RPM80702, RPM Traxxas Slash 4x4 Front or Rear A-arms (Black)
RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more!
Features:
They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off of each A-arm! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!
We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over the RPM traditional look with our 30 degree leading and trailing edges, and huge bosses for the shock and sway bar mounts. Additionally, you now have the option of a bit of color with either blue or black to choose from.
RPM A-arms are molded in RPM trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!
This product was added to our catalog on March 2, 2021
RPM81465, RPM E-Revo 2.0 Front Right Suspension Arm Set (Blue)
This is the RPM E-Revo 2.0 Front Right Suspension Arm Set, including the front right upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams!
RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!
RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.
Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.
This product was added to our catalog on March 16, 2021
RPM81515, RPM E-Revo 2.0 Front Left Suspension Arm Set (Blue)
This is the RPM E-Revo 2.0 Front Left Suspension Arm Set, including the front left upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams!
RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks.
RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.
Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.
This product was added to our catalog on April 6, 2021
RPM80182, RPM Traxxas Rustler/Stampede Rear A-Arms (Black) (2)
A set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede trucks.
This product was added to our catalog on December 16, 2021
RPM80242, RPM Front A-Arms (Black) (Rustler, Stampede & Slash) (2)
This is an optional RPM Front A-Arm Set, for the Traxxas Slash 2wd, Nitro Slash, e-Rustler & e-Stampede 2wd. These arms are built to withstand abuse. Plus, they shave some unwanted unsprung weight as well! RPM Front A-arms are nearly 25% lighter than stock versions of the same A-arms, and are backed by RPM's world-renowned breakage warranty. Additionally, RPM has increased clearance areas in the outer portion of the A-arms to allow increased droop travel when used in conjunction with RPM oversized bearing carriers (RPM80372 & RPM80382).
RPM front A-arms for the Electric versions of the Traxxas Slash, Rustler & Stampede are sold in pairs and are available in black, green, blue and red. These A-arms are molded with what is fast becoming an RPM trademark design of angled leading and trailing edges to reduce frontal edge mass and improve the a-arm’s ability to ride up and over tall obstacles instead of slamming into them. RPM A-arms are extremely rigid for superior ride and stability over the roughest tracks and terrain.
Features:
Nearly 25% lighter than stock
Stronger material resists flexing and breaking
Increased clearance in outer area of arms
This product was added to our catalog on December 16, 2021
RPM80662, RPM Traxxas X-Maxx Oversized Front Axle Carriers w/Bearings (2)
RPM Traxxas X-Maxx Oversized Front Axle Carriers feature increased durability and larger inner bearings. Stock bearings are a mere 20x27x4mm while the oversized bearings RPM uses are gigantic a 20x32x7mm. This delivers a load rating that is nearly 300% higher than the stock bearings while the static load rating is over 300% higher. That’s triple the strength of the stock inner bearings.
Features:
Replaces stock Traxxas TRA7737
Includes gigantic 20x32x7mm inner bearings
Massive steering support ribs for the strongest possible carriers
Outer bearings not included (Stock bearings are used)
Sold in pairs (1 Left/1 Right)
This product was added to our catalog on May 18, 2021
RPM81732, RPM Traxxas X-Maxx Oversized Rear Axle Carriers
RPM Oversized Rear Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of this beast of a truck. The first being durability - these carriers are designed to handle some serious abuse. RPM Oversized Axle Carriers feature massive support ribs for the strongest possible carriers available.
The other major improvement is larger inner axle bearings. The stock inner bearings are a mere 20x27x4mm. The oversized bearings are gigantic 20x32x7mm bearings! That’s 5mm larger on the diameter and 3mm on the width! That equates to a dynamic load rating that is nearly 300% higher than the stock bearing while the static load rating is over 300% higher! The differences are so dramatic you’ll wonder why these didn’t come stock.
RPM Oversized Rear Axle Carriers are molded in black and backed by the RPM limited lifetime warranty against breakage. You can’t go wrong with RPM parts on your X-Maxx.NOTE: RPM Oversized Rear Axle Carriers replace the stock Traxxas TRA7752 part. Each package is sold as a pair (one left and one right) and includes two inner oversized bearings (one for each side). Outer bearings are stock Traxxas bearings (TRA5106 or TRA5106A) and are not included in this kit.
This product was added to our catalog on December 16, 2021
RPM70862, RPM LaTrax Front/Rear Suspension Arm (2)
This is an optional set of two RPM LaTrax Front or Rear Suspension Arms, intended for use with the Traxxas LaTrax Prerunner, Teton or SST kits. These lightweight optional parts are a strong, rigid upgrade for your 1/18th scale Latrax. Features:Sold in pairsLightweight, rigid option over stock partsMade in the USA
This product was added to our catalog on December 16, 2021
RPM81670, RPM Traxxas X-Maxx 20x32x7mm Oversized Inner Bearing (2) (RPM81732)
RPM Traxxas X-Maxx Oversized Inner Bearings are replacement bearings for X-Maxx trucks equipped with optional RPM Traxxas X-Maxx Oversized Axle Carriers (RPM81732).
NOTE: These bearings are 20x32x7mm in size and are not compatible with stock Traxxas axle carriers (TRA7752).
This product was added to our catalog on December 16, 2021
RPM70510, RPM Traxxas X-Maxx Threaded Hinge Pin Set
This is an optional RPM Threaded Hinge Pin Set for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms, are manufactured from stainless steel and are tough as nails! If you’ve lost or damaged your stock hinge pins, or perhaps you’re tired of losing those tiny hinge pin retaining screws, give RPM threaded hinge pins a shot and never look back!
Tech Notes: RPM Threaded Hinge Pins are 4mm x 56mm and work in the outer A-arm hinge pin location. Each kit comes with 4 – threaded hinge pins and 4 – M3 locknuts. Our hinge pins can be used as a replacement for CEN GS025 hinge pins as well but RPM versions use a 3mm locknut instead of a 4mm version. When used with the X-Maxx (using stock or RPM A-arms), some minor modification of the A-arms is required for the hinge pins to fit (see instructions for more information).
This product was added to our catalog on December 16, 2021
RPM81462, RPM E-Revo 2.0 Front Right Suspension Arm Set (Black)
This is the RPM E-Revo 2.0 Front Right Suspension Arm Set, including the front right upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams!
RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!
RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.
Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.
This product was added to our catalog on December 16, 2021
RPM81512, RPM E-Revo 2.0 Front Left Suspension Arm Set (Black)
This is the RPM E-Revo 2.0 Front Left Suspension Arm Set, including the front left upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams!
RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks.
RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.
Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.
This product was added to our catalog on February 6, 2021
RPM80492, RPM Front A-Arms (Black) (Nitro Rustler & Bandit) (2)
Product Details
Overview
RPM sets the standard in the R/C industry for durability and all out rugged performance. Our Traxxas Nitro Rustler, Nitro Stampede, & Nitro Sport A-arms are built to stand up against the toughest abuse from the backyard basher all the way to the top-level racers. Our A-arms incorporate all stock geometry; yet have been redesigned for strength, looks, performance, and durability. We build these A-arms from our well-known trademark blend of nylons for bulletproof performance and unsurpassed durability. They carry our reputable warranty against breakage as well. These A-arm sets are sold in pairs and come in either black or our extremely popular blue, which is molded into the A-arm for scratch resistant color that lasts and lasts.
Product Specifications
Material
Plastic
Color
Black
This product was added to our catalog on December 16, 2021
RPM70652, RPM Slash LCG 4x4 & Rally Nerf Bar Set (Black)
This is an optional RPM Slash LCG 4x4 & Rally Nerf Bar Set. The chassis layouts of the 1/10th scale Rally LCG & Slash 4x4 LCG changed the original design of the stock nerf bars, making the RPM80622 & RPM80625 nerf bars unusable. These LCG nerf bars fix that problem and are a direct, perfect fit!
RPM LCG Nerf Bars have added structural support to help strengthen the body and reduce impact forces transferred to Black Nerf Bars for the 1/10th Rally, LCG Slash 2wd & LCG Slash 4x4. The additional cross bracing optimizes the rigidity while absorbing additional impact energy anything less than RPM would have crumpled under!
RPM Nerf Bars are stock replacement parts and work with all stock Traxxas chassis nerf bars TRA7423. RPM Nerf Bars are proudly made in the USA, molded in either blue or black from our engineering grade nylons and backed by our limited lifetime warranty against breakage.
Features:
Available in Black and Blue
This product was added to our catalog on July 31, 2021
RPM82352, RPM Traxxas X-Maxx Upper & Lower A-Arms (Black) (2)
RPM Traxxas X-Maxx Upper & Lower A-Arms were developed to handle the weight and the punishment the massive X-Maxx trucks can dish out. Starting with the upper A-arm, RPM used their proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it! The lower A-arm has better ground clearance than stock A-arms and has a cross section based off of the proven RPM 1:5 scale HPI Baja A-arms so you know they’re tough! They also created a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won’t force you into the “walk of shame”. They’re also universal fit, which means they’ll fit on any corner of your truck!
RPM X-Maxx A-arms are molded in RPM's trademark blend of incredibly tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by their industry-leading limited lifetime warranty against breakage for worry-free performance you can count on!NOTE: Each package comes with one upper and one lower A-arm. Four packages will be needed to complete one full vehicle.
Features:Stronger than stockLighter than stockSold with 1 – upper and 1 – lower a-arm in each package4 packages needed per vehicleReplaces the upper a-arm from stock Traxxas TRA7729Replaces the lower a-arm from stock Traxxas TRA7730 & TRA7731
This product was added to our catalog on December 16, 2021
RPM80552, RPM X-Maxx Body Savers
This is the RPM Body Savers Set for the Traxxas X-Maxx. The clipless body mounting system by Traxxas seems to have one flaw - the mounting screw holes crack easily, rendering those expensive bodies useless fairly quickly.
RPM Body Savers for the X-Maxx are a simple, yet clever solution to solve that problem. Out front, they look like molded hood vents and A/C vents while in the rear, they look like exposed sections of riveted metal. It’s a perfect way to camouflage the intended purpose and yet still keep the body firmly attached. RPM Body Savers are molded in black from ultra strong, engineering grade nylons for unmatched performance and are sold with enough Body Savers to protect the entire vehicle.
Features:Works with new or damaged bodiesDisguised for improved visual appealWorks with Traxxas #7711, #7711A & #7717G, #7711R & #7711X bodies
This product was added to our catalog on December 16, 2021
RPM81662, RPM Losi Tenacity/Lasernut Front A-Arm (Black) (2)
These are the RPM Losi Tenacity/Lasernut Front A-Arms. Each pair of RPM A-arms is molded in a blend of nearly indestructible nylons and manufactured in the USA. These A-arms are designed to withstand even the toughest conditions, so you can push your vehicle to the limit without worrying about breakage. Performance has been improved by tightening the tolerances of the A-arm to create much smoother, more consistent suspension movement for reliable camber, caster, and toe angle settings. The suspension geometry is set to stock settings, which makes installing a set of RPM A-arms a simple swap with very little needed to be done to get back on the track.
RPM Tenacity and Lasernut A-arms feature a slim, aerodynamic shape that helps them transition up and over objects, rather than bluntly plowing into them. Designed with 30° leading and trailing edges, gives each A-arm a sleek look and feel. To provide additional strength where it's needed most, RPM has beefed up key areas such as the outer hinge pin support diameters by as much as 60%. This means that even less than perfect “incidents” won’t end your day of fun. Experience unparalleled performance on the track or off-road with these ultra strong, incredibly durable A-arms. Package includes two front A-arms with hardware.
NOTE:
RPM Front A-arms for the Losi Tenacity fit the following Tenacity platforms: U4 Lasernut, TT and DB. Also fits the following discontinued models: Pro, Monster Truck and T.
RPM Rear A-arms replace stock Losi LOS234016. Does not include metal tubes for outer hinge pins. Transfer of stock metal tubes to RPM a-arms is required.
This product was added to our catalog on November 25, 2023
RPM81092, RPM Losi Tenacity/Lasernut Rear A-Arm (Black) (2)
This product was added to our
These are the RPM Losi Tenacity/Lasernut Rear A-Arms. Each pair of RPM A-arms is molded in a blend of nearly indestructible nylons and manufactured in the USA. These A-arms are designed to withstand even the toughest conditions, so you can push your vehicle to the limit without worrying about breakage. Performance has been improved by tightening the tolerances of the A-arm to create much smoother, more consistent suspension movement for reliable camber, caster, and toe angle settings. The suspension geometry is set to stock settings, which makes installing a set of RPM A-arms a simple swap with very little needed to be done to get back on the track.
RPM Tenacity and Lasernut A-arms feature a slim, aerodynamic shape that helps them transition up and over objects, rather than bluntly plowing into them. Designed with 30° leading and trailing edges, gives each A-arm a sleek look and feel. To provide additional strength where it's needed most, RPM has beefed up key areas such as the outer hinge pin support diameters by as much as 60%. This means that even less than perfect “incidents” won’t end your day of fun. Experience unparalleled performance on the track or off-road with these ultra strong, incredibly durable A-arms. Package includes two rear A-arms with hardware.
NOTE:
RPM Rear A-arms for the Losi Tenacity fit the following Tenacity platforms: U4 Lasernut, TT and DB. Also fits the following discontinued models: Pro, Monster Truck and T.
RPM Rear A-arms replace stock Losi LOS234017.
This product was added to our catalog on November 21, 2023
RPM70392, Front Shock Tower, Black: SLH 4x4, ST 4x4
Traxxas Rally
Traxxas Slash 4x4
Traxxas Stampede 4x4
This product was added to our catalog on December 16, 2021
RPM70795, RPM LaTrax Teton/Rally Front/Rear Chassis & Differential Covers
This is the RPM LaTrax Teton/Rally Front/Rear Chassis and Differential Covers. These tough covers offer the incredible strength that RPM parts are known for. By rerouting the upper chassis plates around the outside of the pivot ball mounts this has allowed RPM to link the pivot ball mount directly into the differential bulge. This creates a much stronger setup along with being combined with RPM's engineering grade materials gives you an excellent boost in strength. Package includes one front chassis cover, one rear chassis cover, one front differential cover and one rear differential cover.
This product was added to our catalog on October 26, 2023
