Sign up for our newsletter
Subscribe to our emails
Products
Traxxas (AVAILABLE MID-MARCH) TRA10423, Traxxas EHD Slash Late Model Clear Body
(AVAILABLE MID-MARCH) TRA10423, Traxxas EHD Slash Late Model Clear Body This product was added to our catalog on January 18, 2024
$129.99
Traxxas (Pre-Order) 109076-4, Traxxas Pro Scale Sand Car
109076-4, Traxxas Pro Scale Sand Car Driving a sand car is an adrenaline-fueled thrill ride like nothing else on Earth. Outfitted with 1000+ horsepower engines and trick long-travel suspension systems, sand cars can top 150 mph and wheelie with just a blip of the throttle. The new Traxxas Pro Scale Sand Car is a 55+ mph replica purpose-built to deliver the same raw excitement and thrill of driving the full-size Funco Motorsports car in dramatic X-Series scale. X-Truck Size Both longer and wider than the legendary X-Maxx, the Pro Scale Sand Car is the largest member of the X-Series family. This immense size gives the Sand Car incredible scale detail, authentic driving dynamics, and an imposing presence. The Sand Car’s huge footprint provides extra stability to blast down desert trails and fly over dunes with ease. VXL-8s Power System The Pro Scale Sand Car features Traxxas’ most powerful brushless system, the Velineon VXL-8s speed control and 1200XL motor. The high-performance VXL-8s maximizes power output across the entire rpm range. Bury the throttle at any speed and the Sand Car instantly wheelies until you back off…or run out of desert. Key Features Pro Scale® Replica of the 1000+ hp Funco Motorsports Sand Car Velineon® VXL-8s™ Brushless Power System 55+ mph Top Speed with Included High Speed Gearing New Sand Car Addition to the X-Series™ Lineup High-Speed Belted Sand Paddle Tires for Maximum Forward Bite All-new Rear-Wheel-Drive System with Ultra-HD Steel Gears Powerful Front Disc Brakes Combined with Rear Motor Braking Metal-Gear 2085XL Servo with 25% More Torque Color-Matched Whip Lights with Flex-Tech™ Mounts Ultra-Realistic Scale Body and Precision Details Traxxas Stability Management® for Pro-Level Driving Control Extended-Length Aluminum GT-Maxx® Shocks with Threaded Bodies Long-Travel, Independent Suspension with Polished Aluminum-Finish Arms This product was added to our catalog on March 19, 2025
$1,299.99
RaceDayQuads (PRE-ORDER) BetaFPV RTF Cetus FPV Analog Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case
All PRE-ORDERS shipping ASAP!! All batteries must be shipped by a ground shipping method. Brush up on your FPV skills with the BetaFPV RTF Cetus FPV Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case. You have everything needed to get into FPV, including the LiteRadio 2 SE Transmitter, VR02 FPV Goggles, and the Cetus Whoop. Easy to carry on and ready to fly. What are you waiting for? Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 300mAh - BT2.0 Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features 3 Flight modes Altitude hold and emergency landing functions Storage case FrSky D8 protocol drone and radio Brushed drone, easy to fly Specifications Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 Flight controller: Lite 1S Pro brushed FC VTX: 25mW Camera tilt degree: 25° Camera: C01 FPV Micro Camera Transmitter: Literadio2 SE Transmitter TX mode: Mode 2 (Left stick throttle) Goggles: VR02 Goggles Motor: 716-19000KV Brushed motor Propeller: 31mm 4-blade 0.8mm shaft hole Takeoff weight: 35g(with battery) Power system: 1S Battery: BT2.0 300mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (Clear line of site) Includes 1x Cetus Brushed Quadcopter 1 LiteRadio2 SE Transmitter (Frsky D8 Protocol) 1x VR02 FPV Goggles 2x BT2.0 300mAh 1S Lipo Battery 1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C Adapter 1x Prop Removal Tool 4x 31mm 4-Blade Props 1x Portable Storage Bag User Manual
$239.99
RaceDayQuads (PRE-ORDER) BetaFPV RTF Cetus Pro FPV Analog Kit - Cetus Pro Whoop, Goggles, Transmitter, Batteries, Charger & Case
All PRE-ORDERS shipping ASAP!! All batteries must be shipped by a ground shipping method. The Cetus Pro FPV Kit is finally here! It is the best ideal choice for beginners to advance currently. Comes with a Cetus Pro brushless quadcopter, LiteRadio2 SE transmitter, and VR02 FPV Goggles. It's more powerful and maneuverable for all starters as well as FPV pros to practice indoor and outdoor. Be sure to pick up some extra batteries so that you can fly all day! We recommend the following 1S batteries for this quad: BetaFPV 1S 450mAh - BT2.0 Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features The auxiliary flight function is greatly reducing the threshold of operating. This is the lightest key to open the door to advanced FPV. Cetus Pro quadcopter comes with a brushless power system, it's more powerful and maneuverable in flight. Pilots can achieve more FPV freestyle actions to train. With the self-protection of emergency landing when out of control or in low battery, to ensure a more safe flight. Made of PA12 material, the frame has an excellent impact resistance in drop & impact. Meanwhile, the 360° protection of the whoop frame ensures safe flights both indoors and outdoors. All items needed for the flight are packed in an EVA portable storage bag. Better to protect and convenient to carry. Specifications BetaFPV LiteRadio 2 Frequency Range: 2.4GHz (2403MHz-2447MHz) 2.4G System: NRF24L01 or CC2500 Channel: 8 Support Protocol: Bayang / Futaba S-FHSS / Frsky D16 FCC/ Frsky D16 LBT/ Frsky D8 Power: ≤100mw Adapted Drone Type: Multirotor Support USB Charging / Firmware Update Support BETAFPV Simulator Connected / Customized LiteRadio System / Joystick Calibration LED Light: Green-Power On / Red-Warning / Blue-Normal Battery: Built-in 1000mAh 1S Battery Charging Connector: Type-C BetaFPV VR02 Goggles Screen Size: 4.3" Screen Resolution: 800x480p Screen Brightness: 300cd/m2 Field of View: 55° Charging Port: USB-C Input Voltage: 3.7V 500mA Internal Battery: 3.7V 2000mAH Dimensions: 143x126x86.3mm Weight: 300g BetaFPV RTF Cetus Pro Positioning system: Optical flow / Barometer / Laser Height Positioning: Laser / Barometer Angle Locating: Optical flow ( effective height 0.3-3m) Accuracy of auto-hover: Horizontal ±0.2m, vertical ±0.3m (under no wind environment) Receiver protocol: Frsky D8 VTX: 25mW Camera tilt degree: 25° Camera: C02 FPV Micro Camera Propeller: 40mm 3-blade 1.5mm shaft hole Power system: 1S Battery: BT2.0 450mah 1S Battery (external) Flight time: 4-5min Flight distance: 80m (Clear line of site) Includes 1x Cetus Pro Brushless Quadcopter 1 LiteRadio2 SE Transmitter (Frsky D8 Protocol) 1x VR02 FPV Goggles 2x BT2.0 450mAh 1S Lipo Battery 1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C Adapter 1x Prop Removal Tool 1x Portable Storage Bag
$344.99
Lionel (PRE-ORDER) LNL2533047, Lionel 2533047 O President Trump LEGACY ES44 #4547
(PRE-ORDER) LNL2533047, Lionel 2533047 O President Trump LEGACY ES44 #4547 This is a Pre Order product. Call the Store @ (239) 205-6654 to Pre-Order.Estimated Availability: Wednesday December 31, 2025 Celebrate history on your layout with the Donald J. Trump LEGACY ES44 locomotive, commemorating the inauguration of the 47th President of the United States. Packed with all the impressive LEGACY Diesel features, this powerful locomotive offers exceptional detail and performance. As a Limited Edition, each engine will be uniquely numbered, making it a one-of-a-kind addition to your collection. Don't miss the chance to own this remarkable piece of American heritage! This product was added to our catalog on January 21, 2025
$749.99 $674.99
Traxxas 10411-BLUE, Traxxas Slash Modified 1/10 Body (Blue)
10411-BLUE, Traxxas Slash Modified 1/10 Body (Blue) This product was added to our catalog on January 22, 2025
$139.99
ARRMA ARA310936, Arrma 8S BLX Gasket (4)
ARA310936, Arrma 8S BLX Gasket (4) This is a replacement Arrma 8S-BLX Gasket, intended for use with 8S-BLX Kraton kits. Features: Manufactured from premium gasket material for long-lasting durability and reliable diff sealing Precision manufactured to provide hassle-free servicing Factory manufactured holes for fast and easy location of diff closure screws Includes: (4) Diff Gasket This product was added to our catalog on February 1, 2023
$10.99
ARRMA ARA311024, Arrma BLX GP6 Front Rear Diff Set (45T)
ARA311024, Arrma BLX GP6 Front Rear Diff Set (45T) This is an Arrma GP6 45T Front Rear Diff Set is a pre-assembled replacement unit for servicing your BLX Felony vehicle. Gear Profile 6. This part is intended for use with the ARA311018 Main Input Gear 14T GP6. Features: Factory assembled and filled with 10k cSt silicone oil for fast and efficient servicing Tough steel internal gears for long-lasting durability in all conditions Strong composite diff case 45T GP6 straight cut steel main gear for increased durability under extreme loads Metal cross-shafts and inserts for increased efficiency of fit and long-lasting durability Includes rubber-shielded bearings for fast and efficient fit to your vehicle Includes: (1) Factory Assembled Front or Rear Diff, 45T GP6 (gear profile) Steel Straight Cut Main Gear and 10k cSt Silicone Oil This product was added to our catalog on February 8, 2025
$59.99
ARRMA ARA320453, Arrma 4S BLX Body Post Set
ARA320453, Arrma 4S BLX Body Post Set This is a Arrma Body Post Set for use with the Arrma Kraton, and Outcast 4S BLX 4x4 kits. This high-quality Body Post Set is manufactured from super-tough material that will provide long-lasting durability for your ARRMA vehicle. Features: Strong composite material for hard-wearing performance Precision manufactured mounting holes for added fitting security Multiple body shell mounting heights Large self adjusting platform for the body to sit on provided by the two-piece body mounts Includes: (2) Short body post with fixed platforms (2) Short body posts (2) Medium body posts (2) Long body posts (2) Body post platforms This product was added to our catalog on February 1, 2023
$8.99
ARRMA ARA330655, Arrma Kraton EXB Front Upper Suspension Arms (2)
ARA330655, Arrma Kraton EXB Front Upper Suspension Arms (2) This is a replacement set of Arrma Front Upper Suspension Arms. This is a replacement for the Kraton 6S EXB model, but can be used with the standard 6S BLX Kraton, Mojave, Notorious, Outcast, and Talion kits as an optional upgrade. These Heavy-Duty Front Upper Suspension Arms have been designed ARRMA tough so you can send it high with confidence. Features: Heavy-Duty design with material strategically placed to increase crash resilience Constructed from tough composite material for increased crash resistance and long-lasting durability Precision molded hinge pin holes for smooth slop-free suspension action 120mm between inner hinge pin center and outer end Includes 1mm and 2mm Castor adjustment clips for a range of tuning options Provided in a pair Includes: (1) Front Upper Suspension Arm Left (1) Front Upper Suspension Arm Right (4) Castor Adjustment Clip 1mm (2) Castor Adjustment Clip 2mm This product was added to our catalog on March 14, 2025
$19.99
ARRMA ARA390299, Arrma BLX Motor Heatsink
ARA390299, Arrma BLX Motor Heatsink This is an Arrma BLX Motor Heatsink, intended for use with BLX and Roller models of the Felony, Infraction, Kraton, Limitless, Mojave, and Notorious vehicles. This aluminum Motor Heatsink keeps your motor running cool when the action heats up. Features: Precision manufactured for a perfect fit Black anodized finish with etched ARRMA logo for cool looks Constructed from high-quality light-weight aluminum Multi-fin design increases surface area for efficient heat transfer Flat area allows mounting of 35mm fans Included heatsink clip Suited to 40mm diameter motors Includes: (1) Motor Heatsink (40mm Diameter Motor) (1) Motor Heatsink Clip This product was added to our catalog on December 30, 2022
$24.99
ARRMA ARA713011, Arrma Pin (2) (4x73mm)
ARA713011, Arrma Pin (2) (4x73mm) This product was added to our catalog on December 30, 2021
$6.99
ARRMA ARAC5048, Arrma 4x4 Rear Hub Set (2)
ARAC5048, Arrma 4x4 Rear Hub Set (2)
$5.49
RaceDayQuads Azure Power Johnny Freestyle 4.8x3.8x3 POPO Compatible Tri-Blade 5" Prop 4 Pack - Choose Your Color
AZURE POWER 3 BLADES JOHNNY FREESTYLE, POPO COMPATIBLE With an extremely lightweight feel, smooth performance for the best possible image quality and industry-leading acceleration. Re-designed the airfoil of the blades to have the smoothest possible lift curve to ensure the Johnny freestyle prop have the best freestyle performance. With balance control in the highest standard in the industry, to ensure the drone images are as crisp and jitter free as can possibly be. Making your video juicier! Amazing durability POPO Compatible With this brand new design, the JohnnyFPV Freestyle props will give you the best in smoothness, acceleration, and like all Azure Power props, amazing durability Set to be the new Freestyle standard. Specifications Length: 4.8" Pitch: 3.8 Hub I.D.: 5mm Material: High Grade Polycarbonate Available Color: Orange, Bright Green, Teal, Iron Grey Weight: 3.9g Included: 4x Azure Power Johnny Freestyle 4.8x3.8x3 POPO Compatible Tri-Blade 5" Prop (2CW, 2CCW)
$5.99
RaceDayQuads BayckRC ELRS 2.4GHz Receiver - T Antenna
Stay connected and in control with the BayckRC ELRS Nano Receiver. Designed with a T Antenna, this 2.4GHz receiver ensures steady and reliable signal transmission for your RC device. Experience seamless control and enjoy uninterrupted playtime with this receiver. Features Small size 0.4g weight ELRS open source project, remote control The operation is simple Specifications Name: ExpressLRS Receiver RF: Freq: 2.4Ghz Connector: U.FL IC: SX1281+ESP8285 TX Power: 100mW Color: Black Weight: 0.4g (receiver only) Size: 11mmx18mm Firmware: BAYCKRC 2.4GHz Nano RX Includes 1x BayckRC ELRS 2.4GHz Receiver - T Antenna
$11.99
RaceDayQuads BetaFPV BNF Cetus X Brushless Analog Whoop - ELRS 2.4G
All batteries must be shipped by a ground shipping method. Cetus X Brushless Quadcopter is a 2S power whoop drone and a primary choice for beginners who want to get advanced flight skills. It features a stronger propulsion system for a speedier and more violent flight, which is capable of performing diverse freestyle tricks. Equipped with M04 400mW VTX and C04 FPV camera that is optimized for longer radio and video transmission. Meanwhile, it supports the Betaflight configurator which is a popular application to configure RC aircraft. Check out our other RTF combos, all our pre-built quads and our BetaFPV selection! Features An excellent preference for beginners to get advanced level. Cetus X brushless Quadcopter is proud of its lightning speed with rapid startup due to its stronger propulsion system. Build-in ExpressLRS 2.4G receiver that is the most popular radio link, low latency, and far controlling range are possible. Pilots can not only enjoy the flight indoors but also explore the scenery outdoor. Featuring M04 400mW VTX, C04 FPV camera (based on Caddx Nano Ant Camera or Runcam Nano 4), and 2xBT2.0 450mAh 1S 30C battery for longer radio and video transmission and flight endurance, Cetus X brushless quadcopter allows beginners to gain more achievements in FPV flight. Classical white design inherited from Cetus Series and made of PA12 material, Cetus X frame has an excellent impact resistance in drop & impact. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. Specifications Item: Cetus X Brushless Quadcopter Weight: 55g Wheelbase: 95mm FC*: F4 2S 15A V1.0 (Betaflight FC Version) Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G VTX: M04 25-400mW VTX Battery: 2*BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Downloads FC Firmware and ESC download Includes 1 x Cetus X Brushless Quadcopter 1 x BT2.0 Battery Charger and Voltage Tester 2 x BT2.0 450mAh 1S 30C Battery 1 x Phillips Screwdriver 1 x Prop Removal Tool 1 x Type-C Adapter 4 x Gemfan 2020 4-Blades Props
$194.99
RaceDayQuads BetaFPV RTF Cetus X FPV Analog Kit - Cetus Whoop, Goggles, Transmitter, Batteries, Charger & Case
Whether you're a skillful pilot or a new beginner, the Cetus X FPV Kit is an advanced 2S power whoop bundle, and a primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level of flying FPV. Features Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level. Two FC versions are offered for pilots. With the support of the Betaflight configurator, beginners can learn quadcopter configuration through the Betaflight FC version. For pilots who prefer the classical Cetus, the Cetus FC version with an altitude hold function is also coming soon. Classical white design inherited from Cetus Series and made of PA12 material, the Cetus X frame has an excellent impact resistance in drop & impact and reduces the risk of damage, giving you more peace of mind. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market. The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment. Powerful Propulsion System Equipped with 1103 11000KV Brushless Motors and Gemfan 2020 4-blade props, the Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. The whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience. Recording Every Flight Moment Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience. Improved Video Transmission Cetus X Brushless Quadcopter comes with M04 25-400mW VTX and C04 FPV camera. M04 25-450mW VTX features a lightweight and adjustable output power for long-distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, the C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with the C02 FPV camera. LiteRadio 3 Radio Transmitter This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you. FPV Simulator Supported First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 1 supports playing FPV simulators like DRL/DCL/Uncrashed/Liftoff. LiteRadio 1 is capable of practicing and charging at the same time. Check out the Liftoff flying demonstration here. Download Liftoff here. Various Modes, Accessible to All Cetus X supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one. BETAFPV Cetus Series The BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus Series always satisfies customers' needs no matter new beginners or seasoned pilots. Specification Item: Cetus X FPV Kit Weight: 55g Wheelbase: 95mm FC: F4 2S 15A V1.0 (Betaflight FC Version) Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G (Betaflight)/Frsky D8 (Cetus) VTX: M04 25-400mW VTX Quadcopter: Cetus X Brushless Quadcopter Transmitter: LiteRadio 3 Radio Transmitter Goggles: VR03 FPV Goggles Battery: 2x BT2.0 450mAh 1S 30C Battery Flight time: 5 mins Antennas: U.FL for Quad | RP-SMA for Goggles Includes 1x Cetus X Brushless Quadcopter (Betaflight Firmware, ELRS 2.4G Receiver) 1x LiteRadio 3 Transmitter (ELRS 2.4G) 1x BETAFPV VR03 FPV Goggles 4x BT2.0 450 mAh 1S Lipo Battery 1x BT2.0 Battery Charger and Voltage Tester 1x USB Charging Cable (Type-C) 1x Type-C to FC Adapter 1x Prop Removal Tool 4x Gemfan 2020 4-Blades Prop (Spare Set) 1x Portable Storage Bag FAQ For more info and instructions, please check the User Manual for Cetus X FPV Kit. Please DO NOT configure ESC or Motor settings on the Betaflight configurator. The VR03 FPV goggles do not include a Micro SD card. You should prepare it before using the DVR recording function. The External TX module for LiteRadio 3 should be bought separately. Recommend BETAFPV Nano TX Module.
$449.99
BlackZon BZN540223, Turbo Slyder Battery Pack (LiPo 7.4V, 1000mAh), w/T-Plug
BZN540223, Turbo Slyder Battery Pack (LiPo 7.4V, 1000mAh), w/T-Plug This product was added to our catalog on October 28, 2024 Last Updated: 2/24/2025 SVA
$25.99
CADDXFPV C0CA-GM300, CADDXFPV Gimbal GM3
C0CA-GM300, CADDXFPV Gimbal GM3 CADDXFPV gimbal is designed to work perfectly with Avatar HD Goggles, enabling head tracking functionality. This feature allows the gimbal to follow the movement of your head, making you feel as if you are in the cockpit, enhancing your FPV adventures with unmatched realism and control. The Caddx GM3 Gimbal was developed based on pilot feedback and incorporates the head tracking function of goggles. Caddx's R&D team designed this series of gimbals specifically for FPV cameras to cater to various user needs. The primary goal of the gimbal’s design is to enhance the pilot's experience by providing stable, smooth images, making it easy to capture stunning aerial videos and photos. The head tracking function adds an immersive feeling, turning every flight into an adventure. Features Compatible with Walksnail Avatar Goggles Enhanced FPV Experience Mechanical Stabilization Supports Head Tracking Modes and Sensitivity Controllable Gimbal Quick Assembly Flexibility Specifications Camera Compatibility: 19mm FPV Camera Max Controllable Speed: ±1500°/s Max Controlled Rotational Range: Pitch: ±120° Yaw: ±160° Roll: ±60° Head Tracking Control: Support Static Power Dissipation: 1.5W Control Mode: PWM / UART Image Stabilization: ±0.005° Size: 50x46.5x53mm Voltage: 7~26V Model: GM3 Weight: 46g Includes 1x Caddx GM3 FPV Gimbal 1x Power Cable This product was added to our catalog on January 28, 2025
$144.99
Caboose Industries CAB5202S, Caboose Industries HO-Scale Sprung Ground Throw Multi-Pack (5)
This is the Caboose Industries HO-Scale Sprung Ground Throw Multi-Pack. This package includes five HO-Scale Sprung Ground Throws. The 200S series ground throws are internally sprung stands. Stainless steel springs take up the over travel and maintain tension to hold the movable points against the stock rails of the turn out. These springs make the machines easy to mount to the turnout.Features: Molded of strong, self-lubricating black delrin. External cam provides maximum life and travel. Cam design provides lock on both ends of the throw from 10° above horizontal to the extreme down position. Direct connection to the turnout through a pin on the slide bar. Detent to assist in holding the handle horizontal.
$16.99
CEN Racing CEGCKM0403, CEN M-Sport Ford Puma Rally KAOS CNC Aluminum Motor Heatsink (Black)
CEGCKM0403, CEN M-Sport Ford Puma Rally KAOS CNC Aluminum Motor Heatsink (Black) The Aluminum Motor Heatsink with High Performance Fan is a must-have upgrade for R/C enthusiasts aiming to enhance their vehicle's performance. Designed to maintain cooler motor temperatures, this heatsink ensures optimal power output, improved efficiency, and longer motor life. Manufactured with durable and lightweight 6061 aluminum, it combines functionality with a sleek, anodized finish for added corrosion resistance. This heatsink is compatible with most 540 and 550 motors, making it a versatile solution for various R/C applications. Its easy snap-on installation and efficient heat dissipation allow you to focus on enjoying extended run times and peak performance. Features: Anodized aluminum housing for durability High performance 3D fan cover Efficient heat sink design for superior cooling Lightweight 6061 aluminum construction Corrosion-resistant anodized finish Compatible with most 540 and 550 motors Easy snap-on installation Specifications: Material: 6061 Aluminum Fan Size: 30x30mm Compatibility: Most 540 & 550 motors Includes: (1) Aluminum Motor Heatsink (1) 30x30mm Cooling Fan This product was added to our catalog on March 10, 2025
$12.99
DJI DJI-FPV-GOGGLES-2, DJI FPV Goggles 2
DJI-FPV-GOGGLES-2, DJI FPV Goggles 2 The DJI Goggles 2 provide next-level comfort and convenience. Now smaller, lighter, and equipped with Micro-OLED screens, so you experience outstanding clarity as you navigate the sky! DJI Goggles 2 are compact and ultra-portable. The foldable antenna and lightweight design make them easy to store, comfortable to wear, and suitable for long-term use. With two-hour battery life and super-fast charging speeds, you can always be ready for an immersive flight. Features: Supports MP4 and MOV Video and Audio Playback Formats Smaller, Lighter, and More Comfortable Two Micro-OLED Screens 2 Hour Battery Time Diopter Adjustment DJI Goggles 2 51 FOV GET IN THE PILOT'S SEAT Enjoy next-level comfort and convenience with DJI Goggles 2. Now smaller, lighter, and equipped with Micro-OLED screens, so you experience outstanding clarity as you navigate the sky! Feel every flight with DJI Avata and Goggles 2. The two HD Micro-OLED screens offer stunning clarity and a refresh rate of up to 100 Hz. The goggles present a smooth full-screen live feed in front of your eyes, creating an immersive world of limitless potential. DIOPTER ADJUSTMENT DJI Goggles 2 offer diopter adjustment from +2.0 D to -8.0 D for optimized viewing and comfort. Lock the adjustment knob to fix the diopter in place and prevent accidental touches during use or storage. Specifications DJI GOGGLES 2 Supported Video and Audio Playback Formats: MP4 and MOV (video coding formats: H.264 and H.265; audio format: ACC, PCM) Wi-Fi Transmission Power (EIRP) 2.4 GHz: < 20 dBm (FCC/CE/SRRC/KC) 5.1 GHz [8]: < 20 dBm (FCC/CE/KC) 5.8 GHz [4]: < 20 dBm (FCC/SRRC/KC), < 14 dBm (CE) Transmission Power (EIRP): 2.4 GHz: < 30 dBm (FCC), < 20 dBm (CE/SRRC/KC) 5.8 GHz: < 30 dBm (FCC), < 23 dBm (SRRC), < 14 dBm (CE/KC) Operating Temperature Range: -10° to 40° C (14° to 104° F) Bluetooth Communication Frequency: 2.400-2.4835 GHz Wi-Fi Wireless Streaming: Supports DLNA Protocol Bluetooth Transmission Power (EIRP): < 8 dBm Supported SD Cards: microSD (up to 256 GB) Max Video Transmission Bitrate: 50 Mbps Wi-Fi Communication Frequency: 2.400-2.4835 GHz 5.150-5.250 GHz (indoor use only) 5.725-5.850 GHz Wi-Fi Protocol: Wi-Fi 802.11b/a/g/n/a Power Input: DJI Goggles 2 Battery Bluetooth Protocol: Bluetooth 5.2 Video Recording Format: MOV Communication Frequency 2.400-2.4835 GHz 5.725-5.850 GHz FOV (single screen): 51 DJI GOGGLES 2 BATTERY Charging Temperature Range: 70° to 45° C (32° to 113° F) Max Charging Power: 712.6 W (5 V/2 A, 9 V/1.4 A) Dimensions (L×W×H): 73.04×40.96×26 mm Operating Time: Approx. 2 hours Chemical System LiNiMnCoO2 Weight: Approx. 122 g Voltage: 7-9 V (1.5 A) Capacity: 1800 mAh Energy: 18 Wh Type: Li-ion IMPORTANT NOTES HorizonSteady is only available in Normal mode FOV with an aspect ratio of 16:9 and video recording specification of 4K@50/60fps, 2.7K@50/60fps, or 1080p@50/60fps. RockSteady is unavailable when the video recording specification is 2.7K@100/120fps or 1080p@100/120fps. The 155° FOV is only available when the aspect ratio is 4:3, and the video recording specification is 2.7K@50/60fps or 1080p@50fps/60fps; the aspect ratio is 16:9, and the video recording specification is 4K@50/60fps, 2.7K@50/60fps, or 1080p@50/60fps. DJI Goggles 2 does not support astigmatism correction. If you have specific vision requirements, please consult your doctor before use. The DJI Goggles 2 are not backward compatible with existing DJI Air units or Vista systems. Includes 1x DJI Goggles 2 Dual-Band Antenna (Set of 2) 1x DJI Goggles 2 Eyeglass Frames (Set of 2) 1x DJI Goggles 2 Screen Protector 1x DJI Goggles 2 Power Cable 1x DJI Goggles 2 Headband 1x DJI Goggles 2 Battery 1x DJI Goggles 2 1x OTG Cable This product was added to our catalog on January 18, 2025
$648.99 $448.99
DJI DJI22795, DJI O4 Air Unit Pro
DJI22795, DJI O4 Air Unit Pro Overview New Heights in Transmission, More Freedom in Flight The DJI O4 Air Unit Series is equipped with the DJI O4 video transmission system, achieving ultra-low latency for more responsive controls. Paired with the dual-antenna design of the DJI O4 Air Unit Pro, the max transmission distance can reach up to 15 kilometers. [1] This system can automatically select the most stable frequency. Whether soaring over mountains and rivers or navigating indoor spaces, perform confidently with precision. Crisp and Fluid, Visually Striking The DJI O4 Air Unit Series is capable of recording 4K/60fps video. The video transmission system utilizes H.265 video encoding, supporting high-frame-rate transmission at 1080p/100fps, ensuring clear and smooth real-time imagery. No matter how fast you fly, the camera view keeps up. New Racing Mode: Unleashed Speed, Unlimited Fun The DJI O4 Air Unit Series introduces a new Racing mode, [2] with video transmission latency as low as 15 milliseconds. [3] It supports up to eight aircraft racing simultaneously, [4] taking you on an exhilarating, high-speed journey through the skies. Upgraded Imaging: Cinematic Masterpieces at Your Fingertips The DJI O4 Air Unit features a 1/2-inch image sensor, capable of capturing 4K/60fps video. The DJI O4 Air Unit Pro goes a step further with a 1/1.3-inch image sensor, supporting 4K/120fps video recording. No need for an external action camera to achieve ultra-wide-angle, high-definition footage. Creating stunning visuals has never been so effortless. Even in Intense Light, Create With Confidence The DJI O4 Air Unit Pro Camera Module can be used with the DJI Avata 2 ND Filter Set (ND8/16/32). [5] Even in bright lighting conditions, it ensures balanced exposure and true-to-life colors. This allows you to flexibly control light intake and shutter speed, easily achieving natural motion blur and making your footage more dynamic and impactful. Compatible With Canvas Mode: Your Flights, Your Way Have full control over what's displayed on your screen. The DJI O4 Air Unit Series supports Canvas Mode and Betaflight OSD settings. You can customize the real-time data and layout displayed on your goggles screen, making flight data clear at a glance, and enhancing your control precision. Lightweight Design, Effortless Adaptation The DJI O4 Air Unit Series adopts a lightweight and portable design with extensive compatibility. Specifically, the DJI O4 Air Unit can fit drone frames of 2 inches and smaller, supporting flexible assembly to suit various creative flight scenarios. Experience the thrill of flying while capturing high-quality footage with ease. In The Box DJI O4 Air Unit Pro DJI O4 Air Unit Pro Camera Module × 1 DJI O4 Air Unit Pro Transmission Module × 1 DJI O4 Air Unit Pro Antenna × 2 DJI O4 Air Unit Pro 3-in-1 Cable × 1 This product was added to our catalog on January 18, 2025
$229.00
Exotek EXO2282, Exotek 76mm Rear V3 HD Steel CVD Set for Traxxas Slash
EXO2282, Exotek 76mm Rear V3 HD Steel CVD Set for Traxxas Slash Exotek 76mm Rear V3 HD Steel CVD Set. This is an optional set of CVDs intended for the Traxxas Slash Modified. Featuring larger CVA couplers and a 2.5mm pin, these heavy-duty, hardened steel axles and differential cups deliver unmatched durability and performance. With a reduced parts count and all-steel construction, they provide reliable, deformation-free racing. The improved suspension action reduces axle binding, offering increased traction and smoother movement. The updated differential cups use two set screws to eliminate slop and minimize vibrations, ensuring a more responsive and efficient ride. Package includes everything needed to upgrade your rig. This product was added to our catalog on March 14, 2025
$37.99
EMAX FTH ECO14748, EMAX ECO II Series 2306 1700Kv Motor
The engineers at EMAX are always seeking ways to design the ultimate motor with brushless technology. In their efforts, they produced the ECO II Series, a new line of brushless motors further improving on the performance and durability while retaining the same affordability. Redesigned from the ground up, the ECO II boasts an all new architecture. With a more rounded design paired together with thicker reinforcements, maximum durability is achieved. Finished with a reflective surface, the ECO II offers a sleek modern design destined to satisfy the need for both aesthetics and durability. In order to improve the performance from its predecessor, the ECO II utilizes N52SH arc magnets over prior N48 magnets, allowing more powerful throttle response and higher RPMs to be achieved. More torque and thrust is generated, allowing pilots the flexibility to comfortably meet the demands of any racetrack or flight situation. The ECO 2 Series marks the next evolution in affordable brushless motor technology, bringing in a new era of performance for everyone. Features A brand new design with a rounded bell and stronger attachment points for increased durability. Fully mirror-polished finish that shines and glistens with even the smallest hint of light. Upgraded N25SH curved arc magnets for tighter airgap and better performance. EZO 9mm bearing for unparalleled smooth operation. Specifications Includes 1x EMAX ECO II 2306 1700Kv Motor This product was added to our catalog on February 5, 2025
$16.99
RDQ FTH FTHRDQ1000-22.2-100-XT60, RDQ Series 22.2V 6S 1000mAh 100C LiPo Battery - XT60
All batteries must be shipped by a ground shipping method. Another great 6S option in the RDQ series, along with the 1050, 1250, and 1300. More options mean you can pick the perfect size pack for your build and flying style. Specifications Capacity: 1000mAh Max. Continuous Discharge Rate: 100C Discharge Lead: 80mm, XT60 Balance Lead: 35mm, JST-XH Dimensions: 78x38x24mm Weight: 185g Includes 1x RDQ Series 22.2V 6S 1000mAh 100C LiPo Battery - XT60 This product was added to our catalog on February 5, 2025
$30.49
RDQ FTH FTHRDQ1300-22.2-100, RDQ Series 22.2V 6S 1300mAh 100C LiPo Battery - XT60
All batteries must be shipped by a ground shipping method. The RDQ Series 6S 1300 mAh 100C battery truly sets a new standard in the FPV LiPo market. Containing the latest in battery technology, the RDQ Series LiPo packs a long lasting punch that will redefine your idea of a quality LiPo. With this 6S pack, you'll be able to win and fly hard for the entirety of the most grueling races this sport has to offer. Specifications Capacity: 1300mAh Discharge Rate: 100C Continuous Dimensions: 43x35x89mm Discharge Lead: 85mm, XT60 Balance Lead: 40mm, JST-XH (perfect length for usability and protection) Weight: 243g (+/- 1%) Includes 1x 22.2V 6S 1300mAh 100C LiPo Battery This product was added to our catalog on February 5, 2025
$36.49
ImmersionRC FTH IRC8363, ImmersionRC rapidFIRE w/ Analog PLUS Goggle Receiver Module
The rapidFIRE technology 'fuses' together the images from two 5.8GHz A/V receiver modules into one beautiful, interference-free image. Tearing and rolling are eliminated and our advanced noise-detection algorithms guarantee a clean and stable image at all times. The rapidFIRE module is optimized for use in environments with multi-path interference such as indoor racing, flying in abandoned buildings etc. but also offers superb sensitivity and selectivity outdoors and for long range use. *Now comes with a red cover at no extra cost! Features Compatible with all Dominator LCD goggles including v1, v2, v3, SE, HD1, HD2, HD3, HDO, and Attitude v3/v4. For Attitude and HDO goggles, the module is plug and play. Future-proof with USB port, allowing future firmware updates. Easy menu navigation... no 'single button user interface here', a 5-way joystick is used to scroll around the responsive OLED display, with feedback of critical parameters displayed on the OSD. Built-in spectrum analyzer, favorites channels with live single-channel spectrum display for manual tuning, and band scanning. When used to time races, the rapidFIRE technology eliminates dropped frames from the FatShark DVR. Finally DVR footage can be compared for photo-finishes. Includes 1x ImmersionRC rapid FIRE Goggle Receiver Module 1x rapid FIRE Receiver Module Cover - Red This product was added to our catalog on February 5, 2025
$169.99
SpeedyBee FTH SB19196, SpeedyBee V3 F722 3-6S 30x30 Stack/Combo (F722 FC / 50A 32bit 4in1 ESC)
The SpeedyBee V3 F722 3-6S 30x30 Stack/Combo (F722 FC / 50A 32bit 4in1 ESC) is a marvel to behold. The latest iteration of the SpeedyBee Stack, the V3 is packed with powerful new upgrades. Faster Wi-Fi upgrades, black box retrieval within a minute, supports up to 8 motors, and features soldering pads on one end, and pin connectors on the other in case soldering isn't your thing. The 50A 4in1 ESC is fitted with a high-quality CNC heat sink shield to significantly reduce the heat from your MOSFETs ensuring stable current flow at a high-throttle position. This ESC should have no issues with overheating. A great benefit in a stylish blue finish. Specifications F722 2-6S Flight Controller MCU: STM32F722 IMU: BMI270 USB: Type-C Baro: BMP280 (I2C) OSD: BetaFlight OSD w/ AT7456E chip BLE Support, used for Flight Controller configuration WiFi Support, used for data transfer, e.g firmware flashing, and Blackbox analysis. DJI Air Unit plug: A full DJI Air Unit JST slot onboard BlackBox: 500MB onboard data flash BetaFlight Camera Control Pad: Yes Power input: 3S - 6S Lipo 10 groups of 5V output, three +5V pads and 1 BZ+ pad (used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A. 2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 4A. Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load. Supported. Designed for 3.3V-input receivers. Up to 500mA current load. ESC signal M1 - M4 on bottom side and M5-M8 on front side. UART: 5 sets (UART1, UART2, UART3, UART4, UART6) ESC Telemetry: UART UART4 RX I2C: Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc. LED: Used for WS2812 LED controlled by Betaflight firmware. Buzzer: BZ+ and BZ- pad used for 5V Buzzer Boot button: Yes RSSI input: Yes SmartPort: Supported Support Flight Controller Firmware: BetaFlight(Default), EMUFlight, INAV Target: SPEEDYBEEF7V3 Mounting: 30.5x30.5mm, 4mm hole size Dimension 41(L) x 38(W) x 8.1(H)mm Weight 9g 32Bit 50A 3-6S 4in1 ESC Firmware: SpeedyBee BL32 50A Continuous Current: 50Ax4 Burst Current: 55A(5S) Power input: 3S - 6S LiPo Power output: VBAT Current Sensor: Supported (Scale=490 Offset=0) Mounting: 30.5x0.5mm, 4mm hole size Dimension: 45.6(L)x40(W)x8.8mm(H) Weight: 19.2g with heat sink Includes 1x SpeedyBee BL32 32bit 50A 3-6S 30x30 4in1 ESC This product was added to our catalog on February 5, 2025
$119.99
SpeedyBee FTH SB21075, SpeedyBee F4 Mini 3-6S 20x20 Stack/Combo (F405 FC / 35A 8Bit 4in1 ESC)
The SpeedyBee F4 3-6S 20x20 Stack/Combo (F405 FC / 35A 8bit 4in1 ESC)! Experience feature-rich performance and an unbeatable price for a 20x20 stack. Utilizing an upgraded F405 flight controller chip with better performance than the F411, it features a built-in Bluetooth chip for seamless wireless Betaflight tuning. The board comes with a 4-level battery voltage display, built-in barometer, and supports connectivity to all DJI Air Units. It offers 4 available UART ports, and a dual BEC setup with 5V 2A and 9V 3A outputs. This ESC provides four synchronized outputs with a continuous current of 35A, delivering strong power to drive all 2-4 inch and lightweight 5-inch quadcopters via 4-6S battery. Equipped with a TVS transient suppression diode onboard, it better absorbs surge voltage, providing enhanced protection for the ESC. Features DJI compatible Feature-rich Budget-friendly price point Compatible with M2 and M3 Specifications Product Name: SpeedyBee F405 Mini BLS 35A 20x20 Stack Flight Controller: SpeedyBee F405 Min ESC: SpeedyBee BLS 35A Mini V2 4-in-1 ESC Bluetooth: Supported. Used to connect with the SpeedyBee App for flight controller and ESC parameter configuration. Please make sure the MSP switch on UART 4 is turned on and set to a baud rate of 115200, otherwise Bluetooth functionality will not be available. WiFi: NOT Supported Wireless FC Firmware Flashing: NOT Supported Wireless: Blackbox Download & Analysis NOT Supported Power Input: 3-6S LiPo Mounting: 20 x 20mm 3.5mm hole size， Compatible with M2 and M3 screws/Silicone grommets Dimension: 32mm(L) x 35mm(W) x 14.2mm(H) Weight: 13.5g SpeedyBee F405 V3 30x30 Flight Controller MCU: STM32F405 IMU(Gyro): ICM42688PUSB Port Type: Type-C Barometer: Built-in OSD Chip: AT7456E chip BLE Bluetooth: Supported. Used to connect with the SpeedyBee App for flight controller and ESC parameter configuration. Please make sure the MSP switch on UART 4 is turned on and set to a baud rate of 115200, otherwise Bluetooth functionality will not be available. Wireless FC Firmware Flashing: NOT Supported. Please connect to the Betaflight configurator on the PC to do FC firmeare update Wireless Blackbox Download & Analysis: NOT Supported. Please connect to the Betaflight configurator on the PC to do blackbox analysis. WIFI: Not supported DJI Air Unit Connection Way: Direct soldering DJI Air Unit Compatibility: Compatible with all DJI Air Units: DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1. Please use the solder pads < 9V, G, T1, R1, G, SUBS(R2) > on the front right corner of the flight controller to make a pin-to-pin connection with the solder pads on the DJI Air Unit. UART1(T1, R1) is used for OSD and SUBS(R2) is used for DJI Air Unit’s internal SBUS receiver signal input. Blackbox: 8MB Onboard Flash BetaFlight Camera Control Pad: Yes(CC pad on the front side) Current Sensor Input: Supported. For SpeedyBee BLS 35A V2 ESC, please set Scale=250 and Offset=-500. Power Input: 3-6S LiPo. The flight controller is powered through the G, V wires of the 8pin harness or G, V pads from the bottom side of the flight controller. 5V Output: 4 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side. The total current load is 2A. 9V Output: 1 group of 9V output, one +9V pad on front side. The total current load is 3A. 3.3V Output: Supported. Soldering pad named ‘3V3’ on the front top of the flight controller. Designed for 3.3V input receivers. Up to 500mA current load. 4.5V Output: Supported. Designed for radio receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load. ESC Signal: M1 - M4 wires or soldering pads on bottom side. UART: 6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection)), UART5(Dedicated for ESC telemetry),UART6 ESC Telemetry: UART R5(UART5) I2C: Supported. DA & CL pads on front side. Used for magnetometer, sonar, etc Traditional Betaflight LED Pad: Supported. 5V, G and LED pads on bottom of the front side. Used for WS2812 LEDs controlled by the Betaflight firmware. Buzzer: BZ+ and BZ- pad used for 5V Buzzer BOOT Button: Supported. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. RSSI Input: Not Supported Smart Port / F.Port: Not Supported Supported Flight Controller Firmware BetaFlight(Default), INAV Firmware Target Name: SPEEDYBEEF405MINI Mounting: 20 x 20mm 3.5mm hole diameter, Compatible with M2 and M3 screws/Silicone grommets. Dimension: 30(L) x 32(W) x 7.8(H)mm Weight 9.6g SpeedyBee 35A BLHeli_S Mini V2 4-in-1 ESC Firmware: BLHeli_S J-H-40 Continuous Current: 35A x 4 Burst Current: 45A(5seconds) ESC Protocol: DSHOT300/600 Power Input: 3-6S LiPo Power Output: VBAT(Battery voltage, used to power the flight controller) Current Sensor: Support (Scale=250 Offset=-500) Mounting: 20 x 20mm ∅3.5mm hole size, compatible with M2 and M3 screws/Silicone grommets. Dimension: 35 x 35 x 5.5mm Weight: 7.2g Includes 1x SpeedyBee F4 3-6S 20x20 Stack/Combo (F405 FC / 35A 8bit 4in1 ESC) This product was added to our catalog on February 5, 2025
$59.99
CADDXFPV FTH WN02-FP003, Walksnail Avatar HD Goggles X
WN02-FP003, Walksnail Avatar HD Goggles X The Walksnail Avatar HD Goggles X is set to transform the world of HD FPV goggles by introducing a wide array of features and enhancements compared to its forerunner. The Avatar Goggles X is vying for the crown as the most adaptable FPV Goggles, offering compatibility with Walksnail, Analog, and even HDZero systems, all at a reduced cost! This product was added to our catalog on January 18, 2025
$458.99
Gens Ace GEAD300533S60GT, Gens Ace G-Tech Smart 3S Bundle w/Two 3S 60C EC5 LiPo Batteries (5300mAh) & IMars D300 Charger
Gens Ace G-Tech Smart 3S Bundle w/Two 3S 60C EC5 LiPo Batteries (5300mAh) & IMars D300 Charger This is the G-Tech Smart 3S Bundle with Two 3S 60C EC5 LiPo Batteries and IMars D300 Charger. The Gens Ace Imars D300 G-Tech Smart Dual AC/DC Charger is a highly versatile and powerful charging solution designed for ease of use and portability. This compact charger features a sleek design and includes a wide IPS display for clear viewing. It supports dual-channel smart balance charging with impressive charge rates up to sixteen amps on one channel. The Imars D300 is compatible with worldwide voltages and provides three hundred watts of AC power or seven hundred watts of DC power, making it ideal for various charging needs. Additionally, it includes advanced safety features like short circuit and overcharge protection, ensuring reliable and safe operation. Gens Ace batteries have been proven within the Radio Control community to deliver reliable and consistent performance for all modelers alike. All Gens Ace batteries offer superior cell matching at the factory, and are extremely consistent in selecting matched cells after each and every batch produced. Additionally, low internal resistance (IR), offers modelers stable voltage output through the whole duration of the battery. Features: Dual Channel AC/DC Smart Balance Charger Small, lightweight design with wide IPS display Two-in-one fast charging capability Advanced safety with heat dissipation system Includes two G-Tech Smart 3S Batteries Multiple charge leads for a wide range of connector compatibility Smart G-Tech technology allows for adjusting parameters to improve safety Uses Smart G-Tech technology to protect and extend battery life IMPORTANT LITHIUM POLYMER SAFETY INFORMATION DO NOT leave a battery in your model when charging DO NOT leave lithium batteries unattended when charging ALWAYS balance charge lithium battery ALWAYS use a LiPo Safe charging bag/box YOU MUST use a Li-Poly specific charger to charge lithium batteries (NiMH or NiCD only chargers WILL NOT WORK!) YOU MUST not over discharge lithium battery packs READ & UNDERSTAND the instructions carefully before operating this battery NOTE: When using high energy Li-Polymer Batteries, please do not over-discharge or over-charge batteries as this will result in overheated batteries. Discharging capacity can't exceed 80% of the max capacity of the pack after full charging to ensure a good cycle performance. It is recommended to fully charge a brand new battery before using and only discharge the battery 50% for the first 5 cycles. Always monitor race time and/or set a low voltage warning on ESC (End voltage cannot be lower than 3.2v per cell). Do not use a battery that has too low a voltage. Do not expose batteries to sunshine or store/charge batteries at temperatures above 35°C or in a closed car. The high-temperature environment could cause damage to the pack or make it burst. If the battery becomes hot while fast charging, high current discharging, or racing, do not charge it until it has cooled completely. Wait about 20 mins, then inspect prior to recharging. This product was added to our catalog on December 25, 2024
$259.99
Hot Racing Hot Racing 1/10 Aluminum EZ Pulls w/Body Clips (4)
Upgrade your R/C experience with our premium Aluminum EZ Pulls with Body Clips, designed for 1/10 scale models. These high-quality accessories not only enhance functionality but also add a vibrant touch to your vehicle. Crafted from durable CNC-machined aluminum, these pulls ensure lasting performance and reliability. Each set includes four EZ Pulls and eight body clips, making it easy to attach and detach your body without the hassle of fumbling with standard clips. Features: CNC machined from robust aluminum for durability Anodized in a variety of eye-catching colors for added style Designed for effortless removal of body clips Specifications: EZ Pulls: 0.4 x 0.71 (10 x 18mm) Body Clips: 0.35 x 1.02 (08 x 22mm) Includes: (4) EZ Pulls (8) Body Clips Whether you’re looking to upgrade your existing setup or add a splash of color to your collection, these EZ Pulls are the perfect choice. With their sleek design and practical functionality, they simplify the process of body removal, allowing you to focus on what truly matters—enjoying your R/C adventures. Elevate your vehicle's performance and aesthetics with these essential accessories today! This product was added to our catalog on December 16, 2024 Updated 3/4/2025 SVA
$6.99
HQ Prop HQ Prop V2S Freestyle 5x4.3x3 Tri-Blade 5" Prop 4 Pack - Choose Your Color
Specifications Propeller Diameter: 5 inch Pitch : 4.3 Blades : 3 Material : Poly Carbonate Weight : 3.8g Hub Diameter : 12.8mm Hub Thickness:6.5mm Shaft :5mm Adaptor Rings : NO Includes 4x HQ Prop V2S Freestyle 5x4.3x3 Tri-Blade 5" Prop 4 Pack - Choose Your Color
$4.49
LOSI LOS-2310, Losi Promoto-SM FXR Supermoto RTR 1/4 Brushless Motorcycle (White/FRX) w/2.4GHz Radio, Battery & Charger
LOS-2310, Losi Promoto-SM FXR Supermoto RTR 1/4 Brushless Motorcycle (White/FRX) w/2.4GHz Radio, Battery & Charger Realistic R/C Supermoto Experience The Losi Promoto-SM Ready to Run 1/4 Brushless Supermoto has been designed to tear up the streets. This Supermoto comes out of the box equipped with Pro-Line Racing OE Supermoto Street Tires. Built on the Promoto-MX platform with a ton of updates, the Promoto-SM gives users the most authentic supermoto experience an RC bike can offer. Updated Suspension and Brakes The front brake has received major updates with a redesigned caliper and floating piston to apply pressure to a larger surface area. The lean bars have also been updated and are mounted on a bearing allowing for better traction on hard surfaces. The Promoto platform is a fluid-filled friction chamber between the upper and lower head tube bearings. The chamber is filled with heavy 500,000cSt which dampens the servo saver well and helps to control any possible "head shake.” Three Driving Modes The included DX3PM transmitter comes from the factory with three distinct modes. Using the toggle on the side of the transmitter, you can change between Dirt Mode, Street Mode, and Wheelie Control. Dirt Mode gives the bike enough power to rip around and ride the back tire without "Wheelie-Overs". Street Mode senses when the bike starts to pitch up and clips the throttle quickly ensuring maximum acceleration. Wheelie Control Mode lets you Braap it up by keeping the front tire off the ground for as long as you want. Electronics To give the bike a real gyroscopic feel, a motor is placed at the bottom of the chassis spinning a flywheel at over 22,000 RPM. The driving motor is a Spektrum Firma 3652 3800kV 4-Pole Brushless Motor powered by a Spektrum Firma 85A Brushless Smart Motorcycle ESC. Slap your battery in this Supermoto and get out and braap it up! Features: Updated cable-driven front disc brake Frame-integrated, high-RPM flywheel Chain drive with dual disc performance slipper clutch Officially licensed FXR graphics and rider gear Pro-Line OE Supermoto Tires Three drive modes Dirt, Street, and Wheelie mode Collapsible front crash structure Patent-pending Spektrum MS6X technology Updated lean bars for maximum traction This product was added to our catalog on February 8 , 2025
$599.99
LOSI LOS212030, Losi 1970 Mini Drag Dogbone (2)
LOS212030, Losi 1970 Mini Drag Dogbone (2) Losi 1970 Mini Drag Dogbone. These replacement dogbones are intended for the Losi 1/16 Mini Drag Car. Package includes two dogbones. This product was added to our catalog on February 1, 2023
$12.99
RadioMaster RadioMaster Boxer Max EdgeTX RC Transmitter - ELRS 2.4GHz - Choose Your Version
The Boxer Max Radio features a carbon fiber pattern case with AG01 hall gimbals, CNC buttons, and a roller for standard use. It also includes an adjustable CNC metal folding handle with upgraded leather grips and a RadioMaster neck strap for added comfort. Experience superior performance with the Boxer Max Radio! Check out our RadioMaster collection and all our RC transmitters! Features Optional 3 colors - Black/Red/Gold AG01 hall gimbals installed Carbon fiber pattern case CNC buttons and roller as standard Adjustable length CNC metal folding stand Upgraded black leather grips Available with built-in ExpressLRS RF modules Featuring a powerful STM32F407VGT6 with 1MB Flash and 192KB RAM Preinstalled EdgeTX firmware Internal ELRS module capable of 1,000Hz refresh rate Adjustable ELRS RF output QC3.0 fast charging support 2.0A MAX Compact design with excellent ergonomics New low-profile latching SE switch and momentary SF switch Oversized battery compartment- Space for a 2S 6200mAh pack, up to 20-hour duration (Batteries not included) Standard JR module compartment Internal module cooling fan built in (ELRS version) RadioMaster standardized button layout Versatile 6-position switch for flight mode access Adjustable and Removable T-shape Antenna Industry-first fabric handle for improved portability Changeable, ergonomic grips Redesigned SD card slot with new and improved 512mb pre-loaded SD card included External module power slots in the battery cover RadioMaster signature carry case and gimbal protector are included as standard to ensure your radio stays safe while on the move. EdgeTX Operating System and ExpressLRS RF system pre-installed Preinstalled with EdgeTX and ExpressLRS, the BOXER has cutting edge software fit for its class-leading hardware. RadioMaster works closely with the EdgeTX and ExpressLRS teams to develop features and optimize the user experience. We will continue to contribute and support projects like EdgeTX and ExpressLRS, ensuring the concepts of open standards are carried forward into the future. Specifications Item: BOXER Max Radio Color: Black/Red/Gold Size: 235x178x77mm Weight: 532.5g Frequency: 2.400GHz-2.480GHz Internal RF: ELRS 2.4GHz Supported protocols: Module dependent Cooling fan: Built-in (ELRS version) Voltage Range: 6.6-8.4V DC Radio Firmware: EdgeTX (Transmitter) / ELRS (RF module) Channels: Max 16 channels (Receiver dependent) Battery: 7.4V 2-cell Lithium-Polymer / Two 3.7V 18650 Lithium-Ion cells (batteries not included) Display: 128*64 Monochrome LCD display Gimbal: AG01 CNC Hall Gimbal External module: JR / FrSKY / Crossfire compatible Upgrade Method: USB / SD card & EdgeTX Companion PC software BONUS: Radiomaster neck strap and CNC adjustable stand Includes 1x RadioMaster Boxer Max EdgeTX RC Transmitter - ELRS 2.4GHz - Choose Your Version 1x Signature Carry Case 1x T Antenna 1x USB-C Cable 1x Gimbal Protector 1x 1.5mm Allen Key 2x M4x4 Screws 4x Low Tension Springs 1x Stickers 1x Manual 1x 18650 Battery tray (Batteries not included) 1x RadioMaster Neck Strap 1x Boxer KeyChain 1x Screen Protector
$389.99
RadioMaster RadioMaster Pocket Crush RC Transmitter - ELRS 2.4GHz - Choose Your Color
Pre-Orders shipping ASAP! The next Crush line is here from RadioMaster! The Pocket Crush is now available in seven stunning colors—' Iron Grey,' 'Frost White,' 'Mint Mist,' 'Hot Pink,' 'Cherry Red,' 'Iceberg Blue,' and 'Lemon Twist Yellow'— each designed to inspire and excite. Your favorite "fun-sized" radio can now match the whole drone fleet! Check out all our RC Transmitters and our entire RadioMaster selection! Features Enhanced Connectivity Vibrant Color Options Durable Construction Hall Effect Gimbals Intuitive Interface Stylish Aesthetics Compact Design Ergonomic Grip Specifications Module Bay: Nano size (Compatible with RadioMaster Nano-size modules, TBS Nano Crossfire/Nano Tracer) Physical Dimensions: 156.6 x 65.1 x 125.3 mm (Folded size) / 156.6 x 73.1 x 154.8 mm (Unfolded size) Upgradable Firmware: Via USB or the included SD card Control Channels: Maximum 16 (Receiver dependent) Operating Frequency: 2.400 GHz – 2.480 GHz Battery: 2 pcs 18650 batteries (Not included) Supported Protocols: Module dependent Charging: Built-in USB-C QC3 charging Display: 128 x 64 Monochrome LCD Control Distance: >2 km @ 20 dBm Internal RF Options: ELRS 2.4 GHz Operating System: EdgeTx Weight: 288 grams Gimbal: Hall-effect RF Power Operational Voltage: 6.6 – 8.4 V DC ELRS EU-LBT: 20 dBm max ELRS FCC: 24 dBm max CC2500: 20 dBm max Includes 1x RadioMaster Pocket Crush RC Transmitter - ELRS 2.4GHz - Choose Your Color 4x Low Tension Springs 1x Custom Carry Pouch 1x Screen Protector 1x Manual 1x Sticker
$97.49
RaceDayQuads RadioMaster TX16S MKII EdgeTX RC Transmitter w/ V4.0 Hall Gimbals - MCK RGB Transparent Edition - ELRS 2.4GHz
Elevate your FPV drone experience with the RadioMaster TX16S MKII Radio Transmitter - MCK RGB Transparent Edition. A community favorite controller known for its precision and comfort remade in a stylish new way. This transmitter comes with full-size V4.0 Hall transparent gimbals. Enjoy the improved non-slip grip and precise control thanks to the updated sticky360 gimbal stick ends. Enjoy built-in RGB LED lighting effects with 4 modes and 5 colors, all housed in a special Transparent MCK Edition with a CNC metal folding handle. A controller like this will stand out while flying at night. Elevate your FPV drone experience with this MCK Radio! Check out our RadioMaster collection and all our RC transmitters! Features Updated sticky360 gimbal stick ends to bring you a comfortable, non-slip experience. Built-in RGB LED Lighting effects with 4 modes and 5 colors. Clear Crystal Case and surrounding RGB lights design, experience the Heartbeat of Technology Improved internal circuitry and optimized power supply New charge circuitry with integrated reverse-polarity protection Optimized charge IC now allows up to 2.2A internal USB-C charge current Rear-mounted audio jack provided a headphone output V4.0 Gimbal improved centering and temperature stability Optional high/low rear grips are included for improved ergonomics Improved S1/S2 knobs with clear centre-detents Improved LS/RS Sliders with a smoother feel and better center detents Redesigned battery cover for improved battery access Retooled body shell with improved fit and finish Trainer socket changed to the standard TRS 3.5mm socket Rear DIY Socket was added for personalized mods Improved internal plastics for better longevity Special Transparent MCK Edition CNC metal folding handle Specifications Edition: TX16S MKII MCK Transparent Protocol: ELRS LED: RGB Item: TX16S MKII Radio Transparent Version Size: 287x129x184mm Weight: 750g (without battery) Transmission frequency: 2.400GHz-2.480GHz Transmitter module: Internal ELRS (SX1280) SD card: Newly updated 512MB card as standard Working current: 400mA Working voltage: 6.6-8.4v DC Radio firmware: EdgeTX Module Firmware: ExpressLRS (ELRS) Channels: Up to 16 channels (depending on the receiver) Display: 4.3-inch TFT full-colour touch display with a resolution of 480 * 272 Gimbal: V4.0 Hall sensor Module Bay: JR-compatible module bay Upgrade method: Supports USB-C online / SD card offline upgrade Includes 1x RadioMaster TX16S MKII Radio Transmitter - MCK RGB Transparent Edition - ELRS 1x 18650 Battery Tray (Batteries Not Included) 4x Low-Tension Springs 1x Screen Protector Set 1x Raised Grips Set 1x Flat Grips Set 1x USB-C Cable 1x Allen Key 1x Sticker Set 1x Neck Strap 1x Keychain
$374.99
RaceDayQuads RDQ Series 22.8V 6S 1500mAh 120C LiHV Battery - XT60
All batteries must be shipped by a ground shipping method. RDQ Series Lipos are known and loved by the community for their strong performance and solid reliability flight after flight, all while offering an unmatched level of value! Specifications Capacity: 1500mAh Continuous Discharge Rate: 120C Dimensions: 38x38x79mm Balance Lead: JST-XH, 40mm Discharge Lead: XT60, 75mm Weight: 218g (+/- 1%) Includes 1x RDQ Series 22.2V 6S 1500mAh 120C LiPo Battery - XT60
$58.49
RadioMaster RM-HP0157.RX-ER5CI, RadioMaster ER5Ci Express ELRS 5-Channel 2.4GHz Receiver
RM-HP0157.RX-ER5CI, RadioMaster ER5Ci Express ELRS 5-Channel 2.4GHz Receiver RadioMaster ER5Ci Express ELRS 5-Channel 2.4GHz Receiver. The RadioMaster ER5C-i receiver is based on the high-performance, revolutionary ExpressLRS system, featuring high reliability, highly flexible configuration, ultra-fast response speeds, and an ultra-long receiving range! The ER5C-i ELRS receiver can drive up to 5 servos and has built-in receiver voltage telemetry and battery telemetry with the ability to automatically detect which voltage input to use. The ER5C-i features a built-in high-sensitivity ceramic antenna, that is designed for all types of surface models and provides a clean install without antenna wires to worry about! Features: Compatible with all 2.4GHz ExpressLRS modules and transmitters with built-in 2.4GHz ExpressLRS Built-in high-sensitivity ceramic antenna Based on the Revolutionary ExpressLRS System High performance, high reliability, flexible configuration, fast response speed and ultra-long range Automatically detects voltage telemetry of external battery voltage or receiver battery / ESC BEC voltage Optimized ground up PCB design Supports Wi-Fi updates and WEBUI configuration Built-in a TCXO (temperature compensated crystal oscillator), ensures stable and accurate performance in any environment Designed for all types of surface models Extremely lightweight and compact Specifications: Input Voltage: DC 4.5 - 8.4V Channels: 5CH PWM Frequency Range: 2400-2483.5Mhz Wireless protocol: ExpressLRS 3.3.0 pre-installed Telemetry Power: 10mW Antenna Type: Built-in high-sensitivity ceramic antenna Dimensions: 30x18.5x13mm Weight: 5g Battery voltage detection range: DC 4.0-35V Includes: (1) ER5C-i Receiver (1) Manual (1) Voltage telemetry wire This product was added to our catalog on January 30, 2025
$23.99
SpeedyBee SpeedyBee Master 5 HD 5" Freestyle Frame Kit
Introducing SpeedyBee's Master 5 series, designed specifically for freestyle. The innovative anti-shock fixed stack structure mitigates the effect of the motor for Gyro of FC, further stabilizing the running environment. And the arm's quick-release structure brings convenience for installation, with the number of screws averaging 1.5 per arm. Honeycomb-shaped aluminum alloy CNC drone head ensures a better look and strength. Designed with H-FOV 130 section, it provides a larger field of view. Furthermore, the detachable camera fixing plate is open for modification, supporting more mounting holes for the camera and helping get rid of vignetting. Honeycomb-shaped aluminum alloy cooling module (optional) is also designed for mounting under the VTX, improving the operation stability of DJI FPV and high-power analog VTX. Available in 2 versions. The regular Master 5 frame has a 222mm wheelbase and is compatible with analog, DJI O3 Air Unit, and the Vista/Link Air Unit. The Master 5 HD Frame has a wider 225mm wheelbase and is compatible with analog, DJI O3 Air Unit, Vista/Link Air Unit, and the original DJI Air Unit. This is the regular Master 5 frame which is suitable for both analog and digital VTXs but props may be visible in certain configurations with this version Features Compact Model Design with Low Center of Gravity Honeycomb-shaped CNC Aluminum alloy Camera plates FOV130° Innovative Independent Anti-Shock Stack Fixed Structure for stabilization High-power VTX cooling Module Front XT60 Plug Arm Quick-Release Specifications Model: Speedy Bee Master 5 Frame Weight: 130g Top & Bottom Plate thickness: 2mm Arm thickness: 5mm Camera width: supports 19-20mm width 3D printed TPU Parts: Yellow Suitable prop size: 5", 5.1" FC mounting holes: 30.5 x 30.5mm and 20x20mm (M3) VTX mounting holes: 20x20mm (M2) Manual SpeedyBee Master 5 HD Installation Guidelines
$104.99
SpeedyBee SpeedyBee Master 5 HD 5" Replacement Arm (1pc)
Replacement arm for the SpeedyBee's Master 5 HD 5" Frame. Includes 1x SpeedyBee Master 5 HD 5" Replacement Arm
$6.99
Spektrum SPMR6655, Spektrum RC DX6e 6-Channel Full Range DSMX® Transmitter (Transmitter Only)
SPMR6655, Spektrum RC DX6e 6-Channel Full Range DSMX® Transmitter (Transmitter Only) The Spektrum™ DX6e Six-Channel Full Range DSMX® Transmitter combines innovative features with versatile programming options to suit a variety of RC models. From airplanes and helicopters to sailplanes and multirotors, this transmitter offers unparalleled control and convenience. Its robust design incorporates advanced technologies like built-in telemetry*, a patent-pending gimbal system, and wireless trainer linking, making it an ideal choice for pilots at any skill level. With support for up to 250 models, the DX6e provides flexibility and functionality that elevate your RC experience. This product was added to our catalog on August 9, 2023
$249.99
Spektrum SPMX50006S50, 22.2V 5000mAh 6S 50C Smart LiPo Battery: IC5
SPMX50006S50, 22.2V 5000mAh 6S 50C Smart LiPo Battery: IC5 This product was added to our catalog on March 13, 2025
$154.99
Scale Reflex SRF700550, Scale Reflex Servo Y-Harness (80mm)
SRF700550, Scale Reflex Servo Y-Harness (80mm) Scale Reflex Servo Y-Harness. This 80mm Y-harness has two female and one male connector, perfect for running leds. Package includes one Y-harness. This product was added to our catalog on March 10, 2025
$9.99
Tattu Tattu R-Line Version 4.0 22.2V 6S 1050mAh 130C LiPo Battery - XT60
All batteries must be shipped by a ground shipping method. Tattu R-Line Version 4.0 1050mAh 22.2V 130C 6S1P LiPo battery pack is the updated version of R-Line series in 2020. With More Punch, Lower Internal Resistance and Less weight, Tattu R-line V4 definitely dominate all your races. What is R-Line? R-Line is a brand new product line specifically designed for professional FPV racing competitions. It's the selling version of Toppilot batteries. It's also a subsidiary of the Tattu brand. It's got higher capacity, lower internal resistance, and lower landing temperatures. They are more powerful than any graphene battery. Generally, R-Line batteries have the same specs as our popular Toppilot batteries. There are different R-Line versions for the needs of different FPV racing competitions. Features High quality, reliable power Stable automatic stacking technology enables single-cell capacities of 1050mAh Higher capacity than comparable size packs Very high C rate. Designed for professional FPV racing No memory effect. Local after-sales service (Located in Dublin, CA) Specifications Minimum Capacity: 1050mAh Configuration: 6S1P / 22.2V / 6 Cells Discharge Rate: 130C Max Burst Discharge Rate: 260C Charge Plug: JST-XHR Discharge Plug: XT60 Dimensions:78mm x 40mm x 34mm (L x W x H) Net Weight(±20g): 180g Includes 1x Tattu R-Line Version 4.0 22.2V 6S 1050mAh 130C LiPo Battery - XT60
$50.99
Traxxas TRA10259-RED, Traxxas Maxx Slash/WideMaxx Motor Plate, 6061-T6 Aluminum Red
TRA10259-RED, Traxxas Maxx Slash/WideMaxx Motor Plate, 6061-T6 Aluminum Red This item was added to our catalog January 12, 2025
$9.99