Introducing GEPRC's take on the best budget stack out there on the market!
GEPRC TAKER F405 BLS 50A STACK is a plug-and-play stack system specially designed for DJI Air Unit. With the STM32F405 chip, ICM42688-P gyroscope, 16M black box and GEP-BLS50A-4IN1 ESC, you can enjoy a smooth and effortless user experience. This stack system connects to the DJI Air Unit with no soldering required, plus the upgraded Type-C USB connector increases the lifespan of the socket and reduces the risk of poor contact. The 9V 2.5A + 5V 3A dual independent BEC ensures a reliable power supply for any external device you might need.
Check out all our 30x30 stacks & combos, as well as the rest of our GEPRC selection.
Features
- Use mainstream STM32F405 chip
- Equipped with the latest 42688-P gyroscope
- 16M black box storage
- Integrated LC filter
- Upgrade type-C USB interface
- Directly plugged into the DJI Air Unit
- With GEP-BLS50A-4IN1 ESC, the flying feel is silky
- A simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
- 9V 2.5A + 5V 3A dual independent BEC
Specifications
GEP-F405-HD V2 Flight Controller
- MCU: STM32F405
- IMU: ICM42688-P(SPI)
- Air Unit Connection: Direct plugging into DJI Air Unit
- Black Box: 16M onboard
- USB Connector: Type-C
- OSD: BetaFlight OSD w/ AT7456E chip
- BEC: 5V,9V dual BEC
- Firmware Target: GEPRCF405
- Size: 36.8×36.8mm, hole 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
- Input Voltage: 3-6S LiPo
- UART: 6
- Power Filter: Integrated LC filter
- Weight: 7.7g
GEP-BLS50A-4IN1 ESC
- Input Voltage: 3-6S Lipo
- Galvanometer: Support
- Continuous Current: 50A
- Burst Current: 55A（5s）
- Support Protocol: Oneshot125/Oneshot42/Mulishot modes/Dshot 150/300/600
- Size: 42.9×39.7mm, hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing circle.
- Weight:13.7g
- Target: G_H_30
Includes
-
1x Flight Controller
-
1x ESC
-
1x Capacitor
-
1x DJI Air Unit Adapter Cable
-
1x Flight Controller Adapter Cable
-
1x XT60 Power cable
-
4x M3x30 Screws
-
4x M3x24 Screws
-
8x Nylon nuts
-
8x Silicone grommets
-
2x sh1.0 4pinsilicone cable
- 1x Camera connection cable
