JCO3152101021, JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires (White) (2) (Pink) w/12mm Hex
JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires are designed with radius positioning to enhance the drive on carpet and turf surfaces. The pre-mounted JConcepts tires include open cell, medium inserts for plush control mounted on JCO3348 Mono wheels available in bright white and fluorescent yellow.
The Fuzz Bite lands on a low-profile carcass carried over from tires such as the Twin Pin. The low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also forward mid-corner launch grip.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
Pre-mounted
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra-light weight scalloped tire beads
Plush open cell inserts included
Mounted on authentic JCO3348 wheels
This product was added to our catalog on May 27, 2022
JCO3165-101011, JConcepts Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Tires (White) (2) (Pink) (Carpet) w/12mm Hex
JConcepts Fuzz Bite LP 2.2" Pre-Mounted 2WD Front Buggy Carpet Tires were developed to enhance the drive on carpet and turf surfaces. The pre-mounted JConcepts tires are assembled with no inserts, mounted on JCO3376 Mono wheels available in bright white or fluorescent yellow.
The Fuzz Bite front tire lands on a super low-profile carcass. The super low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse "water tower" shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated to create a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, increased steering response and the tightness of the package creates a nimble racing vehicle. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also additional mid-corner steering.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on a wheel which lead to a great alignment but now with reduced unsprung weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
Pre-mounted
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra-light weight scalloped tire beads
Mounted on authentic JCO3376 wheels
This product was added to our catalog on June 20, 2022
JCO3154-3045, JConcepts Animal Pre-Mounted SC Tires (Tremor) (2) (Slash Rear) (Yellow)
JCO31543045
This product was added to our catalog on December 16, 2021
JCO3190-101021, JConcepts Twin Pins 2.2" Pre-Mounted Rear Buggy Carpet Tires (White) (2) (Pink) w/12mm Hex
The JConcepts Twin Pins Carpet 2.2" Pre-Mounted Rear Buggy Tires deliver a ground-breaking design that has the competition scratching their heads. The Twin Pins feature a dual spike which is connected together to form a mini-mountain like silhouette. The Twins are rotated throughout the design to form a solid, pin rich environment so surface area is maximized. The tire carcass itself has been refined, slammed to low-profile, pre-mounted on JCO3348W or JCO3348Y wheels refined for high-speed standards and slimmed out to reduce weight in all possible areas.
The center section of the tire is connected at the base by an ultra-low, winding “river walk” which strengthens pins near the base. The “river walk” can also extend the longevity of the tire once the pins are gone, the “walk” retains some height for emergency long distance main events. The outside of a tire can make or break side-bite, too much pin and the tire can be somewhat tippy, while not enough yields a squirrely vehicle. The very outside of the Twin Pins have legs which extend out to micro pins giving the racer all-important support turning high-speed corners.
Features:
Pre-Mounted JConcepts fit, finish and design
Dual, connected pin with alternating positioning
“River walk” of center pin support
Sidewall legs with micro pins
Carefully shaped profiled carcass for rolling speed
Includes open cell inserts
This product was added to our catalog on March 14, 2021
JCO3400C, 2.2 x 3.0" 12mm hex rear wheel - (chrome)
JCO3400C, JConcepts Tactic Street Eliminator Rear Drag Racing Wheels (2) (Chrome)
JConcepts Tactic Street Eliminator Rear Drag Racing Wheels (2) (Chrome) w/12mm Hex
These JConcepts Tactic Street Eliminator Rear Drag Racing Wheels with 12mm Hex are here and ready for action with street racers everywhere. These chrome tactic wheels are a a great upgrade for the Team Associated DR10 Drag Race Car.The heavy spoke design and 1:1 influence imposes their will on the competition. These rear wheel features a beefy, SCT 2.2” x 3.0” size and fit any SCT tire already produced, as well as a vast number of vehicles for anyone looking to undertake a Street Eliminator project and accept a 12mm hex drive. Popular vehicles which use the Tactic wheels include the Traxxas Slash, Bandit, Rustler as well as the popular line-up of Team Associated short course trucks and now, the purpose built DR10.The chrome look gives the wheels serious street appearance and look ultra-low under any race car. The Tactic wheels match perfectly with JConcepts Hotties tires (JCO3193 front) and (JCO3194 rear) for the Street Eliminator look. Non-marring 4mm wheel locknuts have been included for a cleaner installation and less damaging installation. (Serrated locknuts are not recommended in this application.)Features:
Original 1:1 inspired chrome Tactic 12mm hex design
Durable design and material
Hassle free and lightweight 1-piece design
Eye-catching style
DragRace Concepts Slash Drag PakTeam Associated DR10Traxxas Slash 2wd
This product was added to our catalog on December 16, 2021
JCO3190-201021, JConcepts Twin Pins 2.2" Pre-Mounted Rear Buggy Carpet Tires (Yellow) (2) (Pink) w/12mm Hex
The JConcepts Twin Pins Carpet 2.2" Pre-Mounted Rear Buggy Tires deliver a ground-breaking design that has the competition scratching their heads. The Twin Pins feature a dual spike which is connected together to form a mini-mountain like silhouette. The Twins are rotated throughout the design to form a solid, pin rich environment so surface area is maximized. The tire carcass itself has been refined, slammed to low-profile, pre-mounted on JCO3348W or JCO3348Y wheels refined for high-speed standards and slimmed out to reduce weight in all possible areas.
The center section of the tire is connected at the base by an ultra-low, winding “river walk” which strengthens pins near the base. The “river walk” can also extend the longevity of the tire once the pins are gone, the “walk” retains some height for emergency long distance main events. The outside of a tire can make or break side-bite, too much pin and the tire can be somewhat tippy, while not enough yields a squirrely vehicle. The very outside of the Twin Pins have legs which extend out to micro pins giving the racer all-important support turning high-speed corners.
Features:
Pre-Mounted JConcepts fit, finish and design
Dual, connected pin with alternating positioning
“River walk” of center pin support
Sidewall legs with micro pins
Carefully shaped profiled carcass for rolling speed
Includes open cell inserts
This product was added to our catalog on March 14, 2021
JCO3165-010, JConcepts Fuzz Bite LP Carpet 2.2" 2WD Front Buggy Tires (2) (Pink)
The JConcepts Fuzz Bite LP Carpet 2.2" 2WD Front Buggy Tire is a pin tire option for carpet and turf racing, designed with radius positioning to enhance the drive on a range of surfaces.
The Fuzz Bite lands on a low-profile carcass. The low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also forward mid-corner launch grip.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra-light weight scalloped tire beads
This product was added to our catalog on April 14, 2021
JCO3181-101011, JConcepts Pin Swag 2.2" Pre-Mounted 2WD Front Buggy Carpet Tires (White) (2) (Pink) w/12mm Hex
These are the JConcepts Pin Swag 2.2" Pre-Mounted 2WD Front Buggy Carpet Tires. The JConcepts Pin Swag 2.2" 2wd slim front tires are designed to combine the outer lugs of the JConcepts Swagger front tire with a dense arrangement of pins. The Swag is split down the center to give a little individual control to contort to surfaces. In between, a stagger section with an angular front is placed just behind a vertical rib to complete the design. The tight spacing of the Pin and Swag bite together and minimize wear across the carcass.
Features:
JConcepts original design, details, and materials
Pre-mounted for convenience
Low profile carcass layout
Pin and Swag combo pin/lug arrangement
Hefty base pin with crisp ends
Dense layout to help minimize wear.
Ultra-light weight scalloped tire beads.
Available in bright white or fluorescent yellow colors
This product was added to our catalog on June 20, 2022
JCO3102-201091, JConcepts Mini-T 2.0 Sprinter Pre-Mounted Rear Tires (Yellow) (2) (Pink)
JConcepts Mini-T 2.0 Sprinter Pre-Mounted Rear Tires have square, angled pins that are stacked vertically to flex and fold evenly across the tire. Typically, a stacked tread will wear less and provide more forward bite while the aligned space helps rotation in the turns and gives a snappy release to square up quickly. Starting with the tread, the team focused on durability and performance to bring a rear tire option to market that competes on loose surfaces which are wet or dusty. The Sprinter tires are great for a variety of conditions and have provided grip and traction for stadium trucks for decades.
The outer sidewall of the tire has angled pins incorporated into the design to help release the turn and provide the rotation not only needed in dirt off-road but specifically in dirt-oval racing. The blended tread to tire body is supported with a generous radius which promotes “pin snap” and resists tearing or separation. Horizontal traction bars connect several pins near the center of the tire which bonds a critical area for increased push at high-speed. The sidewall area blends nicely into a step-spike feature which helps smooth the transition in bumpy sections and create side-bite.
Features:
JConcepts original tread, available in multiple compounds
Square, angled pins with horizontal traction bars
Angled outer sidewall pins for turn release
Mini-T 2.0 bead mounting size
Carefully shaped carcass = smooth driving characteristics
Includes firm foam inserts
Off-Road and Dirt-Oval racing ready
This product was added to our catalog on December 16, 2021
The JConcepts Mini-B/Mini-T 2.0 Ellipse Pre-Mounted Rear Tires were designed to compete on smooth high-grip indoor and outdoor surfaces. The center section of the tire is a “home plate” styled footprint to provide massive surface area for better contact and increased longevity. The web of extensions is unique and have a directional touch giving the racer the ultimate tune-ability. These Ellipse tires come pre-mounted to the JConcepts Mini-T 2.0 Mono Wheels. Package includes two optional pre-mounted tires intended for the front or rear of the Losi Mini-T 2.0 or the rear of the Mini-B.Features:
Ellipse center-bar control and support
Diamond “home plate” design with extension webs
Available pre-mounted for Mini-T 2.0 (front/rear), Mini-B (rear)
Super Soft, Green compound
Includes open cell foam inserts
Available in bright white or fluorescent yellow
JCO3152-201021, JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires (Yellow) (2) (Pink) w/12mm Hex
JConcepts Fuzz Bite LP 2.2" Mounted Rear Buggy Carpet Tires are designed with radius positioning to enhance the drive on carpet and turf surfaces. The pre-mounted JConcepts tires include open cell, medium inserts for plush control mounted on JCO3348 Mono wheels available in bright white and fluorescent yellow.
The Fuzz Bite lands on a low-profile carcass carried over from tires such as the Twin Pin. The low stance provides quick transition at high-speed and minimizes side-wall deflection and roll. The pin is specially built in a reverse “water tower” shape planting the larger base at the bottom and narrowing at the top for precision. The pins are placed in a radius and repeated about for a healthy nest of pins to dig deep into matting in office carpet or tight knit CRC carpeting.
The alternating rows of pins provides side-bite, and the tightness gives forward traction. The arrangement of the pins promotes good wear characteristics and traction longevity. The Fuzz Bite incorporates a small radial rib on the outside with angular cross to give consistent cornering but also forward mid-corner launch grip.
A unique feature on the Fuzz Bite is the scalloped tire bead which removes a lot of weight from a normally beefy area. The tips of the bead touch off on the inner beads on the wheel which lead to a great alignment but now with reduced rotating weight. During the gluing process, it is also handy to have some breathing room for the glue process and the geometry gives many edges and ledges to adhere to.
Features:
Pre-mounted
JConcepts original design, details, and materials
Low profile carcass layout
Reverse “water tower” pin shape
Radius positioned pin arrangement
Directional sidewall lugging
Ultra-light weight scalloped tire beads
Plush open cell inserts included
Mounted on authentic JCO3348 wheels
This product was added to our catalog on May 27, 2022
JCO5015, JConcepts Masking Tape (12mmx50m)
JConcepts Masking Tape. This premium masking tape offers a great solution for any hobbyist looking to perform simple paint schemes with multiple colors with crisp lines and color separation. Available in multiple sizes the narrower, 12mm x 50m length roll is great for performing detail work, slight curvature to mockup a design to the inside of a body shell of choice. The wider, 24mm x 18m roll is good for masking off larger areas or to quickly cover more space. Package includes one roll of tape.
This product was added to our catalog on January 19, 2023
