ARAC3445, AR390165, Arrma 1/10 Body Clip Retainer (Black) (4)
This is a pack of four replacement Arrma 1/10 Body Clip Retainer in Black color.
This product was added to our catalog on February 20, 2022
AR390178, Arrma 1/8 Body Clips w/Rubber Retainers (Black) (4)
These high quality body clip retainers tether your body clips to your bodyshell. This means that you do not lose your clips when they become detached from the body post during a roll-over when running your vehicle, meaning no more lost clips when you have removed your bodyshell.
Features:
Produced from strong, flexible rubber to provide durability
Specially designed bodyshell grommet attaches retainer to hole in bodyshell
Large pull tab allows quick and easy body clip removal even with wet or cold hands
ARRMA branded
Supplied with large size body clips
Includes:
(4) ARRMA Body Clip Retainers
(4) Large size Body Clips
(1) Fitting Instructions
This product was added to our catalog on May 25, 2021
Arrma Safe-D5 Mod1 Pinion Gear
Arrma Safe-D5 Mod1 Pinion Gears feature a "D" shaped hole that allows the motor shaft to key inside the pinion gear, eliminating the loss of drive and brakes if the set screws comes loose. This tough steel Pinion Gear is available in multiple tooth count options, allowing you to fine tune the gear ratio.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 5mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
(1) Mod1 Safe-D Pinion Gear
(1) Set Screw - M4 x 4mm
(1) E-Clip - 3.2mm
This product was added to our catalog on March 14, 2021
ARA310945, Arrma 4S BLX 0.8Mod HD Steel Spur Gear (57T)
This is a Arrma 0.8Mod HD 57 tooth Steel Spur Gear for use with the Arrma Kraton and Outcast 4S BLX 4x4 kits. This optional heavy duty steel spur gear is CNC machined from super-tough steel for extreme durability.
Features:
Super-strong steel for long-lasting durability in extreme RC conditions
Precision manufactured 0.8 module tooth configuration for consistent Pinion Gear mesh and operation
57 tooth configuration
Includes:
(1) 57T HD Steel Spur Gear
This product was added to our catalog on May 1, 2021
ARA310948, Steel 57T Slipper Set 0.8Mod
This slipper set is supplied pre-built and ready to install in your vehicleFeaturesPrecision manufactured aluminum slipper hubs - High strength 57T 0.8 module steel spur gear for maximum power handling capability - Castellated slipper pads for assured location into spur gear - Stainless steel slipper plate - Supplied assembled and set, ready to install into your vehicleIncludes1 x Assembled Slipper Clutch with Steel Spur GearSpecificationsBack to Top ^Part TypeChassis Parts
This item was added to our catalog March 22, 2023
ARA550085, DBOOTS HOONS 53/107 2.9 Gold Belted 5-Spoke
Product Details
These high-quality dBoots tires are mounted on 5-spoke ARRMA wheels.
Features
Tires: Multi-surface all-road tires for awesome traction in all conditions - Molded-in belt to aid stability at high speeds - High-quality rubber for long-lasting durability - Pre-glued for trouble-free fit and servicing
Wheels: Multi-spoke design for stylish looks and increased strength - Tough nylon for durability on all surfaces - Black color for head-turning ARRMA styling - 17mm Hex for strength during extreme driving action and easy servicing
Inserts: High-quality inserts with excellent support for the tire tread - Specially designed to give the perfect balance of aggressive grip and easy handling characteristics
TECHNICAL INFORMATION:
Inner Wheel bead diameter: 3.27" (83mm)
Outer Wheel bead diameter: 2.95" (75mm)
Width: 2.09" (53mm)
Wheel hex size: 17mm
Overall diameter: 4.21" (107mm)
Includes
2 x Black 5-Spoke Wheels with pre-glued gold compound dBoots Hoons tires
Requires
To use 107mm diameter tires on the rear axle of your vehicle and 100mm diameter tires on the front axle you must change the ratio of the gearboxes to account for the different rollout values. To do this use GP5 gears in the front gearbox and GP6 gears in the rear gearbox:
FRONT:
#ARA311016
#ARA311017
REAR:
#ARA311018
#ARA311019
Product Specifications
Manufacturer #
ARAC1500
Wheel Position
Front/Rear
Wheel Hex Size
17mm
Search Keywords
felony
Vehicle Type
On-Road
Scale
1/7
Package Type
Pre-Mounted
Inner Tire / Outer Wheel Diameter
2.9 in
Compound / Hardness
Soft
This product was added to our catalog on April 10, 2021
ARA311031, Arrma BLX 4X4 HD Input Gear (13T)
This is a replacement Arrma 13T BLX 4X4 HD Input Gear, an ideal replacement for your BLX and Mega 4x4 BigRock, Granite, Senton and Typhon kit supplied parts.
Features:
Manufactured from tough, durable materials for a long service life
Precise dimensions for excellent fit and smooth operation
Hybrid construction combines a composite gear molded on to a metal splined shaft
13 tooth bevel gear
1.35 Module tooth profile
Note: To be used with ARA310956 Diff set
This product was added to our catalog on November 24, 2021
ARAC9763, AR310449, Arrma 17mm Aluminum Wheel Nut (Black) (4)
This is a pack of four replacement Arrma 17mm Aluminum Wheel Nuts. These nuts are serrated on one side.
This product was added to our catalog on December 1, 2021
ARAC4022, AR310872, Arrma 3S BLX Differential Case Set (37T)
This is a replacement Arrma 37 Tooth 3S BLX Differential Case Set. This high-quality Diff Case 37T Main Gear set provides replacement parts for your kit supplied items.
Features:
Tough composite material for durability and consistent performance under extreme operating conditions
Precision manufactured gear tooth configuration for smooth and trouble-free gear operation
High-quality diff case molding ensures a reliable diff seal
Integrated ring gear and diff case for strong construction
Includes:
(1) Ring Gear with Integrated Diff Case
(1) Diff Case Cap
This product was added to our catalog on October 11, 2021
ARA310780, Arrma 4x4 Composite Front Slider Driveshaft Set
Fits:
Arrma Big Rock 3S BLX
Arrma Granite 3S BLX
Arrma Granite 4x4 550
Arrma Granite 4x4 Mega
Arrma Senton 3S BLX
Arrma Senton 4x4 550
Arrma Senton Mega
Arrma Typhon 3S BLX
Arrma Typhon 4X4 550
Arrma Vorteks 3S BLX
This is a replacement Arrma 4x4 Composite Front Slider Driveshaft Set.
This product was added to our catalog on October 3, 2021
ARA390292, Arrma IC5 Loop Connector - EC5 Compatible
This is the Arrma IC5 Loop Connector for use with models that use two IC5 or EC5 connectors, and using one battery is desired.
This ARRMA IC5 Loop Connector allows the use of a 4S or 6S LiPo battery pack in your ARRMA vehicle. It should be connected to one of the ESC-to-battery plugs when using a single 4S or 6S battery.
The IC5 connector provides a reliable, efficient connection between the ESC and battery.
This product was added to our catalog on June 19, 2021
ARAC9472, AR310871, Arrma 14mm Wheel Hex (Metal) (2)
This is a Arrma 14mm Metal Wheel Hex Set use with the Arrma Big Rock Crew Cab, Granite and Senton 4x4 kits. These 14mm wheel hexes provide you with ideal replacements for your kit supplied items.
Features:
Constructed from high quality aluminum material
Precision manufactured for easy fit to your model
Retaining set screws included
Includes:
(2) 14mm Aluminum Wheel Hex
(2) M3x3mm Set Screw
Fits:
Arrma Big Rock 3S BLX
Arrma Granite 3S BLX
Arrma Granite 4x4 Mega
Arrma Infraction MEGA
Arrma Infraction V3 3S BLX
Arrma Senton 3S BLX
Arrma Vendetta 3S BLX
Arrma Vorteks 3S BLX
This product was added to our catalog on April 15, 2021
AR310864, Arrma 4x4 Composite Rear Slider Driveshaft Set
This is a replacement Arrma 4x4 Composite Rear Slider Driveshaft Set.
NOTE: Be sure to add loctite to the screw when securing the metal axle shaft.
This product was added to our catalog on October 3, 2021
ARA550073, DBOOTS HOONS 53/107 2.9 White Belted 5-Spoke
Product Details
These high-quality dBoots tires, mounted on ARRMA wheels, are direct replacements for your kit items.
Features
Tires: Multi-surface all-road tires for awesome traction in all conditions - Molded-in belt to aid stability at high speeds - High-quality rubber for long-lasting durability - Pre-glued for trouble-free fit and servicing
Wheels: Multi-spoke design for stylish looks and increased strength - Tough nylon for durability on all surfaces - Black color for head-turning ARRMA styling - 17mm Hex for strength during extreme driving action and easy servicing
Inserts: High-quality inserts with excellent support for the tire tread - Specially designed to give the perfect balance of aggressive grip and easy handling characteristics
TECHNICAL INFORMATION:
Inner Wheel bead diameter: 3.27" (83mm)
Outer Wheel bead diameter: 2.95" (75mm)
Width: 2.09" (53mm)
Wheel hex size: 17mm
Overall diameter: 4.21" (107mm)
Includes
2 x Black Five Spoke Wheels with pre-glued dBoots Hoons tires
Requires
To use 107mm diameter tires on the rear axle of your vehicle and 100mm diameter tires on the front axle you must change the ratio of the gearboxes to account for the different rollout values. To do this use GP5 gears in the front gearbox and GP6 gears in the rear gearbox:
FRONT:
#ARA311016
#ARA311017
REAR:
#ARA311018
#ARA311019
Product Specifications
Manufacturer #
ARAC1498
Compound / Hardness
Firm
Front or Rear
Rear
Inner Tire / Outer Wheel Diameter
2.9 in
Outer Diameter
4.21" (107 mm)
Package Type
Pre-Mounted
Scale
1/7
Search Keywords
felony
Tire Tread
dBoots Hoons
Tire Type
All-terrain
Vehicle Type
On-Road
Wheel Hex Size
17mm
Wheel Position
Rear
Wheel Type
Multi-spoke nylon
ARA311050, Arrma Safe-D8 Mod1 Pinion Gear (30T)
Arrma Safe-D8 Mod1 Pinion Gears feature a "D" shaped hole that allows the motor shaft to key inside the pinion gear, eliminating the loss of drive and brakes if the set screws comes loose. This tough steel Pinion Gear is available in multiple tooth count options, allowing you to fine tune the gear ratio. Use the pull down menu above to pick the pinion gear for your application.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 8mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
(1) Mod1 Safe-D Pinion Gear
(1) Set Screw - 4x4mm
(1) E-Clip - 5.6mm
This product was added to our catalog on December 29, 2022
ARA310994, Arrma Mega/3S BLX Slipper Pad (4)
This is a pack of four replacement Arrma Slipper Pads for the 3S BLX and MEGA 4X4 vehicles.
This product was added to our catalog on March 12, 2021
ARA330551, Arrma Rear Shock Set (2)
This is a replacement Arrma Rear Shock Set, intended for use with the Mega 4x4 and BLX 4x4 models of the BigRock, Granite, Senton and Typhon kits.
Note: Requires either ARA330460 or ARA330539 springs to complete.
Features:
High-quality materials
Supplied assembled without springs
Pre-filled with shock oil
Ready to bolt on to your vehicle after fitting your choice of spring
Spring spacers included for fine-tuning of vehicle ride height
Includes:
(2) Assembled Shock Absorbers
This product was added to our catalog on August 29, 2021
ARA390301, Arrma Mega 570 Brushed Motor (9T)
Arrma Mega 570 Brushed Motor. This replacement motor is intended for the Arrma Infraction Mega 4x4. Package includes one pre-wired motor.
Features:
High-quality 9T 570 size brushed motor has a perfect balance of straight-line pace and low-speed torque
Cool ARRMA decal for eye-catching looks and easy motor recognition
Capable of running on 6-7 cell NiMh or 2S LiPo battery for great flexibility to suit your needs
Supplied fitted with 4mm male bullet connectors and 16awg wire
Internal fan to reduce running temperatures
Flux ring increases motor torque
Specifications:
Mounting Holes: M3 @ 25mm
Shaft Diameter: 3.175mm
Shaft Length: 17mm
Motor Diameter: 38.5mm
Motor Length: 65.0mm
Turns: 9
This product was added to our catalog on March 27, 2021
ARAC9473, AR310816, Arrma 12mm Metal Wheel Hex (4)
Arrma 12mm Metal Wheel Hex Set. These are replacements for the Arrma Granite, Big Rock and Senton 4x4 and 3S BLX models. Package includes four wheel hexes with retaining screws and four cross pins.
Features:
Constructed from high quality aluminum material
Precision manufactured for easy fit to your model
High strength steel pins
Retaining set screws included
Includes:
(4) 12mm Aluminum Wheel Hex
(4) 10 x 2.5mm Pin
(4) M3 x 3mm Set Screw
This product was added to our catalog on September 21, 2021
Arrma Safe-D5 Steel Mod 0.8 Pinion Gears feature a D shaped hole that locks onto the motor shaft and helps to prevent the loss of drive and brakes if the set screw backs out. These gears are machined from steel for durability and fit 5mm motor shafts.
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured wide tooth profile for smooth operation
'D' shaped hole to match motor shaft profile so drive and brakes are not lost if the set-screw backs out
Suits 5mm motor shaft diameter
Precision manufactured threaded set-screw hole
E-clip supplied for motor shaft pinion retention
Includes:
0.8 Module Safe-D Pinion Gear
(1) Set Screw - M4 x 4mm
(1) E-Clip - 3.2mm
This product was added to our catalog on March 23, 2021
ARAC8066, AR330515 Arrma 4x4 Composite Pivot Ball Set
This is a Arrma 4x4 Composite Pivot Ball Set for use with 6S Arrma kits. This high-quality composite pivot ball set provides replacement parts for your kit supplied items.
Features:
Composite material for long-lasting durability and increased impact resistance
Precision manufactured for fast and easy assembly
Includes:
(12) Suspension Link Pivot Ball
(8) Shock Pivot Ball
(2) Steering Link Pivot Ball
This product was added to our catalog on April 10, 2022
ARA310951, 39T MOD1 Spool Gear (8mm Bore)
This 39T Mod1 Spool Gear allows you to fine tune the gearing of your vehicleFeaturesStrong and durable steel for long-lasting performance in extreme RC conditions - Precision manufactured tooth profile for smooth operation - Precision manufactured set screw holes for the fit of screws either side of the spool shaft for extra secure fit - To fit to 8mm diameter shaftIncludes1 x 39T MOD1 SPOOL GEAR (8mm BORE)1 x M4 x 4mm Set Screw1 x M4 Screw Pin
This item was added to our catalog June 3, 2022
ARA310957, Arrma Mojave 6S BLX Front/Rear Differential Set
This is a single replacement Arrma Front/Rear Diff Set, intended for use with the Mojave, Kraton, Notorious, Outcast and Talion BLX kits. This Front or Rear Spiral Cut Diff Set provides a pre-assembled replacement unit for servicing your vehicle.
Features:
Factory assembled and filled with 10k cSt silicone oil for fast and efficient servicing
Tough steel internal gears for long-lasting durability in all conditions
Strong composite diff case
43T spiral cut steel main gear for increased durability under extreme loads
Metal Cross Shafts and inserts for increased efficiency of fit and long-lasting durability
Includes bearings for fast and efficient fit to your vehicle
Includes:
(1) Factory Assembled Front or Rear Diff, 43T Spiral Cut Gear and 10k cSt Silicone Oil
This product was added to our catalog on December 30, 2021
ARAC9493, AR320366 Arrma Wheelie Bar Set
Arrma Kraton 6S BLX
Arrma Notorious 6S BLX
Arrma Outcast 6S BLX
Arrma Typhon 6S BLX
This custom designed Wheelie Bar Set is manufactured from super-tough material for long-lasting durability and performance. The Wheelie Bar Set will help create stability and avoid unwanted back-flips when traveling at high speed.
Features:
Super-tough composite material
Fits to vehicle wing mount
Conveniently supplied assembled and ready to install on your vehicle
Includes:
(1) Pre-assembled wheelie bar per pack
This product was added to our catalog on May 25, 2023
AR390201, Arrma XT90 Male To 4mm 'Banana' Plug Charging Adaptor
This XT90 Male to 4mm 'Banana' Charging Adaptor allows you to charge your XT90 equipped battery back using a charger that has 4mm output sockets.
Features:
XT90 Male connector
2 x 4mm Banana plugs
Supplied pre-assembled for convenience
This product was added to our catalog on May 5, 2021
ARA550094, dBoots Hoons 35/085 2.4 (Gold) Belted 5-Spoke
Arrma DBoots Hoons 35/085 2.4 Belted 5-Spoke Pre-Mounted Tires feature a multi surface tread pattern that delivers great traction in any condition on the Vendetta 3S BLX and Infraction Mega models. These tires are available in multiple rubber compounds, and have been pre-mounted on optional black Arrma 5-spoke wheels with a 14mm hex. The Infraction Mega includes silver compound tires in stock trim, while the Vendetta 3S includes white compound rubber.
Features:
Multi-surface all-road tires for awesome traction in all conditions
Molded-in belt to aid stability at high speeds
Choose from firm silver, medium white or soft gold compound rubber
Pre-glued for trouble-free fit and servicing
Printed side-wall markings for awesome looks and easy identification
5-spoke design wheels for stylish looks and increased strength
Wheels are molded from tough nylon for durability on all surfaces
Black color wheels
14mm Hex for strength
High-quality inserts with excellent support for the tire tread
Specially designed to give the perfect balance of aggressive grip and easy handling characteristics
Specifications:
Inner Wheel bead diameter: 2.68" (68mm)
Outer Wheel bead diameter: 2.4" (61mm)
Width: 1.38" (35mm)
Wheel hex size: 14mm
Overall diameter: 3.35" (85mm)
Includes:
(2) dBoots Hoons All Road 35/085 2.4 Tires mounted to 5-Spoke Wheels
This item was added to our catalog March 28, 2022
ARAC8005, AR713009, Arrma 2.5x16.8mm Pin (4)
This is a replacement pack of four Arrma BLX and Roller 2.5x16.8mm Pins. These high-quality steel Pins are the perfect spare part to keep in your RC tool box.
Features:
Super-tough steel for long-lasting durability and consistent performance
Fits:
Arrma Fireteam 6S BLX
Arrma Kraton 6S BLX
Arrma Outcast 6S BLX
Arrma Typhon 6S BLX
Specifications:
Diameter: 2.5mm
Length: 16.8mm
Includes:
(4) Steel Pins
This product was added to our catalog on July 3, 2021
ARAC4034, AR310459, Arrma 139mm Dogbone (2)
This is a pack of two replacement Arrma 139mm Dogbones.
Compatibility
Arrma Fireteam 6S BLX
Arrma Kraton 6S BLX
Arrma Notorious 6S BLX
Arrma Outcast 6S BLX
This product was added to our catalog on May 1, 2021
ARA310479, Arrma Steel Mod1 Pinion Gear (w/5mm Bore) (18T)
These Arrma Pinion Gears are MOD1 and are offered in a variety of tooth counts. Each package includes one Steel pinion gear and one set screw.
Arrma Kraton 6S BLX
Arrma Mojave 6S BLX
Arrma Nero 6S BLX
Arrma Notorious 6S BLX
Arrma Outcast 6S BLX
Arrma Senton 6S BLX
Arrma Typhon 6S BLX
Features:
Strong and durable steel for long-lasting performance in extreme RC conditions
Precision manufactured tooth profile for smooth operation
Precision manufactured double set screw holes for the fitment of set screws either side of the motor shaft for extra secure fitting
For fitment to 5mm motor shaft
This product was added to our catalog on December 12, 2021
ARA330230, Arrma Composite Ball Cup Set
This is a replacement Arrma Composite Ball Cup Set.
Features:
Super-tough composite material for long-lasting durability in all conditions
Precision manufactured hardware mounting holes for fast and easy installation
Specially designed Body Mount parts for fast and safe body shell fixing
Strong and durable Front Bumper with 'ARRMA' livery for cool looks and increased crash resistance
Includes:
Camber, Steering and Sway Bar Linkage Cups
Front Bumper
Body Shell Mounts
This item was added to our catalog March 3, 2022
ARA330608, HD Shock Rod End and Spring Cup Set (2 Pairs)
Product Details
This Heavy Duty Shock Rod End and Spring Cup Set is precision manufactured from high quality tough composite material.
Features
Durable and tough composite material for long-lasting performance in all conditions - Precision manufactured shock rod ends for safe and secure fit of shock assembly to vehicle suspension - Specially designed spring perch for consistent performance of vehicle's shock absorber springs
Includes
4 x HD Shock Rod End
4 x Spring Cup
This item was added to our catalog March 3, 2022
AR721312, Arrma 3x12mm Button Head Screw (10)
This is a replacement Arrma 3x12mm Button Head Screw set, and is intended to be used with the Arrma Raider, Mojave, Fury, Vortex, Granite and the ADX-10 1/10 scale vehicles.
This product was added to our catalog on April 17, 2021
ARAC5038, AR330193, Arrma Rear Hub Set (2)
Features:
Super-tough composite material for long-lasting durability and increased strength during the most extreme RC action
Precision manufactured hardware holes for secure fitting and easy servicing
Multiple Camber Link positions for fast and easy tuning options in minutes
Fits:
Arrma Felony 6S BLX
Arrma Fireteam 6S BLX
Arrma Infraction 6S BLX
Arrma Infraction V2 6S BLX
Arrma Kraton 6S BLX
Arrma Limitless
Arrma Mojave 6S BLX
Arrma Typhon 6S BLX
This product was added to our catalog on December 1, 2020
