RPM80702, RPM Traxxas Slash 4x4 Front or Rear A-arms (Black)
RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more!
Features:
They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off of each A-arm! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions!
We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over the RPM traditional look with our 30 degree leading and trailing edges, and huge bosses for the shock and sway bar mounts. Additionally, you now have the option of a bit of color with either blue or black to choose from.
RPM A-arms are molded in RPM trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA!
This product was added to our catalog on March 2, 2021
RPM80662, RPM Traxxas X-Maxx Oversized Front Axle Carriers w/Bearings (2)
RPM Traxxas X-Maxx Oversized Front Axle Carriers feature increased durability and larger inner bearings. Stock bearings are a mere 20x27x4mm while the oversized bearings RPM uses are gigantic a 20x32x7mm. This delivers a load rating that is nearly 300% higher than the stock bearings while the static load rating is over 300% higher. That’s triple the strength of the stock inner bearings.
Features:
Replaces stock Traxxas TRA7737
Includes gigantic 20x32x7mm inner bearings
Massive steering support ribs for the strongest possible carriers
Outer bearings not included (Stock bearings are used)
Sold in pairs (1 Left/1 Right)
This product was added to our catalog on May 18, 2021
RPM81732, RPM Traxxas X-Maxx Oversized Rear Axle Carriers
RPM Oversized Rear Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of this beast of a truck. The first being durability - these carriers are designed to handle some serious abuse. RPM Oversized Axle Carriers feature massive support ribs for the strongest possible carriers available.
The other major improvement is larger inner axle bearings. The stock inner bearings are a mere 20x27x4mm. The oversized bearings are gigantic 20x32x7mm bearings! That’s 5mm larger on the diameter and 3mm on the width! That equates to a dynamic load rating that is nearly 300% higher than the stock bearing while the static load rating is over 300% higher! The differences are so dramatic you’ll wonder why these didn’t come stock.
RPM Oversized Rear Axle Carriers are molded in black and backed by the RPM limited lifetime warranty against breakage. You can’t go wrong with RPM parts on your X-Maxx.NOTE: RPM Oversized Rear Axle Carriers replace the stock Traxxas TRA7752 part. Each package is sold as a pair (one left and one right) and includes two inner oversized bearings (one for each side). Outer bearings are stock Traxxas bearings (TRA5106 or TRA5106A) and are not included in this kit.
This product was added to our catalog on December 16, 2021
RPM81465, RPM E-Revo 2.0 Front Right Suspension Arm Set (Blue)
This is the RPM E-Revo 2.0 Front Right Suspension Arm Set, including the front right upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams!
RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!
RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.
Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.
This product was added to our catalog on March 16, 2021
RPM81515, RPM E-Revo 2.0 Front Left Suspension Arm Set (Blue)
This is the RPM E-Revo 2.0 Front Left Suspension Arm Set, including the front left upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams!
RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks.
RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.
Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.
This product was added to our catalog on April 6, 2021
RPM80182, RPM Traxxas Rustler/Stampede Rear A-Arms (Black) (2)
A set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede trucks.
This product was added to our catalog on December 16, 2021
RPM70982, RPM Traxxas Sledge Front Bumper & Skid Plate (Black)
RPM Traxxas Sledge Front Bumper and Skid Plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge is a unique design that works with the Traxxas body mounting mechanism. Traxxas designed the body mounting system to move forward instead of rearward. Because it moves forward by well over 1" (25mm), it severely limits bumper design. However, RPM engineers found a way to incorporate a fully functioning bumper with the Traxxas body mounting system.
RPM eliminated the stock bumper and replaced it with a hinge pin retainer, since realistically, that's all the stock bumper really is. Next, they eliminated the stock skid plate in favor of a wider, longer and more protective skid. Lastly, they bolted a unique bumper to the front of the skid plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge sits below the body, which allows the body mounting system full range of motion, yet the Sledge finally has some tough, RPM front end protection.
NOTES: The RPM Front Bumper and Skid Plate is designed specifically for the Traxxas Sledge and replaces the bumper and skid plate from stock Traxxas (TRA9535).
This product was added to our catalog on January 27, 2023
RPM81670, RPM Traxxas X-Maxx 20x32x7mm Oversized Inner Bearing (2) (RPM81732)
RPM Traxxas X-Maxx Oversized Inner Bearings are replacement bearings for X-Maxx trucks equipped with optional RPM Traxxas X-Maxx Oversized Axle Carriers (RPM81732).
NOTE: These bearings are 20x32x7mm in size and are not compatible with stock Traxxas axle carriers (TRA7752).
This product was added to our catalog on December 16, 2021
RPM81462, RPM E-Revo 2.0 Front Right Suspension Arm Set (Black)
This is the RPM E-Revo 2.0 Front Right Suspension Arm Set, including the front right upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams!
RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks!
RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.
Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.
This product was added to our catalog on December 16, 2021
RPM81512, RPM E-Revo 2.0 Front Left Suspension Arm Set (Black)
This is the RPM E-Revo 2.0 Front Left Suspension Arm Set, including the front left upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams!
RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks.
RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage.
Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole.
This product was added to our catalog on February 6, 2021
