TRA6852R, Traxxas Rear Heavy Duty Steel CV Driveshaft (2)
This is an optional Traxxas Rear Steel Constant-Velocity Driveshaft Set, and is intended for use with the Traxxas Slash 4X4 and Slash 2wd 1/10 scale short course trucks, as well as the Traxxas Rally. Traxxas Steel Constant Velocity Shafts offer the ultimate in torque handling and efficient power transfer. The outer U-joints are lubricated and sealed by a rubber boot for maximum protection against the elements, and the U-joint pins are held captive so you never have to worry about losing a pin. Gleaming nickel-plated shafts and blue silicone boots add a custom look.
This product was added to our catalog on September 7, 2021
RCE1850BL, Slash 2/4WD Aluminum Rear Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.*Firm Springs Included
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
RCE1849BL, Slash 2/4WD Aluminum Front Shock (pr) - Blue
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).
*Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
TRA5883, Traxxas BFGoodrich KM2 Tire w/Split-Spoke Rear Wheel (2) (Black) (Standard))
This is a set of two Traxxas BFGoodrich Mud-Terrain T/A KM2 Tires, Pre-Mounted on Split-Spoke SCT Wheels. These are intended for use on the front and rear of the Traxxas Slash 4x4 and the rear of the Traxxas Slash 2wd line of trucks. These are fully licensed BFGoodrich Mud-Terrain T/A tires, and have been proven performers in TORC series competition. The distinctive tread design has been faithfully re-created, complete with white sidewall lettering.
Fits:
Traxxas Nitro Slash
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Telluride 4x4
The design of the Split-Spoke SCT wheel features a black center and color molded beadlock detail in either blue or chrome for a realistic look. Fully compatible with factory Traxxas and aftermarket 2.2/3.0 tires, the wheels feature 12mm hexes and the same offset as Slash 2wd rear wheels.
This product was added to our catalog on May 10, 2021
68086-4, Traxxas Slash 4X4 VXL Brushless 1/10 4WD RTR Short Course Truck w/TQi & TSM
Short Course Performance on a Whole New Level
The Traxxas Slash defines the Short Course truck segment and sets the standard for durability, performance, and technology. Innovative features like Traxxas Stability Management (TSM), modular chassis design, and ultra-efficient shaft drive complement Slash’s track-tested precision and rock-solid durability. Slash 4X4’s extreme Velineon brushless power provides screaming 60+mph speed while the TQi radio system keeps everything under precise control. With just one drive you will see why the Traxxas Slash 4X4 elevates Short Course performance to a whole new level.
Traxxas Stability Management
Traxxas Stability ManagementTM (TSM) allows you to experience your Slash’s extreme power, speed, and acceleration by making it much easier to control on slippery surfaces such as loose dirt, smooth concrete, and even ice and snow. Go ahead, punch it off the line!
Features:
Traxxas Stability ManagementTM (TSM)
Powered by the Velineon® Brushless Power System
Slash 4X4 reaches speeds in excess of 60+mph!*
Traxxas High-Current Connector (patented) allows high-capacity battery packs to deliver maximum voltage to the Velineon Brushless Power System
Exclusive waterproof electronics extend brushless power and performance to water, mud, and snow
Velineon VXL-3s Electronic Speed Control
TQi 2.4GHz transmitter
Single-screw motor access makes gear-mesh adjustments fast and easy and the motor can be removed in just seconds
Speed control and receiver are securely fastened to chassis
Integrated Personal Transponder Mount
Versatile battery compartment easily adapts to multiple styles of batteries; 6 or 7-cell NiMh battery packs and various configurations of Lithium Polymer packs are no problem for Slash 4X4
Digital high-torque Traxxas TRA2075 waterproof steering servo
Waterproof, o-ring sealed receiver box
Sealed, silicone-filled differentials
Revo-Spec Torque-Control™ slipper clutch system
Fully adjustable oil-filled Ultra Shocks™ with X-ring technology
White powder coated shock springs feature a responsive spring rate
Telescoping universal-joint driveshafts
Rubber-sealed ball bearings
Scale all-terrain front and rear tires offer superior on- and off-road traction
Pre-glued all-terrain tires with high-performance foam inserts
ProGraphix painted race replica bodies
Specifications:
Length: 22.36 Inches (568mm)
Front Track: 11.65 Inches (296mm)
Rear Track: 11.65 Inches (296mm)
Center Ground Clearance: 2.83 Inches (72mm)
Weight: 93.1oz (2.64kg)
Height (overall): 7.60 Inches (193mm)
Wheelbase: 12.75 Inches (324mm)
Tires: Traxxas 2.2" Pre-Glued with Foam Inserts
Speed Control Type: VXL-3s™ Electronic Speed Control
Motor (electric): Velineon® 3500 Brushless
Gear Pitch: 32
Radio System (transmitter): TQi™ 2.4GHz (2-channel)
Radio System (receiver): Traxxas Stability Management (TRA6533)
Top Speed: 60+mph*
Skill Level: 1
Included Accessories: Precision Tool Set
Required Items: NiMh, or LiPo Battery, Charger, and 4 "AA" Batteries (for transmitter)
*With optional gearing and 3S LiPo battery (items sold separately).
Needed To Complete:
(4) "AA" Batteries (for transmitter)
(1) LiPo (2S 7.4V or 3S 11.1V) Battery Pack or NiMH (6-Cell 7.2V) Battery w/iD Connector
(1) Compatible Battery Charger w/iD Connector
This product was added to our catalog on April 12, 2021
TRA3739, Traxxas Screw Pin Set
This is a replacement suspension screw pin set from Traxxas. These suspension screw pins are used where the suspension arms pivot.
Fits:
Traxxas Bandit
Traxxas Hoss
Traxxas Nitro Slash
Traxxas Rally
Traxxas Rustler 2wd
Traxxas Rustler 4x4
Traxxas Slash 2wd
Traxxas Slash 4x4
Traxxas Slash 4x4 Ultimate
Traxxas Stampede 2wd
This product was added to our catalog on April 12, 2021
TRA6780, DIFF KIT CENTER COMPLETE
Accessory part for these models:
Hoss® 4X4 VXL
Rustler® 4X4 VXL
Rustler® 4X4
Slash 4X4 Platinum
Slash 4X4 Ultimate
Slash 4X4 VXL
Slash 4X4
Stampede® 4X4 VXL
Stampede® 4X4
This product was added to our catalog on September 7, 2021
TRA7448, Traxxas Progressive Rate Long GTR Shock Springs (Blue - 0.892) (2)
This is a pack of two "Blue - 0.892 Rate" Traxxas Progressive Rate Long GTR Shock Springs. These are the stiffest progressive springs available for the Long shock (TRA7461X). Traxxas offers a wide variety of spring rates for the GTR shocks to provide almost limitless tuning possibilities. The springs are made from high-quality spring steel with durable powder-coated finishes, and the spring rate is indicated by colored dots on the end of the spring.
Long Spring Rates:
Softest
TRA7440: Orange - 0.623 Rate
TRA7441: Green - 0.653 Rate
TRA7444: Black - 0.767 Rate
TRA7445: Pink - 0.810 Rate
TRA7448: Blue - 0.892 Rate
Stiffest
Effects of Shock Spring Changes
Shock Spring
Characteristic
Softer
Increased Chassis Roll
Increased Traction
Better in Bumpy Conditions
More Likely to Bottom Out
Stiffer
Decreased Chassis Roll
Decreased Traction
Increased Responsiveness
This product was added to our catalog on May 13, 2021
RCE1849RD, Slash 2/4WD Aluminum Front Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment. Replaces the kit plastic shocks (TRA3760).*Firm Springs Included
Specifications:
Spring Length: 57mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
SPTST3677B, ST Racing Concepts Aluminum Rear Motor Guard (Blue)
Aluminum Rear Motor Guard, Blue, for Traxxas Slash / Stampede VXL / Rustler VXL / Bandit VXL
Precision CNC Machined from high grade aluminum, our rear aluminum motor guard adds extra protection around the motor area and provides more strength to the rear of your Traxxas vehicle, while enhancing the looks as well. Works with Traxxas Slash, Rustler VXL, Stampede VXL and Bandit VXL. Anodized Royal Blue
This product was added to our catalog on December 16, 2021
RCE1850R, Slash 2/4WD Aluminum Rear Shock (pr) - Red
Slash 2/4WD Aluminum Rear Shock (pr) - Red
Improve the handling and adjustability of your 2WD or 4WD Slash with this precision aluminum shock set. Completely assembled and ready for your choice of shock fluid, the shocks feature threaded preload collars for fine spring adjustment.
Specifications:
Spring Length: 66mm
Spring ID: 20mm
Spring Wire: 1.5mm
This product was added to our catalog on September 7, 2021
EXO2131, Exotek Slash 4X4 HD Steel Front CVD Set
Exotek Slash 4X4 HD Steel Front CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.NOTE: Requires blue thread lock and cvd oil or grease (not included).Includes:
(2) 72mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on January 19, 2022
EXO2132, Exotek Slash 4X4/2WD HD Steel Rear CVD Set
Exotek Slash 4X4/2WD HD Steel Rear CVD Set. Designed to be an optional upgrade for the Traxxas Slash 4X4, Slash 2WD, Rally and Stampede 4X4 this CVD set is an excellent way to add durability to your vehicle. Constructed from high quality steel insures that this set will be reliable over the long run even with high power brushless systems. The updated differential cups use two set screws each to give ultra secure and reliable mounting.
NOTE: Requires blue thread lock and cvd oil or grease (not included).
Includes:
(2) 76mm CVD Axle Assemblies
(2) Differential Outdrives
(6) Set Screws
This product was added to our catalog on May 19, 2021
Yeah Racing 3mm Aluminum Threaded Rod Ends. These standard threaded rod ends are great for 3mm turnbuckles. Best results if paired with the Yeah Racing reverse thread rod ends (YEA-YA-0572DB). Package includes five aluminum rod ends.NOTE: These are standard threaded (clockwise). Please be sure of thread direction prior to purchase.Features:
Made from machined aluminum for a strong finish
Available in multiple colors to best match your build
