RPM70492, RPM Toe-In Gauge
This is a RPM Toe-In Gauge, and is intended for use with 1/10 and 1/8 on and off road vehicles. If you are a hobbyist that enjoys R/C vehicles or an all out R/C racer or anywhere in between, this tool is a must for your toolbox! This toe-in gauge allows you to do trackside checks of the toe angles without removing the wheels! This gauge checks toe through the simple method of comparing the width of the wheels at the rear of the tire to the width of the wheels at the front of the tire! This gauge is accurate to within one half of a degree per side and closer, and can also be used to check legal width of off-road buggies and trucks. The gauge comes with a second thumbscrew hole to check narrower vehicles such as sedans as well.
This product was added to our catalog on December 16, 2021
RPM81762, RPM X-Maxx Rear Bumper Mount
The RPM Traxxas X-Maxx Rear Bumper Mount is a beefy alternative to the small beam supports offered with stock parts. This upgrade is built more like a massive skid plate with tons of durability and flexibility to help absorb rear impacts and heavy rear-end-first collisions.
Each RPM Rear Bumper Mount is designed from RPM's ultra-tough blend of engineering grade nylons for protection you can trust. Additionally, the Rear Bumper Mount comes with four small attachment points for the RPM Low Visibility Wheelie Bars (RPM81582 – sold separately)! If you’re tired of dragging or destroying your rear bumper, the combination of this Rear Bumper Mount and Low Visibility Wheelie Bars will solve those issues permanently!
NOTE: Replaces stock Traxxas Rear Bumper Support (TRA7734).
This product was added to our catalog on December 16, 2021
RPM81342, RPM X-Maxx Front Bumper Mount (Black)
The RPM Front Bumper Mount for the Traxxas X-Maxx is an ultra strong alternative to the small beam supports offered with the stock mount. This RPM upgrade is a direct replacement upgrade for the stock Traxxas Front Bumper Support (TRA7733) and replaces the small tubular posts with a large, 4mm thick plate that provides durability and flexibility to help absorb heavy impacts. Its simplistic plate design is key to its superior impact protection. By improving frontal impact absorption, this front bumper mount will save you time, frustration and money by protecting those more fragile internal components.
This product was added to our catalog on December 16, 2021
RPM82355, RPM Traxxas X-Maxx Upper & Lower A-Arms (Blue) (2)
RPM Traxxas X-Maxx Upper & Lower A-Arms were developed to provide customers with stronger A-arms that could handle the weight and the punishment these massive trucks can dish out. These X-Maxx A-arms are designed to be the strongest, lightest arms available! Starting with the upper A-arm, RPM used their proven A-arm designs from past successful builds to create an upper support structure sure to handle anything you can throw at it. The lower A-arm has better ground clearance than the stock arm and has a cross section based off of the proven RPM 1:5 scale HPI Baja A-arms. They also added a double support beam on the lower arms to spread impact energy over a larger area, meaning hard hits won’t force you into the “walk of shame”. They’re also universal fit, which means they’ll fit on any corner of your truck! No more worrying which arm fits where.
RPM X-Maxx A-arms are molded in RPM's trademark blend of tough, engineering grade nylons and made in the USA. RPM X-Maxx arms are backed by RPM's industry-leading limited lifetime warranty against breakage for worry-free performance you can count on!
NOTE: Each package includes one upper and one lower A-arm. Four packages will be needed to complete one full vehicle.
This product was added to our catalog on December 16, 2021
RPM80312, RPM X-Maxx Roof Skid Rails (Black)
This is an optional set of RPM X-Maxx Roof Skid Rails, intended for use with the Traxxas X-Maxx kits. If you own an X-Maxx, there’s a good chance you’re going to wind up on your lid. The 19+ lbs. (8.6+ kgs.) of your car will rip through that thin lexan body in no time at all if you don’t find a way to protect it.
RPM Roof Skid Rails are a simple add-on that bolts to the roof of your truck using 3 screws for each rail (2 rails sold per package - hardware included). Full-length under body support plates are included to prevent the rails from getting yanked off once you flip your monster X-Maxx. With RPM Roof Skid Rails in place, you now have an inexpensive buffer protecting the roof of your expensive body from damage, with proven RPM nylons absorbing the slide!
NOTE: RPM Roof Skid Rails are tested to work with Traxxas TRA7711, TRA7711A & TRA7717G, TRA7711R & TRA7711X bodies only. They have not been tested nor are they guaranteed to work with any other Traxxas or aftermarket bodies.
Features:Reduces roof damage from inverted slidesProtects the X-Maxx bodyUnder body support plates for added pull-through protection
This product was added to our catalog on December 16, 2021
RPM80432, RPM X-Maxx Shock Shaft Guards (Black)
This is an optional pack of RPM Black X-Maxx Shock Shaft Guards, intended for use with the Traxxas X-Maxx 8S 4WD Monster Truck. Protect your shock shafts and seals from running damage and the deteriorating elements with this simple design. This part replaces the stock shock spring cups with ones that have mounting holes for a thin but tough shield that rises up to the base of the shock body. The guard completely blocks debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well.
The front shield of the guard covers over a impressive 100° of frontal exposure. That means rocks and debris thrown from the front tires or competitors won’t ever hit your shock shafts. RPM Shock Shaft Guards are zero friction protection devices, meaning these guards never touch the working elements of the shocks. As an added bonus, RPM increased the length of the tubular spring support of the spring cup by nearly 2mm (5/64”). The added length helps prevent the spring from jumping off of the spring perch when the conditions are less than ideal.
Features:Over 100° of frontal protectionZero friction protection devicesIncreased spring cup spring supportFits stock Traxxas X-Maxx GTX shocksSold in pairs
This product was added to our catalog on December 16, 2021
RPM80435, RPM X-Maxx Shock Shaft Guards (Blue)
This is an optional pack of RPM Blue X-Maxx Shock Shaft Guards, intended for use with the Traxxas X-Maxx 8S 4WD Monster Truck. Protect your shock shafts and seals from running damage and the deteriorating elements with this simple design. This part replaces the stock shock spring cups with ones that have mounting holes for a thin but tough shield that rises up to the base of the shock body. The guard completely blocks debris from striking the shock shaft. The back and sides are open, which prevents debris from building inside the guard as well.
The front shield of the guard covers over a impressive 100° of frontal exposure. That means rocks and debris thrown from the front tires or competitors won’t ever hit your shock shafts. RPM Shock Shaft Guards are zero friction protection devices, meaning these guards never touch the working elements of the shocks. As an added bonus, RPM increased the length of the tubular spring support of the spring cup by nearly 2mm (5/64”). The added length helps prevent the spring from jumping off of the spring perch when the conditions are less than ideal.
Features:Over 100° of frontal protectionZero friction protection devicesIncreased spring cup spring supportFits stock Traxxas X-Maxx GTX shocksSold in pairs
This product was added to our catalog on December 16, 2021
