TRA2970-3S, Traxxas EZ-Peak 3S Single "Completer Pack" Multi-Chemistry Battery Charger w/One Power Cell Battery (5000mAh)
NOTE: Traxxas VXL Brushless models are 3S/2S LiPo compatible; XL-5 Brushed models are only 2S LiPo compatible! Keep this in mind when choosing a battery for your Traxxas model.
This is the Traxxas EZ-Peak Multi-Chemistry Battery Charger System with an included "Power Cell" 4000mAh LiPo battery. This charging system uses the Traxxas iD Battery Identification System and is a great solution when you need a battery and charger for your Traxxas vehicle that runs one 3S LiPo battery.
iD Simplicity
With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. The Traxxas iD battery system is the easiest and safest way to charge your Traxxas batteries. The EZ-Peak Plus recognizes Traxxas iD batteries and in an instant automatically configures and optimizes the charger settings. There's no need to be a battery expert or learn how to navigate complex menus. Just plug in a Traxxas iD battery and the EZ-Peak Plus does all the work for you. The integrated balance connector on Traxxas LiPo iD batteries eliminates fragile balance wires and connectors, along with the need for external balance boards. At the press of a button, the EZ-Peak Plus' Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. 4-amp fast charging and advanced high-resolution peak detection deliver a perfect charge every time. The EZ-Peak Plus is backed by the Traxxas Lifetime Electronics Manufacturer Warranty for years of reliable service.
TRA2970 Charger Specifications:
AC Input: 100–240 Volts
Charge Current Range: 1.0-4.0A (40W Max.)
Discharge Current Range: 500mAh
Current Drain For Balance Ports: 500mAh
NiMH Battery Cell Count: 5–8 Cells
LiPo Cell Count: 2–3 Cells
Net Weight: 365g
Dimensions: 146 x 123 x 53mm
TRA2872X Battery Specifications:
Type: LiPo
Total Capacity: 5000
Voltage: 11.1
Continuous Discharge: 25C (125A)
Max Burst Rate: 50C (250A)
Watt Hours: 55.5
Charge Rate: 1C (5A)
Max Charge Rate: 2C (10A)
Dimensions: 155x26x44mm
Weight: 13.3oz (376g)
Includes:
(1) TRA2970: Battery Charger
(1) TRA2872X: 5000mAh 3S 25C LiPo Battery w/iD
This product was added to our catalog on April 12, 2021
TRA2849X, Traxxas 3S "Power Cell" 25C LiPo Battery w/iD Traxxas Connector (11.1V/4000mAh)
NOTE: Traxxas VXL Brushless models are 3S/2S LiPo compatible; XL-5 Brushed models are only 2S LiPo compatible! Keep this in mind when choosing a battery for your Traxxas model.
This is the Traxxas 3S, 11.1V, 4000mAh, 25C "Power Cell" Li-Poly Battery Pack with iD Traxxas Connector. This battery requires a Traxxas iD equipped LiPo charger to balance-charge!
Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Available in a full range of capacities in 2-cell (2S) and 3-cell (3S) configurations, Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available.
High-Current Connector
Revolutionary concepts come in all shapes and sizes, and the patented Traxxas High-Current Connector defines the new standard for efficiency, ease of use, and high-current handling. On iD-equipped Traxxas LiPo batteries, the balance connectors are integrated into the Traxxas High-Current Connector eliminating fragile balance wires and connectors, along with the need for external balance boards.
With today's brushless motors and high-density, high-discharge battery packs, using a wimpy connector is like attaching a garden hose to a fire hydrant. The pressure is there but the flow is strangled with resistance. Traditional connectors are simply not up to the task.
The patented Traxxas High-Current Connector flows current like a firehose with virtually zero voltage loss due to power-robbing resistance. The patented Traxxas connector is a better-engineered solution for real-world use. Large, textured surfaces on the plug bodies are easy for fingers to grip and the clever reverse-polarity protection makes Traxxas High-Current Connectors virtually impossible to plug in backwards. Shrouded wire connections eliminate the extra steps to install heat shrink tubing. Beefy, gold-plated copper terminals with large, spring-loaded contact areas ensure a perfect connection every time. Even after thousands of uses, Traxxas High Current Connectors maintain their precision feel and incredibly low resistance.
NOTE: Traxxas LiPo Batteries should only be used in vehicles equipped with low voltage protection.
Features:
Semi-Rigid Construction: Traxxas Power Cell LiPO packs use a unique construction method that results in a firm, rugged, and compact pack that does not require a hard case. This allows Power Cell LiPo's to offer greater capacity in a given size, and also allows the user to easily monitor the condition of their battery. Unlike a hard-cased pack, if a Power Cell LiPo "puffs" or softens due to damage or abuse, the user can easily see and feel the change in the pack. Plus, there are no wire harness connectors that can loosen and fail over time.
Oversized Discharge Tabs: Power Cell LiPo's are constructed of premium cells with extra-wide discharge tabs. The discharge tabs are the actual contact points between the cells, so maximizing their surface area is critical to maximize pack performance. Power Cell LiPOs' extra-wide tabs ensure minimum resistance so more power and capacity is delivered on every run.
Hard-Wired for Maximum Durability and Performance: Power Cell LiPo packs feature High Current Connectors with 12-gauge Maxx Cable wire, soldered directly to the LiPo cells. Bullet connectors found on other packs introduce additional connections, increase resistance, and allow accidental reversed-polarity connections. Power Cell LiPo's rugged, hard-wired connection minimizes resistance to make sure all the power from your battery is used for greater speed and longer run times.
Maxx Cable: Every component of a battery pack contributes to its performance—and that includes the wires. Traxxas Maxx® Cable's 12AWG multi-strand wire offers extremely low resistance so power is not wasted as heat, and the fine strands allow excellent flexibility for easy installation and reduced stress on the pack's solder joints. Soft, silicone insulation protects against shorting without compromising flexibility. Maxx Cable is simply the finest and most efficient wire available, and the only wire good enough for Traxxas Power Cell battery packs.
Center Wire Exit: Traxxas LiPo packs have a center wire exit to properly fit Traxxas models with wire reliefs in the chassis. You get perfect battery fit without crushed wires or cut insulation—that means longer life for your LiPo battery.
Factory Fit: Traxxas Power Cell LiPo's are designed to fit Traxxas models so you get the most capacity possible. Forget the foam blocks! Special "7-Cell" sized pack configurations maximize the capacity in your Slash, Slash 4x4 and other Traxxas models. The wires exit from the center of the pack to line up with the relief channels in Traxxas' chassis for a pinch-free fit. There are packs for every Traxxas vehicle, each guaranteed to fit properly and deliver the performance built into our models.
Lifetime Battery Exchange Program: Traxxas stands by Power Cell LiPo batteries with the best warranty and exchange program available. For the first year of ownership, Traxxas will replace any battery found to be defective at no cost. After one year, any Power Cell LiPo battery in any condition can be exchanged for a new equivalent battery for just 50% of the new pack's list price, no questions asked!
Specifications:
Type: LiPo
Total Capacity: 4000
Voltage: 11.1
Continuous Discharge: 25C (100A)
Max Burst Rate: 50C (200A)
Watt Hours: 44.40
Max Charge Rate: 2C (8A)
Dimensions: 135x26x43mm
Weight: 11.1oz (316g)
This product was added to our catalog on September 7, 2021
PTK-5117-22, ProTek RC 2S 130C Low IR Si-Graphene + HV LCG Shorty LiPo Battery (7.6V/4800mAh) w/5mm Connectors (ROAR Approved)
The ProTek R/C 2S 130C Graphene + HV 4200mAh Shorty LiPo Battery is a great battery option for anyone looking for a lightweight, shorty style battery. Weighing only 170 grams, the HV Shorty is lighter than a standard shorty pack, with a massive increase in capacity. When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage.
This pack is ideal pack for 2WD and 4WD modified racing, or stock class racers that want optimum voltage for the entire run. This pack is also a great choice for 1/8 e-buggies that want to run a lightweight 2x2S saddle pack configuration. The improved efficiency of this pack will allow for lower operating temperatures and lower internal resistance. This gives users a more consistent battery pack. ProTek Graphene + 130C Packs deliver the power needed by serious racers and enthusiasts alike.
Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for racers and bashers that demand the absolute best.
Features:
Lighter than a hardcase 2S LiPo pack of equal capacity
More runtime, with a dramatic increase in voltage and punch
Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery
Improved efficiency, lower operating temperatures, and lower internal resistance!
Increased run time, increased cycle life and increased voltage!
More capacity gram for gram when compared to standard LiPo cells
Perfect for stock class racers looking to shave grams
10C max charge rates - 1C charge rate recommended for longest life
7.6V nominal voltage
5mm bullets and 5mm to 4mm bullet adapters included
NOTE: While these batteries are LiHV cells, they can still be charged the same as a standard LiPo with a standard LiPo charger. The overall voltage and capacity will be slightly less than when charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the flat discharge curve, reduced weight and low internal resistance. When charged to 8.4V, these packs will still offer a noticeable advantage when compared to a standard 7.4V LiPo pack.
Battery Model
2S HV LiPo
ROAR Approved
Yes
Type
Silicon Graphene
Voltage
7.6V
Capacity @7.4V
4200mAh
Capacity @7.6V
4800mAh
Weight
170g
Connector Type
5mm Bullet
Balance Connector
2mm Bullet
Number of Cells
2 Cell
Configuration
2S1P
Dimensions (WxLxH)
47x96x20mm
Maximum Charge Rate
10C (48A)
Burst Current
130C
Watt Hour @7.6V
36.5 Wh
Includes:
(1) ProTek R/C Battery
(2) 5mm to 4mm Bullet Reducers
(2) 5mm Bullet Connectors
(1) 2mm Balance Bullet Connector
This product was added to our catalog on May 21, 2023
TRIREV2034-5, 2S 7.4V 4000MAH 110C 220C Burst LiPo Drag Racing Battery Pack, No PlugEach Revtech Drag Racing LiPo battery is produced with higher grade safer materials, which results in longer battery life. The new assembly technology limits "cell puffing" resulting in a more durable and impact resistant battery.POWER Yourself to the Next Level with a Revtech LiPo Pack!
Battery Size: 2 Cell Small Soft Pack
Weight 208g avg
8 Gauge Wire
Balance Connector: XH
Number of Cells: 2
Dimensions (LxWxH) (mm): 92x44x23mm
Maximum Charge Rate: 1C = 4amps
Continuous Discharge "C" : 110C, 220C Burst
Watt Hour @7.4V: 29.60wh
GEA40002S60D8, Gens Ace 2s LiPo Battery 60C (7.4V/4000mAh) w/T-Style Connector
GensAce batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All GensAce batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery.
Additionally this Gens Ace Battery features Sub-C style "Bumps" on the bottom of the case to mimic the fit of NiMh batteries which are commonly found on touring car style chassis. However this battery can be used normally in a wide variety of vehicles which makes it extremely flexible with applications.
Gens Ace LiPo Battery Packs
NOTE:
When used with Traxxas 2S applications, you may need the optional extended battery strap.
Slash & Slash 4x4
Stampede/Rustler/Bandit
Stampede 4x4
Some vehicles may require some re-balancing if the light weight of these batteries cause some handling changes. To get the vehicle to balance correctly, add some weight to the battery side of the vehicle.
Specifications:
Voltage: 7.4
Cell Count: 2S
Capacity: 4000mAh
Discharge: 60C
Dimensions: 138x48x24mm
Weight: 240g
This product was added to our catalog on May 11, 2022
SPMX40002SRX, Spektrum RC 2S Smart LiPo Battery Pack (7.4V/4000mAh) w/IC3 Connector
This is a Spektrum 2S Smart LiPo Battery Pack with IC3 Connector Spektrum Smart technology LiPo Batteries practically take care of themselves. When combined with a Spektrum Smart Battery Charger, the unique parameters, history of the battery and more are all available the instant it’s connected. Charging a Smart Battery is easy as it gets, plus Smart LiPo battery packs are programmable to meet your exact charging needs. But the crowning feature of a Spektrum Smart LiPo battery is that it can be programmed to safely self-discharge to storage condition!
Spektrum Smart technology puts you in complete control, makes you more aware and more confident about the capability of your equipment—all the while making your hobby easier. The combined result will make you wish everything about your hobby was “smarter.”
You’ll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger “Start” button. Smart technology takes care of the rest.
Every Smart LiPo battery is factory assembled with the next-generation IC3 or IC5 output connector that’s conveniently compatible with older devices equipped with robust EC3 and EC5 connectors. You can use Smart Batteries with older systems, but only when connected to a Spektrum Smart device will all the benefits of Smart technology become obvious.
Spektrum Smart LiPo Batteries Store Unique Data, such as:
Battery Brand
Battery Type
Battery Capacity
Battery C Rating
Individual Cell Voltage
Battery Temperature
Charge/Discharge Cycles
Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you’ve chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the “Start” button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.
Features:
Spektrum Smart Technology Makes Charging and Maintaining Batteries Easy
Integrated Microchip Stores Unique Parameters for Each Battery
IC3 and IC5 Connectors are Compatible with EC3 and EC5
Save Time and Hassle, while Improving Battery Life
Smart Discharge Allows Batteries to Automatically Discharge to a Safe Voltage
Specifications:
Type: LiPo (3.7V per cell)
Voltage: 7.4V (2S)
Capacity: 4000mAh
Connector Type: IC3
Wire Gauge: 13 AWG
Watt Hours: 14.8
Maximum Charge Current: 1.5C
Maximum Charge Rate: 6.0A
Lead Length: 3.5" (90mm)
Length: 3.4" (86mm)
Width: 1.3" (34mm)
Height: 1.2" (30mm)
Weight: 6oz (170g)
Charge Protection Circuitry: Yes
Technology: Smart
Application: Receiver Pack
This product was added to our catalog on February 22, 2022
SPMX40004S30, Spektrum RC 4S Smart LiPo Battery Pack w/IC3 Connector (14.8V/4000mAh)
Spektrum 4S Smart LiPo Battery Pack with IC3 Connector. You'll never have to set charge preferences for a Spektrum Smart battery until you want to. When a Spektrum Smart LiPo battery is connected to a Spektrum Smart charger, unique parameters and health of that Smart LiPo battery upload from the Smart memory microchip integrated into the battery. Through the charger, you can view and set preferences, such as charge rates, so that all you have to do to charge the pack every time is press the charger "Start" button. Smart technology takes care of the rest.
Spektrum Smart 30C LiPos come in a variety of popular sizes and are ready to drop into your RC aircraft for better performance, power, and reliability. These are the perfect packs for high performance models and power systems and a great upgrade to get more punch and power on nearly any setup.
Spektrum Smart LiPo Batteries Store Unique Data, Such As:
Battery Brand
Battery Type
Battery Capacity
Battery C Rating
Individual Cell Voltage
Battery Temperature
Charge/Discharge Cycles
Spektrum Smart LiPo batteries also maintain an error log including the number of over-heat, over-discharge and over-charge incidents which can be helpful data in assuring that the battery you've chosen is right for the application. A Smart Battery uploads its charge parameters to a Spektrum Smart Charger automatically making charging as simple as pressing the "Start" button. The charge rate of every Smart Battery is customizable, allowing you to take full advantage of packs with faster charge ratings.
Features
Integrated microchip stores unique parameters for each battery
Smart discharge allows batteries to automatically discharge to a safe voltage
Save time and hassle, while improving battery life
Powerful 50C continuous discharge rating to deliver high performance and longevity
Protective outer metal alloy sheet helps dissipate heat, hold battery shape, and increase durability
No soldering required, equipped with IC3 and IC5 Connectors that are compatible with EC3 and EC5
50C battery packs are available in a variety of capacities and cell counts that are perfect for almost any application
Specifications:Capacity: 4000-4999mAhVoltage: 14.8VConnector Type: IC3Wire Gauge: 12Number of Cells: 4Weight: 13.2oz (375g)Configuration: 4S1PLength: 5.5 in (140mm)Width: 1.69 in (43mm)Height: 1.18in (30mm)Application: AircraftMaximum Continuous Discharge : 30C
CHARGING NOTE: This battery can only be safely charged with a Spektrum Smart Battery Charger. NEVER, UNDER ANY CIRCUMSTANCES, charge this battery using a non Spektrum Smart Battery Charger.
This product was added to our catalog on March 26, 2021
PTK-5116-20, ProTek RC 3S 120C Low IR Si-Graphene + HV Shorty LiPo Battery (11.4V/4500mAh)
The ProTek R/C 3S 130C Low IR Silicon Graphene + HV Shorty LiPo Battery was developed specifically for 1/10 scale rock crawler and rock racer applications. 3S packs that are commonly used in the crawler world are either small, low capacity packs - or large, heavy 4000-5000mAh packs. This 4800mAh battery fills the void and gives scalers a high capacity option that produces more voltage and longer runtimes than a 2200mAh. Plus, when charged at LiHV specs this battery produces 13.05V, instead of the standard 12.6V of a fully charged standard LiPo, meaning performance oriented enthusiasts can take advantage of the light weight, and higher voltage throughout the discharge curve to give them a more consistent power delivery with less fade on the course!
Want more reasons to run this pack? When compared to standard LiPo and LiHV, Silicon Graphene cells deliver improved efficiency, lower operating temperatures, lower internal resistance, better run time, increased cycle life and increased voltage - but Graphene + 130C LiPo batteries take that a step further with lower internal resistance, more power, and 300mAh more capacity when compared to the previous ProTek 3S LiHV!
Lab testing has shown that ProTek R/C Silicon Graphene packs have double the cycle life when charged at 1C rates, and can be charged at higher amp rates, with less risk of damage to the pack. More importantly, the discharge curve is flatter, meaning the cells maintain higher voltage throughout the discharge cycle with no significant drop off. Additionally, when compared to conventional LiPo batteries Silicon Graphene batteries are lighter, providing a higher capacity per gram ratio. With 7.6V nominal voltage, 130C discharge ratings, incredibly high charge rates and ten different models to choose from, ProTek R/C 130C Graphene + packs are perfect for enthusiasts that demand the absolute best.
Features:
Comparable weight to a 2200mAh pack, 100g lighter than EcoPower 4100mAh
15 grams heavier than the original LiHV 3600 3S battery, and 900mAh more capacity
Great choice for scalers and U4 racers
Great choice for pro class 3S drag racing, boats and airplanes too
Improved power to weight ratio and a lower overall CG
Silicone Graphene can handle more abuse and deliver more current than a standard LiPo battery
Improved efficiency, lower operating temperatures, and lower internal resistance!
Increased run time, increased cycle life and increased voltage!
More capacity gram for gram when compared to standard LiPo cells
10C max charge rates - 1C charge rate recommended for longest life
11.4V nominal voltage
NOTE: While these batteries are technically LiHV cells, they can still be charged with a standard LiPo charger. The overall voltage and capacity will be slightly less than if charged to LiHV specs, but the performance will be better than a standard LiPo thanks to the reduced weight and low internal resistance.
Battery Model
HV Shorty 3S LiPo
Application
Crawlers, Drag, Boats & Aircraft
Type
Silicon Graphene
Voltage
11.4V nominal
Capacity @11.1V
4300mAh
Capacity @11.4V
4800mAh
Weight
245g
Connector Type
T-Style
Balance Connector
4 Pin XH
Number of Cells
3 Cell
Configuration
3S1P
Dimensions (WxLxH)
43x93x25.7mm
Maximum Charge Rate
10C (45A)
Burst Current
130C
Watt Hour @11.4V
54.7Wh
Includes:
(1) ProTek R/C Battery w/T-Style Connector
LITHIUM POLYMER SAFETY INFORMATION
IMPORTANT:
DO NOT leave the battery in your model when charging
DO NOT leave unattended when charging
ALWAYS balance charge the battery
ALWAYS use a LiPo charging bag
YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCD only chargers WILL NOT WORK!)
YOU MUST not over discharge the Li-Poly battery pack
READ & UNDERSTAND the instructions carefully before operating this battery
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use the battery that has too low a voltage.
Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
This product was added to our catalog on December 16, 2021