AMAX Motors are back with a special half-hollow shaft and further improved "A-Bell" design, making slipped magnets and dented bells a thing of the past! Smooth, powerful and extremely durable!Check out all our brushless motors and the entire AMAX selection!
Features
Half-hollow shaft is for strength and light weight
Fully encased magnets in the new A-Bell design
Wave structure on bell for enhanced cooling and robustness
Specifications
Kv: 2550
Input Voltage: 3-4S
Motor Height: 16.5mm
Stator Dimensions: Φ22x7mm
Output Shaft Dimensions: M5
Wire Dimensions: AWG x 150mm
Mounting Pattern: 16x16mm
Weight (w/o wires): 28.1g
Includes
1x AMAX Performante A-Bell 2207 2550Kv Motor
AMAX Motors are back with a special half-hollow shaft and further improved "A-Bell" design, making slipped magnets and dented bells a thing of the past! Smooth, powerful and extremely durable!Check out all our brushless motors and the entire AMAX selection!
Features
Half-hollow shaft is for strength and light weight
Fully encased magnets in the new A-Bell design
Wave structure on bell for enhanced cooling and robustness
Specifications
Kv: 2550
Input Voltage: 3-4S
Motor Height: 15.4mm
Stator Dimensions: Φ23x5.5mm
Output Shaft Dimensions: M5
Wire Dimensions: AWG x 150mm
Mounting Pattern: 16x16mm
Weight (w/o wires): 23.9g
Includes
1x AMAX Superleggera 2305.5 2550Kv Motor
Revised version now includes a power switch and additional solder pads.The Analog FPV FatShark Module Adapter V2 for DJI Digital FPV Goggles fits so well you can use a fat shark or various third-party fat shark style analog video receivers modules! It transfers video and audio signals to the high-quality screen of DJI FPV goggles for viewing or recording. This compact and lightweight adapter is easy to install and won't void your warranty! Check out all our DJI compatible frames, electronics & accessories and our FPV receiver modules & antennas collection!Specifications
Input Voltage: 2S-4S (DC5.5x2.1mm)
Internal Voltage: 5V 3A (with pad output)
Output Voltage: 2S-4S (DC 5.5x2.1mm)
Signal Input: Standard Fat Shark Receiver Port
Including third-party receivers: Realacc, Furious, etc.
Signal output: standard audio / video
Power Switch
Dimension: 48x28x12mm
Weight: 10g (without extension cable)
Includes
1x Analog FPV Adapter for DJI Goggles
1x Adapter mounting board and screws
1x Audio and video cable
1x Power cable
Wiring Diagram
V3 now includes a voltage display, power switch and additional solder pads.This analog fat shark module adapter fits on the side of your DJI Digital FPV Goggles so you can use a fat shark or various third-party fat shark style analog video receivers modules! It transfers video and audio signals to the high-quality screen of DJI FPV goggles for viewing or recording. This compact and lightweight adapter is easy to install and won't void your warranty! We also have the V2 Adapter if you don't need the voltage display. Seen below installed in the Aluminum Case we carry specifically for this device:Check out all our DJI compatible frames, electronics & accessories and our FPV receiver modules & antennas collection!
Specifications
Input Voltage: 2S-4S (DC5.5x2.1mm)
Internal Voltage: 5V 3A (with pad output)
Output Voltage: 2S-4S (DC 5.5x2.1mm)
Signal Input: Standard Fat Shark Receiver Port
Including third-party receivers: Realacc, Furious, etc.
Signal output: standard audio / video
Dimension: 55x28x12mm
Weight: 13g (without extension cable)
Includes
1x Analog FPV Adapter V3 for DJI Goggles
1x Adapter mounting board and screws
1x Audio and video cable
1x Power cable
1x Allen Key
Wiring Diagram
This new strap can be used on a 2s, 1600mAh battery all the way up to a 4s, 3000 mAh battery. It fits all Armattan models. It is coated with rubber so that your battery will not slip out of place easily. Now with a metal buckle for extra strength.
Check out the rest of our battery straps and all our Armattan products!
Includes
1x Armattan Anti-Slip Battery Strap
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The AtomRC Dolphin Plane Kit is a durable lightweight plane with molded EPP embedded with carbon fiber tubes. Features include a detachable nose and wings, integrated GoPro mount, fuselage protector, and other cool features!
This is a kit you will need a receiver, battery, ESC, motor, and FPV system.
Find the FPV PNP and PNP versions here!
Browse the rest of our Wing Gear!
Features
845mm wingspan
EPP molded , embedded with carbon fiber tubes, durable and lightweight.
Carbon fiber tubes help keep wings rigid during flight
Detachable wing, easy to transport.
Detachable nosecone for GoPro mounting
V tail design for added stability
Pre-installed wing and fuselage protector for durability
Compatible with GoPro Hero 5-7.
Movable battery slot for “CG” adjustment.
Pre-installed camera and VTX antenna cable for FPV gear.
Air inlet and outlet for FPV gear cooling.
Specifications
Wingspan: 845mm
Length: 710mm
Propeller recommend: 5~6 inch
Battery recommend : 4S 1300-2200mah
Dimension: 660*225*135mm
Includes
1 x Dolphin Kit
1 x Ball Push/Push Rod
1 X Sticker
1 x Battery Strap
1 x Camera Cable
1 x SMA to UFL VTX cable
1 x Screws
Diagram
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The AtomRC PNP Dolphin Plane is a durable lightweight PNP plane with molded EPP embedded with carbon fiber tubes. This has everything you need to fly, just add an RX and and FPV system. Features include a detachable wings and nose, fuselage protector, integrated GoPro mount, and other cool features!
Unlike most PNP planes, you will have to install the included electronics.
Find the Kit version here!
Browse the rest of our Wing Gear!
Features
845mm wingspan
EPP molded , embedded with carbon fiber tubes, durable and lightweight.
Detachable wing, easy to transport.
Carbon fiber tubes help keep wings rigid during flight
V tail design for added stability
Detachable nosecone for GoPro mounting
Air inlet and outlet for FPV gear cooling.
Compatible with GoPro Hero 5-7.
Pre-installed wing and fuselage protector for durability
Movable battery slot for “CG” adjustment.
Air inlet and outlet for FPV gear cooling.
Specifications
Wingspan: 845mm
Length: 710mm
Dimension: 660*225*135mm
Propeller recommend: 5-6 inch
Battery recommend : 4S 1300-2200mah
Includes
1x Dolphin KIT
1x 2306 Motor
1x ATOMRC Exceed 9g Servo
Diagram
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
This lightweight, dual motor glider is sure to get you maximum flight time! This quiet and efficient wing is great for beginners or even the most experienced aviators!
We also sell this wing without the FPV system, for line of sight flying, or adding your own custom FPV setup.
Check out all our PNP wings, as well as our AtomRC selection!
Features
Compact size(only 650 wingspan), swift and durable, easy for beginners
The special designed 2 in 1 ESC and VTX makes the electronics wiring clean
Come with PNP/FPV version, all part is installed, no need glue or soldering anymore
Sub 250g design, makes the glider fly without regulation, also easy to fly in the park and small area
Specifications
Wingspan: 650mm
Length: 570mm
Material: EPP
Wing Area: 6.15 dm²
Recommend motor: 1105 5000KV
Recommend prop: 3016-3 Blade
Recommend battery: 3S 750mah
Servo: 4.3g servos
Includes
1x Pre-built plane
1x ATOMRC Exceed 2in1 BLS 10A ESC (Bulid in 5V BEC,Input 2~4s.)
2x 1105 5000KV Motor
4x 4.3G Digital Servo
4x 3016-3 Propeller
1x ATOMRC TX500 VTX
1x Foxeer Razer Nano 1200TVL 14mm CAM
1x 5.8G Antenna
Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground.
The AtomRC RTH Dolphin V1.1 is a 845mm wingspan V-tail plane. The Dolphin can fly stable at high and low speeds, and the large fuselage offers lots of space to install the electronics. The detachable wing made the wing easy to transport, V tail made the Wing more stable for cruising. This wing has a black body with white accents and stickers to further style your craft. This wing will come with an AtomRC F405 NAVI FC, allowing you to use the Return To Home(RTH) feature as the RTH version can come right back to you and land. It's good to know about the flight controller having the ability to use two firmware INAV or Arduplane, both firmware's already pre-turned for the plane. This wing comes as a pre-built kit, PNP, pre-tuned, and with all electronic are pre-installed. This wing is perfect for beginners and stress free for veterans.
Note: You are going to need; Radio, Receiver, Battery, and a Charger. Although this system has Return To Home (RTH) included, you will need to add components like a camera and VTX for FPV.
Ardupilot parameter settings can be found here.
Browse the rest of our PNP wings, as well as our AtomRC selection!
Features
EPP molded wing, embedded with carbon fiber tube, durable and light weight.
Carbon fiber tube enhanced elevens, more rigid elevens during high speed fight.
Detachable wing, portable to transport.
Detachable head, two head for choice, use can choose fly with Gopro or without Gopro.
Rubber band and magnet to lock the Gopro, easy to install the Gopro.
V tail design make the wing more stable than normal fly wing.
Pre installed wing and fuselage protector, more durable during landing.
Compatible with GOPRO hero 5-7.
Movable battery slot for better “CG” adjustment.
Pre installed camera cable and antenna for FPV gear.
Air inlet and outlet for FPV gear cooling.
Specifications
Wingspan: 845mm
Motor: AtomRC 2306 1700Kv (included)
ESC: AtomRC BLS 30A 2-4S with 5V/3A BEC (included)
Servo: AtomRC 9g Digital Servo 300mm 2pcs (included)
FC: AtomRC F405 NAVI (included)
GPS: BN220
Prop: 7042-2
Material: EPP
Package Size: 675 x 174 x 285mm
Length: 710mm
Recommendations
Recommend Propeller: 5-7" (Comes with 2 Bi-Blade 7" Props)
Recommend Battery: 4S 1300-2200mah (Not Included)
Recommend Radio: more than 6CH (Not Included)
Includes
1x AtomRC RTH Dolphin V1.1 FPV Fixed Wing - Black/White
1x AtomRC BLS 30A 2-4S with 5V/3A BEC (Installed)
2x AtomRC 9g Digital Servo 300mm (Installed)
1x AtomRC 2306 1700Kv (Installed)
1x AtomRC F405 NAVI (Installed)
1x Sticker Sheet
1x User Manual
1x Carbon Tube
2x 7042 Props
Premium performance. That’s been the focus of AxisFlying since they started a year ago. These amazing new cinewhoop motors offer exceptional power and can keep the heaviest of HD cams in the air!
Check out our vast motor selection and all our Axis Flying Products!
Specifications
Input Voltage: 4S
Kv Rating: 3500Kv
Configuration: 12N14P
Wire: 20#AWG 150mm length
Shaft Diameter: 1.5mm T
Weight (Incl. Cable): 22g
Mounting Pattern: 12x12mm M2
Includes
1x Axis Flying C204 2004 3500Kv Motor
Based on the F405 2-4S 20A Flight Controller V4, the F405 4S 20A Toothpick Flight Controller V5 applies a new ICM42688 gyro and ESC chip that comes with BLUEJAY ESC firmware so it supports bidirectional D-shot. In addition to plug-and-play ports for the receiver and HD Digitial VTX, the same as the V4 board, the V5 board is made with a more rational layout for easy solder and preventing solder from jumping to another pad and shorting components.
Check out all our whoop flight controllers, and all our BetaFPV gear!
Features
Not only is the flight controller board made with a rational layout, but it is also designed with larger solder pads. It is very easy for pilots to solder external electronics.
The flight controller is capable of handling 20A continuous current and reaching 25A peak current due to high-quality MOSFETs.
Soldering motor wires to the pad directly allows lower resistance for more current on motors. Besides, solder pads are reinforced by thick copper and edge plating processes, ensuring a solid value and durable use.
Reserving the UART ports layout, UART3 for RX, UART4 for HD digital VTX, UART6 for Analog VTX, and UART1 for spare use, it is more convenient for pilots to solder.
This board comes with a 25.5x25.5mm whoop mounting pattern; this board can be added to both the toothpick drone and the cinematic whoop quadcopter
Note: F405 4S 20A FC V5 is available to flash both BLHeli_S and BLUEJAY ESC firmware and it comes with default BLUEJAY firmware. The main difference is that the BLUEJAY firmware supports bidirectional D-shot, while BLHeli_S does not support it.
Comparison to F405 2-4S 20A V4 FC
We upgraded the F405 2-4S 20A V4 board to V5 by adopting ICM42688 gyro instead of MPU6000 and adding some new features. ICM42688 gyro works great in most cases. Except for the gyro, the V5 board comes with a completely new ESC firmware that supports bidirectional D-shot. The way to connect motors changed and is solderable only on the V5 board. Besides the V5 FC board features high-quality material for stability and durability. The below pictures show the difference between the two flight controllers.
Note: The F405 2-4S 20A Flight Controller V4 with BMI270 gyro will be available for purchase for a period of time.
Diagram for Toothpick F405 20A AIO FC V5
The board integrates 2 LEDs, including the Power LED (Red) and the FC LED (Blue).
LED
Status
Description
Power LED (Red)
Solid
Power on
FC LED (Blue)
Solid
Motor Armed
Connecting External RX/HD Digital VTX
F405 4S 20A FC V5 integrates the Plug & Play port for the external RX and HD digital VTX, and there will be a 4-pin connector for RX and a 6-pin connector for HD digital VTX in the package. Thus, we highly recommend pilots use the port to save the solder work.
FC & ESC Firmware:
The default firmware is including CLI dump file. But if you flash firmware from the Betaflight configurator official site, please flash a CLI dump file for F405 4S 20A FC V5. We offer the default firmware and CLI dump file to download.
Download the FC default firmware betaflight_4.3.1_BETAFPVF405 and CLI dump file.
F405 4S 20A FC V5 is available to flash both BLHeli_S and BLUEJAY ESC firmware and it comes with default BLUEJAY firmware. The main difference is that the BLUEJAY firmware supports bidirectional D-shot, while BLHeli_S does not support it. Here are the download links for two firmware.
Here are the download links for ESC firmware. Please configure the BLUEJAY firmware through ESC - Configurator or Bluejay Configurator software.
Download the BLUEJAY ESC firmware
Download the ESC - Configurator
Download the Bluejay Configurator
We offer BLHeli_S ESC firmware for pilots. Please configure the BLHeli_S ESC firmware through BLheliSuite, BLHeli - Configurator, or ESC - Configurator software.
Download the BLHeli_S ESC firmware
Download the BLHeliSuite16714902a
Download the BLHeli - Configurator
Download the ESC - Configurator
frame like Pavo25 and X-knight 35.
Specifications:
Flight Controller
CPU: STM32F405RGT6
Six-Axis: ICM42688 (SPI connection)
Mounting Size: 25.5x25.5mm (M2 Anti-vibration rubber damper available)
FC Firmware: betaflight_4.3.1_BETAFPVF405
OSD: Built-in Betaflight OSD (OSD chip: AT7456E)
Receiver: SBUS/CRSF/DSMX Receiver
BEC: 5V 3A
Built-in current sensor
Weight: 8.35g
ESC
ESC Chip: SILABS EFM8BB21F16G-C
Support D-shot150, D-shot300, D-shot600, Oneshot125, Multishot, PWM
Input voltage: 2S-4S Lipo
Continuous current: 20A
Peak current: 25A
Firmware: G_H_20_48_v0.16.HEX (Default BLUEJAY), BLHeli_S (Optional)
Includes
1x BetaFPV F405 V5 2-4S AIO Whoop/Toothpick Flight Controller (w/ 20A 8Bit 4in1 ESC) - ICM42688
1x Cable Pigtail (XT30)
1x 6-Pin Connector for Digital VTX
1x4-Pin Connector for RX
4x M2x12 Screws
8x M2 Nuts
4x M2 Anti-vibration Rubber Dampers
Disassemble at your own risk, we are not responsible for any damage to your camera!
Plastic injection molded GoPro Lite case from BetaFPV. BEC board is optional and also has an adapter for the BetaFPV ND16 Filter for GoPro Lite
This case and BEC board fit the GoPro HERO6 and GoPro HERO7 Black. But NOT for GoPro HERO8.
Check out all our replacement cam parts & accessories and all our BetaFPV selection!
Features
Plastic injection molded,
Easy assembly
Lightweight
Specifications
Weight: 6.57g
Output: 5V@2A
Voltage: 2-4S
Includes
1x BetaFPV GoPro Lite Case V2 for Naked GoPro
1x BEC Board
Instructions for Assembly
How to Assemble
Step 1: Assemble the BEC board on the GoPro motherboard.
Step 2: Hold the camera lens and the camera board at the same time, be careful when you assemble the board on the case.
Step 3, 4: Screw the GoPro motherboard with the M1.4*5 and M1.4*8screws as shown below
Step 5: Install the light pipe as shown below.
Step 6: Install the back case, and screw the board with M1.4*8 screws as shown below.
How to Disassemble GoPro HERO6 Black
Special thanks to JONAH BLAESER who provided the method of disassembling GoPro HERO6 Black. If you are interested, please check the link to know the specific steps to make your own naked GoPro.
GoPro HERO6 Black Disassembly Guide
We also provided the method of disassembling GoPro HERO8 Black. If you are interested, please check the link.
GoPro HERO8 Black Disassembly Guide
Note: Do this at your own risk. You will lose your GoPro’s warranty and you may end up bricking the camera if something goes wrong. This guide is not authorized by GoPro and your camera is not guaranteed to work afterward.
These screws and rubber dampers are really useful for mounting your Whoop / Toothpick FC.
Check all our whoop frames & accessories and the rest of our BetaFPV selection!
Specifications
M1.2* 4 screws fit for stock Blade Indcutrix frame / 65mm frames.
M1.4* 5 screws fit for Eachine black E010 frame / 75mm / 85mm frames.
Black rubber dampers has a gap of 0.8mm, suitable for ALL brushed FC boards.
White rubber dampers has a gap of 1.2mm, suitable for 2S AIO FC boards, F405 FC stack etc.
Blue rubber dampers has a gap of 1.8mm, suitable for 2-4S AIO FC boards.
Includes
20x M1.2* 4 screws
20x M1.4* 5 screws
20x Black rubber dampers
20x White rubber dampers
20x Blue rubber dampers
The Brother Hobby Tornado T2 motors are an evolution of a loved classic. The weight has been reduced by 8%, while still increasing power. This results in a smoother, more agile flight.
Check out our other 1407 motors, and all our BrotherHobby selection!
Specifications
Kv: 3600Kv
Input Voltage: 3-4S LiPo
Configuration: 9N12P
Motor Dimensions: 18mm Φ x 28.2mm
Stator Dimensions: 14mm Φ x 7mm
Shaft Diameter: 5mm Φ
Mounting Pattern: 12mm Φ
Wire Dimensions: 26AWG x 160mm
Weight (w/ wires): 15.1g
Includes
1x BrotherHobby Tornado T2 1407 3600Kv Micro Motor
The Avenger 1507 line has been reshaped into the new VY series of motors! A great choice for cinewhoop builds, these are available in 3100Kv for 6S and 4150Kv for 4S.Check out the rest of our Micro Motors and all our Brotherhobby gear!
Specifications
KV: 4150KV
Configuration: 12N14P
Wire AWG: 24AWG
Magnet: N52H arc magnets
Copper wire: Missile Grade Material( resistant to 260℃）
No.of Cells(Lipo): 4-6S
Base casing: Al 7075
Bell cap: Al 7075
Bearings: Japanese NSK 5x2x2.5 mm
Stator: 0.15mm Nippon stell silicon steel
Bolt Pattern: M2 (12mm 12 mm)
Weight: 16.3g with 16cm long wires
Includes
1x Brother Hobby VY 1507 4150Kv Micro Motor
DarwinFPV 3-4S 30A ESC is currently the cheapest in the FPV world and a direct replacement for the Cineape, designed to reduce the budget of entry-level FPV pilots as much as possible. At the same time, we have also filled the ESC with glue, which greatly reduces the risk of damage to components caused by frequent crashes by novices.
Check out our other 20x20 ESCs and our Darwin FPV products!
Specifications
Input Voltage: 3-4S
MCU: EFM8BB21
Max Continuous Current: 30A
Max Burst Current: 35A
Firmware: Bluejay G_H_30
Mounting Pattern: 20x20mm
Weight: 4.9g
Includes
1x DarwinFPV Bluejay 30A 8Bit 3-4S 20x20 4in1 ESC
Pre-Orders shipping ASAP!
For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer.
DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ.
BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h.
The 4S version comes with powerful 1504-3600Kv motors, and choose between PNP (No RX) or ELRS 2.4GHz for your receiver!
Check out our other pre-built quads, as well as the rest of our DarwinFPV selection!
Features
Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high-cost performance；
It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster;
The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable;
The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash;
The independent action camera base can be used with naked GoPro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.
Specifications
Brand: DarwinFPV
Model: BabyApe Ⅱ 4S
Frame: Wide X
Wheelbase: 156mm
Size: 126mmx150mmx50mm
Flight Control: F411 MPU6500 AT7456E
Firmware：DARWINF411
Firmware: BETAFPV_Nano_2400_RX
The receiver's factory firmware is ELRS_V3.2.0
Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB
ESC: Bluejay 48KHz 3-6S 30A
Motor: 4S version：1504-3600KV
Propeller: HQProp T3.5x2x3GR-PC
Weight: 135.4 g (analog version)
Receiver: ELRS 2.4GHz
Darwin FPV "Cement" Ultra Durable FPV Drone Camera
Sensor type：1/3" CMOS Sensor
Image：16:9
TV System: NTSC
Horizontal Resolution：1200TVL
Lens：2.1mm 160°
Electronic Shutter: 1/50~1/100000 sec
Video Output: CVBS
Min. Illumination：0.001Lux
wb: automatic
DNR: 3D DNR
WDR: 100db
Input voltage: DC 3.7-24V
Working current：80mA@DC12V/170mA@DC5V
IP: IP67
Size：19x19mm
Weight：7.9g
DarwinFPV 25/200/400/600mW VTX
Output Power: 25/200/400/600mW(adjustable)
Frequency: 5.8Hz 40port
Power Supply Voltage Range: 5V
Weight: 3.5g
Pitch: 28x15mm(length x width)
Protocol: SmartAudio
Indicator Light Description:
Includes
1x DarwinFPV BNF Baby Ape V2 3.5" Analog Micro Quad - 4S - Choose Your Receiver
4x HQProp T3.5x2x3GR-PC
2x Battery cable strip ( 10x170mm)
2x EVA shock pad（thickness：10㎜）
1x Spare screws bag
1x Sticker
1x Manual
CineApe25 is DarwinFPV’s first cinematic whoop FPV drone. The frame is composed of upper and lower carbon plates and a high-strength injection guard, which is very strong and crash-resistant, and easy to disassemble. The motor adopts a 1504-3600KV long-life motor; we abandoned the traditional AIO solution and adopted the split design of the F4, 30A stack to reduce the maintenance cost in the future. The accessories adopt mature and stable solutions to maximize the durability and reliability of the drone.
Be sure to check out our Cinewhoop Collection as well as all DarwinFPV products we have for sale at RaceDayQuads!
CineApe25 is a very cost-effective whoop FPV drone. It not only solves the worries of beginners about the high-risk factors and high threshold of assembly but also improves the after-sales experience. If you are still struggling with which FPV drone to buy, DarwinFPV CineApe25 may be your best choice!
Features
Comes with high-strength one-piece injection-molded propeller guard, which has higher safety, and a stronger and more durable frame, also reduces the probability of risk, so you have more confidence to fly.
The new ducted aerodynamic design greatly optimizes power efficiency, and with the 1504-3600KV long-endurance motor, the CineApe 25 has a battery life of up to 9mins.
Compared with traditional stacks, we have treated the CineApe 25 stack with glue to protect it, which greatly reduces the risk of damage to the stack due to contact with metal particles, fine sand and gravel, weeds or dewdrops, etc.
The external Type-C parameter adjustment port is convenient for parameter adjustment.
It comes with quick-release design only needs to remove 7 screws to separate the top plate and the injection molding guard, which can easily deal with the scene in which accessories need to be replaced urgently.
The stack has built-in barometer and SD card slot, and reserves rich interfaces resource, which is facilitate upgrade and DIY in the future.
There are optional versions and HD VTX solutions can be provided.
Specifications
Brand: DarwinFPV
Model: CineApe 25 Cinematic FPV Drone
Frame Structure: True-X
Wheelbase: 112mm
Dimension: 160x160x43mm
Motor: 1504-3600KV
Propeller: HQProp T63MMX6
Recommend Battery: LiPo 4S 850mAh
Hovering Time: 9mins (4S 850mAh Battery)
Weight: 144g (Without Battery)
Flight Controller: F411 MPU6500 AT7456E
Reserved Connector: 1x SBUS (RX1 inverter), 2x Uarts 2x Softserial, 1x I2C, 1x RGB, 1x Buzzer, 1x USER (A15), 1x USB
ESC: BlueJay 3-4S 30A
Analog Version: CADDX ANT Analog CAM + 600mW Analog VTX
Includes
1x CineApe 25 Cinematic FPV Drone
4x HQProp T63MMX6 propeller (2L2R)
2x battery strap 10x170mm
1x EVA crashproof foam
1x EVA bottom plate shock-absorbing pad
1x Spare Screw Kit
1x Sticker
1x Manual
Diatone Roma F4 4 inch Long Range Frame Kit weighs only 47G with T300 3k carbon fiber, made for both 9 and 12mm motor mounting, in the deadcat configuration for props out of view!
Check out our Diatone Roma F4 LR Collection!
Check out the rest of our 4" frames, our Diatone gear!
Specifications
Wheelbase：176mm
Weight：47g
Prop Size：4inch
FC Mounting: 20x20/26.5x26.5m（M2）
Motor Mounting: 9mm/12mm
Camera Spacing: 20mm
Top Plate: 1.5mm
Medium Plate: 1.5mm
Bottom Plate: 1.5mm
Arm: 3mm
Rated Voltage (Recommendation：4S~6S
Aluminum alloy：7075
Carbon fiber: T300 3K
Includes
1x Diatone Roma F4 LR 4" Frame
ECP-5119, EcoPower "Basher" 4S 100C Hard Case LiPo Battery w/EC5 (14.8V/5000mAh)
This EcoPower 4S Hard Case LiPo Battery is your go-to option when it's time pull the trigger wide open, light up the tires and fling some dirt!
Sized for Arrma, Losi and more, this battery features a hard plastic exo-skin that protects the inner cells from the abuse of bashing. The case also features wire slots designed to allow the leads to sit flat, in the event you stack two batteries together for 8S use.
For Arrma vehicles that use the long inboard hook & look strap, you'll find the balance lead and ESC wires spaced apart to allow that strap to secure the batteries without damaging the wires.
Features:
Hard plastic case
Stackable design
100C discharge rate
5000mAh of capacity
EC5 connector (compatible with IC5)
Also available as a 3S (ECP-5118)
Specifications:
Type: Lithium Polymer
Capacity: 5000mAh
Voltage: 14.8V nominal
Connector Type: EC5 Ultra (12GA Wire)
Balancer Type: Align/E-Flite compatible (XH)
Number of Cells: 4
Weight: 420g
Dimensions (WxLxH): 47x139x37mm
Maximum Charge Rate: 2C (8.2A)
NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in over heated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell) Do not use the battery that has too low a voltage.
Do not expose batteries to sunshine or store/charge batteries at the temperature above 35°C or in a closed car. The high temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging or racing, do not charge the battery until it has cooled completely. Wait about 20 mins, then inspect prior to recharging.
This product was added to our catalog on December 16, 2021
The Emax Avan Blur propeller 2x1.9x3 was designed for Babyhawk Race 2 inch to maximize flight time and durability of the propeller without losing performance. This propeller is matched to Emax 1106 6000kv on 3s and 4s. A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Blur weighs 1.1 grams. Utilizing thicker airfoils greatly increases durability and stiffness. The hub diameter is also increased to thicken the root chord maximizing durability. Most of the weight is centralized near the hub creating a low moment of inertia of 0.77 grams*square centimeter which in turn makes a very responsive prop. The Avan Blur was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.
Be sure to check out all our 2" props, and all our EMAX gear!
Specifications
2 inch diameter
1.9 inch pitch
3 blades
weight: 1.1 grams
Moment of Inertia: 0.77 g*cm^2
Includes
4x EMAX Avan Blur 2x1.9x3 Tri-Blade 2" Prop (2CW, 2CCW)
EMAX has blessed us with another solid addition to our ever-growing selection of 2'' - 3'' gear! The Babyhawk series is a great selection for micro spec class racing so when you need to practice hard, you are going to need those extra props.
The Emax Avan Mini propeller 3x2.4x3 was designed for Babyhawk Race 3 inch to maximize flight time and performance. This propeller is matched to Emax 1106 4500kv for 3s and 4s flight. A true 2.4" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Most of the weight is centralized near the hub creating a low moment of inertia of 3.05 grams*square centimeter which in turn makes a very responsive prop. The large blade chord makes the propeller very durable.
The Avan Mini was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.
A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.
Be sure to check out all our 3" props, and all our EMAX gear!
Specifications
3 inch diameter
2.4 inch pitch
3 blades
Weight: 1.25 grams
Moment of Inertia: 3.05 g/cm^2
Includes
12x EMAX Avan Mini 3x2.4x3 Tri-Blade 3" Prop (6CW, 6CCW)
The Emax Avan Rush propeller 2.5x1.9x3 was designed for Babyhawk Race to maximize performance and flight time. This propeller is matched to Emax 1106 4500kv for 4s or the Emax 1106 6000kv on 3s. A true 1.9" pitch throughout the blade gives a linear control feeling across the throttle band while still achieving high speeds. This allows for ease of flight and more precision. With a special PC blend the Avan Mini weighs 1.25 grams. Utilizing thicker airfoils greatly increases durability and stiffness. Most of the weight is centralized near the hub creating a low moment of inertia of 1.24 grams*square centimeter which in turn makes a very responsive prop. The Avan Rush was designed from the ground up starting from design constraints such as RPM, air speed, and required thrust. From these constraints aerodynamic models were built to predict performance and to design the blade shape. Highly cambered airfoils were used to achieve high lift coefficients at high angles of attack prolonging stall. This allows for a higher blade angle while still remaining efficient. The cambered airfoils also allow a greater flight envelope making for great low end responsiveness while still being able to achieve high speeds.A special Polycarbonate blend is used to achieve high durability. This material is incredibly tough and ductile to resist fracture in high impact crashes. A thick blade root was designed to further increase this durability. Our injection mold process is optimized to reduce bubbles in the plastic to increase the strength of the propeller and to maintain superb balance.
AVAN Rush 2.5 inch prop (2xCW 2xCCW) 1 set kit
Geometry:2.5 inch diameter1.9 inch pitch3 bladesInertial Properties:weight: 1.4 gramsMoment of Inertia: 1.24 g*cm^2
The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform, and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit. This new version of Babyhawk is stronger than the previous generation and boasts a DJI O3 Air Unit, the new Babyhawk O3 can truly become a long-flying video capture acro drone for general use and fun as well as content creation. No more need to carry a GoPro, a big complaint of the Babyhawk II. Customers can now capture high-quality 4K video all with the onboard O3.
Check out all our pre-built quads, and all our EMAX gear!
Features
Improved video transmission with DJI O3 system
More durable frame redesigned for resilience.
Sub 250 grams
Specifications
Wheelbase: 155mm
Dry Weight: 154g
Frame Material: Carbon Fiber
Prop: Avan 3.5
Maximum size: 210mm
Input Voltage: 2-4S Lipo
Includes
1x EMAX BNF Babyhawk O3 w/ DJI O3 Air Unit - ELRS
Highest performance, smallest size, lightest weight - that is what the EMax Bullet 30 amp ESC offers. At a mere 3.9g (nearly half the weight of the closest competitor), and measuring 11.9 x 19.6mm, this ESC is TINY.
This ESC is capable of running all major protocols, including DShot 600, 300, and 150, and Multishot, and Oneshot 42/125. It comes pre-loaded with BLHeli 16.5, meaning you're ready to run out of the box.
Check out our ESC selection !
Features
The market's lightest and smallest ESC, designed specifically for high-level FPV racing.
Utilizing the latest BLHeli-S firmware (16.5), hardware PWM generates a signal to boost smoother throttle response and reduce noise.
Supports new digital signal: DSHOT, and analog signals: MULTISHOT, ONESHOT42, ONESHOT125.
Top quality MOSFET, ceramic capacitors. 3oz high TG PCB board, significantly improves heat dissipation and improves system efficiency.
New aluminum heat sink, offers protection from propeller strike damage.
Features high-temperature silicone signal cable for wire flexibility and ease of installation.
Specifications
Con.Current: 30A
Input Voltage: 2-4S
Weight: 3g
Includes
1x EMAX Bullet 2-4S DShot600 30A ESC
The Emax RSIII motor is rated at 2207, which is a classic stator size for racing and freestyle, and works off 2500Kv, which is ideal for 4S 5" quads.
Behold the RS3 (Race Spec III) motor from EMAX—the perfect fusion of top-level performance and an affordable price point. Designed from the ground up for drone racing, the RSIII optimizes voltages up to 4S LiPOs, while its 4mm Titanium alloy bearing shaft ensures smooth and efficient rotations. Get ready to experience unimaginable speed, total precision, and unmatched endurance—the RSIII is ready to revolutionize the racing circuit!
Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.
Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.
Prepare to redefine your drone racing experience with RSIII, the latest entry in the legendary lineage of EMAX high-performance motors. Embrace precision engineering, unmatched reliability, and lightweight design, tailored to elevate your racing prowess.
Have a look at the rest of our EMAX products, and our entire selection of motors!
Features
Precision bearing
Titanium alloy shaft
Anodizing
16x16mm hole pattern
Multi-strand winding
120mm 20 AWG silicone wire
Staggeringly light 29.3g with 2cm wires for the 2207 size makes the EMAX RS3 one of the lightest racing motors available. Available in 1800kv/2100kv/2500kv as well as 2306 stator size for those who desire a lightweight freestyle motor or low end torque race motor.
While the RS3 is extremely lightweight, no attention was spared towards the durability of this platform. EMAX took what they learned with the near indestructible ECO II line and applied this to the RS3 to provide high performance without the sacrifice of durability that many race motors make.
The RS3 has been under testing for the last 6 months with the fastest pilots on the planet to truly test the limits in terms of capability to withstand heat. The feedback from these pilots has been that the EMAX RS3 withstands excessive heat on 2100kv 6S without burning unlike any other motor they have tested to date.
Specifications
Framework: 12N14P
Length: 33mm
Diameter: 26.9mm
No.of cells: 3-4S 2500Kv
Propeller: 5"-5.5"
Weight: 29.4g(W/O Silicone Wire) 2500Kv
Prop adapter shaft thread: M5
Bearing Shaft: 4mm
Shaft Thread: CW
Lead: 20#AWG 120mm
Idle Current (10V): 2.1A
Internal Resistance: 42mΩ
Peak Current (6S): 45A
Max Power (6S): 750W
Includes
1x Emax RSIII Series 2207 2500Kv Motor
5x M3x8 Screw
5x M3x7 Screw
5x M3x6 Screw
1x Aluminum M5 nylock nut
1x Washer and Screw for shaft
The Emax RSIII motor is rated at 2306, which is a classic stator size for racing and freestyle, and works off 2500Kv, which is ideal for 4S 5" quads.
Behold the RS3 (Race Spec III) motor from EMAX—The perfect fusion of top-level performance and an affordable price point. Designed from the ground up for drone racing, the RSIII optimizes voltages up to 4S LiPOs, while its 4mm Titanium alloy bearing shaft ensures smooth and efficient rotations. Get ready to experience unimaginable speed, total precision, and unmatched endurance—The RSIII is ready to revolutionize the racing circuit!
Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.
Engineered for strength and endurance, the RSIII motors feature a robust 4mm Titanium alloy bearing shaft. This innovation ensures smooth and efficient rotation, making every racing maneuver feel effortless and precise.
Prepare to redefine your drone racing experience with RSIII, the latest entry in the legendary lineage of EMAX high-performance motors. Embrace precision engineering, unmatched reliability, and lightweight design, tailored to elevate your racing prowess.
Have a look at the rest of our EMAX products, and our entire selection of motors!
Features
Precision bearing
Titanium alloy shaft
Anodizing
16x16mm hole pattern
Multi-strand winding
120mm 20 AWG silicone wire
Staggeringly light 29.3g with 2cm wires for the 2207 size makes the EMAX RS3 one of the lightest racing motors available. Available in 1800kv/2100kv/2500kv as well as 2306 stator size for those who desire a lightweight freestyle motor or low end torque race motor.
While the RS3 is extremely lightweight, no attention was spared towards the durability of this platform. EMAX took what they learned with the near indestructible ECO II line and applied this to the RS3 to provide high performance without the sacrifice of durability that many race motors make.
The RS3 has been under testing for the last 6 months with the fastest pilots on the planet to truly test the limits in terms of capability to withstand heat. The feedback from these pilots has been that the EMAX RS3 withstands excessive heat on 2100kv 6S without burning unlike any other motor they have tested to date.
Specifications
Framework: 12N14P
Length: 32mm
Diameter: 27.3mm
No.of cells: 3-4S 2500Kv
Propeller: 5"-5.5"
Weight: 27.7g(W/O Silicone Wire) 2500Kv
Prop adapter shaft thread: M5
Bearing Shaft: 4mm
Shaft Thread: CW
Lead: 20#AWG 120mm
Idle Current (10V): 1.8A
Internal Resistance: 43mΩ
Peak Current (6S): 43A
Max Power (6S): 720W
Includes
1x Emax RSIII Series 2306 2500Kv Motor
5x M3x8 Screw
5x M3x7 Screw
5x M3x6 Screw
1x Aluminum M5 nylock nut
1x Washer and Screw for shaft
Introducing FETtec FM1404T 1404 3850Kv Micro Motor - Silver. Crafted to light yet powerful, this motor offers smooth operation for any quad related application. The design theory behind this motor was to have a high flexibility and speed. A clean metal polish like aesthetic that goes perfect on any style of quad.
Check out our micro motors and all of our FETtec products!
Features
Light
Powerful
Smooth
Specifications
KV: 3850
Configuration: 9N12P
Input Power: 3-4S
Motor Mounting: 12x12mm (M2)
Stator Diameter: 14mm
Stator Length: 4mm
Internal Resistance: 270mΩ
Shaft: 1.5mm T-mount (2mm Inside )
Motor Dimension(Dia. x Len.) Φ19.5 x 13.2mm
Max Continuous Power(3S): 185W
Idle current(10)@10V(A): 0.6
Weight: 11g (Incl. 3cm wires)
Max Current (3S): 13.5A
Max.Effciency Current: (2-4A)>83%
Includes
1x FETtec FM1404T 1404 3850Kv Micro Motor - Silver
1x Motor Hardware
Flash Hobby is one of the major brushless motor manufacturers and suppliers in China. Experience precise control and high-speed performance with the Flash Hobby Arthur Motor. Its 1106 stator size and 4500Kv of power provide optimal operation for your quadcopters. Get the most out of your flights with smooth performance and quick acceleration.
Check out our Flash Hobby Collection and the rest of our Micro Motors!
Features
1.5mm T-Mount Shaft
NSK bearing
7075-T6 aluminum bell
0.15mm Silicon steel sheet from Kawasaki, Japan
Specifications
KV: 4500
Configuration: 9N12P
Motor Cable: 26#AWG 115mm
Shaft Diameter: 1.5mm (T-mount)
Motor Bolt Pattern: 9x9mm
Stator Size: 1106
Weight: 7.5 (including cables)
Max pull：213g
Size: Φ14.4x12.8
Input Voltage: 2-4S
Includes
1x Flash Hobby Arthur 1106 4500Kv Micro Motor (1.5mm Shaft)
Flash Hobby is one of the major brushless motor manufacturers and suppliers in China. Experience precise control and high-speed performance with the Flash Hobby Arthur Motor. Its 1207 stator size and 5200Kv of power provide optimal operation for your quadcopters. Get the most out of your flights with smooth performance and quick acceleration.
Check out our Flash Hobby Collection and the rest of our Micro Motors!
Features
NMB bearing
7075-T6 aluminum bell
0.15mm Silicon steel sheet from Kawasaki, Japan
Specifications
KV: 5200
Configuration: 9N12P
Motor Cable: 26#AWG 115mm
Shaft Diameter: 1.5mm (T-mount)
Motor Bolt Pattern: 9x9mm
Stator Size: 1207
Max Pull: 213g
Weight: 10.3(including cables)
Size: Φ15.7x13.8
Input Voltage: 3-4S
Includes
1x Flash Hobby Arthur 1207 5200Kv Micro Motor (1.5mm Shaft)
Flash Hobby is one of the major brushless motor manufacturers and suppliers in China. Experience precise control and high-speed performance with the Flash Hobby Arthur Motor. Its 1408 stator size and 3650Kv of power provide optimal operation for your quadcopters. Get the most out of your flights with smooth performance and quick acceleration.
Check out our Flash Hobby Collection and the rest of our Micro Motors!
Features
5mm shaft
NMB bearing
7075-T6 Aluminum bell
0.15mm Silicon steel sheet from Kawasaki, Japan
Specifications
KV: 3650
Configuration: 9N12P
Motor Cable: 26#AWG 115mm
Shaft Size: 5mm
Stator Size: 1408
Weight: 16.5(including cables)
Max pull: 660g
Motor Bolt Pattern: 12x12mm
Input Voltage: 2-4S
Size: ф18.6 x 17.2
Includes
1x Flash Hobby Arthur 1408 3650Kv Micro Motor (5mm Shaft)
High power micro motor from Flash Hobby.
Available in multiple Kv options.
Check out our Flash Hobby Collection and the rest of our Micro Motors!
Specifications
KV: 4300KV
Max Power: 375W
Input Voltage: 2-4S
Peak Current: 17.05A
Configuration: 9N12P
Motor Size: ф21.5x16.0mm
Motor Cable: 26#AWG 110mm
Shaft Diameter: 3.0mm
Prop Mount Shaft Dia.: M5
Weight: 18g
Includes
1x Flash Hobby Arthur 1506 4300Kv Motor
Flash Hobby is one of the major brushless motor manufacturers and suppliers in China. Experience precise control and high-speed performance with the Flash Hobby King Motor. Its 1303 stator size and 5000Kv of power provide optimal operation for your quadcopters. Get the most out of your flights with smooth performance and quick acceleration.
Check out our Flash Hobby Collection and the rest of our Micro Motors!
Features
1.5mm T-Mount Shaft
Unibell Design
0.15mm Silicon steel sheet from Kawasaki, Japan
Specifications
KV: 5000
Configuration: 9N12P
Motor Cable: 28#AWG 133mm
Shaft Diameter: 1.5mm (T-mount)
Motor Bolt Pattern: 9x9mm
Stator Size: 1303
Weight: 8.2 (including cables)
Max Pull：210g
Input Voltage: 3-4S
Size: ф18.4 x 11
Includes
1x Flash Hobby King 1303 5000Kv Micro Motor (1.5mm Shaft)
Flash Hobby is one of the major brushless motor manufacturers and suppliers in China. Experience precise control and high-speed performance with the Flash Hobby King Motor. Its 2207.5 stator size and 2500Kv of power provide optimal operation for your quadcopters. Get the most out of your flights with smooth performance and quick acceleration.
Check out our Flash Hobby Collection and check out our vast motor selection
Features
NSK bearing
6082 Aluminum bell
Specifications
KV: 2500
Configuration: 12N14P
Motor Cable: 20#AWG 150mm
Shaft Diameter: 5mm
Motor Bolt Pattern: 16x16mm M3
Stator Size: 2207.5
Weight: 36g (including cables)
Size: ф28.9x 33.1
Max Pull: 1513g
Input Voltage: 2-4S
Includes
1x Flash Hobby King 2207.5 2500Kv Motor
The Flash 1303.5 motor offers great crash-resistance without weight, giving pilots high reliability and power. Quality materials and sturdy design feature NMB bearings, N52HS magnets and 220°C heat-resistant copper wire for top performance and long life. The 7075 Unibell bell ensures durability, and stunning colors provide smooth power and precise control. If you're looking for a quality motor, the Flash motor is a great choice.
Check out our vast brushless motors selection, and our FlyFishRC product selection!
Features
High strength titanium alloy shaft and 7075 aluminum
Ingenious non-slip structure of the prop seat
220°C high temperature resistant copper wire
NMB imported bearings and N52HS magnets
High-precision manufacturing and assembly process
Strict dynamic balance and performance QC
Specifications
Model: Flash 1303.5 (Silver&Purple)
KV: 5500
Input Voltage: 4S Lipo
Configuration: 12N14P
Motor dimensions (Dia x Len): 17.6 x 11.5MM
Weight: 7.5g(with 120mm wire)
Wire length: 24AWG 120mm
Mounting pattern: 9x9mm
Includes
1x FlyFishRC Flash 1303.5 5500Kv Micro Motor
1x Hardware Set
Take your 3.5 inch frames to next level with the FlyFishRC Flash 1804 3500Kv Micro Motor. It's designed with durability and crash-resistance in mind, crafted with high-quality materials like NMB bearings and N52HS heat resistant magnets, plus 7075 Unibell bells for reliable performance. Enjoy your rides knowing your motor can handle challenging conditions.Check out our micro motors and all our FlyFishRC product selection!
Features
Unibell Design
High strength titanium alloy shaft and 7075 aluminum
220°C high temperature resistant copper wire
NMB imported bearings and N52HS magnets
Thickened motor base
High-precision manufacturing and assembly process
Strict dynamic balance and performance QC
14g (including 150mm wires)
Specifications
Model: Flash 1804
KV: 3500
Input Voltage: 4S
Configuration: 12N14P
Motor dimensions (DiaxLen): 16.5x23.8MM
Weight: 14g with short wire
Wire length: 22AWG 150mm
Mounting pattern: 12x12mm
Includes
1x FlyFishRC Flash 1804 3500Kv Micro Motor
The FlyFishRC Flash 2004 1800Kv Micro Motor. It's designed with durability and crash-resistance in mind, crafted with high-quality materials like NMB bearings and N52HS heat resistant magnets, plus 7075 Unibell bells for reliable performance. Enjoy your rides knowing your motor can handle challenging conditions.Check out our micro motors and all our FlyFishRC product selection!
Features
Unibell Design
High strength titanium alloy shaft and 7075 aluminum
220°C high temperature resistant copper wire
NMB imported bearings and N52HS magnets
Thickened motor base
High-precision manufacturing and assembly process
Strict dynamic balance and performance QC
16.6g (including 150mm wires)
Specifications
Model: Flash 2004
KV: 1800
Input Voltage: 4S/6S Lipo
Configuration: 12N14P
Motor dimensions (Dia x Len): 16.5x26MM
Weight: 16.6g (including 150mm wires)
Wire length: 22AWG 150mm
Mounting pattern: 12x12mm
Includes
1x FlyFishRC Flash 2004 1800Kv Micro Motor
The FlyFishRC Flash 2207 Motor uses the Uni-Bell structure design providing high crash resistance while not adding more weight, providing high reliability and explosive power and thrust for FPV pilots at an affordable price.
Check out our vast brushless motors selection, and our FlyFishRC product selection!
Features
Frosted Matte Unibell Design
High-strength steel shaft and 7075 aluminum
Ingenious non-slip structure of the prop seat
220°high temperature resistant copper wire
NMB imported bearings and N52HS magnets
Thickened motor base and wire outlet protection braces
High-precision manufacturing and assembly process
Strict dynamic balance and performance QC
34.2g (including 150mm wires)
Specifications
Model: Flash 2207
Input Voltage: 3-4S Lipo
Kv: 2750Kv
Configuration: 12N14P
Mounting pattern: 16x16mm
Stator Diameter: 23mm
Stator Height: 6mm
Shaft Diameter: Φ5.0mm
Size: Φ28.4x32.3MMmm
Weight: 32.2g
Target: Freestyle & Racing FPV
Includes
1x FlyFishRC Flash 2207 2750Kv Motor
1x Hardware Set
Introducing the Sword Motor - FlyFishRC's newest innovation! Bringing you high-performance & cost-effective motors that are perfect for both racers and freestylers. The Sword Motor comes in three variations: 1850kv, 1950kv & 2050kv. An innovative design and optimized manufacturing processes have created an incredibly affordable product without sacrificing quality or performance. Not to mention the precision and power delivered by the Sword Motor, making it the ideal choice for FPV enthusiasts looking to take their skills up a notch. Conquer the skies & unlock new FPV dimensions with this unbeatable powerhouse. Experience the thrill of flying with the Sword Motor!
Check out our vast brushless motors selection, and our FlyFishRC product selection!
Features
High-strength steel shaft
Ingenious non-slip structure of the prop seat
220°C high temperature resistant copper wire
NMB imported bearings and N52SH magnets
Thickened motor base and wire outlet protection braces
High-precision manufacturing and assembly process
Strict dynamic balance and performance QC
Specifications
Model: Sword 2207 Black
KV: 2050
Input Voltage: 4S Lipo
Configuration: 12N14P
Shaft diameter: 4mm
Motor dimensions (Dia x Len): 26.9x32.4mm
Weight: 34.4g with short wire
Wire length: 20AWG 150mm
Mounting pattern: 16x16mm
Includes
1x FlyFishRC Sword 2207 2050Kv Motor (Non-Unibell) - Black
If you are looking for the next quality ultra-light 5" frame, look no further than the Tony 5!
Check out what FlyFishRC has to say about their frame!
FlyFishRC is excited to introduce a new addition to the relatively fresh sub-250g 5” freestyle drone category - the FlyFishRC Tony!In this modern era, where our hobby meets with aircraft weight restrictions, flying drones larger than 3” has become increasingly challenging. However, we all love a rip on a good old 5” drone, don't we? That's why we believed it was the perfect time to create an exceptionally lightweight 5-inch frame with the potential to craft a sub-250g 5” drone. And that's how Tony came to life.Our objectives were clear: create a lightweight frame with excellent flight characteristics and durability. While these aims are relatively straightforward with a standard 5-inch frame, working with a sub-250g 5” frame is an entirely different animal. We won't pretend that this frame was developed without any compromises, but we've given our all to make it a frame you'll eagerly take out to fly day after day!Tony is a straightforward and easy-to-build platform, fully O3-ready, equipped with our signature CNC aluminum camera plates to ensure your valuable camera remains maximally protected during all types of crashes. It's also compatible with analog cameras, VTX, as well as the HDZERO and Walksnail HD systems (Please verify dimensions for compatibility with all VTXs).We highly recommend using AIO flight controllers to keep the weight as light as possible, although a 20x20 mini stack will also work well.For instance, to achieve a sub-250g configuration in our test builds, we utilized a 40A AIO FC, CADDX Vista Nebula Pro, 2004 FlyFishRC Flash motors, TBS Crossfire Nano, bi-blade HQ props, GNB HV 380mAh 6S battery, and one battery strap, resulting in an all-up weight of 248.7g.However, if your intention is to use this frame with the DJI O3 system, the all-up weight of such a setup will increase to around 260g, as the O3 is notably heavier than the Vista. In this case, if staying under 250g is crucial, you might contemplate using a 4S version of the same battery or stripping down the O3 to shave off some of the excess weight.Overall, Tony is an exciting frame that offers an incredibly enjoyable flying experience. It provides a distinct feeling of being nimble yet not overly floaty due to its lightness. Get your own Tony today and share your feedback online; we'd love to hear about your experience!Anyway...- WHAT’S YOUR NAME?!- TONYYYYY!
Check out our other 5" frames as well as the rest of our FlyFishRC products selection!
Features
Only 57g (w/TPU)
Sub250g capable
High structural strength
High-end T700 carbon fiber
CNC aluminum camera plates
Silicone shock-absorbers for O3 AU
Compatible with both 19/20mm cameras
Compatible with most VTX
Compact body, well suited for freestyle
Equipped with all accessories needed for analog and HD builds
12.9-grade strength hardware with Loctite threadlocker pre-applied
Specifications
Model: Tony 5
Geometry: True-X
Wheelbase:215mm
Arm thickness: 4mm
Top plate thickness: 2mm
Middle plate thickness: 2mm
Bottom plate thickness: 2mm
Propeller size: 5inch
CNC plate thickness: 4mm
FPV cam spacing: 19mm/20mm
Weight: 57g(with TPU parts)
Total Dimensions:133.7mmx168x29mm
Stack mounting holes: 20mmx20mm/25.5mmx25.5.5mm(M3)
VTX mounting holes: 20mmx20mm/25.5mmx25.5mm(M2)
Includes
1x FlyFishRC Tony 5 5" Freestyle Frame Kit - Sub250
From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at RaceDayQuads present you the Flywoo Explorer LR HD. Small, long-range, lightweight, and a DJI O3 FPV Air Unit, now that is a recipe for fun. This quad features the GOKU Versatile F405 Pro Mini Stack, NIN 1404 V2 2750KV Motors, and V3.0 GPS.
Want a guide for this drone, well here you go: Drone Guide
Check out our other DJI O3 Compatible Quads, and also see our other great products from Flywoo!
Features
Long-range capabilities up to 10KM (FCC)
Newest GOKU MINI GPS V3 for Explorer O3
GPS search up to 30 satellites
Plug&Play plug O3 Air unit. Hence there is no need to solder
4K/60fps recording for high-quality footage
Latest GOKU MINI GPS V3 for greater accuracy
Compact and lightweight design, weighing less than 250g even with the battery
Long flight time of up to 30 minutes
User-friendly controls for easy operation
DJI O3 FPV AIR UNITThe DJI O3 Air Unit integrates DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!GOKU GM10 MINI GPS V3.0The V3.0 GPS allows for up to 30 satellites to be searched, making the rescue function more reliable. Safeguard your cruise flight with a built-in buzzer and up to 5 hours of standby.PRE-TUNED AND PRE-SETUPThis RTF is fully built and test-flown by build technicians at Flywoo.
Specifications
FC and ESC : Goku Versatile F405 Pro Mini Stack - F405 FC + 40A ESC
Frame: Explorer LR 4 03 (Different from OG Explorer LR frame)
Model: Explorer LR 4 HD DJI 03
Propellers: Gemfan 4024 2-Blade
Motors: NIN 1404 V2 2750Kv
Antenna: DJI 03 antenna
VTX: DJI 03 Air Unit
Wheelbase: 168mm
Camera: DJI 03
Brand: FLYWOO
Weight: 168.4g
GOKU GN F405 Pro Mini 40A 20x20 Stack
GOKU Versatile F405 PRO FC
Input Voltage: 2-6S Lipo
MCU: STM32F405BGA
GYRO: ICM42688P
UARTS: 1/2/3/4/5/6
I2C: SCL/SDA
Barometer: BMP280
BEC: 5V 2A / 10V 2A
Blackbox: 16M
Input Voltage: 2-6S
Firmware: FLYWOOF405PRO
Mounting: 20x20mm M3 / 30x30mm M4
ESC Soft: Dshot300/600
ESC Telemetry: Yes
LED Controller: BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes
GOKU 406S 8bit 40A ESC
Con. Current: 40A
Burst Current: 45A
Input Voltage: 2-6S
Support DShot300/600
Current Sensor: YES
BEC Output: NO
Size: 42×42×4mm
Mounting Hole: 20x20mm ( M3)
FPV System
VTX: DJI O3 Air Unit (Requires DJI Goggles 2 or DJI FPV Goggles V2)
Channels: : Auto mode support Manual mode support: 40 MHz: 1 channel; 20MHz: 3 channels; 10MHz: 3channels
Camera: DJI O3 Air Unit Camera
VTX Antenna: DJI O3 Air Unit Antenna
Includes
1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ DJI O3 Air Unit - ELRS
2x Gemfan 4024-2 Black Propellers (Set of 4)
2x Battery Strap 15x180mm
1x Hardware Set
This Flywoo BNF Explorer LR 4" HD 4S Quad comes with Walksnail Avatar V2 & Avatar Micro Cam V2, giving you buttery smooth and stabilized video performance. The advanced quadcopter technology lets you take your FPV adventures to new heights! Choose your receiver between ELRS 2.4GHz and TBS CRSF 915 Mhz for a secure flight. Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology! This long range quad is a small efficient cruiser with a deadcat design eliminating props in your view, perfect for the elite capabilities of the Walksnail system.
Be sure to check out our Bind-n-Fly collection and our Walksnail Compatible Quads and Electronics as well as other great products from Flywoo!
Features
Compact and lightweight design, weighing less than 250g even with the battery
Long flight time of up to 30 minutes
User-friendly controls for easy operation
Support 1080P 120fps Recording
Latency Average Delay 22ms
Walksnail Avatar V2 Kit 8G ( Camera & VTX)
Walksnail WS-M181 GPS: Featuring the u-blox M10 platform UBX-M10050 GNSS chipset and BUILT-IN QMC5883 MAG, the module offers stronger performance and more accurate positioning.
Specification
Model: Explorer LR 4 HD Walksnail Sub250 Micro Long Range
Brand: FLYWOO
Frame: Explorer LR 4 HD Walksnail Frame kit
FC and ESC: Goku Versatile F405 Pro Mini Stack ( F405 FC+ 40A ESC )
VTX & Cam: Walksnail Avatar HD Kit V2 (8G)
Propeller: Gemfan Hurricane 4024 2
Antenna: Flywoo Circular Polarized 5.8GHz UFL Antenna - LHCP
Motor: NIN 1404 V2 ULTRALIGHT FPV MOTOR
Weight: 168.4g
Flight Controller Specifications
MCU: STM32F405BGA
GYRO: ICM42688P
UARTS: 1/2/3/4/5/6
I2C: SCL/SDA
Barometer: BMP280
BEC: 5V 2A / 10V 2A
Blackbox: 16M
Input Voltage: 2-6S
Firmware: FLYWOOF405PRO
Mounting: 20x20mm M3 / 30x30mm M4
ESC Soft: Dshot300/600
ESC Telemetry: Yes
LED Controller: BF LED
F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 2~6S Lipo (8.4~25.2V)
TVS Protection: Yes
ESC Specifications
Con. Current: 40A
Burst Current: 45A
Input Voltage: 2-6S
Support: DShot300/600
Current Sensor: YES
BEC Output: NO
Size: 42x42x4mm
Mounting Hole: 20x20mm ( M3)
Motor Specifications
Kv: 2750Kv
Input Voltage: 4-6S
Stator diameter: 14mm
Stator height: 4mm
Bearings: NSK
Wire Length: 24AWG 150mm
Shaft size: 1.5mm
Mounting Screw Pattern: 12x12 mm
Weight: 8.7g
VTX Specifications
Communication Frequency: 5.725-5.850GHz
Transmitter Power(EIRP): FCC<30dBm;CE:<14dBm;SRRC:<20dBm;
MIC:<25dBm
1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
Mounting Holes: 25.5x25.5mm; 20x20mm
Dimensions: 33.5x33.5x10.5mm
Storage: 8G
Recording: 1080p/720p
Weight: 17.6g
Operating Temperature: -20-40℃
Channels: 8
Wide Power Input: 6V-25.2V
Supported FC System: Betaflight; Inav; Fettec; ArduPilot; Kiss
OSD: Canvas mode
Latency Average delay: 22ms
Antenna Connector: U.FL
Camera Specifications
Model Avatar: V2 camera
Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility
Ratio: 4:3 native /16:9
Lens: 2.1mm
FOV: 160°
Aperture: F2.0
Shutter: Rolling shutter
Min.Illumination: 0.001Lux
Weight: 7.2g
Dimensions: 19x19x22mm
Coaxial Cable: 140mm
Prop Specifications
Diameter: 4"
Pitch: 2.4"
Blades: 2
Material: Polycarbonate
Disk Diameter: 102.33mm
Max Prop Width: 13.38mm
Hub Thickness: 5.5mm
Shaft Hole: 1.5mm
Weight: 1.61g
Antenna Specifications
Gain: 2.2dBi
Axial ratio: 1.0 Around
Band Width: 5.6Ghz – 6.2GHz
Axial Ratio: Around 1.0
Polarization: LHCP
Connector: UFL
Weight: 1.6g
Include
1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ Walksnail Avatar V2 & Avatar Micro Cam V2 - Choose Your Receiver
1x Hardware Kit
8x Gemfan 4024-Bi Blade Balck
2x Battery strap 15x180mm
1x Set of screws
In an effort to push the boundaries of carrying the camera on the smallest platform, Flywoo designed the smallest quadcopter possible in their history. The Firefly Baby Quad is a nano-sized FPV drone designed to carry an Insta360 Go, or SMO 4K cameras for some action flying. Weighing in at just 47g, the Firefly Baby Quad is small, flexible, and stable. It's full of power and offers unmatched control. Pilots can quietly enjoy the fun of shooting a video without jello. Perfect for the indoor and outdoor recording of every beautiful flying moment!
Check out our other pre-built quads, as well as other great products from Flywoo!
Specifications
Weight: 47g
Wheelbase: 80mm
FC & ESC : GOKU GN405 Nano 13A STACK ( 16x16 )
Frame: Firefly Baby Quad Frame (Analog Verison)
Motors: Nin V2 1203Pro 5500KV
Props: Gemfan 1636 40mm-4 V2.0
VTX: Goku VTX625 450mw
Antenna: Atomic 5.8GHz Antenna Length 30mm (RHCP)
Battery: 4S 450mAh / 4S 300mAh battery (Not including)
Flywoo GOKU GN405 NanoFlight Controller
MCU: STM32F405 BGA
IMU: ICM42688
UARTS: 6
Soft Serial Ports: 2
I2C: Yes
Onboard LED：WS2812x8(FCx4/ESCx4)
Supports: SBUS, iBus, Spektrum, Crossfire
BlackBox: 16Mb Flash
BEC: 5V Power Out: 2.0A max, 3.3V Power Out: 0.5A max
Dimensions: 22x22mm
Mounting Holes: 16x16mm
Weight: 2.3g
Flywoo GOKU BS13A 4in1 ESC
Support: Oneshot, Multishot, Dshot150, Dshot300, Dshot600
Input Voltage: 2-4S Lipo
Continuous Current: 13A
Firmware: BLHELI_S
Mounting Pattern: 16x16mm, M3 Hole
Weight: 2.5g
Nin V2 Motor
Stator Size: 1203
KV: 5500
Goku VTX625 450mw
Raceband: 5362-5945 MHZ
Power: PIT/25/50/100/200/450mW switchable
Input Voltage: 5V
Control Mode: IRC Tramp(RX) & Button
Video System: NTSC/PAL
Antenna: IPEX (U.FL)
Size: 30mmx30mmx4mm
Weight: 1.3g
Includes
1x Flywoo BNF Firefly Baby V1.3 4S 1.6" Analog Micro Quad - Choose Receiver
Flywoo's Firefly Hex Nano V1.2 is the smallest hexacopter ever designed by Flywoo, weighing in at 74g. It powerfully and stably carries Insta 360go and SMO 4K cameras. The Firefly hex nano is small, flexible, stable, and is full of power and offers unmatched control.
Check out our other pre-built quads, as well as other great products from Flywoo!
Feature
Hexacopter
HD system
Naked Vista
Weighing only 74 grams
Built in SMO Power Cable
Prebuilt and tested
Specifications
Weight: 74g
Wheelbase: 80mm
FC & ESC:【No.C203】GOKU HEX F4 16x16 STACK - ( FC+13A ESC ) ( MPU6000)
Frame: Firefly Baby Quad Frame (HD Verison)
Motors: Nin V2 1203Pro 5500Kv
Props: Gemfan 1636 40mm-4 V2.0
HD digital camera & VTX: Naked RunCam Link & RunCam Wasp
Antenna: Atomic 5.8GHz Antenna Length 30mm (LHCP)
Battery (Recommended): 4S 450mAh / 4S 300mAh battery (Not including)
GOKU HEX GN405 Nano16X16 FC
MCU: STM32F405 BGA
IMU: ICM42688P
Barometer: DPS310
input voltage： 2-6S
Onboard LED：WS2812x4
6 hardware UARTS (UART1,2,3,4,5,6)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only.
PPM and PWM receivers are not supported.
Onboard 16Mbytes for Blackbox logging
5V Power Out: 2.0A max
3.3V Power Out: 0.5A max
Dimensions: 22x22mm
Mounting Holes: 16x16mm
Weight: 2.3g
Firmware : FLYWOOF405NANO
BS13A BLheli_S 2-4S 4in1
lBS20/35A BLheli_S 2-6S 4in1
Weight: 2.5g
Mounting Hole: 16x16mm (M3)
Support Oneshot, Multishot,
DShot150/300/600
Nin V2 Motor
Stator Size: 1203
Motor Bolt Pattern: 9x9mm
KV: 5500
Wasp Nano HD Camera
Dimensions: L18mmxW14mmxH18mm
LENS: FOV D:160° H:127° V:92°
Resolution: 720P@120fps(4:3)
Net Weight: 6g(With Cable)
Shutter: Rolling Shutter
Coaxial Cable: 80 mm
Image Sensor: 1/3"
Naked Link Air Unit
Input Voltage: 7.4-26.4V@ 4-9W
Operating Frequency: 5.725-5.850 GHz
Transmitter Power: (EIRP) FCC/SRRC: <30 dBm; CE: <14 dBm
Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
Max. Transmission Distance: FCC/SRRC: 4 km; CE: 0.7 km;
I/O Interface: Type-C, IPEX, 3-in-1 port,
Supported Flight Control System: BetaFlight
Operating Temperature Range: 0° to 40° C (32° to 104° F)
Includes
1x Flywoo BNF Firefly Hex Nano V1.2 1.6" HD 4S Micro Quad w/ Naked RunCam Link & RunCam Wasp - Choose Receiver
1x Accessories (props, prop guard, RunCam link shell, battery straps, hardware, ect)
Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card.
The CineRace is a double duct design, not a simple guard anymore. It can fly as flexibly as a racing drone, and as stable as Cinewhoop. All in all, this is a drone that can not only race but also capture stable videos and at the same time achieve a super long flight time! A specially designed GM10 Nano V3 GPS module is tailored to fit the CineRace20, providing minimal weight but the ability to search up to 30 satellites. You will see on the front of the quad Flywoo engineer the use of the soft TPU material to mount the camera to prevent the jello effect, by reducing the over all vibrations in the quad.
Come see our Cinewhoop Collection and other great products from Flywoo!
We also carry a version with the O3 Air Unit already installed here.
Features
Almost all parts are injection molded for a more sturdy and durable quad.
Very easy to disassemble, only fixed by two aluminum columns
Customizable with LEDs
GPS up to 30 satellites
Innovative duct design
Sub250 (even with battery)
Specifications
Input Voltage: 4S
Model: CineRace20 HD DJI O3 2inch (without Air Unit)
Brand: FLYWOO
Frame: CineRace20 O3 (Different fromCineRace20 V1.2\V2 frame )
Charge connector: XT30
Motor: NIN V2 1203PRO 4850Kv
Propeller: D51-5 51mm
Buzzer : 5PCS Active Alarm Buzzer
GPS: GOKU GM10 Nano V3 GPS
Weight: 139g (without battery)
Betaflight Firmware target: FLWO/FLYWOOF405S_AIO(SMT32F405)
Recommended Battery:Explorer 450mah 4S ( flight time 5mins ) Explorer 750mah 4S ( flight time 6mins )
GOKU GN F405S 20A AIO
Input Voltage: 2-6S Lipo
MCU: STM32F405 BGA
IMU: ICM42688
OSD: BetaFlight OSD
Blackbox: 16Mb Flash
Baro: BMP280
BEC: 5V
6 hardware UARTS (UART1,2,3,4,5,6)
Onboard LED：4x WS2812
Support BLHELI_S
Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600
FPV System
Add your own O3 Air Unit
Includes
1 x Flywoo CineRace20 HD V2 Neon LED 4S Cinewhoop (without O3 Unit) - PNP
8 x D51-5 props
2 x Battery strap 9x150mm \ 9x200mm
1 x Set of screws
1 x 90° USB Type-C
Experience long-range cruising with the Flywoo Explorer LR Analog Frame Kit, a collaboration between Flywoo and Dave_C FPV, this ultra-light 4" frame is designed to help you push your FPV skills to the max, without compromising on noise and portability. Made with 100% 3K carbon fiber and 7075 aluminum alloy, the Explorer LR lets you take off and enjoy the thrill of a long-range FPV adventure.
Check out the rest of our 4" frames, as well as other great products from Flywoo!
Specifications
Thickness of arms: 3mm
Thickness of top plate: 1.5mm
Thickness of bottom plate: 1.5mm
Weight: 41g
Electronic Mounting: 16x16mm, 20x20mm
VTX Mounting: 16x16mm, 20x20, 25.5x25.5mm
Motor Bolt Pattern: 9x9mm, 12x12mm
Material: 100% 3K carbon fiber, 7075 aluminium alloy
Message from Dave_C FPV:
"For me personally, Long Range cruising through epic landscapes is the best thing about FPV! But unfortunately, it was always kind of difficult to practice legally and without bothering people with all the noise a massive 6 or 7" long-range quad produces.
So the basic idea behind the original Project #MicroLongRange was born: Scale down a 7" long-range quad until it is below 250g take-off weight. With the support of an awesome community on Facebook and Instagram as well as a massive development effort by Flywoo, this concept has seen a lot of improvements that are now all implemented in the Explorer LR!
This tiny quad is equipped with GPS, Crossfire, and an independent model finder to give you the necessary confidence to push it to the maximum range of digital and analog video transmission. The powertrain with its GOKU 16x16 stack and the all-new 2700kV 1404 motors spinning 4" props is optimized for maximum efficiency and low weight: Flight times of way over ten minutes on a regular 850mah 4S LiPo battery are easily achievable! Cruising speeds of 40-50 kph (25-30mph) are astonishingly high for such a small quad and have allowed me to do 10km (6 miles) round trips easily. And the best thing about it: It's incredibly quiet! You will barely be able to hear it flying by as soon as you are a few dozen meters away. ”
----- Dave_C FPV
Includes
1x Flywoo Explorer LR 4" Walksnail Long Range Frame kit
1x Black TPU 3D Printed Parts
1x M2x5: 8pcs
1x M2x7: 8pcs
1x M2x8: 6pcs
1x M2x12:12pcs
1x Aluminum Standoffs M2*20: 4pcs
1x Aluminum Standoffs M2*25: 2pcs
1x TPU 3D Printed Parts :1 package
1x Flywoo Atomic 5.8G UFL Ant 1 ( RHCP )
Experience long-range cruising with the Flywoo Explorer LR HD Frame Kit, a collaboration between Flywoo and Dave_C FPV, this ultra-light 4" frame is designed to help you push your FPV skills to the max, without compromising on noise and portability. Made with 100% 3K carbon fiber and 7075 aluminum alloy, the Explorer LR lets you take off and enjoy the thrill of a long-range FPV adventure.
Check out the rest of our 4" frames, as well as other great products from Flywoo!
Specifications
Thickness of arms: 3mm
Thickness of top plate: 1.5mm
Thickness of bottom plate: 1.5mm
Weight: 41g
Electronic Mounting: 16x16mm, 20x20mm
VTX Mounting: 16x16mm, 20x20, 25.5x25.5mm
Motor Bolt Pattern: 9x9mm, 12x12mm
Material: 100% 3K carbon fiber, 7075 aluminium alloy
Message from Dave_C FPV:
"For me personally, Long Range cruising through epic landscapes is the best thing about FPV! But unfortunately, it was always kind of difficult to practice legally and without bothering people with all the noise a massive 6 or 7" long-range quad produces.
So the basic idea behind the original Project #MicroLongRange was born: Scale down a 7" long-range quad until it is below 250g take-off weight. With the support of an awesome community on Facebook and Instagram as well as a massive development effort by Flywoo, this concept has seen a lot of improvements that are now all implemented in the Explorer LR!
This tiny quad is equipped with GPS, Crossfire, and an independent model finder to give you the necessary confidence to push it to the maximum range of digital and analog video transmission. The powertrain with its GOKU 16x16 stack and the all-new 2700kV 1404 motors spinning 4" props is optimized for maximum efficiency and low weight: Flight times of way over ten minutes on a regular 850mah 4S LiPo battery are easily achievable! Cruising speeds of 40-50 kph (25-30mph) are astonishingly high for such a small quad and have allowed me to do 10km (6 miles) round trips easily. And the best thing about it: It's incredibly quiet! You will barely be able to hear it flying by as soon as you are a few dozen meters away. ”
----- Dave_C FPV
Includes
1x Flywoo Explorer LR 4" Walksnail Long Range Frame kit
1x Black TPU 3D Printed Parts
1x M2x5: 8pcs
1x M2x7: 8pcs
1x M2x8: 6pcs
1x M2x12:12pcs
1x Aluminum Standoffs M2x20: 4pcs
1x Aluminum Standoffs M2x25: 2pcs
1x TPU 3D Printed Parts :1 package
1x Flywoo Atomic 5.8G UFL Ant 1 ( LHCP)
