ECP-1006, EcoPower "Electron 44 AC" LiHV/LiPo/LiFe Battery Charger (2-4S/4A/50W)
Simple, Versatile and LiHV Ready!
This is the EcoPower "Electron 44 AC" LiHV/LiPo/LiFeMulti-Chemistry AC Battery Charger. Every hobby enthusiast is unique, each with their own specific needs and expectations. Not everyone needs a professional grade, high performance battery charger, while others simply don’t want to spend big bucks on the latest “flavor of the month”. The common thread between these customers is they both want a reliable and affordable charger that can charge anything and at the same time provide consistent performance. EcoPower is ready to deliver with the Electron 44 AC!
The EcoPower "Electron 44 AC" is an electronically controlled single port balance charger that features a high performance microprocessor, combined with specialized operating software that allows you to reliably charge batteries of varying chemistry's and cell counts. Multiple charge modes, a 4S cell Lithium limit and an internal lithium cell balancer are only a few of the features that make this charger a powerful and flexible tool for any RC enthusiast. So stop beating yourself with cheap chargers, and buy from a trusted source that proves itself time after time with outstanding customer service and quality products at affordable prices!
Hi-Voltage Capable
This charger features a Hi-Voltage LiHV mode that allows you to safely charge Hi-Voltage LiHV capable batteries. You can adjust the charging end voltage of this mode up to 4.40V per cell, which is considerably higher than 4.20V per cell of an ordinary LiPo battery. Charging at this higher end voltage requires a Hi-Voltage LiHV capable battery, but the power gains are significant to the overall punch and power for the R/C model. But please note: battery voltages exceeding 4.20V per cell is prohibited from sanctioned racing rules, such as ROAR, IFMAR, etc.
Features:
Multi-Chemistry Versatility
50W Dedicated Power Supply
2S, 3S & 4S LiPo, LiFe and LiHV Compatibility
Selectable Amperage Charge Rate
Compatible with XH Balance Plug
LED Status Indication
Small & Lightweight
Ultra Portable Design
Specifications:
AC Input: 100-240 Volt 50/60Hz
Chemistry: LiPo/LiFe/LiHV
LiPo/LiIon/LiFe Cell Count: 2-4 Cells
Charger Current Range: 1A/2A/3A/4A (50W max)
Cell Terminate Voltage: LiPo: 4.2V; LiFe: 3.6V; LiHV: 4.35V
Current Drain for Balancing: 300mA
Net Weight: 220g
Dimensions: 69.4x110.7x40.5mm
Includes:
(1) Electron 44 AC Charger
(1) T-Style Charge Lead
(1) Instruction Sheet
WARNING NOTE: This charger is not recommended for use with Traxxas batteries with ID connectors or Spektrum Smart batteries with IC connectors. Charging batteries equipped with ID or IC connectors may require additional steps in order to safely balance charge your Lipo batteries. Please refer to your vehicle or aircraft owner’s manual for recommended batteries and charging equipment.
LiPo Battery & Charger Warnings:
DO NOT leave the battery in your model when charging
DO NOT leave unattended when charging
ALWAYS balance charge the battery
ALWAYS use a LiPo charging bag
YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCd only chargers WILL NOT WORK!)
YOU MUST not over discharge the Li-Poly battery pack
READ & UNDERSTAND the instructions carefully before operating this battery
This product was added to our catalog on November 21, 2021
ECP-115T, EcoPower WP115T Low Profile High Torque Waterproof Metal Gear Servo (High Voltage)
The EcoPower WP115T Low Profile High Torque Waterproof Metal Gear Servo, is an excellent option when you need an affordable, high voltage low profile servo. The EcoPower 115T servo has been designed for 1/10 2WD Buggies, 1/10 Drift Cars or as a Shift/Dig servo. The servo features smooth ball bearing control and a durable, metal gear drivetrain. Package includes one servo, one servo mount set, five molded servo horns and hardware.
Features:
Affordable option for 2WD applications or as a shift/dig servo
178 oz-in of torque @7..4V, and .08/60° sec transit speed
Waterproof
Digital circuitry
Cored DC motor
All metal gear drivetrain
Includes molded star, 4 way, dual, single and round arm type servo horns and mounting hardware
1 Year warranty against manufacturer defects*
*NOTE: Warranty does not cover stripped gears or damage caused by abuse.
Servo Model
115T Low Profile
Recommended Application
1/10 On-Road & Off-Road
Waterproof
Yes
Operating Voltage
4.8V - 7.4V
Operating Speed @ 4.8V
0.13/60° sec
Operating Speed @ 6.0V
0.10/60° sec
Operating Speed @ 7.4V
0.08/60° sec
Dynamic Torque @ 4.8V
108 oz-in (4.4 kg-cm)
Dynamic Torque @ 6.0V
127 oz-in (6.4 kg-cm)
Dynamic Torque @ 7.4V
178 oz-in (12.8 kg-cm)
Motor Type
Cored DC
Output Shaft
25 Tooth
Gears
Metal
Weight
44.5g
Dimensions
41.2x20.0x32.8mm (LxWxH)
NOTE: Be sure to set your End Point Adjustments when using this servo to ensure long life and performance.
Compatibility
Kyosho Fazer
Losi 22 1.0
Losi 22 2.0
Losi 22 3.0
Losi 22 3.0 SPEC-Racer
MST FXX 2.0 S
MST RMX 2.0 S
Tamiya TT-01
Tamiya TT-02
Team Associated DR10
Team Associated DR10M
Team Associated RC10 B4 Original
Team Associated RC10 B5 Original
Team Associated RC10 B5M
Team Associated RC10 B5M Factory Lite
Team Associated RC10B6 Original
Team Associated RC10B6.1
Team Associated RC10B6.1 Factory Lite
Team Associated RC10B6.1D
Team Associated RC10B6.2
Team Associated RC10B6.2D
Team Associated RC10B6.3
Team Associated RC10B6.3D
Team Associated RC10B6.4
Team Associated RC10B6.4D
Team Associated RC10B6D
Traxxas Bandit
Yokomo YD-2
This product was added to our catalog on January 3, 2023
WRP-HC-RED, Whitz Racing Products 30mm HyperCool Aluminum Cooling Fan (Red)
The Whitz Racing Products Silver 30mm HyperCool Aluminum Cooling Fan helps lower a motor's operating temperature. A cooler running temp improves the motor's power output, keeping speeds consistent on longer runs as well as extending the life of your motor. Included is a 200mm extension wire to run the length of your vehicle to connect the fan to your receiver no matter where the fan is positioned.
Secure the cooling fan with your favorite double-sided tape (servo tape), fan motor mount or any existing recommend options available for your intended vehicle.
Specifications:
Input Voltage: 6.5
RPM @8.5V: 28,000
Dimensions: 30x30x10mm
Weight: 19g
Color: Red
This item was added to our catalog on January 20, 2023
ECP-3013, EcoPower Sanding Sticks Set (8) (100/180/240/400/600/1000/1500/2000 Grit)
Sanding Stick Set Overview:The EcoPower Accessories Sanding Stick Set is an essential tool for modelers and hobbyists. This set includes various sanding sticks designed to help you achieve precise and smooth finishes on your projects. Whether you're working on scale models, woodworking, or other crafts, these sanding sticks offer versatility and precision. With different grit options, you can tackle a wide range of materials with ease.
Features:Precision Sanding: The set includes different grit sanding sticks for precise and controlled sanding.Versatility: Suitable for various materials including wood, plastic, and more.Comfortable Grip: Each stick features an ergonomic design for comfortable and prolonged use.Durable Construction: Made with high-quality materials to withstand rigorous sanding tasks.Includes:(8) Assorted Sanding Sticks (100, 180, 240, 400, 600, 1000, 1500 and 2000 Grit)
This product was added to our catalog on July 31, 2024
EcoPower One Piece Adapter Plugs are a great option for standard wire type adapters. These one piece adapters offer reduced resistance, can carry more current, and allow for a much cleaner installation than typical adapters.If you are using an adapter to connect a battery to your ESC or charger, this is a must have. Adapter features T-Plug to an XT60 style Female connections.
This product was added to our catalog on January 3, 2023
ECP-1504, EcoPower One Piece Adapter Plug (EC3 Male to XT60 Female)
EcoPower One Piece Adapter Plugs are a great option for standard wire type adapters. These one piece adapters offer reduced resistance, can carry more current, and allow for a much cleaner installation than typical adapters.
If you are using an adapter to connect a battery to your ESC or charger, this is a must have. Adapter features EC3 Male to XT60 Female connections.
This product was added to our catalog on December 16, 2021
ECP-827, EcoPower 827 12g Digital Metal Gear Micro Servo (High Voltage)
The EcoPower 827 12g Digital Metal Gear Micro Servo is an affordable, high voltage "mighty micro" upgrade. This servo is a great choice for the Dig/Shift servo in the Axial SCX10 III, as well as a Dig servo in the Axial Capra. The servo saver adapter is included! Plus, true high voltage compatibility means no more complicated wiring to protect your accessory servos when running a high voltage steering servo.
The 827 can also be used as a steering servo upgrade for the Axial SCX24 when combined with the optional Samix Mount (SAMSCX24-6068E-BK), or Hot Racing Servo Mount (HRASXTF24M01). The 827 holds 15% more torque than other optional SCX24 servo upgrades on the market and is the first to offer high voltage for under $15.
The EcoPower 827 fits a wide range of micro servo applications, including the Losi Mini-T 2.0 and Mini-B, Axial 1/18 Yeti Jr, a multitude of aircraft and many others. The servo features a durable metal gear train, digital circuitry for increased efficiency and reliability, servo saver adapter and servo horns.
Features:
High Voltage Micro Servo
Upgrade for SCX10 III Dig and Shift Servo (direct replacement for SX107 servo - SPMSSX107)
Upgrade for Capra Dig Servo
Upgrade for SCX24 Steering Servo (requires Hot Racing or Samix Servo Mount)
Includes Servo Saver Output Adapter for SCX10 III and Capra
Metal Gears
275mm Servo Lead
Specifications:
Operating Voltage: 6.0V to 8.4V
Operating Speed:
@6.0V: 0.12 sec/60
@8.4V: 0.10 sec/60
Torque:
@6.0V: 29.1oz-in (2.1kg-cm)
@8.4V: 37.5oz-in (2.7kg-cm)
Weight: 12g
Gears: Metal
Spline: 20T
Motor Type: Cored DC
Application: Small Scale Surface & Air
Includes:
EcoPower 827 Servo
Molded adaptor for Axial Servo Saver Horn w/12mm flat head screw
Molded servo horns w/M2.5 Mounting Screw
NOTE: Installation photo shows black servo horn which was achieved with Tamiya TS-6 Matte Black plastics paint (TAM85006); servo horn comes white.
This product was added to our catalog on December 16, 2021
ECP-5118, EcoPower "Basher" 3S 60C Hard Case LiPo Battery w/EC5 (11.1V/5000mAh)
This EcoPower 3S Hard Case LiPo Battery is your go-to option when it's time pull the trigger wide open, light up the tires and fling some dirt!
Sized for Arrma, Losi and more, this battery features a hard plastic exo-skin that protects the inner cells from the abuse of bashing. The case also features wire slots designed to allow the leads to sit flat, in the event you stack two batteries together for 6S use.
For Arrma vehicles that use the long inboard hook & look strap, you'll find the balance lead and ESC wires spaced apart to allow that strap to secure the batteries without damaging the wires.
Features:
Hard plastic case
Stackable design
60C discharge rate
5000mAh of capacity
EC5 connector (compatible with IC5)
Also available as a 4S (ECP-5119)
Specifications:
Type: Lithium Polymer
Capacity: 5000mAh
Voltage: 11.1V nominal
Connector Type: EC5 Ultra (12GA Wire)
Balancer Type: Align/E-Flite compatible (XH)
Number of Cells: 3
Weight: 365g
Dimensions (WxLxH): 47x139x37mm
Maximum Charge Rate: 2C (8.2A)
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell) Do not use the battery that has too low a voltage.
Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
This product was added to our catalog on December 16, 2021
FRF-FSPLUS, 4Fire International FireSense+ Handheld Fire Suppression System (13.5oz)
FireSense+ - RC Fire Suppression System
4Fire International FireSense+ Handheld Fire Suppression System. The 13.5oz canister is compact and efficient while remaining value-conscious. This versatile device is intended to handle A, B, F, and Electrical (up to 1000v) rated fires. Its compact design ensures it takes up minimal storage space, making it an ideal solution for constrained storage areas such as pit bags. While we cannot guarantee this will put out a fire, we can tell you it is better than peeing on it.
Product Warning: Due to the unpredictable nature of heat and fire, and also the individual using FireSense+, 4Fire International, SPA Technique, Caloosa Trains And Hobbies/Future Hobbies and its agents are NOT responsible or liable if a fire is not extinguished. Notwithstanding the previous statements, the total liability of any occurrence affiliated to a fire or fires, is limited to the value of the product contained within this can.
Fire Type Ratings:
A – Ordinary combustibles (wood, paper, fabrics & plastics etc.)
B – Flammable liquids (gasoline, grease, oil, paint, solvents etc.)
F – Cooking oils or fats (kitchenware etc.)
Non-conductive up to 1000v
This product was added to our catalog on February 21,2024
ECP-5119, EcoPower "Basher" 4S 100C Hard Case LiPo Battery w/EC5 (14.8V/5000mAh)
This EcoPower 4S Hard Case LiPo Battery is your go-to option when it's time pull the trigger wide open, light up the tires and fling some dirt!
Sized for Arrma, Losi and more, this battery features a hard plastic exo-skin that protects the inner cells from the abuse of bashing. The case also features wire slots designed to allow the leads to sit flat, in the event you stack two batteries together for 8S use.
For Arrma vehicles that use the long inboard hook & look strap, you'll find the balance lead and ESC wires spaced apart to allow that strap to secure the batteries without damaging the wires.
Features:
Hard plastic case
Stackable design
100C discharge rate
5000mAh of capacity
EC5 connector (compatible with IC5)
Also available as a 3S (ECP-5118)
Specifications:
Type: Lithium Polymer
Capacity: 5000mAh
Voltage: 14.8V nominal
Connector Type: EC5 Ultra (12GA Wire)
Balancer Type: Align/E-Flite compatible (XH)
Number of Cells: 4
Weight: 420g
Dimensions (WxLxH): 47x139x37mm
Maximum Charge Rate: 2C (8.2A)
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell) Do not use the battery that has too low a voltage.
Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
This product was added to our catalog on December 16, 2021
ECP-3101, EcoPower WP115T Metal Servo Gear Set
EcoPower WP115T Metal Servo Gear Set. This is the replacement gear set for the EcoPower WP115T servo. Package includes the gears, pins and bearing required to rebuild the gear train on one servo.
This product was added to our catalog on January 3, 2023
ECP-1509, EcoPower One Piece Adapter Plug (XT60 Male to EC3 Female)
EcoPower One Piece Adapter Plugs are a great option for standard wire type adapters. These one piece adapters offer reduced resistance, can carry more current, and allow for a much cleaner installation than typical adapters.If you are using an adapter to connect a battery to your ESC or charger, this is a must have. Adapter features an XT60 to EC3 style Female connections.
This product was added to our catalog on January 3, 2023
ECP-1004, EcoPower "Electron Li32 AC" LiPo Balance Battery Charger (2-3S/2A/25W)Simple Plug-and-Charge Operation!This is the EcoPower "Electron Li32 AC" LiPo specific AC Battery Charger. Every hobby enthusiast is unique, each with their own specific needs and expectations. Not everyone needs a professional grade, high performance battery charger, while others simply don’t want to spend big bucks on the latest “flavor of the month”. The common thread between these customers is they both want a reliable and affordable charger that can charge quickly and easily at the same time provide consistent performance. EcoPower is ready to deliver with the Electron Li32 AC!The EcoPower "Electron Li32 AC" is a simple to use LiPo specific balance charger that charges 2-3S LiPo batteries at a fixed 2 amps through the batteries XH balance plug. Simply connect your batteries' XH balance plug to the appropriate 2S or 3S port on the charger, and the Electron Li32 AC will detect the voltage and automatically start the charge process.Stop beating yourself with cheap chargers, and buy from a trusted source that proves itself time after time with outstanding customer service and quality products at affordable prices! Features:
Specific for LiPo Battery Chemistry Only
25W LiPo Balance Charger
Simple Plug-and-Charge Operation
2S 7.4V and 3S 11.1V Compatibility
Compatible with XH Balance Plug
LED Status Indication
Small & Lightweight
Ultra Portable Design
No Buttons to Learn
No Programming Needed
Specifications:AC Input: 100-240 Volt 50/60HzBattery Chemistry: LiPo (Lithium Polymer) onlyCharger Current Range: 2.0A (25W max)Current Drain for Balancing Port: 300mA/cellLiPo Cell Count: 2-3 CellsNet Weight: 150gDimensions: 110x65x38mmIncludes:
(1) Electron Li32 AC Charger
(1) Instruction Sheet
WARNING NOTE: This charger is not recommended for use with Traxxas batteries with ID connectors or Spektrum Smart batteries with IC connectors. Charging batteries equipped with ID or IC connectors may require additional steps in order to safely balance charge your Lipo batteries. Please refer to your vehicle or aircraft owner’s manual for recommended batteries and charging equipment.
LiPo Battery & Charger Warnings:1) DO NOT leave the battery in your model when charging2) DO NOT leave unattended when charging3) ALWAYS balance charge the battery4) ALWAYS use a LiPo charging bag5) YOU MUST use a Li-Poly specific charger to charge the pack (NiMH or NiCd only chargers WILL NOT WORK!)6) YOU MUST not over discharge the Li-Poly battery pack7) READ & UNDERSTAND the instructions carefully before operating this batteryThis product was added to our catalog on December 16, 2021
