Traxxas Bandit XL-5

12 products


  • TRA3736, Traxxas Steering Blocks (2) (VXL) TRA3736, Traxxas Steering Blocks (2) (VXL)

    Traxxas TRA3736, Traxxas Steering Blocks (2) (VXL)

    22 in stock

    TRA3736, Traxxas Steering Blocks (2) (VXL) This is a set of two replacement steering blocks from Traxxas. These steering blocks mount the the front uprights, and support the front axles. This product was added to our catalog on May 29, 2021

    22 in stock

    $3.85

  • TRA3752, Traxxas Stub Axle Carriers (2) (VXL) TRA3752, Traxxas Stub Axle Carriers (2) (VXL)

    Traxxas TRA3752, Traxxas Stub Axle Carriers (2) (VXL)

    6 in stock

    TRA3752, Traxxas Stub Axle Carriers (2) (VXL) (requires 5x11x4mm bearings) Replacement part for these models: Bandit® VXL BIGFOOT® No. 1 Officially Licensed Replica Drag Slash Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede® Accessory part for these models: Bandit® This product was added to our catalog on September 7, 2021

    6 in stock

    $3.00

  • TRA2444, Traxxas 47mm Front Camber Link Turnbuckle Set (2) TRA2444, Traxxas 47mm Front Camber Link Turnbuckle Set (2)

    Traxxas TRA2444, Traxxas 47mm Front Camber Link Turnbuckle Set (2)

    4 in stock

    TRA2444, Traxxas 47mm Front Camber Link Turnbuckle Set (2) Replacement part for these models: Bandit® VXL Drag Slash Accessory part for these models: Bandit® This product was added to our catalog on September 7, 2021

    4 in stock

    $8.00

  • TRA2753X, Traxxas Rear Stub Axles (2) TRA2753X, Traxxas Rear Stub Axles (2)

    Traxxas TRA2753X, Traxxas Rear Stub Axles (2)

    13 in stock

    TRA2753X, Traxxas Rear Stub Axles (2) Replacement part for these models: Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Sport Traxxas Nitro Stampede Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd This product was added to our catalog on May 7, 2021

    13 in stock

    $5.00

  • TRA2445, Traxxas 55mm Toe Link Turnbuckle Set (2) TRA2445, Traxxas 55mm Toe Link Turnbuckle Set (2)

    Traxxas TRA2445, Traxxas 55mm Toe Link Turnbuckle Set (2)

    4 in stock

    TRA2445, Traxxas 55mm Toe Link Turnbuckle Set (2) Replacement part for these models: Bandit VXL Drag Slash Accessory part for these models: Bandit This product was added to our catalog on September 7, 2021

    4 in stock

    $8.99

  • TRA2470A, Tires & Wheels, Assembled, Traxxas Bandit TRA2470A, Tires & Wheels, Assembled, Traxxas Bandit

    Traxxas TRA2470A, Tires & Wheels, Assembled, Traxxas Bandit

    10 in stock

    2470A - Tires & wheels, assembled (Tracer 2.2' black chrome wheels, Alias 2.2' tires) (2) (Bandit rear, medium compound with foam inserts) (TSM rated) TRA2470A, T&W BLK CHRM 2.2/ALIAS FR TIRE Alias® 2.2" medium compound tires come assembled with foam inserts on Tracer 2.2" wheels. Available in mirror chrome and black chrome finish. Replacement part for these models: Bandit® VXL This product was added to our catalog on September 7, 2021

    10 in stock

    $26.00

  • RPM80375, Front Bearing Carrier, Blue: TRA 2WD RPM80375, Front Bearing Carrier, Blue: TRA 2WD

    RPM RPM80375, Front Bearing Carrier, Blue: TRA 2WD

    9 in stock

    RPM80375, Front Bearing Carrier, Blue: TRA 2WD Product Details Key Features Fits the 2WD Slash, Nitro Slash, Electric Rustler and Electric Stampede Replaces stock Traxxas #3736 5x11x4mm size bearings not included Available in Black and Blue Overview Traxxas Bandit Traxxas Nitro Slash Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd RPM oversized bearing carriers are the perfect solution for worn bushings and weak 5 x 8mm. bearings! Give your electric the same performance the nitro trucks come stock with. 5 x 11mm. bearings have higher load ratings than a 5 x 8mm. bearing and will significantly increase the time between maintenance periods. In addition, our bearing carriers are so strong; we guarantee that they won't ever break! Molded in black. When used in conjunction with our #80382 Rear Bearing Carriers, you'll never have to worry about worn-out bushings or blown wheel bearings again! Tech Notes: 5x11x4mm. bearings are not included with these kits (4 bearings are needed for each kit). Product Specifications Material Plastic Refinement Color Blue This product was added to our catalog on December 16, 2021

    9 in stock

    $8.95

  • 24054-8, Traxxas Bandit 1/10 RTR 2WD Electric Buggy w/XL-5 ESC 24054-8, Traxxas Bandit 1/10 RTR 2WD Electric Buggy w/XL-5 ESC

    Traxxas 24054-8, Traxxas Bandit 1/10 RTR 2WD Electric Buggy w/XL-5 ESC

    2 in stock

    24054-8, Traxxas Bandit 1/10 RTR 2WD Electric Buggy w/XL-5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger The Traxxas Bandit was originally released back in 1995 and quickly became a staple of RC performance. This version of the Traxxas bandit features many updates and advancements to give you iconic looks with modern performance. Capable of speeds over 35mph (with included optional gearing). The included battery and charger get you quickly out into the roost throwing action. Traxxas equipped this buggy with the potent 12-turn Titan brushed motor and powerful XL-5 ESC. The XL-5 gives drivers 3 different driving modes that give you the ability to learn, race and bash with confidence. The included 3000mAh battery delivers good runtime while the included USB-C charger gets you back into the action with ease. This Bandit also includes the Traxxas TQ 2.4GHz Radio System to give drivers an excellent range to drive their buggy. The Bandit includes a pre-painted ProGraphix body shell that gives users that off-road buggy feel. The decals on the body are pre-applied to depict windows, cage, net, and more! Get out and enjoy the outdoors with the Traxxas Bandit, the legendary off-road Traxxas Buggy! CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately). Features: Tough Traxxas 2WD 272 Magnum Transmission High Torque Traxxas 2056 Steering Servo Waterproof ESC for All Weather Bashing Includes Pre-Painted Bodyshell Easy Access Battery Compartment Includes Battery and Charger for Easy of Use Delivers a Top Speed of Over 35MPH (with 7-cell NiMH battery and included 31-tooth pinion gear) Three Driving Profiles Specifications: Scale: 1/10 Length: 16.7in (423mm) Width: 9.84in (250mm) Height: 7.01" (178mm) Wheelbase: 11.25in (286mm) Weight: 47.9oz (1.36kg) Power Source: Electric Input Voltage: 6-cells (7.2V) NiMH 2S (7.4V) LiPo Drive: RWD Gear Pitch: 48P Gear Ratio: 2.72 (final drive: 10.17) Assembly Level: Ready-To-Run Includes (1) Traxxas RTR Bandit (1) 3000mAh Battery with Traxxas ID Connector (1) USB-C Battery Charger (1) User Manual Needed To Complete (4) AA Batteries for Transmitter This product was added to our catalog on October 21, 2023

    2 in stock

    $229.99

  • TRA2432, Traxxas 30° Caster Block Set TRA2432, Traxxas 30° Caster Block Set

    Traxxas TRA2432, Traxxas 30° Caster Block Set

    13 in stock

    TRA2432, Traxxas 30° Caster Block Set This is a replacement Traxxas 30° Caster Block Set, and is intended for use with the Traxxas Bandit. This product was added to our catalog on September 7, 2021

    13 in stock

    $4.00

  • RPM73752, Front Bulkhead, Black: Fits Traxxas 2-Wheel drive 1/10 vehicles

    RPM RPM73752, Front Bulkhead, Black: Fits Traxxas 2-Wheel drive 1/10 vehicles

    5 in stock

    RPM73752, Front Bulkhead, Black: TRA 2WD Product Details Key Features Fits Traxxas 2-Wheel drive 1/10 vehicles Made from RPM's trademarked blend of incredibly strong nylons RPM's industry-leading limited lifetime breakage warranty Available in different colors COMPATIBILITY Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Sport Traxxas Nitro Stampede Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd Overview One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: Fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including its variants, the Skully and Craniac). It does not fit the 4x4 versions of any of these vehicles. * Weight comparison is based off of the stock bulkhead versus the RPM Front Bulkhead without the dust plate installed. Product Specifications Material Nylon Scale 1/10

    5 in stock

    $11.95

  • TRA2414, Traxxas Wing Wire TRA2414, Traxxas Wing Wire

    Traxxas TRA2414, Traxxas Wing Wire

    6 in stock

    TRA2414, Traxxas Wing Wire This product was added to our catalog on September 7, 2021

    6 in stock

    $2.00

  • EXO1985, Exotek Traxxas Slash/Bandit "Vader" Drag Race Chassis Conversion EXO1985, Exotek Traxxas Slash/Bandit "Vader" Drag Race Chassis Conversion

    Exotek EXO1985, Exotek Traxxas Slash/Bandit "Vader" Drag Race Chassis Conversion

    1 in stock

    EXO1985, Exotek Traxxas Slash/Bandit "Vader" Drag Race Chassis Conversion TX Vader Drag Chassis Conversion, for the 2wd Slash / Bandit TX VADER drag chassis conversion set. Lightweight 'street eliminator' drag chassis conversion set for use with TRAXXAS 2WD SLASH OR BANDITS KITS. Converts your Slash to be cash race ready for the hot 'Street Eliminator No Prep' race classes springing up around the US. Provides the legal 13" wheelbase to fit under the hottest new no prep bodies that are on the market. Based on the excellent handling and proven 22 VADER design. This pro chassis conversion set features - Carbon fiber made and machined in USA - Heavy duty 2.5mm thick chassis and side rail plates - Centralized servo mounting for improved balance - Alloy servo mounting block that ties into the side rails for extra rigid and tweak free front chassis setup - Modular chassis design- allows standard rear motor or optional mid motor gear box placement (see instructions for build notes) - 6 heavy duty alloy side rail posts - Pro AE B6 style full ball bearing supported steering rack and crank set - Includes 25 spline clamping alloy servo horn (25 spline servo required like the Traxxas servo etc.) - Alloy parts are finished in glossy black with blue chamfers for that factory racing look - Carbon fiber top bulkhead plate - Multi position shorty lipo mounting to adjust for wheelie/ no wheelie balance - 2 level chassis design allows you to lower or raise the center of gravity for stability yet keeps the gear box higher to increase traction and keep the drive axles straighter for higher speeds - The 2 layer rear chassis also raises the rear roll center which increases the forward launch traction while reducing side to side roll for improved high speed stability. - Offers multiple weight balance options to maximize grip on the street or on the track - Includes steel hex hardware (requires high quality metric hex tools, 2.0 & 2.5mm) - Includes a lipo hold set - Includes large Exotek logo stickers - Includes instruction sheet Other option parts shown not included. Wheelie bar shown is not included. Requires assembly. Shown assembled for display purposes only Also required: Traxxas 2wd SLASH or BANDIT kit Traxxas body mount set TRA1914R Traxxas toe link set TRA3745 or TRA3139A (2 sets needed) This product was added to our catalog on December 16, 2021

    1 in stock

    $225.95

Recently Viewed

© 2024 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account