CEG8992, CEN Ford F250 SD KG1 Lift Edition 1/10 RTR Custom Truck (Daytona Blue) w/2.4GHz Radio
The CEN Ford F250 SD KG1 Lift Edition 1/10 RTR Custom Truck brings the same incredible custom looks as offered with it's F450 big brother but with a fresh updated look. Featuring a true to scale F250 quad cab body, detailed side view mirrors, custom front and rear bumpers and a massive suspension lift it is hard to deny how awesome this truck looks! Adding to the custom truck theme is an RGB LED light positioned under the fenders. This light is selectable from the transmitter and gives you a multitude of color options showing off the impressive suspension. Supporting the F250 are two stout straight axles each located with four aluminum main links and a unique Watts link style pivoting axle mount. The Watts link takes the place of a typical panhard bar and keeps the axle centered throughout the suspension travel thus keeping any unwanted tire rubbing from happening. Finishing off the axles are a matching pair of front and rear sway bars keeping the truck level in heavy duty conditions.
Powering this beast is a high torque 540 brushed motor and Hobbywing SC-40A WP-1040 ESC giving you the power and control needed to take this truck to the extremes. CEN paid attention to the details with the drivetrain components as well, with hardened steel components, super scale features and a full selection of option parts designed to allow easy customization. Available in either a Burnt Copper body with black chrome wheels or a Daytona Blue body with chrome wheels gives you the ability to choose your own unique look. The CEN Ford F250 SD KG1 Lift Edition has the custom design you are looking for and is ready for the ultimate scale adventure!
Features:
SC-40A WP-1040-Brushed (Powered by HobbyWing):
Water-proof and dust-proof for all weather
Built-In Capacitor Module
Automatic throttle range calibration
Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
Over-Heat protection and throttle signal loss protection
Easily programmed with jumpers
Motor-RS-550 high Torque Motor (Power By Mabuchi Motor)
Servo -12Kg Servo O.E.M. by Savox:
4.8V 0.26 sec/60deg 10.0 kg-cm
6.0V 0.23 sec/60deg 12.0 kg-cm
25T Horn Gear Spline
Radio System:
Pistol-Grip Mod-3S 3 Channel Transmitter
Digital Trimming
Steering Dual-Rate (ST D/R) Adjustment
End Point Adjustment (EPA)
Built in Fail-safe
Chassis:
Steel Frame Rails
CMS (Chassis Mounted Servo) Chassis Design
Stamped Steel Shock Hoops
Steel Skid Plate
Full Precision Ball Bearing Support
Adjustable Turnbuckles
High Torque Servo Horn Safer
Suspension:
3 Links Suspension with Watts Link Design
Big Bore Oil Filled Adjustable Coil Over Shocks
Harden Steel Steering Drag Link
6mm Aluminum Linkage
Sway bar included
Drivetrain:
4 Wheel Drive
Center Shaft Drive Train for more power transferred to the wheels
Highly Efficient Transmission System
Wide Range Easy Changeable Gear Box Design
Sealed transmission eliminates dirt and dust
Sealed Axle housing
5mm Hardened Steel Axle shaft
Differential Center Locker Front/Rear Planetary Gear Type
Metal Transmission Gears
Planetary Gear type Differential
Specifications:
Length: 25.60inch (650mm)
Width: 10.04inch (255mm)
Wheelbase: 16.02inch (407mm)
Ground Clearance: 3.54inch (90mm)
Weight: 5.51 lb. (2.5kg)
Battery: 2s Lipo recommended
Includes:
(1) Ford F250 SD KG1 Lift Edition 1/10 Scale RTR Custom Truck
Needed To Complete:
2S Lipo w/T-Style Connector
Battery Charger
(4) "AA" Batteries for Transmitter
This product was added to our catalog on September 30, 2022
CEG8993, Ford F250 1/10 4WD KG1 Edition Lifted Truck, Burnt Copper - RTR
RGB LED Light: Standard Under Fender Multicolor RGB LED.
ESC: 40A WP-1040-Brushed (By HobbyWing)
Water-Proof and Dust-Proof for All Weather.
Built-In Capacitor Module.
Automatic Throttle Range Calibration.
Low Voltage Cut-Off Protection for Li-Po and NiMH Battery.
Over-Heat Protection and Throttle Signal Loss Protection.
Motor: RS-540 High Torque Brushed Motor.
Servo: 12Kg Metal Gear Servo (By Savox)
4.8V - 0.26 sec/60 10.0 kg-cm.
6.0V - 0.23 sec/60 12.0 kg-cm.
25T Horn Gear Spline.
Radio System: Pistol-Grip Mod-3S 3 Channel Transmitter and Receiver
Digital Trimming.
Steering Dual-Rate (ST D/R) Adjustment.
End Point Adjustment (EPA).
Build in Failsafe.
Frequencies: 2.4GHz
Power Supply: 4
AA Alkaline (Not Included).
Body: Official Licensed by Ford Motor
F-250 Super Duty.
Scale Realistic Body Details.
Black Bed Liner Coating.
hard Molded Front & Rear bumpers with build in 3mm LED housing
Chassis:
Steel Frame Rails.
CMS (Chassis Mounted Servo) Chassis Design.
Stamped Steel Shock Hoops.
Steel Skid Plate.
Full Precision Ball Bearing Supported.
Adjustable Turnbuckles.
High Torque Servo Saver Horn.
Easy Access Battery Tray.
Battery Tray Size 146 x 50 x 25mm.
Suspension:
Custom Lifted Suspension Design.
110mm Big Bore Oil Filled Adjustable Coil Over Shocks.
12mm over size shock body with 3mm Hardened Steel Polished Shaft.
Harden Steel Steering Drag Link.
CNC Machined 6mm Aluminum Linkage.
Front / Rear Sway Bar.
Drivetrain:
Full Metal Transmission Gears.
4 Wheels Drive.
Center Shaft Drivetrain for More Power Transferred to the Wheels.
Hight Efficient Transmission System.
Wide Range Easy Changeable Gear Box Design.
Sealed Transmission Case.
Sealed Axle Housing.
Metal Planetary Gear Type Differential.
Gear Ratio:
Hi / Speed Ratio 1.56:1
Hi / Torque Ratio 2.8:1
Spur / Pinion Gear 32p85/32p12T
Ring & Pinion Gear30/15T 2:1
Wheel: Official Licensed by KG1 Forged
KF004 Vile Wheel.
66.50mm x 37.5mm.
Tires: Official Licensed Fury Tires
Low Profile Country Hunter tires.
65 x 100.50 x 38.50 mm.
Specifications:
Length: 25.6 inches (650mm)
Width: 10.04 inches (255mm)
Wheelbase: 16.02 inches (407mm)
Ground Clearance: 3.54inch (90mm)
Weight: 5.51 lb. 2.5 kg
Recommended Battery: 2S 5000mAh LiPo Battery with dean connector
This is a replacement set of two CEN F450 SD 78mm Shocks, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2021
This is a replacement set of two CEN F450 SD Matte Silver Shock Springs, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2021
This is a replacement set of two CEN F450 SD M3x43mm Shock Shafts, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2021
This is a replacement CEN F450 SD Sway Bar Mount, intended for use with the CEN Ford F450 SD scale truck. Package includes left and right side sway bar mount brackets.
This is a replacement CEN F450 SD 105mm Front Center Drive Shaft, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 16, 2021
CEN F250 Center Drive Shaft. This is a replacement center drive shaft intended for the CEN Ford F250 truck. Package includes one 160.45mm long center driveshaft.
This is a replacement set of two CEN F450 SD M3x117mm Threaded Silver Aluminum Links, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 16, 2021
This is a replacement CEN F450 SD Chassis Rail Set, including rail A & B, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
This product was added to our catalog on March 15, 2021
This is a replacement set of two CEN F450 SD Metal 4-Link Suspension Stays, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 15, 2021
This is a replacement CEN F450 SD Steady Bearing Holder, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 16, 2021
This is a replacement CEN F450 SD 4-Link Support and Chassis Support Bracket set, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 15, 2021
CEN F250 Servo Saver Set. This is a replacement servo saver set intended for the CEN Ford F250 truck. Package includes one servo saver top, one servo saver bottom with a 25T spline and one extended servo saver arm.
CEN Racing F450 American Force H01 Contra Hub Cover. These replacement hubcaps are intended for the Cen Racing F450. Package includes two black hubcaps and two decals.
This product was added to our catalog on September 28, 2021
CEN Racing F450 American Force H01 Contra Hubcap. These optional hubcaps are intended for the Cen Racing F450. Package includes two chrome hubcaps and two decals.
This product was added to our catalog on September 28, 2021
CEGCD0910, CEN Ford F-250 Complete Body Set (Clear) w/Headlight Bracket
CEN Ford F-250 Complete Clear Body Set with Headlight Bracket. This is an optional clear body set intended for the CEN Ford F-250. NOTE: Painted body shown in photos is for illustrative purposes only and is not included. The body you will receive is clear and unpainted.Includes:
(1) F-250 Clear Lexan Cab
(1) F-250 Clear Lexan Bed
(1) F-250 Clear Lexan Light Buckets
(3) Decal Sheets
Molded Plastic Scale Accessories with Mounting Hardware
This product was added to our catalog on January 10, 2023
CEN Racing F450 Front and Rear Light Buckets. These optional front and rear light buckets come clear and are ready for you to paint and cut. Package includes one clear light bucket set, one length of double sided tape and LED mounts.
This product was added to our catalog on September 28, 2021
This is a CEN F450 SD Body Holding Block Set, intended for use with the CEN Ford F450 SD scale truck. Package includes four hex and four round type holding blocks.
This product was added to our catalog on February 16, 2021
CEN Racing F450 Aluminum 4th Link Mount. This optional 4th link mount is intended to add strength to the CEN Racing F450. Package includes one mount and hardware.
This product was added to our catalog on September 28, 2021
CEN Racing F450 Aluminum Differential Cover. This optional differential cover is made from aluminum and anodized red to add style to the CEN Racing F450. Package includes one differential cover and hardware.
This product was added to our catalog on October 11, 2021
CEN Racing F450 69mm Aluminum Front Upper and Lower Suspension Links. Made from CNC machined aluminum and anodized red, these optional links are intended for the CEN Racing F450. Package includes three unassembled front links. NOTE: Does not includes the front 4th link. Please use CEGCKD0378 for the correct 4th link.
This product was added to our catalog on October 14, 2021
CEN Racing F450 57mm Aluminum Panhard Bar & Steering Tie Rod. Made from CNC machined aluminum and anodized black, these optional links are intended for the CEN Racing F450. Package includes one steering link, one front panhard link, one rear panhard link and hardware.
COMPATIBILITY
CEN Ford F450
The KAOS CEN F450 Rear Bumper Crossmember is a replacement for the CEN F450 SD scale truck equipped with the optional Aluminum Trailer Tow Hitch (CEGCKD0450). Package includes one bumper crossmember.
This product was added to our catalog on May 12, 2021
CEGCKD0801, Pro RGB Light Conversion Kit for F450 Chasiss w/Pro Module
Pro RGB Light Conversion Kit for F450 Chassis w/Pro Module
CKD0801 KAOS RGB Light Conversion kit for F450 SD (F450 Chassis only w/ control Module)
This is Standard RGB kit for F450 SD
Including all the mounting wares
Include RGB MODULE which controls multi color changes
KAOS F450 SD Custom Truck Lift Conversion Kit
CKD1000 KAOS F450 SD Custom Truck Lift Conversion kit. This is a full lift kit and includes everything you need to take your F450 SD to the next level. Whether you want to tackle new terrain, or just stand out above the rest, this lift kit is what you need.
Features:
Full lift kit for F450 SD only
Includes 110mm full aluminum shock sets
Watt design links for prefect geometry
Item First Received: 12/13/2022
This is a replacement pack of four CEN F450 SD 1.8mm Tension Bars, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 15, 2021
This is a replacement set of two CEN F450 SD Sway Bar Main Shafts, intended for use with the CEN Ford F450 SD scale truck.
COMPATIBILITY
CEN Ford B50
CEN Ford F450
This is an optional CEN F450 SD Tension Bar Set, intended for use with the CEN Ford F450 SD scale truck. This pack includes 1.3mm, 1.4mm, and 1.5mm, two each.
This product was added to our catalog on February 16, 2021
This is a replacement set of two CEN F450 SD Differential Cases, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 16, 2021
This is a replacement CEN F450 SD Outdrive Cup, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on February 15, 202
This is a replacement set of two CEN F450 SD Wheel Axles, intended for use with the Ford F450 SD 1/10 RTR Custom Dually Truck.
This product was added to our catalog on March 15, 2021
This is a replacement CEN F450 SD Main Gear Shaft, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2021
This is a replacement CEN F450 SD 2nd Gear Shaft, intended for use with the CEN Ford F450 SD scale truck.
COMPATIBILITY
CEN Fiat Abarth
CEN Ford B50
CEN Ford F450
CEN Suzuki Jimn
This is a replacement CEN F450 SD Front Axle Shaft, intended for use with the CEN Ford F450 SD scale truck. Package includes one front axle shaft.
This product was added to our catalog on February 16, 2021
This is a replacement CEN F450 SD Wheel Hex set, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2021
CEGCQ0219, CEN F450 Center Transmission Gear Box
This is a replacement CEN F450 SD Center Transmission Gear Box, intended for use with the CEN Ford F450 SD scale truck.
This product was added to our catalog on March 4, 2022
