Pre-Orders shipping ASAP! For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer. DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ. BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h.  The 4S version comes with powerful 1504-3600Kv motors, and choose between PNP (No RX)  or ELRS 2.4GHz for your receiver! Check out our other pre-built quads, as well as the rest of our DarwinFPV selection!  Features Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high-cost performance； It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster; The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable; The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash; The independent action camera base can be used with naked GoPro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.   Specifications Brand: DarwinFPV Model: BabyApe Ⅱ 4S Frame: Wide X Wheelbase: 156mm Size: 126mmx150mmx50mm Flight Control: F411 MPU6500 AT7456E Firmware：DARWINF411 Firmware: BETAFPV_Nano_2400_RX The receiver's factory firmware is ELRS_V3.2.0 Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB ESC: Bluejay 48KHz 3-6S 30A Motor:  4S version：1504-3600KV Propeller: HQProp T3.5x2x3GR-PC Weight: 135.4 g (analog version) Receiver: ELRS 2.4GHz Darwin FPV "Cement" Ultra Durable FPV Drone Camera Sensor type：1/3" CMOS Sensor Image：16:9 TV System: NTSC Horizontal Resolution：1200TVL Lens：2.1mm 160° Electronic Shutter: 1/50~1/100000 sec Video Output: CVBS Min. Illumination：0.001Lux wb: automatic DNR: 3D DNR WDR: 100db Input voltage: DC 3.7-24V Working current：80mA@DC12V/170mA@DC5V IP: IP67 Size：19x19mm Weight：7.9g DarwinFPV 25/200/400/600mW VTX Output Power: 25/200/400/600mW(adjustable) Frequency: 5.8Hz 40port Power Supply Voltage Range: 5V Weight: 3.5g Pitch: 28x15mm(length x width) Protocol: SmartAudio Indicator Light Description: Includes 1x DarwinFPV BNF Baby Ape V2 3.5" Analog Micro Quad - 4S - Choose Your Receiver 4x HQProp T3.5x2x3GR-PC 2x Battery cable strip ( 10x170mm) 2x EVA shock pad（thickness：10㎜） 1x Spare screws bag 1x Sticker 1x Manual

Read more less

This Flywoo BNF Explorer LR 4" HD 4S Quad comes with Walksnail Avatar V2 & Avatar Micro Cam V2, giving you buttery smooth and stabilized video performance. The advanced quadcopter technology lets you take your FPV adventures to new heights! Choose your receiver between ELRS 2.4GHz and TBS CRSF 915 Mhz for a secure flight. Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology! This long range quad is a small efficient cruiser with a deadcat design eliminating props in your view, perfect for the elite capabilities of the Walksnail system. Be sure to check out our Bind-n-Fly collection and our Walksnail Compatible Quads and Electronics as well as other great products from Flywoo!  Features Compact and lightweight design, weighing less than 250g even with the battery Long flight time of up to 30 minutes User-friendly controls for easy operation Support 1080P 120fps Recording Latency Average Delay 22ms Walksnail Avatar V2 Kit 8G ( Camera & VTX) Walksnail WS-M181 GPS: Featuring the u-blox M10 platform UBX-M10050 GNSS chipset and BUILT-IN QMC5883 MAG, the module offers stronger performance and more accurate positioning. Specification Model: Explorer LR 4 HD Walksnail Sub250 Micro Long Range Brand: FLYWOO Frame: Explorer LR 4 HD Walksnail Frame kit FC and ESC: Goku Versatile F405 Pro Mini Stack ( F405 FC+ 40A ESC ) VTX & Cam: Walksnail Avatar HD Kit V2 (8G) Propeller: Gemfan Hurricane 4024 2 Antenna: Flywoo Circular Polarized 5.8GHz UFL Antenna - LHCP Motor: NIN 1404 V2 ULTRALIGHT FPV MOTOR Weight: 168.4g Flight Controller Specifications MCU: STM32F405BGA GYRO: ICM42688P UARTS: 1/2/3/4/5/6 I2C: SCL/SDA Barometer: BMP280 BEC: 5V 2A / 10V 2A Blackbox: 16M Input Voltage: 2-6S Firmware: FLYWOOF405PRO Mounting: 20x20mm M3 / 30x30mm M4 ESC Soft: Dshot300/600 ESC Telemetry: Yes LED Controller: BF LED F.Port: Yes RSSI: Yes Buzz: Yes Input: 2~6S Lipo (8.4~25.2V) TVS Protection: Yes  ESC Specifications  Con. Current: 40A Burst Current: 45A  Input Voltage: 2-6S Support: DShot300/600 Current Sensor: YES BEC Output: NO Size: 42x42x4mm Mounting Hole: 20x20mm ( M3) Motor Specifications Kv: 2750Kv Input Voltage: 4-6S Stator diameter: 14mm Stator height: 4mm Bearings: NSK Wire Length: 24AWG 150mm Shaft size: 1.5mm Mounting Screw Pattern: 12x12 mm Weight: 8.7g VTX Specifications Communication Frequency: 5.725-5.850GHz Transmitter Power(EIRP):  FCC<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm 1/O Interface: JST1.0x4(Power in)JST0.8x6(USB) Mounting Holes: 25.5x25.5mm; 20x20mm Dimensions: 33.5x33.5x10.5mm Storage: 8G Recording: 1080p/720p Weight: 17.6g Operating Temperature: -20-40℃ Channels: 8 Wide Power Input: 6V-25.2V Supported FC System: Betaflight; Inav; Fettec; ArduPilot; Kiss OSD: Canvas mode Latency Average delay: 22ms Antenna Connector: U.FL Camera Specifications Model Avatar: V2 camera Image Sensor: 1/3.2-Inch 4Mp 4:3sensor Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility Ratio: 4:3 native /16:9 Lens: 2.1mm FOV: 160° Aperture: F2.0 Shutter: Rolling shutter Min.Illumination: 0.001Lux Weight: 7.2g Dimensions: 19x19x22mm Coaxial Cable: 140mm Prop Specifications Diameter: 4" Pitch: 2.4" Blades: 2 Material: Polycarbonate Disk Diameter: 102.33mm Max Prop Width: 13.38mm Hub Thickness: 5.5mm Shaft Hole: 1.5mm Weight: 1.61g Antenna Specifications  Gain: 2.2dBi  Axial ratio: 1.0 Around Band Width: 5.6Ghz – 6.2GHz  Axial Ratio: Around 1.0 Polarization: LHCP Connector: UFL Weight: 1.6g  Include 1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ Walksnail Avatar V2 & Avatar Micro Cam V2 - Choose Your Receiver 1x Hardware Kit 8x Gemfan 4024-Bi Blade Balck 2x Battery strap 15x180mm 1x Set of screws

Read more less

Pre-Orders shipping ASAP! For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer. DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ. BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h.  The 6S version comes with powerful 1504-2300Kv motors, and choose between PNP (No RX)  or ELRS 2.4GHz for your receiver! Check out our other pre-built quads, as well as the rest of our DarwinFPV selection!  Features Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high cost performance； It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster; The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable; The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash; The independent action camera base can be used with naked gopro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.   Specifications Brand: DarwinFPV Model: BabyApe Ⅱ 6S Frame: Wide X Wheelbase: 156mm Size: 126mmx150mmx50mm Flight Control: F411 MPU6500 AT7456E Firmware： DARWINF411 Firmware: BETAFPV_Nano_2400_RX The receiver's factory firmware is ELRS_V3.2.0 Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB ESC: Bluejay 48KHz 3-6S 30A Motor： 6S version：1504-2300KV Propeller: HQProp T3.5x2x3GR-PC Weight: 135.4 g(analog version) Receiver: ELRS 2.4GHz Darwin FPV "Cement" Ultra Durable FPV Drone Camera Sensor type：1/3" CMOS Sensor Image：16:9 TV System: NTSC Horizontal Resolution：1200TVL Lens：2.1mm 160° Electronic Shutter: 1/50~1/100000 sec Video Output: CVBS Min. Illumination：0.001Lux wb: automatic DNR: 3D DNR WDR: 100db Input voltage: DC 3.7-24V Working current：80mA@DC12V/170mA@DC5V IP: IP67 Size：19x19mm Weight：7.9g DarwinFPV 25/200/400/600mW VTX Output Power: 25/200/400/600mW(adjustable) Frequency: 5.8Hz 40port Power Supply Voltage Range: 5V Weight: 3.5g Pitch: 28x15mm(length x width) Protocol: SmartAudio Indicator Light Description: Includes 1x DarwinFPV BNF Baby Ape V2 3.5" Analog Quad - 6S - Choose Your Receiver 4x HQProp T3.5x2x3GR-PC 2x Battery cable strip ( 10x170mm) 2x EVA shock pad（thickness：10㎜） 1x Spare screws bag 1x Sticker 1x Manual

Read more less

Please note that this version is a kit and does NOT come with an O3 air unit, O3 camera and SanDisk Card. The CineRace is a double duct design, not a simple guard anymore. It can fly as flexibly as a racing drone, and as stable as Cinewhoop. All in all, this is a  drone that can not only race but also capture stable videos and at the same time achieve a super long flight time! A specially designed GM10 Nano V3 GPS module is tailored to fit the CineRace20, providing minimal weight but the ability to search up to 30 satellites. You will see on the front of the quad Flywoo engineer the use of the soft TPU material to mount the camera to prevent the jello effect, by reducing the over all vibrations in the quad. Come see our  Cinewhoop Collection and other great products from Flywoo! We also carry a version with the O3 Air Unit already installed here. Features Almost all parts are injection molded for a more sturdy and durable quad. Very easy to disassemble, only fixed by two aluminum columns Customizable with LEDs GPS up to 30 satellites Innovative duct design Sub250 (even with battery) Specifications Input Voltage: 4S Model: CineRace20 HD DJI O3 2inch (without Air Unit) Brand: FLYWOO Frame: CineRace20 O3 (Different fromCineRace20 V1.2\V2 frame ) Charge connector: XT30 Motor: NIN V2 1203PRO 4850Kv Propeller: D51-5 51mm  Buzzer : 5PCS Active Alarm Buzzer GPS: GOKU GM10 Nano V3 GPS Weight: 139g (without battery) Betaflight Firmware target: FLWO/FLYWOOF405S_AIO(SMT32F405) Recommended Battery:Explorer 450mah 4S ( flight time  5mins ) Explorer 750mah 4S ( flight time  6mins )  GOKU GN F405S 20A AIO Input Voltage: 2-6S Lipo MCU: STM32F405 BGA IMU: ICM42688 OSD: BetaFlight OSD  Blackbox: 16Mb Flash Baro: BMP280 BEC: 5V 6 hardware UARTS (UART1,2,3,4,5,6) Onboard LED：4x WS2812 Support BLHELI_S Support PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600 FPV System Add your own O3 Air Unit Includes 1 x Flywoo CineRace20 HD V2 Neon LED 4S Cinewhoop (without O3 Unit) - PNP 8 x D51-5 props 2 x Battery strap  9x150mm \ 9x200mm 1 x Set of screws 1 x 90° USB Type-C 

Read more less

From the creator of the classic dead cat design for micro long-range, Dave_C FPV. As well as the collaboration with Flywoo, we at RaceDayQuads present you the Flywoo Explorer LR HD. Small, long-range, lightweight, and a DJI O3 FPV Air Unit, now that is a recipe for fun. This quad features the GOKU Versatile F405 Pro Mini Stack, NIN 1404 V2 2750KV Motors, and V3.0 GPS. Want a guide for this drone, well here you go: Drone Guide Check out our other DJI O3 Compatible Quads, and also see our other great products from Flywoo! Features Long-range capabilities up to 10KM (FCC) Newest GOKU MINI GPS V3 for Explorer O3 GPS search up to 30 satellites Plug&Play plug O3 Air unit. Hence there is no need to solder 4K/60fps recording for high-quality footage Latest GOKU MINI GPS V3 for greater accuracy Compact and lightweight design, weighing less than 250g even with the battery Long flight time of up to 30 minutes User-friendly controls for easy operation DJI O3 FPV AIR UNITThe DJI O3 Air Unit integrates DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features state-of-the-art DJI transmission technology enclosed in a lightweight, compact design. See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!GOKU GM10 MINI GPS V3.0The V3.0 GPS allows for up to 30 satellites to be searched, making the rescue function more reliable. Safeguard your cruise flight with a built-in buzzer and up to 5 hours of standby.PRE-TUNED AND PRE-SETUPThis RTF is fully built and test-flown by build technicians at Flywoo.   Specifications FC and ESC : Goku Versatile F405 Pro Mini Stack - F405 FC + 40A ESC Frame: Explorer LR 4 03 (Different from OG Explorer LR frame) Model: Explorer LR 4 HD DJI 03 Propellers: Gemfan 4024 2-Blade Motors: NIN 1404 V2 2750Kv Antenna: DJI 03 antenna VTX: DJI 03 Air Unit Wheelbase: 168mm Camera: DJI 03 Brand: FLYWOO Weight: 168.4g GOKU GN F405 Pro Mini 40A 20x20 Stack GOKU Versatile F405 PRO FC Input Voltage: 2-6S Lipo MCU: STM32F405BGA GYRO: ICM42688P UARTS: 1/2/3/4/5/6 I2C: SCL/SDA Barometer: BMP280 BEC: 5V 2A / 10V 2A Blackbox: 16M Input Voltage: 2-6S Firmware: FLYWOOF405PRO Mounting: 20x20mm M3 / 30x30mm M4 ESC Soft: Dshot300/600 ESC Telemetry: Yes LED Controller: BF LED F.Port: Yes RSSI: Yes Buzz: Yes Input: 2~6S Lipo (8.4~25.2V) TVS Protection: Yes GOKU 406S 8bit 40A ESC Con. Current: 40A Burst Current: 45A Input Voltage: 2-6S Support DShot300/600 Current Sensor: YES BEC Output: NO Size: 42×42×4mm Mounting Hole: 20x20mm ( M3) FPV System VTX: DJI O3 Air Unit (Requires DJI Goggles 2 or DJI FPV Goggles V2) Channels: : Auto mode support Manual mode support: 40 MHz: 1 channel; 20MHz: 3 channels; 10MHz: 3channels Camera: DJI O3 Air Unit Camera VTX Antenna: DJI O3 Air Unit Antenna Includes 1x Flywoo BNF Explorer LR 4" Deadcat HD 4S Quad w/ DJI O3 Air Unit - ELRS 2x Gemfan 4024-2 Black Propellers (Set of 4) 2x Battery Strap 15x180mm 1x Hardware Set

Read more less

The iFlight Nazgul5 V3 6S 5" Freestyle Analog Quad is here! It includes the RaceCam R1 FPV Camera and Nazgul 5" tri-blade props, XING-E Pro 2207 motors, BLITZ F7 Flight Controller, BLITZ 1000mW+ VTX, and the BLITZ E45S 2-6S 45A BLHeli32 4-in-1 ESC. Boasting CNC aluminum camera mount with vibration-reduction silicone for increased protection. Great for freestyling and long-distance shots with your GoPro camera! The Nazgul5 Freestyle quad is a go-to gold standard for freestyle BNFs of great value made by the great people at iFlight.  The Nazgul5 V3 is a 5" freestyle frame is made of super stiff carbon for minimal resonance. + High-quality parts+ Sturdy frame structure+ Generous mounting space+ Optimized for O3 Air Unit+ GoPro camera mount included  Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products! Features XING-E Pro 2207 motors and NAZGUL F5 props 5" version also fits 5.1" style propellers Fits both 30.5x30.5 and 20x20 stacks 5mm arm design for more durability Popular True-X configuration LED illuminated logo TPU crash-guards Easy-Swap arms Specifications Product Name：Nazgul5 V3 6S Analog FC: BLITZ F722 FC ESC: BLITZ E45S 45A 4-IN-1 ESC Video Transmission: BLITZ 1mW+ VTX Frame: 245 ±2 mm wheelbase Motor: XING-E Pro 2207 motors Prop: Nazgul 5 inch propellers Takeoff Weight: Approx. 435g / 660±10g (With 6S 1400mAh Battery) Dimensions (L×W×H): 173×173×34±2 mm Diagonal Distance: 245mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 7.5 mins (No Load with 6S 1400mAh Battery) Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range：-10° to 40° C (14° to 104° F) Antennas: Single Antenna Video Transmission System Product Name: BLITZ Whoop 1mW+ VTX Input voltage: 7V～34V Interface: MMCX Power levels: PIT/25mW/400mW/800mW/1600mW Channels: 40 (including Raceband) Mounting pattern: 30.5x30.5mm/Φ3 Lightweight: 18.9g (excluding antenna) VTX telemetry: IRC Tramp Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight! RC Tramp VTX table values: 25mW/400mW/800mW/1600mW Includes 1x Nazgul5 V3 6S Analog BNF 1x Antennas 2x Battery pads 2x Nazgul F5 Prop(Pairs)

Read more less

Introducing the BOB57, a 6" cinematic long-range quad pre-installed with the all-powerful DJI O3 system for crystal clear image quality. This quad aims to best of 5" and 7", hence the name BOB57. This quad is DJI PNP, meaning it does not come with a receiver, meaning you need to install your receiver.  However, if you have the DJI FPV Remote Controller 2, you can bind to the O3 Air Unit. This quad also comes with a GPS pre-installed, allowing all the marvelous features a GPS allows you. The BOB57 comes with XING2 2506 motors with a rated KV 1500, designed around 6S power.  The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot & videographer Ellis van Jason. The team crafted this cinematic 6-inch drone that ensures agility and flight time while combining the advantages of both 5-inch and 7-inch drones for both cinematic and freestyle flights. Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products  Features Hybrid motor design optimized for  that can be used with both bi-blade and tri-blade 6" propellers. High-end GPS is used to minimize the risk of failure during proximity flights Long backbone with enough space up to fit 3000mAh 6S batteries Solid antenna mount for less oscillations when using long antennas Gladiator shell protects from dust and water droplets ESCs with built-in spike absorbers for more reliability Built-in BEC to directly power a GoPro camera 9-minute flight time with 3000mAh 6S Lipo Front-mounting XT-60 DJI O3 Air Unit VERSATILE BODY The Body is designed to carry small to large batteries for agile or long-range missions. SMART XT60 AND USB-C PLUG The XT60 plug is located in the front to gain more space. With the USB-C plug you can directly power your GoPro/Action Cams. OPTIMIZED MOTOR AND PROPS The Motor is designed for 6inch to give both great performance and efficiency. The prop is specifically optimized for this drone. RELIABILITY The BOB57 comes with a shell that protects against hits, droplets, and dust. It also has a high-quality GPS and components for more reliability, like a spike absorber & extra capacitor. PRE-TUNED AND PRE-SETUP Don't worry about tuning, iFlight did that for you already! A basic PID and Filter tuning were applied for a great flight experience! Links Ellis van Jason Tune Setup Specifications Product Name: BOB57 O3 6S HD BNF FC: BLITZ F722 ESC: BLITZ E55 55A 4-IN-1 ESC Video Transmission: DJI O3 Air Unit Frame: 280mm wheelbase Motor: XING2 2506 motors Prop: GEMFAN 6032-3 propellers Takeoff Weight: Approx. 580 g Dimensions (L×W×H)：226×166×34 mm Max Speed: 180 Km/h (Manual Mode) Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 8 mins (With 6S 1400 no load.) Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: 2 Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass Video Transmission  Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Dimensions (L×W×H): L32.5x W30.5xH 14.5mm Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency: 2.400-2.4835 GHz；5.725-5.850 GHz End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V Audio Transmission: N/A  Includes 1x BOB57 6S HD BNF 2x Antennas 2x Battery pads 2x Prop(Pairs)

Read more less

After our very popular 3-inch Cinematic EVA bumper BumbleBee and Green Hornet CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use.  Our all-new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we're talking about here.  ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all-new 2205 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to its 3inch predecessor which gives a lot more room for a lot more fun. Our GPS-measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch-outs or light freestyle moves.  A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization). Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products! Note: Battery, GoPro, and GoPro mount are NOT included. Check out our other pre-built quads, as well as the rest of our iFlight selection! Features High-performance True-AIO Board Beast Whoop F7 AIO 55A v2.0 to save weight and space T700 Quality Carbon (40% more tensile strength compared to common 3K carbon) Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable) Low Resonance frame construction (Less Jello, more Cinematic footage) Pre-tuned with smooth freestyle settings Butter smooth 2205 3200KV (4S) ProTek35 Prop Guards V2.0 No Props or frame in view! Pre-Tuned & Pre-Setup: Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning were applied for a great flight experience! To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps" Angle-Mode (self-balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess! Please check our linked article on "How to disable Angle-Mode, and activate Acro-Mode" Specifications Beast F7 V2 AIO FC MCU: BGA-STM32F745 Gyro: BMI270 Blackbox: 8Mb Onboard Flash BEC output: 5V 2.5A Barometer: BMP280 Connector: Micro-USB OSD: AT7456E FC Firmware：IFLIGHT_F745_AIO_V2 Mounting pattern: 25.5x25.5mm φ3mm Dimensions: 32.5x32.5mm Weight: 8.5g F7 55A 2-6S ESC Current Sensor: Yes Input: 2-6S LIPO Current scale: 200 Constant: 55A  BLHeli: BLHeli-S Telemetry: no ESC Firmware: BlheliS G-H-30 Mounting pattern: 25.5x25.5mm/Φ3mm Dimensions: 32.5x32.5mm SucceX Mini Force 5.8GHz 600mW VTX Power: PIT/25/200/400mW/600mW Antenna interface: MMCX VTX protocol: IRC Tramp Output 40 channels. Size: 29x29mm Mounting pattern: 20x20Φ3/25x25 mmΦ2 Weight: 4g   Includes 1x ProTek35 Frame 2x Albatross RHCP RP-SMA 5.8g antenna 1x TPU Antenna holder 2x Nazgul 3535 propeller (Set of 4 - Color May Vary) 1x iFlight Lipo Strap 15x150mm (Color May Vary) 1x iFlight Lipo Strap 15x250mm (Color May Vary) 1x GoPro TPU bottom stand black (GoPro Protector not included)

Read more less

Flywoo's Firefly Hex Nano V1.2 is the smallest hexacopter ever designed by Flywoo, weighing in at 74g. It powerfully and stably carries Insta 360go and SMO 4K cameras. The Firefly hex nano is small, flexible, stable, and is full of power and offers unmatched control. Check out our other pre-built quads, as well as other great products from Flywoo! Feature Hexacopter HD system Naked Vista Weighing only 74 grams Built in SMO Power Cable Prebuilt and tested Specifications Weight: 74g Wheelbase: 80mm FC & ESC:【No.C203】GOKU HEX F4 16x16 STACK - ( FC+13A ESC ) ( MPU6000) Frame: Firefly Baby Quad Frame (HD Verison) Motors: Nin V2 1203Pro 5500Kv Props: Gemfan 1636 40mm-4 V2.0 HD digital camera & VTX: Naked RunCam Link & RunCam Wasp Antenna: Atomic 5.8GHz Antenna Length 30mm (LHCP) Battery (Recommended): 4S 450mAh / 4S 300mAh battery (Not including) GOKU HEX GN405 Nano16X16 FC  MCU: STM32F405 BGA IMU: ICM42688P Barometer: DPS310 input voltage： 2-6S Onboard LED：WS2812x4 6 hardware UARTS (UART1,2,3,4,5,6) Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported. Onboard 16Mbytes for Blackbox logging 5V Power Out: 2.0A max 3.3V Power Out: 0.5A max Dimensions: 22x22mm Mounting Holes: 16x16mm Weight: 2.3g Firmware : FLYWOOF405NANO BS13A BLheli_S 2-4S 4in1 lBS20/35A BLheli_S 2-6S 4in1 Weight: 2.5g Mounting Hole: 16x16mm (M3) Support Oneshot, Multishot, DShot150/300/600 Nin V2 Motor Stator Size: 1203 Motor Bolt Pattern: 9x9mm KV: 5500 Wasp Nano HD Camera Dimensions: L18mmxW14mmxH18mm LENS: FOV D:160° H:127° V:92° Resolution: 720P@120fps(4:3) Net Weight: 6g(With Cable) Shutter: Rolling Shutter Coaxial Cable: 80 mm Image Sensor: 1/3" Naked Link Air Unit Input Voltage: 7.4-26.4V@ 4-9W Operating Frequency: 5.725-5.850 GHz Transmitter Power: (EIRP) FCC/SRRC: <30 dBm; CE: <14 dBm Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms Max. Transmission Distance: FCC/SRRC: 4 km; CE: 0.7 km; I/O Interface: Type-C, IPEX, 3-in-1 port, Supported Flight Control System: BetaFlight Operating Temperature Range: 0° to 40° C (32° to 104° F) Includes 1x Flywoo BNF Firefly Hex Nano V1.2 1.6" HD 4S Micro Quad w/ Naked RunCam Link & RunCam Wasp - Choose Receiver 1x Accessories (props, prop guard, RunCam link shell, battery straps, hardware, ect)

Read more less