Fort Myers Florida Location Is Now Open!

10580 Colonial Boulevard, #112, Fort Myers, Florida 33913

Kyosho R/C Vehicles

92 products


  • KYOFAT703M, Kyosho Fazer FZ02 Vintage TC Sedan Tires (2) (Medium)

    KYOSHO KYOFAT703M, Kyosho Fazer FZ02 Vintage TC Sedan Tires (2) (Medium)

    5 in stock

    KYOFAT703M, Kyosho Fazer FZ02 Vintage TC Sedan Tires (2) (Medium) This set of Kyosho Fazer Vintage Sedan Tires is intended for use with Fazer Mk2 kits. This package includes two tires with inserts. This product was added to our catalog on March 23, 2021

    5 in stock

    $19.99

  • KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger

    KYOSHO KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger

    6 in stock

    KYO40211, Kyosho Wave Chopper 2.0 Type 2 Electric Watercraft w/KT-231P 2.4GHz Transmitter, Battery & Charger The Kyosho Wave Chopper 2.0 Type 1 Electric Personal Water Craft brings fun to the water with the revival of the Wave Chopper! Originally released in 2001, the Wave Chopper 2.0 features modern RC technology and performance. A redesigned rudder, stern tube and motor mount in the 1/6th hull, and an updated rider figure are combined with the latest RC components to take this model into the next generation. Optimal torque from the G14L water cooled 550 class motor works perfectly with the large capacity Kyosho Speed House KA60-91W speed controller to deliver crisp acceleration and racy performance while reducing heat loss. Styrene floats provide buoyancy that make the hull unsinkable, even if it is not completely waterproof. The hull and rider are pre-assembled, so all you need to do is install four AA batteries (sold separately) into the transmitter, charge the included NiMH battery, and mount the rider figure to get this model fully ready to run.  Features: Kick up rudder protects both the rudder and hull from unexpected contact and delivers smooth turning performance Built in water intake channels water into the cooling jacket on the motor for effective cooling Optimal angle of the stern tube along the bottom of the hull reduces drive resistance allowing the fully submerged propeller to generate quick and smooth acceleration Pre-installed 550 class G14L motor is fitted with a water cooling system to prevent heat loss High rigidity suspended motor mount maximizes drive efficiency and easy maintenance 7.2V 2200mah battery and USB delte peak charger are included with the pre-assembled hull and 2.4ghz transmitter Specifications: Length: 595mm Width: 220mm Height: 350mm Weight: 1,600g approx. Transmitter: KT-231P+ ESC: KYOSHO SPEED HOUSE KA060-91W         Servo: KS4031-06W Motor: 550-class G14L motor with water-cooling jacket Battery: 7.2V-2200mAh NiMH Compatible battery size: 148x52x30mm or less (LxWxH) Charger: Ni-MH battery dedicated USB charger Propeller: D31xP1.4 (Polycarbonate) Maximum speed: 24km/h approx. Operation time: 5 min approx. Includes: Fully assembled hull Syncro KT231P+ transmitter Injection molded boat stand Pre painted figure Hex wrenches 1.5 & 2.5mm Spanner 4.0 & 5.5mm Antenna tube 7.2V 2200 mAh Ni-MH battery and USB delta peak charger PVC tape for waterproofing Needed to Complete: (4) AA batteries for transmitter This product was added to our catalog on May 3, 2023

    6 in stock

    $249.99

  • KYO70707, 14T Single 550 Class G-Series Brushed Motor G14L

    KYOSHO KYO70707, 14T Single 550 Class G-Series Brushed Motor G14L

    3 in stock

    KYO70707, 14T Single 550 Class G-Series Brushed Motor G14L This product was added to our catalog on December 16, 2021

    3 in stock

    $19.99

  • KYO34472T1, Fazer Mk2 2005 Ford Mustang GT, 1/10 Electric 4WD Touring Car KYO34472T1, Fazer Mk2 2005 Ford Mustang GT, 1/10 Electric 4WD Touring Car

    KYOSHO KYO34472T1, Fazer Mk2 2005 Ford Mustang GT, 1/10 Electric 4WD Touring Car

    Out of stock

    KYO34472T1, Fazer Mk2 2005 Ford Mustang GT, 1/10 Electric 4WD Touring Car The Kyosho Fazer Mk2 FZ02 2005 Ford Mustang GT-R ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car LED light unit (KYO97054 - not included) can be attached to the front and rear light buckets, making it even more realistic Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Shaft drive full-time 4WD touring chassis Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale Button head hex screws throughout to simplify maintenance Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T Performance can be further enhanced by installing various optional parts Specifications: Length: 450mm Width: 195mm (Body width:200mm) Height: 136mm Chassis Height: 8mm (approx.) Wheelbase: 260mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V battery w/T-Style plug for chassis  Charger for battery  Tools This product was added to our catalog on July 19, 2022  

    Out of stock

    $219.99

  • RCE1640, 3" (76mm) Universal Servo Extension 22AWG

    KYOSHO RCE1640, 3" (76mm) Universal Servo Extension 22AWG

    Out of stock

    Racer's Edge servo extensions feature a JR-style male plug and FUT-style female plug for a truly universal solution. Precision manufactured with gold-plated pins and robust yet flexible 22-gauge wire.

    Out of stock

    $2.99

  • KYO34424, Kyosho Fazer Mk2 Mercedes AMG GT3 ReadySet 1/10 4WD Electric Touring Car w/Syncro KT-231P Radio KYO34424, Kyosho Fazer Mk2 Mercedes AMG GT3 ReadySet 1/10 4WD Electric Touring Car w/Syncro KT-231P Radio

    KYOSHO KYO34424, Kyosho Fazer Mk2 Mercedes AMG GT3 ReadySet 1/10 4WD Electric Touring Car w/Syncro KT-231P Radio

    2 in stock

    KYO34424, Kyosho Fazer Mk2 Mercedes AMG GT3 ReadySet 1/10 4WD Electric Touring Car w/Syncro KT-231P Radio The Kyosho Fazer Mk2 Mercedes AMG GT3 ReadySet 1/10 4WD Electric Touring Car was developed for the pure enjoyment of R/C car driving. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: "Ultra Scale Body" replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. Large size dog bones and cup joints realize superior reliability and durability. Full ball bearings that reduce drive loss equipped throughout the drive system. Includes completely finished body with color scheme and decals applied. Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. Specifications: Length: 464mm Width: 200mm Wheelbase: 260mm Tread (F/R): F:174mm / R:174mm Tires (F/R): F:66×25mm / R:66×25mm Gear Ratio: 6.5:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: 550 G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof ESC (forward/brake/reverse) Hex wrench Spanner Needed to Complete: (4) AA batteries for transmitter Battery and charger for chassis Tools This product was added to our catalog on September 8, 2021

    2 in stock

    $259.99

  • KYO34415T1B, Kyosho EP Fazer Mk2 FZ02L 2015 Dodge SRT Challenger Hellcat ReadySet (Purple) w/Syncro KT-231P Radio KYO34415T1B, Kyosho EP Fazer Mk2 FZ02L 2015 Dodge SRT Challenger Hellcat ReadySet (Purple) w/Syncro KT-231P Radio

    KYOSHO KYO34415T1B, Kyosho EP Fazer Mk2 FZ02L 2015 Dodge SRT Challenger Hellcat ReadySet (Purple) w/Syncro KT-231P Radio

    Out of stock

    KYO34415T1B, Kyosho EP Fazer Mk2 FZ02L 2015 Dodge SRT Challenger Hellcat ReadySet (Purple) w/Syncro KT-231P Radio The Kyosho 2015 Dodge SRT Challenger Hellcat Fazer Mk2 ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through updated materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter for operation. Features: Updated design shaft drive full-time 4WD touring chassis (FZ02L). Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. Comes with the powerful 550 size 14T brushed motor(G14L). The long can with Steel ring and internal cooling fan provides efficient torque and high speeds. Equipped with 2-bevel grease-filled gear diffs on front and rear. Large sized dog bones and cup joints provide excellent reliability and durability. Strap battery mounting allows for various battery types to be used. Full ball bearings equipped throughout the drive system. Features KS202W waterproof steering servo. Includes completely finished body with color scheme and decals applied. Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. Performance can be further enhanced by installing various optional parts. Specifications: Length: 486mm Width: 200mm Wheelbase: 274mm Tread (F/R): F:174mm / R:174mm Tires (F/R): F:66×25mm / R:66×25mm Gear Ratio: 6.5:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: 550 G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof ESC (forward/brake/reverse) Hex wrench Spanner Needed to Complete: (4) "AA" Batteries (for transmitter) 2S LiPo Battery w/T-Style Connector  (or, 6 or 7-Cell NiMH Battery w/T-Style) Compatible Battery Charger NOTE: Model shown equipped with battery pack for illustrative purposes only and is not included. This product was added to our catalog on February 11, 2021

    Out of stock

    $239.99

  • KYO34491T1, 1/10 4WD Fazer Mk2 Mad Van VE KYO34491T1, 1/10 4WD Fazer Mk2 Mad Van VE

    KYOSHO KYO34491T1, 1/10 4WD Fazer Mk2 Mad Van VE

    Out of stock

    KYO34491T1, 1/10 4WD Fazer Mk2 Mad Van VE Enhanced scale features of the American street van styled FAZER Mk2 MAD VAN are combined with a 50% increase in maximum speed due to the change to brushless motor power in this 1/10 scale VE model. In place of the conventional G14L brushed motor, this model combines the powerful TORX 10E brushless motor with BRAINZ 10 speed controller to lift the maximum speed from 40km/h to 60km/h. To manage the extra power and RPM, gears have been reinforced and reduction ratio optimized on the FZ02L-BT chassis base, which now incorporates the previously optional aluminum HD center shaft L. In addition to chassis improvements, the body styling has also received a 3-D enhancement with molded resin grille and lights replacing decals, and a roof guard has been added to protect the body from rollovers. With elevated performance and appearance, you can experience the exhilaration of running wild at high speed with the MAD VAN VE.Long-type upper and lower suspension arms equipped with oil shocks for front and rear provide a sufficient stroke and secure damping force. Ball-connected left-right interchangeable steering knuckles realize smooth operation and crash resistance. Aluminum HD center shaft (No. FAW210) is standard equipment to support the power of brushless motor.The TORX 10E brushless motor generates enough power for gentle wheelies with the big body and tires. Sealed motorcase prevents dirt and dust from getting into the motor and gearbox.Includes BRAINZ 10 speed controller equipped with cooling fan, for brushless motors. Able to be programmed for specific purposes.Gearbox incorporates high-strength sintered metal gears. In addition to new material, the final gear ratio has been changed to low gear to fully utilize the power of the brushless motor. The machined steel pinion gear has also been strengthened.Large diameter tires produce high grip on any road surface. The kit comes with pre-glued wheels so you can hit the ground running. To match the new-look chassis, wheels have been changed to white and match nicely with the body.VE model features a wheelie bar to prevent flipping over when doing wheelies. With the power of the brushless motor, the dynamic acceleration lifts the front wheels and the chassis runs on its rear wheels (wheelie). Features: Pre-assembled chassis is sold as a Readyset including installed R/C system and pistol-grip transmitter. Battery for the chassis and charger are sold separately Includes Syncro KT-231P+ pistol-grip transmitter with various custom setting adjustments Robust construction of the full-time 4WD FZ02L-BT chassis is tough enough to handle the hard punishment of rough-road bashing Full ball bearing specifications improve drive efficiency and durability Includes American-style van body that has been enhanced with an even greater level of scale detail. Equipped with Front and Rear light buckets compatible with optional No. 97054-4CR LED Light unit which is sold separately.By installing the LED light unit, improves scale realism for body shell. Specifications: Length 460mm Width 323mm Height 197mm Wheelbase 274mm Gear Ratio 11.803:1 Tires (F/R) F:110x70mm/R:110x70mm  

    Out of stock

    $289.99

  • KYO34416T2, 1/10 EP Fazer Mk2 1970 Chevy Chevelle SS 454 LS6, Tuxedo Black - RTR KYO34416T2, 1/10 EP Fazer Mk2 1970 Chevy Chevelle SS 454 LS6, Tuxedo Black - RTR

    KYOSHO KYO34416T2, 1/10 EP Fazer Mk2 1970 Chevy Chevelle SS 454 LS6, Tuxedo Black - RTR

    2 in stock

    KYO34416T2, 1/10 EP Fazer Mk2 1970 Chevy Chevelle SS 454 LS6, Tuxedo Black - RTR Features1.) New Fazer Mk2 Chassis!! New simple and efficient shaft driven 4WD design with improved performance performance. Light weight and low C of G bathtub style design made of durable glass reinforced 66 nylon material.2.) Licensed 1970 Chevy Chevelle SS 454 LS 6 BodyBody!! Molde d headlight / grill with light buckets(LED compatible).3.) New complex true to scale 2pcs body with injecinjection molded parts like front and rear grills, side mirrors, fuel caps, etc etc.4.) New scale vintage wheel design with brake rotor parts!! Also includes 0mm offset rotor hubs(Allowing 190mm width)!! New chrome plated wheels for true scale.5.) New high grip old school radial tires!!6.) New steering and double wishbone suspe nsion design for superior handling and damping characteristics. Plastic made of durable glass reinforced 66 nylon material. Adjustable caster angle(3 settings settings).7.) 12mm big bore shocks.8.) Reliable shaft d driven 4WD drive train design with slipper clutch.9.) 2 bevel gear type diff system on front and rear.10.) Easy gear mesh system(22T 30T)30T). Stock pinion is 22T.11.) New p owerful Kyosho original 550 size 14T brushed motor12.) N ew Kyosho Speed House KA060 91W water proof brushed 60A ESC with Super plug connectors. 2S LiPo compatible.13.) New high response high torque KS 4081 04 WP water proof steering servo14.) Utilizes a longer wheelbase chassis for more stability and scale appearance.15.) New shock design and soft shock spring setup16.) New RX box to protect from dust and debri s17.) New Sy ncro 2.4GHz KT2 31P Radio system18.) All hex hardware19.) Full ball racedTECHNICAL DATALength: 484 mm, Width: 210 mm, Wheelbase: 274 mm, Tread: 167 mm (F) / 167 mm(R) Tire Width : 277 mm, Tire Diameter: 64 mm Weight Approx 165 0g Gear Ratio: 6.54:1 Top Speed : 40km / h Run Time : 15 minREADYSET CONTENTSFactory assembled chassis with graphics Servo (KS 4081 04 WP ) SYNCRO KT 231P transmitter and KR 331 Receiver unit Kyosho KA060 91W ESC and 1 4T motorREQUIRED FOR OPERATION4 x AA battery for Transmitter 7.2V 8.4V NiMh or 7.4 LiPo battery and charger

    2 in stock

    $239.99

  • KYOFAW205, Kyosho FZ02 HD Front Hub Set (Red) KYOFAW205, Kyosho FZ02 HD Front Hub Set (Red)

    KYOSHO KYOFAW205, Kyosho FZ02 HD Front Hub Set (Red)

    3 in stock

    KYOFAW205, Kyosho FZ02 HD Front Hub Set (Red) This is a set of optional Kyosho FZ02 Heavy Duty Front Hubs, intended for use with Kyosho Fazer FZ02 kits. These parts are CNC machined from quality red anodized aluminum and allow for smoother suspension movement and two camber angle adjustments. Package includes two hubs and hardware. This product was added to our catalog on April 28, 2023

    3 in stock

    $39.99

  • KYOFAW225, Kyosho Fazer Mk2 TC Aluminum Shock Set KYOFAW225, Kyosho Fazer Mk2 TC Aluminum Shock Set

    KYOSHO KYOFAW225, Kyosho Fazer Mk2 TC Aluminum Shock Set

    4 in stock

    KYOFAW225, Kyosho Fazer Mk2 TC Aluminum Shock Set The Kyosho Fazer Mk2 TC Aluminum Shock Set is the perfect upgrade for your Fazer. Featuring threaded aluminum shock bodies these will allow for fine tuning and be more consistent than the factory plastic shocks. Package includes two complete shocks for the Kyosho Fazer Mk2. This product was added to our catalog on May 21, 2021

    4 in stock

    $39.99

  • KYO34492T1, Kyosho EP Fazer Mk2 FZ02L VE 1970 Dodge Charger Supercharged ReadySet (Grey) w/Syncro KT-231P+ Radio KYO34492T1, Kyosho EP Fazer Mk2 FZ02L VE 1970 Dodge Charger Supercharged ReadySet (Grey) w/Syncro KT-231P+ Radio

    KYOSHO KYO34492T1, Kyosho EP Fazer Mk2 FZ02L VE 1970 Dodge Charger Supercharged ReadySet (Grey) w/Syncro KT-231P+ Radio

    Out of stock

    KYO34492T1, Kyosho EP Fazer Mk2 FZ02L VE 1970 Dodge Charger Supercharged ReadySet (Grey) w/Syncro KT-231P+ Radio Kyosho Fazer Mk2 FZ02L VE Brushless Touring Car with Supercharged 1970 Dodge Charger Body The Kyosho EP Fazer Mk2 FZ02L VE 1970 Dodge Charger Supercharged ReadySet is a brushless chassis that has a classic muscle car look. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. This Charger body features a scale supercharger and molded light buckets for optional LED's (not included). To complete the look, Kyosho included functional flip headlight covers that can actuate by removing a screw from the headlight assembly. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. The Ready Set package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car.  Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 507mm Width: 195mm Body Width: 210mm Height: 128mm Chassis Height: 15mm Wheelbase: 274mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1680g Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery for chassis Tools This product was added to our catalog on May 9, 2022

    Out of stock

    $329.99

  • KYO34431, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Champagne Metallic) w/Syncro KT-231P+ KYO34431, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Champagne Metallic) w/Syncro KT-231P+

    KYOSHO KYO34431, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Champagne Metallic) w/Syncro KT-231P+

    2 in stock

    KYO34431, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Champagne Metallic) w/Syncro KT-231P+ The Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car.  Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 500mm Width: 195mm(Body width:210mm) Height: 136mm Wheelbase: 274mm Tread (F/R): F:167mm/R:167mm Tires (F/R): F:64×27.7mm/R:64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof electronic speed controller (forward/brake/reverse) +5mm off-set wheel hub (for 200mm width chassis), M4 x 22 wheel screw Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery for chassis Tools This product was added to our catalog on March 24, 2022

    2 in stock

    $269.99

  • KYOFATH701BKM, Kyosho Fazer Mk2 Pre-Mounted TC Tire (2) (M) KYOFATH701BKM, Kyosho Fazer Mk2 Pre-Mounted TC Tire (2) (M)

    KYOSHO KYOFATH701BKM, Kyosho Fazer Mk2 Pre-Mounted TC Tire (2) (M)

    4 in stock

    KYOFATH701BKM, Kyosho Fazer Mk2 Pre-Mounted TC Tire (2) (M) Kyosho FZ02 Pre-Mounted TC Tire in M compound. Package includes two replacement tires intended for the Kyosho Fazer Mk2. This product was added to our catalog on August 15, 2022

    4 in stock

    $24.99

  • KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio

    KYOSHO KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio

    6 in stock

    KYO40462ST2, Kyosho Seawind ReadySet Racing Yacht w/KT-431S 2.4GHz Radio Kyosho Seawind ReadySet Racing Yacht. The large aspect ratio of the long span keel and tight response from the push-pull rudder control make up the Seawind's race-ready specifications. Sharp acceleration brings the Seawind quickly up to full speed while exceptional energy efficiency delivers maximum stability in light winds so you can use light breeze like a pro. The classic design features a molded one-piece ABS hull factory finished in a beautiful color design that comes fitted with a 2.4GHz RC system that automatically manages frequency band selection. The sail and rudder servos are waterproof and deliver exceptional reliability under various conditions. Features: Readyset installed with 2.4Ghz R/C system realized at a value price Pre-assembled one-piece ABS hull complete with coloring The aluminum mast and boom are hard anodized for extra strength Features extruded high strength aluminum mast and boom Features pre-cut and sewn spin cloth main and jib sails Large aspect ratio keel provides low resistance and excellent performance even under strong winds The super strong structure features shaft from deck through to the ballast Ballast is lead-free for environmentally friendly specifications Equipped with a rubber cap for easy release of water from the hull Packed with accessory parts for extra detail as a display model Push-pull rudder and sail control provide sure control for sharp racing performance Features waterproof sail and rudder servo The main mast, keel, ballast and rudder can be detached without the use of any tools Specifications: Length: 998mm Width: 226mm Height: 1,850mm Weight: 3,100g R/C System: Syncro KT-431S, 2.4GHz, FHSS Sail Area: 39dm2 Servo: Sail KS9071-20SW / Rudder KS4031-06W Needed to Complete: (8) AA Batteries This product was added to our catalog on April 14, 2023

    6 in stock

    $449.99

  • KYO34426T1, Kyosho Fazer Mk2 FZ02 1/10 Subaru Impreza WRC 2006 ReadySet Electric Touring Car w/2.4GHz Radio KYO34426T1, Kyosho Fazer Mk2 FZ02 1/10 Subaru Impreza WRC 2006 ReadySet Electric Touring Car w/2.4GHz Radio

    KYOSHO KYO34426T1, Kyosho Fazer Mk2 FZ02 1/10 Subaru Impreza WRC 2006 ReadySet Electric Touring Car w/2.4GHz Radio

    Out of stock

    KYO34426T1, Kyosho Fazer Mk2 FZ02 1/10 Subaru Impreza WRC 2006 ReadySet Electric Touring Car w/2.4GHz Radio The Kyosho Fazer Mk2 FZ02 Nissan Skyline 2000 GT-R KPGC10 ReadySet was created to enjoy R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring a slipper clutch, front & rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car Original low-profile semi-slick pattern tires produce superior performance and combine with 15-spoke wheels for stunning visuals. Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter and battery with charger for the chassis Full ball bearings that reduce drive loss are equipped throughout the drive system Features KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Shaft drive full-time 4WD touring chassis Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale Button head hex screws throughout to simplify maintenance Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T Performance can be further enhanced by installing various optional parts Specifications: Length: 450mm Width: 195mm (Body width:200mm) Height: 136mm Chassis Height: 8mm(approx.) Wheelbase: 260mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory-assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for the transmitter 7.2-7.4V battery w/T-Style plug for chassis Charger for battery Tools This product was added to our catalog on October 27, 2022

    Out of stock

    $239.99

  • KYO34431T2, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Tyrol Blue) w/Syncro KT-231P+ KYO34431T2, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Tyrol Blue) w/Syncro KT-231P+

    KYOSHO KYO34431T2, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Tyrol Blue) w/Syncro KT-231P+

    1 in stock

    KYO34431T2, Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet (Tyrol Blue) w/Syncro KT-231P+ The Kyosho EP Fazer Mk2 FZ02L 1967 Pontiac GTO ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car.  Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 500mm Width: 195mm(Body width:210mm) Height: 136mm Wheelbase: 274mm Tread (F/R): F:167mm/R:167mm Tires (F/R): F:64×27.7mm/R:64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof electronic speed controller (forward/brake/reverse) +5mm off-set wheel hub (for 200mm width chassis), M4 x 22 wheel screw Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery for chassis Tools This product was added to our catalog on October 21, 2022

    1 in stock

    $269.99

  • KYOFAW202, Kyosho Fazer MK.2 TC Universal Swing Shaft S (2) KYOFAW202, Kyosho Fazer MK.2 TC Universal Swing Shaft S (2)

    KYOSHO KYOFAW202, Kyosho Fazer MK.2 TC Universal Swing Shaft S (2)

    6 in stock

    KYOFAW202, Kyosho Fazer MK.2 TC Universal Swing Shaft S (2) Kyosho Fazer MK.2 TC Universal Swing Shaft S. These optional swing shafts are intended for the Kyosho Fazer MK.2 chassis. Using these will allow for for an increase in drive train efficiency. Package includes two swing shafts, two retaining clips and two inserts. This product was added to our catalog on October 8, 2021

    6 in stock

    $44.99

  • KYO97054-4B, LED Light Unit (5mm/4 Bulbs/L=400/Clear)

    KYOSHO KYO97054-4B, LED Light Unit (5mm/4 Bulbs/L=400/Clear)

    5 in stock

    LED Light Unit (5mm/4 Bulbs/L=400/Clear)

    5 in stock

    $14.99

  • KYO34418T2, 1/10 Fazer Mk2 Readyset with 1969 Chevy Camaro Z28 Body (Frost Green) KYO34418T2, 1/10 Fazer Mk2 Readyset with 1969 Chevy Camaro Z28 Body (Frost Green)

    KYOSHO KYO34418T2, 1/10 Fazer Mk2 Readyset with 1969 Chevy Camaro Z28 Body (Frost Green)

    Out of stock

    KYO34418T2, 1/10 Fazer Mk2 Readyset with 1969 Chevy Camaro Z28 Body (Frost Green)

    Out of stock

    $239.99

  • KYOFAW210, Kyosho Fazer Mk2 HD Aluminum Center Driveshaft (FZ02L) KYOFAW210, Kyosho Fazer Mk2 HD Aluminum Center Driveshaft (FZ02L)

    Kyosho KYOFAW210, Kyosho Fazer Mk2 HD Aluminum Center Driveshaft (FZ02L)

    8 in stock

    KYOFAW210, Kyosho Fazer Mk2 HD Aluminum Center Driveshaft (FZ02L) This is an optional Kyosho Fazer Heavy Duty Center Shaft, intended for use with Fazer FZ02L kits. This CNC machined heavy duty aluminum shaft is anodized red for added style. This durable precision made center shaft is for high power motors with high gear ratio setups. Can be used with stock outdrives.  NOTE: This is for the FZ02L (Long) chassis; if you have a FZ02 (Short) chassis, please see part KYOFAW209.  This product was added to our catalog on June 15, 2023

    8 in stock

    $8.99

  • KYO34471T1, Kyosho EP Fazer Mk2 FZ02-D Toyota Supra A80 ReadySet (White/Black/Red) w/Syncro KT-231P+ KYO34471T1, Kyosho EP Fazer Mk2 FZ02-D Toyota Supra A80 ReadySet (White/Black/Red) w/Syncro KT-231P+

    KYOSHO KYO34471T1, Kyosho EP Fazer Mk2 FZ02-D Toyota Supra A80 ReadySet (White/Black/Red) w/Syncro KT-231P+

    Out of stock

    KYO34471T1, Kyosho EP Fazer Mk2 FZ02-D Toyota Supra A80 ReadySet (White/Black/Red) w/Syncro KT-231P+ Toyota Supra A80 with Kyosho original graphics. Next generation chassis with improved durability, performance, maintenance, and friendly features. Features: Fazer Mk2 Chassis FZ02. Shorter wheel wheel-base compared to the FZ02L (Dodge Challenger) chassis. Simple and efficient shaft driven 4WD design with improved performance. Light weight and low CG bathtub style design made of durable glass reinforced 66 nylon material. Licensed Toyota Supra A80 Body New wheel design with brake rotor parts!. Also includes 0mm offset rotor hubs (Allowing 190mm width) Drift Tires New steering and double wishbone suspension design for superior handling and damping characteristics. Adjustable caster angle(3 settings) 12mm big bore shock Reliable shaft driven 4WD drivetrain design with slipper clutch 2 bevel gear type diff system on front and rear Easy gear mesh system Powerful Kyosho original 550 size 14T brushed motor Kyosho Speed House KA060 91W water proof brushed 60A ESC with Super plug connectors. 2S Li Po compatible. High response, high torque KS 4081 04 WP water proof steering servo New shock design and soft shock spring setup New RX box to protect from dust and debris Syncro 2.4GHz KT2 31P Radio system All hex hardware Full ball bearings Specifications: Length: 455mm Width: (Body width)  200mm (210mm) Height: 120mm Wheelbase: 260mm Tread Front/Rear: 174mm/174mm Tires Front/Rear: 64×24.2mm/64×24.2mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) Transmitter: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof ESC (forward/brake/reverse) Hex wrench Spanner Needed to Complete: Battery for Chassis w/T-Plug Connector Charger (4) AA size batteries for transmitter This product was added to our catalog on October 19, 2021

    Out of stock

    $219.99

  • KYO34419T1B, 1/10 Fazer 1969 Chevy El Camino SS396, ReadySet

    KYOSHO KYO34419T1B, 1/10 Fazer 1969 Chevy El Camino SS396, ReadySet

    Out of stock

    For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can't be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition to the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. TECHNICAL DATA*Length: Approx 46 1 mm Width: Approx 195 mm Height: 132 mm *Wheelbase: 2 74 mm *Tread:1 67 mm(F)/ 1 67 mm(R)Tire Width : 2 7.7 mm *Tire Diameter : 6 4 mm *Weight Approx 1 65 0 g*Gear Ratio: 6. 5 4 :1 * Top Speed : 40km / h Run Time : 15 minREADYSET CONTENTS*Factory assembled chassis with graphics S ervo (KS 4081 04 WP ) SYNCRO KT 2 31P transmitter and KR 331 Receiver unit Kyosho KA060 91W ESC and G14L motorREQUIRED FOR OPERATION4 xAA battery for Transmitter 7.2V 8.4V NiMh or 7.4 Li Po battery and charger Features: Fazer Mk2 Chassis FZ02L. Simple and efficient shaft driven 4WD design with improved performance. Light weight and low CG bathtub style design made of durable glass reinforced 66 nylon material. Licensed 1969 Chevy El Camino body. Plastic chrome plated grill and headlights. Tinted clear windows. LED ready with light buckets. ULTRA SCALE badges. Scale wheel design with brake rotor parts. Vintage style high grip tires and chrome plated rims. Improved steering and double wishbone suspension design for superior handling and damping characteristics. Plastic made of durable glass reinforced nylon material. Adjustable caster angle (3 settings). 12mm big bore shocks. Reliable shaft driven 4WD drivetrain design with slipper clutch. 2 bevel gear type diff system on front and rear. Easy gear mesh system. Stock pinion is 32T. Powerful Kyosho 550 size 14T brushed motor. Kyosho Speed House KA060 91W water proof brushed 60A ESC with Super plug connectors. 2S Li Po compatible. High response, high torque KS 4081 04 WP waterproof steering servo

    Out of stock

    $239.99

  • KYOFAW206, Kyosho FZ02 HD Rear Hub Set (Red) KYOFAW206, Kyosho FZ02 HD Rear Hub Set (Red)

    KYOSHO KYOFAW206, Kyosho FZ02 HD Rear Hub Set (Red)

    Out of stock

    KYOFAW206, Kyosho FZ02 HD Rear Hub Set (Red) This is a set of optional Kyosho FZ02 Heavy Duty Rear Hubs, intended for use with Kyosho Fazer FZ02 kits. These parts are CNC machined from quality red anodized aluminum and allow for smoother suspension movement and two camber angle adjustments. Package includes two hubs and hardware. This product was added to our catalog on April 28, 2022

    Out of stock

    $39.99

  • KYOFAB701, Kyosho Clear Body Set, Challenger KYOFAB701, Kyosho Clear Body Set, Challenger

    KYOSHO KYOFAB701, Kyosho Clear Body Set, Challenger

    Out of stock

    KYOFAB701, Clear Body Set, Challenger The Kyosho Dodge Challenger Hellcat Body is a clear polycarbonate body option for the Kyosho Fazer Mk.2 FZ02L chassis, and any 200mm touring car with a 275mm wheelbase. Package includes window masks, body trim decals, and body accessories like front light buckets that will accept your LED lights (LEDs not included). This product was added to our catalog on May 10, 2023  

    Out of stock

    $62.99

  • KYOFAB609, Kyosho Subaru Impreza WRC 2006 Body Set (Clear) KYOFAB609, Kyosho Subaru Impreza WRC 2006 Body Set (Clear)

    KYOSHO KYOFAB609, Kyosho Subaru Impreza WRC 2006 Body Set (Clear)

    3 in stock

    KYOFAB609, Kyosho Subaru Impreza WRC 2006 Body Set (Clear) Kyosho Subaru Impreza WRC 2006 Clear Body Set. This clear body set features an incredibly detailed Subaru Impreza WRC 2006 Lexan body. This high quality body is a great option for most touring cars such as the Kyosho Fazer. Package includes one clear body, diffuser, wing, window masks and four decal sheets. NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted. This product was added to our catalog on April 5, 2023

    3 in stock

    $65.99

  • KYO34425T1, 1/10 EP 4WD FAZER Mk2 FZ02 Nissan Skyline 2000GT-R (KPGC10) Tuned Version Silver

    KYOSHO KYO34425T1, 1/10 EP 4WD FAZER Mk2 FZ02 Nissan Skyline 2000GT-R (KPGC10) Tuned Version Silver

    Out of stock

    Faithfully reproduce the famous car nicknamed "Hakosuka GT-R" with an ultra-scale body!The FAZER Mk2 series, which proposes to enjoy the driving of an R/C car purely regardless of whether it is fast or slow, in combination with a body that reproduces the form of the actual car with a rich sense of reality. The lightweight chassis, which has improved maintainability by reducing the number of parts, has a simple design, but it is suitable for high strength and running with detailed brush-up such as front and rear stiffeners, reinforcing ribs provided in each part, and changes in the material used. Ensuring rigidity. In addition, by designing the chassis to be as symmetric as possible, we have acquired a straightforward maneuverability without habit due to the synergistic effect of the suspension with excellent front-rear balance and the power source suitable for the vehicle class. On top of that, front and rear gear differentials, oil dampers, and full ball bearings are used. It ensures high durability and impact resistance, and firmly supports the driver. In addition to the standard 0mm offset brake disc type wheel hub, a (+ 5mm) offset wheel hub is included to support both 190mm and 200mm wide bodies, and the wheelbase is available as an optional part (sold separately). A 270mm long main chassis and long center shaft are available. By rearranging these parts, a 1/10 scale body other than the attached body can be mounted. Moreover, since it is a factory-completed ready set that has everything, you can enjoy driving immediately if you purchase a driving battery, a driving battery charger, and a transmitter battery separately. "ULTRA SCALE BODY" that faithfully reproduces the body, light bucket, bumper, and mirror, and should be called a "running display model" that has been thoroughly crafted not only as a car but also in detail . It is a factory-completed body with coloring and decals attached.-Injection parts are used for the front and rear over fenders to improve the texture of the body.-The separately sold LED light unit (97054) can be attached to the front and rear light buckets, making it even more scaled.-A factory-completed ready set that can be run by purchasing 4 AA batteries for the transmitter, a running battery, and a charger for the running battery.-Full ball bearing specifications equipped with bearings that reduce drive loss in all drive parts.-The steering servo is equipped with waterproof KS202W as standard equipment.-Sealed type differential and mission with high reliability even in dusty parking lots.-It is a shaft-driven full-time 4WD touring chassis that is easy for anyone to handle and enjoy driving.-Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale.-Uses button screws with hexagonal holes in each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools.-The motor mount has mounting holes according to the pinion gear, eliminating the need for troublesome backlash adjustment. Supports from 29T to 37T.-Driving performance can be improved by installing various optional parts.The simple and functional main chassis with a low center of gravity is integrated with a gearbox that optimizes torsional rigidity, and the weight is reduced by adopting lightweight impact-resistant nylon. Achieves an upper deckless design with a simple design that gives strength to each part. Not only reducing the number and types of parts and screws used, but also unifying the screws of the parts that may be removed frequently to the same size. A flat head screw that can remove most of the screws with a 2.0mm hexagon wrench is used to pursue ease of disassembly and assembly.Front suspension with optimized factors that affect handling, such as bump steer and scrub radius. One of the features is the adoption of a simple ball connect type steering knuckle that promises reliable operation. In addition, by sharing the front and rear hub carriers on the left and right, the number of spare parts on hand can be kept to a minimum, improving maintainability.The brake disc type wheel hub, which greatly contributes to visual enhancement together with the dummy caliper, comes with two types with different offsets to support both 190mm width and 200mm width bodies.Equipped with an oil damper as standard equipment. Change the vehicle height by changing the length of the damper end according to the vehicle type.68T and 32T are standard settings for spur gears and pinion gears, respectively, but 9 types of pinion gears from 29T to 37T can be used to suit various motors, and a wide range of gear ratio settings are possible. In addition, by directly fixing the motor to the position according to the number of teeth of the pinion gear to be used, the trouble of backlash adjustment is reduced.The body is particular about scale and detail, and body accessory parts such as front and rear over fenders are made into injection parts. The bumper and grill are plated. Furthermore, we have thoroughly created the GT-R emblem.Reproduce the vintage touring car (VTC) tires and "Hakosuka GT-R" custom standard "8-spoke Watanabe wheels" designed to match vintage cars.Front and rear light buckets compatible with the separately sold 97054 LED light unit series. By installing the LED light unit, it transforms into a body full of real car feeling. Specifications:   Overall Length: 450mm Overall Width 195mm (Body width: 200mm) Wheelbase: 260mm Tread (Front/Rear) 167mm Tire (Front/Rear) 64x27.7mm Gear Ratio: 6.54:1  

    Out of stock

    $269.99

  • KYO34427T1, Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet (White) w/Syncro KT-231P+ KYO34427T1, Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet (White) w/Syncro KT-231P+

    KYOSHO KYO34427T1, Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet (White) w/Syncro KT-231P+

    Out of stock

    KYO34427T1, Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet (White) w/Syncro KT-231P+ The Kyosho Fazer Mk2 FZ02 1971 Datsun 240Z Tuned Version ReadySet was created to enjoy R/C car driving. The combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car Original low-profile semi-slick pattern tires produce superior performance and combine with 15-spoke wheels for stunning visuals. Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter and battery with charger for the chassis Full ball bearings that reduce drive loss are equipped throughout the drive system Features KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Shaft drive full-time 4WD touring chassis Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale Button head hex screws throughout to simplify maintenance Motor mount mounting holes specific to pinion gear size to simplify gear ratio changes - supports from 29T to 37T Performance can be further enhanced by installing various optional parts Specifications: Length: 462mm Width: 200mm Height: 136mm Chassis Height: 8mm(approx.) Wheelbase: 260mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory-assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for the transmitter 7.2-7.4V battery w/T-Style plug for chassis Charger for battery Tools This product was added to our catalog on February 21, 2023

    Out of stock

    $289.99

  • KYO34433T1, Kyosho EP Fazer Mk2 FZ02L 1957 Chevy Bel Air Coupe ReadySet (Turquoise) w/Syncro KT-231P+ Radio KYO34433T1, Kyosho EP Fazer Mk2 FZ02L 1957 Chevy Bel Air Coupe ReadySet (Turquoise) w/Syncro KT-231P+ Radio

    KYOSHO KYO34433T1, Kyosho EP Fazer Mk2 FZ02L 1957 Chevy Bel Air Coupe ReadySet (Turquoise) w/Syncro KT-231P+ Radio

    2 in stock

    KYO34433T1, Kyosho EP Fazer Mk2 FZ02L 1957 Chevy Bel Air Coupe ReadySet (Turquoise) w/Syncro KT-231P+ Radio This is the Kyosho EP Fazer Mk2 FZ02L 1957 Chevy Bel Air Coupe ReadySet. Using the iconic 1957 Chevy Bel Air Coupe as an inspiration, Kyosho has expertly recreated this classic car with incredible detail. The scale polycarbonate body incorporates the unmistakable Bel Air grille, lights, window trim and who could forget the large tail fins! The combination of this beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance. A simplified design with fewer parts simplifies maintenance and reduces weight, while core strength and rigidity has been increased through updated materials and ribbing/stiffeners on front and rear. In addition, the symmetrical chassis design offers excellent front-rear suspension balance with responsive control, regardless of power source. Featuring front and rear gear differentials, oil filled shocks, full ball bearings and a durable and impact resistant chassis allows drivers to unleash the full potential of the Fazer platform. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some optional parts (not included). This gives the Fazer platform added compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: "Ultra Scale Body" replicates the fine details of the actual body of the car Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints offer superior reliability and durability Full ball bearings reduce friction and increase efficiency Includes KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Specifications: Length: 493mm Width: 211mm (Body width, excluding mirrors) Height: 146mm Wheelbase: 274mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C System: Syncro KT-231P+ Motor: G14L Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed To Complete: (4) AA Batteries for transmitter Battery and charger for chassis Tools This product was added to our catalog on January 31, 2023

    2 in stock

    $289.99

  • KYOFA552, Kyosho Fazer TC Dogbone Swing Shaft & Dummy Disc Brake Hex (4) KYOFA552, Kyosho Fazer TC Dogbone Swing Shaft & Dummy Disc Brake Hex (4)

    KYOSHO KYOFA552, Kyosho Fazer TC Dogbone Swing Shaft & Dummy Disc Brake Hex (4)

    7 in stock

    KYOFA552, Kyosho Fazer TC Dogbone Swing Shaft & Dummy Disc Brake Hex (4) This is a replacement Kyosho Dogbone Swing Shaft and Dummy Disc Brake Hex Set for the Fazer FZ02 Chassis. This set includes four dogbones (can be used in any position), four red colored brake calipers and lastly, two full sets of shiny disc brakes with hexes; one set of disc brakes are for use with 190mm bodies, and the remaining set features an additional offset for 200mm body compatibility. This product was added to our catalog on July 11, 2021

    7 in stock

    $14.99

  • KYO34432T1, Fazer MK2 2021 Toyota Tundra TDR Pro Street Modified RTR, Wide Body, Orange, 1/10 Electric 4WD KYO34432T1, Fazer MK2 2021 Toyota Tundra TDR Pro Street Modified RTR, Wide Body, Orange, 1/10 Electric 4WD

    KYOSHO KYO34432T1, Fazer MK2 2021 Toyota Tundra TDR Pro Street Modified RTR, Wide Body, Orange, 1/10 Electric 4WD

    1 in stock

    The Tundra is Toyota's latest and greatest model in the truck category, and the Kyosho Version of the Tundra Pro goes low and wide with the unique "slammed"2021 Tundra TRD Pro. It features Inferno Orange paint, wide wheel flares and new 5-spoke wheels. There's also an Aero Kit installed that includes spoilers on the rear of the Double Cab and Tailgate, There's also a sick looking diffuser below the tailgate that shows this rig is uniquely "Street!" Features:   Simple and efficient FZ02L chassis. Shaft driven 4WD design. Light weight and low C of G bathtub style design made of durable glass reinforced 66 nylon material. Licensed 2021 Toyota Tundra TRD Pro Body!! Molded headlight / grill with light buckets(LED compatible). New complex true to scale injection molded parts like front and rear lights, side mirrors and rear diffuser. New scale wheel design with brake rotor parts!! Also includes 0mm offset rotor hubs(Allowing 190mm width)!! New high grip radial tires!! New steering and double wishbone suspension design for superior handling and damping characteristics. Plastic made of durable glass reinforced 66 nylon material. Adjustable caster angle(3 settings). New powerful Kyosho original 550 size G14L brushed motor. New Kyosho Speed House KA060-91W water-proof brushed 60A ESC with Super plug connectors. 2S Li-Po compatible. New high response high torque KS202W water-proof steering servo New RX box to protect from dust and debris New Syncro 2.4GHz KT231P+ Radio system All hex hardware Full ball racer

    1 in stock

    $245.99

  • KYOFATH702BKM, Kyosho Fazer Pre-Mounted Sedan Tires w/15 Spoke Wheels (2) (Black) (12mm Hex) KYOFATH702BKM, Kyosho Fazer Pre-Mounted Sedan Tires w/15 Spoke Wheels (2) (Black) (12mm Hex)

    KYOSHO KYOFATH702BKM, Kyosho Fazer Pre-Mounted Sedan Tires w/15 Spoke Wheels (2) (Black) (12mm Hex)

    Out of stock

    KYOFATH702BKM, Kyosho Fazer Pre-Mounted Sedan Tires w/15 Spoke Wheels (2) (Black) (12mm Hex) This is an optional set of two Kyosho Fazer Black Pre-Mounted Sedan Tires with 15 Spoke Wheels, intended for use with Fazer Mk2 kits. This product was added to our catalog on August 15, 2022

    Out of stock

    $24.99

  • KYOFAH703BK, Kyosho Fazer Rostyle Sedan Wheels (Black) (2) KYOFAH703BK, Kyosho Fazer Rostyle Sedan Wheels (Black) (2)

    KYOSHO KYOFAH703BK, Kyosho Fazer Rostyle Sedan Wheels (Black) (2)

    8 in stock

    KYOFAH703BK, Kyosho Fazer Rostyle Sedan Wheels (Black) (2) Kyosho Fazer Rostyle Sedan Wheels. These optional Rostyle sedan wheels are intended to fit the Kyosho Fazer touring car. Package includes two black Kyosho Fazer Rostyle sedan wheels This product was added to our catalog on August 15, 2022

    8 in stock

    $8.99

  • KYO34417T2, Kyosho EP Fazer Mk2 FZ02L 1970 Dodge Charger 1/10 Touring Car ReadySet (Green) w/Syncro KT-231P Radio KYO34417T2, Kyosho EP Fazer Mk2 FZ02L 1970 Dodge Charger 1/10 Touring Car ReadySet (Green) w/Syncro KT-231P Radio

    KYOSHO KYO34417T2, Kyosho EP Fazer Mk2 FZ02L 1970 Dodge Charger 1/10 Touring Car ReadySet (Green) w/Syncro KT-231P Radio

    Out of stock

    Kyosho Fazer Mk2 1/10 Touring Car (1970 Dodge Charger Body) The Kyosho 1970 Dodge Charger Fazer Mk2 ReadySet was created for the pure enjoyment of RC car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity have been increased through new materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring a slipper clutch, front and rear gear differentials, oil shocks and full ball bearings, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allow the wheelbase to be adjusted to 270mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles. The Readyset package comes fully assembled and includes everything except the charger and battery for the chassis, and batteries for the transmitter. Features: Fully assembled, painted and ready to run Updated design shaft drive full-time 4WD touring chassis (FZ02L) Ultra scale officially licensed body replicates the fine details of the real 1970 Charger Equipped with 2-bevel grease-filled gear diffs on front and rear Large sized dog bones and cup joints provide excellent reliability and durability Full ball bearings equipped throughout the drive system KS202W waterproof steering servo Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Specifications: Scale: 1/10 Drivetrain: 4WD Shaft driven Length: 507mm Width: 210mm Height: 128mm Wheelbase: 274mm Tread (F/R): 167mm Tires (F/R): 64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) Motor: G14L Includes: (1) EP Fazer Mk2 FZ02L 1970 Dodge Charger 1/10 Touring Car ReadySet (1) Syncro KT-231P+ transmitter and receiver (1) Hexagonal wrench (1) Spanner Needed to Complete: (1) 2S (7.4V) LiPo Battery with T-Style connector (1) Compatible Charger (4) (AA) Batteries This product was added to our catalog on May 25, 2023

    Out of stock

    $239.99

  • KYO34493T1, Kyosho Fazer Mk2 FZ02 VE 69 Camaro Z/28 RS Supercharged ReadySet (Tuxedo Black) w/Syncro KT-231P+ KYO34493T1, Kyosho Fazer Mk2 FZ02 VE 69 Camaro Z/28 RS Supercharged ReadySet (Tuxedo Black) w/Syncro KT-231P+

    KYOSHO KYO34493T1, Kyosho Fazer Mk2 FZ02 VE 69 Camaro Z/28 RS Supercharged ReadySet (Tuxedo Black) w/Syncro KT-231P+

    2 in stock

    Kyosho Fazer Mk2 FZ02 VE 69 Camaro Z/28 RS Supercharged ReadySet (Tuxedo Black) w/Syncro KT-231P+ The Kyosho Fazer Mk2 FZ02 VE 1969 Camaro Z/28 RS Supercharged ReadySet was created for the pure enjoyment of R/C car driving. The combination of a beautifully reproduced body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through materials with ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, regardless of the power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (not included) for compatibility with other 1/10 scale body styles, in addition to the included body. The Readyset package comes fully assembled and requires only charger and battery for the chassis, and batteries for the transmitter to start driving. Features: “Ultra Scale Body” replicates the fine details of the actual body of the car.  Shaft drive full-time 4WD touring chassis (FZ02) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis Equipped with 2-bevel grease-filled gear diffs on front and rear Large size dog bones and cup joints realize superior reliability and durability Belt mounting battery compartment allows various battery types to be used Full ball bearings that reduce drive loss equipped throughout the drive system Features KS202W waterproof steering servo Includes completely finished body with color scheme and decals applied Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces Performance can be further enhanced by installing various optional parts Specifications: Length: 461mm Width: 210mm Height: 138mm Wheelbase: 260mm Tread (F/R): F:167mm/R:167mm Tires (F/R): F:64×27.7mm/R:64×27.7mm Gear Ratio: 6.54:1 Weight: 1650g (approx.) R/C system: Syncro KT-231P+ Motor: TORX10E Includes: Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Hexagonal wrench Spanner Needed to Complete: (4) AA batteries for transmitter 7.2-7.4V Battery for chassis Charger for battery for chassis Tools This product was added to our catalog on November 30, 2022

    2 in stock

    $349.99

  • KYO34415T2B, 1/10 EP 4WD Fazer Mk2 2015 Dodge SRT Challenger Hellcat Crazy B5 Blue, RTR Touring Car

    KYOSHO KYO34415T2B, 1/10 EP 4WD Fazer Mk2 2015 Dodge SRT Challenger Hellcat Crazy B5 Blue, RTR Touring Car

    Out of stock

    For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can't be beaten. A simplified design with fewer parts has improved maintenance efficiency and reduced weight, while core strength and rigidity has been increased through ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance with responsive control, irrespective of power source. Featuring front & rear gear differentials, oil shocks, and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately). The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: Shaft drive full-time 4WD touring chassis (FZ02L). Comes with the powerful 550 size 14T brushed motor(G14L). Equipped with 2-bevel grease-filled gear differentials on front and rear. Large sized dog bones and cup joints for excellent reliability and durability. Strap battery mounting allows for various battery types to be used. Includes completely finished body with color scheme and decals applied. Specifications: Length: 486mm Width: 200mm Wheelbase: 274mm Tread (F/R): F:174mm / R:174mm Tires (F/R): F:66x25mm / R:66x25mm Weight: 1650g (approx.)

    Out of stock

    $239.99

  • KYOFA540-41, Kyosho Mad Van VE Metal Ring Gear (41T) KYOFA540-41, Kyosho Mad Van VE Metal Ring Gear (41T)

    Kyosho KYOFA540-41, Kyosho Mad Van VE Metal Ring Gear (41T)

    2 in stock

    KYOFA540-41, Kyosho Mad Van VE Metal Ring Gear (41T) Kyosho Mad Van VE Metal Ring Gear. This replacement ring gear is intended for the Kyosho Mad Van VE, however, it may also be used with the Mad Van (KYO34412T1). Package includes one ring gear. This product was added to our catalog on July 06, 2023

    2 in stock

    $15.99

  • KYOFAW204, Kyosho Fazer Mk2 HD Aluminum Wheel Hub (4) KYOFAW204, Kyosho Fazer Mk2 HD Aluminum Wheel Hub (4)

    KYOSHO KYOFAW204, Kyosho Fazer Mk2 HD Aluminum Wheel Hub (4)

    Out of stock

    KYOFAW204, Kyosho Fazer Mk2 HD Aluminum Wheel Hub (4) Kyosho Fazer Mk2 HD Aluminum Wheel Hub. These optional wheel hubs are mounted to the wheel shafts using cap head screws. This will hold the wheel hub more securely than the stock press fit hubs. Package includes four optional wheel hubs with mounting screws. This product was added to our catalog on April 28, 2023

    Out of stock

    $39.99

  • KYOFAT701M, Kyosho Fazer Mk2 TC Tire (2) (M) KYOFAT701M, Kyosho Fazer Mk2 TC Tire (2) (M)

    KYOSHO KYOFAT701M, Kyosho Fazer Mk2 TC Tire (2) (M)

    6 in stock

    KYOFAT701M, Kyosho Fazer Mk2 TC Tire (2) (M) Kyosho Fazer Mk2 TC Tire in M compound. Package includes two replacement tires intended for the Kyosho Fazer Mk2. This product was added to our catalog on March 23, 2021

    6 in stock

    $15.99

  • KYOFAB605, Kyosho Toyota Supra Body Set (Clear) KYOFAB605, Kyosho Toyota Supra Body Set (Clear)

    KYOSHO KYOFAB605, Kyosho Toyota Supra Body Set (Clear)

    1 in stock

    KYOFAB605, Kyosho Toyota Supra Body Set (Clear) Kyosho Toyota Supra Clear Body Set. This optional clear Supra body set is intended for the Kyosho Fazer Mk2 FZ02, however, it will fit most bodies with a 260mm wheelbase. Package includes one clear Lexan body, window masks and two decal sheets NOTE: Painted body shown in the photos is for illustrative purposes only. The product you will receive is clear and unpainted. This product was added to our catalog on May 10, 2023

    1 in stock

    $62.99

  • KYOFAB702BK, Kyosho Fazer Mk2 Chevy Chevelle SS454 LS6 Pre-Painted Body Set (Tuxedo Black) KYOFAB702BK, Kyosho Fazer Mk2 Chevy Chevelle SS454 LS6 Pre-Painted Body Set (Tuxedo Black)

    KYOSHO KYOFAB702BK, Kyosho Fazer Mk2 Chevy Chevelle SS454 LS6 Pre-Painted Body Set (Tuxedo Black)

    Out of stock

    KYOFAB702BK, Kyosho Fazer Mk2 Chevy Chevelle SS454 LS6 Pre-Painted Body Set (Tuxedo Black) Kyosho Fazer Mk2 Chevy Chevelle SS454 LS6 Pre-Painted Body Set. This replacement body set is intended for the Kyosho Fazer Mk2. Featuring extreme detail and is equipped with many molded components to and classic bowtie styling. Package includes one pre-painted body and instruction sheet. Specifications: Wheelbase: 10.78" (274mm) Dimensions: 19.29x8.18x4.56" (490x208x116mm) This product was added to our catalog on May 10, 2023

    Out of stock

    $100.99

  • KYO34311, Kyosho Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit KYO34311, Kyosho Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit

    KYOSHO KYO34311, Kyosho Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit

    2 in stock

    KYO34311, Kyosho Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit This is the Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit. Built on the foundation of the competition-level Ultima RB5, the Dirt Master features high-quality performance components at a mid-range price. Its rear motor layout provides unbeatable grip and stability over low-traction surfaces like gravel and riverbeds. The nostalgic flair of the Dirt Master's updated body pays homage to the classic buggy design while incorporating modern performance features. And with its racing heritage, this buggy is equally at home on fully-fledged RC racing circuits as it is in the great outdoors.Whether you're a beginner driver looking to step up your off-road game or a seasoned racer seeking some good old-fashioned bashing fun, the Ultima SB Dirt Master is the perfect choice. Get ready to experience the purest form of off-road excitement with the Ultima SB Dirt Master. NOTE: Finished kit shown in the photos is for illustrative purposes only. See needed to complete list below for a list of items required to complete the model. Features: Based on a competition-level racing buggy, this unassembled EP buggy kit delivers high performance at a low price. Rear motor design delivers excellent rear tire grip and superior control. Included front/rear tires and wheels demonstrate stability over various types of road surfaces. Classic style body with ageless smart design is equipped with a rear wing that enhances driving stability. Resin main chassis is easy to assemble and exhibits moderate flex characteristics, and can be equipped with standard RC components. Race-proven double-wishbone front and rear suspension is equipped with precision resin oil shocks. Steering mechanism is equipped with a servo saver function that protects the servo from crash shocks. Full bearing specifications as standard greatly improves drive system efficiency. Compatible with optional parts for the Ultima series and racing springs. Driver Set from 2014 Beetle (KYOSCB003B) can be installed to enhance scale realism. Specifications: Length: 380mm Width: 249mm Height: 140mm Weight: 1,450g Wheelbase: 270mm Tire Size: Front:84×28mm Rear:86.5×42mm Gear Ratio: 8.23:1 Includes: (1) Ultima SB Dirt Master 1/10 2WD Electric Buggy Kit (1) Polycarbonate clear body (1) Wing (1) Window mask set Decals Chassis parts Cross wrench Hex wrench?1.5mm/2.0mm? Grease Tires with Tire Inners Wheels Pinion Gear Needed to Complete: (1) 2 Channel R/C System (1) Servo (1) Compatible ESC (1) 540 Size Motor (1) 7.2V Ni-MH Battery or (1) 7.4V Li-Po Battery (1) Compatible Charger Polycarbonate body paint Silicone oil for Shocks Assembly Tools This product was added to our catalog on May 2, 2023

    2 in stock

    $199.99

  • KYOFAB611, 1971 Datsun 240Z Clear Body

    KYOSHO KYOFAB611, 1971 Datsun 240Z Clear Body

    2 in stock

    KYOFAB611, 1971 Datsun 240Z Clear Body Clear body set for 34427 Fazer Mk2 FZ02 Chassis. Fits short chassis Fazer Mk2.

    2 in stock

    $65.99

  • KYO34412T2, Fazer Mk2 Mad Van 1/10 4WD Readyset Monster Truck

    KYOSHO KYO34412T2, Fazer Mk2 Mad Van 1/10 4WD Readyset Monster Truck

    Out of stock

    Designed in the image of an American full-size van, Kyosho's fun MAD VAN model combines retro body styling with a light and sporty chassis for pure R/C enjoyment. The simple design of the FZ02L-BT chassis uses fewer parts for easy maintenance and delivers strength and rigidity through front & rear stiffeners with reinforced ribbing and optimized material formulation on critical parts. In addition, the near symmetrical design and optimal front-rear suspension balance works in combination with the power source to produce excellent control and maneuverability for this type of model. Front and rear differentials, oil shocks and full ball bearing specifications provide performance to compliment its high durability and impact-resistance. Soft compound, wide large-diameter tires with inner foam feature rounded shoulders to produce secure grip, not only off-road, but on sealed surfaces too, so this van can be enjoyed just about anywhere! As the MAD VAN is fully pre-assembled Readyset, only 4 x AA batteries for the transmitter, a battery for the chassis, and a battery charger are required for the fun to begin. Whether going off-road or on-road, the MAD VAN produces dynamic performance to be enjoyed with its own unique style. Required:Battery for ChassisCharger4 x AA size batteries for transmitter Features: Enjoy the direct acceleration of the shaft-driven full-time 4WD (FZ02L-BT) buggy chassis. Factory-assembled Readyset only requires 4 x AA size batteries for the transmitter, a battery for the chassis and battery charger to run. Includes 2.4GHz Syncro KT-231P+ transmitter with throttle trim, steering trim, throttle EPA, and steering dual rate settings. Two-bevel grease-filled gear differentials are equipped as standard on the front and rear. Large size dog bone & cup joints contribute to improved durability and reliability. Strap battery mount allows various battery types to be installed. Specifications: Length: 383mm Width: 323mm Height: 200mm Wheelbase: 273mm Tread (F/R) 250mm/250mm Motor: 550 size G14L

    Out of stock

    $289.99

  • KYO34419T2, Fazer Mk2 FZ02 1969 Chevy El Camino SS 396, Type 2 Cortez Silver, 1/10 Electric 4WD

    KYOSHO KYO34419T2, Fazer Mk2 FZ02 1969 Chevy El Camino SS 396, Type 2 Cortez Silver, 1/10 Electric 4WD

    Out of stock

    For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can't be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Features: New Fazer Mk2 Chassis FZ02 with a longer wheelbase to pursue scale dimensions. New simple and efficient shaft driven 4WD design with improved performance. Light weight and low C of G bathtub style design made of durable glass reinforced 66 nylon material Licensed 1969 Chevy El Camino body! Plastic chrome plated grill and headlights! Tinted clear windows!! LED ready with light buckets! ULTRA SCALE badge!! New scale wheel design with brake rotor parts!! Also includes 0mm offset rotor hubs(Allowing 190mm width)! Vintage style high grip tires and chrome plated rims!! New steering and double wishbone suspension design for superior handling and damping characteristics. Plastic made of durable glass reinforced 66 nylon material. Adjustable caster angle(3 settings). 12mm big bore shocks. Reliable shaft driven 4WD drive train design with slipper clutch. 2 bevel gear type diff system on front and rear. New powerful Kyosho original 550 size 14T brushed motor. New Kyosho Speed House KA060-91W water-proof brushed 60A ESC with Super plug connectors. 2S Li-Po compatible. New high response high torque KS4081-04WP water proof steering servo New Syncro 2.4GHz KT231P+ Radio system

    Out of stock

    $245.99

  • KYOFAW226, TC Carbon Bumper Support, for FAZER MK2

    KYOSHO KYOFAW226, TC Carbon Bumper Support, for FAZER MK2

    1 in stock

    KYOFAW226TC Carbon Bumper Support, for FAZER MK2 Carbon bumper brace for FX02 / 02L chassis. Supports bumper and increases chassis rigidity.    

    1 in stock

    $23.99

  • KYOFA556-68, TC Spur Gear 68 Tooth, FZ02 Fazer Mk2 Touring Car

    KYOSHO KYOFA556-68, TC Spur Gear 68 Tooth, FZ02 Fazer Mk2 Touring Car

    7 in stock

    KYOFA556-68TC Spur Gear 68 Tooth, FZ02 Fazer Mk2 Touring Car Spare parts for the Fazer Mk2 Touring Car    

    7 in stock

    $4.99

  • KYOFAW223, Kyosho Fazer MK2 TC Carbon Rear Shock Stay KYOFAW223, Kyosho Fazer MK2 TC Carbon Rear Shock Stay

    KYOSHO KYOFAW223, Kyosho Fazer MK2 TC Carbon Rear Shock Stay

    Out of stock

    KYOFAW223, Kyosho Fazer MK2 TC Carbon Rear Shock Stay The Kyosho Fazer MK2 TC Carbon Rear Shock Stay is a great option part intended for the Kyosho Hellcat Fazer MK2. Package includes one rear shock stay with hardware. This product was added to our catalog on July 6, 2021

    Out of stock

    $26.99


You have seen 48 out of 92 products

© 2023 Caloosa Trains And Hobbies,

    • Amazon
    • American Express
    • Apple Pay
    • Discover
    • Google Pay
    • Mastercard
    • PayPal
    • Shop Pay
    • Venmo
    • Visa

    Login

    Forgot your password?

    Don't have an account yet?
    Create account