from Pro-Line’s Winning S3 compound Belted Slicks Give You Control to Put the Power Down Soft Foam Inserts Included Made in the USA, since 1982  Specifications: Height: 4.15" (105mm) Width: 2.12" (54mm) Includes: (2) Reaction+ HP Wide SC Drag Racing BELTED Tires  (2) Soft Foam Inserts  This product was added to our catalog on August 10, 2021

    3 in stock

    $40.00

  • PRO2803-03, 1/10 Showtime Front Runner Front 2.2"/2.7" 12mm Drag Wheels (2) Black PRO2803-03, 1/10 Showtime Front Runner Front 2.2"/2.7" 12mm Drag Wheels (2) Black

    Pro-Line PRO2803-03, 1/10 Showtime Front Runner Front 2.2"/2.7" 12mm Drag Wheels (2) Black

    Out of stock

    PRO2803-03, 1/10 Showtime Front Runner Front 2.2"/2.7" 12mm Drag Wheels (2) Black Fits: Losi® 22S™ No Prep Drag Car (LOS03035/LOS03041) Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203) Slash® 2wd Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203) AE DR10 Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203) Slash® 4x4 Front with Pro-Line's Front Runner 2.2"/2.7" Tires (PRO10197203) The Pro-Line Showtime Front Drag Racing Wheels with 12mm Hex are a performance driven wheel that will aid acceleration by removing some excess rotational mass. These wheels have been designed to be as narrow and lightweight as possible, all without taking away from the scale appearance. The outer bead is a standard 2.2", while the inner bead is a 2.7". When combined with the Pro-Line Front Runner Tires (PRO10197-203), expect nothing but performance and great scale looks. NOTE: Requires the use of the Pro-Line Front Runner Tires (PRO10197-203).Features: Scale Spoke Pattern Mimics Full-Size Drag Wheels Perfect fit for the Pro-Line's Front Runner Tires (PRO10197-203) Super Narrow and Lightweight Eliminates the Need for Tire Foam Made in the USA Specifications: Scale: 1/10 Wheel Type: Showtime Front Runner Wheel Position: Front Package Type: Wheels Only Track Surface: Drag Racing Wheel Hex Size: 12mm Outer Diameter: 2.2" (56 mm) Product Height: 3.04" (77 mm) Product Width: 0.55" (14 mm) Includes: (2) Showtime Front Runner Wheels This product was added to our catalog on July 4, 2021

    Out of stock

    $14.00

  • PRO1017611, Pro-Line 1/5 Masher X HP Belted Pre-Mounted Monster Truck Tires (Black) (2) (M2) w/24mm Hex PRO1017611, Pro-Line 1/5 Masher X HP Belted Pre-Mounted Monster Truck Tires (Black) (2) (M2) w/24mm Hex

    Pro-Line PRO1017611, Pro-Line 1/5 Masher X HP Belted Pre-Mounted Monster Truck Tires (Black) (2) (M2) w/24mm Hex

    Out of stock

    PRO1017611, Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck Tires (Black) (2) (M2) w/24mm Hex Arrma Kraton 8S BLX Arrma Outcast 8S BLX Traxxas X-Maxx Traxxas XRT Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck Tires are a lightweight, belted tire option for X-MAXX and KRATON 8S trucks. Pro-Line Masher X HP tires are BELTED to handle extreme power and high speeds with ease. No tire ballooning here!  The Raid 5.7" Black Wheel features a 24mm hex with the standard 1/5 scale through-hole to fit most 1/5 scale vehicles and includes machined aluminum wheel washers to fit onto the popular X-MAXX platform. Inspired by popular full-size off-road wheels, the Raid 5.7" wheel is extremely tough and has the bold style to match. The Masher X HP tires are made from Pro-Line's legendary M2 compound for unmatched grip on the dirt, street, grass, and gravel. This tire and wheel package is proudly manufactured at Pro-Line Headquarters in the USA!  NOTE: Masher X HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. Over revving your Masher X HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires.* Features: Highest Performance Large Scale Tire and Wheel Combo Ever Conceived Lightweight, BELTED and eXtremely Durable Futurist Chevron Monster Truck Style Tread and Sidewall Detail BELTED Tire Handles eXtreme Power and High Speeds with Ease 24mm Hex with Standard 1/5 Scale Through Hole to Fit Most Large-Scale Vehicles Machined Aluminum Wheel Washers Included to Fit the X-MAXX Platform Legendary M2 Tire Compound for Maximum All-Terrain Traction Foam Inserts Included Made in the USA, Since 1982 Fits KRATON™ 8S, X-MAXX® and Other Large Scale Vehicles with 24mm Hex Specifications: Product Height: 8.2" (208 mm) Product Weight: 724g (1.59lbs.) Product Width: 3.77" (96 mm) Scale: 1/5 Tire Compound: M2 (Medium) Wheel Hex Size: 24mm This product was added to our catalog on November 30, 2021

    Out of stock

    $89.99

  • PRO10170203, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) PRO10170203, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3)

    Pro-Line PRO10170203, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3)

    5 in stock

    PRO10170203, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires feature a High-Performance herringbone weave pattern Belt molded inside the tire. These belted slick Drag Racing tires were specifically made for no-prep Drag racing and will not balloon or expand during use, giving you more control when you are putting down the power! The Reaction HP SC tires provide the incredible grip that you expect from Pro-Line but will also provide unmatched stability. Just like all of Pro-Line's tires, they are proudly Made in the USA! NOTE: Reaction HP tires have a maximum speed rating that, if exceeded, could result in permanent damage to the internal belt. For the Reaction HP SC tires that is 90 mph or about 7,000 RPM. Over revving your Reaction HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires. Features: Molded-in High-Performance Herringbone Weave Pattern Belt Reaction HP Tire Will Not Balloon or Expand During Use Specifically Made for No-prep Drag Racing Available in Soft S3 and the Super Soft Ultra Blue compound to provide incredible grip Belted Slicks Give You Control to Put the Power Down Soft Foam Inserts Included For use with Pro-Line 2.2"/3.0" Wheels like the Pomona Drag Specific Wheel Made in the USA, since 1982 Specifications: Height: 4.15" (105mm) Width: 1.80" (46mm) Includes: (2) Reaction HP SC 2.2"/3.0" Drag Racing BELTED Tires  (2) Soft Foam Inserts  This product was added to our catalog on November 21, 2021

    5 in stock

    $38.99

  • PRO277603, Pro-Line Pomona Drag Spec Rear Drag Racing Wheels (2) w/12mm Hex (Black) PRO277603, Pro-Line Pomona Drag Spec Rear Drag Racing Wheels (2) w/12mm Hex (Black)

    Pro-Line PRO277603, Pro-Line Pomona Drag Spec Rear Drag Racing Wheels (2) w/12mm Hex (Black)

    Out of stock

    PRO277603, Pro-Line Pomona Drag Spec Rear Drag Racing Wheels (2) w/12mm Hex (Black) Pro-Line 2WD Pomona Drag Spec Rear Drag Racing Wheels are high-performance and perfectly styled drag wheels for no-prep SC drag racing. The Pomona wheels were specifically made for no-prep Drag racing and are a perfect fit with Pro-Line's Hoosier Drag 2.2/3.0 Rear Tires! The Pomona wheels are strong and lightweight 12mm hex wheels making them the ideal choice for performance drag racing. The wheel spoke design mimics what you would find at the Pomona Drag Strip on any given race weekend and will complete the look of your build. The Pomona wheel offset is ideal for 2wd Slash trucks converted to no-prep Drag Racing cars, which has exploded in popularity. The Pomona Drag Spec wheel and every other wheel that Pro-Line makes is proudly Made in the USA. Features: 2.2" Front Wheel Design Ideal for No-Prep SC Drag Racing Perfect Size for Pro-Line's Hoosier Drag 2.2/3.0 Drag Tires Scale Spoke Detail, Just Like at the Pomona Drag Strips Strong and Lightweight for Maximum Performance 12mm hex Wheel for Use with Slash® 2wd Made in the USA, since 1982 Includes: (2) Pomona Drag Spec 2.2/3.0" Black Rear Wheels  This product was added to our catalog on August 1, 2021

    Out of stock

    $17.99

  • PRO1016810, Pro-Line Trencher HP Belted 2.8" Pre-Mounted Truck Tires (M2) (2) (Black) w/Raid Rear Wheels PRO1016810, Pro-Line Trencher HP Belted 2.8" Pre-Mounted Truck Tires (M2) (2) (Black) w/Raid Rear Wheels

    Pro-Line PRO1016810, Pro-Line Trencher HP Belted 2.8" Pre-Mounted Truck Tires (M2) (2) (Black) w/Raid Rear Wheels

    2 in stock

    PRO1016810, Pro-Line Trencher HP Belted 2.8" Pre-Mounted Truck Tires (M2) (2) (Black) w/Raid Rear Wheels This is a pair of Pro-Line Trencher Belted 2.8" M2 Compound Tires, Pre-Mounted on Raid Rear Wheels. Pro-Line is proud to introduce the History making Trencher HP 2.8" BELTED All Terrain Truck Tires! Pro-Line has developed the technology to mold a High-Performance herringbone weave pattern Belt inside of the relentless, tall and grippy tread of the Trencher HP. These are not your average belted tires! Made for All Terrain bashing, the Trencher HP 2.8" tires will not balloon or expand during use and will still provide the incredible grip that you expect from Pro-Line tires due to the soft M2 compound. Just like all Pro-Line's tires, they are proudly Made in the USA! Just like the original Trencher 2.8" tire, the next generation Trencher HP 2.8" is destined to become the ultimate, go-to Bash tire for your truck! The Belted Trencher HP 2.8" tires come Pre-Mounted on the next generation 2.8" wheel design from Pro-Line, the Raid 2.8" Removable Hex Wheel! Imagine being able to easily change the offset of your wheel to fit different applications by simply changing out the hex! You can go from the included 12mm narrow offset (2wd Stampede®/Rustler® Rear) to the included 12mm wide offset hexes (2wd Stampede®/Rustler® Front and 4x4 Stampede®/Rustler® Front and Rear) quickly and easily. Also, imagine being able to replace a damaged wheel hex without needing to replace your glued tires (PRO6335-00 Replacement Hexes). You can even upgrade your wheels to 17mm wheel hexes (PRO6336-00 Sold Separately) or go for Aluminum hex adapters for extreme bashing fun! These Raid 2.8" wheels accomplish all of this and more by using Pro-Line's unique 6x30 interlocking hex design that is secured to the wheel by 6 M3 screws that are spaced 30mm across. The built-in adjustability and ease of use make this a must-have wheel for bashers everywhere! Be the first to own the latest and greatest technology from Pro-Line, get the Trencher HP 2.8" Belted tires now! PLEASE NOTE: The Trencher HP tires are not meant to be extreme speed run tires and have achieved up to 75 mph or about 5,000 RPM under ideal conditions in testing. Over revving your Trencher HP tires could result in breaking the internal belt, which will NOT be covered under manufacturer warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires. Features: Tires:     Molded-in High-Performance Herringbone Weave Pattern Belt Trencher HP Tire Will Not Balloon or Expand at High Speed Horizontal H Shaped Tread for Ridiculous Amounts of Traction and Stability Over-sized Tall Tread is Second-to-none in Durability and Longevity Perfect for 2.8" Monster Trucks Extremely Detailed Sidewall Design for that Tough Off-Road Look Optimum Handling, Durability and Longevity Made in the Legendary M2 Compound Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheels: Removable Hexes Allow you to Change Wheel Offsets on the Fly Easily Replace Damaged Hexes or Upgrade to 17mm hexes The 2 Most Common 12mm Offsets are Included Fits any of Pro-Line's 6x30 Removable Wheel Hexes Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 4.87" (123.7mm)      Width: 2.86" (72.64mm) What's Included: (2) Pre-mounted Trencher HP 2.8" Belted Tires on Raid Black 6x30 Removable Hex Wheels (2 of each) 6x30 to 12mm Hex Adapters (Narrow & Wide) (12) M3 x 12mm long SHCS hardware Fits: Stampede 2wd Stampede 4x4 Rustler 2wd Rustler 4x4 JATO Rear This product was added to our catalog on May 7, 2021

    2 in stock

    $59.99

  • PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2) PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2)

    Pro-Line PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2)

    18 in stock

    PRO117810, Pro-Line Badlands 3.8" Pre-Mounted Truck Tires (2) (Black) w/Raid Wheels (M2) The Badlands 3.8" tires now come Pre-Mounted on the next generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires. These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The hexes are included and are also available separately (PRO6345-00). The built-in adjustability and ease of use make this a new must-have wheel for bashers everywhere. Arrma Kraton 6S BLX HPI Savage Flux HP HPI Savage X HPI Savage XL Team Associated MGT Traxxas Revo Nitro Traxxas Summit 1/10 Traxxas T-Maxx Features: Tire: Readers' Choice Award Winning Tread Design Aggressive Tire Design Tire Based on Motocross Tread Technology Large Tire Lugs for the Ultimate in Tire Durability Made in the USA, since 1982 Wheel: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 5.85" (149mm) Width: 2.72" (69mm) Includes: (2) Pre-Mounted Badlands 3.8" Tires on Raid Black 8x32 Removable Hex Wheels (2) 8x32 to 17mm 1/2" Offset Hex Adapters (16) M3 x 12mm long SHCS hardware This product was added to our catalog on August 14, 2021

    18 in stock

    $59.99

  • PRO1017003, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (Ultra Blue) PRO1017003, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (Ultra Blue)

    Pro-Line PRO1017003, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (Ultra Blue)

    Out of stock

    PRO1017003, Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires (2) (Ultra Blue) Pro-Line Reaction HP Belted Drag Slick 2.2/3.0 SCT Rear Tires feature a High-Performance herringbone weave pattern Belt molded inside the tire. These belted slick Drag Racing tires were specifically made for no-prep Drag racing and will not balloon or expand during use, giving you more control when you are putting down the power! The Reaction HP SC tires provide the incredible grip that you expect from Pro-Line but will also provide unmatched stability. Just like all of Pro-Line's tires, they are proudly Made in the USA! NOTE: Reaction HP tires have a maximum speed rating that, if exceeded, could result in permanent damage to the internal belt. For the Reaction HP SC tires that is 90 mph or about 7,000 RPM. Over revving your Reaction HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free-spinning tire or tires.  Features: Molded-in High-Performance Herringbone Weave Pattern Belt Reaction HP Tire Will Not Balloon or Expand During Use Specifically Made for No-prep Drag Racing Available in Soft S3 and the Super Soft Ultra Blue compound to provide incredible grip Belted Slicks Give You Control to Put the Power Down Soft Foam Inserts Included For use with Pro-Line 2.2"/3.0" Wheels like the Pomona Drag Specific Wheel Made in the USA, since 1982 Specifications: Height: 4.15" (105mm) Width: 1.80" (46mm) Includes: (2) Reaction HP SC 2.2"/3.0" Drag Racing BELTED Tires  (2) Soft Foam Inserts  This product was added to our catalog on May 12, 2022

    Out of stock

    $38.99

  • PRO279403, Pro-Line Showtime+ Wide Drag Spec Rear Drag Racing Wheels (2) w/12mm Hex (Black) PRO279403, Pro-Line Showtime+ Wide Drag Spec Rear Drag Racing Wheels (2) w/12mm Hex (Black)

    Pro-Line PRO279403, Pro-Line Showtime+ Wide Drag Spec Rear Drag Racing Wheels (2) w/12mm Hex (Black)

    1 in stock

    PRO279403, Pro-Line Showtime+ Wide Drag Spec Rear Drag Racing Wheels (2) w/12mm Hex (Black) Pro-Line Showtime+ Wide Drag Spec Rear Drag Racing Wheels are a perfect fit for Pro-Line's new Reaction+ HP Wide SC tires (PRO10188-203), but this wheel is also designed to fit standard width 2.2"/3.0" SC tires using the extra inner bead channel. Showtime+ wheels are strong and lightweight 12mm hex wheels making them the ideal choice for performance drag racing. The wheel offset is ideal for Losi 22S No Prep Drag Car, 2wd Slash trucks converted to no-prep Drag Racing cars and the AE DR10. The Showtime+ Wide SC Drag wheel and every other wheel that Pro-Line makes is proudly Made in the USA. Features: Wide SC Format Wheel Perfect Size for Pro-Line's Reaction+ HP Wide SC Tires (PRO10188-203) Also fits Standard Width 2.2"/3.0" SC tires Using the Extra Inner Bead Channel Scale Spoke Detail that Mimics Full-Size Drag Wheels Strong and Lightweight for Maximum Performance 12mm Hex Wheel for Use with Losi® 22S™ No Prep Drag Car, Slash® and AE DR10 Made in the USA, since 1982 Specifications: Height: 3.22" (82mm) Width: 1.90" (48mm) Includes: (2) Showtime+ Wide SC / Standard SC 2.2"/3.0" Black Rear Wheels  This product was added to our catalog on June 21, 2021

    1 in stock

    $14.99

  • PRO607000, Extended Front and Rear Body Mounts: Slash 2WD PRO607000, Extended Front and Rear Body Mounts: Slash 2WD

    Pro-Line PRO607000, Extended Front and Rear Body Mounts: Slash 2WD

    Out of stock

    PRO607000, Extended Front and Rear Body Mounts: SLH 2WD

    Out of stock

    $25.00

  • PRO608700, Extended Front and Rear Body Mounts:SLH 4x4 PRO608700, Extended Front and Rear Body Mounts:SLH 4x4

    Pro-Line PRO608700, Extended Front and Rear Body Mounts:SLH 4x4

    5 in stock

    PRO608700, Extended Front and Rear Body Mounts:SLH 4x4

    5 in stock

    $17.99

  • PRO607002, Pro-Line Extended Body Mount Thumbwasher Kit (4) PRO607002, Pro-Line Extended Body Mount Thumbwasher Kit (4)

    Pro-Line PRO607002, Pro-Line Extended Body Mount Thumbwasher Kit (4)

    13 in stock

    PRO607002, Pro-Line Extended Body Mount Thumbwasher Kit (4) This is a replacement Pro-Line Body Mount Thumbwasher Kit, and is intended for use with the Traxxas Slash, Slash 4x4 and Team Associated SC10 equipped with the optional Pro-Line Extended Body Mount Set. Includes: (4) Thumb Washers (4) Set screws (4) O-Rings This product was added to our catalog on October 25, 2021

    13 in stock

    $9.99

  • PRO6345-00, Pro-Line 8x32 to 17mm 1/2" Offset Hex Adapters (2) PRO6345-00, Pro-Line 8x32 to 17mm 1/2" Offset Hex Adapters (2)

    Pro-Line PRO6345-00, Pro-Line 8x32 to 17mm 1/2" Offset Hex Adapters (2)

    10 in stock

    PRO6345-00, Pro-Line 8x32 to 17mm 1/2" Offset Hex Adapters (2) The Pro-Line 8x32 to 17mm 1/2" Offset Aluminum Hex Adapters are intended for use with Pro-Lines 8x32 3.8" removeable hex wheels and are made from High-strength, Durable DuPont Black Nylon Material. Features: Replace your 8x32 3.8" 17mm Hexes Built to Take a Beating Made from High-strength, Durable DuPont Nylon Material Includes 4 Hexes Per Set Made in the USA, since 1982 Includes: (4) 8x32 to 17mm 1/2" Offset Hex Adapters  This product was added to our catalog on August 8, 2021

    10 in stock

    $9.99

  • PRO637900, Pro-Line X-Maxx 1/5 Aluminum Adapter Washer (4) (Blue) PRO637900, Pro-Line X-Maxx 1/5 Aluminum Adapter Washer (4) (Blue)

    Pro-Line PRO637900, Pro-Line X-Maxx 1/5 Aluminum Adapter Washer (4) (Blue)

    9 in stock

    PRO637900, Pro-Line X-Maxx 1/5 Aluminum Adapter Washer (4) (Blue) Pro-Line X-Maxx 1/5 Aluminum Adapter Washer. These optional wheel adapters are great for fitting 1/5 sized wheels to the Traxxas X-Maxx axles. Using these will expand the wheel and tire selection you have for your X-Maxx. Package includes four wheel adapters. Features: Machined Aluminum for a Factory Look Blue Anodized Increase your X-MAXX Wheel Selection Options Allows other 1/5 wheels to fit on X-MAXX Specifications: Application: X-MAXX Vehicle Type: Monster Truck Color: Blue Material: Aluminum Accessory Type: Wheel Adapter Scale: 1/5 Inner Diameter: 18mm to 12mm This product was added to our catalog on May 6, 2021

    9 in stock

    $12.99

  • PRO829812, Pro-Line Mini-B Front Pre-Mounted Wedge Carpet Tire (Yellow) (2) (Z3) PRO829812, Pro-Line Mini-B Front Pre-Mounted Wedge Carpet Tire (Yellow) (2) (Z3)

    Pro-Line PRO829812, Pro-Line Mini-B Front Pre-Mounted Wedge Carpet Tire (Yellow) (2) (Z3)

    16 in stock

    PRO829812, Pro-Line Mini-B Front Pre-Mounted Wedge Carpet Tire (Yellow) (2) (Z3) Pro-Line Mini-B Front Pre-Mounted Wedge Carpet Tires feature the iconic hook shaped pins found on the 1/10 size tires. This will provide you with the steering you need while not being too grabby. These front tires are Pre-Mounted to lightweight and durable narrow front carpet racing wheels for the Losi Mini-B chassis. Just like Pro-Line's other Velocity wheels, they feature the latest in style and performance with a reversed dish design that protects the nut and axle from damage during collisions. Package includes two pre-mounted tires. Features Iconic Hook Shaped Pins Provide the Steering you Need on Carpet Made from a Special Carpet Racing Compound Tires Conveniently Pre-Mounted to Mini-B Yellow Front Wheels Specifications: Scale: 1/16 Wheel Hex Size: 8mm Product Height: 2.32" (59 mm) Product Width: 0.78" (20 mm) Accessory Type: Wheels Vehicle Type: Buggy Wheel Position: Front Tire Tread: Wedge Compound/Hardness: Medium Front or Rear: Front Package Type: Pre-Mounted This product was added to our catalog on October 6, 2021

    16 in stock

    $24.99

  • PRO10158203, Pro-Line Hoosier Drag 2.2" Front Tires (2) (S3) PRO10158203, Pro-Line Hoosier Drag 2.2" Front Tires (2) (S3)

    Pro-Line PRO10158203, Pro-Line Hoosier Drag 2.2" Front Tires (2) (S3)

    Out of stock

    PRO10158203, Pro-Line Hoosier Drag 2.2" Front Tires (2) (S3) Pro-Line Hoosier Drag 2.2" Front Tires were specifically made for no-prep RC Drag racing! The Hoosier Drag Front tires not only look amazingly Scale, they perform just like the full-size tires, so you can have realistic style and performance on your SC Drag car. And just like the full-size Hoosier tires, these Drag Slicks proudly display White Hoosier Logos on the sidewall! These tires are available in Pro-Line's Soft, yet very durable S3 compound or the more stable MC clay compound and fit 2.2" 2wd Buggy Front Wheels. The Hoosier Drag Front tire and every other tire that Pro-Line makes is proudly Made in the USA. Features: Officially Licensed Hoosier Drag Slick Tire Design White Hoosier Logos Proudly Displayed on Sidewall Exact Scale Detail Specifically Made for No-prep Drag Racing Combine with the Hoosier Drag Slick Rear Tires to Complete the Look Available in Soft S3 Compound or the More Stable MC Clay Compound Soft, Re-usable and Water-proof Closed Cell Foam Inserts Included For use with 2WD Front Buggy Wheels Made in the USA, since 1982 Specifications: Height: 3.18" (81mm) Width: 1.05" (27mm) Includes: (2) Hoosier Drag Front 2.2" Tires  (2) Closed Cell Foam Inserts This product was added to our catalog on May 3, 2021

    Out of stock

    $25.00

  • PRO633500, 6x30 to 12mm Hex Adapters (Nrw&Wde) for 6x30 Whls

    Pro-Line PRO633500, 6x30 to 12mm Hex Adapters (Nrw&Wde) for 6x30 Whls

    7 in stock

    PRO633500, 6x30 to 12mm Hex Adapters (Nrw&Wde) for 6x30 Whls

    7 in stock

    $11.99

  • PRO1010110, Pro-Line Pre-Mounted Sling Shot (Desperado) (2) (1/16 E-Revo) (Black) PRO1010110, Pro-Line Pre-Mounted Sling Shot (Desperado) (2) (1/16 E-Revo) (Black)

    Pro-Line PRO1010110, Pro-Line Pre-Mounted Sling Shot (Desperado) (2) (1/16 E-Revo) (Black)

    9 in stock

    PRO1010110, Pro-Line Pre-Mounted Sling Shot (Desperado) (2) (1/16 E-Revo) (Black) This is a pack of two Pro-Line Sling Shot Tires, Pre-Mounted on Black Desperado Wheels. The Sling Shot provides hours of fun in the sand, snow or even in the occasional mud pit. The 12 paddle design ensures maximum performance due to the true scoop design coupled with low roll outer sidewalls. Plus, Pro-Line makes using high performance, long lasting fun tires easier than ever by offering the Sling Shot tires pre-mounted to the Desperado wheels! The wheel features a wider offset, that will make your truck more stable and handle bumps and jumps like a champion. Pro-Line’s 6-spoke Desperado wheel will make your truck the toughest looking one on the block. The wheel is a one-piece wheel made out of extremely durable nylon material and features a molded in bead-loc ring for an awesome scale look. This is a 12mm hex wheel and it will make your truck stand out from the rest! Features: Ready to Sling Sand and Snow Scale 12-Paddle tread design for Awesome Looks and Performance Tires also available unmounted Lightweight 1-piece wheel Wide offset wheel that improves stability and performance Awesome scale look Wheel also available unmounted Made in the USA, since 1982  Specifications: Height: 3.85" (98mm) Width: 1.68" (43mm) Includes: (2) Sling Shot 2.2” Paddle Tires mounted on Desperado Wheels This product was added to our catalog on March 18, 2021

    9 in stock

    $31.99

  • PRO632501, RC Body Paint - Black

    Pro-Line PRO632501, Pro-Line RC Body Airbrush Paint (Black) (2oz)

    Out of stock

    PRO632501, Pro-Line RC Body Airbrush Paint (Black) (2oz)

    Out of stock

    $9.99

  • PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels

    Pro-Line PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels

    4 in stock

    PRO1016610, Pro-Line Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires (2) (Black) (M2) w/Raid Wheels This is a set of two Pro-Line Black MX38 Badlands HP Belted 3.8" Truck Tires, Pre-Mounted on Raid wheels. Pro-Line Badlands tires are known for having a noticeable Motocross inspired tread and the updated Badlands MX38 HP tires improves on this with and even Bigger and Bolder knobby tread. The Badlands MX38 is a true All-Terrain tire that will find traction on any surface but is best suited for loose and loamy dirt, mud or grass. Pro-Line has used a refined processes to mold a High-Performance herringbone weave pattern Belt directly inside of the Badlands MX38 HP tires that will prevent the tire from ballooning or expanding during use. This design gives maximum control to put the power down even at high speeds. Quit wasting tires and lay down the power with a clear conscious. The Badlands MX38 HP 3.8" tires provide the incredible grip that you expect from Pro-Line due to the soft M2 compound and the aggressive Motocross inspired tread. In response to customer demand, Pro-line has designed an updated tire size to fit the current generation of Monster Trucks and the MX38 HP delivers at 3.48" wide and 6.8" tall. Features: Tire: Molded-in High-Performance Herringbone Weave Pattern Belt Aggressive Motocross Inspired Tread Design Badlands MX38 HP 3.8" tires Will Not Balloon or Expand During Use Soft M2 Compound Provides Incredible Grip on a Variety of Surfaces Belted Tires Give You Control to Put the Power Down Tire Size comes in at 3.48" wide and 6.8" tall Soft Foam Inserts Included Made in the USA, since 1982 Wheel: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Specifications: Height: 6.80" (173mm) Width: 3.48" (88mm) Includes: (2)  Badlands MX38 HP Belted 3.8" Pre-Mounted Truck Tires on Raid wheels Fits: Arrma Kraton 6S BLX HPI Savage Flux HP HPI Savage X HPI Savage XL Tekno RC MT410 Traxxas Revo Nitro Traxxas Summit 1/10 Traxxas T-Maxx This product was added to our catalog on March 4, 2021

    4 in stock

    $74.99

  • PRO10176-11, Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck MTD Tires (Black) (2) w/24mm Hex PRO10176-11, Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck MTD Tires (Black) (2) w/24mm Hex

    Pro-Line PRO10176-11, Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck MTD Tires (Black) (2) w/24mm Hex

    Out of stock

    PRO10176-11, Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck MTD Tires (Black) (2) w/24mm Hex Pro-Line 1/6 Masher X HP Belted Pre-Mounted Monster Truck Tires are a lightweight, belted tire option for X-MAXX and KRATON 8S trucks. Pro-Line Masher X HP tires are BELTED to handle extreme power and high speeds with ease. No tire ballooning here! The Raid 5.7" Black Wheel features a 24mm hex with the standard 1/5 scale through-hole to fit most 1/5 scale vehicles and includes machined aluminum wheel washers to fit onto the popular X-MAXX platform. Inspired by popular full-size off-road wheels, the Raid 5.7" wheel is extremely tough and has a bold style to match. The Masher X HP tires are made from Pro-Line's legendary M2 compound for unmatched grip on the dirt, street, grass, and gravel. This tire and wheel package is proudly manufactured at Pro-Line Headquarters in the USA! NOTE: Masher X HP tires have a maximum speed rating that, if exceeded, could result in permanently damaging the internal belt. Over-revving your Masher X HP tires could result in breaking the internal belt, which will NOT be covered under warranty. This can be caused by "diffing out" your tires or holding the throttle open while one, two or three of your tires are stopped, which substantially increases the RPM sent to the free spinning tire or tires.* Features: Highest Performance Large Scale Tire and Wheel Combo Ever Conceived Lightweight, BELTED and extremely Durable Futurist Chevron Monster Truck Style Tread and Sidewall Detail Belted Tire Handles Extremes Power and High Speeds with Ease 24mm Hex with Standard 1/5 Scale Through Hole to Fit Most Large-Scale Vehicles Maximum All-Terrain Traction Easily Replace Damaged Hexes Made from High-strength, Durable DuPont Nylon Material Raid Wheel with Replaceable 24mm Hexes to fit KRATON 8S or X-MAXX Made in the USA, Since 1982 Specifications: Scale: 1/6 & 1/5 Inner Tire / Outer Wheel Diameter: 5.7" Wheel Hex Size: 24mm Track Surface: All-Terrain Width: 3.77" (96mm) Height: 8.2" (208mm) Weight: 724g (1.59lbs) Approx. Includes: (2) Masher X HP Belted 5.7"Tires Pre-Mounted on Black Raid with 24mm wheels hex (2) KRATON 8S 8x48 24mm Wheel Hexes (2) X-MAXX 8x48 24mm Wheel Hexes (16) M3x16 Socket Head Screws Compatibility Arrma Kraton 8S BLX Arrma Outcast 8S BLX Traxxas X-Maxx Traxxas XRT This product was added to our catalog on June 16, 2023

    Out of stock

    $94.99

  • PRO2811-04, Pro-Line Raid Bead-Loc 2.2/3.0" Short Course Wheels (Red/Black) (2) w/12mm & 14mm Removable Hex PRO2811-04, Pro-Line Raid Bead-Loc 2.2/3.0" Short Course Wheels (Red/Black) (2) w/12mm & 14mm Removable Hex

    Pro-Line PRO2811-04, Pro-Line Raid Bead-Loc 2.2/3.0" Short Course Wheels (Red/Black) (2) w/12mm & 14mm Removable Hex

    15 in stock

    PRO2811-04, Pro-Line Raid Bead-Loc 2.2/3.0" Short Course Wheels (Red/Black) (2) w/12mm & 14mm Removable Hex Pro-Line Raid Bead-Loc 2.2/3.0" Short Course Wheels with 12mm & 14mm Removable Hex. This pair of short course wheels feature the use of Pro-Line 6x30 removable hex and a secure 6-bolt bead-loc ring. Included with these wheels are hex options with varying offsets: 12mm Traxxas Slash Front, Slash Rear/4x4 Front or Rear, Pro-Trac (0-offset) and 14mm for Arrma vehicles. Using the 6x30, these wheels are also compatible with the optional aluminum 6x30 hexes, creating even more offset and hex size options. Features: One-sided Bead-Loc captures Both Sides of the Tire Evenly with No Glue Necessary Removable Hexes for Quick Wheel Offset Changes Raid 10-spoke Wheel Design Mimics Full-size Offroad Wheels Includes Slash Front, Slash 2wd Rear/4x4, Pro-Trac (0 Offset), and 14mm Hexes Easily Replace Damaged Hexes Specifications: Scale: 1/10 Inner Tire / Outer Wheel Diameter: 2.2/3.0 in Vehicle Type: Short Course Truck Wheel Type: Raid Wheel Hex Size: 12mm or 14mm Color: Red Includes: (2) Raid 2.2/3.0" 6x30 Removable Hex SC Wheels (2) Bead-Loc Sleeves (2) Die Cast Bead-Loc Rings (2) 6x30 to 12mm Hex Adapters (2) 6x30 to 12mm Hex Adapters (2) 6x30 to 12mm Hex Adapters (2) 6x30 to 14mm Hex Adapters (24) M3 x 12mm BHCS hardware This product was added to our catalog on March 22, 2022

    15 in stock

    $37.49

  • Sale -17% PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car

    Pro-Line PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car

    Out of stock

    PRO358800, 1/10 1970 Pontiac GTO Judge Clear Body: Drag Car Fits: Losi® 22S™ No Prep Drag Car (LOS03035 & LOS03041) Slash® 2wd Drag Car AE DR10

    Out of stock

    $64.99$54.00

  • PRO1013203, Pro-Line Hyrax 2.2" Rock Terrain Crawler Tires w/Memory Foam (2) (Predator) PRO1013203, Pro-Line Hyrax 2.2" Rock Terrain Crawler Tires w/Memory Foam (2) (Predator)

    Pro-Line PRO1013203, Pro-Line Hyrax 2.2" Rock Terrain Crawler Tires w/Memory Foam (2) (Predator)

    6 in stock

    PRO1013203, Pro-Line Hyrax 2.2" Rock Terrain Crawler Tires w/Memory Foam (2) (Predator) This is a pack of two Pro-Line Hyrax 2.2" Rock Terrain Crawler Tires with included Open Cell Memory Foams. Designed from the ground up for maximum grip on the toughest terrain, the Hyrax tire is ready for anything the Race might throw at you. The Hyrax features an aggressive and open tread pattern with each tread block containing multiple Sipes for incredible tread flex. The highly detailed connected tread on the sidewall of the Hyrax extends out for unmatched side-hilling performance. The Hyrax also features futuristic stepped tread blocks that create even more forward gripping edges that dig into slick rock like no other scale tire Pro-Line has produced to date! The Hyrax is made from Pro-Line’s Legendary G8 material, so you know it provides performance you can depend on. Features: Ground up Design for Maximum Performance Highly Detailed Sidewall for Scale Looks Stepped Blocks & Multiple Sipes Create Unmatched Grip Tackle tough terrain in Scale Style Made in the Legendary G8 Material Made in the USA, since 1982 Specifications: Height: 5.75" (146mm) Width: 2.15" (55mm) Includes: (2) Hyrax 2.2” G8 Rock Terrain Truck Tires (2) Open Cell Foam Inserts This product was added to our catalog on July 18, 2021

    6 in stock

    $39.95

  • PRO1012812, Pro-Line Hyrax 1.9" Tires w/Impulse Wheels (Black/Silver) (2) (Predator) w/12mm Hex PRO1012812, Pro-Line Hyrax 1.9" Tires w/Impulse Wheels (Black/Silver) (2) (Predator) w/12mm Hex

    Pro-Line PRO1012812, Pro-Line Hyrax 1.9" Tires w/Impulse Wheels (Black/Silver) (2) (Predator) w/12mm Hex

    Out of stock

    PRO1012812, Pro-Line Hyrax 1.9" Tires w/Impulse Wheels (Black/Silver) (2) (Predator) w/12mm Hex Pro-Line Hyrax 1.9" Tires are now available mounted on Impulse Black/Silver internal Bead-Loc wheels. Designed for maximum grip on the toughest terrain, the Hyrax tire is ready for anything your Scale Adventure might throw at you. The Hyrax features an aggressive and open tread pattern with each tread block containing multiple Sipes for incredible tread flex. The highly detailed connected tread on the sidewall of the Hyrax extends out for unmatched side-hilling performance. The Hyrax also features futuristic stepped tread blocks that create even more forward gripping edges that dig into slick rock like no other scale tire Pro-Line has produced to date! The Hyrax is available in either the legendary G8 material or the super soft Predator compounds. The Hyrax 1.9" tires come conveniently pre-mounted to Pro-Line’s Impulse Black/Silver Plastic 1.9" Wheels that are Proudly Made in the USA! These Impulse wheels are designed to not only look scale but to be super easy to use by only requiring 6 screws per wheel for mounting tires. The unique 3-piece plastic wheel design bolts together in the back and locks on to any of Pro-Line's incredible list of 1.9" Crawling Tires. The back of this 12mm hex Rock Crawling 1.9" wheel also accepts Pro-Line's Brass Brake Rotor Weights (sold separately) for additional looks and performance. Features: Tire: Designed for Maximum Performance Highly Detailed Sidewall for Scale Looks Stepped Blocks & Multiple Sipes Create Unmatched Grip Tackle Tough Terrain in Scale Style Available in the G8 compound or Predator compound Made in the USA, since 1982 Wheel: Popular Impulse Wheel Style Blacked out Wheel with Silver Painted Faux Rings 12mm Hex 3-piece Plastic Wheel Design Molded in Bead-loc Ring and Lug Nuts for a Scale Look Wheel Made from High-Strength, Durable DuPont Nylon Accepts optional Brass Brake Rotor Weights (sold separately) Specifications: Height: 4.73" (120mm) Width: 1.76" (45mm) This product was added to our catalog on November 8, 2021

    Out of stock

    $42.99

  • PRO10157203, Pro-Line Hoosier Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) PRO10157203, Pro-Line Hoosier Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3)

    Pro-Line PRO10157203, Pro-Line Hoosier Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3)

    6 in stock

    PRO10157203, Pro-Line Hoosier Drag Slick 2.2/3.0 SCT Rear Tires (2) (S3) Pro-Line Hoosier Drag Slick 2.2/3.0 SCT Rear Tires were developed specifically for no-prep RC Drag racing! These Hoosier Drag Slick tires not only look amazingly scale, they perform just like the full-size tires, so you can have realistic style and performance on your SC Drag car. And just like the full-size Hoosier tires, these Drag Slicks proudly display White Hoosier Logos on the sidewall! These tires are available in Pro-Line's Soft, yet very durable S3 compound or the more stable MC clay compound. The Hoosier Drag Slick tire and every other tire that Pro-Line makes is proudly Made in the USA.  Features: Officially Licensed Hoosier Drag Slick Tire Design White Hoosier Logos Proudly Displayed on Sidewall Exact Scale Detail Specifically Made for No-prep Drag Racing Combine with the Hoosier 2.2" Drag Front Tires to Complete the Look Available in Soft S3 Compound or the more Stable MC Clay Compound Soft, Re-usable and Water-proof Closed Cell Foam Inserts Included For use with Pro-Line 2.2"/3.0" Wheels Made in the USA, since 1982 Specifications: Height: 4.15" (105mm) Width: 1.80" (46mm) Includes: (2) Hoosier Drag Slick SC 2.2"/3.0" Tires  (2) Closed Cell Foam Inserts This product was added to our catalog on May 13, 2019

    6 in stock

    $30.99

  • PRO635400, 6x30 to 12mm SC Hex Adapters for 6x30 SC Whls

    Pro-Line PRO635400, 1/10 6x30 to 12mm SC Hex Adapters

    23 in stock

    PRO635400, 1/10 6x30 to 12mm SC Hex Adapters Product Details Do you need replacement plastic 6x30 to 12mm Slash® SC Hex Adapters for your Pro-Line 6x30 Removable Hex SC Wheels? You came to the right place! This pack contains a pair of 12mm Slash® 4x4 Front/Rear (Slash® 2wd and AE DR10 Rear) hexes and a pair of 12mm Slash®