Hexfly C6D Mini LiPo/NIMH Charger Hexfly HX-c6d mini AC Balance Charger. This is a rapid charger/discharger with a built in balancer, microprocessor and advanced operating software
Operating Voltage Range: AC100.0-240.0 Volt
Circuit Power: Max .60W for charging, Max .10W for discharging
Charge Current Range: 0.1~6.0A
Discharge Current Range: 0.1~2.0A
Current Drain for balancing Li-Po: 300mAh/cell
NiCd/NiMh battery cell count: 6-8S
Lithium Battery cell count: 2-4S
Pb battery voltage: 6V(3P)-12V(6P)
Weight: 302g
Dimensions: 115x112x55mm
This product was added to our catalog on January 2, 2022
RER15247, Hexfly Pro X2 Charger
Features
80W Dual Charging Circuit
Sleek Space Saving Design
Lithium Cell Voltage Monitoring
Multiple Chemistry Charging
Specifications
Dual Input Power (AC/DC) - Input AC: 100-240V; Input DC: 11-18V Max
Circuit Power: 80W for charging max(x2); 5W for discharging
Charge current range - 0.1~7.0A
Discharge current range - 0.1~1.0A
Current drain for balancing LiPo - 300mAh/cell 1-15 cells
niCd/NiMH battery cell count - 1-15 Cells
Lithium battery cell count - 1-6 Series
Pb battery voltage - 2 to 20V
This product was added to our catalog on April 29, 2022
Redcat Lightning EPX Drift 1/10 RTR 4WD Touring Car
The Redcat 1/10 RTR 4WD Lightning EPX Drift Kit features a combination of 27T 540 brushed motor and drift specific RC tires that allow the Lightning EPX Drift to slide effortlessly around corners, while maintaining a steady forward momentum. Its lightweight plastic chassis allows for quick drift recovery and almost effortless changes in direction. A forward and reverse ESC allow the Lightning EPX Drift to back out of trouble while the 2.4GHz radio system provides reliable control for maneuvering multiple corners in a matter of seconds. The Lightning EPX Drift’s aluminum capped oil filled shocks with selectable mounting positions, tunable 4-wheel independent suspension, adjustable ride height, adjustable toe angle, and adjustable camber angle allow drivers to tune for any track and driving style. Ready to run, the Lightning EPX Drift includes a rechargeable battery pack, battery charger, and 2.4GHz radio system.
Features:
1/10 scale drift car, Scale drift tires, 5-Star rims, Independent suspension, Lightweight plastic chassis w/ aluminum top plate, Oil filled shocks, Bearings throughout.
Tunable suspension, Adjustable ride height, Adjustable toe angle, Adjustable camber angle, Tunable shocks, Selectable shock positions.
Realistic drift car body, Hard drift tires, Shaft driven 4 Wheel drive.
19T RC550 Brushed Electric Motor, 40a Waterproof ESC, Powerful steering servo, 2.4GHz radio.
Assembled & Ready to Run - Includes 7.2V 2000mAh NIMH rechargeable battery with NiMH battery charger - Requires AA Batteries for transmitter.
Specifications:
Vehicle Scale: 1/10
Servo Type: Qty 1 Hi-Torque Servo for Steering
Radio System: 2.4GHz Radio System
Transmission: Forward and Reverse
Wheelbase: 260mm
Battery: 7.2v 2000mAh NiMh & Charger Included
Length: 360mm
Ground Clearance: 4.5mm
Needed to Run: 8 AA Batteries for Remote Control
Width: 200mm
Chassis Type: Plastic
Height: 112mm
Speed Control Type: 40a Brushed Waterproof ESC
Includes:
7.2V 2000mAh NIMH rechargeable battery
NiMH battery charger
Needed to Complete:
AA batteries for transmitter
This product was added to our catalog on March 23, 2021
PRODUCT FEATURES
The Redcat Volcano EPX Pro 1:10 scale RTR Monster Truck gets a makeover, with a new body, wheels and tires. Vehicle battery and charger are sold separately.
Fast and powerful, the Volcano EPX Pro is ready to run (battery & charger not included) and includes a 3300KV RC540 brushless electric motor, waterproof 60A electronic speed controller (ESC), powerful 6Kg steering servo, and our proven 2.4GHz radio system. Add your own battery charger or we recommend the Hexfly 5800 MAh 7.4V LiPo battery pack and the Hexfly HX-403 LiPO balance charger are a perfect fit.
The Volcano EPX pro uses a lightweight and durable molded plastic chassis with an aluminum upper brace plate for added rigidity. Low center of gravity gives the Volcano EPX Pro nimble handling while maintaining that aggressive monster truck look we all love. The Volcano EPX Pro’s rugged looking body includes hard plastic skid plates on the roof and rear spoiler. These hard plastic components not only add protection from rollovers and crashes, they also look amazing. Large white Redcat lettering rides inside each of the Volcano EPX Pro’s sporty looking 10-spoke wheels to set off the appearance of this incredible looking monster truck.
The Volcano EPX Pro is fully adjustable and upgradable. A total of eight aluminum threaded body oil filled shocks are easily adjusted by twisting the spring tension collars and are completely tunable with aftermarket shock oils, pistons, and/or springs. The included dual-rate springs are designed to offer superior handling over small bumps and large jumps alike. There are also several upper and lower shock mounting positions for dialing in performance even further. Tunable metal gear sealed differentials, four wheel independent suspension, adjustable metal turnbuckles, and aggressive monster truck tires allow the driver to get loads of traction on many different surfaces while a complete set of bearings provide smooth and reliable power delivery.
The adjustable metal turnbuckles allow the driver to fine tune camber and toe angle for the very best performance handling on any surface or race track. The Volcano EPX Pro monster truck is a fully tunable hobby grade RC monster truck and comes pre-tuned for most driving situations.
The Volcano EPX Pro is among the best selling RTR monster trucks of all time for a reason. Not only is it exciting to drive and really fast, the Volcano EPX Pro has huge parts support with many available custom aftermarket parts, including color anodized machined aluminum parts, as well as a large selection of other performance options.
The Volcano EPX Pro, with brushless power system and 2.4GHz radio, is erupting with excitement. Pull the throttle and get your adrenaline flowing with this 1:10 scale, 4WD, RTR brushless monster truck. Buy yours today! Battery and charger not included.
• 4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, (8) Aluminum body oil filled shocks, front and rear gear differentials, Bearings Throughout.
• Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle.
• Aggressive tires, Independent suspension, Low center of gravity chassis for high speed performance, Ball bearings throughout.
• 3300KV RC540 Brushless Electric Motor, Waterproof 60A ESC, Waterproof high torque steering servo, 2.4GHz radio system.
• Assembled & Ready to Run - Requires LiPO Battery, LiPO safe Battery charger, and 4-AA Batteries for Transmitter.
RER06398, Redcat 7.4V 5800mAh 2S 30C LiPo: HXT4 Banana Connector
Specifications:
Connector Type Banana
Battery Voltage 7.4V
This product was added to our catalog on March 27, 2021
RER1704, Redcat RDS 1/10 2WD Ready to Run Brushless Drift Car
We’ve been banging on the doors of the competition with the RDS 1:10 scale brushless electric 2WD competition Spec drift car.The RDS is ready to run and includes all the necessary radio gear and electronics to get you on the track quickly. Since battery size and weight are a tuning preference, the RDS does not include a battery or charger. The RDS will accept a competition style 2S shorty LiPo pack, LCG 2S shorty pack, or a standard sized 2S stick pack.
We’ve engineered the RDS from the ground up, for a specific purpose, to compete. The RDS is a highly competitive rear wheel drive drift car that excels on surfaces which are found on many prepared RC drift tracks, such as carpet, p-tile, and polished concrete. The RDS can also be used on unpolished concrete and asphalt, though you may not get to experience its full potential on these rougher surfaces.
The RDS is ready to run and includes a 2.4GHz radio system, 540 3300kv brushless motor, 60A brushless ESC, coreless digital Hexfly Drift-Spec steering servo and a drift specific gyro. Gyros are a necessity on rear wheel drive drift cars as they allow the driver to achieve true-to-scale door to door drift action. The included Hexfly GX-1 gyro automatically countersteers the car, enabling it to maintain a smooth arc through drifts. The amount of automatic countersteer can be fine tuned by adjusting the amount of gain on the gyro.
Competitive drifting is based on line, angle, and style. How close someone is to the ideal line, having maximum angle throughout the run, moving through the course quickly and having minimal corrections after committing to an angle are what judges look for. While this is mostly achieved by skill, it is also necessary to have a predictable drift car that is adjustable to your driving style. The RDS excels in this area with its lightweight carbon fiber based chassis and adjustability. Everything on the RDS is adjustable to suit the driver’s needs, including camber, caster, toe, ackerman, roll center, wheelbase and center of gravity. The motor plate can be mounted in three different positions, altering the car’s chassis roll and weight bias. This can be used to adjust the amount of traction and chassis roll the RDS has on different surfaces. Being able to fine tune ackerman is important in drifting as it directly affects corner speed. The RDS has multiple steering link positions and a sliding ackerman plate, making it easy to fine tune ackerman. The RDS is loaded with tuning capabilities that will suit even the most advanced drivers.
The included RDS body not only looks amazing, but it is ready to accept an LED light kit. LED light kits are sold separately. The RDS has front and rear light buckets that are ready to accept four LED lights in the rear and two up front. Whether it’s day or night, the RDS looks trick.
While the RDS is an advanced competition spec drift car, it is also a perfect choice for beginners and is already set up out of the box for polished concrete and p-tile surfaces. This means someone learning to drift can open up the RDS and start practicing with the factory settings. We are releasing several how-to videos that include beginner drifting, advanced drift techniques, initial vehicle setup, advanced chassis tuning and understanding how drift competitions work.
These videos are hosted by a seasoned drifter who owns and operates one of the largest drift tracks in the US. He will share his wealth of drifting knowledge to help you become more confident and competitive with your new RDS competition spec drift car, regardless of your current skill level. Whether you’re a novice or a pro, check out the all new RDS competition spec rear wheel drive drift car today.
Specifications
• RDS: Fully Assembled with Electronics and Radio Gear
• Electronics: 540 3300kv Brushless Motor / 60A Brushless ESC / GX-1 Drift Gyro
• Steering Servo: Hexfly Coreless Drift-Spec Digital Servo.
• Radio: 2.4GHz radio system
• Chassis: Carbon Fiber Upper and Lower Deck
• Drive System: 2-Wheel-Drive
• Transmission: Single-Speed with 3 Motor Positions For Adjusting CG & Weight Bias
• Length: 445mm Stock
• Wheelbase: 253mm - 261mm Adjustable, Stock is 257mm
• Suspension: 4 Coil Over Shocks / Sliding Adjustable Ackerman
• Wheels: 6-Spoke Rims with Scale Wheel Nut Covers
Needed to Complete
• 4 AA Batteries for Transmitter
• Battery and Charger for vehicle
NOTE:
The depicted decals and battery shown in the photo are for illustrative purposes only. The RDS you receive will require the decals to be added. The battery is sold separately.
Redcat recommends the user checks the steering endpoints through the drift gyro prior to use. Please check with the user manual to perform this.
This product was added to our catalog on February 10, 2023
Lightning STK 1/10 Scale Electric
PRODUCT FEATURES
If you're into Stock Car racing, you'll love the Redcat Racing Lightning STK! Designed to look and handle like a full sized Stock Car, the Lightning STK is a blast to drive. Get some of your friends together and create a Stock Car race series of your own.
Become your own crew chief with the Lightning STK's fully tunable independent suspension, tunable oil filled shocks, multiple shock positions, adjustable camber, adjustable toe angle, adjustable chassis clearance, adjustable body height, and tunable gear differentials. Add a rear wing and scale on road racing tires to all that tunability, and you've got a highly capable race car that can help prepare you for track tuning full sized race cars.
Adjust suspension preload on the aluminum capped oil filled shocks, using the included preload collars, or completely change spring tension and stiffness by installing after market springs. Varying weight aftermarket shock oils can also be used for a large array of shock dampening options. The Lightning STK also has a large selection of performance parts available, including those machined from high quality aluminum.
Ready to run, the Lightning STK includes a 19T RC550 brushed electric motor, 40a waterproof ESC, precision steering servo, 2.4GHz radio system, 7.2v 2000mAh NiMH rechargeable battery, and a NiMH battery charger.
The forward and reverse electronic speed controller allows the Lightning STK to back out of pile ups in turn four, while the 2.4GHz precision radio system allows you to weave in and out of lap traffic with complete control.
Get your Lightning STK today and take home the checkered flag!
1/10 scale on road race car, Shaft driven 4 wheel drive, Independent suspension, Lightweight plastic chassis w/ aluminum top plate, Oil filled shocks, Front and rear gear differentials, Ball bearings throughout.
Tunable suspension, Adjustable ride height, Adjustable toe angle, Adjustable camber angle, Tunable shocks, Selectable shock positions, Tunable gear differentials.
Detailed Stock Car body, Molded plastic rear wing, Realistic tires w/ high speed dish wheels
19T RC550 brushed electric motor, 40a Waterproof ESC, Precision steering servo, 2.4GHz radio system.
BS205-011, RER04389, Road Wheels, Chrome
Quantity Included - 2
Hex Size - 12mm
Pre Glued - Yes
Rim Color - Chrome
Overall Width - 26mm
Overall Diameter - 64mm
Offset - 15mm
This product was added to our catalog on December 16, 2021
BS204-010, RER08190, 1/10th Drift Wheel and Tire (Black Chrome) (1pr)
Quantity Included - 2
Hex Size - 12mm
Pre Glued - Yes
Rim Color - Black
Overall Width - 25mm
Overall Diameter - 61mm
Offset - 15mm
This product was added to our catalog on December 16, 2021
PRODUCT FEATURES
90mm Front/Rear Dog Bones (2pcs)
Primarily used in Volcano EPX/EPX Pro series from differential to the wheels.
Specifications:
90mm End to End
84mm Pin to Pin
PRODUCT FEATURES
2S Hardcase LiPo (7.4V/5800mah) 30C Battery w/ Deans Connector
Recommended charge rate: 1C(1xCapacity) or 5.8ampsFull Charge will read 8.4 volts, Do not store fully charged.Number of cells: 2 cell
Connector: Deans/T-Plug
Dimensions: 139x47x25.3mm
This product was added to our catalog on September 25, 2021
RER03656, Redcat Tamiya to Banana 4.0 Plug Adapter (Male Tamiya to Female Banana)
Redcat Racing Male Tamiya to Female Banana 4.0 Connector Adapter. This adapter will allow you to use a battery pack with a Tamiya Style connector on your Redcat model that is equipped with Banana 4.0 connectors.
This product was added to our catalog on December 15, 2021
PRODUCT FEATURES
Are you ready for Car crushing, dirt slinging, Monster Truck action? Then you’re ready for the very first 1:10th scale solid-axle RTR RC monster truck that ever hit the RC market, the Ground Pounder!
Developed, prototyped and tested by Crawford Performance Engineering, the Ground Pounder is truly an RC marvel.
With a beautifully styled body, aluminum “tube style” frame, mid motor shaft driven 4WD, solid axles, four link suspension, and aluminum threaded body oil filled coil-over shocks, you won’t know whether to display the Ground Pounder on a shelf or get it dirty in the yard. This 1:10th scale monster truck was designed to look and perform like the real thing.
A powerful brushed 540 electric motor is mounted mid frame, for even weight distribution, just like the full scale monster trucks. Forward and reverse are possible through the brushed ESC, though you may find yourself just driving over everything in its path. Ready to run, the Ground Pounder monster truck includes a rechargeable NiMH battery pack, NiMH charger, and 2.4GHz 3-channel radio.
4-mode 4 wheel steering allows you to have control of the front wheels, as well as the rear wheels, just like a full size monster truck! Cycling through all four of the steering modes is as easy as pushing a button. The 4-mode steering button is conveniently located on the transmitter handle, where your thumb rests. Quickly cycle through “front steer”, “rear steer”, “front and rear steer”, and “crab steer” modes, just like the full size monster trucks!
If you like monster trucks, you’ll love the ground pounder! Get your Ground Pounder 1/10 scale monster truck today!
Shaft driven monster truck, Solid axle 4 Wheel drive, 4 link suspension, 4-mode 4 Wheel steering, 2 Steering servos, 3-channel 2.4GHz radio, Aluminum "tube style" chassis, Oil filled shocks, Ball bearings throughout.
Tunable suspension, Adjustable ride height, Adjustable toe angle, Adjustable suspension links, Tunable shocks, Selectable shock positions, 4 Selectable steering modes.
Realistic body modeled after the real Ground Pounder monster truck, Big monster truck tires, Realistic looking monster truck chassis.
20T RC540 Brushed electric motor, Waterproof 40a brushed ESC, 2x Powerful steering servos, 3-channel 2.4GHz pistol grip radio.
Assembled & Ready to Run - Includes 7.2V 2000mAh NiMH rechargeable battery and NiMH battery charger - Requires AA Batteries for transmitter.
