CEG8993, Ford F250 1/10 4WD KG1 Edition Lifted Truck, Burnt Copper - RTR

Description

CEG8993, Ford F250 1/10 4WD KG1 Edition Lifted Truck, Burnt Copper - RTR

 

RGB LED Light: Standard Under Fender Multicolor RGB LED.

ESC: 40A WP-1040-Brushed (By HobbyWing)

  • Water-Proof and Dust-Proof for All Weather.
  • Built-In Capacitor Module.
  • Automatic Throttle Range Calibration.
  • Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
  • Over-Heat Protection and Throttle Signal Loss Protection.

Motor: RS-540 High Torque Brushed Motor.

Servo: 12Kg Metal Gear Servo (By Savox)

  • 4.8V - 0.26 sec/60 10.0 kg-cm.
  • 6.0V - 0.23 sec/60 12.0 kg-cm.
  • 25T Horn Gear Spline.

Radio System: Pistol-Grip Mod-3S 3 Channel Transmitter and Receiver

  • Digital Trimming.
  • Steering Dual-Rate (ST D/R) Adjustment.
  • End Point Adjustment (EPA).
  • Build in Failsafe.
  • Frequencies: 2.4GHz
  • Power Supply: 4
  • AA Alkaline (Not Included).

Body: Official Licensed by Ford Motor

  • F-250 Super Duty.
  • Scale Realistic Body Details.
  • Black Bed Liner Coating.
  • hard Molded Front & Rear bumpers with build in 3mm LED housing

Chassis:

  • Steel Frame Rails.
  • CMS (Chassis Mounted Servo) Chassis Design.
  • Stamped Steel Shock Hoops.
  • Steel Skid Plate.
  • Full Precision Ball Bearing Supported.
  • Adjustable Turnbuckles.
  • High Torque Servo Saver Horn.
  • Easy Access Battery Tray.
  • Battery Tray Size 146 x 50 x 25mm.

Suspension:

  • Custom Lifted Suspension Design.
  • 110mm Big Bore Oil Filled Adjustable Coil Over Shocks.
  • 12mm over size shock body with 3mm Hardened Steel Polished Shaft.
  • Harden Steel Steering Drag Link.
  • CNC Machined 6mm Aluminum Linkage.
  • Front / Rear Sway Bar.

Drivetrain:

  • Full Metal Transmission Gears.
  • 4 Wheels Drive.
  • Center Shaft Drivetrain for More Power Transferred to the Wheels.
  • Hight Efficient Transmission System.
  • Wide Range Easy Changeable Gear Box Design.
  • Sealed Transmission Case.
  • Sealed Axle Housing.
  • Metal Planetary Gear Type Differential.

Gear Ratio:

  • Hi / Speed Ratio 1.56:1
  • Hi / Torque Ratio 2.8:1
  • Spur / Pinion Gear 32p85/32p12T
  • Ring & Pinion Gear30/15T 2:1

Wheel: Official Licensed by KG1 Forged

  • KF004 Vile Wheel.
  • 66.50mm x 37.5mm.

Tires: Official Licensed Fury Tires

  • Low Profile Country Hunter tires.
  • 65 x 100.50 x 38.50 mm.

Specifications:

  • Length: 25.6 inches (650mm)
  • Width: 10.04 inches (255mm)
  • Wheelbase: 16.02 inches (407mm)
  • Ground Clearance: 3.54inch (90mm)
  • Weight: 5.51 lb. 2.5 kg
  • Recommended Battery: 2S 5000mAh LiPo Battery with dean connector

  • Product form

    $469.99

      SKU: CEG8993
      Barcode: 4717873089938

      Brand: CEN Racing | RC Parts & Accessories

      Product Tags

      Description

      CEG8993, Ford F250 1/10 4WD KG1 Edition Lifted Truck, Burnt Copper - RTR

       

      RGB LED Light: Standard Under Fender Multicolor RGB LED.

      ESC: 40A WP-1040-Brushed (By HobbyWing)

      • Water-Proof and Dust-Proof for All Weather.
      • Built-In Capacitor Module.
      • Automatic Throttle Range Calibration.
      • Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
      • Over-Heat Protection and Throttle Signal Loss Protection.

      Motor: RS-540 High Torque Brushed Motor.

      Servo: 12Kg Metal Gear Servo (By Savox)

      • 4.8V - 0.26 sec/60 10.0 kg-cm.
      • 6.0V - 0.23 sec/60 12.0 kg-cm.
      • 25T Horn Gear Spline.

      Radio System: Pistol-Grip Mod-3S 3 Channel Transmitter and Receiver

      • Digital Trimming.
      • Steering Dual-Rate (ST D/R) Adjustment.
      • End Point Adjustment (EPA).
      • Build in Failsafe.
      • Frequencies: 2.4GHz
      • Power Supply: 4
      • AA Alkaline (Not Included).

      Body: Official Licensed by Ford Motor

      • F-250 Super Duty.
      • Scale Realistic Body Details.
      • Black Bed Liner Coating.
      • hard Molded Front & Rear bumpers with build in 3mm LED housing

      Chassis:

      • Steel Frame Rails.
      • CMS (Chassis Mounted Servo) Chassis Design.
      • Stamped Steel Shock Hoops.
      • Steel Skid Plate.
      • Full Precision Ball Bearing Supported.
      • Adjustable Turnbuckles.
      • High Torque Servo Saver Horn.
      • Easy Access Battery Tray.
      • Battery Tray Size 146 x 50 x 25mm.

      Suspension:

      • Custom Lifted Suspension Design.
      • 110mm Big Bore Oil Filled Adjustable Coil Over Shocks.
      • 12mm over size shock body with 3mm Hardened Steel Polished Shaft.
      • Harden Steel Steering Drag Link.
      • CNC Machined 6mm Aluminum Linkage.
      • Front / Rear Sway Bar.

      Drivetrain:

      • Full Metal Transmission Gears.
      • 4 Wheels Drive.
      • Center Shaft Drivetrain for More Power Transferred to the Wheels.
      • Hight Efficient Transmission System.
      • Wide Range Easy Changeable Gear Box Design.
      • Sealed Transmission Case.
      • Sealed Axle Housing.
      • Metal Planetary Gear Type Differential.

      Gear Ratio:

      • Hi / Speed Ratio 1.56:1
      • Hi / Torque Ratio 2.8:1
      • Spur / Pinion Gear 32p85/32p12T
      • Ring & Pinion Gear30/15T 2:1

      Wheel: Official Licensed by KG1 Forged

      • KF004 Vile Wheel.
      • 66.50mm x 37.5mm.

      Tires: Official Licensed Fury Tires

      • Low Profile Country Hunter tires.
      • 65 x 100.50 x 38.50 mm.

      Specifications:

    • Length: 25.6 inches (650mm)
    • Width: 10.04 inches (255mm)
    • Wheelbase: 16.02 inches (407mm)
    • Ground Clearance: 3.54inch (90mm)
    • Weight: 5.51 lb. 2.5 kg
    • Recommended Battery: 2S 5000mAh LiPo Battery with dean connector

    • Recently viewed products

      © 2024 Caloosa Trains And Hobbies,

        Login

        Forgot your password?

        Don't have an account yet?
        Create account