YOKRP-6313W6A, Yokomo 12mm Hex Racing Performer High Traction RWD Drift Wheels (White) (2) (6mm Offset)
These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces.
By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the arm, realizing more stable steering control.
The design which treated the rim part black is 1 inch down size, fits street style bodies.
NOTE: These wheels cannot be mounted on resin/plastic/composite disk wheel hubs of standard drift packages. Please use aluminum clamp type hub hexes
This product was added to our catalog on May 13, 2022
YOKDPP-302V4B, Yokomo DP-302 V4 Drift Steering Gyro
The Yokomo DP-302 V4 Drift Steering Gyro is a super high performance steering gyro that supports a wide range of needs and is perfect for beginners, high-level competitors, and everyone in between. With newly developed circuitry, this gyro offers 4 selectable modes and features the latest high-performance semiconductor chipset and programming. This helps to eliminate any undesired steering shake from gyro operation, helping to detect excessive movement and reducing the chance of unsettling the chassis. This gives the user unparalleled control over almost any surface.
Designed to make fine adjustments a breeze and switch access is massively improved. The aluminum case has a crisp thin design and the beveled edge has been given a luxurious gold anodizing. The quad control system, which is a revolutionary function, is roughly divided into two: “dual gain mode” and “dual gain control”.
In dual gain mode, ASSIST (assist) and NOR (normal) can be switched by the dip switch. In the ASSIST mode, correction of the gyroscope works strongly against driver’s operation and steering inputs. Allowing even total beginners to enjoy RWD drifting with ease. In NOR mode, the driver’s steering operation is prioritized, making it possible for you to counter steer your chassis allowing more control over larger movements of the steering range.
In dual gain control the gain can be adjusted in the range of SOFT and HARD respectively. In SOFT mode it will be easier to obtain initial front grip by suppressing the initial response of the gyro, taking away a little of the punch, making for tighter more controlled transitions. So it will be suitable for driving on smaller low grip tile and carpet track surfaces. In HARD mode, it is set for driving beginners and large-scale track layouts by increasing the initial response of the gyro.
Yokomo has also added an endpoint adjustment button that allows you to set the travel of the servo through the gyro, preventing any unwanted stress on the steering system, reducing power drain and overheating your servo.
This product was added to our catalog on March 15, 2023
YOKZR-DRPA, Yokomo DRPA Competition Drift Tire (4) (for P-Tile)
This is a pack of four Yokomo DRPA Competition Drift Tires for use on P-tile surfaces. This is a solid type competition resin drift tire ideal for P-tile and has been long term tested to ensure consistent traction and sliding characteristics. Previously tires have tended to require a long period of break-in to achieve their optimal grip, but the DRPA provides constant grip right out of the box and maintains stable performance over the long run.
Although it is possible to mount this tire on a general tenth size drift wheel as it is, in case the size is loose, use a tire attachment tape (YOKZR-DRT) between the tire and the wheel.
This product was added to our catalog on January 10, 2023
YOK-YC-5, Yokomo Plastic Parts & Screws Carrying Case (102x157x40mm)
The YC-5 parts case is a relatively small parts box at about 6x4 inches, and is very convenient for storing screws and small parts. Multiple partition plates are included to provide a maximum of 12 compartments, or less, depending on the size of your parts.
Specifications:
Dimensions:
102x157x40mm (4x6.2x1.6")
This product was added to our catalog on December 31, 2021
YOKRP-6313Y6A, Yokomo 12mm Hex Racing Performer High Traction RWD Drift Wheels (Yellow) (2) (6mm Offset)
These are the Yokomo Racing Performer High Traction RWD Drift Wheels, with a 12mm hex and 6mm offset. These high traction type RP wheels are freshly designed, pursuing to the limit of traction and tracking ability on low grip road surfaces.
By maintaining high circularity accuracy and giving it moderate flexibility, it induces "deflection" during throttle operation, greatly improving traction performance. The rib on the back side of the wheel is also a bold cut, reducing interference with the arm, realizing more stable steering control.
The design which treated the rim part black is 1 inch down size, fits street style bodies.
NOTE: These wheels cannot be mounted on resin/plastic/composite disk wheel hubs of standard drift packages. Please use aluminum clamp type hub hexes.
This product was added to our catalog on May 13, 2022
YOKSD-GRA90BA, Yokomo PANDEM GR Supra Drift Body Set (Clear)
The Yokomo PANDEM GR Supra Drift Body Set faithfully replicates the aggressive silhouette of a modified GR Supra. By taking the incredibly refined GR Supra platform, and adding the PANDEM aero body kit, this body is a testament to Yokomo's desire to stay on the cutting edge of the drift market. Yokomo's original molding technology faithfully molds the PANDEM aero kit with the front grille, rear underskirt, and deep side constrictions in one single piece - making it easy to add a custom wide body look to your drift build. The attractive lines of the beautifully curved Supra, combined with the accurate addition of the PANDEM body kit gives this body a realistic finish that you wouldn't expect from a RC car body.
NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.
This product was added to our catalog on June 1, 2023
YOKDP-YD2RTR-1, Yokomo YD-2 1/10 2WD RTR Drift Car w/Supra Body (Red or White)
The Yokomo YD-2 1/10 2WD RTR Drift Car with Supra Body offers the prowess of the RWD YD-2 chassis in a ready to run option. The YD-2 chassis has quickly become a preferred chassis in the drift world and now comes in this pre-built form giving both beginners and experts an easy entry into drifting. Utilizing more than 90% of the same parts used on the YD-2Z platform offers the user an abundance of compatible option parts and upgrades. Featuring fine tuned steering geometry gives incredible steering angles and consistent handling characteristics with the use of 4-wheel independent suspension. Complementing this competitive chassis is a powerful 27-turn motor, a reliable 2.4ghz radio system and a precision steering gyro. With reliable performance out of the box and compatibility with most replacement and optional parts for the YD-2Z chassis this Yokomo 1/10 2WD RTR Drift Car kit offers an unsurpassed value.
Features:
Pre-Built RTR (Ready to Run) vehicle
Upgradable chassis based on the latest model YD-2Z
2.4GHz radio system
27-turn motor for drifting
Equipped with steering gyro
Nickel-metal hydride 1600mAh battery
AC quick charger
PANDEM GR Supra Painted body
Drift exclusive tires & wheels
Needed to Complete:
(4) AA Batteries for the Transmitter
This product was added to our catalog on May 29, 2023
The YC-9 parts case is a med-large box with a shallow bottom best suited for hardware, parts and 540 sized motors. The YC-9 features four compartment rows, with each row being able to divide into 7 compartments.
Specifications:Dimensions: 193x286x46mm (7.6x11.3x1.8")
This product was added to our catalog on September 18, 2017
YOKZR-DRC, Yokomo DRC Competition Drift Tire (4) (for Carpet Surface)
This is a pack of four Yokomo DRA Competition Drift Tires for use on Carpet surfaces. This is a solid type competition resin drift tire DRC. It is the optimum compound for carpet surface and features an updated design of tire thickness, tread shape and sidewall shape.
Although it is possible to mount this tire on a general tenth size drift wheel as it is, in case the size is loose, use a tire attachment tape (YOKZR-DRT) between the tire and the wheel.
This product was added to our catalog on August 22, 2021
YOKBL-RPX2DB, Yokomo RPX-II Drift Spec Brushless ESC Speed Controller
The Yokomo RPX-II Drift Spec Brushless Speed Controller represents the premium in ESC technology. Starting with high quality components such as a low resistance power supply and specialized FETs, Team Yokomo has created one of the most stable and powerful ESC's on the market. Optimized for driving performance it features in depth tuning options to adjust to a variety of track conditions and driver preferences.
This "Drift Spec" ESC is best suited for 2wd and 4wd 1/10 drift platforms and has been specifically tuned for drifting applications. Smooth throttle control and a multitude of power adjustments makes this ESC one of the best drift oriented options.
Changing the program settings can be done with the Yokomo Brushless Programmer (YOKBL-RPXP2), sold separately. The ESC can also be remotely programmed using the smartphone application and Yokomo WiFi Module (YOKBL-WMA).
Features:
Dedicated sensored brushless controller
Programmable with YOKBL-WMA Wi-Fi module or YOKBL-RPXP2 Programmer
49 Individual ESC programming parameters
A multitude of boost and turbo adjustments
Advanced brake adjustments
Full aluminum case with cooling vent & high power 30mm cooling fan
Specifications:
Motor Type: Sensored Brushless
Motor Limit: 3.0T (specification when using the fan)
Operating Voltage: 3.7-7.4V
Forward/Brake/Reverse: Yes
Full Aluminum Case/Heatsink: Yes
Typ. Voltage Drop @20A per Phase: 0.048V
Rated Current per Phase: 249A
Plugged 30x30x10mm Fan: optional
BEC Output: 6V/7.4V 6A Linear Continuous Current
BEC Output Short Protection: Yes
"Boost 0" Mode: Yes
Multi-frequency system: Yes
Power Wires: 12 AWG
Case Size: 32.9x34.6x19.6mm (without fan)
Weight: 44g (without cables and fan)
This product was added to our catalog on September 5, 2023
YOKSDR-020, Yokomo SD 2.0 Super Drift 1/10 Electric RWD Drift Car Kit
The Yokomo SD 2.0 Super Drift 1/10 2WD RWD Drift Car Kit is welcomed into the drifting world with high expectations, with enough tuning capabilities to get lost in, this chassis is great for novice to adept level drivers. The SD 2.0 has been designed to dominate, whether you are leading or chasing this chassis will have you dragging bumper, flowing like water, and is sure to have you spinning brodies around the competition.
The Yokomo SD 2.0 was designed to be one of the most customizable platforms out there the SD 2.0 lets you tune to your heart's desire. With a wide range of adjustability, this RWD platform offers the ability to make changes to suit changing track conditions or driver preferences. Using an updated two piece carbon main chassis the SD 2.0 includes two gearbox options, one three gear and one four gear. These two gearbox options change the direction of the motor allowing for different on-power throttle feel and traction. Additionally included are aluminum oil filled shocks, lightened slide rack steering setup with updated steering knuckles for an overwhelming cutting angle, aluminum shock towers, and updated high traction rear hubs giving the SD 2.0 premium high quality chassis components for precision driving feel and durability. If you are looking for a high quality, highly adjustable 2WD drift platform then look no further, the Yokomo SD 2.0 super drift RWD drift car is the kit for you!
NOTE: Finished kit shown in photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model.
Features:
Updated steering blocks for overwhelming cutting angles
Variable transmission with selectable 4 or 3 gears
Differential height adjustments
Rear bias servo mount
Aluminum rear bulkhead
Lightweight slide rack
High traction rear hubs
Split rear chassis
Lightweight resin front bulkhead
30:70 weight distribution
Specifications:
Scale: 1/10
Length: 16.7in (425mm)
Width: 7.7in (198mm)
Wheelbase: 10in (256mm)
Approximate Weight: 52.9oz (1500g)
Drive: RWD
Power Source: Electric
Gear Ratio: 1:2.6
Assembly Level: Kit
Includes:
(1) Yokomo SD 2.0 Super Drift 1/10 Electric RWD Drift Car Kit
Needed to Complete:
(1) 2-3 Channel radio system
(1) Electronic Speed Control
(1) 540 Motor
(1) Steering Servo
(1) Drift Gyro
(1) 2S (7.4V) LiPo battery
(1) Compatible Battery Charger
(1) Drift tires & Wheels
(1) 200mm TC or Drift body
(1) Polycarbonate paint for body
Tools for assembly
This product was added to our catalog on July 17, 2023
YOKY4-016A, Yokomo Front/Rear Body Mount Set
This is a replacement Yokomo Front/Rear Body Mount Set.
This product was added to our catalog on June 1, 2023
This is a twelve pack of Yokomo YC-1 Parts Cases. These compact part cases feature a width of 87mm and are convenient to store small bits. These cases feature up to 6 compartments when using the partition plates.
Specifications:Dimensions: 59x87x22mm (2.3x3.4x0.9 inches)
This product was added to our catalog on September 18, 2017
The Yokomo YC-11 Parts Case combines the YC-11, four YC-3 and three YC-10 cases into one single purchase item that is perfect to suit the needs of every OCD enthusiast!
The YC-11 case measures in at 255x190mm making it compact and easy to store, while the 60mm depth allows you to store larger items like tools, batteries and motors. It is a variable type compartment with 8 partition boards (front side 4, back side 4), with a tough single latch closure system.
The YC-3 Parts Cases measure in at 176x36x26mm and feature 8 compartments with slip lock closures, and is perfect hardware and other small parts. Each compartment measures 20x20mm and features a radius edge that makes it easy to slide small parts out of the compartment.
The YC-10 Parts Cases measure 90x70x17mm and are a great option to store small screws, shims and other bits. These cases also have a radius bottom edge for easy small parts removal.
This product was added to our catalog on September 29, 2017
The Yokomo YC-1134 Parts Case combines the YC-11, four YC-3 and three YC-10 cases into one single purchase item that is perfect to suit the needs of every OCD enthusiast!
The YC-11 case measures in at 255x190mm making it compact and easy to store, while the 60mm depth allows you to store larger items like tools, batteries and motors. It is a variable type compartment with 8 partition boards (front side 4, back side 4), with a tough single latch closure system.
The YC-3 Parts Cases measure in at 176x36x26mm and feature 8 compartments with slip lock closures, and is perfect hardware and other small parts. Each compartment measures 20x20mm and features a radius edge that makes it easy to slide small parts out of the compartment.
The YC-10 Parts Cases measure 90x70x17mm and are a great option to store small screws, shims and other bits. These cases also have a radius bottom edge for easy small parts removal.
This product was added to our catalog on September 29, 2017
YOKBL-WMB, Yokomo WiFi Brushless ESC Speed Control Programmer
This is the Yokomo WiFi Brushless ESC Speed Control Programmer. A Wi-Fi module makes Yokomo‘s latest BL-PRO4 / RS4 / SP4 ESC series more easily programmable! Connect the WiFi Module to the ESC programmer connection connector, perform Wi-Fi connection with the smartphone, and rewrite the ESC with the application installed on the smartphone. If you leave the BL-WM on the machine, you can change the setting at any time as long as the motor is not rotating.
Of course, because it is a wireless connection, even while driving on a circuit, you can stop using the pit road once and rewrite the setting directly from the control panel. In addition, since it has a telemetry function that can check live current / voltage value and rotation speed while driving, mechanics can also monitor the driving situation on the course side. Since traveling data is stored as a log, it can be used as information to set a better program by checking after running.
Specifications:Compatible ESCs: BL-PRO4 (N/B), BL-RS4, BL-SP4Case size: 25×25×9mmWeight: Approx 7g*WiFi connection may be interrupted depending on usage environment. Please note.*It may be prohibited by your local race rules to install the Wi-Fi module while driving; please follow your local circuit rules.
This product was added to our catalog on October 26, 2023
The Yokomo Drift Performance DX1 "R" Brushless Motor is great for asphalt, carpet or any other high grip surface. This motor was designed to have good low end torque that smoothly rolls to the high rpm band. The cutouts in this motor look great and help keep the motor cool. Package includes one brushless motor.
Features:
Suitable for asphalt and carpet
High rotation - ideal for high-grip road surfaces
Latest stator and coil for smooth rotation
Specifications:
Turn: 10.5T
This product was added to our catalog on September 5, 2023
YOKDP-YD2RTR-2, Yokomo YD-2Z 1/10 RWD RTR Electric Drift Car w/Supra Body (Red or White)
Yokomo YD-2Z RWD RTR Drift Car with Supra Body
Yokomo YD-2Z 1/10 2WD Ready-To-Run Drift Car with Supra Body. Designed to be a great budget and a beginner friendly option, making it the perfect platform for new hobbyists to get in drifting without sacrificing performance and can always upgrade their car as their skills grow! Based on the latest proven RWD drift YD-2Z platform with 90% or more of the parts being used in this car with plenty of optional replacement parts and performance upgrades already available! In addition, the aftermarket support for Yokomo drift platforms is second to none!
Featuring fine tuned steering geometry that provides incredible steering angles and consistent handling characteristics with the use of 4-wheel independent suspension. Complementing this competitive chassis is a powerful 27-turn motor, a reliable 2.4ghz radio system and a precision steering gyro. With reliable performance out of the box and compatibility with most replacement and optional parts for the YD-2Z chassis, this Yokomo 1/10 2WD RTR Drift Car kit offers unmatched value!
Features:
Pre-Built RTR (Ready to Run) vehicle
Upgradable chassis based on the latest model YD-2Z
2.4GHz radio system
27-turn motor for drifting
Equipped with steering gyro
Nickel-metal hydride 1600mAh battery
AC quick charger
PANDEM GR Supra Painted body
Drift exclusive tires & wheels
Specifications:
Scale: 1/10
Completion Level: Fully assembled and ready-to-run
Power Plant: Electric
Motor: 27-Turn Brushed
ESC: Brushed
Length: 425mm
Width: 198mm
Height: 256mm
Weight: 1500g
Gear Ratio: 1:2.6
Includes:
(1) YD-2Z 1/10 RWD RTR Electric Drift Car with Supra Body
(1) 2.4GHz Transmitter and Receiver
(1) 1800mAh Ni-MH Battery
(1) Battery Charger
(1) User Manual
Needed to Complete:
(4) AA Batteries for the Transmitter
This product was added to our catalog on July 20, 2023
