AANM5301, Atlantis 1/104 PBY-5A Catalina US Navy Seaplane
1/104 Scale. This kit comes from the classic Monogram tooling. This was of the first Aircraft kits they produced along with the B-26 and the B-25 which we also own the tooling for. The kit features engraved markings and lots of rivets but is a classic. It has a wingspan of 12 inches and measures 8.25 inches long. Decals are included for 2 versions and it comes with a nice sprue of clear parts, 6 in total. New artwork based on a PBY rescuing the men from the ill fated USS Indianapolis. The oval PBY logo is on the decal sheet if you wish to mount your PBY on our clear globe swivel stand sold separately.
This product was added to our catalog on November 9, 2021
AANH218, B-24J Liberator Bomber Buffalo Bill Model Kit 1/92
Product Number: H218UPC: 850002740042Manufacturer: Atlantis Toy & Hobby Inc.Category: Models >Models >>Other & MiscellaneousDescription:B-24J Liberator Bomber Buffalo Bill Model Kit 1/92
This product was added to our catalog on November 9, 2021
AANH208, Atlantis Models Boeing B-29 Superfortress 1:120 with Swivel Stand
This is a reissue of the classic 1/120 scale Boeing B-29. It measures 10 1/2 inches long with a 14 inch wingspan. This kit comes molded in silver, with clear swivel stand, and a second display stand option. Updated decals for 3 versions! Officially licensed with Boeing!
Skill Level 2.
History of the B-29 Superfortress:
The part that the B-29 Superfortress played in the victory in the Pacific will be remembered for a long time. From the time of their first raid over Japan on June 15th 1944, until the last Atom bomb was dropped on Nagasaki August 9th 1945,
the giant planes dropped 171,060 tons of bombs on their targets and flew 100 million miles in doing it. The B-29's advanced design allowed it to remain in service in various roles throughout the 1950s. The B-29 was the only aircraft that ever used nuclear weapons in combat. The B-29 had a wingspan of 141 ft 3 in, was 99 ft long, and was 27 ft 9 in high. The gross weight of the plane was 135,000 lb and it's bomb load was 10 tons. Its four, 18 cylinder Wright Cyclone engines, equipped with dual turbo-chargers were rated at 2,220 horsepower each. Cruising speed was set at 300 miles per hour, while the top speed was 375 mph.
This product was added to our catalog on November 9, 2021
Blackbeard the Bloodthirsty Pirate 1/10 Plastic Model Kit
1/10 Scale. This is a reissue and comes from tooling made back in 2013 by Atlantis. Based on the Classic Aurora kit. This kit comes molded in light gray and brown with the new square box and a decal sheet for his treasure chest. Plastic Parts are molded in China. Decals, instructions and packaging are made in the USA. Includes Blackbeard figure with weapons, ships deck and wheel, treasure chest with waterslide decals with blackbear nameplate.
Within the rogue’s gallery of 16th Century pirates, there were few as fearedas Blackbeard. Born as Edward Teach in 1680 Bristol, England, he trolled theWest Indies and the east coast of Britain’s North American colonies in search ofill-gotten booty.
Upon sight of his ominous sailing ship, “Queen Anne’s Revenge,” most merchantships, as well as would-be opponents, would reverse course and retreat lest theybecome engaged in vicious confrontation with the bloodthirsty sea bandit.
Besides his full and flowing beard from which he coined his imposing sailingname, Blackbeard was also known for his coveted buried treasure, that whichhas yet to be found, even to this day.
1/32 1956 Cadillac Eldorado with Glass Plastic Model Kit
This kit comes from the old amt/revell tooling. Includes chrome plated parts and newly tooled glass. 2 figures, multi piece body and detailed endinge and interior. Skill level 2. Officially licensed from general motors.
Fred Flypogger as Superfuzz
Superfuzz Fred Flypogger himself as a happy friendly lawman. Dig him with his drool in his supercharged prowl car, complete with persuader, machine gun and handcuffed culprit, but still looking for bad guys. This humorous figure stands 6 1/2 inches high with 'gumball machine' helmet, exhaust smoke cloud, and the little signature Mouse up front. Eyes can be positioned anywhere to change expression. 42 parts in kit.
1/72 Scale. This kit is molded in silver and includes a Clear dome top and 5 clear parts underneath. This kit has not had the clear dome included in many years. The dome and other parts are also included molded in silver as well. The kit features new box art and for the first time is issued in the classic Aurora Square box. 8 1/4 X 8 1/4 X 3 1/4. Features detailed interior with crew figures. Skill level 2. Saucer has a 7 inch diameter.
1/48 Scale. Highly detailed kit comes from the Aurora tooling. Complete with small decal sheet, detailed instructions, rubber tracks and 4 figures. Skill level 2.The Type 97 Chi-Ha was a medium tank used by the Imperial Japanese Army during the Second Sino-Japanese War, the Battles of Khalkhin Gol against the Soviet Union, and the Second World War. It was the most widely produced Japanese medium tank of World War II. A total of 1,162 units were produced from 1938 through 1942.It was equipped with a 57mm main gun, a short-barreled weapon with a relatively low muzzle velocity, designed for infantry support. The main gun had no elevation gear, therefore, the gunner used his shoulder to elevate it! The 170 hp Mitsubishi air-cooled diesel engine was a capable but slow tank engine in 1938.The Type 97's low silhouette and semicircular radio antenna on the turret distinguished the tank from its contemporaries. After 1941, the tank was less effective than most Allied tank designs. In 1942, a new improved version of the Chi-Ha was produced with a larger three-man turret, and a high-velocity Type-1 47mm tank gun. It was designated the Type 97-Kai or Type 97 Shinhoto Chi-Ha.After World War II the Type 97 tanks captured by the Soviets were turned over to the Communists Chinese army. They remained in use under the new ownership, during the Chinese Civil War. After victory, the Chinese People's Liberation Army (PLA) continued to use them in their inventory.
This kit comes molded in 4 colors Red, Black, Silver and clear for the windshield. Features detailed chassis and engine with interior tin. Easy snap construction. Waterslide Decals. Skill level 1.Russell James Liberman was an American funny car drag racer, nicknamed "Jungle Jim." In 2001, he was named #17 on the list of the Top 50 NHRA drivers of all time and is in the International Drag Racing Hall of Fame. Liberman was known for driving backwards at 100 miles per hour after doing his burnout.Liberman was a flamboyant showman who primarily toured the United States at drag racing match race events. During his career, he averaged an estimated 100 events per year during the 1970s. He was regarded by many as the "greatest showman the drag strip has ever experienced." He drove a Vega funny car, in three distinct incarnations. The first Vega, painted candy blue, appeared in August 1972, the 2nd was a darker blue, and the third version (similar to this model) made its debut in 1974.
1/32 Snap Tom McEwen Rail Dragster Plastic Model Kit
1/32 Snap Tom McEwen Rail Dragster Plastic Model Kit
1/32 Scale. Snap assembly. This kit comes molded in 3 colors, Red, Black and Silver. Features detailed Hemi engine, rolling wheels, removable top section, and waterslide decals. Officially licensed. Skill level 1. 8 inches LongTom McEwen was an American drag racer and a winner of the National Hot Rod Association (NHRA) U.S. Nationals. His racing career spanned 45 years. He is ranked at number 16 on a list of the 50 most significant drivers of NHRA�s first 50 years. He received the nickname "the Mongoose" in 1964 from engine builder Ed Donovan. It was originally used as a device to entice Don "the Snake" Prudhomme into a high-exposure match race.In 1972, McEwen won his first major event when he dominated the Top Fuel field at the Bakersfield March Meet. A year later, he scored his first NHRA national event victory by topping the Funny Car field at the SuperNationals at Ontario Motor Speedway.He went on to win four more national events, including his dramatic U.S. Nationals Funny Car victory over Prudhomme in 1978. The win came only a few days after the death of his son Jamie, who had battled leukemia.McEwen won the AHRA World Finals at Spokane Raceway Park in 1982, the prestigious Big Bud Shootout in 1984, and Top Fuel at the 1991 Summernationals at Englishtown, New Jersey.He retired from racing in 1992, and was inducted into the Motorsports Hall of Fame of America in 2001.
