KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger
The Kyosho Wave Chopper 2.0 Type 1 Electric Personal Water Craft brings fun to the water with the revival of the Wave Chopper! Originally released in 2001, the Wave Chopper 2.0 features modern RC technology and performance. A redesigned rudder, stern tube and motor mount in the 1/6th hull, and an updated rider figure are combined with the latest RC components to take this model into the next generation.
Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. The hull and rider are pre-assembled, so all you need to do is install four AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to get this model fully ready to run.
Features:
Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance
Built in water intake channels water into the cooling jacket on the motor for effective cooling
Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration
Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss
High rigidity suspended motor mount maximizes drive efficiency and easy maintenance
7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter
Specifications:
Length: 595mm
Width: 220mm
Height: 350mm
Weight: 1,600g approx.
Transmitter: KT-231P+
ESC: KYOSHO SPEED HOUSE KA060-91W
Servo: KS4031-06W
Motor: 550-class G14L motor with water-cooling jacket
Battery: 7.2V-2200mAh NiMH
Compatible battery size: 148x52x30mm or less (LxWxH)
Charger: Ni-MH battery dedicated USB charger
Propeller: D31xP1.4 (Polycarbonate)
Maximum speed: 24km/h approx.
Operation time: 5 min approx.
Includes:
Fully assembled hull
Syncro KT231P+ transmitter
Injection molded boat stand
Pre painted figure
Hex wrenches 1.5 & 2.5mm
Spanner 4.0 & 5.5mm
Antenna tube
7.2V 2200 mAh Ni-MH battery and USB delta peak charger
PVC tape for waterproofing
Needed to Complete:
(4) AA batteries for transmitter
This product was added to our catalog on May 3, 2023
CSE010016502, Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo w/1717 Sensored Motor (1650kV)
COMPATIBILITY:
Arrma Felony 6S BLX
Arrma Infraction 6S BLX
Arrma Infraction V2 6S BLX
Arrma Limitless
Arrma Outcast 8S BLX
The Castle Creations Mamba Monster X 8S 1/6 ESC/Motor Combo with 1717 Sensored Motor is an incredible combo developed specifically for high voltage large scale applications. The MAMBA MONSTER X 8S ESC utilizes Castle’s proprietary CRYO-DRIVE technology helping to reduce the heat generated, and remove heat more efficiently. These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a level never seen before.
Mamba Monster X 8S is a workhorse that will dominate in the harshest of environments. Designed with durability in mind, this ESC features a robust aluminum case, combined with epoxy potting helps to guarantee protection around the circuitry, as well as allowing all-weather use. You can easily optimize the ESC for any driving condition - rugged terrain, smooth pavement, or rock and gravel, the MMX8S can handle it all. Plus, the Castle Link Programming Suite will allow the user to create, save and download setup profiles using a Windows™ PC, or wirelessly with the convenience of the B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. The MMX8S also allows tuning on-the-fly via the Auxiliary wire, allowing access to programming parameters such as Torque Control, Max Brake or Rock Race Mode, further optimizing your vehicle for any racing or bashing application you can imagine!
When paired with the included Castle 1717-1650KV sensored motor, heavy, high speed rigs will experience controllable low-end control without sacrificing power, punch or speed. This motor is a blast from the past with the added benefit of sensored capabilities! It is the perfect upgrade for any 1/6th scale vehicles weighing up to 20 lbs and running up to 8s LiPo; it is also a great upgrade for drivers looking for a reliable, high torque 8s motor for their 1/8th scale vehicles! The Castle 1717 1650KV sensored motor features an improved 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs.
Application Guidelines: Mamba Monster X 8S and 1717-1650Kv motor is intended for use in 1:6 scale vehicles weighing up to 20 lbs. and running up to 8S LiPo. Also a great upgrade for heavier 1/8th vehicles.
Features:
ESC:
Input Voltage Range 2S-8S LiPo
Sensorless, Sensored and SmartSense™ Running Modes
Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V)
CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs
ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer
Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation
Oversized factory equipped thermally controlled 40MM cooling fan
Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters
Waterproof design for all weather conditions
Data logging capability to capture and record performance data from your vehicle
Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter
Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff
Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake
Easily tune and update ESC with USB and Bluetooth™ programming options
Castle Link USB programming kit (coupon included with purchase)
Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store
Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty
Motor:
4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat
Proprietary stator winding produces low internal resistance for a cooler running motor
Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life
High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs
Specifications:
ESC:
Input Voltage Range: MIN: 2S LiPo , MAX: 8S LiPo 33.6V
BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V
Operating Environment: Waterproof* design allows for use in nearly any environment.
Brake: Proportional
Reversible: Yes, but may be disabled for racing.
On/Off Switch: Yes, waterproof
Cooling Fan: Yes, factory equipped (40MM), fully removable** (see Product Use Statements below)
Size: L x W x H 69.5mm x 54.1mm x 47mm
Weight (with no battery connector): 5.75 oz. (163 grams)
Connectors: 6.5mm female bullets for motor connection.
Items Needed for Operation: A high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors, soldered to the battery leads.
Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Link included) and freely downloadable Castle Link Windows™ software, or the Castle Link iOS® or Android® app with B-LINK™ Bluetooth™ Adapter (sold separately).
Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX and T7PX transmitters.
Motor:
Input Voltage Range: 3S-8S LiPo
Kv: 1650
Max. RPM: 56,000
Size: Length: 3.35" (85.1mm) Diameter: 1.87" (47.6mm)
Weight (w/wires): 21.08oz. /597.6g
Shaft Diameter: 5mm
Mounting Hole Specifications: M3 and M4@25.4mm (1.0") Diameter
Cooling Fan: Not available
Connectors: 6.5mm male connectors
Application Guidelines: Ideal for vehicles up to 20lbs running 6s – 8s LiPo. Examples include Losi LST2-E; Arrma™: Limitless™, Typhon™ 6s, Infraction™, Talion™ 6s; Traxxas: E-Maxx™, E-Revo™, UDR™, Summit™; Redcat Shredder™
ESC Product Use Statements:
Recommended battery capacity for 1:6th scale vehicles is 5000mah. We recommend using 50C continuous discharge or higher LiPo batteries.
Surge ratings should never be used to determine a pack’s suitability for a brushless application.
Castle recommends a high current connector designed for high-powered electric systems, rated for 120+ amps, such as Castle CC Bullet 6.5mm, CC Bullet 8.0mm, or 6.5mm Polarized Castle Connectors.
Applying voltages higher than 33.6V will cause irreparable damage to ESC.
Although Mamba Monster X 8S is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC with clean water after exposure to corrosives or dirt.
The ESC cooling fan must be removed prior to driving in wet conditions. It is not waterproof.
Tech Notes:
This motor includes 10AWG wire and 6.5mm connectors for use specifically this ESC/Motor combo.
Running modes: SMARTSENSE™, Sensored, Sensorless with Castle sensored capable ESCs.
Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.
Includes:
Mamba Monster X 8S ESC
4-POLE Sensored 1717-1650KV Motor
Castle Sensor Harness Adapter
200mm Sensor Wire
Mamba Decals
Coupon for free Castle Link USB
ESC Quick Start Guide
Motor Quick Start Guide
This product was added to our catalog on June 23, 2021
PRO1019810, Pro-Line Badlands MX57 5.7" Pre-Mounted 1/6 Monster Truck Tires (Black) (2) (Z3) w/Raid Wheels
Pro-Line Badlands MX57 5.7" Pre-Mounted 1/6 Monster Truck Tires with Raid Wheels. These Badlands are based on the MX43 tire and features the same aggressive tread combination. Now mounted on the Raid wheels, these tire and wheels weigh 20% less than prior models. Pro-Line Badlands tires are known for having a sweet Motocross inspired tread and the Badlands MX57 tires kick that up a notch with a Bigger and Bolder knobby tread that matches modern MX tire design.The Raid 5.7" wheels use a 24mm hex with the standard 1/5 scale through hole to fit most 1/5 scale vehicles like the Arrma Kraton 8S and includes machined aluminum wheel washers to fit onto the Traxxas X-Maxx platform. Inspired by popular full-size off-road wheels, the Raid 5.7" wheel is extremely tough and lightweight. Features:
Tires:
Incredible Traction on Any Surface
Ultra-Durable and Anti-Ballooning Tire Compound
Aggressive Motocross-Inspired Appearance
Nearly 20% Lighter than the Previous Version
Foam Inserts Included
Made in the USA, since 1982
Wheels:
24mm Hex with Standard 1/5 Scale Through Hole to Fit Most Large-Scale Vehicles
Machined Aluminum Wheel Washers Included to Fit the X-MAXX® Platform
Extremely Tough with Bold Style to Match
Blacked-out Raid Wheel Styling
Specifications:
Scale: 1/6
Package Type:Pre-Mounted
Wheel Width:5.7"
Inner Diameter: 5.7"
Width: 3.72" (94 mm)
Height: 8.35" (212 mm)
Weight: 682 grams (1.5lbs)
Tire Compound:Medium
Vehicle Type:Monster Truck
Tire Type:All-Terrain
Tire Tread:Badlands MX57
Wheel Position:Front/Rear
Wheel Type:Raid
Wheel Hex Size: 24mm
Includes:
(2) Pre-Mounted Badlands MX57 All Terrain Tires
(2) Aluminum hub adapters
This product was added to our catalog on March 31, 2021
AXI05001T2, SCX6 Trail Honcho: 1/6 4WD RTR Sand
For those who want the biggest, baddest RC rock crawler ever, the legendary Axial® Honcho™ is now available on the 1/6 scale SCX6™ 4WD platform. With its 2-speed transmission and powerful Spektrum™ Smart electronics, this massive RTR is an absolute beast!
Based on the legendary Axial® Honcho™
New vehicle option on the SCX6™ platform
Increased performance due to body design
Two-speed metal gear transmission
Spektrum™ Smart 3-channel radio and electronics
AXI05000, 1/6 SCX6 Jeep JLU Wrangler 4WD Rock Crawler RTR
Overview
Fans of rock crawling, large-scale models, and Jeep® vehicles alike will be thrilled with the extreme detail and high-performance functionality of the SCX6™ Jeep® JLU Wrangler 4WD RTR. At 1/6 scale, it takes Axial® off-road adventuring to a new level.
In The Box
(1) Axial® SCX6™ Jeep® JLU Wrangler 1/6 Scale 4WD RTR
(1) Spektrum™ DX3™ Smart Transmitter with Thumb Steer
(1) Spektrum™ 5-Channel DSMR® Sport Receiver
(1) Spektrum™ 1/6 40kg Waterproof Digital Servo
(1) Spektrum™ 15kg Servo for 2-speed Shifting
(1) Spektrum™ Firma™ Crawler 120A Sensored Brushless Smart ESC
(1) Spektrum™ Firma™ 1200Kv Sensored Brushless Motor
(1) Servo Adapter for Large Scale Servos
Needed to Complete
(1) 2S-3S Standard or “Shorty” LiPo Battery
(1) Compatible Battery Charger
Features
The first ever Axial® 1/6 scale chassis design based on the proven SCX10™ III
Includes AR90 "Standard" axles with a heavy-duty spool
Metal gear transmission comes configured for two speeds with high and low gears
Durable three-link front and four-link rear suspension setup provides optimal handling
Replica V8 engine cover adds to the realistic appearance
Spektrum™ DX3™ 2.4GHz DSMR® radio provides superior range, response, and interference resistance and is compatible with Smart technology
Spektrum™ Firma™ Crawler 120A ESC feeds telemetry data to the DX3™ transmitter in real time
Includes a powerful Spektrum™ S905 Large Scale Metal Gear steering servo (also accepts larger 1/5 scale servos with the included adapter)
Detailed Jeep® JLU Wrangler body with LED headlights and taillights provides exceptional scale looks
High-traction, 7" tall BFGoodrich® KM3 tires are mounted on Black Rhino Primm 3-piece beadlock wheels
Battery trays adjust to fit a wide range of battery sizes
2-Year limited warranty (see product manual for details)
Axial Takes Scaling To A New Level
At 1/6 scale, the ready-to-run SCX6™ Jeep® JLU Wrangler 4WD brings a whole new dimension to RC crawling — and Axial® engineers have done it right. Whether you're a fan of full-size Jeep® vehicles, rock crawling, large-scale models, or all of the above, you'll be thrilled by the amount of realistic detail and high-performance functionality found here.
The SCX6™ Jeep® JLU Wrangler 4WD takes Axial® "scaling" to the next level. Based on the proven SCX10™ III, the SCX6™ chassis might be considered its big brother. It's engineered for extreme durability and performance with AR90 axles. For optimal handling, the chassis has a three-link Panhard front and four-link rear suspension setup. The transmission offers high and low gears out of the box, with a Spektrum™ S614 Metal-Gear Servo included and installed for the two-speed linkage.
While the 1/6 scale size allows more room for impressive detail, the SCX6™ Jeep® JLU Wrangler 4WD still fits conveniently into the trunk of your car — and most rock gardens and hiking trails provide plenty of exciting challenges to overcome. As you navigate the trails, you'll admire how well the Jeep® JLU Wrangler body reproduces its full-size counterpart. Even the most demanding Jeep® enthusiasts will appreciate the accuracy of the details molded throughout. When the sun goes down, LED headlights and taillights add even more realism.
Massive, 7" tall BFGoodrich® KM3 tires provide excellent grip and ground clearance for dirt, rocks, and all other off-road surfaces. They're mounted on licensed Black Rhino Primm injection-molded, 3-piece beadlock wheels so that the tires can be removed and replaced easily without gluing. Forest, desert, lake, mountains...the SCX6™ Jeep® JLU Wrangler 4WD is ready to go anywhere.
With the included Spektrum™ DX3™ radio, you'll enjoy the superior range, response, and interference resistance of exclusive DSMR® technology. Together with the installed Firma™ Crawler 120A Smart Sensored-Brushless ESC, it also comes ready to deliver the telemetry advantages of exclusive Spektrum™ Smart technology. Install a Spektrum™ Smart LiPo battery and you can view vehicle battery capacity on the transmitter's voltage level indicator. Outfit the DX3™ with the optional BT2000 Bluetooth module, download the free Spektrum™ Dashboard app to your smart device, and you're ready to use more Smart real-time telemetry — without needing on-board sensors or modules.
With its 1/6 scale size, popular Jeep® styling, and unstoppable Axial® engineering, the SCX6™ Jeep® JLU Wrangler 4WD takes RC scaling to an exciting new level. Just add your choice of suitable battery and take on the rocks!
Video Overview
SCX6™ CHASSIS
Based on the proven SCX10™ III layout, the 1/6 scale SCX6™ takes durability, functionality, and performance to the next level with features that include a steel chassis, 4-wheel drivetrain, multi-link suspension, AR90 axles, oil-filled shocks, and more.
TWO-SPEED METAL GEAR TRANSMISSION
Out of the box, the Axial® SCX6™ Jeep® JLU Wrangler 4WD RTR is configured for two speeds with high and low gears. A Spektrum™ S614 Metal-Gear Servo is included for the two-speed linkage.
3-LINK FRONT/4-LINK REAR SUSPENSION
For optimal handling, the SCX6™ suspension features a durable three-link front and four-link rear setup.
JEEP® JLU WRANGLER SCALE BODY
The Jeep® JLU Wrangler body mirrors its full-size counterpart, with many molded scale details throughout the interior and exterior that even the most demanding Jeep® enthusiasts will admire. LED headlights and taillights add to the realism after dark.
SCALE ENGINE DETAIL
A replica V8 engine covers and protects the included Spektrum™ Firma™ Smart ESC while adding to the model's realistic appearance.
SPEKTRUM™ DX3™ 2.4GHz DSMR® TRANSMITTER
The included Spektrum™ DX3™ radio features exclusive DSMR® technology for superior range, response, and interference resistance. It's also fully compatible with the Smart telemetry potential provided by the vehicle's installed Spektrum™ Firma™ 120A Smart ESC.
SPEKTRUM™ FIRMA™ CRAWLER 120A SENSORED BRUSHLESS SMART ESC
The factory-installed, waterproof Firma™ Crawler 120A Smart ESC delivers power and intelligence all-in-one — no additional vehicle modules or links required. This brushless ESC gives your SCX6™ Jeep® JLU Wrangler 4WD the ultimate drive while feeding important telemetry data straight to your DX3™ transmitter in real time.
SPEKTRUM™ S905 STEERING SERVO
Included and installed, the waterproof Spektrum™ S905 Large-Scale Metal-Gear Servo produces impressive torque (537.72 oz-in at 6V, 555.50 oz-in at 7V) for responsive, dependable steering control. The chassis will also accept larger 1/5 scale servos, if desired, with the included adapter.
BFGOODRICH® KM3 TIRES
Massive, 7" tall BFGoodrich® KM3 tires provide excellent grip and ground clearance for dirt, rocks, and all other off-road trails. They're mounted to licensed Black Rhino Primm injection-molded, 3-piece beadlock wheels so that tires can be removed and replaced easily without gluing.
MULTIPLE BATTERY MOUNTING LOCATIONS
Battery trays are included on both the right and left sides of the chassis. You can install a single battery or add a second on the opposite side (using a parallel Y-harness, SPMXCA509) to extend run time.
Product Specifications
Ball Bearings
Complete Vehicle
Battery
Sold Separately
Body
Polycarbonate
Charger
Sold Separately
Chassis
Stamped Steel
Completion Level
Ready-To-Run
Differential
Locked
Drivetrain
4WD
Drive Type
Forward/Brake/Reverse
Final Drive Ratio
85.02:1 / 25.1:1
Front Track
14.88 in (378 mm)
Power Type
Electric
Gear Pitch
1.0 MOD
Ground Clearance
4.25 in (107.9 mm)
Internal Gear Ratio
23.73:1 / 7.20:1
Motor Size
1/6 "5684"
Motor Type
Brushless - Sensored
Pinion
14T
Product Height
14.55" (370 mm)
Product Length
33.55" (852 mm)
Product Weight
25 lb (11.3 kg)
Product Width
14.88" (378 mm)
Radio
Included
Rear Track
14.88 in (378 mm)
Receiver
Included
Scale
1/6
Servos
Included
Shock Type
Oil-Filled/Coil-Over Spring
Speed Control
Included
Spur Gear
50T
Suspension
Multi-Link Solid Axle
Tire Compound
Soft
Tire Tread
BFGoodrich KM3
Vehicle Type
Rock Crawler
Wheelbase
19.74" (501 mm)
Wheel Width
2.05 in (52 mm)