Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array of FPV drone models. The PCB board and shell design is more advanced, and the antenna-optimized installation place offers greater protection to the VTX. Dual antennas provide more stable and powerful signals. Using H.265 encoding for industry-leading 1080p images with low latency. Camera V2 delivers 2K pixels, a 4:3 native sensor for enhanced visuals, and a native 4:3 mode ratio so you can capture more of your surroundings in stunning detail. This kit includes the new VTX and camera, coming with 2 antennas.
Warning - Walksnail recommends that when using more than 2s power to use a standalone BEC in between the VTX and power source to conserve the integrity of sensitive electronics.
Features
- Dual antennas
- Compatible 4K
- 1080P 120fps compatibility
- 22ms low latency
- Ranging Mode
- 4KM range
- Lightweight design
- FOV160°
- Built-in 32G storage,
- Support Gyroflow
- 6V-25.2V
- The only native 4:3 high-definition sensor in the FPV industry
- The Avatar HD system uses H.265 code, an industry-leading technology, to provide 1080p FPV image quality with low latency.
- Camera V2 with 2K pixels, 4:3 native sensor for better image quality and native 4:3 mode image ratio allows you to capture more of the surrounding scenery while flying the drone, resulting in more comprehensive and visually appealing images. Meanwhile, it's a better fit for regular FPV races as well.
- The camera ( 32G VTX KIT) supports Gyroflow, take you a smooth and stable video quality.
- The kit includes 20mm x 20mm and 25mm x 25mm mounting holes for greater compatibility with a wider range of FPV drone models.
- Updated the design of PCB board and shell, improved the quality of VTX, more durable.
- Optimized the installation place of the antenna, so as to better protect the VTX.
- The position of the frequency binding button has been changed to make the frequency binding operation more convenient.
- A spare pad is added to provide two power connection modes.
- New VTX with enhanced TVS protection and support for up to 6S. With a wide input voltage the range of 6V to 25.2V, our VTX delivers unmatched stability. Enjoy unparalleled performance and take your FPV adventures to new heights with our cutting-edge technology.
- Model: Avatar V2 module(Dual Antenna)
- Communication Frequency: 725-5.850GHz
- Transmitter Power (EIRP): FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
- 1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
- Mounting Holes: 25.5x25.5mm; 20x20mm
- Dimensions: 33.5x33.5x10.5mm
- Storage: 32G
- Recording: 1080p/720p
- Weight: 15.4g
- Operating Temperature: -20-40℃
- Channels: 8
- Wide Power Input: 6V-25.2V
- Supported FC System: Betaflight; Inav; Fettec; ArduPilot; Kiss
- OSD: Canvas mode
- Latency: Average delay 22ms
- Antenna: 2(IPEX)
Avatar V2 antenna
- Polarization: LHCP
- Bandwidth: 5600MHz-6000MHz
- Gain: 1.9dBi
- VSWR: ≤1.5
- Input Impedance: 50Ω
- Interface: IPEX-1
- Size: R15 X 45mm （without cable）
- Weight: 2g
Includes
- 1x Walksnail Avatar HD Kit V2 20x20 / 25x25 VTX Kit w/ Micro Camera V2 - (Dual Antenna Version)
- 1x USB transfer extension cable
- 1x 4 Pin silicone cable
- 8x M2x4mm screws
- 4x M2x5mm screws
- 4x M2x6mm screws
- 4x M2x14mm screws
- 4x M2x5x0.5mm gasket
