82016-4, Traxxas TRX-4 1/10 Scale Trail Rock Crawler Assembly Kit w/TQi 2.4GHz Radio The Traxxas TRX-4 Scale and Trail Crawler chassis kit offers the same innovative features as the RTR vehicle, combined with the fun and excitement of building your own kit. Build your own portal axles, high/low range transmission, and remotely locking differentials. All the parts are organized neatly in labeled bags with waterproof electronics and pre-assembled shocks and suspension links. A fully illustrated color manual makes the kit as much fun to construct as it is to take off-road. Easy to Follow Assembly InstructionsThe TRX-4 Chassis Kit isn’t just for expert hobbyists. Traxxas goes the extra mile to make the full-color instruction book easy to follow and fun to use. Each section corresponds to a labeled bag with step-by-step assembly instructions. True-to-scale part illustrations and ruler charts make it easy to differentiate between different screws, bearings, and gears. Helpful assembly tips and clear illustrations take the frustration out of the assembly process. Have fun on the workbench and on the trail with the new TRX-4 Chassis Kit. Features: Easy to follow full-color assembly manual Trail-tuned XL-5 HV Waterproof Electronic Speed Control Powerful Titan™ 21T reverse rotation motor Portal Axles Rigid Steel Frame Full-time shaft driven 4-wheel drive Tough 6mm stub axles Steel front CV driveshafts Hardened steel rear axle shafts Remote locking steel gear differentials with cable-actuation Steel gear transfer case Innovative Battery Compartments Secondary battery mount over front axle for forward weight bias Two speed high/low range transmission with remote shifting Superior 45° steering angle Front — 3 link with panhard Rear — Triangulated 4 link Pre-assembled heavy-duty rod ends with steel hollow balls 5mm diameter steel link rods with 4mm threaded ends Coilover GTS shocks exclusive to TRX-4 chassis Silver-anodized aluminum bodies Threaded bodies with collars easily adjust ride height Silky smooth damping for the toughest trails O-ring cap seal and dual X-ring shaft seals Shock oil included in kit 1.9” Canyon Trail tires with trail-tuned foam inserts Tough black scale wheels Trail tuned S1 rubber compound 12mm steel hex Tire glue required TQi™ 2.4GHz 4-channel transmitter Patented O-Ring sealed watertight receiver box keeps the micro receiver dry Sealed Ball Bearings Hex hardware with rust-resistant black oxide coating Specifications: Length: 20.57 inches (523mm) Front Track: 9.78 inches (249mm) Rear Track: 9.78 inches (249mm) Ground Clearance: 3.14 inches (80mm) Weight: 6.42lb (2.91kg) Height: 10.47 inches (266mm) Wheelbase: 12.28 inches (312mm) Front Shock Length: 3.54 inches (90mm) Rear Shock Length: 3.54 inches (90mm) Approach Angle: 63.82° Departure Angle: 43.22° Breakover Angle: 58.93° Front Wheels: 1.9 x 1.02 inches (49 x 26mm) Rear Wheels: 1.9 x 1.02 inches (49 x 26mm) Front Tires: 4.64 x 1.89 inches (118 x 48mm) Rear Tires: 4.64 x 1.89 inches (118 x 48mm) Wheel Hex: 12mm Speed Control: XL-5™ HV Motor (electric): Titan® 21T Reverse Rotation Transmission: 2-speed Hi-Lo, Remote Shifting Gear Pitch: 32 Brake Type: Electronic “Hill Hold” Skill Level: 2 Battery Tray: 158.75 L x 47 W x 23/26mm H Includes: Unassembled TRX-4 Chassis Kit TQi™ 2.4GHz 4-channel radio system Steering Servo 3 Sub Micro Servos (2-speed & diff locks) XL-5 HV waterproof ESC Titan® 21T 550 motor Full-color step-by-step assembly manual Needed to Complete: TRX-4 compatible body (313mm wheelbase) (4) AA batteries for transmitter 6 or 7 cell NiMH or 2s or 3s LiPo battery pack with Traxxas High-Current Connector Battery charger Metric hex drivers (1.5mm, 2.0mm, 2.5mm) Basic hand tools (screwdrivers, needle nose pliers) CA glue Safety glasses This product was added to our catalog on May 27, 2022

Read more less

The Samix TRX-4M Brass Hex Adapter are a great option to lower the center of gravity in your mini crawler. Designed for the Traxxas TRX-4M, these are made from CNC machined brass and add 6g down low. Available in multiple offsets to best suite your build. Package includes four wheel hexes.Features: Made from CNC machined brass for a precision fit 7mm thick Direct fit to the Traxxas TRX-4M Black coating to prevent corrosion

Read more less

TRA8140X, Traxxas TRX-4 Complete Long Arm Lift Kit (Blue) The Traxxas TRX-4 Complete Long Arm Lift Kit includes everything you need to properly install a massive lift under your TRX-4 including long-arm links, longer aluminum shocks, taller springs, extended driveshafts, and a revised front servo mount to maintain proper steering geometry. This product was added to our catalog on September 7, 2021

Read more less

82010-4, Traxxas TRX-4 Sport 1/10 Scale Trail Rock Crawler Assembly Kit The Traxxas TRX-4 Sport 1/10 Scale Trail Rock Crawler Assembly Kit combines all the technical capability of a TRX-4, with the flexibility to build it your way, for your terrain and off-road mission. The kit includes everything you need to assemble a complete roller, but allows you to choose your preferred electronics. This is the perfect kit for enthusiasts who want to customize the vehicle with their own choice of electronics. It also includes over $70 of highly detailed scale accessories that are sure to win points. Traxxas makes assembly easy with a full-color assembly guide with step by step instructions.  Features: Unassembled kit Pre-cut clear TRX-4 Sport body Includes over $70 of scale accessories Full color step-by-step assembly manual Portal Axles Steel-gear single speed transmission Aluminum coilover GTS shocks 1.9” Canyon Trail S1 compound tires with trail-tuned foam inserts Rugged black 5-spoke wheels Includes: Expedition Rack with traction boards, shovel, axe, jack, fire extinguisher, and fuel cans (#8120X) LED-ready front grill with lenses (Light kit #8116, sold separately)  LED-ready rear tail gate with lenses (Light kit #8117, sold separately) Snorkel with side mirrors (#8119) Tires and Wheels Needed to Complete: Transmitter & Receiver 1/10 Crawler ESC & Motor High Torque Steering Servo 2S to 3S LiPo Battery (158.75 L x 47 W x 23/26mm H Max) & Charger AA size Batteries for Radio System Paint for Body   Tools for assembly    This product was added to our catalog on April 17, 2021

Read more less