7.4V nominal voltage for use with existing Fat Shark goggles and fits into head strap like standard Fat Shark battery packs. Large capacity when used with high capacity cells (batteries not included).
Batteries should be removed and charged via a dedicated 18650 style charger.
Check out RDQ's goggle battery here.
Check out our Lithium Ion Cells & Chargers all our FPV Goggles and Accessories!
Includes
1x 18650 Li-Ion Battery Case for FatShark Goggles
This product is the checker only. It does not include cables.
This battery checker takes the guesswork out of wondering what levels your Whoop Batteries are at! A much needed accessory for any FPV pilot.
Check out our other 1S Battery Chargers and Accessories!
Features
Accepts both types of the plugs 2.0 JST female and 1.25 JST female
Battery voltage detection, reverse connection protection.
Does not check HV batteries - only normal 3.7v
Includes
1x 1S LiPo Whoop Battery Checker - PH2.0 and JST 1.25
This LED strip is 6.5" long and contains 24 addressable LEDs. High quality LEDs put on a quality strip means that your quad will look very good for a long time to come! The strip can be cut into any length you desire. Here at RDQ, we like to cut this into 4x 6 LED strips and put them under each arm of the quad.
Check out all our LEDs!
Specifications
Input voltage: 5V
Length: 6.5"
Includes
1x 24 LED Strip - 5V High Density LEDs for FPV Racing
Featuring a whoop camera with Smart Audio! Take your Whoop tech to the next level.
Check out all our Camera/VTX AIOs & Combos
Features
Super light weight: 4.3g, all in one vtx + camera + antenna
One button frequency and power setup
Support 0.01mW parameter-adjusting mode
0.01/25mW/50mW/100mW/200mW power switchable
OSD configuration using FC Uart (F3/F4/F7 with OSD)
Notice: 5645,5925,5945(E4,E7,E8) channels are not available due to FCC regulation.
Specifications
Input voltage: 3.2-5.5V
Weight: 4.3g(exclude antenna)
Frequency: 5.8GHz 5 bands 40 channels
Includes
1x AKK AIO-SA Whoop/Micro AIO FPV Camera & 25-200mW VTX w/ Smart Audio
The AKK FX3 Ultimate is essentially the mini version of the AKK FX2. With a 20x20 profile, it can easily fit into any of your 20x20 builds while having a high max output power and Smart Audio capability.
Details:
Support Pit Mode
25mW, 200mW, 400mW and 600mW power switchable
One button frequency and power setup
OSD configuration using Smart audio
7-24V input with 5V output
MMCX+UFL connector
MIC
Note: Smart Audio is not compatible with KISS flight controllers.
FPV REGULATORY NOTICE
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. RDQ cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
in AKK's newest VTX which has built-in DVR, Smart Audio, up to 6s (7 - 26v) direct Lipo input, adjustable power output (25, 200, 600 & 1000 mW) w/ pit mode, and a 5v cam power output.
Check out the rest of our selection of VTX's!
Specifications
Brand name: AKK
Item name: Infinite DVR VTX
Input voltage: 7V to 26V
Extra features: Smart audio DVR
Power supply: 5V output for camera
Output power: 25/200/600mW/1000mW
Antenna connector: MMCX
Cable connector: Solder pads
Records Video Size: VGA (640*480)
Max Support TF Card: 32G
Dimension: 36x36mm, 30.5 stackable hole
Weight: 8.8g (excluding antenna)
Features
Support Smart audio
25/200/600/1000mW power switchable
One button frequency and power setupOSD configuration using smart audio
7-26V input with 5V output for camera
With MIC
Notice: 5645/5925/5945 (E4/E7/E8) are not available due to FCC regulation. Selecting 5645/5925/5945 (E4/E7/E8) will be invalid action.
Note: 37 channels are all above 5650 and below 5925MHz, which are legal to use in the USA with an amateur radio license.
This equipment is being sold under FCC’s amateur radio rules.
Operators must require amateur radio license to operator legally in
the US. Use of amateur equipment without a license or use of
equipment on restricted frequencies could subject the operator to
significant fines by the FCC.By purchasing this equipment, the user is
agreeing that they understand these responsibilities and will operate
the equipment legally. More information related to ARL, please go to
http://www.arrl.org/getting-licensed.Pacakge Included:
1x VTX
1x pigtail
1x cable
FPV REGULATORY NOTICE
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. RDQ cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
Revised version now includes a power switch and additional solder pads.The Analog FPV FatShark Module Adapter V2 for DJI Digital FPV Goggles fits so well you can use a fat shark or various third-party fat shark style analog video receivers modules! It transfers video and audio signals to the high-quality screen of DJI FPV goggles for viewing or recording. This compact and lightweight adapter is easy to install and won't void your warranty! Check out all our DJI compatible frames, electronics & accessories and our FPV receiver modules & antennas collection!Specifications
Input Voltage: 2S-4S (DC5.5x2.1mm)
Internal Voltage: 5V 3A (with pad output)
Output Voltage: 2S-4S (DC 5.5x2.1mm)
Signal Input: Standard Fat Shark Receiver Port
Including third-party receivers: Realacc, Furious, etc.
Signal output: standard audio / video
Power Switch
Dimension: 48x28x12mm
Weight: 10g (without extension cable)
Includes
1x Analog FPV Adapter for DJI Goggles
1x Adapter mounting board and screws
1x Audio and video cable
1x Power cable
Wiring Diagram
V3 now includes a voltage display, power switch and additional solder pads.This analog fat shark module adapter fits on the side of your DJI Digital FPV Goggles so you can use a fat shark or various third-party fat shark style analog video receivers modules! It transfers video and audio signals to the high-quality screen of DJI FPV goggles for viewing or recording. This compact and lightweight adapter is easy to install and won't void your warranty! We also have the V2 Adapter if you don't need the voltage display. Seen below installed in the Aluminum Case we carry specifically for this device:Check out all our DJI compatible frames, electronics & accessories and our FPV receiver modules & antennas collection!
Specifications
Input Voltage: 2S-4S (DC5.5x2.1mm)
Internal Voltage: 5V 3A (with pad output)
Output Voltage: 2S-4S (DC 5.5x2.1mm)
Signal Input: Standard Fat Shark Receiver Port
Including third-party receivers: Realacc, Furious, etc.
Signal output: standard audio / video
Dimension: 55x28x12mm
Weight: 13g (without extension cable)
Includes
1x Analog FPV Adapter V3 for DJI Goggles
1x Adapter mounting board and screws
1x Audio and video cable
1x Power cable
1x Allen Key
Wiring Diagram
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
After many designs and prototypes, the Armattan Beaver Frame 5" Quadcopter Frame Kit is here! The Armattan Beaver features a strong carbon frame with thicker arms than previous versions which makes it the strongest to date. This frame focuses on noise reduction, easy maintenance, and versatility for use with a variety of electronics. With a weight of 126g, this frame is lighter than previous Armattan frames.
Check out our other 5" frames, as well as the rest of our Armattan selection!
Features
Ease of maintenance: Only one bolt needs to be removed to replace an arm at the field
Well-balanced frame (strength and weight distribution)
Great price point for a high-end, freestyle frame
Thicker arms than any other previous frame
Light and small camera cage
Easy to tune for newcomers
Strong, stiff and light frame
Crash-protection provisions
Good-looking frame
Lifetime warranty
Noise reduction
Versatile
Specifications
Stack Mounting: Two 30.5x30.5mm stacks(center and rear) + Two 20x20mm stacks (4 possible positions)
FPV Camera Mount: 20mm(DJI) or 19mm Micro cam
Motor Mount Pattern: 16x16 or 16x19 or 19x19mm
Warrantied Parts: All CF and alumi frame parts
Main Plate Thickness: 2.5mm
Frame Shape: Compressed X
Frame Weight: 126 grams
Max Stack Height: 25mm
Motor to Motor: 235mm
Arm Thickness: 5mm
Includes
Carbon Fiber
1x 2mm bottom plate
1x 2.5mm main plate
4x 5mm arms 5 inch
1x 2mm top plate
1x 4mm arm core
Hardware
4x M3 25mm profiled alumi standoff
5x M3 20mm button head iron bolt
6x Aluminum cone spacer orange
5x M3 6mm nylon standoff F/F
20x M3 6mm 12.9 grade bolt
5x M3 10mm 12.9 grade bolt
5x M2 2.5mm cup head bolts
2x M3 20mm alumi standoff
9x M3 12mm cup head bolt
3x M3 16mm cup head bolt
5x M2 18mm cup head bolt
5x M2 nylon washer
14x M3 nylon nuts
5x M2 nylock
Metal
1x Right aluminum cam brace orange
1x Left aluminum cam brace orange
2x Aluminum tail posts orange
2x Aluminum cam saver black
Foam
4x Dog bone landing pads
1x Air unit foam
1x Center foam
1x Lite grip
Accessories
1x 25cm clear heat-shrink 20mm wide
4x Motor wire extension PCB
1x Universal antenna mount
2x White lipo strap
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
Introducing the Armattan Bobcat. 4 inch models are making a come back on the FPV scene. This frame supports a Vista, DJI air unit and DJI O3 Air Unit. This frame can become a compressed X frame or a True X frame depending on how you install the arms. A one of kind frame, brought you by the master frame makers at Armattan.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Features
Dual arms configurations
Front and Rear stack mounting
Re-designed camera cage making it lighter and stronger
Specifications
Frame Weight: 57 grams
Motor to Motor: 182mm (Compressed X)
Motor to Motor: 200mm (True X)
Frame Shape: True X or Compressed X (Modular)
Main Plate Thickness: 2.5mm
Arm Thickness: 3mm
Motor Mount Pattern: 12x12 or 9x9mm
Stack Mounting: Dual M3 20x20mm & M2 16x16mm
FPV Camera Mount: 20mm(DJI) or 19mm Micro cam
Max Stack Height: 20mm
Includes
1x Armattan Bobcat HD 4" Frame Kit
2x Cam Brace
2x Anchor
2x Tail Post
4x Arms 4 inch
1x Center Plate
1x Top Plate
2x Camera Mounting Plate
2x Tie Plate
1x M3 12mm cage standoff
2x M2 20mm cage standoff
5x M2 8mm cup-head bolt
3x M3 12mm button-head bolt (12.9 grade)
3x M3 8mm button head bolt (12.9 grade)
10x M2 6mm cup-head bolt
12x M3 9mm button head bolt
15x M3 sunk nuts
5x M3 20mm bolts
10x M3 nylon nuts
5x M3 6mm nylon standoffs
5x M2 18mm cup-head bolt
5x M2 aluminum nylocks
5x M2 nylon washer
5x M2 metal washer
3x M3 8mm cup-head bolt CW
1x Oomph spacer
2x Lipo strap
1x Top Lite Grip (gel & adhesive foam hybrid pad)
1x Air unit double sided adhesive foam bits
2x Dog-bone landing pads (cuts into 6 pieces, two center pieces can be used as spares)
1x Molded rubber antenna holder
All Armattan warranty claims must be handled directly through Armattan. Please follow this link with instructions on how to file for a warranty claim. https://armattanquads.com/warranty-claims/
The Gecko is Armattan's best mini-freestyle frames boasting innovative grip, style & protection. 6-axis titanium milling provides smooth finish & metal camera saver protects cam in crashes. 19mm micro cameras (SD & HD) fit. M2 & M3 board options & 22mm deck height for balanced gravity. Rubber VTX antenna guide & aluminum standoffs safeguard carbon frame. Covered by Armattan's lifetime warranty.
Check out the rest of our 4" frames, as well as the rest of our Armattan selection!
Specifications
Frame Weight: 45g
Motor to Motor: 174mm
Frame Shape: Compressed-X
left & Right: 137mm
front & rear: 107mm
Main Plate Thickness: 3mm
Motor Mount Pattern: 14XX motor pattern
Front Stack Mount: M2, 20x20mm (for HD cam board)
Rear Stack Mount: M3 20x20mm (for FC stack)
FPV Camera Mount: Micro compatible
Max Stack Height: 22mm
Motor Mounting: 12x12mm
Includes
1x Armattan Gecko HD 4" Frame Kit
2x Camera-cage braces
8x 6mm button-head M3 bolts
4x 4mm button-head M3 bolts
4x 16mm buton-head M3 bolts
2x 5mm cup-head M2 bolts
2x M3 sunk nuts
2x Camera-saver braces
1x 19.1mm Front standoff (silver)
2x Rear standoffs (black)
4x M3 nuts
2x Washers
1x 2mm Top (LiPo) plate
1x 3mm Main plate (4 inch)
1x Lipo strap
1x LiPo foam pad
4x Dog-bone landing pads
1x Molded rubber VTx antenna holder
Introducing the Armattan Odonata, the smallest FPV frame we have ever produced. But do not let the small size fool you. This model was designed and put through testing phases by a young engineering student, pilot and designer based in New York. His name is Kai Lin, aka Craftedkwads. We figured it was best to let him describe this frame so here's what he has to say about it.
The Odonata is a nano drone that fits in your pocket, rips like a boss, and hums like a dragonfly (true to its namesake). Fits through the tiniest of gaps, and makes worlds out of small spots.
1.5mm thick carbon fiber plates make for great durability, and the custom delrin standoffs are almost half the density of the standard aluminum ones (while retaining the needed strength), making the Odonata one of the lightest frames on the market, in a class where weight is the #1 priority. Fully thought out, the Odonata offers proper motor protection, camera protection, and build durability. A top mounted battery makes for easy access, and optimal flight characteristics.
The Odonata captures the essence of whoops and boosts their performance, durability, and ease of use. With a nearly identical wheelbase, the Odonata has a not-so-identical amount of performance, versatility and fun, however. It's a better flyer.
For those of you who can print your own parts, you can find the .stl files here.
Check out our other Micro frames, as well as the rest of our Armattan selection!
Armattan Lite Disclaimer
Armattan Lite frames are not lifetime warrantied; they are built for a different purpose. They will, however, be priced accordingly (read: very competitively). Armattan Lite will offer spare parts for cheap and continue to support one of the original visions of the company; to keep guys in the air without milking them for replacements.
Includes
1x 1.5mm Main Plate
1x 1.5mm Top Plate
8x M2 5mm Iron Cup Head Bolts
4x M2 10mm Iron Cup Head Bolts
8x M2 Nylon Nuts
4x Delrin M2 15mm Standoff
1x Cam Mount for Foxeer Razer Pico
4x Rubber Bands
1x Antenna Tube
2x Landing Dogbone pads
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The AtomRC Dolphin Plane Kit is a durable lightweight plane with molded EPP embedded with carbon fiber tubes. Features include a detachable nose and wings, integrated GoPro mount, fuselage protector, and other cool features!
This is a kit you will need a receiver, battery, ESC, motor, and FPV system.
Find the FPV PNP and PNP versions here!
Browse the rest of our Wing Gear!
Features
845mm wingspan
EPP molded , embedded with carbon fiber tubes, durable and lightweight.
Carbon fiber tubes help keep wings rigid during flight
Detachable wing, easy to transport.
Detachable nosecone for GoPro mounting
V tail design for added stability
Pre-installed wing and fuselage protector for durability
Compatible with GoPro Hero 5-7.
Movable battery slot for “CG” adjustment.
Pre-installed camera and VTX antenna cable for FPV gear.
Air inlet and outlet for FPV gear cooling.
Specifications
Wingspan: 845mm
Length: 710mm
Propeller recommend: 5~6 inch
Battery recommend : 4S 1300-2200mah
Dimension: 660*225*135mm
Includes
1 x Dolphin Kit
1 x Ball Push/Push Rod
1 X Sticker
1 x Battery Strap
1 x Camera Cable
1 x SMA to UFL VTX cable
1 x Screws
Diagram
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The AtomRC PNP Dolphin Plane is a durable lightweight PNP plane with molded EPP embedded with carbon fiber tubes. This has everything you need to fly, just add an RX and and FPV system. Features include a detachable wings and nose, fuselage protector, integrated GoPro mount, and other cool features!
Unlike most PNP planes, you will have to install the included electronics.
Find the Kit version here!
Browse the rest of our Wing Gear!
Features
845mm wingspan
EPP molded , embedded with carbon fiber tubes, durable and lightweight.
Detachable wing, easy to transport.
Carbon fiber tubes help keep wings rigid during flight
V tail design for added stability
Detachable nosecone for GoPro mounting
Air inlet and outlet for FPV gear cooling.
Compatible with GoPro Hero 5-7.
Pre-installed wing and fuselage protector for durability
Movable battery slot for “CG” adjustment.
Air inlet and outlet for FPV gear cooling.
Specifications
Wingspan: 845mm
Length: 710mm
Dimension: 660*225*135mm
Propeller recommend: 5-6 inch
Battery recommend : 4S 1300-2200mah
Includes
1x Dolphin KIT
1x 2306 Motor
1x ATOMRC Exceed 9g Servo
Diagram
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
This lightweight, dual motor glider is sure to get you maximum flight time! This quiet and efficient wing is great for beginners or even the most experienced aviators!
We also sell this wing without the FPV system, for line of sight flying, or adding your own custom FPV setup.
Check out all our PNP wings, as well as our AtomRC selection!
Features
Compact size(only 650 wingspan), swift and durable, easy for beginners
The special designed 2 in 1 ESC and VTX makes the electronics wiring clean
Come with PNP/FPV version, all part is installed, no need glue or soldering anymore
Sub 250g design, makes the glider fly without regulation, also easy to fly in the park and small area
Specifications
Wingspan: 650mm
Length: 570mm
Material: EPP
Wing Area: 6.15 dm²
Recommend motor: 1105 5000KV
Recommend prop: 3016-3 Blade
Recommend battery: 3S 750mah
Servo: 4.3g servos
Includes
1x Pre-built plane
1x ATOMRC Exceed 2in1 BLS 10A ESC (Bulid in 5V BEC,Input 2~4s.)
2x 1105 5000KV Motor
4x 4.3G Digital Servo
4x 3016-3 Propeller
1x ATOMRC TX500 VTX
1x Foxeer Razer Nano 1200TVL 14mm CAM
1x 5.8G Antenna
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The AtomRC RTH Dolphin V1.1 is a 845mm wingspan V-tail plane. The Dolphin can fly stable at high and low speeds, and the large fuselage offers lots of space to install the electronics. The detachable wing made the wing easy to transport, V tail made the Wing more stable for cruising. This wing has a black body with white accents and stickers to further style your craft. This wing will come with an AtomRC F405 NAVI FC, allowing you to use the Return To Home(RTH) feature as the RTH version can come right back to you and land. It's good to know about the flight controller having the ability to use two firmware INAV or Arduplane, both firmware's already pre-turned for the plane. This wing comes as a pre-built kit, PNP, pre-tuned, and with all electronic are pre-installed. This wing is perfect for beginners and stress free for veterans.
Note: You are going to need; Radio, Receiver, Battery, and a Charger. Although this system has Return To Home (RTH) included, you will need to add components like a camera and VTX for FPV.
Ardupilot parameter settings can be found here.
Browse the rest of our PNP wings, as well as our AtomRC selection!
Features
EPP molded wing, embedded with carbon fiber tube, durable and light weight.
Carbon fiber tube enhanced elevens, more rigid elevens during high speed fight.
Detachable wing, portable to transport.
Detachable head, two head for choice, use can choose fly with Gopro or without Gopro.
Rubber band and magnet to lock the Gopro, easy to install the Gopro.
V tail design make the wing more stable than normal fly wing.
Pre installed wing and fuselage protector, more durable during landing.
Compatible with GOPRO hero 5-7.
Movable battery slot for better “CG” adjustment.
Pre installed camera cable and antenna for FPV gear.
Air inlet and outlet for FPV gear cooling.
Specifications
Wingspan: 845mm
Motor: AtomRC 2306 1700Kv (included)
ESC: AtomRC BLS 30A 2-4S with 5V/3A BEC (included)
Servo: AtomRC 9g Digital Servo 300mm 2pcs (included)
FC: AtomRC F405 NAVI (included)
GPS: BN220
Prop: 7042-2
Material: EPP
Package Size: 675 x 174 x 285mm
Length: 710mm
Recommendations
Recommend Propeller: 5-7" (Comes with 2 Bi-Blade 7" Props)
Recommend Battery: 4S 1300-2200mah (Not Included)
Recommend Radio: more than 6CH (Not Included)
Includes
1x AtomRC RTH Dolphin V1.1 FPV Fixed Wing - Black/White
1x AtomRC BLS 30A 2-4S with 5V/3A BEC (Installed)
2x AtomRC 9g Digital Servo 300mm (Installed)
1x AtomRC 2306 1700Kv (Installed)
1x AtomRC F405 NAVI (Installed)
1x Sticker Sheet
1x User Manual
1x Carbon Tube
2x 7042 Props
All batteries must be shipped by a ground shipping method.
4S Lithium-Ion battery for the DJI FPV Goggles. Connect the XT60 to a DC power cable and connect the DJI FPV Goggles to the battery.
Check out the rest of our Auline products, DJI FPV System Parts & Accessories, and our whole battery collection!
Features
XT60 Connector
Made specifically to power DJI Goggles
Long lasting
Protective board
Specifications
Capacity: 2600mAh
Voltage: 14.8V
Connector: XT60
C-Rate: 1C
Weight: 202.4g
Includes
1x Au line 14.8V 4S 18650 2600mAh 1C Li-Ion Battery w/ Built-In Protective Board - XT60
Premium performance. That’s been the focus of AxisFlying since we started a year ago. The AF series, and now the BB series. We pushed the envelope of the tried-and-true FPV formula. Now we’ll be doing it again…Introducing AE series, by AxisFlying. Great performance, high quality, and the high standards that we hold all of our products to. The AE series is the perfect compromise of price and performance. Now, we’re fully aware of the stigma surrounding ‘budget’ motors. Can’t compromise on price without compromising on performance, right? Wrong. Our engineers took the same principles we take to all our motor designs, and pulled back as much cost as possible – all while keeping the quality and performance. We truly believe that this is the alternative to the high-end motors… whilst being under $16.
Check out our vast motor selection and all our Axis Flying Products!
Specifications
Input Voltage: 6S
Kv Rating: 1800Kv
Stator Size: 23x6mm
Configuration: 12N14P
Wire: 20#AWG 150mm length
Shaft Diameter: 5mm
Max. Power (60s): 901W
Internal Resistance: 60.7mΩ
Peak Current: 40.6A
Motor Dimensions: ɸ27.9x32.7mm
Weight (Incl. Cable): 31.5g
Mounting Pattern: 16x16mm
Includes
1x Axis Flying AE2306.5 1800Kv Motor
Premium performance. That’s been the focus of AxisFlying since we started a year ago. The AF series, and now the BB series. We pushed the envelope of the tried-and-true FPV formula. Now we’ll be doing it again…Introducing AE series, by AxisFlying. Great performance, high quality, and the high standards that we hold all of our products to. The AE series is the perfect compromise of price and performance. Now, we’re fully aware of the stigma surrounding ‘budget’ motors. Can’t compromise on price without compromising on performance, right? Wrong. Our engineers took the same principles we take to all our motor designs, and pulled back as much cost as possible – all while keeping the quality and performance. We truly believe that this is the alternative to the high-end motors… whilst being under $16.
Check out our vast motor selection and all our Axis Flying Products!
Specifications
Input Voltage: 6S
Kv Rating: 1960Kv
Stator Size: 23x6mm
Configuration: 12N14P
Wire: 20#AWG 150mm length
Shaft Diameter: 5mm
Max. Power (60s): 901W
Internal Resistance: 60.7mΩ
Peak Current: 40.6A
Motor Dimensions: ɸ27.9x32.7mm
Weight (Incl. Cable): 31.5g
Mounting Pattern: 16x16mm
Includes
1x Axis Flying AE2306.5 1800Kv Motor
The lightweight Argus Mini is specially designed for small size FPV drone, reducing the weight of the whole FPV to a greater extent while providing stable and excellent control. This flight controller is small and compact while boasting community favorite MPU6000 gyro for the best performance.
Check out all our 20x20 FCs and all our Axis Flying Products!
Specifications
MCU: STM32F722RET6
FC target: AXIS FLYING F7 PRO
Mounting Holes: 20x20mm M2/M3
FC: Axisflying F7 PRO
Gyro: MPU6000
BEC: 5V 3A
Blackbox: 16MB
Weight: 5g
UART: 1-5
OSD: Supported
Barometer: Supported
Size: 28.5x27x6.2mm
Includes
1x AxisFlying Argus Mini F7 4-6S 20x20 Flight Controller - MPU6000
Blackbird V3 2207 1975Kv Motor is the perfect choice for powerful and efficient racing and freestyling. This motor was developed in collaboration with renowned FPV pilot Damien Gans, better known as "Black Bird". This motor features BST bearing shield tech which protects from dust and water, extending bearing smoothness and life. Get more thrust and say goodbye to crushed bearings. Behind the classy look of the black and gold there is monster power, perfect for your next 6S quad. Get ready to take your experience to the next level.
Check out our vast motor selection and all our Axis Flying Products!
Features
Bearing Shield Technology
An IP53 rating dustproof and waterproof bearing placement design.
BST protects from environmental elements and prolongs the smoothness and lifespan of the bearing. Increased thrust efficiency and say goodbye to crush motor bearings
Specifications
Configuration: 12N14P / N52H arc magnet
Motor stator size: 2207.3
Kv Rating: 1975Kv
Input Voltage: 6S
Motor mounting hole size: 16mmx16mm M3
Motor cables: AWG 20#, 150MM
Motor dimensions (Dia *Len): Φ27.5 x 33.4MM / M5 shaft
Weight: 32.6g
Max.Power: 1070W
Peak Current: 44.7
Internal Resistance: 56m Ω
Includes
1x AxisFlying Blackbird V3 2207 1975Kv Motor
1x Hardware Kit
The Axisflying Kolas 6 is a 6" long-range FPV frame with up to 15 minutes of flight time. Axisflying has adopted an innovative folding design with the Kolas 6, allowing for easier storage and transport! This unique frame kit also includes all 3D printed parts.
Check out all our DJI-compatible frames, electronics, and accessories and all our Axis Flying Products!
Features
XT60 plug on the left side of the frame for flight safety
25MM top to bottom distance for Caddx Vista
Open right side design for quick tuning
20MM/25MM/26.5MM Mounting Holes
Independent receiver compartment
High-strength T700 carbon plate
Foldable drone for easy storage
Ability to carry GoPro Camera
16x16 motor mounting holes
Underslung navigation light
15 Minute flight time
6" Foldable arms
Specifications
Wheelbase: 245mm
Top plate: 2.5mm
Bottom plate: 32.5mm
Arm: 7.0mm
FC mounting holes: 25.5mm x 25.5mm M2 / 20mm x 20mm M3
VTX mounting holes: 25.5mm x 25.5mm / 20mm x 20mm
Motor mounting holes: 16mm x 16mm
Camera installation space: 19-20mm
Suitable propeller size: 6″propeller
Weight: 138g (without TPU)
Includes
4x Axisflying Kolas 6 Foldable 6" Arms
1x Battery Ant-Slip Pad
1x 3D Printed Parts Set
2x Camera Side Plates
1x Hardware Set
1x Main Plate
2x LiPo Strap
1x Top Plate
Take your FPV experience to the next level with the Axisflying Manta 3.6 frame kit. This 3.6" frame offers longer flight times and flies like a 5" drone for an exceptionally durable and fast ride. Enjoy superior speed and control every time you take to the skies.
Axisflying combines CNC aluminum parts with high-quality carbon plates to bring the MANTA series of freestyle frames with a unique and innovative design in the industry.
This frame has a longer body for electronics space and has been specially designed around carrying the DJI O3 Air Unit!
Be sure to check out all our 3.5" frames, and all our Axis Flying Products!
Features
MANTA 3.6 frame is specially designed for 3.6-inch Freestyle and Cinematic, launched in Squashed X.
Squashed X design for a flexible flight experience, props are not visible from the FPV camera, more suitable for freestyle with high maneuverability.
The frame adopts the innovative CNC aluminum structure design with high-strength carbon plates making the overall structure very strong, stable, and safe.
Specifications
Name: Manta 3.6"
Structure: Squashed X
Wheelbase" 162mm
Bottom Plate Thickness: 3mn
Top Plate Thickness: 2mm
Carbon Material: T700
Bottom Plate Distance: 20mm
Arm Thickness: 4mm
Lens Space: 14-20mm
Stack Mounting: 20x20m (m2) & 30.5x30.5mm (M3)
VTX Mounting: 20x20m & 25.5x25.5m (M2)
Prop Size: 3.6 inch Max
Motor Mounting: 12x12mm (M2)
Weight: 108g (TPU inc)
Includes
1x AxisFlying Manta Squashed X 3.5" Micro Freestyle Frame Kit
Speed & Control is what makes up FPV Racing. Since the inception of the new Azure Power 5150, special attention was paid to fluid mechanics.The Azure Powers unmistakably unique shape and curves make for a very powerful combination. Additionally, the stall angle of attack was taken into consideration for the best balance of power throughout the entire RPM range.
Check out all our 5" Props and our Azure Power Products.
Specifications
Length: 5.1"
Pitch: 5"
Blades: 3
Material: Polycarbonate
Includes
4x Azure Power 5150 Tri-Blade 5'' Prop (2CW, 2CCW)
New V2 comes with a tactile power button, 6S support and a cable management kit! The plug and play Digidapter from British Drone Industries is the cleanest way to add analog FPV capabilities to your DJI Goggles. The injection molded face plate keeps your goggles looking sharp, and the included cables mean soldering is purely optional.
Check out all our FPV receiver modules and our DJI compatible gear!
Features
Short delay tactile power button for analog module
Compatible with existing modules: The Digidapter is compatible with existing analog modules. Featuring a standard 9 pin header for use with the TBS Fusion, Foxeer Wildfire, Rapid Fire, True D-X, Eachine Pro58, and more..
Plug & Play No Solder Solution: Installation takes less than a minute, and mounts quickly and easily to the front of your DJI Digital FPV Goggles. Including optional solder points for a cable free solution.
New cable management set included!
Specifications
Maximum Input Voltage: 28 Volts DC
Minimum Input Voltage: 7.4 Volts DC
Nominal Output Voltage: 5 Volts DC
Maximum Module Supply Current: 1 Amp
Rated Continuous Power: 5 Watts
Ports:
5.5mm x 2.1mm DC In 7.4v-26v (2s-6s)
4 pole 3.5mm video/audio out
9 pin RF module receiver header
Cables:
5.5mm x 2.1mm Male to Dual 5.5mm x 2.1mm Female DC Jack Splitter
4 Pole Gold Plated 3.5mm Male to 3.5mm Male Video Cable
Material/Color: Matte Black, Injection Molded, Acrylonitrile Butadiene Styrene
Dimensions: 158x74x40mm (6.25x3x1.6 inches)
Weight: 34g
Includes
1x Digidapter V2 faceplate
1x Analog video cable
1x Analog video/audio splitter for audio out
1x Dual DC/DC male to single DC female split cable
1x Allen key
2x 12mm cap head bolts
1x Cable strain relief clip
2x Cable clips
The BDI Luxe Goggle Bag is designed specifically to hold your DJI FPV goggles without removing the BDI analog adapter! This bag also features an ultra soft 15mm synthetic fur interior and rugged nylon exterior to give your FPV goggles the ultimate protection. The robust weatherproof zip pocket provides a safe place for all of your cables and accessories along with spacious storage for multiple battery packs. A generous interior enables storage of a fully loaded set of FPV goggles complete with antenna, with a dual pull cord opening you can be packed and ready to go in moments.
Make sure to check out our other DJI compatible accessories and all of our BDI products!
Specifications
Dimensions: 280x230mm
Includes
1x BDI Luxe Goggle Bag for DJI FPV Goggles
2x Microfiber Cloths
Premium FPV Goggle Protection, BDI Luxe Bag Mini features an ultra-soft 15mm synthetic fur interior and rugged nylon exterior to give your FPV goggles the ultimate protection.A generous interior is sized to fit the latest generation of digital goggles and accessories including;DJI Goggles 2DJI ControllerWalksnail/Caddx Avatar GogglesTBS Tango 2 ControllerThe robust weatherproof zip pocket provides a safe place for all of your cables and accessories along with spacious storage for multiple battery packs.With a dual pull cord opening, you can be packed and ready to go in moments.
Make sure to check out our other DJI compatible accessories and all of our BDI products!
Includes
1x BDI Luxe MINI Goggle Bag for DJI Goggles 2
Newly developed, BeastHobby VR100 goggles, greatly heightening the FPV flying experience.
Check out the rest of our BeastHobby products and selection of FPV Goggles and Accessories!
Features
New Refraction light path design;
Object distance adjustable, could match Myopia degree（0°-700°）；
Low power consumption, working current 350mA；
super sensitive 5.8GHz receiver module, strong anti-interference, more stablesignal；
40 CH modules, channels Auto-Searching；
3.0 inch 480*320 Screen resolution Highlight IPS screen；
Built in 3.7V/1200mAh Lithium battery；
TYPE-C charging output；
Real-time video return, no time delay；
Support Chinese / English menu；
Support External video signal input；
Support Av signal video output, could connect with the external DVR for recording
Specifications
Item VR100
Name 5.8G FPV Goggle
Display Screen: 3.0 inch IPS Highlight screen
Screen resolution: 480*320
Ratio: 16:9
View Angle: 360-degree viewing angle
Backlight brightness: 500cd/m²
video delay Less than 10 milliseconds
Interface definition antenna SMA male to RP-SMA female
charging TYRE-C port charge battery
headphone 3.5mm AV port available for video input and output
Language Chinese and English
Power Supply Power adapter: suggest use DC5V/1 or DC/5V2A interface
Capacity: Built in 3.7V/8\1200mAh lithium polymer battery
Working power:
Wireless Frequency Table (MHz) CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 Band A 5865 5845 5825 5805 5785 5765 5745 5725 Band B 5733 5752 5771 5790 5809 5828 5847 5866 Band E 5705 5685 5665 5645 5885 5905 5925 5945 Band F 5740 5760 5780 5800 5820 5840 5860 5880 Band R 5658 5695 5732 5769 5806 5843 5880 5917
Appearance Dimension: 107mm * 150mm * 75mm
Weight: 300g without antenna
Includes
1x BeastHobby VR100 5.8GHz FPV Goggles
Lens Cleaning Cloth
USB Charging Cable
Antennas
AV data cable
Goggle packing bag
Carry Case
Lightweight 65mm whoop drones are becoming popular among racing enthusiasts. Experience powerful performance with the BetaFPV 0702 30000Kv Dual Ball Bearing Micro Motor 4 Pack. These motors boast dual ball bearings and strong reliability and efficiency to empower your flight.
Take a look at all of our micro motor selections and our BetaFPV products!
Features
These motors are customization designs for the ultra-lightweight 65mm racing drone, featuring unparalleled performance in extreme racing flight.
The 0702 motor boasts double ball bearings
For those seeking even higher speeds, the 30000Kv option provides more punch on the throttle. These motors are ideal for indoor FPV racing and enable aggressive flying.
Paired with The PEEK screws, only weighing 0.10 grams/12pcs, it can save up to 0.46 grams for a build. With more heat resistance, anti-friction, anti-shock, and anti-fatigue properties, the PEEK screws are both reliable and durable.
Plug-and-play motors
Specifications
Bearing Dual Ball Bearings
KV: 30000
Weight: 1.52g±0.03g
Weight Without Connector: 1.45g
Color: Black/Red
Shaft Diameter: 1mm
Shaft Length: 4.2mm
Hole Distance: 6.6mm
Motor Mount Holes: M1.4
Input Voltage: 1S
Cables 35mm including connector, 30AWG cables
Dimensions: 12.75xφ9mm
Motor Bolt Pattern: 6.6mm Tri-Mount
Includes
1x BetaFPV 0702 30000Kv Dual Ball Bearing Micro Motor 4 Pack
15x M1.4x3 PEEK screws
12x M1.4x3 metal screws
Lightweight 65mm whoop drones are becoming popular among racing enthusiasts. Experience powerful performance with the BetaFPV 0702SE 25000Kv Brass Bushings Micro Motor 4 Pack. Enjoy a higher level of performance with this reliable 4-pack.
Take a look at all of our Micro Motor selections and our BetaFPV products!
Features
These motors are customization designs for the ultra-lightweight 65mm racing drone, featuring unparalleled performance in extreme racing flight.
Paired with The PEEK screws only weighing 0.10 grams/12pcs, it can save up to 0.46 grams for a build. With more heat resistance, anti-friction, anti-shock, and anti-fatigue properties, the PEEK screws are both reliable and durable.
The truth is that for all speeds of 0702 motors, there is a 603 or 802 size motor that can achieve the same thrust with greater efficiency, the 0702 is favored by active FPV pilots for its ability to reduce weight away from the aircraft's center of gravity. The brass-bushed 0702SE motor is a reliable and cost-effective choice for these pilots.
Plug-and-play motors
Specifications
Bearing Brass Bushings
KV: 25000
Weight: 1.42g±0.03g
Weight Without Connector: 1.35g
Color: Ice Blue/Black
Shaft Diameter: 1mm
Shaft Length: 4.2mm
Hole Distance: 6.6mm
Motor Mount Holes: M1.4
Input Voltage: 1S
Cables 35mm including connector, 30AWG cables
Dimensions: 12.75xφ9mm
Includes
1x BetaFPV 0702SE 0702 25000Kv Brass Bushings Micro Motor 4 Pack
15x M1.4x3 PEEK screws
12x M1.4x3 metal screws
Classic 1102 stator size, matched with an impressive 22000Kv, gets you amazing whoop motors that will take you from regular flying to absolute ripping. Choose between a black base with red accents or a silver base with blue accents. We also carry the classic 1102 18,000Kv version as well!
These motors come with motor plugs attached.
Take a look at all of our micro motor selections and our BetaFPV products!
Features
Adopts the technology of ball bearing, which effectively reduces the friction between the bearing surfaces, increases the duration of the motor, and improves its efficiency.
Lead wire is soldered to the PCB, which allows you to repair it more easily once disconnected.
With exquisite workmanship, provides the most incredible power and thrust in the lightest weight of 2.79g; sturdy structure, and high-quality materials make it performs like a beast.
Possesses dynamic balance and crush-resistant damping bearing, which can eliminate vibration effectively.
The 22000KV version can provide more thrust for aggressive indoor FPV racing.
Specification
Height: 13.6mm (2022 version)
Weight: 2.79g/pc
Shaft Diameter: 1.5mm
Shaft Length: 5mm
Motor Mount Holes: 3-M1.4-φ6.6
KV (rpm/V): 22000KV
Input Voltage: 1S Lipo
Plug and cables: Micro JST-1.25 3-pin connector with 28AWG cables
Includes
1x BetaFPV 2022 Series 1102 22000Kv Micro/Whoop Motor 4 Pack - Choose Your Color
C02 Micro Camera is the lightweight camera customized for those weight sensitive micro whoop drones, like Meteor65, Beta65S, Beta85 pro2, HX100SE. Adapted a 1/4'' CMOS sensor, 2.1mm lens for 1200TVL resolution and excellent latency while minimizing the weight to 1.4g. C02 camera features a JST-0.8 connector, special design in plug-and-play, makes it easy to install without soldering.
This micro camera comes with a micro canopy to protect your camera from a harsh crash!
Be sure to check out all our Micro FPV cameras and our entire BetaFPV selection!
Features
1200TVL High Definition Natural Image
Low Latency
Good Low Light Performance
Plug-N-Play Connector
Wide Input Voltage Range
Specifications
Sensor Type: 1/4" CMOS Sensor
TV System: NTSC
Resolution: 1200TVL
Screen Format: 4:3
Lens : 2.1mm(M7) FOV 160°
Video Out: CVBS
Electronic Shutter Speed: Auto
Min. Illimination: 0.01Lux@1.2F
S/N Ratio: >50db
D-WDR : Auto
Day/Night: Color
Power Requirement: DC 3V~5.5V
Dimension: 13x11mm
Weight: 1.4g
Includes
1x BetaFPV Beta C02 Micro Camera
1x Injection Molded Canopy
4x M1.4x5 Screws
All batteries must be shipped by a ground shipping method.
Cetus X Brushless Quadcopter is a 2S power whoop drone and a primary choice for beginners who want to get advanced flight skills. It features a stronger propulsion system for a speedier and more violent flight, which is capable of performing diverse freestyle tricks. Equipped with M04 400mW VTX and C04 FPV camera that is optimized for longer radio and video transmission. Meanwhile, it supports the Betaflight configurator which is a popular application to configure RC aircraft.
Check out our other RTF combos, all our pre-built quads and our BetaFPV selection!
Features
An excellent preference for beginners to get advanced level. Cetus X brushless Quadcopter is proud of its lightning speed with rapid startup due to its stronger propulsion system.
Build-in ExpressLRS 2.4G receiver that is the most popular radio link, low latency, and far controlling range are possible. Pilots can not only enjoy the flight indoors but also explore the scenery outdoor.
Featuring M04 400mW VTX, C04 FPV camera (based on Caddx Nano Ant Camera or Runcam Nano 4), and 2xBT2.0 450mAh 1S 30C battery for longer radio and video transmission and flight endurance, Cetus X brushless quadcopter allows beginners to gain more achievements in FPV flight.
Classical white design inherited from Cetus Series and made of PA12 material, Cetus X frame has an excellent impact resistance in drop & impact. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots.
Specifications
Item: Cetus X Brushless Quadcopter
Weight: 55g
Wheelbase: 95mm
FC: F4 1S 12A FC V2.2 (ELRS 2.4G)
Motors: 1103 11000KV Motor
Props: Gemfan 2020 4-Blades Props
Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4)
Camera Adjustable Angle: 0°-40°
Receiver Protocol: ELRS 2.4G
VTX: M04 25-400mW VTX
Battery: 2*BT2.0 450mAh 1S 30C Battery
Flight time: 5 mins
Downloads
FC Firmware and ESC download
Includes
1 x Cetus X Brushless Quadcopter
1 x BT2.0 Battery Charger and Voltage Tester
2 x BT2.0 450mAh 1S 30C Battery
1 x Phillips Screwdriver
1 x Prop Removal Tool
1 x Type-C Adapter
4 x Gemfan 2020 4-Blades Props
Check out the C03 FPV Micro Camera, specially designed for indoor micro FPV quadcopters, this micro camera has 1200TVL resolution and 1/3" CMOS sensor getting you a high-quality and clear image. Expect a solder-free, and very convenient installation with this JST-0.8 plug-and-play design, suitable for Meteror series drones. With a Global WDR camera, 4:3 aspect ratio, getting you a clear dynamic picture even in low light conditions. Expect to 2.1mm lens, FOV 160° for beyond the wide angle for recording a more wide and eye-pleasing flight!
Be sure to check out all our Micro FPV cameras and our entire BetaFPV selection!
Features
Included Micro Canopy
1200TVL High Definition Natural Image
Low Latency
Good Low Light Performance
Plug-N-Play Connector
Wide Input Voltage Range
Specifications
Sensor Type: CMOS 1/3"
TV System: NTSC
Resolution: 1200TVL
Screen Format: 4:3
Lens : 2.1mm(M7) FOV 160°
Video Out: CVBS
Electronic Shutter Speed: Auto
Min. Illumination: 0.01Lux@1.2F
S/N Ratio: >50db
D-WDR : Auto
Day/Night: Color
Power Requirement: DC 3V~5.5V
Dimension: 11x14.1x13.5mm
Weight: 1.45g
Includes
1x BetaFPV Beta C03 Micro Camera
1x BetaFPV Micro Canopy w 20°/30° Camera Mounts
4x M1.4x5 Screws
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
Check out all our receivers, and our entire BetaFPV selection!
Specifications
Input voltage: 5V
Telemetry power: 20dbm (100mW, 2.4G Version)
Frequency bands (Nano receiver 2.4G version): 2.4GHz ISM
Frequency bands (Nano receiver 915MHz/868MHz version): 915MHz FCC/868MHz EU
Antenna Connector: IPEX MHF (IPEX 1 / U.FL)
Size: 12x19mm
Weight: 0.7g (receiver only)
Note: The firmware version of the Nano receiver and module manufactured by our company is ELRS 1.0.0-RC5 (the fifth test version before release);ELRS Innovative team has officially released version 1.0.0. Based on the version, we have some updates:
2.4G Nano TX Module supports 500Hz refresh rate；
Short press the button on the Nano module 3 times to get into the binding status.
We suggest our customers upgrade their modules and receivers' ELRS version to 1.0.0. Significantly, the module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully.
Includes
1x Beta FPV ELRS Nano 2.4GHz Receiver
1x BetaFPV T Antenna
2x Spare Shrink Tube
4x 30awg Silicon Connection Wires (1 black, 1 red, 1 white, 1 yellow)
1x Pin Header 1x4
BETAFPV Nano receiver is based on the ExpressLRS project, an open-source RC link for RC applications. ExpressLRS aims to achieve the best possible link performance in both speeds, latency, and range. This makes ExpressLRS one of the fastest RC links available while still offering long-range performance.
Check out all our receivers, and our entire BetaFPV selection!
Specifications
Input voltage: 5V
Frequency bands: 915MHz FCC/868MHz EU
Antenna Connector: IPEX MHF (IPEX 1 / U.FL)
Size: 12x19mm
Weight: 0.7g (receiver only)
Note: The firmware version of the Nano receiver and module manufactured by our company is ELRS 1.0.0-RC5 (the fifth test version before release);ELRS Innovative team has officially released version 1.0.0. Based on the version, we have some updates:
2.4G Nano TX Module supports 500Hz refresh rate；
Short press the button on the Nano module 3 times to get into the binding status.
We suggest our customers upgrade their modules and receivers' ELRS version to 1.0.0. Significantly, the module and receiver have to be in the same ELRS version, otherwise, the frequency cannot match successfully.
Includes
1x Beta FPV ELRS Nano 915MHz Receiver
1x BetaFPV T Antenna
2x Spare Shrink Tube
4x 30awg Silicon Connection Wires (1 black, 1 red, 1 white, 1 yellow)
1x Pin Header 1x4
This ELRS Recovery Dongle is an FTDI USB to TTL module based on the CP2102 bridge controller, which is applied to the firmware upgrade for the ESP32&ESP8XX chip. The ExpressLRS Recovery Dongle is compatible with many ELRS receivers in the market and FPV goggles backpack. It will be a good choice to unbrick the ELRS receiver when failed in updating or flashing firmware by UART.
Check out our Express LRS collection and all our BetaFPV products!
Features
Unbrick and recover an ELRS receiver when having a failed update such as missing bootloader
Solder Free! This dongle features spring probe pins for more convenient use
Comes inside of a plastic case that is more durable and portable compared with the naked board version on the market.
USB to Serial chip (CP2102) supports XP, win7 / win8 32bits, 64bits, win10 / 11 32bits, 64bits, Linux, MAC
Specifications
Operating Voltage: 5V
Logic Voltage: 5V
3.3V Power Supply Output Current: 400mA
Pins Output Method: 2x4P-2.54mm pin header
Serial Baud Rate: Up to 921600bps.
USB Connector: USB-C
Includes
1x ExpressLRS Recovery Dongle
1x 4 Pin Cable
1x Probe Converter Board
F722 2-6S AIO 35A FC is a very reliable FC that is made to meet your advanced FPV needs. Comes with an F722 chip and a BLHeli_32 ESC, this board provides a better performance capability and higher calculation speed, which brings pilots a more stable and smoother flight. What's more, F722 AIO FC has specially added a 6-pin connector for DJI Digital VTX, just plug & play, less solder work needed, super easy to install. It can handle 35A continuous current (40A burst), supports the 2-6S lipo battery.
Check out all our whoop flight controllers, and all our BetaFPV gear!
A very in-depth video on the BetaFPV F722 V2 2-6S AIO Whoop/Toothpick Flight Controller.
Features
Built-in STM32F722RET6 CPU, F722 FC is more powerful than F4. It features a fast processing speed and stable performance, providing reliable and smooth flight for 4"-5" drones.
F722 AIO 35A FC has specially added a 6-pin connector for HD Digital VTX, just plug & play, less solder work needed, perfect for the pilots who enjoy the HD Digital VTX system.
6 full UARTs are available on this board. With plenty of UARTS, Pilots could have more options for external parts like VTX, GPS, Receiver, and other components.
It can handle 35A continuous current (40A burst), supports the 2-6S lipo battery, and gives the drone a more robust flight performance.
With the 6S battery and this F722 35A AIO FC, the drone will break through the limit of the power of the toothpick drone, exploring more possibilities in 4-5'' drones.
The new BLHeli_32 ESC version is built-in a 16MB flash memory chip dedicated to Blackbox logging, which is an extremely powerful tool for tuning and troubleshooting an FPV drone. It has a faster processing speed and up to 128k PWM frequency, providing a more stable and smoother flight for pilots.
V2 with BLHeli_32 ESC
V1 with BLHeli_S ESC
PWM Frequency
24k-128k
24k-96k
ESC Firmware
BLHeli_32.9, 32-bit
BLUEJAY V0.16, 8-bit
Blackbox
16MB
Not included
Weight
9.00g
7.06g
Board Thickness
1.6mm
1.4mm
BLHeli_32 ESC Firmware
The F722 35A AIO FC has two boards with different ESC versions for choice. The V2 board uses AT32F421G8U7 MCU, a 32-bit ESC chip, with BLHeli_32 ESC firmware. This firmware supports up to 128k PWM frequency, featuring faster processing speed and unlocking more functions for the flight.
BLHeli_32 ESC
BLHeli_S ESC
MCU
AT32F421G8U7
EFM8BB21F16G-C
Firmware Version
BLHeli_32.9, 32-bit
BLUEJAY V0.16, 8-bit
PWM Frequency
24k-128k
24k-96k
Bidirectional DSHOT
Support
Support
Signal Support
PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Know More About ICM42688 Gyro
The F722 FC ICM42688 version has the same solder pad and layout as BMI270 except for the gyro chip. Besides, you can also find the difference in Betaflight settings.
The ICM42688 gyro supports 8.00 kHz gyro update frequency compared with the BMI270 gyro which supports 3.20 kHz. When using a 6S battery, the ICM42688 gyro has a good performance.
The degree between ICM42688 and BMI270 gyro is different. When configuring F722 FC ICM42688 version, the gyro degree should be set to CW270°.
Diagram for F722 35A AIO FC
The below picture is the top front of the F722 35A AIO Brushless FC. (Both V1 and V2 boards have the same solder pad and connector ports.)
The below picture is the bottom front of the F722 35A AIO Brushless FC. (Both V1 and V2 boards have the same solder pad and connector ports.)
There are 2 LEDs on the bottom of the board to indicate the status, including the FC LED (Blue) and FC Power LED (Red). The LED status for V1 and V2 boards are the same.
LED
Status
Description
FC LED (Blue)
Solid
Armed
FC LED (Blue)
Extinguished
Disarmed
Power LED (Red)
Solid
Power on
How to Connect the External RX&VTX
To connect the external RX&VTX, please refer to the below diagram. F722 35A AIO V1 and V2 boards have the same soldering pad and connecting ports.
Specifications
Flight Controller
Item: F722 35A AIO Brushless Flight Controller
Weight: 9.00g (BLHeli_32)
CPU: STM32F722RET6
Six-Axis: ICM42688
Mounting hole size: 26mmx26mm
Firmware version: betaflight_4.3.0_STM32F7X2
OSD: Built-in BetaFlight OSD (OSD chip: AT7456E)
Support programmable LED like WS2812 etc
Built-in current sensor
Blackbox: 16MB (V2 with BLHeli_32 ESC included)
ESC
Signal support: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
Receiver: Support Frsky XM/XM+ Receiver/ Futaba Receiver/Flysky Receiver/DSMX Receiver/TBS Crossfire Receiver (requires external connection)
Input voltage: 2S-6S Lipo
Continuous current: 35A
Peak current: 40A
ESC firmware: BETAFPV_35A_V2_BLHeli_32_Multi_32_9 (BLHeli_32)
Indicators: Power indicator (Red) / FC indicator (Blue)
Capacitance: CS|5*10*13mm|470μF|35V
Connector: 80mm 14AWG silicone cable with XT60
Recommended motors: 14XX series, 15XX series, 16XX series, 18XX series, 20XX series
Includes
1x BetaFPV F722 V2 2-6S AIO Whoop/Toothpick Flight Controller (w/ 35A 32Bit 4in1 ESC) - ICM42688
Spare replacement props for the BetaFPV HX115 and HX115 HD.
Check out the rest of our HX115 parts & accessories and our BetaFPV selection!
Specifications
Material: Poly Carbonates
Length: 3 inches, about 76.2mm
Color: Randomly 4 colors, Black, Blue, Transparent Red, Transparent Purple, Transparent Green
Mounting hole: 1.5mm
Weight: 1.5g(1 pcs), 6g (4 pcs)
More Power, Control, and Speed for 2-3 inch sized FPV Micro Racing Drones
Includes
4x BetaFPV HQ 3030 Tri-Blade 3" Prop 4 Pack
1x Mounting Screw Set
All products with batteries must be shipped by a ground shipping method.
The Beta FPV LiteRadio 3 Radio Transmitter is the newest remote control in the LiteRadio series. This transmitter features an ergonomically designed handle and has superb performance in its working time and newly updated gimbals. Besides, this version supports BETAFPV Configurator which is a utility designed to simply update, configure, and tune the radio controller.
Check out our RC Transmitters and all our BetaFPV products!
Features
8 channels in total
USB Joystick support for most practice simulators
Nano module bay for external TX module
Newly designed joystick gimbal for longer usage life
Support BETAFPV Configurator for updating, configuring, and tuning
Built-in 2000mAh battery and USB charge supported
Specifications
Frequency Range: 2.4GHz
Channels: 8
Support Protocol: Futaba S-FHSS/Frsky FCC D16/Frsky LBT D16/Frsky D8 or ExpressLRS 2.4G
Power: ELRS version 25mW/50mW/100mW, Frsky version 100mW
Support USB Charging / Firmware Update: Yes
LED Light: Green-Power On / Red-Warning if the voltage is lower than 3.5V / Blue-Normal
Battery: 1S 2000mAh
Charging Connector: USB 3.0 Type-C
Includes
1x BetaFPV Lite Radio 3 2.4GHz RC Transmitter
All products with batteries must be shipped by a ground shipping method.
After the latest round of beta testing, the LiteRadio 2 SE is back to the market with huge improvements. This pint size FRSKY radio is powered by OpenTX firmware and can toggle between FRSKY D16 and D8 protocols. Real gimbals provide the tactile feedback of a pricier radio and USB connectivity can be used to play FPV simulators on a computer. The LiteRadio 2 SE is a great option for anyone looking for a lower cost radio with some great features.
Some new improvements include...
Built-in 1000 mAh 1S battery, LiteRadio 2 SE increases the endurance to 8 hours.
Updates with BETAFPV self-developed LiteRadio System. Pilots can directly operate the Joystick Calibration and Upgrade Firmware on the radio transmitter.
Supports Frsky D8, Frsky D16 FCC and Frsky D16 LBT mode via the radio transmitter.
Comes with 100mW transmitting power, LiteRadio 2 SE brings a wider operating range.
Check out our RC Transmitters, our FrSky Products, and all our BetaFPV products!
This radio does not support newer FrSky receiver firmware.
Features
LiteRadio 2 SE upgrades with BETAFPV self-developed Customized LiteRadio System. Pilots can directly operate the Joystick Calibration and Firmware Update on the radio transmitter, which is more convenient for the beginner racer to operate.
Equipped with a built-in 1000 mAh 1S battery, LiteRadio 2 SE can use up to 8 hours, bringing an excellent endurance performance.
Comes with a built-in charging module, LiteRadio 2 SE can support USB charging which is more convenient to use. Meanwhile, it designs a Low-Power warning to indicate a low battery. While it needs to be re-charged, the blue light will flash slowly.
Compared with the LiteRadio 2, LiteRadio 2 SE has a larger transmitting power which can reach 100mW, bringing a wider operating range.
Adopted the rubber coat, LiteRadio 2 SE is ergonomic and has the shape of a gaming controller. It's comfortable to hold, and the anti-slip texture on the handles allows for a solid grip.
This radio transmitter acts as a USB Joystick when connected to a personal computer. So you could use it to play FPV simulators like EREADRONE.
Specifications
Frequency Range: 2.4GHz (2403MHz-2447MHz)
2.4G System: NRF24L01 or CC2500
Channel: 8
Support Protocol: Bayang / Futaba S-FHSS / Frsky D16 FCC/ Frsky D16 LBT/ Frsky D8
Power: ≤100mw
Adapted Drone Type: Multirotor
Support USB Charging / Firmware Update
Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration
LED Light: Green-Power On / Red-Warning / Blue-Normal
Battery: Built-in 1000mAh 1S Battery
Charging Connector: Type-C
Includes
1x BetaFPV LiteRadio 2 SE RC Transmitter 2.4GHz - FRSKY D8/D16
Beta FPV LiteRadio transmitter neck strap adopts comfortable soft nylon or polyester material. The buckle is made of high-quality metal, durable, and handy detachable. Besides, the strap is adjustable, which will match you perfectly. This neck strap not only can be used for LiteRadio 3 but also other transmitters with the hook.
Check out the rest of our transmitters, parts & accessories, and our BetaFPV selection!
Features
Made of high-quality nylon or polyester material. It is comfortable and soft.
The buckle is made of high-quality metal, durable, and handy detachable.
With adjustable function, this strap will fit you perfectly.
Two colors for the options. The white color is designed with BETAFPV/ELRS printing, and the black strap is reflective.
This neck strap not only can be used for LiteRadio 3 Transmitter but also other transmitters with the hook.
Includes
BetaFPV LiteRadio Transmitter Strap
Both the full adapter and PCBA only are Beta FPV's most recently updated versions.
With the use of micro to nano module adapter, a nano tx module can work on transmitters with JR module bay (aka Micro module port) easily!
The Micro to Nano Module Adapter (PCBA) is available for those who can print the case for themselves. You can download the adapter case STL file on Beta FPV's technical support page.
This adapter is a perfect match for the BetaFPV Nano ELRS module in either 900MHz or 2.4GHz!
Check out our RC Transmitters and all our BetaFPV products!
Specifications
Input: JR module bay (Micro module bay)
Output: Nano module bay (Lite module bay)
Supported Radio Transmitters: Frsky X9D/X9D Plus/X12S/X10/X10S/X7/X7S,
Flysky TH9X, Turnigy 9XR/9XR PRO, FUTABA 16IZ, Jumper T16/T18/T18 Pro,
Radiomaster TX16S/TX18S, TBS Mambo
Supported TX Modules: BETAFPV Nano TX Module, TBS Crossfire Nano TX、Frsky XJT Lite/R9M Lite/R9M Lite Pro.
Dimensions: 65x48x28mm
Weight: 24.8g
Includes
1x Micro-Nano Module Adapter or PCBA
1x Converter cable
This micro canopy is specially designed for Walksnail Avatar Nano camera, Runcam Nano Lite Camera, or most 14mm nano cameras, supporting an adjustable camera lens of 0-45°. It features high compatibility for both HD Digital VTX and Analog VTX like M03 Analog VTX.
Features
The canopy is designed with camera mounting holes for an adjustable camera lens of 0-45°. It is suitable for Walksnail Avatar Nano camera, Runcam Nano Lite Camera, or most 14mm nano cameras.
Lightweight and two colors for options (Black/Blue). Using it with Meteor Series colorful frame will be more attractive. Recommend frames for Meteor65 Pro, Meteor75, and Meteor85
Adopt with injection molding technique, this canopy is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone.
Unique design with three decorative parts like a knight, the drone flies in the air like a scientific spaceship cruising, making it very cool and special. Also, the decorative parts are detachable for better heat dissipation.
Mounting Diagram
The picture below is the diagram for this canopy. This canopy is applied to 1S Walksnail Avatar Mini HD VTX, HDZero Whoop Lite Bundle, M03 Analog VTX, or most 14mm nano cameras. Other brands' VTXs with similar sizes are available to be mounted on this canopy.
Specification
Item: Micro Canopy for HD Camera
Material: PP
Tilt: 0-45°
Weight: 2.50g (without decorations), 3.28g (with decorations)
Color: Black/Blue
Adapted VTX: 1S Walksnail Avatar Mini HD VTX, HDZero Whoop Lite Bundle, M03 25-350mW 5.8G VTX
Adapted FPV Camera: Walksnail Avatar Nano Camera, Runcam Nano Lite Camera, or most 14mm nano cameras
Adapted Frame: Meteor65 Pro/Meteor75/Meteor85
Includes
1x Micro Canopy for HD Camera (Black/Blue)
3x Decorative Parts
3x M1.4x3 Screws
8x M1.4x5 Screws
3x M2x4 Screws
Note: The decorative parts for both Micro Canopy for HD Camera and Canopy for Micro Camera 2022 are unavailable in common use even though they have a similar appearance.
The Pavo25 frame in a multitude of colors to transform your Pavo25 to be your own!!
Check out all of our frames, and the rest of our BetaFPV gear!
Features
With the insert copper nut design on the main screw holes, only 6 screws are enough to assemble the whoop duct and drone, which is convenient to build. The Pavo25 frame sports a reasonable structure assembly design that is optimized to decrease complex components, making the build easy.
Made of high-quality PA12 material and 2.5mm carbon fiber. With a strong and durable frame kit, the Pavo25 frame optimizes the vibration damping structure for the camera mount, allowing pilots to get an excellent experience.
An innovative pusher frame with a duct design. It generates more lift for the whole quadcopter, improving the ability of endurance and propulsion.
Equipped with a CNC Vista Adapter. It effectively provides the Caddx Vista HD Digital VTX with a good cool down by increasing the heat dissipation area, reducing the influence of heat on VTX.
Specifications
tem: Pavo25 Frame Kit
Wheelbase: 108mm
Color: Black/Transparent Grey/Yellow/Blue/Purple
Material: PA12
Frame Color: Black, grey, yellow, blue, purple
Weight:31.5g (without carbon fiber)
Body Size: 153.2x153.7mm (without EVA adhesive foam)
Top plate thickness: 2.5mm
Propeller size: 2.5-inch
FC pattern: 25.5x25.5mm
FPV cam spacing:14mm
Includes
1x BetaFPV Pavo25 2.5" Cinewhoop Frame Without Carbon
All batteries must be shipped by a ground shipping method.
Brush up on your FPV skills with the BetaFPV RTF Cetus FPV Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case. You have everything needed to get into FPV, including the LiteRadio 2 SE Transmitter, VR02 FPV Goggles, and the Cetus Whoop.
Easy to carry on and ready to fly. What are you waiting for?
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:
BetaFPV 1S 300mAh - BT2.0
Check out our other RTF combos, all our pre-built quads and our BetaFPV selection!
Features
3 Flight modes
Altitude hold and emergency landing functions
Storage case
FrSky D8 protocol drone and radio
Brushed drone, easy to fly
Specifications
Positioning system: Optical flow / Barometer / Laser
Height Positioning: Laser / Barometer
Angle Locating: Optical flow ( effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
Flight controller: Lite 1S Pro brushed FC
VTX: 25mW
Camera tilt degree: 25°
Camera: C01 FPV Micro Camera
Transmitter: Literadio2 SE Transmitter
TX mode: Mode 2 (Left stick throttle)
Goggles: VR02 Goggles
Motor: 716-19000KV Brushed motor
Propeller: 31mm 4-blade 0.8mm shaft hole
Takeoff weight: 35g(with battery)
Power system: 1S
Battery: BT2.0 300mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (Clear line of site)
Includes
1x Cetus Brushed Quadcopter
1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1x VR02 FPV Goggles
2x BT2.0 300mAh 1S Lipo Battery
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C Adapter
1x Prop Removal Tool
4x 31mm 4-Blade Props
1x Portable Storage Bag
User Manual
All batteries must be shipped by a ground shipping method.
The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles. It's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor.
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:
BetaFPV 1S 450mAh - BT2.0
Check out our other RTF combos, all our pre-built quads and our BetaFPV selection!
Features
The auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV.
Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train.
With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight.
Made of PA12 material, the frame has an excellent impact resistance in drop & impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors.
All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry.
Specifications
BetaFPV LiteRadio 2
Frequency Range: 2.4GHz (2403MHz-2447MHz)
2.4G System: NRF24L01 or CC2500
Channel: 8
Support Protocol: Bayang / Futaba S-FHSS / Frsky D16 FCC/ Frsky D16 LBT/ Frsky D8
Power: ≤100mw
Adapted Drone Type: Multirotor
Support USB Charging / Firmware Update
Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration
LED Light: Green-Power On / Red-Warning / Blue-Normal
Battery: Built-in 1000mAh 1S Battery
Charging Connector: Type-C
BetaFPV VR02 Goggles
Screen Size: 4.3"
Screen Resolution: 800x480p
Screen Brightness: 300cd/m2
Field of View: 55°
Charging Port: USB-C
Input Voltage: 3.7V 500mA
Internal Battery: 3.7V 2000mAH
Dimensions: 143x126x86.3mm
Weight: 300g
BetaFPV RTF Cetus Pro
Positioning system: Optical flow / Barometer / Laser
Height Positioning: Laser / Barometer
Angle Locating: Optical flow ( effective height 0.3-3m)
Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment)
Receiver protocol: Frsky D8
VTX: 25mW
Camera tilt degree: 25°
Camera: C02 FPV Micro Camera
Propeller: 40mm 3-blade 1.5mm shaft hole
Power system: 1S
Battery: BT2.0 450mah 1S Battery (external)
Flight time: 4-5min
Flight distance: 80m (Clear line of site)
Includes
1x Cetus Pro Brushless Quadcopter
1 LiteRadio2 SE Transmitter (Frsky D8 Protocol)
1x VR02 FPV Goggles
2x BT2.0 450mAh 1S Lipo Battery
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C Adapter
1x Prop Removal Tool
1x Portable Storage Bag
All batteries must be shipped by a ground shipping method.
Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level of flying FPV.
Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad:
BetaFPV 1S 300mAh - BT2.0
Check out our other RTF combos, all our pre-built quads, and our BetaFPV selection!
Features
Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level.
Two FC versions are offered for pilots. With the support of the Betaflight configurator, beginners can learn quadcopter configuration through the Betaflight FC version. For pilots who prefer the classical Cetus, the Cetus FC version with an altitude hold function is also coming soon.
Classical white design inherited from Cetus Series and made of PA12 material, the Cetus X frame has an excellent impact resistance in drop & impact and reduces the risk of damage, giving you more peace of mind.
The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots.
LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market.
The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment.
Powerful Propulsion System
Equipped with 1103 11000KV Brushless Motors and Gemfan 2020 4-blade props, the Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. The whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience.
Recording Every Flight Moment
Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience.
Improved Video Transmission
Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-450mW VTX features a lightweight and adjustable output power for long-distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, the C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with the C02 FPV camera.
LiteRadio 3 Radio Transmitter
This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you.
FPV Simulator Supported
First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here.
Various Modes, Accessible to All
Cetus X supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one.
BETAFPV Cetus Series
The BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus Series always satisfies customers' needs no matter new beginners or seasoned pilots.
Specification
Item: Cetus X FPV Kit
Weight: 55g
Wheelbase: 95mm
FC: F4 1S 12A FC
Motors: 1103 11000KV Motor
Props: Gemfan 2020 4-Blades Props
Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4)
Camera Adjustable Angle: 0°-40°
Receiver Protocol: ELRS 2.4G (Betaflight)/Frsky D8 (Cetus)
VTX: M04 25-400mW VTX
Quadcopter: Cetus X Brushless Quadcopter
Transmitter: LiteRadio 3 Radio Transmitter
Goggles: VR03 FPV Goggles
Battery: 2x BT2.0 450mAh 1S 30C Battery
Flight time: 5 mins
Includes
1x Cetus X Brushless Quadcopter (Betaflight Firmware, ELRS 2.4G Receiver)
1x LiteRadio 3 Transmitter (ELRS 2.4G)
1x BETAFPV VR03 FPV Goggles
4x BT2.0 450 mAh 1S Lipo Battery
1x BT2.0 Battery Charger and Voltage Tester
1x USB Charging Cable (Type-C)
1x Type-C to FC Adapter
1x Prop Removal Tool
4x Gemfan 2020 4-Blades Prop (Spare Set)
1x Portable Storage Bag
FAQ
For more info and instructions, please check the User Manual for Cetus X FPV Kit.
Please DO NOT configure ESC or Motor settings on the Betaflight configurator.
The VR03 FPV goggles do not include a Micro SD card. You should prepare it before using the DVR recording function.
The External TX module for LiteRadio 3 should be bought separately. Recommend BETAFPV Nano TX Module.
