Pre-Orders shipping ASAP! For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer. DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ. BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h.  The 4S version comes with powerful 1504-3600Kv motors, and choose between PNP (No RX)  or ELRS 2.4GHz for your receiver! Check out our other pre-built quads, as well as the rest of our DarwinFPV selection!  Features Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high-cost performance； It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster; The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable; The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash; The independent action camera base can be used with naked GoPro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.   Specifications Brand: DarwinFPV Model: BabyApe Ⅱ 4S Frame: Wide X Wheelbase: 156mm Size: 126mmx150mmx50mm Flight Control: F411 MPU6500 AT7456E Firmware：DARWINF411 Firmware: BETAFPV_Nano_2400_RX The receiver's factory firmware is ELRS_V3.2.0 Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB ESC: Bluejay 48KHz 3-6S 30A Motor:  4S version：1504-3600KV Propeller: HQProp T3.5x2x3GR-PC Weight: 135.4 g (analog version) Receiver: ELRS 2.4GHz Darwin FPV "Cement" Ultra Durable FPV Drone Camera Sensor type：1/3" CMOS Sensor Image：16:9 TV System: NTSC Horizontal Resolution：1200TVL Lens：2.1mm 160° Electronic Shutter: 1/50~1/100000 sec Video Output: CVBS Min. Illumination：0.001Lux wb: automatic DNR: 3D DNR WDR: 100db Input voltage: DC 3.7-24V Working current：80mA@DC12V/170mA@DC5V IP: IP67 Size：19x19mm Weight：7.9g DarwinFPV 25/200/400/600mW VTX Output Power: 25/200/400/600mW(adjustable) Frequency: 5.8Hz 40port Power Supply Voltage Range: 5V Weight: 3.5g Pitch: 28x15mm(length x width) Protocol: SmartAudio Indicator Light Description: Includes 1x DarwinFPV BNF Baby Ape V2 3.5" Analog Micro Quad - 4S - Choose Your Receiver 4x HQProp T3.5x2x3GR-PC 2x Battery cable strip ( 10x170mm) 2x EVA shock pad（thickness：10㎜） 1x Spare screws bag 1x Sticker 1x Manual

Read more less

Pre-Orders shipping ASAP! For those just starting out with FPV drones and on a budget, BabyApe Ⅱ is a great choice. It builds on the design of the first generation of BabyApe, but with a higher spec and only a small price increase, making it the perfect starter drone for the cost-conscious flyer. DarwinFPV has always been committed to designing cost-effective FPV drone. They have accepted feedback from pilots, solved the problems that pilots are most concerned about, and brought better products to everyone who uses them. Adhering to these beliefs, DarwinFPV brings BabyApe Ⅱ. BabyApe Ⅱ is a 3.5-inch small freestyle FPV drone with a take-off weight of less than 250g that fulfills most countries' regulations. The BabyApe Ⅱ has a more powerful configuration, adopts a more reliable manufacturing process and a new power system, and has a higher level of performance, durability, and power. The flight time can reach 13 minutes, the flight distance is 1.5 kilometers, and the maximum speed is up to 92km/h.  The 6S version comes with powerful 1504-2300Kv motors, and choose between PNP (No RX)  or ELRS 2.4GHz for your receiver! Check out our other pre-built quads, as well as the rest of our DarwinFPV selection!  Features Compared with similar products of other brands, BabyApe Ⅱ only sells for $139.99, which once again perfectly reflects the super high cost performance； It comes with 1504 motors and 3.5-inch propellers, the power is stronger and the response speed is faster; The camera and stack are protected by glue potting, which effectively prevents the risk of damage due to contact with metal particles, fine sand, gravel, weeds or dew, and the entire electronic system is more reliable and durable; The addition of a buzzer and extra LED lights is extremely beneficial for beginners, who frequently confront circumstances such as over-discharge the battery and locating drones due to mistakes that lead the drone to crash; The independent action camera base can be used with naked gopro, thumb camera, etc. to record amazing images during flight at 4K/60 frames.   Specifications Brand: DarwinFPV Model: BabyApe Ⅱ 6S Frame: Wide X Wheelbase: 156mm Size: 126mmx150mmx50mm Flight Control: F411 MPU6500 AT7456E Firmware： DARWINF411 Firmware: BETAFPV_Nano_2400_RX The receiver's factory firmware is ELRS_V3.2.0 Reserved port: 1x SBUS(RX1 reverse)、2x Uarts(1,2)、2x Softserial, 1x I2C、1x RGB、1x Buzzer、1x USER(A15)、1x USB ESC: Bluejay 48KHz 3-6S 30A Motor： 6S version：1504-2300KV Propeller: HQProp T3.5x2x3GR-PC Weight: 135.4 g(analog version) Receiver: ELRS 2.4GHz Darwin FPV "Cement" Ultra Durable FPV Drone Camera Sensor type：1/3" CMOS Sensor Image：16:9 TV System: NTSC Horizontal Resolution：1200TVL Lens：2.1mm 160° Electronic Shutter: 1/50~1/100000 sec Video Output: CVBS Min. Illumination：0.001Lux wb: automatic DNR: 3D DNR WDR: 100db Input voltage: DC 3.7-24V Working current：80mA@DC12V/170mA@DC5V IP: IP67 Size：19x19mm Weight：7.9g DarwinFPV 25/200/400/600mW VTX Output Power: 25/200/400/600mW(adjustable) Frequency: 5.8Hz 40port Power Supply Voltage Range: 5V Weight: 3.5g Pitch: 28x15mm(length x width) Protocol: SmartAudio Indicator Light Description: Includes 1x DarwinFPV BNF Baby Ape V2 3.5" Analog Quad - 6S - Choose Your Receiver 4x HQProp T3.5x2x3GR-PC 2x Battery cable strip ( 10x170mm) 2x EVA shock pad（thickness：10㎜） 1x Spare screws bag 1x Sticker 1x Manual

Read more less

The props for this BNF press fit on and do not screw into the motor (much like many other Whoops & Toothpicks) The only difference between the Baby Ape and Baby Ape Pro versions is the camera. Darwin FPV is coming in hot with this affordable new 3" quad. Finding a good quad at a decent price is almost impossible these days but DarwinFPV has done it with this little ripper! Make sure to check out all of our BNF quads as well as the rest of our DarwinFPV selection! Specifications Motors Input Voltage: 1-3S Stator Size: 11x4mm KV: 4300 AIO MCU: STM32F411 Gyro: MPU6000 BEC: 5V/2A,3.3V Input voltage: 1-3S Lipo Support Receiver: PPM, Ibus, Sbus, Dsmx Black box: NO Barometer: NO Firmware: MATEKF411 Buzzer interface: YES Betaflight OSD: AT7456E Constant current: 15A Peak current: 17A MCU: EFM8BB21F16G(48MHz) Firmware: BLHeli_S Protocol: Dshot600 Mounting: 25.5X25.5 M2 VTX Input Voltage: 7V~24V RF Output Power: 0mW/25mW/100mW/200mW switchable Antenna Connector: U.FL Baby Ape Camera Model: Darwin205 Resolution: 700TVL Lens: 1.8mm Signal System: PAL/NTSC Baby Ape Pro Camera Model: Caddx Ant Image Sensor: 1/3" CMOS Resolution: 1200TVL Signal System: PAL/NTSC Includes 1x DarwinFPV PNP Baby Ape 3" Quad - Plug-N-Play Choose Version

Read more less