Sign up for our newsletter
Subscribe to our emails
HRC35055S, Hitec HS-5055MG Digital Metal Gear Sub Micro Servo This is a Hitec HS-5055MG Digital Metal Gear Sub Micro Servo. Since its introduction, the HS-55 has set the standard for affordable performance, offering precision components that have been engineered to provide long lasting trouble free service! Enter the new HS-5055MG digital, metal geared version...with this new servo Hitec takes ultra micro performance to the next level without breaking the bank. The new HS-5055MG is a perfect choice for ”smaller” high performance electric helicopters, aircraft and sailplanes, as well as micro surface applications. Specifications: Speed: 4.8V: 0.2 sec/60 deg. 6.0V: 0.17 sec/60 deg. Torque: 4.8V: 18.05 oz/in 6.0V: 22.2 oz/in Length: 0.9in (22.8mm) Width: 0.46in (11.6mm) Height: 0.94in (24mm) Weight: 0.34oz (9.5g) Limited Warranty: Hitec Servo Warranty: Each Hitec servo is backed by a limited two-year warranty from the date of purchase. Hitec RCD USA, INC. shall REPAIR OR REPLACE, at Hitec RCD, INC., defective equipment covered by this warranty, otherwise the purchaser and/or consumer is responsible for any charges for the repair or replacement of the product. This product was added to our catalog on December 16, 2021
$26.99
HRC44178, Hitec Universal Balancing Adapter This product was added to our catalog on December 16, 2021
$16.99
HRC44295, Hitec RDX1 Mini AC Charger (6S/6A/65W) The Hitec RDX1 Mini AC Charger is a sleekly-designed, compact AC charger that packs 65 watts of power into a charger that is a fraction of the size of other models. Designed to meet a wide variety of battery management requirements, this charger is compatible with a full range of the most popular battery types, including the LiHV. With six amps of maximum charging current and 2 amps of discharging current, the RDX1 Mini is a dependable way to stay charged with Hitec. Features: User-Friendly LCD Interface Stores 10 Different Battery Memory Charge/Discharge Profiles Terminal Voltage Control Built-in Balance Connector (JST, XT) Cell Balancing While Discharging Balance, Standard, Fast and Storage Modes for All Lithium Battery Chemistries Re-Peak Charge Mode and Delta-Peak Sensitivity for NiMH/NiCd Batteries Optional Temperature Sensor for NiCd/NiMH Charging Built-in XT60 Connector Smart Ventilation Fan Specifications: AC Input: 100-240 Volts AC Charge Power: 65 Watts Charge Current Range: 0.1 – 6.0 Amps Discharge Power: 10 Watts Discharge Current Range: 0.1 – 2.0 Amps Current Drain for LiPo Balancing: 200mA per Cell NiCd/NiMH Battery Cell Count: 6 - 8 Cells LiPo/LiHV/LiFe/Lilon Cell Count: 2 - 4 Cells Pb Battery Voltage: 6 - 12 Volts Dimensions: 4.61 x 4.17 x 2.17 in. (117 x 106 x 55mm) Weight: .69 lbs. (315g) This product was added to our catalog on December 16, 2021
$46.99
HRC31422S, Hitec HS-422 Deluxe ServoThis product was added to our catalog on December 16, 2021
$23.99
HRC57215S, Hitec Standard Receiver Switch Harness with Charging ConnectorThis product was added to our catalog on December 16, 2021
$15.99
HRC32625S, Hitec HS-625MG Metal Gear Super Torque ServoThis product was added to our catalog on December 16, 2021
$54.95
HRC32645S, Hitec HS-645MG High Torque Metal Gear Servo S/JR/ZThis product was added to our catalog on December 16, 2021
$54.95
HRC55702, Hitec Machined Aluminum Double Sided Servo Horn (Red)This product was added to our catalog on December 16, 2021
$11.97
HRC56211, Hitec Red BEC Connector and Lead (Male)This product was added to our catalog on December 16, 2021
$2.97
HRC56210, Hitec Red BEC Connector and Lead (Female)This product was added to our catalog on December 16, 2021
$2.97
HRC55701, Hitec Machined Aluminum Single Sided Servo Horn (Blue)This product was added to our catalog on December 16, 2021
$8.95
HRC55315, Hitec HS-65 Metal Gear SetThis product was added to our catalog on December 16, 2021
$17.97
HRC32065S, Hitec HS-65MG Mighty Feather ServoThis product was added to our catalog on December 16, 2021
$49.55
HRC33065S, Hitec HS-65HB Karbonite Micro Servo This is the HS-65HB Karbonite Micro Servo from Hitec. Considered one of the most powerful servos in the micro class, the HS-65 is offered with a choice of “shock resistant” Metal or “zero wear” Karbonite gears. The 65 series features a top-ball bearing for long life and positive centering, 31 ounces/inches of power at 6 volts and is an excellent choice for higher performance micro helicopters, electric park flyers, and 1/18 scale cars. This version of the servo has a universal connector which will fit Airtronics, JR, Hitec and Futaba receivers (be careful with the polarity of the connector for Futaba radios). As most servo gears wear, they develop lash and slop. Loose gears mean less control of your model. As a Hitec exclusive, Karbonite gears have eliminated gear lash and slop forever. Karbonite gears are four times stronger than conventional white resin gears, and they are less likely to strip under the shock and loads that would usually break standard gears. We tested Karbonite gears with 250,000 cycles under load and they showed no sign of wear. The result, greater reliability and control with Hitec's Karbonite gear technology. Specifications: Speed: 4.8V: 0.14 sec/60 deg. 6.0V: 0.11 sec/60 deg. Torque: 4.8V: 24.99 oz/in 6.0V: 30.55 oz/in Length: 0.93in (23.6mm) Width: 0.46in (11.6mm) Height: 0.94in (24mm) Weight: 0.39oz (11.1g) This product was added to our catalog on December 16, 2021
$29.99
HRC55001, Hitec HS-55 Servo Gear SetThis product was added to our catalog on December 16, 2021
$4.49
HRC55013, Hitec HS-65HB Karbonite Gear SetThis product was added to our catalog on December 16, 2021
$6.99
HRC31055S, Hitec HS-55 Sub Micro Servo Hitec HS-55 Sub Micro Analog Servo. Small in size, this servo is best at home in small electric park flyers. This version of the servo has a universal connector which will fit Airtronics, JR, Hitec and Futaba receivers (be careful with the polarity of the connector for Futaba radios). Specifications: Speed: 4.8V: .17 sec/60 degrees 6.0V: .14 Sec/60 Degrees Torque: 4.8V: 15.27 oz-in 6.0V: 18.05 oz-in Weight: 0.28 oz Length: .89" (22.8mm) Width: 0.45" (11.6mm) Height: 0.94" (24mm) This product was added to our catalog on December 16, 2021
$19.99
HRC56355, Hitec HS-50 Servo Gear SetThis product was added to our catalog on December 16, 2021
$4.49
HRC55707, Hitec Half Metal Servo Horn: HS5125MGThis product was added to our catalog on December 16, 2021
$7.97
HRC55718, Hitec HS-65 Horn And Hardware SetThis product was added to our catalog on December 16, 2021
$2.97
HRC35245S, Hitec HS-5245MG Digital Metal Gear Mighty Mini ServoThis product was added to our catalog on December 16, 2021
$67.95
HRC31081S, Hitec HS-81 Micro ServoThis product was added to our catalog on December 16, 2021
$24.95
HRC31085S, Hitec HS-85BB Mighty Micro Ball Bearing ServoThis product was added to our catalog on December 16, 2021
$34.95
HRC32085S, Hitec HS-85MG Mighty Micro Metal Gear Ball Bearing ServoThis product was added to our catalog on December 16, 2021
$51.55
HRC32225S, Hitec HS-225MG Mighty Mini Metal Gear Ball Bearing ServoThis product was added to our catalog on December 16, 2021
$41.55
HRC31225S, Hitec HS-225BB Mighty Mini Ball Bearing Servo (S/JR/Z)This product was added to our catalog on December 16, 2021
$30.95
HRC31311S, Hitec HS-311 Economical Standard ServoThis product was added to our catalog on December 16, 2021
$19.98
HRC33045S, Hitec HS-45HB Premium Feather ServoThis product was added to our catalog on December 16, 2021
$27.95
HRC56386, Hitec Servo Gear Set: HS-81MG, HS-82MGThis product was added to our catalog on December 16, 2021
$17.99
HRC55710, Hitec Standard Heavy Duty Servo ArmsThis product was added to our catalog on December 16, 2021
$4.47
HRC55709, Hitec Large Heavy Duty Servo ArmsThis product was added to our catalog on December 16, 2021
$4.95
HRC55301, Hitec Replacement Servo Gear Set (HS-5125/125MG)This product was added to our catalog on December 16, 2021
$31.89
HRC32755S, Hitec HS-755MG Giant Scale Metal Gear ServoThis product was added to our catalog on December 16, 2021
$79.95
HRC55302, Hitec Servo Gear Set: HS615SMG/625MG/5625MGThis product was added to our catalog on December 16, 2021
$17.99
HRC33322S, Hitec HS-322HD Standard Heavy Duty ServoThis product was added to our catalog on December 16, 2021
$23.75
HRC55303, Hitec Replacement Servo Gear Set (HS-645MG/5645MG)This product was added to our catalog on December 16, 2021
$17.99
HRC33755S, Hitec HS-755HB Giant Scale ServoThis product was added to our catalog on December 16, 2021
$52.95
HRC55801, Hitec Replacement Screw Set, Resin Gear Horn (81,700Bb)This product was added to our catalog on December 16, 2021
$1.29
HRC35625S, Hitec HS-5625MG Hi-Speed Metal Gear ServoThis product was added to our catalog on December 16, 2021
$69.95
HRC55802, Hitec Replacement Screw Set, Metal Gear Horn (81,525)This product was added to our catalog on December 16, 2021
$1.29
HRC35645S, Hitec HS-5645MG Digital Hi Torque Metal Gear ServoThis product was added to our catalog on December 16, 2021
$69.95
HRC56336, Hitec Replacement Servo Hardware Set (422,425,715)This product was added to our catalog on December 16, 2021
$2.47
HRC55006, Hitec Replacement Karbonite Servo Gear Set (HS-635)This product was added to our catalog on December 16, 2021
$7.49
HRC55008, Hitec Replacement Karbonite Servo Gear Set (HS-755)This product was added to our catalog on December 16, 2021
$9.97
HRC55014, Hitec Replacement Metal/Karbonite 1st Gear Set (3) (5955/5995/5996/5997)This product was added to our catalog on December 16, 2021
$11.95
HRC31425S, Hitec HS-425BB Pro Ball Bearing ServoThis product was added to our catalog on December 16, 2021
$25.55
HRC55003, Hitec Replacement Servo Gear Set (HS-322HD/325HB)This product was added to our catalog on December 16, 2021
$6.49
HRC31077S, Hitec HS-77BB Servo Low Profile BB UniversalThis product was added to our catalog on December 16, 2021
$43.95
Subscribe to our emails