TRA8026X, Traxxas TRX-4/TRX-6 LED Rock Light Kit
Traxxas TRX-4/TRX-6 LED Rock Light Kit. Package includes one LED light kit intended for the TRX-4 or TRX-6. NOTE:
Requires TRA8028 power supply
Works with fenders TRA8018, TRA8072 or TRA8080
This product was added to our catalog on September 7, 2021
TRA8038, Traxxas TRX-4 1979 Chevrolet Blazer Complete LED Light Set w/Power Supply
The Traxxas TRX-4 1979 Chevrolet Blazer Complete LED Light Set takes scale realism to the next level with working headlights, tail lights, and side markers. Fully waterproof and built Traxxas-Tough, the LED light kit is ready for your wildest adventures. No matter where the trail leads, day or night, the TRX-4 Chevrolet K5 Blazer will light the way.
The Blazer light kit’s modular design make it easy to install and accessorize. The light kit includes all the necessary hardware and installation takes only a few minutes. Adding optional rock lights (not included) is easy thanks to the power block’s modular design.
Features:
Sealed waterproof design
High / low headlight setting
Precision-engineered for direct fit on the Blazer body
Plug and play design with modular connectors
Traxxas LED lighting module
Regulated to provide consistent and reliable power output
with batteries from NiMH to 3S LiPo
Eliminates overheating, glitching, and other electronics
issues common with unmatched aftermarket systems
Clear headlight lenses with reflectors, red tail lights, and amber side markers
Includes:
Headlights
Tail lights
Side marker lights
Distribution block
Power supply
This product was added to our catalog on September 7, 2021
TRA8254, Traxxas TRX-4 Slipper Clutch Rebuild Kit
Slipper clutch rebuild kit includes steel discs (2), friction inserts (2), 4 mm locknut, and spring washers (2)
This product was added to our catalog on September 7, 2021
8086 - LED expedition rack scene light kit (fits #8111 body, requires #8028 power supply)
TRA8086, LED EXPEDITION RACK LIGHT COMPLETE 8111
TRX-4® Sport LED Scene Lights attach directly to the Expedition Rack to illuminate the sides of the trail. Four separate LED lights tilt up or down to surround the TRX-4 with light. The LED scene lights require TRX-4 Sport Expedition Rack #8120, or 8120X.
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® 2021 Ford® Bronco
TRX-4® Equipped with Traxx®
TRX-4® Mercedes-Benz® G 500® 4X4²
TRX-4® Scale and Trail™ Crawler
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-4® Unassembled Kit
This product was added to our catalog on September 7, 2021
82076-4, Traxxas TRX-4 1/10 Trail Crawler Truck w/'79 Chevrolet K5 Blazer Body (Black) w/TQi 2.4GHz Radio
The Traxxas TRX-4 Blazer honors the rich history of this renowned bowtie, with a beautifully detailed reproduction of the 1979 K5 Blazer built on the proven TRX-4 chassis. Introduced in 1969, the Chevrolet Blazer was General Motors’ two-door entry into the booming sport utility market. Its shorter wheelbase and capable suspension instantly made it a favorite in the 4X4 world, earning the love of enthusiasts and collectors. Outfitted with replica Rally wheels, a highly detailed chrome grill, and a full complement of scale details, the TRX-4 Blazer combines the iconic style of the Blazer with toughness and technology that could only come from Traxxas.
Remote Locking Differentials
Traxxas gives you the versatility to lock and unlock the front and rear differentials to suit your driving needs directly from your transmitter. Leave the differentials unlocked for relaxed driving on the trail with smooth, tight turning and better handling at high speeds. When the trail gets technical, lock the front and rear differentials, or just the front, for superior grip over extreme terrain. This patented design has been proven rugged and capable in the Traxxas Summit. Sleeved micro cables control the differential action for scale appearance, without limiting the huge suspension articulation.
Hi/Low Range Transmission
When the going gets tough, use your transmitter to shift into low range for incredible 4-wheel drive pulling torque. Shift into high range for blasting down the trail. The plush suspension design absorbs rough terrain with ease and delivers outstanding scale appearance. Unmatched versatility makes the TRX-4 Scale and Trail Crawler adaptable to just about any situation or driving style.
Waterproof
Traxxas was the first to bring you fully waterproof RC vehicles years ago with their innovative designs. The TRX-4 Scale and Trail Crawler is fully waterproof for how you like to really play, not “splash resistant.” There is a big difference. Traxxas’ patented innovation gives you the freedom to tackle creeks, snow, and mud without worrying about water in your electronics.
Torque Twist Eliminated
The portal axles use gear reduction right at the wheels that dramatically reduces undesirable torque twist. Total axle gear reduction is over twice non-portal designs. The Titan 550 motor torque is translated into straight, powerful, forward motion, rather than wasted energy twisting your rig right off the rocks.
The Power of Portals
The TRX-4 Scale and Trail Crawler is equipped right out of the box with Traxxas' game-changing portal axle set. Portal axles lift the truck at the wheels for huge center pumpkin ground clearance. In order to achieve the same clearance with straight axles (and not get stuck), your tires would have to be over an inch taller than the TRX-4's tires. Straddling boulders with ease, the TRX-4 chassis definitely takes the path less traveled and simply leaves all the others behind.
Improved Geometry
Portal axle geometry raises the axle link mounts and center driveshaft, greatly reducing critical driveshaft and suspension link angles. This means less strain on the driveshafts, and the higher suspension links provide greater clearance with less scraping and dragging across the rocks. The steering drag link and tie rod are also raised up and out of harm's way.
Rigid Steel Frame
A heavy-duty formed-steel ladder frame with molded cross members creates an extremely rigid backbone that lets the suspension do the work it was designed to do. You’ll feel the difference on trails where the elimination of chassis flex allows for precise wheel placement when navigating technical terrain.
Scale Detail
The TRX-4 Trail and Scale is being shown with the legendary Land Rover Defender body, complete with exciting scale details for an authentic 4-wheelin’ experience. Traxxas included a functional spare wheel and tire, an off-road jack, and spare fuel canisters. Secure your trail gear in the included roof basket. There’s even a snorkel for taking the waterproof TRX-4 through creek crossings. The rugged bumpers provide clearance and protection and are equipped with recovery D-rings. The front bumper is designed to be compatible with many popular off-road accessories.
Aluminum GTS Shocks
Oil-filled coil-over GTS shocks were created exclusively for the TRX-4 chassis. These silver-anodized aluminum units deliver silky-smooth damping performance and feature threaded shock bodies for easy ride height adjustments. The convincing scale realism looks great and they perform even better with an O-ring cap seal and dual X-ring shaft seals.
Metal Gear Digital Servo
A full-metal gear digital servo gives you the durability and steering authority you need to confidently and reliably power through tough situations.
Cruise Control
The Traxxas TQi radio system is equipped with cruise control for long-distance treks. Set your speed using the transmitter and then use the multi-function knob to fine-tune it faster or slower to precisely match the pace of your caravan of trail explorers. Cruise control makes it easy and comfortable for the TRX-4 Scale and Trail Crawler to be your companion for hours of driving fun and exploration.
3S Power System
The XL-5 HV electronic speed control brings 3S LiPo capability for stronger, more efficient running. Updated speed control profiles have been added for smooth and precise control. A Trail profile facilitates smooth driving for most of your adventures, while a Crawl profile introduces hill hold and instant reverse for extremely technical courses. Either will help you navigate obstacles with ease, right from the start. Long run times, up to 2 hours, are possible with a Traxxas 3S 5000mAh iD LiPo battery pack!
Canyon Trail 1.9 Tires
The 1.9 Canyon Trail tires and tuned foam inserts are super-soft and grippy to deliver superior bite on rocky surfaces with convincing scale realism. The 12mm steel hex drive makes the TRX-4 chassis compatible with popular 1.9 wheel and tire combinations.
Traxxas Tough
Leave the tools in the bag! The Traxxas TRX-4 chassis is built to handle the rigors of remote locations and all-day driving fun. The foundation begins with a pair of 1.5mm thick steel frame rails. Large diameter steel links and heavy-duty, extra-wide rod ends keep the suspension firmly mounted. Hardened steel CV-style half-shaft joints are ultra reliable, while the brushless-ready steel portal axle and transfer case gears are smooth and quiet. Traxxas’ composite materials have been refined over three decades for the ultimate in strength and durability.
Specifications:
Length: 20.62 inches (524mm)
Front Track: 9.78 inches (249mm)
Rear Track: 9.78 inches (249mm)
Ground Clearance: 3.14 inches (80mm)
Weight: 6.26lb (2.84kg)
Height: 10.05 inches (255mm)
Wheelbase: 12.28 inches (312mm)
Approach Angle: 59°
Departure Angle: 47°
Breakover Angle: 59°
Front Shock Length: 3.54 inches (90mm)
Rear Shock Length: 3.54 inches (90mm)
Front Wheels: 1.9 x 1.02 inches (49 x 26mm)
Rear Wheels: 1.9 x 1.02 inches (49 x 26mm)
Front Tires: 4.64 x 1.89 inches (118 x 48mm)
Rear Tires: 4.64 x 1.89 inches (118 x 48mm)
Hex Size: 12mm
Speed Control: XL-5 HV
Motor (electric): 21T Reverse Rotation
Transmission: 2-speed Hi-Lo, Remote Shifting
Gear Pitch: 32P
Differential Type: 4 Gear, Remote Locking
Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Crossmembers
Brake Type: Electronic “Hill Hold”
Drive System: Shaft Driven 4WD
Steering: Chassis Mounted Servo
Servo: 2075X Metal Gear
Transmitter: TQi™ 2.4 GHz 4-Channel Transmitter
Receiver: TRA6533
Skill Level: 2
Battery Tray: 158.75 L x 47 W x 23/26mm H
Includes:
TRX-4, Ready-To-Race model
XL-5 HV waterproof electronic speed control
Titan 21T reverse rotation motor
TQi 2.4GHz radio system with cruise control
High quality maintenance tools
Needed To Complete:
(1) NiMH (4–7 cell) or LiPo (2S–3S) Battery Pack w/iD Connector
(1) Compatible Battery Charger
(4) "AA" Batteries (for transmitter)
This product was added to our catalog on October 20, 2021
TRA8038X, Traxxas TRX-4 1979 Chevrolet Blazer Pro Scale LED Light Set
Traxxas TRX-4 1979 Chevrolet Blazer Pro Scale LED Light Set. This optional LED light set is intended for the Traxxas TRX-4 when equipped with the 1979 Chevrolet Blazer body. Using this set will allow for headlights with low and high beams, turn signals with automatic cancellation, hazard lights and brake lights with reverse lamps. For maximum power and convenience, add the Traxxas Link and the optional Wireless Module (TRA6511, sold separately) to configure your lights right from your iOS or Android device. The Pro Scale system makes adding lights to your rig easy.
Features:
Headlights with high/low beam settings
Brake lights
Reverse lights
Turn signals with auto-cancellation
Hazard lights
Includes:
(1) Complete LED light Set
(1) Pro Scale Lighting Power Module and mount
(1) Pro Scale Lighting Distribution Block and mount
(1) Motor sensors wire harness
(1) Front and rear light harness
(1) MAXX Link cable
(1) Receiver communication cable
Installation hardware
This product was added to our catalog on February 21, 2023
The Samix TRX-4M Brass Hex Adapter are a great option to lower the center of gravity in your mini crawler. Designed for the Traxxas TRX-4M, these are made from CNC machined brass and add 6g down low. Available in multiple offsets to best suite your build. Package includes four wheel hexes.Features:
Made from CNC machined brass for a precision fit
7mm thick
Direct fit to the Traxxas TRX-4M
Black coating to prevent corrosion
Body mounts & posts, front & rear (complete set)
TRA8215, BODY MOUNTS/POSTS FRONT/REAR
Replacement part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® Equipped with Traxx®
TRX-4® Mercedes-Benz® G 500® 4X4²
TRX-4® Scale and Trail™ Crawler
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 2021 Ford® Bronco
TRX-4® Equipped with Traxx®
TRX-4® Mercedes-Benz® G 500® 4X4²
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-6® Mercedes-Benz® G 63® AMG 6X6
This product was added to our catalog on September 7, 2021
TRA8880, Traxxas TRX4-4 Deep Terrain Traxx Set (4)
The Traxxas Traxx Deep-Terrain Track Set provides the most significant upgrade to traction for the Traxxas TRX-4 Kit. These treaded tracks are a perfect addition to the TRX-4 and all it's trail-ready features, allowing the kit to be practically unstoppable on any terrain.
The Traxx allows the car to straddle larger objects on the trail by raising the portal axle over 16mm for increased ground clearance. Each Traxx has large contact patches and grippy treads to shrug off mud and float across deep sand. An adjustable tension wheel keeps the treads tight while suspended road wheels allow the tread to conform to surface irregularities for maximum traction. Traxx functions similar to portal weights, carrying the bulk of the weight down low for improved stability. Each Traxx drive unit is engineered for rugged, yet smooth performance, with oil-filled dampers on each drive unit to control rotational movements and to help keep the tread glued to the surface. The rear Traxx drive units are longer to allow climbing steeper grades with authority and confidence. Tackle any terrain with the Traxx Deep-Terrain Set!
Features:
Virtually unstoppable traction on practically any terrain including mud, sand, and even snow
Fully-assembled for installation in just minutes
Oil-filled coilover dampers to control rotational movement
Suspended road wheels allow treads to conform to irregular surfaces
Specially designed one-piece rubber treads resist de-tracking
Drastically improves ground clearance and approach angles
Designed for all-weather fun
Sealed bearings on drive wheels
Low-maintenance self-lubricating bushings on guide wheels
Longer rear Traxx drive units for steep climbing stability
Re-usable molded foam storage box
Sold as a set of four
Fits all TRX-4 models
Pro Tips:
Use a High-Torque 400oz-in servo and a High-Output BEC for maximum turning power in all conditions.
Slight body trimming may be required. Use TRX-4 Long-Arm Lift Kit to minimize trimming and increase ground clearance.
On TRX-4 models equipped with T-Locks, keep the front and rear differentials locked for optimal traction and performance.
On TRX-4 models equipped with two-speed transmissions, always use low gear.
Specifications:
Front weight: 13.2oz (374g) Each
Rear Weight: 13.7oz (387g)
Total Weight Increase: 2 lb., 5.4 oz. (1060g)
Improved Ground Clearance: 16.8mm
Includes:
(4) Deep-Terrain Tracks
(8) Cap Head Screws
This product was added to our catalog on September 7, 2021
TRA8267, WEIGHT PORTAL HOUSNG BRASS 34G
Brass portal weights add valuable mass (34 grams) down low for improved off-road stability, without the negative effects of weighted wheels. Includes 2.5x8 mm screws (6) Weights require aluminum outer portal housings.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This product was added to our catalog on September 7, 2021
TRA8090, Traxxas TRX-4 1969/1972 K5 Chevrolet Blazer Complete LED Light Set w/Power Supply
Traxxas TRX-4 1969/1972 K5 Blazer Complete LED Light Set with Power Supply. This optional light set is intended for the Traxxas TRX-4 1969 or 1972 K5 Blazer Body. These LED's are fully waterproof and ready to light up the trail and keep the adventure going day or night. Package includes one light kit, one power supply and hardware.
This product was added to our catalog on September 7, 2021
TRA8140X, Traxxas TRX-4 Complete Long Arm Lift Kit (Blue)
The Traxxas TRX-4 Complete Long Arm Lift Kit includes everything you need to properly install a massive lift under your TRX-4 including long-arm links, longer aluminum shocks, taller springs, extended driveshafts, and a revised front servo mount to maintain proper steering geometry.
This product was added to our catalog on September 7, 2021
Samix TRX-4M Aluminum Servo Horn. Designed as a direct fit for the Traxxas TRX-4M steering servo, this aluminum servo horn offers increased durability, improved steering precision and custom looks. Available in multiple colors this is an excellent addition for your build. Package includes one servo horn with mounting screw.
Samix TRX-4M Aluminum Servo Horn. Designed as a direct fit for the Traxxas TRX-4M steering servo, this aluminum servo horn offers increased durability, improved steering precision and custom looks. Available in multiple colors this is an excellent addition for your build. Package includes one servo horn with mounting screw.
8867 - Bumper, front, winch, medium (includes bumper mount, D-Rings, fairlead, hardware) (fits TRX-4® 1979 Bronco and 1979 Blazer with 8855 winch) (217mm wide)
TRA8867, BUMPER WINCH '79 BRNCO/BLZR
Accessory part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
This product was added to our catalog on September 7, 2021
TRA8290, Traxxas TRX-4 Motor Plate & Upper Spur Gear Cover
Replacement motor plate and upper spur gear cover
This product was added to our catalog on September 7, 2021
Traxxas Interior, Chevrolet Blazer (1969 -1972)
Interior, Chevrolet Blazer (1969 -1972) (includes rollbar, gauge bezel, steering wheel and column, shifter, armrest, decals) (fits #9111, 9112, 9130, or 9131 series bodies) (#9111 or 9112 series bodies require #9128 body cage for installation)
This product was added to our catalog on June 16, 2021
TRA8090, Traxxas TRX-4 1969/1972 K5 Chevrolet Blazer Complete Pro Scale LED Light Set
Traxxas TRX-4 1969/1972 K5 Blazer Complete Pro Scale LED Light Set. This optional LED light set is intended for the Traxxas TRX-4 when equipped with the 1969 or 1972 K5 Blazer body. Using this set will allow for headlights with low and high beams, turn signals with automatic cancellation, hazard lights and brake lights with reverse lamps. For maximum power and convenience, add the Traxxas Link and the optional Wireless Module (TRA6511, sold separately) to configure your lights right from your iOS or Android device. The Pro Scale system makes adding lights to your rig easy.
Features:
Headlights with high/low beam settings
Brake lights
Reverse lights
Turn signals with auto-cancellation
Hazard lights
Includes:
(1) Complete LED light Set
(1) Pro Scale Lighting Power Module and mount
(1) Pro Scale Lighting Distribution Block and mount
(1) Motor sensors wire harness
(1) Front and rear light harness
(1) MAXX Link cable
(1) Receiver communication cable
Installation hardware
This product was added to our catalog on September 7, 2021
The Samix TRX-4M Brass Shock Cups are a great option to lower the CG in your micro crawler. Made from brass, each weigh 6g and are slotless to keep them from falling off while using a soft spring. Intended for the Traxxas TRX-4M, these are a direct fit to the factory shocks. Package includes four shock cups.Features:
Made from brass to lower CG
Slotless design to increase reliability
Direct fit to factory shocks
Black coated to prevent oxidation
TRA8167 - Screws, 2x10mm cap-head, self-tapping (hex drive) (10)
TRA8167, SCREWS CAP-HEAD 2X10MM HEX ST
Replacement part for these models:
TRX-4® 1979 Chevrolet® Blazer
TRX-4® 1979 Ford® Bronco
TRX-4® 2021 Ford® Bronco
TRX-4® Equipped with Traxx®
TRX-4® Mercedes-Benz® G 500® 4X4²
TRX-4® Scale and Trail™ Crawler
TRX-4® Sport Unassembled Kit
TRX-4® Sport
TRX-4® Unassembled Kit
TRX-6® Mercedes-Benz® G 63® AMG 6X6
This product was added to our catalog on September 7, 2021
TRA8252R, PORTAL HOUSNG INNER FRNT RED
Add durability and style to your portal axles with these aluminum front inner portal housings. Each housing is carefully machined from tough 6061-T6 aluminum for unmatched strength and precision. The aluminum is then coated with a brilliant anodized finish for high-tech style. TRX-4® aluminum accessories are made by Traxxas, for Traxxas, to guarantee a perfect hassle-free fit every time. Includes 3x12 mm screws (2).
This product was added to our catalog on September 7, 2021
TRA8091, Traxxas TRX-4 Chevrolet Blazer Pro Scale Advanced Lighting Control System Installation Kit
Traxxas TRX-4 Chevrolet Blazer Pro Scale Advanced Lighting Control System Installation Kit. Designed to work with the Traxxas Pro Scale Advanced Lighting Control System (TRA6591) this light kit specifically fits the TRX-4 1969 and 1972 Blazer bodies. The kit includes reverse lights and hardware as well as additional LED lights.
Includes:
(1) Pro Scale Lighting Control Mount
(1) Reverse Lights
(1) Turn Signal Harness
Mounting Hardware
This product was added to our catalog on September 7, 2021
SAMTRX4-6074-BK, Samix Traxxas TRX-4 Aluminum Battery Strap (Black)
Features:
Dissipate heat from your battery pack
Available in 3 color
Laser etched logo
Traxxas TRX-4
XTA-XS-SCX22139, Xtra Speed SCX10 Adjustable Drop Hitch Receiver
COMPATIBILITY
Axial SCX10 I
Traxxas TRX-4
This product was added to our catalog on December 16, 2021
TRA9123, Traxxas 1969 Chevrolet Blazer Grille
The Traxxas 1969 Chevrolet Blazer Grille is a great way to add the classic 1969 grille to your Traxxas TRX4 equipped with the optional 1969 Blazer body (TRA9112). This grille features the classic turn signal lenses, hood emblem and headlight housings. These details will add that extra bit of realism to your TRX-4. Package includes one grille, five retainers, two headlight housings with lenses, two turn signal lenses, one hood emblem with mount and hardware.
This product was added to our catalog on September 24, 2021
TRA9530R, Suspension arm, front (right), red Sledge
Heavy-duty Sledge® right front suspension arm is formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look.
This product was added to our catalog on February 16, 2024
TRA9531G, Suspension arm, front (left), green Sledge
Heavy-duty Sledge® left front suspension arm is formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look.
This product was added to our catalog on February 16, 2024
TRA9531X, Suspension arm, front (left), blue Sledge
Heavy-duty Sledge® left front suspension arm is formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look.
This product was added to our catalog on February 16, 2024
TRA9530G, Suspension arm, front (right), green Sledge
Heavy-duty Sledge® right front suspension arm is formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look.
This product was added to our catalog on February 16, 2024
TRA9531R, Suspension arm, front (left), red Sledge
Heavy-duty Sledge® left front suspension arm is formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look.
This product was added to our catalog on February 16, 2024
TRA9530X, Suspension arm, front (right), blue Sledge
eavy-duty Sledge® right front suspension arm is formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look.
This product was added to our catalog on February 16, 2024
TRA9530T, Suspension arm, front (right), orange Sledge
Heavy-duty Sledge® right front suspension arm is formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look.
This product was added to our catalog on February 16, 2024
TRA9531T, Suspension arm, front (left), orange Sledge
Heavy-duty Sledge® left front suspension arm is formed from our toughest composite material for high loads and hard landings. Available in several bright colors, suspension arms are a great way to create a custom look.
This product was added to our catalog on February 16, 2024
Samix TRX-4M Aluminum Shock Body Full Set. These CNC machined aluminum shock bodies offer a high quality, durable and great looking option for the TRX-4M rock crawler. Designed as a direct replacement these provide an excellent fluid seal, adjustable aluminum pre-load collars and a durable anodized finish. Package includes four pre-assembled shock bodies.
TRA8252A, PORTAL HOUSNG INNER FRNT CHRCL
Add durability and style to your portal axles with these aluminum front inner portal housings. Each housing is carefully machined from tough 6061-T6 aluminum for unmatched strength and precision. The aluminum is then coated with a brilliant anodized finish for high-tech style. TRX-4® aluminum accessories are made by Traxxas, for Traxxas, to guarantee a perfect hassle-free fit every time.
This product was added to our catalog on September 7, 2021
TRA8252, PORTAL HOUSING INNER FR L&R
This is a replacement Traxxas TRX-4 Front Inner Portal Drive Housing.
This product was added to our catalog on September 7, 2021
