BDYDG-ZL21, Bittydesign ZL21 1/10 Pro No Prep Street Eliminator Drag Racing Body (Clear)
The Bittydesign ZL21 Pro Drag Racing Body was developed to provide racers with an extraordinary looking body, that has the aerodynamics and quality needed to give an edge over the competition. Taking cues from modern muscle car design, the ZL21 offers an incredibly aggressive appearance, manufactured with Bittydesign's obsessive quality standards. But the ZL21 offers more than just a breathtaking look! The advanced aerodynamics help to put all the power to the ground, providing incredible stability under acceleration in a platform that makes it a great choice for both prep track street eliminator class, as well as parking lot no prep racing.
Accessories that make the difference!
Every detail was considered during the design phase. The ZL21 includes a variety of accessory parts that add detail, and aid in performance. A rear wing extension is included to improve performance, helping to generate clean air and reduce turbulence in the rear of the car. A front splitter is included to create a more aggressive appearance, as well as help increase front end stability. Plus, a set of zoomie style pipes and turbo style exhaust are included to add more detail and can be installed if you choose. But that's not all - if the ultimate performance is desired, the optional Pro-drag wing is available (BDYDG-ZL21W - not included) to create an even more aggressive look and increase rear end stability.
NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.
Features:
Advanced aerodynamic design for no prep/street eliminator racing
Molded from genuine 1mm thick Lexan® polycarbonate
Includes rear wing, front splitter and two exhaust options
Optional Pro-drag wing is available separately (BDYDG-ZL21W - not included)
Accessory installation hardware included
Sold clear with overspray film applied
Includes pre-cut decal sheet and the window mask
Specifications:
Length: 640mm
Width: 280mm
Height: 164mm
Wheelbase: 330mm
NOTE: The body shell was designed on the Associated DR10 chassis, but can also be mounted on Losi 22S Drag chassis, Traxxas Slash* 2wd Drag Car & Traxxas Drag Slash 1/10. For installation on Slash 2wd chassis it is necessary to purchase the following Traxxas parts: TRA2531X, TRA3636, TRA2750R, TRA2432, TRA2444, TRA2437, TRA3740, TRA2445, TRA2443, shorten rear drive shafts and remove the front bumper.
Exhaust Installation:
Choose which exhaust to install, and paint.
Remove material along cut lines with quality scissors or dremel - remove the longer section to install the zoomie style pipes, and the shorter section to install the single turbo pipe.
Apply double sided tape over the exhaust plate and press it inside the body to secure the exhaust to the body.
This product was added to our catalog on December 16, 2021
This Bittydesign Vinyl Paint Stencil is brought to you by the proven designers of Bitty's countless, popular custom painted bodies. Now Bitty has developed a series of clever cut-out stencil templates, created to allow hobby painters to add their own patterns and depth to different paint designs. This reusable stencil is made from a flexible, ultra-thin vinyl material, die-cut and ready for application. Available in multiple cut-out styles and variations to allow the painter to create their own unique paint style.
BDYDG-M550, Bittydesign M-550 1/10 Pro No Prep Street Eliminator Drag Racing Body (Clear)
The Bittydesign M-550 Pro Drag Racing Body was designed specifically for the "No Prep" drag racing category. Taking some style from one of the most iconic American muscle cars, the M-550 gives you killer looks while staying within the rules of the No Prep Street category. From the aggressive front end styling to the smooth rear transitions, this body will give racers a perfect balance of performance and aesthetics.Accessories that make the difference!The M-550 includes both a front splitter and a rear wing to aid in straight line performance. The front splitter is mounted using the included hardware and will aid in front end stability. The rear wing is also mounted with the included hardware and will improve the air turbulence generated over the rear chassis.NOTE: Painted body shown in photos is for illustrative purposes only. The product you will receive is clear and unpainted.Features:
Advanced aerodynamic design for no prep/street eliminator racing
Molded from genuine 1mm thick Lexan® polycarbonate
Includes rear wing and front splitter
Accessory installation hardware included
Sold clear with overspray film applied
Includes pre-cut decal sheet and the window mask
Specifications:
Length: 645mm
Width: 275mm
Height: 150mm
Wheelbase: 330mm
NOTE: The body shell was designed on the Associated DR10 chassis, but can also be mounted on Losi 22S Drag chassis, Traxxas Slash* 2wd Drag Car & Traxxas Drag Slash 1/10. For installation on Slash 2wd chassis it is necessary to purchase the following Traxxas parts: TRA2531X, TRA3636, TRA2750R, TRA2432, TRA2444, TRA2437, TRA3740, TRA2445, TRA2443, shorten rear drive shafts and remove the front bumper.Includes:
(1) Clear M550 1/10 Pro No Prep Street Eliminator Drag Racing Body
(1) Decal Sheet
(1) Window Mask Sheet
Hardware
This product was added to our catalog on February 18, 2022
BDYGT7-S65, Bittydesign Seven65 1/7 GT Supercar Body (Clear) (Arrma Infraction/Limitless)
The Bittydesign Seven65 Arrma Infraction/Limitless 1/7 GT Supercar Body is inspired by british GT3 supercars. The Seven65 body shell was developed over several months with every detail optimized in order to create an exotic, ultra low CG, super aerodynamic and realistic looking body for 1/7 scale options from Arrma and Traxxas. Designed for the Infraction series, this body also fits the Limitless with the additional parts listed below.
Combine this with the Bittydesign Foam Front Bumper (BDYARA-FOMS65) to help eliminate turbulence that is generated under the model.
Important: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
Details:
The body shell has been designed on the ARRMA® Infraction™
Compatible with Limitless™ with minor modification.
Made with high quality and genuine polycarbonate Lexan®, 1.5mm thick
Includes a complete set of screws, nuts and large plastic washers to properly attach the included rear wing
Also fits Traxxas® XO-1™ chassis with modification
Sold clear with protective film outside
Includes body, wing, decals, window masks and hardware
Installation on Limitless applications requires the following optional parts:
Front Bumper Support: ARA320521
Front Splitter: ARA320520 or XTR12381
Bittydesign Foam Front Bumper: BDYARA-FOMS65
Rear Body Mount Frame Set: ARA320516
Body Post Mount Set: ARA320517
Body Post Set: ARA320357
Specifications:
Length: 710mm
Width: 310mm
Height: 155mm
Wheelbase: 406mm (with ARRMA DBoots Hoons wheels diameter 100x43mm, ARA550070)
This product was added to our catalog on December 16, 2021
BDYFRC-K003WAVY, Bittydesign "Force" Kyosho MP9 TKI2/3/4 1/8 Pre-Painted Buggy Body (Wave/Yellow)This product was added to our catalog on December 16, 2021
