TRA2075, Traxxas 2075 Digital High Torque Waterproof Servo
This is a replacement Traxxas Digital High Torque Waterproof Servo.
Specifications:
Torque: 125 oz-in
Speed: 0.17 sec/60°
This product was added to our catalog on April 20, 2021
TRA2075X, Traxxas 2075X High Torque Metal Gear Waterproof Digital Servo
This is a replacement Traxxas 2075X Digital High Torque Metal Gear Waterproof Servo. This servo is included with the TRX4 as standard equipment.
Features:
Metal Gear, Ball Bearing
Digital High-torque 125 oz-in.
Transit Time .17 sec/60°
L=55mm, H= 42.75mm, W=21.5mm
Fits:
Traxxas 4-Tec 3.0
Traxxas Drag Slash
Traxxas E-Revo VXL 2.0
Traxxas Hoss
Traxxas Rustler 4x4
Traxxas TRX-4
Traxxas TRX-4
Traxxas Unlimited Desert Racer
This product was added to our catalog on April 14, 2021
TRA1844, Traxxas Large Servo Saver
This is a large servo saver from Traxxas. This servo saver mounts to the servo, and provides protection for your steering servo by allowing flex in the steering linkage during a crash.
This product was added to our catalog on September 7, 2021
TRA2085X, Traxxas X-Maxx/XRT Waterproof Digital High-Torque Servo
This is the Traxxas X-Maxx/XRT Waterproof Digital High-Torque Servo. This metal gear (ball bearing) waterproof servo also includes the servo saver spring and assembled steering link.The X-Maxx steering servo includes full metal gears and adds a massive 23% more torque to take on the most extreme environments. The kit also includes a stiffer servo saver spring and steel steering linkage for increased precision and control during high speed driving.
Accessory part for these models:
Maxx®
X-Maxx®
This product was added to our catalog on September 7, 2021
TRA2065R, Traxxas Servo Sub-Micro Waterproof Metal Gear
Servo, sub-micro, waterproof, metal gearThe 2065R waterproof sub-micro servo adds the superior durability of all-metal gears for the best driving experience possible.
Accessory part for these models:
1/18 LaTrax® Desert Prerunner
1/18 LaTrax® Rally
1/18 LaTrax® Teton®
Summit
TRX-4M™ 1/18 Ford® Bronco®
TRX-4M™ 1/18 Land Rover® Defender®
TRX-4® 1979 Chevrolet® Blazer®
TRX-4® 1979 Ford® Bronco®
TRX-4® Chevrolet® K10 High Trail Edition™
TRX-4® Equipped with Traxx®
TRX-4® Ford® Bronco®
TRX-4® Ford® F-150® High Trail Edition™
TRX-4® Land Rover® Defender®
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
This product was added to our catalog on September 7, 2021
TRA8247X, Traxxas TRX-4 Metal Steering Servo Horn
Traxxas TRX-4 Metal Steering Servo Horn. This is the optional sintered metal servo horn. Package includes one horn and one 3x14 button head screw.
This servo horn is compatible with any standard servo featuring a 25 tooth spline.
This product was added to our catalog on September 7, 2021
TRA2255, Traxxas 400 High Torque Metal Gear Waterproof Brushless Servo (Red) (High Voltage)
The Traxxas 400 High Torque Metal Gear Waterproof Brushless Servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A cutting edge brushless motor provides 400 ounce-inches of torque for extreme applications.* The High-Torque 400 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit.
The Power to Perform
With over 3 times more torque than the standard #2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single #2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.
Waterproof Not "Water Resistant"
Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.
For TRX-4 Installation
The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit (TRA2262) and a steel servo horn (TRA8247X) is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.
NOTE:
*Compatible with most Traxxas 1/10 scale electric models
Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn
Compatible with Traxxas nitro models using rechargeable 5-cell battery packs
Not recommended for X-Maxx
Features:
Factory fit for drop-in installation into Traxxas Models
Fully waterproof, not “water resistant”
Compatible with Traxxas Stability Management™ (TSM)
400 oz-in torque at 6.0V
0.15 sec/60° at 6.0V
Metal gears
Dual ball bearings
Brushless motor technology
Aluminum center case
Specifications:
Motor Type: Brushless
Operating Voltage: 6.0 - 7.4V DC
Speed: 0.15 sec/60° at 6.0V
Torque: 400 oz-in at 6.0V
Weight: 64g
Gears: Metal
Output Spline: 25T
Case: Plastic top/bottom, anodized aluminum center
Controller: Digital
This product was added to our catalog on April 12, 2021
SAVSH0263MGP, Savox SH-0263MGP Micro Metal Gear Digital Servo
The Savox SH-0263MGP Metal Gear Digital Micro Servo is quick and built tough. It's small size and superb overall performance makes this servo ideal for applications such as 450 size helicopters.
NOTE: "Plus" models feature Soft Start and Sanwa SSR Compatibility
Features:
Metal gear train ensures durability and longevity.
Aluminum middle case allows for cooler operating temperatures.
Ideal for small planes, and 450 size helicopters.
Dual ball bearing support.
Specifications:
Torque:
@4.8v: 1.8kg/25.0oz-in
@6.0v: 2.2kg/30.6oz-in
Speed:
@4.8v: 0.13 sec/60 deg
@6.0v: 0.10 sec/60 deg
Dimensions (LxWxH) 22.8 x 12.0 x 25.4mm
Weight: 15.0g
Includes:
(1) SH-0263MGP Micro Metal Gear Digital Servo
Plastic Servo Arms and Hardware
This product was added to our catalog on March 23, 2023
Servo, sub-micro, waterproof
TRA2065A, SERVO SUB-MICRO WATERPROOF
Replacement part for these models:
1/18 LaTrax® Desert Prerunner
1/18 LaTrax® Rally
1/18 LaTrax® Teton®
Summit
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® 2021 Ford® Bronco
TRX-4® Mercedes-Benz® G 500® 4X4²
TRX-4® Scale and Trail™ Crawler
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
Accessory part for these models:
TRX-4® Equipped with Traxx®
TRX-4® Sport Unassembled Kit
TRX-4® Sport
This product was added to our catalog on September 7, 2021
TRA2018, Traxxas 2018 Plastic Gear Standard Servo
This is a Traxxas 2018 Plastic Gear Standard Servo. This servo is used in a variety of Traxxas models, including the Villain EX boat, Stampede, Rustler, Jato, T-Maxx and Revo trucks, as well as the Nitro 4-Tec.
Specifications:
Length: 1.59"
Width: 0.77"
Height: 1.58"
Torque: 42.0 oz-in
Transit Time: 0.22 seconds/60°
Weight: 1.5 oz
This product was added to our catalog on May 7, 2021
The Savox SH-0263MG metal-gear, digital, micro servo is quick and built tough.Features:
Metal gear train ensures durability and longevity.
Aluminum middle case allows for cooler operating temperatures.
Ideal for small planes, and 450 size helicopters.
Dual ball bearing support.
Specifications:
Torque @4.8v - 1.8kg/25.0oz-in
Torque @6v - 2.2kg/30.6oz-in
Speed @4.8v - 0.13 sec/60 deg
Speed @6v - 0.10 sec/60 deg
Dimensions L x W x H (mm):22.8 x 12.0 x 25.4
Weight: 15.0g
Waterproof High Voltage Digital Servo 0.13sec / 444.4oz @ 7.4V - Black Edition
The SW-1210SG-BE is the premier waterproof digital servo in the Savox Lineup. This coreless servo provides great torque and is a great upgrade if your looking to drive your RC vehicle in any condition...rain, sleet, or snow.
Features:
Strong unique steel gears provide durability and assurance.
Capable of HV operation.
Waterproof construction for harsh elements.
Ideal for cars, truck, and boats subject to water or snow.
Specifications:
Torque @ 6v - 20.0kg/277.7oz-in
Torque @ 7.4v - 32.0kg/444.4oz-in
Speed @ 6v - 0.15 sec/60 deg
Speed @ 7.4v - 0.13 sec/60 deg
Dimensions L x W x H (mm): 40.6 x 20.7 x 42.0
Weight: 71g
2250 - Servo, digital high-torque 330 coreless, metal gear (ball bearing), waterproof
TRA2250, SERVO 330 HIGH TORQUE CORELESS
This product was added to our catalog on September 7, 2021
CEGG36791A, CEN #6 Angled Hood Pin Body Clip (10)
This is a replacement pack of ten CEN F450 #6 Angled Hood Pins, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
This product was added to our catalog on March 15, 2021
YEA-YA-0574BU, Yeah Racing Aluminum Clamping Servo Horn (Blue) (25T)
Yeah Racing Aluminum Clamping Servo Horn. This optional servo horn is great for any RC model requiring a 25T servo horn. Package includes one clamping servo horn and one servo clamp screw.
Dimensions:
Hole Distance: 17mm, 19.5mm
Thread Diameter: 3mm
This product was added to our catalog on December 16, 2021
YEA-YA-0574RD, Yeah Racing Aluminum Clamping Servo Horn (Red) (25T)
Yeah Racing Aluminum Clamping Servo Horn. This optional servo horn is great for any RC model requiring a 25T servo horn. Package includes one clamping servo horn and one servo clamp screw.
Dimensions:
Hole Distance: 17mm, 19.5mm
Thread Diameter: 3mm
This product was added to our catalog on December 16, 2021
YEA-YA-0574BK, Yeah Racing Aluminum Clamping Servo Horn (Black) (25T)
Yeah Racing Aluminum Clamping Servo Horn. This optional servo horn is great for any RC model requiring a 25T servo horn. Package includes one clamping servo horn and one servo clamp screw.
Dimensions:
Hole Distance: 17mm, 19.5mm
Thread Diameter: 3mm
This product was added to our catalog on December 16, 2021
HRC35055S, Hitec HS-5055MG Digital Metal Gear Sub Micro Servo
This is a Hitec HS-5055MG Digital Metal Gear Sub Micro Servo. Since its introduction, the HS-55 has set the standard for affordable performance, offering precision components that have been engineered to provide long lasting trouble free service! Enter the new HS-5055MG digital, metal geared version...with this new servo Hitec takes ultra micro performance to the next level without breaking the bank. The new HS-5055MG is a perfect choice for ”smaller” high performance electric helicopters, aircraft and sailplanes, as well as micro surface applications.
Specifications:
Speed:
4.8V: 0.2 sec/60 deg.
6.0V: 0.17 sec/60 deg.
Torque:
4.8V: 18.05 oz/in
6.0V: 22.2 oz/in
Length: 0.9in (22.8mm)
Width: 0.46in (11.6mm)
Height: 0.94in (24mm)
Weight: 0.34oz (9.5g)
Limited Warranty:
Hitec Servo Warranty: Each Hitec servo is backed by a limited two-year warranty from the date of purchase. Hitec RCD USA, INC. shall REPAIR OR REPLACE, at Hitec RCD, INC., defective equipment covered by this warranty, otherwise the purchaser and/or consumer is responsible for any charges for the repair or replacement of the product.
This product was added to our catalog on December 16, 2021
HRZ00007, Horizon 13g Waterproof Metal Gear Servo
This is a replacement Pro Boat 13g Waterproof Metal Gear Servo, intended for use with the 17" Deep-V Power Boat Racer.
This product was added to our catalog on March 24, 2021
Savox SW-2210SG Brushless Waterproof Premium Digital Servo (High Voltage)
The Savox SW-2210SG Brushless Waterproof Premium Digital Servo is perfect for Monster Truck and most Scaler and Crawler applications where a slightly taller servo can be fitted.
Specifications:
Gears: Precision steel
Torque @7.4V: 500oz-in
Speed @7.4V: 0.11 sec
Waterproof: Yes - IP67 standards (operates for up to 30 minutes in water up to 3 feet deep)
This product was added to our catalog on March 18, 2021
HPS-CT700– S.Bus2 High-Voltage Low-Profile Surface Servo
High Performance Servo with Brushless Motor (01102321-3)
FEATURES:– Suitable for RC cars 1/10 scale on/off road and drifting.– Programmable/HV Brushless Servo.– Custom New high power Brushless Motor.– Supports SR mode with T7PX.– Programmable and compatible with S.Bus and S.Bus2 systems.– Can be connected to a PC using the CIU-2/-3 USB adapter sold separately.– Upper/middle/bottom: Aluminum Case
Speed：0.07sec/60°(7.4V) ／ 0.08sec/60°(6.0V)
Torque：30.0kgf・cm(7.4V) ／ 23.0kgf・cm(6.0V)
Dimensions/Weight：40.5×21.0×26.2mm/54g
RATED VOLTAGE:DC 6.0V-7.4V
OPERATING VOLTAGE:DC 4.8-8.4V
ONLY FOR RC CARS SMALLER THAN 1/5 SCALE
AXI31619, Axial AS-1 Micro Servo
The Axial AS-1 Micro Servo is a replacement micro servo intended for use with the Axial 1/24 Scale Deadbolt Mini Crawler. This package contains one micro servo.
This product was added to our catalog on June 5, 2021
This is a replacement set of two CEN F450 SD Front +2mm Wheel Hex Hubs, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 16, 2021
SPMS904HV, Spektrum RC S904HV 1/6 High Voltage 18KG Steering Servo
This is a Spektrum RC S904HV 1/6 High Voltage 18KG Steering Servo
Specifications:
Torque: 496 oz-in
Speed: 0.216 sec @ 6v
Length: 2.33 in (59.1mm)
Width: 1.14 in (29mm)
Height: 2.16 inch (54.9mm)
This product was added to our catalog on March 19, 2021
PTK-160SS, ProTek RC 160SS Low Profile Super Speed Metal Gear Servo High Voltage/Metal Case
This is the ProTek R/C 160SS Low Profile Digital "Super Speed" Metal Gear High Voltage Servo. ProTek R/C Servos have been developed to provide enthusiasts with high quality servo's that will exceed expectations at every level. With features that meet or surpass what our competition can provide, ProTek R/C servos deliver performance and unmatched value, with industry leading customer support.
The ProTek R/C 160SS High Voltage Low Profile servo delivers an incredible 127 oz-in of torque and 0.05 transit speed at 6.0V, and when you bump the voltage to 7.4 the spec's increase to 152 oz-in and 0.04! Spec's like these make this servo an excellent choice for any 1/12 to 1/10 scale vehicle application. Other features include a full aluminum case that provides bomb proof durability and improved heat dissipation, a metal gear train that is supported by dual ball bearings, a 160mm long 22awg connector wire with gold plated connectors, and a coreless motor.
Plus, instead of a cheap plastic servo horn, ProTek R/C goes the extra mile with an included aluminum single arm servo horn that will stand up to a majority of the punishment you can throw at it. And for additional rigidity, four blue aluminum servo ear guides are included as alternatives to the rubber grommets. Stop wasting your money on budget servos that look good in the spec list, but fall short when its time to perform. Get ProTek and don't look back.
Features:
Low-Profile case saves space and weight
Ideal for any 1/12 to 1/10 scale vehicle application
Full aluminum case
High voltage circuitry
0.05 transit speed, and 127 oz-in of torque @ 6.0V
0.04 transit speed, and 152 oz-in of torque @ 7.4V
Aluminum single arm servo horn
Full metal gears and dual ball bearings
160mm long 22awg connector wire w/gold plated connectors
Coreless motor
Servo Model
160SS
Recommended Application
1/12 to 1/10 scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.05/60° sec
Operating Speed @ 7.4V
0.04/60° sec
Dynamic Torque @ 6.0V
127 oz-in (9.1 kg-cm)
Dynamic Torque @ 7.4V
152 oz-in (11 kg-cm)
Motor Type
High Efficiency Coreless Motor
Output Shaft
25 Tooth
Gears
Metal
Weight
54.5g
Pulse/Frequency
1520?s / 333hz
This product was added to our catalog on March 19, 2021
SAVSW1210SG, waterproof High Voltage Digital Servo 0.13sec / 444.4oz @ 7.4V
The SW-1210SG is the premier waterproof digital servo in the Savox Lineup. This coreless servo provides great torque and is a great upgrade if your looking to drive your RC vehicle in any condition...rain, sleet, or snow.
Features:
Strong unique steel gears provide durability and assurance.
Capable of HV operation.
Waterproof construction for harsh elements.
Ideal for cars, truck, and boats subject to water or snow.
Specifications:
Torque @ 6v - 20.0kg/277.7oz-in
Torque @ 7.4v - 32.0kg/444.4oz-in
Speed @ 6v - 0.15 sec/60 deg
Speed @ 7.4v - 0.13 sec/60 deg
Dimensions L x W x H (mm): 40.6 x 20.7 x 42.0
Weight: 71g
This product was added to our catalog on April 15, 2021
This is a replacement CEN F450 SD Sway Bar Arm, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 15, 2021
PTK-160TBL, ProTek RC 160TBL "Black Label" Low Profile High Torque Brushless Servo
Brushless servo technology has improved by leaps and bounds. Finally, brushless servos can deliver holding power, speed and precision that can compete with a coreless servo. Combine that with the superior efficiency and lifespan of a brushless motor and you have a servo that hits all the marks, with the performance and quality required for a pro level build.
A black anodized aluminum case with aluminum and gold accents give this servo a stealthy look that sets it apart from the rest. The aluminum upper case provides bomb proof durability and the heat sink center case offers efficient heat dissipation and helps to reduce weight. An aluminum, single arm clamping servo horn is included, as well as a full set of servo mounting washers for a rock solid and durable installation.
NOTE: If you experience glitching or poor performance while using a Futaba transmitter, you must turn off BLS mode. BLS mode is only compatible with Futaba BLS type servos.
Features:
Used by Ryan Maifield to win the 2019 Roar 4wd Off-Road National Championships
Ideal for any 1/10 to 1/8 surface application that can benefit from a low profile configuration
Full aluminum black anodized case
High voltage circuitry
0.08 transit speed, and 230 oz-in of torque @ 6.0V
0.06 transit speed, and 290 oz-in of torque @ 7.4V
Includes aluminum single arm clamping servo horn and servo mounting washers for a rock solid installation
140mm long servo lead
Full metal gears and dual ball bearings
Brushless motor
Servo Model
160TBL
Recommended Application
1/10 to 1/8 Scale Surface
Operating Voltage
4.8V - 7.4V
Operating Temperature
14° to 140° F (-10 to +60° C)
Operating Speed @ 6.0V
0.08/60° sec
Operating Speed @ 7.4V
0.06/60° sec
Dynamic Torque @ 6.0V
230 oz-in (16.5 kg-cm)
Dynamic Torque @ 7.4V
290 oz-in (20.9 kg-cm)
Motor Type
Brushless
Output Shaft
25 Tooth
Gears
Metal
Weight
55g
Pulse/Frequency
1520?s / 333hz
Dimensions
39.5x20x30.6mm
Length (Bottom to Mount)
19.35mm
This product was added to our catalog on May 23, 2023
SEHREEFS146, Reefs RC Black Low Pro High Torque/Speed: Fully Programmable Servo
RAW800 Black Low Pro: Fully Programmable Servo
Specifications:
High Torque High Speed
4 POLE - Brushless
SUBMARINE WATERPROOF: 7 Point Seals
Magnetic Angle Sensor
Voltage 4.8V - 8.4V
REEFS LINK required for Programming (Optional)
Internal: Steel Gears
CNC Aluminum Casing
Bearing Type: 2 Ball Bearings
Weight: 2.3oz / 66gm
Dimension LWH: 1.6 x .79 x 1.16 / 40.8x20.2x29.5mm
Torque: 635oz @ 6v/ 715oz @7.4v/ 800oz @8.4v
Speed: .12sec @6v/.10sec @7.4v/.09sec @8.4v
Spline: 25T / Dead Band Width: 2¦Ìs
BEC Not Req. Recommended for max performance
This product was added to our catalog on May 8, 2023
