LOS00007, Losi Micro-B 2.0 1/24 RTR 2WD Buggy w/2.4GHz Radio, Battery & Charger
TLR Champion Race Inspired
The Losi Micro-B 2.0 1/24 RTR 2WD Buggy captures the excitement of RC racing in a compact, highly maneuverable package that’s small enough to run almost anywhere. Inspired by TLR's World Champion buggy, this micro-sized racer delivers big performance and agility. Whether you're racing in your living room or on a homemade track, the Micro-B's precision engineering, compact size, and TLR-inspired design make it an ideal choice for both casual RC enthusiasts and those looking to share their passion for racing with friends and family. Its RTR (Ready-To-Run) design means no additional accessories are needed, making it an easy and budget-friendly entry point into the RC world.
Performance Oriented Components
The Micro-B features a black-anodized aluminum chassis, setting a higher standard for micro RC vehicles with its rigid, durable construction. This chassis is designed with front caster kick and side bends to offer superior strength, ensuring it can withstand the bumps and jumps of intense racing. Paired with fully adjustable oil-filled shocks, the buggy delivers excellent handling and a smooth ride over various surfaces. The Pro-Line Racing body, wheels, and tires give it an authentic look and performance edge, reminiscent of full-scale race-winning designs, adding to the realism and enhancing your racing experience.
Electronics & Drivetrain
At the heart of the Losi Micro-B is its powerful Spektrum 350mAh LiPo battery and fully proportional electronics, allowing for precise control and speeds of 13+ mph — insane for a vehicle of this size! The Spektrum SLT2 2.4GHz radio ensures interference-free racing, while a throttle limiter provides “rookie mode” settings for safe learning at 50% or 75% speed. With over 20 minutes of run time and a convenient USB-C charger, this buggy offers reliable, high-speed fun that’s easy to recharge and race again in no time.
Features:
Modeled after a championship-winning buggy for race-ready performance
Pre-assembled and ready out of the box with all necessary components
Pro-Line Racing body, wheels & tires
Delivers incredible speed for a micro buggy
Adjustable race inspired oil-filled shocks
Extremely rigid and durable black anodized aluminum chassis
Spektrum powerful, reliable and responsive electronics
Small enough to race almost anywhere, from indoor to outdoor tracks
Offers 20+ minutes of run time and fast recharge with the USB-C charger
Customizable speed settings for beginner, intermediate, and advanced drivers
This product was added to our catalog on October 2, 2021
(Pre-Order) ASC70002, Team Associated RC10T Classic Kit
Introducing the RC10T Classic: A True Retro Revival
Step back in time to the golden era of RC racing with the RC10T Classic, a faithful recreation of the iconic RC10T from 1991. As a tribute to the glory days of off-road racing, this classic model embodies the essence of its predecessor, capturing the spirit and performance that made the original RC10T a legend on the track.
At the heart of the RC10T Classic lies the legendary Stealth transmission, the secret weapon that dominated the racing scene from 1989 to 1991. Renowned for its unparalleled efficiency and seamless power delivery, the Stealth transmission ensures lightning-fast acceleration and precise control, just like its predecessor did decades ago.
With its black-anodized aluminum tub chassis featuring a laser etched RC10T logo, the RC10T Classic pays homage to the original design that captured the hearts of RC enthusiasts worldwide. This timeless chassis provides the perfect balance of strength and agility, allowing drivers to tackle any terrain with confidence and precision.
Team Associated is thrilled to celebrate our 60th anniversary alongside the release of the RC10T Classic. It's more than just a model; it's a journey back in time to a period when RC racing was at its peak. Get ready to unleash the power of the Stealth transmission and write your own chapter in RC racing history with the RC10T Classic by Team Associated.
Team Associated's RC10T is the fastest, most reliable race truck because it was developed by the same winning engineering that produced nine World Champion.
Like all Associated RC race cars, the RC10T was toughened, refined, and proven in competition before the design was finalized. Even though our drivers had no truck racing experience, they took on all corners from Coast to Coast to make sure your RC10T is a winner, too. RC10T's took first and second in the Florida Winter Championships against a field of 450 entries.
Unlike other truck and RC10 conversion kits, no compromises were made with the RC10T. Working closely with the latest ROAR specifications for Offroad Truck racing, our R&D team designed a purpose-built machine with the response and handling serious racers demand.
Thus, the front and rear track of the RC10T were widened for maximum cornering speeds. The wheelbase was lengthened, and a special narrow bulkhead improves high-speed stability. To cope with the larger tires and longer suspension travel, shock tower design was critical as well.
Even the body of the RC10T is part of the winning combination. Vacuum-formed low and lightweight, it protects the shock towers as well.
The result is predictably awesome. With its high efficiency Stealth transmission, lightweight chassis and suspension, full race shocks and grippy rubber, the RC10T delivers explosive performance, even with stock class motors and batteries.
This product was added to our catalog on May 19, 2024
01004432-3, Futaba 10PX USLE 10-Channel 2.4GHz T-FHSS Radio System w/Case (Limited Edition)
The Futaba 10PX USLE, featuring a limited edition serial number, 3D carbon handle, and a magnesium steering housing, stands as the ultimate remote control transmitter for precision and performance. At its core, you'll find an impressive full-color TFT Liquid Crystal Touch screen LCD, generously sized at 4.3 inches, making it ideal for both indoor and outdoor use. Thanks to its transflective technology, it guarantees crystal-clear visibility in any lighting condition.
In addition to its remarkable display, the Futaba 10PX offers exceptional functionality with its 10 channels, driven by the lightning-fast F-4G system, delivering unbeatable telemetry responsiveness. If you require even greater versatility, the S.BUS2 system enables the simultaneous operation of up to 10 channels. Moreover, you have the option to personalize your experience using the T-FHSS MINIZ system, providing you with the flexibility to fine-tune your setup through the Kyosho Mini-Z Evo dedicated receiver.
Besides these state-of-the-art attributes, the 10PX boasts a plethora of features, including brake and steering mixing for larger vehicles, 4WS mixing for crawlers, and gyro sensitivity adjustments. Its compatibility with LiPo batteries, ability to receive firmware updates via a microSD card, and customizable button configuration make it an empowering choice for taking command like never before. Elevate your RC experience with the 10PX – it's the ultimate tool for dedicated enthusiasts.
Features:
Full color TFT Liquid Crystal Touch
USLE Trim Level with magnesium steering bracket and Limited Edition serial number
Includes high-quality carrying case
F-4G system & telemetry
Up to 10 channels can be operated by using the S.BUS2 system
By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42 (Sold Separately)
Software can be updated via microSD card (Sold Separately)
40 model memory with allowance for 15 character names
Brake mixing for large cars
Steering mixing is independent allowing for precise left and right steering servo settings
4WS mixing for crawlers
Dual ESCs mixing allows for two ESCs to be controlled independently
The sensitivity of Futaba car gyros can be adjusted from the T10PX
Futaba S.BUS servo allows setting of the parameters of select Futaba S.BUS servo
CPS LED light mixing
Tank mixing
Compatible with 6.6V LiFe and 7.4V LiPo Batteries
Specifications:
Frequency: 2.4GHz @ 100mW
Protocols: T-FHSS-SR/T-FHSS/S-FHSS
Voltages: 6.6V LiFe/7.4V LiPo
Current Drain: 350mA or Less
Antenna Type: 1/2 Dipole
Display: 4.3in TFT Liquid Crystal Touch
Includes:
(1) 10PX USLE Transmitter with limited edition number plate
(1) Limited edition carrying case with badge
(1) 3D Carbon fiber handle
Magnesium steering housing
(3) Limited edition gray grips
(1) Dry Battery Holder
32° and 5° Wheel offset adapters
(1) Large and small diameter steering wheel
Multi tension spring kit
(2) Trigger guards
(1) Rubber Grip
(1) Hex wrench
(1) Short manual
This product was added to our catalog on November 25, 2023
01102213-1, Futaba, SBS-01T Temperature Sensor
This is an optional Futaba SBS-01T Temperature Sensor. This sensor simply plugs into the S.Bus2 slot on telemetry-enabled receivers, which transmit data directly to FASSTest systems.
Monitor temperatures on engines, motors, mufflers and batteries - nearly anything that radiates heat!
Specifications:Range: -4 to 392° F (-20 to 200°C)Weight: 0.16 oz (4.6g)Size: 535mm
This product was added to our catalog on March 15, 2023
01102289-1, Futaba, SBS-01V External Battery Voltage Sensor
This is the Futaba SBS-01RO Optical RPM Sensor. Getting the performance information you want has never been easier, lighter or more convenient! This sensor plugs into the S.Bus2 slot on telemetry-enabled receivers, and transmits the data directly to FASSTest systems.
Specifications:
Displays: revolutions per minute
Range: 360-300,000
Weight: 0.17 oz (4.9 g)
This product was added to our catalog on February 25, 2023
020149-2, R1 25.5T V21-S Motor W/Hand Picked Stator ROAR
NOTE: This motor uses v16 can screws, our option v21 set will not work with these motors.
APPLICATION
OFFROAD BUGGY, TRUCK, 4WD & SHORT COURSE TRUCK
TC BLINKY (OUTDOOR & INDOOR)
1/12 1S BLINKY
OVAL 1S BLINKY
OVAL 1S OPEN (BOOSTED)
TECHNOLOGY
PROPRIETARY R1 STATOR LAMINATE MATERIAL
R1 V21 STATORS ARE DESIGNED USING COMPUTER SIMULATION TECHNOLOGY
EPOXY BONDED END WIND
ULTRA LOW RESISTANCE COLLECTOR RING
IMPROVED RESISTANCE COMPARED TO V16
IMPROVED PUNCH & TOP END
INCLUDES ALUMINUM TIMING RING
This product was added to our catalog on August 4, 2023
R1 Wurks 21.5 V21HD Motor
This new motor was developed in house in collaboration with our team drivers. We have transformed our race winning V21-S motor into a heavy duty version. This motor has improved can and stator durability that makes it stronger than the current V21-S offering. This motor is a 2-piece design. The front end of the motor is thicker being a single piece and with removable endbell.
This product was added to our catalog on August 4, 2023
1/10 Scale On Road Car Body
Length - 17" or 430mm
Width - 8" or 200mm
Height - 4.5" or 115mm
Wheelbase - 10" or 255mm
Color - Clear
Window Stickers Included - No
Other Stickers Included - Yes
Precut - Yes
101076-4, Traxxas Ford Raptor R: 4X4 VXL 1/10 Scale 4X4 Brushless Replica Truck
The Traxxas Raptor R is the newest member of the innovative Traxxas Pro Scale lineup. Superb scale detail and proportion combine with 4X4 traction and extreme Velineon brushless horsepower to faithfully capture the Raptor R driving experience. Only Traxxas Pro Scale delivers both the exacting realism and unbeatable speed and durability performance drivers demand.
Officially Licensed Ford F-150 Raptor R Pro Scale Clipless Body and Graphics
Molded scale details: bumpers, grille, tailgate, side mirrors, and hood vent
LED lighting in front and rear bumpers
Body reinforcements to prevent pull-through damage
Clipless Body Mounting
Holds tight for intense action
Quick and easy removal
Smooth appearance with no body posts or clips
Extreme Heavy-Duty Upgrade Kit Installed
Made from our toughest cold-weather resistant composite
Strengthened C-hubs, axle carriers, steering blocks, and shock towers
Extreme heavy-duty driveshafts
Oversize diameter
6 mm axles
Steel wheel hexes
VXL-3s Waterproof Electronic Speed Control
Cooling fan with large heat sink
Three Programmable Drive Profiles
Sport Mode - Forward / Brake / Reverse
Race Mode - Forward / Brake
Training Mode - 50% Forward / Brake / 50% Reverse (patented)
Traxxas EZ-Set® one-button setup
Built-in two-stage low-voltage detection for LiPo batteries
NiMH battery packs: 4-9 cells (4.8 to 10.8 volts)
LiPo battery packs: 2-3 cells (7.4 to 11.1 volts)
Up to 60+ mph with 3s LiPo battery
Velineon 3500 kV Brushless Motor
Ultra high-temperature sintered Neodymium magnets
Optimized for power and efficiency in 1/10th scale vehicles
Efficient, high-speed ball bearings
Precision-balanced rotor
3500 kV
Brilliant blue-anodized finish
Traxxas Stability Management (TSM)
Improves straight line acceleration and braking on low-traction surfaces
Maintains steering composure to allow throttle-on powerslides
Never dulls throttle or slows the truck
Adjusts from off to 100% assistance from the transmitter
TQi 2.4 GHz High Output Radio System
TQi 2-channel transmitter
Automatically stores and loads settings for up to 30 Traxxas Link-enabled models
Programmable multi-function knob
Adjustable steering and throttle percentage (dual rates)
Adjustable steering and throttle sensitivity (exponential)
Adjustable steering and throttle end points
5-channel micro receiver (6533) with fail-safe security
Patented waterproof receiver box with easy-access plug
Chassis
Extended modular composite tub design
Secure battery hold-down latch
Side nerf bars for impact resistance
Drivetrain
Full-time shaft-driven 4-wheel drive
Oil-filled steel gear front and rear differentials
Large 32-pitch steel spur gear
Anodized-aluminum center driveshaft
Steering
Chassis-mounted 2075 servo
Dual bellcrank design with integrated servo saver
Suspension
Heavy-duty suspension arms
Adjustable 4 mm steel toe and camber links
Oil-filled Ultra Shocks
White powder-coated progressive springs
Wheels and Tires
Licensed Ford replica option wheels
2″ outer diameter, 3″ inner diameter
Licensed BFGoodrich® All-Terrain T/A KO2 tires
Larger114 mm diameter
Sealed Ball Bearings
Hex hardware with Rust-Resistant Black Oxide Coating
This product was added to our catalog or updated on July 27, 2023
10590, Traxxas 4-Tec 2.0 Underbody LED Light Kit
Give your 4-Tec® 2.0 extra style points with this underbody LED light kit. Perfect for track competitions or parking lot hooning, the underbody LED light kit casts a colorful glow underneath the car. The light kit is compatible with 4-Tec Drift and most 200 mm bodies fitting the 4-Tec 2.0 chassis. The LED light strips are sealed inside a tough housing that mounts securely to the sides of the chassis with the provided hardware. The included 3-volt power supply connects directly to the battery using the included power tap for smooth, consistent light output from beginning to end. Take your driving experience to the next level with the 4-Tec underbody LED light kit.
This product was added to our catalog on December 7, 2024
107154-1, Traxxas Mini Maxx BL-2s
Overbuilt and over-the-top, the all-new Mini Maxx captures the engineering, unmatched power, and extreme durability that defines Traxxas Maxx® performance. Mini Maxx is the perfect, take-anywhere size, delivering 30+ mph brushless speed and legendary Maxx toughness that slides easily into a backpack.
30+ mph Top Speed
BL-2s™ Waterproof Electronic Speed Control
Heat sink accepts accessory cooling fan (3340)
Three programmable drive profiles
Sport Mode - forward / brake / reverse
Race Mode - forward / brake
Training Mode™ - 50% forward / brake / 50% reverse
Traxxas EZ-Set® one-button setup
Built-in two-stage low-voltage detection
BL-2s™ Brushless Motor
Integrated cooling fan
Low-maintenance design
Efficient ball bearings
3300 Kv
Battery and Charger Included
High-capacity 2-cell LiPo battery
7.4 volts
3500 mAh for extended run time
2-amp USB-C charger
iD® technology for faster, safer charging
TQ™ 2.4 GHz Transmitter
Full-size 2-channel transmitter
All-day comfort with precise long-range control
Clipless Body Mount System
Quick and easy installation and removal
Nerf bar channels for side body support
Reinforced for extra protection against tearing
1/10 Scale 4X4 Drivetrain
Full-time shaft-driven 4-wheel drive
1/10 scale extreme-duty telescoping driveshafts
Direct drive (no transmission)
Fixed gear mesh system
Large 32-pitch gears
Sealed planetary steel-gear differentials
Fixed gear mesh system
Modular Composite Chassis
Modular chassis with interlocking front and rear bulkheads
Absorbs and distributes impact energy
Easy to service and access components
Driveline is sealed in the chassis to keep out dirt
Easy Battery Access
Battery is protected deep in the chassis
Battery hold-down pivots for easy access
More secure than conventional retention systems
Steering
1/10 scale 2056 waterproof high-torque servo
Heavy-duty double-shear bellcranks
Cam-style servo saver
Suspension
Heavy duty, double-shear suspension arms
Dual wishbone design
Extra tough outer suspension components
Oil-Filled Ultra Shocks™
Full size 1/10 scale shocks
Large oil capacity
Easy to tune
Bumpers and Skid Plates
Tough energy absorbing bumpers
High-angle front skid plate
Rugged interlocking skid plates
Smooth undertray eliminates snags
Integrated nerf bars for side impact resistance
Wheels and Tires
2.4″ black multi-spoke wheels
4″ Sledgehammer® tires with foam inserts
Wide tread block design
Multiple layers of biting edges
Hex Hardware with Rust-Resistant Black Oxide Coating
Sealed Ball Bearings
This product was added to our catalog on October 13, 2024
1UP190205, 1UP Racing Premium R/C Solder (100g)
This is the 1UP Racing Premium R/C Solder. Designed to be used with high strand count wire found in RC Cars and Drones this premium solder offers a reliable low resistance connection. This easy to work with solder has been proven to perform in extreme conditions and is an excellent addition to any hobbyist's toolbox.
Specifications:
Solder Type: Lead Based
Weight: 100g
Includes:
(1) 100g Tube of 1UP Racing Premium R/C Solder
This product was added to our catalog on July 22, 2024
1UP190408, 1UP Racing 4mm to 5mm LowPro Bullet Plug Adapters (10)
1UP Racing 4mm to 5mm LowPro Bullet Plug Adapters make life easy when switching between batteries with different size bullet plug inputs. Install 1up Racing LowPro 4mm Bullet Plugs on your car and simply use these with any batteries that require 5mm plugs.
This product was added to our catalog on May 16, 2021
1UP190436, 1UP Racing Heatsink Bullet Plug Grips w/5mm Bullets (Black/Red)
The 1UP Racing 5mm Bullets w/Heatsink Bullet Plug Grips are perfect for adding a little extra bling and improved grip to your battery leads. Easy setup and secure locking make for a perfect alternative to standard bullet connectors.
Includes:
(2) 5mm bullets
(2) Plug grips
(2) 3mm set screws
This product was added to our catalog on December 16, 2021
1UP190734, 1UP Racing UltraLite 30mm 4WD Buggy Fan Shroud (Upper Mount)
This is the 1UP Racing UltraLite 30mm 4WD Buggy Fan Shroud. Designed to maximize the effectiveness of your motors cooling fan this made in the USA shroud gives you a high quality and light weight cooling solution. This 3D printed shroud is a perfect match for the 1UP Racing UltraLite 30mm Aluminum Cooling Fan but is also compatible with most 4-hole 30mm fans. Specifically designed for 4WD Buggy applications this shroud uses a two-piece design that mounts to the top of the center bulkhead and has been tested to fit the AE B74.2, TLR 22X-4 and XRAY XB4 '23. This replaces the standard fan mount with a fully ducted setup to direct all air towards the motor for the best cooling possible. With additional cooling on your side enjoy the benefits of being able to push your electronics harder than your competition, with this UltraLite 30mm Fan Shroud from 1UP Racing.
Includes:
(1) UltraLite 30mm 4WD Buggy Fan Shroud (Upper Mount)
This product was added to our catalog on May 9, 2023
1UP Racing WellRC 2 Speed Quick Clips. These speed clips are a great option to quickly service your 2 speed clutch in your 1/10 or 1/8 scale nitro buggy. Package includes five quick clips.NOTE: This is compatible with 6-8mm shafts.
1UP300014, 1UP Racing RC10B7/RC10B7D Twin 1UP Outline Logo Reusable Chassis Protector Sheet (Carbon)
The 1UP Racing AE RC10B7/RC10B7D Chassis Protector Sheet is an excellent way to protect your chassis from wear while adding your own custom flare. This sheet was intended to be used on the AE RC10B7/RC10B7D buggy and comes pre-cut and ready to be applied. Constructed with durable thick vinyl material this chassis sheet comes with an extremely tacky adhesive allowing you to peel and re-apply this sheet up to 7-8 times! Package includes one chassis protector.
This product was added to our catalog on November 1, 2024
1UP80301, 1UP Racing 3x6mm Precision Aluminum Shims (Black) (12) (0.25mm)
The 1UP Racing 3x6mm Precision Aluminum Shims have been designed and produced to have extremely tight tolerances. CNC machined, these shims feature a 3mm bore and allow for accurate adjustments every time. These shims are available in many thickness options to best suite your needs. 1UP Racing has released these shims in many different color options to best match your build. Package includes twelve shims.
Features:
CNC machined for extremely tight tolerances
Available min many different thickness options
Multiple color options available
Specifications:
Outer Diameter: 6.0mm
Inner Diameter: 3.0mm
Thickness: 0.25mm
This product was added to our catalog on February 2, 2024
1UP80303, 1UP Racing 3x6mm Precision Aluminum Shims (Black) (12) (1mm)
The 1UP Racing 3x6mm Precision Aluminum Shims have been designed and produced to have extremely tight tolerances. CNC machined, these shims feature a 3mm bore and allow for accurate adjustments every time. These shims are available in many thickness options to best suite your needs. 1UP Racing has released these shims in many different color options to best match your build. Package includes twelve shims.
Features:
CNC machined for extremely tight tolerances
Available min many different thickness options
Multiple color options available
Specifications:
Outer Diameter: 6.0mm
Inner Diameter: 3.0mm
Thickness: 1mm
.
This product was added to our catalog on February 2, 2024
1UP80304, 1UP Racing 3x6mm Precision Aluminum Shims (Black) (12) (2mm)
The 1UP Racing 3x6mm Precision Aluminum Shims have been designed and produced to have extremely tight tolerances. CNC machined, these shims feature a 3mm bore and allow for accurate adjustments every time. These shims are available in many thickness options to best suite your needs. 1UP Racing has released these shims in many different color options to best match your build. Package includes twelve shims.
Features:
CNC machined for extremely tight tolerances
Available min many different thickness options
Multiple color options available
Specifications:
Outer Diameter: 6.0mm
Inner Diameter: 3.0mm
Thickness: 2mm
This product was added to our catalog on February 2, 2024
1UP80305, 1UP Racing 3x6mm Precision Aluminum Shims (Black) (12) (3mm)
The 1UP Racing 3x6mm Precision Aluminum Shims have been designed and produced to have extremely tight tolerances. CNC machined, these shims feature a 3mm bore and allow for accurate adjustments every time. These shims are available in many thickness options to best suite your needs. 1UP Racing has released these shims in many different color options to best match your build. Package includes twelve shims.
Features:
CNC machined for extremely tight tolerances
Available min many different thickness options
Multiple color options available
Specifications:
Outer Diameter: 6.0mm
Inner Diameter: 3.0mm
Thickness: 3mm.
This product was added to our catalog on February 2, 2024
1UP80306, 1UP Racing 3x6mm Precision Aluminum Shims (Black) (12) (0.75mm)
The 1UP Racing 3x6mm Precision Aluminum Shims have been designed and produced to have extremely tight tolerances. CNC machined, these shims feature a 3mm bore and allow for accurate adjustments every time. These shims are available in many thickness options to best suite your needs. 1UP Racing has released these shims in many different color options to best match your build. Package includes twelve shims.
Features:
CNC machined for extremely tight tolerances
Available min many different thickness options
Multiple color options available
Specifications:
Outer Diameter: 6.0mm
Inner Diameter: 3.0mm
Thickness: 0.75mm
This product was added to our catalog on February 2, 2024
1UP80307, 1UP Racing 3x6mm Precision Aluminum Shims (Black) (12) (1.5mm)
The 1UP Racing 3x6mm Precision Aluminum Shims have been designed and produced to have extremely tight tolerances. CNC machined, these shims feature a 3mm bore and allow for accurate adjustments every time. These shims are available in many thickness options to best suite your needs. 1UP Racing has released these shims in many different color options to best match your build. Package includes twelve shims.
Features:
CNC machined for extremely tight tolerances
Available min many different thickness options
Multiple color options available
Specifications:
Outer Diameter: 6.0mm
Inner Diameter: 3.0mm
Thickness: 1.5mm
This product was added to our catalog on February 2, 2024
1UP80308, 1UP Racing 3x6mm Precision Aluminum Shims (Black) (12) (2.5mm)
The 1UP Racing 3x6mm Precision Aluminum Shims have been designed and produced to have extremely tight tolerances. CNC machined, these shims feature a 3mm bore and allow for accurate adjustments every time. These shims are available in many thickness options to best suite your needs. 1UP Racing has released these shims in many different color options to best match your build. Package includes twelve shims.
Features:
CNC machined for extremely tight tolerances
Available min many different thickness options
Multiple color options available
Specifications:
Outer Diameter: 6.0mm
Inner Diameter: 3.0mm
Thickness: 2.5mm
This product was added to our catalog on February 2, 2024
1UP80401, 1UP Racing 3x8mm Precision Aluminum Shims (Black) (10) (0.5mm)
The 1UP Racing 3x8x0.5mm Precision Aluminum Shims are CNC-Machined to strict tolerances for accurate shim adjustments. These shims are then anodized glossy black for a clean finish. Use these with 3mm screws or ball studs, or with any 3mm pins to ensure accurate settings every time! Package includes ten optional shims.
This product was added to our catalog on February 2, 2024
1UP80402, 1UP Racing 3x8mm Precision Aluminum Shims (Black) (10) (0.75mm)
The 1UP Racing 3x8x0.75mm Precision Aluminum Shims are CNC-Machined to strict tolerances for accurate shim adjustments. These shims are then anodized glossy black for a clean finish. Use these with 3mm screws or ball studs, or with any 3mm pins to ensure accurate settings every time! Package includes ten optional shims.
This product was added to our catalog on February 2, 2024
1UP80403, 1UP Racing 3x8mm Precision Aluminum Shims (Black) (10) (1mm)
The 1UP Racing 3x8x1mm Precision Aluminum Shims are CNC-Machined to strict tolerances for accurate shim adjustments. These shims are then anodized glossy black for a clean finish. Use these with 3mm screws or ball studs, or with any 3mm pins to ensure accurate settings every time! Package includes ten optional shims.
This product was added to our catalog on February 2, 2024
1UP80404, 1UP Racing 3x8mm Precision Aluminum Shims (Black) (10) (2mm)
The 1UP Racing 3x8x2mm Precision Aluminum Shims are CNC-Machined to strict tolerances for accurate shim adjustments. These shims are then anodized glossy black for a clean finish. Use these with 3mm screws or ball studs, or with any 3mm pins to ensure accurate settings every time! Package includes ten optional shims.
This product was added to our catalog on February 2, 2024
1UP80405, 1UP Racing 3x8mm Precision Aluminum Shims (Black) (10) (3mm)
The 1UP Racing 3x8x3mm Precision Aluminum Shims are CNC-Machined to strict tolerances for accurate shim adjustments. These shims are then anodized glossy black for a clean finish. Use these with 3mm screws or ball studs, or with any 3mm pins to ensure accurate settings every time! Package includes ten optional shims.
This product was added to our catalog on February 2, 2024
36054-8, Traxxas Stampede 1/10 RTR Monster Truck w/XL-5 ESC, TQ 2.4GHz Radio, Battery & USB-C Charger
The Traxxas Stampede 1/10 RTR Monster Truck has been an icon in the monster truck category since its debut back in 1994. Designed to be an off-road bashing machine, the Stampede gives drivers the ground clearance and stability to tackle all types of challenging terrain. Powered by a potent Titan 12-turn motor and equipped with the XL-5 waterproof ESC, the Stampede is a go to choice for those looking to get into the action with speed, quality, and pure off-road fun.
Traxxas wants to make sure that you get out and enjoy the benefits of this truck as soon as possible. This is why Traxxas includes a 3000mAh Nickle-Metal-Hydride (NiMH) battery and a convenient USB-C charger in the box. The battery pack is able to deliver ample run time with the charger being an easy way to get things topped off to get back out and continue bashing. This Stampede also includes the Traxxas TQ 2.4GHz Radio System to give drivers an excellent range to drive their monster truck.
The Stampede includes a pre-painted ProGraphix body shell that gives users that monster truck feel. The decals on the body are pre-applied to depict headlights, grille, inner roll cage, and more! Get out and enjoy the outdoors with the Traxxas Stampede, the legendary off-road Traxxas Monster Truck!
CHARGER NOTE: Power adapter and cable sold separately. For maximum charging rate, please use the Traxxas Power Adapter and Traxxas Charging Cable (TRA2912 & TRA2916 - both sold separately).
Features:
Tough Traxxas 2WD 272 Magnum Transmission
High Torque Traxxas 2056 Steering Servo
4-Inches of Ground Clearance to Tackle Terrain
Includes Pre-Painted Bodyshell
Easy Access Battery Compartment
Includes Battery and Charger for Easy of Use
Delivers a Top Speed of Over 30MPH (with 7-cell NiMH battery and included 21-tooth pinion gear)
Three Driving Profiles
Specifications:
Scale: 1/10
Length: 16.9in (428mm)
Width: 12.75in (324mm)
Height: 9.84in (250mm)
Wheelbase: 10.6in (270mm)
Weight: 65.3oz (1.85kg)
Power Source: Electric
Input Voltage:
6-cells (7.2V) NiMH
2S (7.4V) LiPo
Drive: RWD
Gear Pitch: 48P
Gear Ratio: 2.72 (final drive: 12.34)
Assembly Level: Ready-To-Run
Includes
(1) Traxxas RTR Stampede
(1) 3000mAh Battery with Traxxas ID Connector
(1) USB-C Battery Charger
(1) User Manual
Needed To Complete
(4) AA Batteries for Transmitter
This product was added to our catalog on September 27, 2023
