Redcat Lightning EPX Drift 1/10 RTR 4WD Touring Car
The Redcat 1/10 RTR 4WD Lightning EPX Drift Kit features a combination of 27T 540 brushed motor and drift specific RC tires that allow the Lightning EPX Drift to slide effortlessly around corners, while maintaining a steady forward momentum. Its lightweight plastic chassis allows for quick drift recovery and almost effortless changes in direction. A forward and reverse ESC allow the Lightning EPX Drift to back out of trouble while the 2.4GHz radio system provides reliable control for maneuvering multiple corners in a matter of seconds. The Lightning EPX Drift’s aluminum capped oil filled shocks with selectable mounting positions, tunable 4-wheel independent suspension, adjustable ride height, adjustable toe angle, and adjustable camber angle allow drivers to tune for any track and driving style. Ready to run, the Lightning EPX Drift includes a rechargeable battery pack, battery charger, and 2.4GHz radio system.
Features:
1/10 scale drift car, Scale drift tires, 5-Star rims, Independent suspension, Lightweight plastic chassis w/ aluminum top plate, Oil filled shocks, Bearings throughout.
Tunable suspension, Adjustable ride height, Adjustable toe angle, Adjustable camber angle, Tunable shocks, Selectable shock positions.
Realistic drift car body, Hard drift tires, Shaft driven 4 Wheel drive.
19T RC550 Brushed Electric Motor, 40a Waterproof ESC, Powerful steering servo, 2.4GHz radio.
Assembled & Ready to Run - Includes 7.2V 2000mAh NIMH rechargeable battery with NiMH battery charger - Requires AA Batteries for transmitter.
Specifications:
Vehicle Scale: 1/10
Servo Type: Qty 1 Hi-Torque Servo for Steering
Radio System: 2.4GHz Radio System
Transmission: Forward and Reverse
Wheelbase: 260mm
Battery: 7.2v 2000mAh NiMh & Charger Included
Length: 360mm
Ground Clearance: 4.5mm
Needed to Run: 8 AA Batteries for Remote Control
Width: 200mm
Chassis Type: Plastic
Height: 112mm
Speed Control Type: 40a Brushed Waterproof ESC
Includes:
7.2V 2000mAh NIMH rechargeable battery
NiMH battery charger
Needed to Complete:
AA batteries for transmitter
This product was added to our catalog on March 23, 2021
Hexfly C6D Mini LiPo/NIMH Charger Hexfly HX-c6d mini AC Balance Charger. This is a rapid charger/discharger with a built in balancer, microprocessor and advanced operating software
Operating Voltage Range: AC100.0-240.0 Volt
Circuit Power: Max .60W for charging, Max .10W for discharging
Charge Current Range: 0.1~6.0A
Discharge Current Range: 0.1~2.0A
Current Drain for balancing Li-Po: 300mAh/cell
NiCd/NiMh battery cell count: 6-8S
Lithium Battery cell count: 2-4S
Pb battery voltage: 6V(3P)-12V(6P)
Weight: 302g
Dimensions: 115x112x55mm
This product was added to our catalog on January 2, 2022
PRODUCT FEATURES
The Redcat Volcano EPX Pro 1:10 scale RTR Monster Truck gets a makeover, with a new body, wheels and tires. Vehicle battery and charger are sold separately.
Fast and powerful, the Volcano EPX Pro is ready to run (battery & charger not included) and includes a 3300KV RC540 brushless electric motor, waterproof 60A electronic speed controller (ESC), powerful 6Kg steering servo, and our proven 2.4GHz radio system. Add your own battery charger or we recommend the Hexfly 5800 MAh 7.4V LiPo battery pack and the Hexfly HX-403 LiPO balance charger are a perfect fit.
The Volcano EPX pro uses a lightweight and durable molded plastic chassis with an aluminum upper brace plate for added rigidity. Low center of gravity gives the Volcano EPX Pro nimble handling while maintaining that aggressive monster truck look we all love. The Volcano EPX Pro’s rugged looking body includes hard plastic skid plates on the roof and rear spoiler. These hard plastic components not only add protection from rollovers and crashes, they also look amazing. Large white Redcat lettering rides inside each of the Volcano EPX Pro’s sporty looking 10-spoke wheels to set off the appearance of this incredible looking monster truck.
The Volcano EPX Pro is fully adjustable and upgradable. A total of eight aluminum threaded body oil filled shocks are easily adjusted by twisting the spring tension collars and are completely tunable with aftermarket shock oils, pistons, and/or springs. The included dual-rate springs are designed to offer superior handling over small bumps and large jumps alike. There are also several upper and lower shock mounting positions for dialing in performance even further. Tunable metal gear sealed differentials, four wheel independent suspension, adjustable metal turnbuckles, and aggressive monster truck tires allow the driver to get loads of traction on many different surfaces while a complete set of bearings provide smooth and reliable power delivery.
The adjustable metal turnbuckles allow the driver to fine tune camber and toe angle for the very best performance handling on any surface or race track. The Volcano EPX Pro monster truck is a fully tunable hobby grade RC monster truck and comes pre-tuned for most driving situations.
The Volcano EPX Pro is among the best selling RTR monster trucks of all time for a reason. Not only is it exciting to drive and really fast, the Volcano EPX Pro has huge parts support with many available custom aftermarket parts, including color anodized machined aluminum parts, as well as a large selection of other performance options.
The Volcano EPX Pro, with brushless power system and 2.4GHz radio, is erupting with excitement. Pull the throttle and get your adrenaline flowing with this 1:10 scale, 4WD, RTR brushless monster truck. Buy yours today! Battery and charger not included.
• 4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, (8) Aluminum body oil filled shocks, front and rear gear differentials, Bearings Throughout.
• Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle.
• Aggressive tires, Independent suspension, Low center of gravity chassis for high speed performance, Ball bearings throughout.
• 3300KV RC540 Brushless Electric Motor, Waterproof 60A ESC, Waterproof high torque steering servo, 2.4GHz radio system.
• Assembled & Ready to Run - Requires LiPO Battery, LiPO safe Battery charger, and 4-AA Batteries for Transmitter.
Lightning STK 1/10 Scale Electric
PRODUCT FEATURES
If you're into Stock Car racing, you'll love the Redcat Racing Lightning STK! Designed to look and handle like a full sized Stock Car, the Lightning STK is a blast to drive. Get some of your friends together and create a Stock Car race series of your own.
Become your own crew chief with the Lightning STK's fully tunable independent suspension, tunable oil filled shocks, multiple shock positions, adjustable camber, adjustable toe angle, adjustable chassis clearance, adjustable body height, and tunable gear differentials. Add a rear wing and scale on road racing tires to all that tunability, and you've got a highly capable race car that can help prepare you for track tuning full sized race cars.
Adjust suspension preload on the aluminum capped oil filled shocks, using the included preload collars, or completely change spring tension and stiffness by installing after market springs. Varying weight aftermarket shock oils can also be used for a large array of shock dampening options. The Lightning STK also has a large selection of performance parts available, including those machined from high quality aluminum.
Ready to run, the Lightning STK includes a 19T RC550 brushed electric motor, 40a waterproof ESC, precision steering servo, 2.4GHz radio system, 7.2v 2000mAh NiMH rechargeable battery, and a NiMH battery charger.
The forward and reverse electronic speed controller allows the Lightning STK to back out of pile ups in turn four, while the 2.4GHz precision radio system allows you to weave in and out of lap traffic with complete control.
Get your Lightning STK today and take home the checkered flag!
1/10 scale on road race car, Shaft driven 4 wheel drive, Independent suspension, Lightweight plastic chassis w/ aluminum top plate, Oil filled shocks, Front and rear gear differentials, Ball bearings throughout.
Tunable suspension, Adjustable ride height, Adjustable toe angle, Adjustable camber angle, Tunable shocks, Selectable shock positions, Tunable gear differentials.
Detailed Stock Car body, Molded plastic rear wing, Realistic tires w/ high speed dish wheels
19T RC550 brushed electric motor, 40a Waterproof ESC, Precision steering servo, 2.4GHz radio system.
RER06398, Redcat 7.4V 5800mAh 2S 30C LiPo: HXT4 Banana Connector
Specifications:
Connector Type Banana
Battery Voltage 7.4V
This product was added to our catalog on March 27, 2021
BS205-011, RER04389, Road Wheels, Chrome
Quantity Included - 2
Hex Size - 12mm
Pre Glued - Yes
Rim Color - Chrome
Overall Width - 26mm
Overall Diameter - 64mm
Offset - 15mm
This product was added to our catalog on December 16, 2021
RER1704, Redcat RDS 1/10 2WD Ready to Run Brushless Drift Car
We’ve been banging on the doors of the competition with the RDS 1:10 scale brushless electric 2WD competition Spec drift car.The RDS is ready to run and includes all the necessary radio gear and electronics to get you on the track quickly. Since battery size and weight are a tuning preference, the RDS does not include a battery or charger. The RDS will accept a competition style 2S shorty LiPo pack, LCG 2S shorty pack, or a standard sized 2S stick pack.
We’ve engineered the RDS from the ground up, for a specific purpose, to compete. The RDS is a highly competitive rear wheel drive drift car that excels on surfaces which are found on many prepared RC drift tracks, such as carpet, p-tile, and polished concrete. The RDS can also be used on unpolished concrete and asphalt, though you may not get to experience its full potential on these rougher surfaces.
The RDS is ready to run and includes a 2.4GHz radio system, 540 3300kv brushless motor, 60A brushless ESC, coreless digital Hexfly Drift-Spec steering servo and a drift specific gyro. Gyros are a necessity on rear wheel drive drift cars as they allow the driver to achieve true-to-scale door to door drift action. The included Hexfly GX-1 gyro automatically countersteers the car, enabling it to maintain a smooth arc through drifts. The amount of automatic countersteer can be fine tuned by adjusting the amount of gain on the gyro.
Competitive drifting is based on line, angle, and style. How close someone is to the ideal line, having maximum angle throughout the run, moving through the course quickly and having minimal corrections after committing to an angle are what judges look for. While this is mostly achieved by skill, it is also necessary to have a predictable drift car that is adjustable to your driving style. The RDS excels in this area with its lightweight carbon fiber based chassis and adjustability. Everything on the RDS is adjustable to suit the driver’s needs, including camber, caster, toe, ackerman, roll center, wheelbase and center of gravity. The motor plate can be mounted in three different positions, altering the car’s chassis roll and weight bias. This can be used to adjust the amount of traction and chassis roll the RDS has on different surfaces. Being able to fine tune ackerman is important in drifting as it directly affects corner speed. The RDS has multiple steering link positions and a sliding ackerman plate, making it easy to fine tune ackerman. The RDS is loaded with tuning capabilities that will suit even the most advanced drivers.
The included RDS body not only looks amazing, but it is ready to accept an LED light kit. LED light kits are sold separately. The RDS has front and rear light buckets that are ready to accept four LED lights in the rear and two up front. Whether it’s day or night, the RDS looks trick.
While the RDS is an advanced competition spec drift car, it is also a perfect choice for beginners and is already set up out of the box for polished concrete and p-tile surfaces. This means someone learning to drift can open up the RDS and start practicing with the factory settings. We are releasing several how-to videos that include beginner drifting, advanced drift techniques, initial vehicle setup, advanced chassis tuning and understanding how drift competitions work.
These videos are hosted by a seasoned drifter who owns and operates one of the largest drift tracks in the US. He will share his wealth of drifting knowledge to help you become more confident and competitive with your new RDS competition spec drift car, regardless of your current skill level. Whether you’re a novice or a pro, check out the all new RDS competition spec rear wheel drive drift car today.
Specifications
• RDS: Fully Assembled with Electronics and Radio Gear
• Electronics: 540 3300kv Brushless Motor / 60A Brushless ESC / GX-1 Drift Gyro
• Steering Servo: Hexfly Coreless Drift-Spec Digital Servo.
• Radio: 2.4GHz radio system
• Chassis: Carbon Fiber Upper and Lower Deck
• Drive System: 2-Wheel-Drive
• Transmission: Single-Speed with 3 Motor Positions For Adjusting CG & Weight Bias
• Length: 445mm Stock
• Wheelbase: 253mm - 261mm Adjustable, Stock is 257mm
• Suspension: 4 Coil Over Shocks / Sliding Adjustable Ackerman
• Wheels: 6-Spoke Rims with Scale Wheel Nut Covers
Needed to Complete
• 4 AA Batteries for Transmitter
• Battery and Charger for vehicle
NOTE:
The depicted decals and battery shown in the photo are for illustrative purposes only. The RDS you receive will require the decals to be added. The battery is sold separately.
Redcat recommends the user checks the steering endpoints through the drift gyro prior to use. Please check with the user manual to perform this.
This product was added to our catalog on February 10, 2023
PRODUCT FEATURES
90mm Front/Rear Dog Bones (2pcs)
Primarily used in Volcano EPX/EPX Pro series from differential to the wheels.
Specifications:
90mm End to End
84mm Pin to Pin
RER03656, Redcat Tamiya to Banana 4.0 Plug Adapter (Male Tamiya to Female Banana)
Redcat Racing Male Tamiya to Female Banana 4.0 Connector Adapter. This adapter will allow you to use a battery pack with a Tamiya Style connector on your Redcat model that is equipped with Banana 4.0 connectors.
This product was added to our catalog on December 15, 2021
PRODUCT FEATURES
Are you ready for Car crushing, dirt slinging, Monster Truck action? Then you’re ready for the very first 1:10th scale solid-axle RTR RC monster truck that ever hit the RC market, the Ground Pounder!
Developed, prototyped and tested by Crawford Performance Engineering, the Ground Pounder is truly an RC marvel.
With a beautifully styled body, aluminum “tube style” frame, mid motor shaft driven 4WD, solid axles, four link suspension, and aluminum threaded body oil filled coil-over shocks, you won’t know whether to display the Ground Pounder on a shelf or get it dirty in the yard. This 1:10th scale monster truck was designed to look and perform like the real thing.
A powerful brushed 540 electric motor is mounted mid frame, for even weight distribution, just like the full scale monster trucks. Forward and reverse are possible through the brushed ESC, though you may find yourself just driving over everything in its path. Ready to run, the Ground Pounder monster truck includes a rechargeable NiMH battery pack, NiMH charger, and 2.4GHz 3-channel radio.
4-mode 4 wheel steering allows you to have control of the front wheels, as well as the rear wheels, just like a full size monster truck! Cycling through all four of the steering modes is as easy as pushing a button. The 4-mode steering button is conveniently located on the transmitter handle, where your thumb rests. Quickly cycle through “front steer”, “rear steer”, “front and rear steer”, and “crab steer” modes, just like the full size monster trucks!
If you like monster trucks, you’ll love the ground pounder! Get your Ground Pounder 1/10 scale monster truck today!
Shaft driven monster truck, Solid axle 4 Wheel drive, 4 link suspension, 4-mode 4 Wheel steering, 2 Steering servos, 3-channel 2.4GHz radio, Aluminum "tube style" chassis, Oil filled shocks, Ball bearings throughout.
Tunable suspension, Adjustable ride height, Adjustable toe angle, Adjustable suspension links, Tunable shocks, Selectable shock positions, 4 Selectable steering modes.
Realistic body modeled after the real Ground Pounder monster truck, Big monster truck tires, Realistic looking monster truck chassis.
20T RC540 Brushed electric motor, Waterproof 40a brushed ESC, 2x Powerful steering servos, 3-channel 2.4GHz pistol grip radio.
Assembled & Ready to Run - Includes 7.2V 2000mAh NiMH rechargeable battery and NiMH battery charger - Requires AA Batteries for transmitter.
HWI38010801, Hobbywing EZRun MAX6 V3 Sensorless Brushless ESC & Motor Combo w/4985SL (1650kV)
The Hobbywing EZRun MAX6 V3 Sensorless Brushless ESC & Motor Combo includes the 4985SL 1/7 scale, 1650kV motor and is a great option for high-end, aggressively powered 3S - 6S builds.
Specifications:
Motor:
Model: 4985SL-1650KV
Pole: 4
KV (No-load): 1650KV
Resistance: 0.0053 Ω
Current (No-load): 5.4 A
Max. Output Power: 5700 W
Current at the point of M.O.P: 160 A
Motor Diamter: 49mm
Motor Length: 86.5mm
Shaft Diameter: 5.0mm
Shaft Length: 21.5mm
LiPo Cells: 3-6
Weight: 587g (20.71oz)
Applications: 1/6th & 1/7th RC Vehicles
ESC:
Continuous Current: 160A Peak Current:
Peak Current:
Peak Current: 1,050A
Motor Type: Sensorless Brushless Motor
Applications: 1/6th Touring Car, Buggy, Truggy and Truck
Motor Limit: With 6S LiPo/18S NiMH: KV ≤1500 (5892 size motor); With 8S LiPo/24S NiMH: KV ≤1200 (5892 size motor)
LiPo/NiMH Cells: 9-24S NiMH, 3-8S LiPo
BEC Output: 6V/7.2V Switchable, Continuous Current of 6A (Switch-mode BEC)
Cooling Fan: Powered by the stable BEC voltage of 6V/7.2V
Connectors: Input End: None, Output End: Female 6.5mm Gold Connectors (pre-soldered onto the PCB of the speed controller)
Size (LxWxH): 70x56x46.5mm
Weight: 240g
Programming Port: FAN /PRG Port
This product was added to our catalog on April 21, 2021
PRODUCT FEATURES
2S Hardcase LiPo (7.4V/5800mah) 30C Battery w/ Deans Connector
Recommended charge rate: 1C(1xCapacity) or 5.8ampsFull Charge will read 8.4 volts, Do not store fully charged.Number of cells: 2 cell
Connector: Deans/T-Plug
Dimensions: 139x47x25.3mm
PRODUCT FEATURES
Owners Manual
There are many fellow RC enthusiasts running their 1/10 scale vehicles at the local RC park. Dropping the large scale Rampage MT V3 to the ground, you fill its 700cc gas tank with pre-mixed unleaded gasoline/oil. You prepare the MT V3 for its starting sequence by pushing the primer bulb a few times and rotating the choke lever. A tug of the starter cord brings the monstrous 32cc 2-Stroke gasoline engine to life. An angry growl bellows through the surrounding trees as the Rampage MT V3 exhales through its rear facing exhaust. The other RC vehicles roll to a halt, as their drivers peer in your direction. You burp the throttle as if the beast is taunting its prey. Anticipation builds as you get ready to unleash the Rampage!
Like cockroaches, RC vehicles scatter to the field's edge, with their drivers paying full attention to what is about to unfold in front of their eyes. With a brisk stab of the throttle, the Rampage MT V3 claws at the dirt beneath, throwing it rearward. The MT V3 launches itself forward with a loud thunderous roar. You have officially gained the full attention of everyone within hearing distance. The Rampage MT V3 is a sight to see.
The Rampage MT V3 is both fast and powerful. Large scale aluminum bodied oil filled shocks, coupled with 4-wheel independent suspension, add a degree of prowess to the MT's otherwise aggressive display of dominance. The 32cc gasoline engine sends huge amounts of power to its reliable, shaft driven, 4-wheel drive drivetrain. Everything on the Rampage MT V3 is gigantic, including its tunable sealed gear differentials, beefy steel drive cups, and large diameter drive shafts. The 4mm Aluminum 6061T6 chassis is the backbone of the MT. Front and rear aluminum braces provide the extra strength that a vehicle of this sheer size demands.
Even though the Rampage MT V3 is an extremely big vehicle, it is also a great performer. With adjustable camber, adjustable brake linkage, adjustable ride height, tunable suspension, selectable shock positions, and adjustable toe angle, the Rampage MT V3 has many tuning options and is a great choice for anyone who wants to step up in the RC food chain.
The Rampage MT V3 is currently one of the largest vehicles Redcat has to offer, but it doesn't rely solely on its impressive size and scary power to turn heads. With an inner roll cage, detailed monster truck body, and massive monster truck tires mounted to functional bead-lock rims, the Rampage MT V3 is as impressive to look at as it is to drive.
As the other RC drivers are still staring with complete wonder, you continue to peg the throttle, putting on a very impressive display of power and authority. The large 1/5 scale Rampage MT V3 monster truck is now hurling dirt in every direction, like a crazed beast frantically searching for underground prey. The Rampage MT dwarfs 1/10 scale vehicles.
A 2.4GHz radio system commands precision from dual large scale steering servos and metal gear throttle/brake servo, which allows the driver to remain in control while drool continues to collect at the feet of onlookers.
As you near the end of your run, you engage the dual disc brake system and drive the Rampage MT V3 back to its starting position. Still in awe, spectators slowly pick up their jaws and begin to process what they've just witnessed.
As your body trembles with excitement, you realize that you may have just experienced the single most exciting thing of your entire life. Looking out among the other fellow RC enthusiasts, who are now dreaming of owning a Rampage MT V3 for themselves, you shout, "You've just witnessed the Rampage!"
Get the Rampage MT V3 1/5 scale monster truck today, and experience the power of the Rampage for yourself!
Powerful 2-stroke gas engine, Pull start, Large capacity fuel tank, Threaded aluminum body oil filled shocks, 4mm 6061 T6 Aluminum chassis, Front and rear gear differentials, Dual steering servos, Ball bearings throughout.
Easily tuned engine w/ choke, Tunable centrifugal clutch, Adjustable brake linkage, Adjustable ride height, Tunable suspension, Multiple shock locations, Adjustable toe angle, Adjustable camber.
Huge monster truck tires, Bead lock rims, Machined aluminum shock towers, Machined aluminum chassis braces, Enclosed battery box, Inner roll cage, Shaft driven durability
Powerful 32cc 2-Stroke Gasoline Engine, High torque throttle/brake servo, Dual high torque 1/5 scale steering servos, 2.4GHz radio system.
Assembled & Almost Ready to Run - Requires Unleaded Gasoline (must be mixed with 2-stroke oil), 2-Stroke Oil, Air Filter Oil, AA Batteries for Transmitter
Product Specifications
Approximate Assembly Time
No assembly required
Battery
Included
Brakes
Dual Disc
Charger
Included
Chassis
4mm Aluminum 6061T6
Completion Level
Ready-To-Run
Drivetrain
4WD
Engine Size
Gas 32cc HY 2 Stroke
Fuel Tank Capacity
23.67 oz (700cc)
Power Type
Gas
Gear Ratio
7.78:1
Ground Clearance
2.8 in (72mm)
Product Height
13.8 in (350mm)
Product Length
29.1 in (740mm)
Product Weight
33.4lbs (15.2Kg) Dry
Product Width
23.6 in (600mm)
Radio
Included
Receiver
Included
Scale
1/5
Servos
2 Hi-Torque Servos for Steering and Throttle
Shock Type
Aluminum Body Oil Filled
Speed Control
Included
Vehicle Type
Monster Truck
Water-Resistant
Yes
Wheelbase
20.3 in (516mm)
BS204-010, RER08190, 1/10th Drift Wheel and Tire (Black Chrome) (1pr)
Quantity Included - 2
Hex Size - 12mm
Pre Glued - Yes
Rim Color - Black
Overall Width - 25mm
Overall Diameter - 61mm
Offset - 15mm
This product was added to our catalog on December 16, 2021
RED04003, Center Drive Shaft (Purple) (1pc)
Aluminum Drive Shaft primarily used in Volcano and Tornado EPX/EPX PRO as well as Dukono.
Specifications:
171.5mm End to End
166.5mm Pin to Pin
PRODUCT FEATURES
Plastic Front Steering Knuckles L/R (1pr)Plastic Front Steering Knuckles L/R (1pr)
Includes 1 Left and 1 Right
(Uses 08024 and 01083 screws to mount to 02015)
PRODUCT FEATURES
1964 Chevrolet Impala SS - Fully Functional Hopping Lowrider
Expertly designed and engineered, the Redcat SixtyFour hopping lowrider captures the 1964 Chevrolet Impala SS in a classic highly-detailed, fully-functioning 1:10 scale Remote Control Car. The SixtyFour was designed from the ground up with the lowrider, auto enthusiast and R/C scaler communities in mind.
Every detail of the SixtyFour was painstakingly and passionately created with scale accuracy and detail. The Impala SS interior and exterior badging adorn the 1964 Impala SS body and interior. 23 individual chrome plated molded parts are used to create the body’s accessories. Optional LED lights are available for night time cruising. Clear windows feature high quality chrome foil trim to complete the ultra-realistic appearance. The attention to detail continues below the body, with the chassis frame, faux transmission and functional solid rear axle with removable differential cover.
The SixtyFour is designed for slow cruising and performing tricks that you can only do with special hydraulically actuated suspensions. Using specialty servos and precision weight bias, it replicates the driving style and overall look of a full sized lowrider / hopper.
Vehicle Features
• Officially licensed and highly detailed 1964 Chevrolet Impala SS body
• Scale 14 inch spoked wheels
• Detailed chrome injection molded trim
• LED light kit ready
Mechanical Features
• Patented vehicle hopping system – U.S. Patent No. 11,083,973
• Real-time adjustable ride height
• Ultra fast custom made REEFS RC Hopping Servo
• Two 25KG rear axle height adjustment servos
Radio Features
• 6-Channel LR6X Radio control with lowrider style switches
• Individual switches for each of the 3 height adjustment servos
• Momentary switches for raising either the front or rear to max ride height / hopping
• Momentary buttons for lowering either the front or rear to minimum ride height
HWI30502001, Hobbywing Multifunction Gen2 LCD Professional Program Box
This Hobbywing Multifunction Gen2 LCD Professional Program Box is for programming Hobbywing brushless ESCs. The user friendly LCD interface makes ESC programming quick and easy. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. It is very compact, portable and applicable for field use.
NOTE: A external battery is needed for powering this program box when the ESC has no built-in/external BEC.
Features:
Works with Platinum, XeRun, EzRun, and Seaking series ESCs
Specifications:
Size: 91x51x17mm (LxWxH)
Weight: 65g
Input Voltage: 4.5V—12.6V
Interface: USB C
ESC interface: Futaba plug
Power supply interface: Futaba plug
This product was added to our catalog on June 4, 2021
PRODUCT FEATURES
Redcat’s new Volcano-16 monster truck offers aggressive looks and performance. The Volcano-16 is ready to run, complete with (2) 7.4V 800mAH Li-ion rechargeable battery packs, USB Li-ion battery balance charger cable, a 2.4GHz radio system and sticker sheet. The Volcano-16 even includes a set of LED headlights.
The Volcano-16 monster truck is available in red or blue and is small enough to be driven indoors and powerful enough to trample the great outdoors. This compact 1/16 scale monster truck is packed with lots of exciting features.
The Volcano-16 is powered by a 390 brushed motor and splashproof brushed ESC/receiver. A metal heatsink helps to keep the motor cool and T-style connectors ensure reliable power delivery from the rechargeable Li-ion battery pack. The Volcano-16 includes two rechargeable 7.4V Li-ion 800MAH battery packs. Only one battery pack is used at a time, so one can be charged while the other is being used in the vehicle. The included 2.4GHz pistol grip radio offers reliable control and comfort. The radio includes steering and throttle adjustments, as well as servo reversing. This efficient radio only requires two standard AA batteries, which can be purchased separately.
The Volcano-16 includes a durable plastic tub chassis, beefy independent suspension arms, adjustable threaded body coilover shocks, front and rear gear differentials and full time shaft driven 4WD. The large front and rear bumpers, with impact resistant mounting brackets, look good and offer protection against crashes. Pop in the included set of LED headlights for enhanced night time visibility.
An aggressive tire design offers excellent traction on multiple surfaces and the firm tire compound offers long lasting tread wear, even when driving on pavement. The black plastic wheels are durable and stylish.
Specifications
Length: 270mm
Width: 215mm
Height: 130mm
Wheelbase: 175mm
RTR: Ready-To-Run
Motor/ESC: 390 Brushed Motor & Splashproof Brushed ESC/Receiver
Radio: 2.4GHz Radio System
Batteries: Qty. 2 - 7.4V Li-ion 800MAH Rechargeable Battery Packs (spare battery pack included)
Charger: USB Li-ion Battery Balance Charger Cable Included
Battery Connectors: T-style
Chassis: Durable Plastic Tub Chassis
Drive System: 4-Wheel-Drive
Transmission: Single Speed
Differentials: Front and Rear Gear Differentials
Suspension: Independent Front and Rear Suspension
Shocks: Adjustable Coilover Threaded Plastic Body
Needed to Run
2-AA Batteries for the Transmitter
USB Outlet or Power Brick
Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EzRun MAX10 SCT is able to deliver unmatched power and performance for even the most hardcore applications. With incredible acceleration capabilities and a rock-solid, stable output, the MAX10 SCT can handle instant full-torque start-ups for wheelies, high-speed racing on straightaways, and powering through the bumpiest terrian. The MAX10 SCT features an electronic switch with a lifespan of over 50000 on/off cycles,
housed in a completely waterproof, dust-prood and shock-resistant design.
Features:
Cont./Peak Current: 120A/760A
Input: 2-4S LiPo/6-12 Cells NiMH
BEC Output - Switch Mode: 6V/7.4V,3A
Size: 49.0x39.5x34.7mm
Weight: 105g
KV Rating: 2S LiPo: up to 6000KV, 3S LiPo: up to 4000KV, 4S LiPo: up to 3000KV (36XX Series of Motors)
PRODUCT FEATURES
Get ready for high-speed intense action on grueling off-road terrain with the exciting new Redcat Wendigo 1/10 electric Rock Racer! Designed to look and handle like a full-scale rock racer, the Wendigo utilizes solid axles both front and rear, a steel frame chassis and oversized suspension components. Simply put, this is purpose built true-to-scale rig!
Rock racing is similar to rock crawling, but with a wider range of obstacles and the drivers compete for the fastest time. Because rock racing demands so much from a vehicle, these trucks must be both capable and durable. Rock racers are faster than typical rock crawlers, which is why the Wendigo is fitted with a Hobbywing 60A brushless ESC and A 3300KV 540 size brushless motor. The Wendigo is capable of running 2S or 3S LIPO power.
The Wendigo features a front mounted motor, centrally mounted divorced transfer case and strategically placed battery tray. This setup offers excellent weight distribution which causes the Wendigo to behave predictably when climbing over obstacles. Proper balance is also important when putting on your race hat. The Wendigo is able to blast around high speed tracks and obstacles with a finesse not commonly found in solid axle RTR vehicles.
The Wendigo features 1.5mm steel ladder-type frame rails which provide a sturdy backbone for this vehicle. The wheelbase is adjustable from 334.7mm to 358.7mm, with 346.7mm being the stock configuration. The Wendigo’s gear boxes feature Mod1 gears and ball bearings. The heavy duty telescoping driveshafts provide reliable power delivery to the front and rear trussed axle housings. These axle housings feature diamond shaped pumpkins and upper trusses for rigidity. A metal spool ensures equal power transfer to both the left and right heavy duty straight axles, while a one piece pinion gear provides additional strength to the drivetrain.
The Wendigo’s aluminum body oil filled shocks have a threaded collar for quick adjustments to the vehicle's ride height. Each shock tower offers nine upper shock mounting positions for further suspension tuning. Heavy duty 5mm steel suspension links are used in the Wendigo’s front and rear suspension. An adjustable rear sway bar helps to minimize torque twist and adds stability during high speed cornering.
A rock racer wouldn’t be complete without high quality off road tires and wheels. The Wendigo sits on licensed Interco Super Swamper 2.2” tires which are mounted to licensed Raceline Avenger wheels. The Super Swampers scooped tread lugs provide excellent forward grip on dirt, grass, pavement, rocks, mud and snow. The aggressive tread design and lug spacing release dirt and debris, keeping the tire clean for the next obstacle. Side lugs allow the Wendigo to achieve grip while squeezing between two large rocks, through washouts and other canyon-like obstacles.
High performance tires deserve a high performance wheel. The Raceline Avenger wheels are precision made with the right amount of offset and superior durability.
Many scale details and accessories come standard with the Redcat Wendigo to ensure users get the very best visual experience from their vehicle. This Rock Racer features a realistic racing body with narrowed rear quarters and a full roll cage. Additional scale details include a driver and co-pilot with adjustable helmet visors, a realistic navigation screen, rear fuel cell and a radiator with twin cooling fans.
• Full roll cage, True to scale Rock Racer chassis, Realistic cock pit, Solid front & rear axle, Threaded oil filled aluminum shocks & Ball bearings throughout.
• Tunable suspension, Adjustable wheelbase, Tunable shocks & Selectable shock positions.
• Rear sway bar, Super fast, Great handling, Realistic looking rock racer tires, Unique high performance chassis design.
• 3300KV RC540 Brushless Motor, Waterproof 60A ESC (2s-3s LIPO ready), Waterproof high torque 25KG metal gear steering servo, 2.4GHz radio system.
• Assembled & Ready to Run - Requires 6-cell NiMH battery or recommended 2S or 3S LIPO battery & Charger - Requires AA Batteries for Transmitter.
PRODUCT FEATURES
Are you ready for an adrenaline explosion? Fast and powerful, the Redcat Racing Volcano EPX is equipped with a 19T brushed 550 electric motor, waterproof electronic speed controller (ESC) and, thanks to its large aggressive tires, the traction needed to put all that power to the ground.
The lightweight molded plastic chassis is designed to be durable, while providing a low center of gravity for high speed off road action. Speaking of durability, the Volcano EPX utilizes a 4WD shaft driven drivetrain with steel dogbone axles, and eight aluminum capped oil filled shocks.
The Volcano EPX is fully adjustable and upgradeable. The shocks can be tuned with the included preload spacers or, for even more tuning options, you can buy different weight oils and springs . Tunable sealed differentials, and four wheel independent suspension, allow the driver to get loads of traction, on a multitude of surfaces.
The Volcano EPX is also equipped with adjustable metal turnbuckles, so camber and toe angle can be fine tuned for the best performance possible. The Volcano EPX monster truck is a completely tunable hobby grade RC monster truck and comes pre-tuned for most driving situations.
Many custom aftermarket parts are available for the Volcano EPX monster truck. These aftermarket parts include color anodized machined aluminum as well as many other performance options.
Volcano EPX is erupting with excitement. Get yours today!
• 4WD Monster truck w/ Large monster truck tires, Lightweight molded plastic chassis, (8) Aluminum capped oil filled shocks, front and rear gear differentials.
• Tunable suspension, Adjustable ride height, Tunable shocks, Tunable gear differentials, Adjustable camber, Adjustable toe angle.
• Aggressive tires, Independent suspension, Low center of gravity chassis for high speed performance, Ball bearings throughout.
• 19T brushed 550 electric motor with heat sink, Waterproof ESC, Waterproof high torque steering servo, 2.4GHz radio system.
• Assembled & Ready to Run - Includes 7.2V 2000mAh NiMH Battery & NiMH Charger - Requires 4-AA Batteries for Transmitter
PRODUCT FEATURES
Hobbywing 60A Brushless Speed Controller (Sensorless)
Splashproof
Deans Connector/T-Plug
WARNING: These Electronics CAN NOT be submerged!
Specifications:
Maximum continuous current: 60A
Maximum burst current: 390A
Input: 2-3S LiPO***, 4-9 cell NiCD/NiMH***
Motor limit (2S LiPO, 4-6 cell NiCD/NiMH): 4500kv
Motor limit (3S LiPO, 7-9 cell NiCD/NiMH): 3500kv
BEC: 3A/6V switching type
Dimensions: 48.5*38*32mm
Weight: 90g
Motor Plugs: 4mm female bullet
Battery Plug: Deans/T-Plug
***Only 2S LiPO or 6-7 cell NiMH/NiCD battery packs are recommended for Redcat Racing vehicles that use this ESC. Using more voltage than what we recommend will void all warranties and is at your own risk!***
PRODUCT FEATURES
Hobbywing 1/10 Brushed Waterproof ESC
Specifications:Maximum continuous current: 40A
Maximum burst current: 180A
Input: 2-3S LiPO***, 5-9 cell NiCD/NiMH***
Motor limit (2S LiPO, 5-6 cell NiCD/NiMH): 540/550 size, 12TMotor limit (3S LiPO, 7-9 cell NiCD/NiMH): 540/550 size, 18T
Resistance: Forward 0.002ohm, Reverse 0.004ohm
BEC: 2A/6V constant
Dimensions: 46.5*34*28.5mm
Weight: 65g***Only 2S LiPO or 6-7 cell NiMH/NiCD battery packs are recommended for Redcat Racing vehicles that use this ESC
Using more voltage than what we recommend will void all warranties and is at your own risk
Same as 03018
Same as b7003w
HX-403, Hexfly HX-403 Dual Port 2S, 3S, 4S AC/DC LiPo LiFe Battery Charger
PRODUCT FEATURES
The Hexfly HX-403 charger is an easy to use multifunctional charger with built in LiPo balancing for 2S - 4S LiPo or LiFe batteries. You can charge two 2S batteries at the same time or one 3S or 4S batteries.
With built in power supply, the HX-403 is an all in one package at a price that is hard to beat.
Specifications:
Input Voltage - AC 100~240V / DC 10~18V
Current Rate Range - 0~3.0A
Support for Charging - 2s*2/3s/4s (cells)
Support JST-HX 2.5 Connector
Features:
Detect current rate and capacity of individual cell
Identify the Cell Count Automatically
Auto Charger and Auto Cut-Off for Safety
Temperature Protection Function - Automatically Adjust Charge Power to protect from overheating
PRODUCT FEATURES
Steel Spur Gear (64T, .6 mod)
Replacement Main Spur Gear for Volcano EPX Pro, can be used in all EPX and STK models by upgrading to steel pinion gear(motor gear)
