Another solid choice in the Matek F405-miniTE 20x20 Flight Controller by a company that leads the pack when it comes to quality and performance.
Check out all our 20x20 FCs as well as the entire Matek selection!
Features
- F405 has 1MB flash which can run with ArduPilot. even with INAV firmware.
- Redesigned target MATEKF405TE support 8x bi-directional DSHOT.
- Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX
- Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE supports 8motors+3servos in INAV/BF multirotor mixer
- Convertible 20mm to 30.5mm mounting
Specifications
- Input: 6~30V (2~6S LiPo)
- MCU: STM32F405RGT6
- IMU: ICM42688-P
- OSD: AT7456E
- Baro: Goertek SPL06-001 (I2C)
- Blackbox: 16M-byte Flash memory
- UARTs: 6
- PWM outputs: 12 (8 Dshot)
- I2C: 1
- ADC: 4 (VBAT, Current, RSSI, Airspeed)
- Current Sensor: No
- PINIO: 2
- BEC: 5V 1.7A & 10V 1.4A
- Mounting Pattern: 20x20 M2/M3, 30X30 M3
- Weight: 5g
Includes
- 1x Matek F405-miniTE 20x20 Flight Controller
- 1x 20mm to 30mm conversion plate(blue PCB)
- 6x Silicon grommets M4 to M3
- 6x Brass grommets M3 to M2
- 1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC
- 1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit
