The Lollipop V4 is yet another improvement over the previous generation. Higher gain, better durability, and more advanced materials. More variants coming soon!
These are RP-SMA antennas. They're compatible with DJI MMCX Straight and MMCX Elbow to RP-SMA VTX Cables. We carry the standard SMA version as well.
Check out all our VTX antennas and our Foxeer Selection!
Features
Durable Structure
Higher gain than previous versions
High Quality Oxidation Resistant Materials
Specifications
Center Frequency: 5.7GHz
Bandwidth: 5.5-6.0GHz
Polarization: RHCP and LHCP
Gain: 2.6Dbi
Axial Ratio: Close to 1
VSWR: < 1.07 (at center frequency)
Radiation Efficiency: 98%
Shell Material: PC + ABS
Antenna Dimensions: Φ17x23mm
Connection: RP-SMA
Weight: 5g
Includes
2x Foxeer Lollipop V4 5.8GHz Stubby RP-SMA Antenna
The latest 3-inch frame from GEPRC, the CL30 is now officially released.
The CL30 has upgraded the design of the CL25 Cinelog25. It continues the 26.5×26.5mm FC hole position and 20x20mm image transmission hole position. It can be installed with mainstream FC AIOs, DJI Vista modules, and most of the analog VTXs on the market. The 9x9mm motor holes can be installed with 1404-1408 motors, and the power output is strong with 3-inch blades. GEP has improved the shock absorption design of the damping platform to provide a more stable shooting effect. Ultra-light body weight, this 3-inch can carry a GoPro Hero 8 naked camera or an Insta360 Go2 camera can be installed with GoPro camera mount.
GEPRC pursues lighter body weight, a better flying feel, and more extended functions.
Check out all our DJI-compatible frames, electronics, and accessories as well as our whole GEPRC product line!
Specifications
Dimensions: 180x180x38mm (Including the propeller guard）
Frame Style: Cinewhoop
Top plate: 2.0mm
Bottom plate: 2.0mm
Arm Thickness: 3.0mm
Stack Size: 26.5x26.5mm
Motor Mount: 9x9mm
Camera Mount: 14-19mm (Nano and Micro size)
Weight: 62.6g (Including the Prop Guard, and 3D Prints)
Recommendations:
Motor: GEPRC GR 1404 3850Kv Micro Motor
FC/ESC: GEPRC F411 2-6S AIO w/ 35A 4in1 ESC
Prop: HQ Prop T76MM Tri-Blade 3" Cinewhoop Prop 4 Pack
LiPo: RDQ Series 14.8V 4S 650mAh 80C LiPo Micro Battery
Includes
1x Top Plate 2.0mm
1x Arm Plate 3.0mm
1x bottom Plate 2.0mm
2x Knurled nut M2
4x Aluminum Column M2x3.5×25
2x M2x4mm cup head screws
28x M2x6.5mm round head screws
10x M2x8mm round head screws
7x M2x9mm round head screws
4x M2x10mm round head screws
1x M2x12mm cup head screw
4x M2x16mm cup head screws
1x M2 Rivet nut
4x M2 Lock nuts
8x M2 Iron nuts
8x M2 * 6.5mm damping rings
9x damping platform rings
1x 19x19mm Camera Mount
1x VTX Antenna Mount
1x TBS T-shaped Antenna Mount
1x TBS NanoRX Mount
1x Camera Protector
6x 3 in Propeller Guard
1x GoPro Camera Mount
4x EVA Damping Ring of Guards
2x 3M Double Tapes
2x Silicone Pads
2x Landing Pads
1x M15x200mm Battery Strap
1x M15x150mm Battery Strap
1x L-shaped (1.5mm)
The CineLog35 Frame developed by CEPRC for mounting GoPro cameras is now officially released.
CL35 is an improvement on the CL30 Cinelog30 frame. It supports the installation of mainstream AIO FC with 26.5mm x 26.5mm holes. The VTX installation hole is 20mm x 20mm, which can be directly installed with Vista HD image transmission. The propeller guard adopts an integrated design, and the overall structure is firmer. GEP also upgraded the power system and chose a 12mm x 12mm motor hole position. When compared to CL30, the CL35 can install a larger 15-18-20 series motor, with a 3.5-inch propeller, and it has stronger power output. They've improved the damping rings, the shooting effect is more stable and clearer and you can use 3D prints to install the GoPro 8, GoPro 9, and GoPro 10. Or use the base to install a naked GoPro 8, Insta360 GO2, or Caddx Peanut camera.
We pursue lighter body weight, better flying feel, and more extended functions.
Check out all our DJI-compatible frames, electronics, and accessories as well as our whole GEPRC product line!
Specifications
Dimensions: 203x203x42mm (Including the propeller guard)
Frame Style: Cinewhoop
Top plate: 2.5mm
Bottom plate: 2.0mm
Arm Plate: 3.5mm
Stack Size: 26.5mm x 26.5mm
Motor Mount: 12x12mm
Camera Mount: 14-19mm (Nano and Micro)
Weight: 130.7g (with Prop guards, and 3D printed parts included)
Recommended:
Motor: EMAX ECO II 2004 2000Kv Motor
FC/ESC: GEPRC F722 2-6S F7 AIO 2 45A 8-bit ESC
Prop: HQ Prop T90MMX3 Tri-Blade 3.5" Cinewhoop Prop 4 Pack
LiPo: RDQ Series 22.2V 6S 1300mAh 100C LiPo Battery
Includes
1x Top Plate 2.5mm
1x Arm Plate 3.5mm
1x Bottom Plate 2.0mm
2x Propeller guards
1x Power cable combination
1x Screw combination
1x Screwdriver combination
1x 3D Print mountings combination
1x Other Parts
The GEPRC F722 AIO is equipped with an F722 FC and 35A 2S-6S BLS ESC. This AIO stack adopts MCU STM32F722, which gives a powerful performance and higher computing speed. It features 5 full UART ports and can connect more external devices. GEPRC designed a 6-pin connector for the DJI Air Unit, just plug and play.
The BLheili_S 35A ESC can handle 35A continuous current (40A burst), supports 2-6S lipo batteries, and brings the drone a stronger flight performance. Support OSD parameter adjustment, buzzer, led, and other functions. It is 8.8g, ultra-lightweight, and 25.5x25.5mm mounting hole, suitable for most of the frames on the market!
Check out all our whoop flight controllers, and our GEPRC products!
Features
MCU: STM32F722, with strong performance and higher computing speed.
It has 5 full UART ports, which connect more external devices
6-pin connector for DJI Air Unit module, and just plug and play.
The BLheili_S 35A ESC can handle 35A continuous current (40A burst).
Support OSD parameter adjustment, buzzer, led, and other functions.
8.8g ultra-lightweight
25.5x25.5mm mounting hole, suitable for most frames
Specifications
GEPRC F722 AIO
Model Name: GEP-F722-35A AIO
MCU: STM32F722
IMU: BMI270/42688
Firmware target: GEPRC_F722_AIO
OSD: Betaflight OSD w/ AT7456Ev
UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
Beeper: YES
LED: YES
USB: Micro USB
BEC output: 5V@1A
Integrated LC Filter
ESC MCU: 8BB21F16G
Continuous current: 35A
MAX current: 40A (10s)
Input: 2-6S
Supports: Dshot600, Oneshot, Multishot
BlackBox: 16Mb
Target: G_H_30
Size: 32x32mm Board
Installing Hole: 25.5x25.5mm, M2
Weight: 8.8g
Includes
1x GEP-F7-35A AIO
1x XT30-7CM-18AWG Power cables
1x 35V220UF capacitance
1x SH1.0-6Pin to GH1.25-8Pin cables
8x M2*6.5mm Damping ring
We are glad to introduce a new member of GEPRC FC AIO, the GEP-F722-45A AIO. The F722 AIO adopts MCU STM32F722, which has a powerful performance and higher computing speeds. It has 5 full UART ports and can connect more external devices.
We designed a 6-pin connector for the DJI air unit VTX plug-and-play. The BLheili_S 45A ESC can handle 45A continuous current (55A burst), supports the 2-6S lipo battery, and brings the drone a stronger flight performance. It can support OSD parameter adjustment, buzzer, led, and other functions. It is 8.8g, ultra-lightweight, and has a 25.5mm x 25.5mm mounting hole, suitable for most of the frames on the market. GEPRC pursues lighter weight, smaller volume, more functions, and better performance from their flight controllers.
Check out all our whoop flight controllers, and our GEPRC products!
Features
MCU: STM32F722, with strong performance and higher computing speed.
It has 5 full UART ports, which can connect more external devices
Designed with a 6-pin connector for DJI AIR UNIT MODULE, and just plug and play.
The BLheili_S 45A ESC can handle 45A continuous current (55A burst) and supports the 2-6S lipo battery.
Support OSD parameter adjustment, buzzer, led, and other functions.
8g ultra lightweight
25mm x 25.5mm mounting hole, suitable for most frames
Specifications
GEPRC F722 AIO
Model Name: GEP-F722-45A AIO
MCU: STM32F722
IMU: 42688 gyro/accelerometer(SPI)
Firmware target: GEPRC_F722_AIO
OSD: Betaflight OSD w/ AT7456Ev
UART Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5
Beeper: YES
LED: YES
USB: Micro USB
BEC output: 5V@1A
Integrated LC Filter
ESC MCU: 8BB21F16G
Continuous current: 45A
MAX current: 55A (10s)
Input: 2~6S
Supports: Dshot600, Oneshot, Multishot
BlackBox: 16Mb
Target: G_H_30
Size: 32x32mm Board
Mounting Hole: 25.5×25.5mm
Weight: 8.8g
Includes
1 x GEP-F722-45A AIO
1 x XT30-7CM-18AWG Power cables
1 x 35V220UF capacitor
1 x SH1.0-6Pin to GH1.25-8Pin cables
8 x M2*6.5mm Damping rings
The MARK5 frame is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more endurance.
Gopro case available separately.
Check out all out DJI compatible frames, electronics and accessories as well as our whole GEPRC product line!
Features
Aluminum alloy side plates not only look stunning, but reduce weight and add more endurance.
Developed specifically for freestyle with squashed X arm design
The installation hole of VTX is compatible with DJI Air Unit and VISTA, while maintaining the 30.5*30.5 analog VTX installation hole
Unique shock absorbing structure design, less vibrations and resonance
Specially designed independent capacitor and buzzer compartment for better performance and shaking reduction
Specifications
Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm: 5.0mm
FC mounting holes: 30.5mm x 30.5mm
VTX mounting holes: 30.5mm x 30.5mm / 20mm x 20mm
Motor mounting holes: 16mm x 16mm / 19mm x 19mm
Camera installation space: 19-20mm
Suitable propeller size: 5″ propeller
Dimension: 214mm x 168mm x 42mm
Weight: 130.0g
Includes
1 x GepRC Mk5 Pro 5" Frame
1 x Battery strap M15x250mm
2 x Battery strap M20x220mm
2 x Battery Silicone Pads
1 x Set of 3D printings
2 x Action camera mount holder
1 x Set of screws
1 x Set of screwdrivers
1 x Antenna fixed tube
A great HD frame at in a small size, made specifically to carry the Caddx Vista Unit.
Check out our selection of micro frames, DJI compatible frames, electronics and accessories as well as our whole GEPRC product line!
Specifications
Propeller: 2.5inch
Motor to Motor: 125mm
Hole size of motor: 9mm*9mm (suit with 1105/1103/1104/1204/motor)
Hole size of FC: 25.5×25.5mm & 16x16mm
Camera size：14mm*14mm
Weight: 19.7g
Includes
1x GEPRC Phantom HD / Smart HD 2.5" Micro Frame
Introducing GEPRC's take on the best budget stack out there on the market!
GEPRC TAKER F405 BLS 50A STACK is a plug-and-play stack system specially designed for DJI Air Unit. With the STM32F405 chip, ICM42688-P gyroscope, 16M black box and GEP-BLS50A-4IN1 ESC, you can enjoy a smooth and effortless user experience. This stack system connects to the DJI Air Unit with no soldering required, plus the upgraded Type-C USB connector increases the lifespan of the socket and reduces the risk of poor contact. The 9V 2.5A + 5V 3A dual independent BEC ensures a reliable power supply for any external device you might need.
Check out all our 30x30 stacks & combos, as well as the rest of our GEPRC selection.
Features
Use mainstream STM32F405 chip
Equipped with the latest 42688-P gyroscope
16M black box storage
Integrated LC filter
Upgrade type-C USB interface
Directly plugged into the DJI Air Unit
With GEP-BLS50A-4IN1 ESC, the flying feel is silky
A simple and reasonable installation method, the shock absorber can make the gyroscope work very stably
9V 2.5A + 5V 3A dual independent BEC
Specifications
GEP-F405-HD V2 Flight Controller
MCU: STM32F405
IMU: ICM42688-P(SPI)
Air Unit Connection: Direct plugging into DJI Air Unit
Black Box: 16M onboard
USB Connector: Type-C
OSD: BetaFlight OSD w/ AT7456E chip
BEC: 5V,9V dual BEC
Firmware Target: GEPRCF405
Size: 36.8×36.8mm, hole 30.5×30.5mm，φ4mm hole becomes φ3mm after using a silicone shock-absorbing circle.
Input Voltage: 3-6S LiPo
UART: 6
Power Filter: Integrated LC filter
Weight: 7.7g
GEP-BLS50A-4IN1 ESC
Input Voltage: 3-6S Lipo
Galvanometer: Support
Continuous Current: 50A
Burst Current: 55A（5s）
Support Protocol: Oneshot125/Oneshot42/Mulishot modes/Dshot 150/300/600
Size: 42.9×39.7mm, hole30.5×30.5mm，φ4mm hole becomes φ3mm after using the silicone shock-absorbing circle.
Weight:13.7g
Target: G_H_30
Includes
1x Flight Controller
1x ESC
1x Capacitor
1x DJI Air Unit Adapter Cable
1x Flight Controller Adapter Cable
1x XT60 Power cable
4x M3x30 Screws
4x M3x24 Screws
8x Nylon nuts
8x Silicone grommets
2x sh1.0 4pinsilicone cable
1x Camera connection cable
The HGLRC SPECTER F722 Mini 2-6S 20x20 Flight Controller boasts a powerful STM32F722 processor with up to 216 MHz of computing power for more seamless control, improved feel, and fast response times. It also features a high-performance MPU6000 gyroscope with 42688 pads for optimum stability and a 16MB black box for plenty of flight data storage. Plus, bluetooth parameter adjustment with the SpeeyBee APP allows you to adjust serial port, PID and other flight control parameters anytime and anywhere. There's even a 10V electronic switch for hassle-free power-on/off and nano-scale coating on both sides to protect against water, moisture, and corrosion.
Interested in the HGLRC F760 Mini F722 3-6S 20x20 Stack/Combo (F7 FC / G071 32Bit 60A 4in1 ESC) - MPU6000?
Interested in just the HGLRC SPECTER G071 128K 32Bit 60A 3-6S 20x20 4in1 ESC?
Check out all our 20x20 FCs, and all of our HGLRC products!
Specifications
HGLRC SPECTER F722 mini FC
FC Firmware: HGLRC F722 Mini
MCU: STM32F722
Gyro: MPU6000
OSD: AT7456E
Barometer: BMP280
Blackbox 16MB
UARTS:5
Input Voltage: 7.4V-22.8V/2-6S LiPO
BEC: 10V2A/5V2.5A
Size: 37mmx34mmx9.8mm
Mounting: 20x20, M3
Weight: 18g
Includes
1x HGLRC SPECTER F722 mini flight controller
1x 30AWG 25mm double-ended SH1.0-8P cable
1x 30AWG 70mm single-head SH1.0-7P/single-head SH1.0-6P DJI cable
1x 30AWG 70mm single-head SH1.0-7P/single-head GH1.25-6P VTX cable
1x 30AWG 60mm single-head SH1.0-3P/single-head 1.25-3P camera cable
1x 30AWG 100mm single-head SH1.0-4P receiver cable
4x M3x20 hexagon socket screws
The Kakute F4 V2.4 is an 8S Flight Controller that has everything you need, with plug-and-play DJI O3 HD camera, 4in1 ESC ports, barometer, OSD, 5x UARTs, logging & onboard flash storage, plus 5V & 9V/3A BEC. DJI HD ready - just plug it in & the 9V/A regulator will power your HD transmitter, like DJI O3 Air Unit & Caddx Vista. There are LED & buzzer pad, I2C pad (SDA & SCL) for external GPS/Magnetometers
Check out our other 30x30 flight controllers and the rest of our HolyBro selection!
Specifications
MCU: STM32F405
IMU: MPU6000
Barometer: BMP280
OSD: AT7456E
5x UARTs (1,3,4,4,6,7)
128 Mbit Dataflash chip
Battery input voltage: 2-8S
BEC 9V/3A - Optimized for DJI O3 Air unit
BEC 5V/2A
7x PWM Outputs (6 Motor Output, 1 LED)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire, ESLR).
Mounting: 30 x 30mm, Φ4mm hole with M3 Grommets
Dimension: 37x37mm
Weight: 7g
JST-SH1.0_8pin port (For 4in1 ESCs)
JST-SH1.0_6pin port (For DJI/Caddx HD System and other VTX)
Includes
1x Holybro Kakute F4 HD V2.4 2-8S 30x30 Flight Controller - MP6000
1x Wiring Kit
Wiring Diagram
The Kakute F4 V2.4 is ready for DJI HD. Easily plug in and power your HD video transmitter (like DJI O3 Air Unit & Caddx Vista) with its on-board 9V/A regulator, plus 5 dedicated UARTs w/inversion for peripherals. This stack comes with a barometer, plus LED/buzzer pad & I2C for external GPS/Magnetometers. The Tekko32 is the first 4in1 ESC, featuring the powerful F4 MCU @150Mhz, giving you smooth control & fast response, 4~6S & BLHeli32 for 30x30 stack/combo.
Check out all our 30x30 Stacks and the rest of our HolyBro selection!
Features
New and faster F4 MCU @ 150Mhz (compared to F3 @108Mhz & F0 @48Mhz)
PWM Frequency: 16k to 96k
Separate drive & control circuit, this broadens the current capability of the drive circuit while reducing the electrical interference to the control circuit.
Specifications
Holybro Kakute F4 HD V2.4 2-8S 30x30 Flight Controller
MCU: STM32F405
IMU: MPU6000
Barometer: BMP280
OSD: AT7456E
5x UARTs (1,3,4,4,6,7)
128 Mbit Dataflash chip
Battery input voltage: 2-8S
BEC 9V/3A - Optimized for DJI O3 Air unit
BEC 5V/2A
7x PWM Outputs (6 Motor Output, 1 LED)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire, ESLR).
Mounting: 30 x 30mm, Φ4mm hole with M3 Grommets
Dimension: 37x37mm
Weight: 7g
JST-SH1.0_8pin port (For 4in1 ESCs)
JST-SH1.0_6pin port (For DJI/Caddx HD System and other VTX)
Tekko32 F4 4in1 50A ESC
Continuous Current: 50A x4
Burst Current: 60A x4
Supports 4-6S battery
Supports DShot 150/300/600/1200 & MultiShot/OneShot/Proshot/PWM etc.
ESC telemetry Supported
Onboard analog current sensor
No output BEC
BLHeli_32 firmware
1000uf 35v capacitor included (highly recommended for 6s setup)
Amperage meter scale ratio: 120 (V1.9 Version)
Dimensions: 48x37x6mm / Weight: 13.8g
Mounting holes: M4 30.5x30.5mm (M3 grommets included)
Includes
1x Holybro Kakute F4 HD V2.4 4-6S 30x30 Stack/Combo (F405 FC/ 50A F4 32bit 4in1 ESC)
1x Wiring Kit
Wiring Diagram
HQ Prop's new quad-blade props are specifically designed with the DJI Avata in mind.
Check out their 3" quad blade as well!
Check out all our 2" Props, and all our HQProp products!
Specifications
Propeller Diameter: 2.9"
Pitch: 2.5"
Blades: 4
Material: Poly Carbonate
Weight: 2.15g
Hub Diameter : 10.6mm
Hub Thickness: 5.3mm
Shaft: 2.3/2/2.3mm
Adapter Rings: NO
Includes
2x CW DT 2.9X2.5X4 propeller
2x CCW DT 2.9X2.5X4 propeller
HQ Prop's new tri-blade props are specifically designed with the DJI Avata in mind.
Check out their 3" tri-blade as well!
Check out all our 2" Props, and all our HQProp products!
Specifications
Propeller Diameter: 2.9inch
Pitch: 2.7
Blades: 3
Material: Poly Carbonate
Weight: 1.7g
Hub Diameter: 10.6mm
Hub Thickness: 5.3mm
Shaft: 2.3/2/2.3mm
Adapter Rings: NO
Includes
2x CW DT 2.9X2.5X4 propeller
2x CCW DT 2.9X2.5X4 propeller
The new iFlight Blitz Mini F722 E55 2-6S 20x20 Stack/Combo (F722 FC/ 55A 32bit 4in1 ESC) series offers stellar performance at an affordable price. With an F7 processor and high-quality BMI270 gyro, this FC is all you could ever need for daily cruising or even hardcore freestyle and racing! And with these new 55 Amp BLHeli 32 Blitz 4-in-1 ESCs, you can handle even the most amp-hungry motors. On the Bottom of the ESC, for the the version prior it used to have regular MOSFETS, but now with the V1.3 they come with Metal Mosfets!
Check out our other 20x20 Stacks & Combos as well as our entire iFlight selection!
Features
Improved circuit design, better components and lower electrical noise!
DJI HD VTX Connector (Plug-and-Play / No soldering required)
FC indicator LEDs for visual debugging
BLITZ Mini E55 4-IN-1 ESC V1.3 - Metal Mosfets (Jan-28,2023)
Specifications
Blitz Mini F722
Input Voltage: 2-6S
MCU: STM32F722
Gyro: BMI270
Barometer: DPS310
OSD Chip: AT7456
Blackbox: 16MB
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C: SDA / SLA pads
LED: Yes
Beeper: Yes
Firmware Target: IFRC-IFLIGHT_BLITZ_F722
FC Mounting Pattern: 20x20mm
Dimensions: 30.5x27mm
Blitz Mini E55 4in1 ESC (v1.3
Input Voltage: 2-6S
Max. Continuous Current: 55A
Max. Burst Current: 60A
MCU: G071
BEC: No
Current Sensor: Yes
Firmware: BLHeli32
Target: IFLIGHT_BLITZ_G071_01
Mounting Dimensions: 20x20mm/Φ4mm
Dimensions 35x42mm
Weight: 11.3g
Includes
1x iFlight Blitz F7 Mini V1.1 20x20 Flight Controller
1x iFlight Blitz Mini E55 V1.3 32Bit 55A 2-6S 20x20 4in1 ESC
1x Wiring Set
Wiring Diagram
An awesome little AIO from iFlight, Coming with 20A ESCs, DJI ready header for an air unit or Caddx Vista, and a nice open pad layout to get all your peripherals on board!
Browse our Stacks & Combos, and our iFlight gear!
Features
Support 2-4S battery, new upgraded UARTS ports
F411 chip is used with high-performance computing speed, making it smoother during flight.
Specifications
Whoop AIO F4 V1.1 AIO
Size：30.5x30.5mm
Mounting pattern：25.5x25.5mm/φ3mm
Weight: 7.5g
MCU：STM32F411
Gyro：BMI270
Blackbox：8MB
BEC output: 5V 2A
Config：IFLIGHT_F411_PRO.config
INA pad：nR2
Barometer：No
Constant current: 20
Burst Current: 25A
Input：2-4S
Current sensor：yes
BLHeli：BLHeli-S
ESC Telemetry：no
Firmware Target：IFLIGHT_F411_PRO
ESC Firmware: Bluejay Q-H-50
Includes
1x Whoop AIO F4 V1.1 AIO Board× 1
1x Capacitor UPL 35V 470UF × 1
1x XT30 18awg cable
1x Wire harness (plug&play) for DJI Air Unit × 1
4x M2 silicon grommets × 4
4x M2 damping balls x 4
4x M2x8mm Screws x 4
Say goodbye to dirt and grass clogging up your electronics after a crash! This latest frame ensures your flight controller and ESCs stay clean, avoiding any potential failure or shorts. Plus, it's lightweight and with strategic airflow to keep your components cool. The illuminated side panels and 360-degree TPU parts will keep you protected too. Plus, the Deadcat design eliminates props in your footage for pro-grade cinematic shots. With the upgrade of the V2 comes the support for the DJI O3 Air Unit for this frame.
Check out our iFlight selection, as well as all our other 5" frames,
Features
V1 to V2 was upgraded for the DJI O3 HD Air Unit Digital Transmission
Specially Designed Heatsink for DJI O3 Air Unit
New Camera Mount for a wider camera FOV with TPU damping inserts
New Side Panels to perfectly fit the O3 Air Unit in the back
New Dual 5.8G VTX Antenna TPU mount
Latest Nazgul Frame Upgrades for Maximum Protection
Optional Parts to select (not included in frame kit):
New Anti Spark Filter to prevent rapid voltage and current spikes plugging in a battery
Single DJI VTX Antenna TPU to install the original DJI O3 set included antenna.
Specifications
Product Name: Evoque F5 V2 Frame Kit - DeadCat
Frame wheelbase: 223 mm (DeadCat)
Frame Dimension: L190xW136xH36 mm (DeadCat)
Frame Body Dimension: 36mm
Arm Thickness: 6mm
Bottom Plate Thickness: 3mm
Top Plate Thickness: 2mm
Upper Plate Thickness: 3mm
Camera Plate Thickness: 3mm
Max Flight Stack Height: 22mm
Max VTX Height: 23mm
Motor Mounting: 16x16mm
VTX Mounting: 25.5x25.5/Φ1.6mm
Weight: 240grams
Includes
1x iFlight Nazgul Evoque F5D V2 HD O3 Deadcat 5" Freestyle Frame Kit w/ LED Side Plates
1 x O3 Air Unit Heatsink
2 x O3 IPEX to RP-SMA Antenna Pigtails
1 x O3 Dual Antenna TPU
1 x GoPro TPU Base Mount
1 x Screw Bag
4 x TPU Armguard
1 x Front Bumper TPU
1 x Rear Bumper TPU
2 x Anti-slip Battery Pad
2 x Battery Strap (20x250mm)
Say goodbye to dirt and grass clogging up your electronics after a crash! This latest frame ensures your flight controller and ESCs stay clean, avoiding any potential failure or shorts. Plus, it's lightweight and with strategic airflow to keep your components cool. The illuminated side panels and 360-degree TPU parts will keep you protected too. With the upgrade of the V2 comes the support for the DJI O3 Air Unit for this frame.
Check out our iFlight selection, as well as all our other 5" frames,
Features
V1 to V2 was upgraded for the DJI O3 HD Air Unit Digital Transmission
Specially Designed Heatsink for DJI O3 Air Unit
New Camera Mount for a wider camera FOV with TPU damping inserts
New Side Panels to perfectly fit the O3 Air Unit in the back
New Dual 5.8G VTX Antenna TPU mount
Latest Nazgul Frame Upgrades for Maximum Protection
Optional Parts to select (not included in frame kit):
New Anti Spark Filter to prevent rapid voltage and current spikes plugging in a battery
Single DJI VTX Antenna TPU to install the original DJI O3 set included antenna.
Specifications
Product Name: Evoque F5 V2 Frame Kit - Squashed X
Frame wheelbase: 225mm (Squashed X)
Frame Dimension: L258xW199xH25 mm (Squashed X)
Frame Body Dimension: 36mm
Arm Thickness: 6mm
Bottom Plate Thickness: 3mm
Top Plate Thickness: 2mm
Upper Plate Thickness: 3mm
Camera Plate Thickness: 3mm
Max Flight Stack Height: 22mm
Max VTX Height: 23mm
Motor Mounting: 16x16mm
Electronic Mounting: 20x20mm
VTX Mounting: 25.5x25.5/Φ1.6mm
Weight: 240grams
Includes
1x iFlight Nazgul Evoque F5X V2 HD O3 5" Freestyle Frame Kit w/ LED Side Plates
1 x O3 Air Unit Heatsink
2 x O3 IPEX to RP-SMA Antenna Pigtails
1 x O3 Dual Antenna TPU
1 x GoPro TPU Base Mount
1 x Screw Bag
4 x TPU Armguard
1 x Front Bumper TPU
1 x Rear Bumper TPU
2 x Anti-slip Battery Pad
2 x Battery Strap (20x250mm)
Spare replacement cable for use between Succex-D F7 or Succex-D F7 Mini and DJI Air Unit.
Check out the rest of our DJI compatible gear section and all our iFlight products!
Specifications
Length: 90mm (with plugs)
wire length: 80mm
Double-ended 1.25-1.0mm terminal line
Includes
1x iFlight Succex-D to DJI Air Unit Cable
The ImpulseRC Apex EVO 5" HD Freestyle Frame Kit offers the best of frame durability and video performance. Its carbon fiber components provide superior strength and rigidity, while its aluminum and TPU camera mount and HD video isolation parts help ensure high-definition video clarity. For extra protection, the kit includes injection-molded skids and bumpers, plus rubber and velcro battery pads to keep your battery secure. Includes diamond files, battery strap, and more.
Make sure to out our other ImpulseRC 5" Frames, as well as all our ImpulseRC Gear!
Features
New redesigned aluminum camera mount
HD video system isolation
Antenna mounting
Custom arm guard skids
This frame is compatible with the DJI O3 Air Unit
Camera Mount
Included with the Apex EVO is a newly redesigned aluminum camera mount and 3D printed isolation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame.
With the many different HD and analog cameras on the market there is a large variation between models in the distance from the front of the lens to the mounting bolts. To give the camera the best possible protection, whilst also keeping the frame out of shot, it is critical to be able to adjust the position of the camera forwards and backwards within the frame.
By rotating the TPU inserts 180 degrees, as well as alternating between using the upper or lower bolt as the pivot point, the EVO camera mount has 4 possible mounting positions each 2mm apart.
HD Video System Isolation
A major drawback of the some modern HD video systems is that the body of the unit is grounded, this can cause the conductive carbon fiber plates and frame hardware to be grounded too. In an ideal world this is not necessarily a problem, however in the real world it's an accident waiting to happen.
Alongside the required M2 mounting hardware for the Caddx Vista and M1.6 hardware for the DJI O3, we also include a die-cut mylar insulator and custom machined 'cone rivets' from non-conductive POM.
When installed your HD video system, and also the mounting hardware, is electrically isolated from the frame. This solution adds only 0.5g of extra weight compared to other designs using bulky and heavy 3D prints.
Antenna Mounting
Included in every kit is a 3D printed antenna mount for the your HD video system or other similar antennas.
Specification
TPU Color: Black
Motor Bolt Mounting: 12x12mm & 16x16mm
Stack Mounting: 20x20mm, 30x30mm
Bottom Plate: 2.5mm
Arm Thickness: 5.5mm
Weight: 132g
Mid Plate Thickness : 2mm
Top Plate Thickness: 2mm
Key Plate Thickness: 5mm
Includes
1x ImpulseRC Apex EVO 5" HD Freestyle Frame Kit
1x Carbon fiber frame parts
The ApexLR EVO 7" Frame is the ideal companion for exploration and videography that demands extra range. It has special arm geometry for motors not usually found in deadcat-style frames, and a special design that keeps the DJI O3 Air Unit and HD Camera electrically isolated. This EVO version boasts an aluminum camera mount, video isolation, and TPU inserts to fit many HD and analog cameras.
Be sure to check out our 7" frame selection and all our ImpulseRC products!
TENSION BRACES
As prop size increases, the longer arms required cause vibration issues which negatively impact flight performance and video stability. The ApexLR EVO uses a unique tension brace design between the arms to increase stiffness and shift the resonant frequency of the assembly.
Pre-loading the arms in this way allows us to keep vibration to a manageable level while still using 5.5mm thick arms for a 7" prop. The new approach saves 20g in carbon weight alone compared to equivalent 8mm thick arms.
The ApexLR EVO is a variation on the typical 'dead cat' frame which have been modified to keep the front and rear motors aligned, allowing them to maintain the much loved compressed-x geometry in the motor layout.
This ensures the frame remains balanced and flight characteristics are not compromised, unlike the classic 'dead cat' design which moves the rear motors closer to the body and severely impacts handling.
CAMERA MOUNT
Included with the ApexLR EVO is a newly redesigned aluminium camera mount and 3D printed insulation inserts. This keeps the camera firmly locked in place and reduces vibrations, whilst ensuring it is electrically isolated from the frame.
With the many different HD and analog cameras on the market there is a large variation between models in the distance from the front of the lens to the mounting bolts. To give the camera the best possible protection, whilst also keeping the frame out of shot, it is critical to be able to adjust the position of the camera forwards and backwards within the frame.
By rotating the TPU inserts 180 degrees, as well as alternating between using the upper or lower bolt as the pivot point, the EVO camera mount has 4 possible mounting positions each 2mm apart.
HD VIDEO SYSTEM ISOLATION
A major drawback of the some modern HD video systems is that the body of the unit is grounded, this can cause the conductive carbon fiber plates and frame hardware to be grounded too. In an ideal world this is not necessarily a problem, however in the real world it's an accident waiting to happen.
Alongside the required M2 mounting hardware for the Caddx Vista and M1.6 hardware for the DJI O3, impluserc also include a die-cut mylar insulator and custom machined 'cone rivets' from non-conductive POM.
When installed your HD video system, and also the mounting hardware, is electrically isolated from the frame. This solution adds only 0.5g of extra weight compared to other designs using bulky and heavy 3D prints.
ANTENNA MOUNTING
Included in every kit is a 3D printed antenna mount for the your HD video system or other similar antennas.
APEXLR KIT CONTENTS
Carbon fiber frame parts
Hardware and standoffs
Aluminium and TPU camera mount
Mylar and POM HD video isolation parts
HD video antenna mount
Injection molded skids and bumper
Injection molded wire covers
Rubber and velcro battery pads
Diamond files
Battery strap
Specifications
Lower Main: 2mm
Upper Main: 2.5mm
Top: 2mm
Arm Brace: 3.5mm
Arms: 6mm
Arm Braces: 4mm
Motor Mounting Pattern: 16x16,19x19
Stack Mounting: 20x20mm & 30x30mm
VTX Mounting: 20x20mm and 25x25mm
Includes
1x ImpulseRC ApexLR EVO HD O3 Long Range 7" Frame Kit
JHEMCU had a new flight controller aimed at those DJI pilots. This board comes feature-packed and ready for your next build. The 20x20 form factor makes it a perfect fit for nearly any size drone and the 6s capability means that it will be able to keep up with your power needs. The deluxe version supports 16MB black box recording and features a barometer.
Check out our other 20x20 flight controllers, as well as the rest of our JHEMCU selection!
Specifications
Input Voltage: 3-6S LiPo
MCU: STM32F411
Gyro: MPU6000
OSD: Yes
UARTs: 2 Sets
ESC Connections: Yes
Firmware: JHEF411
BEC: 5V 3A, 10V 2A
Current Sensor: Yes
Buzzer: Yes
Barometer: Yes
Black Box: 16MB
DJI Compatible: Yes
Stack Size: 20x20
Dimensions: 27x27xmm
Weight: 4.5g
Includes
1x JHEMCU NOXE F4 V2 Deluxe 3-6S 20x20 Flight Controller
The Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna for DJI Digital HD FPV Goggles V2. A circular polarized antenna specifically designed for the DJI FPV Drone Goggles. Duality antennas provide improved 2.4/5.8Ghz reception in a compact form factor. That's right, this antenna will work on both 2.4GHz or 5.8GHz frequencies!
We also carry these in a 4 pack!
Check out all our DJI compatible gear all our Lumenier products!
The Lumenier Duality Antenna was created in partnership with world-renown antenna designer TrueRC to bring you the first Dual-Band aftermarket antenna designed as a direct replacement and upgrade for your stock DJI antennas found on the DJI Digital HD FPV Goggles V2. The Duality antenna was made from the ground up to be a perfect match for the DJI goggles. Duality antennas are form fitting, low profile, color matching, direct connect RP-SMA, and all this with improved performance.
The Lumenier Duality HD Stubby, like the extremely popular AXII 2 antenna, is both Circular Polarized (LHCP or RHCP) as well as Omni-directional. On top of that, it is also 2 antennas in one being able to effectively function as both a 2.4GHz and a 5.8GHz antenna. The Lumenier Duality has been further customized to be a direct fit for the DJI HD FPV Goggles. The Duality HD Stubby comes with a custom RP-SMA connector designed to directly and securely screw onto the DJI Goggles. No adapters needed! This makes for an ultra-compact and efficient setup since you don’t need to lose any dB with extra adapters.
The DJI FPV Drone has a linear polarization (neither LHCP nor RHCP). This means that either LHCP or RHCP will be an equal upgrade to the stock antennas on the goggles. If you also use the DJI FPV V2 Goggles with the DJI FPV Air Unit (DJI Digital FPV System), you need LHCP antennas assuming you did not swap to RHCP antennas on the Air Unit or Caddx Vista. If you purchase RHCP and use it with the stock DJI Air Unit antennas (LHCP) there will be greatly reduced signal performance. Never cross - polarize RHCP and LHCP.If using DJI V2 Goggles with only Air Units / Caddx Vista, the AXII HD Combo is a better option
Features
Performance Like No Other
The Duality antenna offers full 360 degree coverage with near perfect circularity and up to 2.8dBic gain. Unlike the stock linear antennas the Duality Circular Polarized antennas provide consistent results no matter the orientation of the aircraft or the goggles. Additionally, these antennas have an incredible cross-polarization rejection of up to -30dB.
All this performance means you can fly farther, and more confidently with a solid RF link.
Precision Tuning
Every Duality antenna comes from the factory having been precisely tuned by hand during assembly and QC. The unique "Fin" design on top is not there for only form but also function. These "tuning" fins allow each antenna to be individually and perfectly tuned during production. Good isn't good enough, Lumenier and TrueRC have stepped it up to the next level of precision manufacturing.
Dual-Band Antenna Technology
Designing a single band antenna of such incredible performance is hard enough, but doing this in a dual-band network is near impossible. Until now.
The Duality antenna features one of the most advanced CP Dual-Band networks available today. Not only does it have unrivaled performance but it managed to do this in an ultra-compact, 5g package. Where other antennas make sacrifices to reduce size the Duality antenna's patented design is able to keep all of the benefits while at the same time be incredibly small.
Quality Engineering with High Grade Materials
The Lumenier Duality antennas are produced with high quality, low loss materials. The material is key to a good quality antenna, and even more so when it comes to performance. This technology along with precision manufacturing results in a top of the line receiving antenna. It is designed to work with the DJI HD FPV Goggles for 2.4 and 5.8GHz, and it is capable of receiving signal up to many miles away.
The injection molded polycarbonate case of the Stubby protects the antenna elements allowing for easy, worry-free storage.
Specifications
Gain: 1.7dBic @2.4GHz, 2.8dBic @5.8GHz
Polarization: LHCP or RHCP
Cross-Polar Rejection: -15 to -30dB, (2.2%)
Bandwidth: 2.39GHz-2.52GHz & 5.6GHz-6.1GHz
Radiation Efficiency: 99%
SWR: <=1.5:1
Weight: 5.25g
Dimensions: 23.3mm dia. X 22.0mm height
Connector: RP-SMA
Patented Design: US. Pat. 10,804,618; Can. Pat. 2,968,566; and other pending patents.
Design by and manufactured by
Includes
4x Lumenier Duality HD Stubby 2.4/5.8GHz Dual-Band Antenna LHCP
The Lumenier Micro AXII HD 2 5.8GHz Stubby RP-SMA Antenna for for DJI - LHCP is the new generation of the world's most popular FPV antenna. The Micro AXII 2 has incredible performance just like the full-size AXII antennas but at less than 1/2 the size and weight! Lumenier, in collaboration with renowned FPV antenna designer Hugo of TrueRC, brings you the smallest, lightest, and best-performing FPV antennas in the world. The Micro AXII 2 antenna improves on the original Micro AXII antenna and features a new RF pathway technology (unique hybrid network) improving performance while still being incredibly small and lightweight.
Even though the Micro AXII 2 is both small and lightweight, it does not sacrifice performance. In fact, it outperforms most other antennas in all categories. Precision engineering has given this antenna a near-perfect Cross-Polar Rejection resulting in a true circularity. This means an LHCP Micro AXII antenna rejects nearly 100% of RHCP signals, giving you a crystal clear image free of multi-pathing noise. On top of that, the Micro AXII 2 has a best-in-class max gain of 1.9dBic enabling better range and penetration. It has a wide bandwidth covering the popular FPV 5GHz band from 5.5GHz-6.0GHz, ensuring you have a clear and strong signal no matter which frequency you're on.
The Micro AXII is designed to be extremely durable and put up with the beatings FPV pilots put on their antennas. The entire antenna array is securely protected inside the injection molded outer casing. The outer shell case is made from impact-resistant polycarbonate material, and it is ultra-sonically sealed shut to guard the antenna elements inside.
Check out all our DJI compatible gear and all our Lumenier products!
Features
Ultra-durable injection molded case
High Gain for long range
New and improved look
Improved efficiency
Specifications
Polarization: LHCP
Gain: 1.9dBic
Cross-Polar Rejection: -15 to -30dB (1.9%)
Bandwidth: 5.6GHz-6.0GHz
Radiation Efficiency: 99%
SWR: <=1.5:1
Connector: RP-SMA
Dimensions: 21x12x14mm
Weight: 3.6g
Includes
1x Lumenier Micro AXII HD 2 5.8GHz Stubby RP-SMA Antenna for DJI
The Lumenier Universal Antenna Adapter Kit allows you to upgrade your DJI Goggle 2 experience and improve your FPV performance. Easily swap antennas with the press-in adapter and the connector for the perfect set up. This adapter will give you freedom in connecting any RP-SMA or SMA antenna.
Note: Goggles are not included. Please choose a connector type and be sure to match SMA or RP-SMA to the antenna of your choice.
Check out our other FPV goggles and accessories and all of our DJI products!
Features
Adapt your DJI Goggles to fit RP-SMA or SMA antennas
Easy to install, simply remove stock antennas and press in MCX adapters until you hear them click into place
Injection molded keyed left and right connector housings
Color matched to the Goggles 2, OEM look and feel
Choose an Adapter:
MCX to RP-SMA
MCX to SMA
Specifications
Connector: Choose MCX to RP-SMA or MCX to SMA
Compatibility: DJI Goggles 2
Orientation: Left and Right Adapters
Weight (Full Kit): 6g
Includes
2x Lumenier Universal Antenna Adapter Kit for DJI Goggles 2 - Choose Your Connector
1x Lumenier Universal Adapter for DJI Goggles 2 - Right (Black)
1x Lumenier Universal Adapter for DJI Goggles 2 - Left (Black)
Generic spare replacement lens for the DJI FPV Air Unit's Camera Module. Identical to OEM. Now you can just replace the lens!
We also carry Metal and TPU lens protectors.
Check out the rest of our camera replacement parts, and our DJI compatible frames, electronics & accessories!
Includes
1x M12 Replacement Lens for DJI Camera - 2.1mm
Another feature rich offering from Matek in the 30x30 class. Loaded with features for digital and analog builds. Matek leads the pack when it comes to quality and performance.
Check out our 30x30 Flight Controllers as well as the entire Matek selection!
Features
STM32F405 has 1MB flash which can run ArduPilot/INAV/BetaFlight
InvenSense the 3rd generation IMU ICM42688-P
9-60V(3~12S LiPo) wide input voltage and voltage sense. and a 9~16V BEC for DJI OSD or analog VTX
8motors+3servos in INAV/BF multirotor mixer.
SH1.0_8pin connector for PnP with 2x 4in1 ESC
SH1.0_6pin connector for PnP with HD System(Caddx Vista & Air Unit)
USB pin breakout for connecting to external USB adapter
Specifications
Input Voltage: 3-12S
MCU: STM32F405RGT6
IMU: ICM42688-P
OSD: AT7456E, DJI OSD
Barometer: SPL06-001 (I2C)
Blackbox: 16M-byte Flash memory
UARTs: 6 + 1x Softserial_Tx option
PWM outputs: 12 (8x Dshot)
I2C: Yes
BEC: 5V 1.5A, Vx, 9~16V/1~2A (3S IN/9V 2A, 4S IN/12V 2A, 6S IN/16V 2A, 8S IN/16V 1.5A, 12S IN/16V 1A)
ADC: 4 (VBAT, Current, RSSI, Airspeed)
PINIO: Yes
Dual Analog Camera Cignal Switchable: Yes
Mounting Pattern: 30x30mm
Dimensions 36x36x5mm
Weight: 7g
Includes
1x Matek F405-HDTE Flight Controller
6x Silicon grommets M4 to M3
1x SH1.0_8pin cable 5cm, 2x SH1.0_8pin connectors
1x SH1.0_6pin to GH1.25_8pin cable 8cm for HD System(Caddx Vista & Air Unit)
Wiring Diagram
Another solid choice in the Matek F405-miniTE 20x20 Flight Controller by a company that leads the pack when it comes to quality and performance.
Check out all our 20x20 FCs as well as the entire Matek selection!
Features
F405 has 1MB flash which can run with ArduPilot. even with INAV firmware.
Redesigned target MATEKF405TE support 8x bi-directional DSHOT.
Support DJI air unit PnP, and a 10V BEC for DJI OSD or analog VTX
Compared with F722-miniSE 8motors or 6motor+2servos, F405-miniTE supports 8motors+3servos in INAV/BF multirotor mixer
Convertible 20mm to 30.5mm mounting
Specifications
Input: 6~30V (2~6S LiPo)
MCU: STM32F405RGT6
IMU: ICM42688-P
OSD: AT7456E
Baro: Goertek SPL06-001 (I2C)
Blackbox: 16M-byte Flash memory
UARTs: 6
PWM outputs: 12 (8 Dshot)
I2C: 1
ADC: 4 (VBAT, Current, RSSI, Airspeed)
Current Sensor: No
PINIO: 2
BEC: 5V 1.7A & 10V 1.4A
Mounting Pattern: 20x20 M2/M3, 30X30 M3
Weight: 5g
Includes
1x Matek F405-miniTE 20x20 Flight Controller
1x 20mm to 30mm conversion plate(blue PCB)
6x Silicon grommets M4 to M3
6x Brass grommets M3 to M2
1x SH1.0_8pin cable 5cm (including 2x 8pin connectors) for 4in1 ESC
1x SH1.0_6pin to GH1.25_8pin cable 8cm for DJI Air Unit
Packed with features, the H743-Slim from Matek is ready to go. Compatible with INAV, Betaflight, and ArduPilot.
Check out our 30x30 Flight Controllers as well as the entire Matek selection!
Specifications
FC Specifications
Brand name: Matek Systems
Item name: H743-SLIM Flight Controller
MCU: STM32H743VIH6, 480MHz , 1MB RAM, 2MB Flash
IMU: ICM42688P & ICM42605
Baro: Infineon DPS310 (I2C2)
OSD: AT7456E (SPI2)
Blackbox: MicroSD card socket (SDIO)
7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
13x PWM outputs(including “LED” pad)
2x I2C
1x CAN
6x ADC (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2)
3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
1x SPI3 break0ut
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
1x JST-GH1.25_4pin connector (5V/CAN-H/CAN-L/G)
Dual Camera Inputs switch
5V/Vbat filtered power ON/OFF switch
DJI FPV OSD is supported by any spare UART
Power
Vbat Input: 6~36V (2~8S LiPo)
BEC: 5V 2A cont. (Max.3A)
LDO 3.3V: Max.200mA
No Current Sensor built-in
ADC Vbat2 pad supports Max. 69V (voltage divider: 1K:20K)
Static power: 200mA@5V with Betaflight, 150mA@5V with ArduPilot
FC Firmware
ArduPilot(ChiBiOS): MATEKH743
BetaFlight: MATEKH743
INAV: MATEKH743 (To be supported soon)
Physical
Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
Dimensions: 36 x 36 x 5 mm
Weight: 7g
Includes
1x Matek H743 Slim 30x30 Flight Controller
Wiring Diagram
QA:
ArduPilot Relay(PINIO
Camera-1 and Vsw On by default
Make sure 2 cameras are set with identical video format, both PAL or both NTSC.
# GPIOs
PD10 PINIO1 OUTPUT GPIO(81) //Vsw pad power switch
PD11 PINIO2 OUTPUT GPIO(82) //Camera switch
# RCx_OPTION: RC input option
28 Relay On/Off
34 Relay2 On/Off
35 Relay3 On/Off
36 Relay4 On/Off
e.g.
RELAY_PIN 81 //Vsw GPIO
RC7_OPTION 28 //Relay On/Off, Use CH7 of Transmitter to switch Vsw
RELAY_PIN2 82 //Camera switch GPIO
RC8_OPTION 34 //Relay2 On/Off, Use CH8 of Transmitter to switch camera
or
RELAY_PIN3 81 //Vsw GPIO
RC9_OPTION 35 //Relay3 On/Off, Use CH9 of Transmitter to switch Vsw
RELAY_PIN4 82 //Camera switch GPIO
RC10_OPTION 36 //Relay4 On/Off, Use CH10 of Transmitter to switch camera
The configured feature will be triggered when the auxiliary switch’s pwm value becomes higher than 1800. It will be deactivated when the value falls below 1200.
Check the pwm value sent from the transmitter when the switch is high and low using the Mission Planner’s Initial Setup >> Mandatory Hardware >> Radio Calibration screen. If it does not climb higher than 1800 or lower than 1200, it is best to adjust the servo end points in the transmitter.
Tips
ArduPilot Firmware
https://firmware.ardupilot.org/Plane/stable/MatekH743/
https://firmware.ardupilot.org/Copter/stable/MatekH743/
INAV is expected to support H743 in 2.6.
H743-SLIM has betaflight firmware preloaded for QC
BetaFlight target is not on the Github, pls download BetaFlight firmware from our website.
If you flash ArduPilot firmware via BetaFlight configurator. there is a known issue that flash process will freeze at 50% if “full chip erase” is selected. Disable full chip erase when flashing, then reset to default in Mission Planner after flashing.
It is highly recommended to use STM32CubeProgrammer to erase MCU and upload firmware http://www.mateksys.com/?p=6905
Introducing the smallest HD whoop with the DJI O3 currently on the market. This amazing 75mm quadcopter comes with the elite DJI O3 Air Unit and O3 Micro Cam, and the new BeeBrain BLV4 HD F7 AIO flight controller. Achieve sharper HD capture with amazing quality with O3 Air Unit. Boasting powerful 0804 12000kv dual ball bearings motors, despite its small size, this thing will rip!
Check out our other pre-built quads, as well as the rest of our NewBeeDrone selection.
Explore and film spaces you never could before in HD! A must-have tool for professionals and hobbyists specializing in indoor space.
The only HD Micro whoop board with F7 processor. Dual-bearing motors allow less friction in spinning while 3-blade Azi propellors were developed with engineering theory for optimal air-grab and stability. We master-tuned this drone to have the smoovest flight and absolutely no jello in any videos.
We found the best ratio between the size of drone and its weight distribution. Without DJI O3, the drone can fly up to 8 minutes. Up to 3 minutes with DJI O3 and battery. Choose between 3D printed battery mounts or strap.
We ensure that you get the best material and components that are available so you can rely on the drone without troubleshooting or breaking. All parts are available separately as replacements. Additional flexibility with SLS Nylon prints allow cameras to be changed or updated if needed.
Assembly or tuning not required. Save time and energy so you can focus on your footage. Drone comes with built-in ExpressLRS and ready to pair. Built-in blackbox records data for tuning. Configure to DJI PNP on Betaflight if needed. Don't be afraid of messing up on customization. Reset to factory default (with our tunes and dump files) in one click if something is not right.
Specifications
Drone Size: 75mm
Flight Controller: BeeBrain BLV4 HD F7 Flight Controller ExpressLRS (ELRS) 2.4G
Frame: Cockroach75 Brushless Frame
Motors: Flow 0804 12000kv Double Ball Bearing Brushless Motor
Propellesr: Azi (Tri-Blade) Micro Propellers 40mm - 1.0mm Shaft
HD VTX & Camera: DJI O3 Air Unit
Canopy: NewBeeDrone Acrobee75 HD O3 Canopy
Total Weight without battery: 70.19g
Total Weight with battery: 98.24g
BeeBrain BLV4 HD F7 Flight Controller ELRS2.4G Specifications:
MCU: STM32F745
ESC Firmware: S-H-40 - Bluejay, 0.19.2, 48kHz.
ESC Specifications: 4 channel 12A ESC
ESC Connector: JST-1.0 3Pin
Weight: 6.6 grams (including antennas and battery connector)
Size: Outer dimensions 29 x 29 x 7.6 mm
Holes: 25.5 x 25.5 mm
Battery input: 2S
Connector: XT30
Internal Blackbox: 16MB
Gyro: BMI270
UART1: SBUS on DJI Connector (RX only)
UART2: TX & RX for internal ExpressLRS 3.0 receiver
UART3: TX & RX for DJI MSP+Displayport
Flight time with Tattu 450mAh 2S battery is 3:00min (at 7v)
Firmware:
BeeBrain BLV4 HD Betaflight 4.4.0 firmware with tune
Includes
1x NewBeeDrone BNF AcroBee75 BLV4 2S HD 75mm w/ DJI O3 Air Unit & Micro Cam - ELRS 2.4GHz
NewBeeDrone's DJI O3 AirUnit adapter mount is made of CNC Aluminum, and it can dissipate heat from the O3 Air Unit at the same time provide a strong mounting solution for the Air Unit.
Come see our other adapters and connectors as well as all of our NewBeeDrone Products that we sell at RaceDayQuads!
Specifications
Material: 6061 Aluminum Alloy
Mount to air unit: 25.5x25.5
O3 AirUnit mount screw M1.6 X8mm
Mount to Drone frame: 20x20 M2
Thickness: 3mm
Includes
2x CNC Aluminum Parts
5x M1.6 x 8mm Stainless steel screw Philips head
Premium Controller with Quality Parts and FeaturesFeaturing F4 Processor and 45Amp BLheli32 with NewBeeDrone Smoov-certified hardware design that supports up to 3-6S batteries to provide the best and most reliable quality and performance for either freestyle or racing.
Designed to support the DJI Air Unit.Though DJI Air Unit can only support up to 4S, the Infinity300 Stack can make the DJI Air Unite compatible with 6S batteries by providing a 9V 16W clean power for the DJI Air Unit.
Plug-and-Play. No need to solder tiny wires.The Infinity300 Stack includes a bundle of wires to connect the Flight Controller and ESC and a bundle of wires to connect the Flight Controller to the DJI Air Unit. No need to solder any tiny wires, making it simple and clean to build.
Check out our other flight Controllers and all our NewBeeDrone products!
Specifications
MCU: STM32F405 CPUE @ 168mhz, can be overclocked
IMU: MPU6000
OSD: Betaflight OSD w/ AT7456Ev
UART Ports: 6 UARTS
USB: Micro USB
Input: 3-6S
Installing Hole: 30x30mm M3
Weight: 14g
Includes
1x NewBeeDrone Infinity305 F4 3-6S Flight Controller
4x Grommets short 4x Grommets Long
1x Infinity305 FC to DJI Air module cable 40mm
1x Infinity305 FC to DJI Air module cable 100mm
1x Infinity305 FC to DJI Air module cable 150mm
Wiring Diagram
The ORT Helical 3 Turn 5.8GHz DJI Goggles 2 Antenna 2 Pack provides superior axial ratio performance compared to lower quality circular patch antennas. Its lightweight design makes it perfect for an FPV Goggles setup, and suitable for even the toughest RF environments, like those with buildings and trees that can block signals. Get industry-leading signal strength and penetration with ORT.
Two sets of antennas with MCX male connectors for PNP on your DJI Goggles 2 to replace the default linear antenna. Pull out your default DJI Goggles 2 linear antennas' and plug in this fine tuned LHCP Helical 3 turn for a range boost & better penetration to run with your O3 compatible quads.
Old Radio Transmission, is passionate about antenna’s that’s the reason why their antenna’s work flawlessly. They have tested the Helical 3 Turn whilst flying a whoop, the transition from indoor to outdoor flying was not an issue with these antennas!
Check out all our FPV Receivers & Antennas and all our ORT antennas!
Features
Made in mind for the DJI Googles 2!
Hand Tuned, providing wide beam width with 180 degree coverage and greater penetration through trees and dense material.
High quality Enameled Supreme Wire (anti rust).
Original Low loss RG402 cable.
High quality acrylic, providing premium look.
Effective range, 6~10km and beyond on 600mW Vtx (depends on flying area noise level, receiver sensitivity and FPV setup)
Specifications
Freq Channel: 5300 ~ 6500 MHz
Gain (dBi): 7 dBic
SWR/S11: < 1:1.3
Beam width: 150deg
Polarization: Circularly Polarized – LHCP
Gain Pattern: Directional (needs to be pointed in the general flying area)
Connector: MCX Male (for use with DJI Goggles 2)
Weight: 26.7g ea.
Includes
1x ORT Helical 3 Turn 5.8GHz DJI Goggles 2 Antenna 2 Pack - LHCP - Black
The Quadifier Diamond back DJI O3 is a 5 inch freestyle frame that is designed to be nimble, agile, efficient, and fit a DJI O3 system. I have always been a picky person when deciding on a frame. The Diamond Back is a frame that fit all of my requirements. It has the strength and looks to make your jaw drop. Choose between blue or red for your TPU color on your quad.
Be sure to check out all our 5" frames, and all our Quadifier products!
Features
Designed for 20x20 and 30x30 stacks
Has 20x20 mounting in the back for any HD VTX of your liking
Comes with all mounts required to mount the O3 system
Squish X for smaller size and better gopro shots
5mm arms
Fits micro 19x19 size cameras and the DJI O3 Camera
Specification
Stack Mounting: 30x30, 20x20
FPV Camera Mount: 19mm Micro cam
Motor Mount Pattern: 16x16 or 19x19mm
Main Plate Thickness: 2mm
Frame Shape: True X
Motor to Motor: 230mm
Arm Thickness: 5mm
Frame Weight With TPU: 115g
Includes
1x Quadifier Diamondback HD O3 5" Freestyle Frame Kit - Choose Your Color
1x TPU O3 Kit
The new JBF7 V2 takes everything great about the original JBF7 and adds a few key features that you asked for. Just like the original, it's got an F7 processor, SD card slot for black box logging, and 8 motor outputs. It's got a flexible pad layout that can handle almost any combination of peripherals you could want. Pads are large and heavy--easy for beginners to solder to and reduce the risk of lifted pads. With the new JBF7 V2, we switched to USB-C; we added a VTX pit switch; we added plugs for all of the major features, and we included pre-made plugs for common peripherals, to allow a no-solder or less-solder build for people using those peripherals. We also added small status LEDs for major components, to make troubleshooting easier. For those who like autonomous flight, the board now includes a barometer.
Check out all our 30x30 FCs and the full range of RDQ Products!
If you have any issues accessing the Black Box features please type out this text in the CLI to get black box data to your SD card "set sdcard_detect_inverted=on" press ENTER, then type "save" and press ENTER.
Features
Manual written and feature set selected by Joshua Bardwell.
Board layout focused on flexibility and resilience. You can build what you want, how you want, without stress.
ESC 4-in-1 plug also has solder pads, for troubleshooting, or if you want to direct-solder the ESC.
Plug-and-play support for DJI Air Unit. Voltage regulator allows up to 6S input.
Eight motor pads for easy resource remapping or for that octo cinelifter you're thinking of building.
SD card slot for blackbox logging.
All major functions available in SH plugs, and pre-made wire set included for most common peripherals
USB-C plug
VTX pit switch built-in (9v rail only) allows you to power down the video transmitter using a controller switch
Barometer on board (no iNav target at release date, but possible for the future)
Status LEDs for major components allow easier troubleshooting
9v regulator rated for 3A. Verified to power HDZero Freestyle and DJI VTX.
Joshua Bardwell's Comprehensive Manual
Specifications
Input Voltage: 3-6S LiPo
MCU: STM32F722
Gyro: BMI270
Barometer: DPS310
Power Outputs: 5V 3A, 9V 3A (w/ Pit Switch), 3.3V, vBat
BF Target: JBF7 V2
UARTs: 5 (I2C SDA/SCL shared with UART 3)
Plugs: 4in1 ESC, RX, Analog Cam, HD Cam, VTX, LED/Buzzer
Mounting Pattern: 30.5x30.5mm
Weight: 8.3g (w/ gummies & USB Protector)
Includes
1x RDQ Bardwell F7 V2 3-6S 30x30 Flight Controller - JBF7 V2
1x 4in1 ESC Cable
1x DJI Air Unit / HD Camera Cable
1x Analog Camera Cable
1x Analog VTX Cable
1x LED / Buzzer Cable
1x Receiver Cable
1x USB-C Protector
1x Set of Gummies
Wiring Diagram
For in depth wiring instructions, see Joshua Bardwell's Comprehensive Manual
The perfect mount for the DJI O3 Air unit VTX! Made for RDQ by Chris Booth AKA DobragFPV!Available in tons of colors and will take your build to the next level! This mount doesn't only look cool, It keeps your expensive digital VTX protected and in place, while allowing it to be raised slightly off the carbon creating room for tons of cooling to keep your video crisp all day!
Check out all our 3D printed accessories!
Features
Made for RDQ by Chris Booth AKA DobragFPV!
4x M3 hex nuts needed for 30x30 mounting
4x M2 hex nuts needed for 20x20 mounting
Specifications
Designed to work with DJI O3 Unit
Mount size: 30x30mm 20x20mm
Dimensions: H:20mm L:38mm W:38mm
Includes
1x RDQ DJI O3 Unit 30x30 / 20x20 Mount Adapter - 3D Printed TPU
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.
At last, after so many test iterations, the RDQ FPV Backpack is here! Not too big, not too small, and easily customized, this backpack will serve all types of pilots well. This bag is a feature packed, no-holds premium quality bag at factory-direct prices!
The pack is covered with strong nylon MOLLE webbing across the rear, sides, and even the padded shoulder straps. Each backpack includes 3 buckle straps that can be placed anywhere on the MOLLE webbing to hold your quads and other gear. The webbing is also great for quickly attaching anything with clips, carabiners, or that pile of spare RDQ straps you've got! The main compartment is where your goggles, transmitter, and the removable gear bag are stored. This section has three large configurable wall pieces. One with pockets perfect for Fat Shark batteries and 18650s, another with elastic loops, and a third with an extra deep cutout for your transmitter and TX module antennas to pass through. Three smaller wall pieces allow you to position everything just right.
All the gear in the main compartment is held in place even when the bag is opened upright (thanks to a transparent zippered partition). Opposite the partition are two large transparent zippered pockets. We chose a nylon reinforced material for all pockets so you don't have to worry about props and tools puncturing them. The same reinforced transparent material was used to build the removable gear bag, which is great for batteries or tools. Some testers even used it to hold their goggles. The gear bag has a zippered compartment and a carry loop of its own as well.
The outer compartment has a tool organizer with multiple slot sizes on one side and a large transparent zippered compartment for props on the other. Above the organizer is a hard lined pocket perfect for GoPros, sunglasses and other delicate items. On either side of the backpack are heavy duty expandable pockets big enough for 32oz Nalgene bottles. We replaced the original elastic mesh design in favor of a stronger material that would better allow carrying tripods. There's also a large slot in the rear for up to 17" full size laptops or loads of props!
New version has reworked some of the outmost compartments zippers and pouches.
Check out all our backpacks and cases!
Features & Specifications
MOLLE webbing & 3 adjustable buckle straps
Large configurable 16x12x4.5" main compartment
Transparent zippered partition
Six configurable internal walls with pockets and loops
Removable zippered 11x4x3" gear bag with two compartments
Two 12x6" and one 12x12" transparent zippered pockets
Tool organizer with 1", 2", 3" and 5" slots
Hard lined 7x3x2" sunglass / GoPro compartment
17" Laptop / Tablet / Prop holder
32oz Bottle / Tripod side pockets
Padded 3" wide shoulder straps w/ MOLLE & attachment rings
Padded carry handle
Embroidered RDQ Logo
RDQ Blue interior and exterior trim and zipper pulls
Fits DJI Goggles
Includes
1x RDQ FPV Backpack
All batteries must be shipped by a ground shipping method.
The RDQ Series adds a goggle pack to the ranks! The 2S 3000mAh LiPo with Charge Indicator may be the perfect goggle pack. Higher capacity for more stick time, dual charge/discharge leads for more charging and mounting options, a high quality barrel jack for worry free operation, and not least of all an LED charge indicator allows quick and easy checking of your remaining charge. Thanks to the charge indicator being placed on the underside of the pack, If you mount yours on your goggle strap checking your LiPo is a quick one handed operation. No more guessing or waiting for the alarm. (Or pulling the LiPo out of the strap, in the case of the Tattu goggle pack.)
Check out all our FPV Goggles and Accessories, and well as the entire RDQ Series of LiPos!
Features
LED Power Meter shows your charge level at the press of a button. (It's a momentary switch, not an on/off power toggle.)
Higher capacity than other goggle LiPos, yet still compact. More comfort and more stick time.
High Quality Barrel Jack provides solid connection for uninterrupted power when directly connected to your goggles or with a barrel extension cable like this one from SlayTech.
XT60 discharge lead included for easy charging and to suit strap mounting or pocket carry with your XT60 goggle extension cord like the Skyward Fat Cable or Fat Cable 2.
Perfect for DJI, FatShark, Skyzone, Aomway & other FPV Goggles(anything that takes 2S voltage via XT60 or 5.5x2.1mm barrel.
Goes great with our RDQ Goggle Strap by HotDogFPV!
Specifications
Nominal Voltage: 7.4V
Capacity: 3000mAh
Discharge Rate: 5C
Discharge Lead: XT60 & 5.5x2.1mm Barrel Jack
Balance lead: JST-XH
Dimensions: 72x38x21mm
Weight: ~111g
Includes
1x RDQ Series 7.4V 2S 3000mAh Goggle Battery w/ Charge Indicator
The Runcam Link Wasp HD Camera and VTX Kit is another advanced video transmission module by Runcam and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Runcam Link Wasp HD Camera and VTX Kit is designed for FPV drones and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range of up to 4km. The Link system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience.
User can wirelessly connect their Link Kit to the DJI FPV Remote Controller and DJI FPV Goggles without having to purchase additional receivers.Phoenix HD camera also available separately!Check out all our DJI-compatible gear, and our RunCam selection!Features
Beautiful 1280x720@120fps FPV feed
Excellent low-light performance
Microform factor for better frame compatibility
Specifications
Phoenix Wasp HD Camera
Image Sensor: 1/3”
Resolution: 720p@120fps(4:3)
LENS: FOV D:155° H:125° V:96°
Shutter: Rolling Shutter
Coaxial Cable: 120 mm
Dimensions: L19mmxW19mmxH19mm
Net Weight: 7.5g
Link Air Unit
Input Voltage: 7.4-26.4V@ 4-9W
Operating Frequency: 5.725-5.850 GHz
Transmitter Power: (EIRP) FCC/SRRC: <30 dBm; CE: <14 dBm
Min. Latency (end-to-end): 1280 x 720 60fps: 32 ms
Max. Transmission Distance: FCC/SRRC: 4 km; CE: 0.7 km;
I/O Interface: Type-C, IPEX, 3-in-1 port,
Supported Flight Control System: BetaFlight
Operating Temperature Range: 0° to 40° C (32° to 104° F)
Coaxial Cable: 120 mm
Dimensions: 29x29x13mm
Weight(camera included): 27g
Includes
1x RunCam Link Wasp HD Micro Kit for DJI
1x RunCam Link Air Unit
1x RunCam Link U.FL Antenna
1x 6 Pin Cable - JST-SH1.0
1x 12cm Cable
It is hard finding the right FOV lens for your style of flying and most people overlook 1.8's but believe us, when you combine the Runcam Mini series with this lens, there is something magical that happens. High quality glass along with a mid to low weight makes a great option for clarity and build ease.
Check out the rest of our replacement camera parts and all our RunCam gear!
This lens will work with the following cameras:
Swift 1 & 2 ( Rotor Riot editions included )
Micro Swift 3
Micro Sparrow 2 Pro
DJI FPV Camera
Specifications
Lens
Camera Model
FOV
Horizontal FOV
Vertical FOV
RC18G
MICROSPARROW2PRO-N
165°
129°
97°
MICROSPARROW2PRO-P
160°
125°
92°
SWIFT2 / MICROSWIFT3
180°
139°
104°
Includes
1× RunCam RC18G 1.8mm M12 Replacement Lens for Phoenix, Swift 2, and DJI
The RunCam Wasp Digital FPV Camera is another advanced video transmission camera by RunCam and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The RunCam Wasp is designed for FPV drones and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range of up to 4km!Check out all our DJI-compatible gear, and our RunCam selection!
This listing is for the camera only.
Features
Beautiful 720@120fps FPV feed
Excellent performance
better frame compatibility
Specifications
Image Sensor: 1/3”
Resolution: 720p@120fps(4:3)
LENS: FOV D:155xH:125xV:96
Shutter: Rolling Shutter
Coaxial Cable: 120 mm
Dimensions: L19mmxW19mmxH19mm
Net Weight: 7.5g
Includes
1 x RunCam Link Wasp DJI HD FPV Camera
1 x 120mm MIPI Cable
The Rush Blade F722 is a versatile 30x30 for use in various types of builds. DJI compatibility and plugs all around make this FC an incredibly easy platform to build off of!
Make sure to check out our other 30x30 Flight Controllers and the rest of our Rush FPV products!
Specifications
MCU: 216MHz
GYRO: MPU6000
OSD: Onboard
UARTS: 5
PWM Outputs: 6
Input Voltage: 3-8S
BEC: 5V/5A 10V/3A
Mounting Pattern: 30.5mm x 30.5mm
Includes
1 x Rush FPV Rush Blade F722 30x30 Flight Controller for DJI
2 x 60MM LED/RX Cable
1 x 60MM ESC Cable
1 x 110MM NAVI Cable
1 x 110MM Air Unit Cable
5 x 8MM Grommet
5 x 5MM Grommet
Wiring Diagram
The Creamer is back and better then ever! - Introducing the Creamer 2! - Designed to shed excess weight and bulk but yet be robust enough for the abuse we all put our freestyle frames through. The dual stack mounts allow a versatile and clean build, as do the buzzer and RX pockets in the baseplate.
Be sure to check out all our 5" frames, and all our RotorVillage RVS Products
Features
DJI cam to Micro cam ready (19mm width)
Chamfered edges for days!
Dual Stack setup
30.5mm (single)
20x20mm (front & rear)
AIO Mounting (single)
Rigid true-X air-frame
Extra carbon rails at the front allow it shake off the gnarliest of crashes.
Light weight
Super Low Profile / Low CG
Dual top mount battery straps (cause I hate loosing lipos!)
Removable easy swap arms - remove 1 bolt, loosen 1 bolt
Bling bling gold-coloured hardware
XT60 passthrough in the top plate
DJI O3 compatible (only with M1.6x8mm cap head screws for vista/O3)
3D PARTS ON THINGIVERSE
https://www.thingiverse.com/rotorvillage/designs
Specification
Wheelbase: 5-5.5": 252mm
Carbon Fiber Thickness(Base): 2.5mm
Carbon Fiber Thickness(Mid): 2.5mm
Carbon Fiber Thickness(Top-plate): 2.5mm
Carbon Fiber Thickness(Arms): 6mm
Camera: 19-20mm Camera widths
Camera Skirt: 5mm
Weight: 114.5g (this includes the TPU parts)
Stack mount: 20x20 or 30.5x30.5
Motor mount pattern: 16x16mm ONLY
Includes
RVS Creamer 2 5" Frame Kit
16x Motor Mount Screws
2x LiPo straps
1x TPU Mount kit (FPV cam mounts x2, Immortal-T Mount, SMA antenna mount)
1x Hardware Kit
SkyStarsRC's F722 Mini HD Pro 20x20 Flight Controller, with F7 processor, 6 UARTS, and a 10V 2A Regulator for Caddx Vista or DJI Air Unit! Plus includes Barometer and Blackbox!
Check out all our 20X20 FCs! and our SkystarsRC collection!
Specifications
SkyStarsRC F7 Mini HD Pro 3-6S 20x20 Flight Controller
MCU: STM32F722RGT6 216MHz
IMU(Gyro): BMI270
USB Port: Type-C
Barometer: yes
OSD Chip: AT7456E chip
DJI Air Unit Connection: 6-pin connector and solder pads
Blackbox 16MB
Current Sensor: Supported
Power Input: 3S-6S LiPo
Power Output: 5V 2A & 10V 2A
ESC Signal: M1-M4 available
UART: 6 Sets
I2C: Supported
LED: Supported
Buzzer: Supported
Firmware Target: SKYSTARS F7HDPRO
Mounting: 20x20mm
Dimensions: 31x30x7.8mm
Weight: 6g
INCLUDES:
1 x SkyStarsRC F7 Mini HD Pro 3-6S 20x20 Flight Controller
The SkyStarsRC F7HD PRO4 stack/combo is the perfect choice for those looking for a reliable and powerful flight control system. Featuring an F722 FC and a KM60 AM-32 32Bit 60A 4in1 ESC, this stack is capable of handling 3-6S and can be counted on to provide smooth flying in any situation. Its MPU6000 ensures stable and accurate performance.
This SkyStarsRC F7HD PRO4 F7 3-6S 30x30 Stack/Combo boasts huge soldering pads, proper spacing to avoid solder bridges, ESC connector on top for convenient repairs, TVS diode for reverse-polarity protection, 3A BEC power, pads arranged to minimize wire overlap, and gyroscope independent power supply. With no power lines near MPU6000 Gyro to avoid any EMI interference. Every single unit is pre-tested with quality control. This stack supports a DJI O3 connector and a VTX ON/OFF Pit Switch. INAV and I2C are supported with this stack as well.
Check out our other 30x30 Stacks, and our SkystarsRC collection!
Features
Excellent over-current capability: By adopting the best PCB material and PCB production process. With the application of high TG materials, 3oz copper PCB & 2µm gold deposition process on PCB. Together with the 6-layer layout design of board, compared with other common 4 layers, It can withstand a bigger current.
Extreme stably support 6S LiPo battery: By use of 24 pcs of new Toshiba standard 40V 5x6 Mosfet & imported from USA or Japan electronic materials. Plus advanced lead-free SMT Processing technology. Making the ESC fully able to support a 6S battery and get a better performance.
Excellent heat dissipation performance: The CNC hollow aluminum alloy shell used is great for heat dissipation.
Better control performance: Flashed with the latest AM_32 firmware in factory, support telemetry functions (including voltage, RPMS & current )
Specifications
SKYSTARS F7HD Pro4 Flight controller:
MCU: STM32F722RET6 216MHz
Gyroscope: MPU6000
Baro: Bmp280
OSD: Betaflight SPI OSD DJI HD OSD(UART6)
Black box: 16MB
6x Uarts: UART 1/2/3/4/5/6
4x PWM outputs
1x I2C
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
1x JST-SH1.0_6pin connector (10V/Gnd/TX6/RX6/Gnd/Sbus)
VTX 10V/Vbat filtered power ON/OFF Pit switch
Any spare UART supports DJI FPV OSD
LED: 4 LED independent pads, support WS2812 programming lamp output.
Receiver: Support Sbus, crsf, ibus, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.
Input voltage: 3-6S
BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI O3
LDO 3.3V: Max.250mA
BetaFlight firmware: SKYSTARSF722Pro
INAV firmware: SKYSTARSF722HD
Installation size: 30.5x30.5mm. The installation hole is M4 and supports shock column installation.
External size 39x39mm
Flight control weight: 6.9g
Flight control onboard voltage sensor
AM60 AM_32 60A 32Bit 3-6S 30.5mm 4in1 ESC:
Input voltage: 3-6S LiPo
Con.Current: 60A
Peak Current: 70A≥ 10S
Firmware: AM_32
Support: Dshot 600/1200
Mounting hole: 30.5X30.5 mm/M3
BEC: No
Product size: 41x46x7.6mm
Weight: 18g
Includes
1x SkyStarsRC F722 HD PRO4 3-6S 30x30 Stack/Combo (F722 FC / KM60 AM-32 32Bit 60A 4in1 ESC) - MPU6000
8x Silicon grommets M4 to M3
2x JST-SH1.0_8pin cable, 4cm
1x JST-GH-6P cable for DJI port, 10cm
Wiring Diagram
Discover smooth and stable flight with the SkyStarsRC F722RS Flight Controller. It boasts a 3-6S support & 20x20 mounting. This FC features an MPU6000 sensor that gives you reliable performance. Fly confidently, knowing your controller is up to the task.
Check out all our 20x20 FCs, and our SkyStarsRC collection!
Specifications
MCU: STM32F722RGT6 216MHz
IMU: MPU6000 (SPI)
OSD: Betaflight OSD & DJI HD OSD (UART6)
6 hardware UARTS (UART1,2,3,4,5,6)
Barometer: NO
Buzzer Pad: YES
BEC: 5V 3A
Input Voltage: 3-6S Lipo
Blackbox: 16MB
Firmware: SKYSTARS F7RS
Dimensions: 26x28x7mm
Mounting Holes: Standard 20mm/M3 square to center of holes
Weight: 4.9g
Includes
1x SkyStarsRC F7RS 3-6S 20x20 Flight Controller
The SkyStars Fly Stack features an F722 HD Pro 3 flight controller and a KO45 45A BLHeli_32 4-in-1 128K ESC with a 30x30 mounting pattern!
Features
The ESC has an onboard filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.
Built-in inverter, which can actually be installed in any spare UART.
EMI Shell provides a stronger anti-interference capability.
DJI FPV OSD is supported by any spare UART
VTX 10V/Vbat filtered power ON/OFF switch
Flight control onboard voltage sensor
F722 HD Pro 3 Flight Controller
30x30 Mounting Pattern
KO45 45A 128K ESC
3-6S LiPo Support
Specifications
F722 HD PRO 3 OSD FC
Receiver: Support Sbus, CRSF, IBUS, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a
Installation size: 30.5x30.5mm (The installation hole is M4 and supports shock column installation)
BEC: 5V/10V 3A max dual-channel BEC supports stable power supply on the sky side of DJI
LED: 4 LED independent pads, support WS2812 programming lamp output.
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red) :3
1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
OSD: Betaflight SPI OSD DJI HD OSD(UART6)
BetaFlight firmware: SKYSTARSF722Pro
INAV firmware: SKYSTARSF722HD
MCU: STM32F722RGT6 216MHz
External size: 39x39mm
6x Uarts: UART 1/2/3/4/5/6
USB Type: Type-C (USB2.0)
Flight control weight: 6.9g
LDO 3.3V: Max.250mA
Barometer :Bmp280
Input voltage: 3-6S
Gyroscope: BMI270
Black box: 16MB
PWM outputs: 4
I2C: 1
KO45 45A 4in1 ESC
Support: 128K Dshot1200, Dshot600, Dshot300, Dshot150, Oneshot125, Multishot, PWM control signal
Continuous working current: 45A 60A
Power supply voltage: 3-6S (12-26V)
Moutning Pattern: 30.5x30.5MM
Firmware: BLHELI 32 ESC
5V BEC output: NO
Aperture: 4MM
Weight: 14.6g
Includes
1x SkyStarsRC Fly Stack F7 HD Pro 3 3-6S 30x30 Stack/Combo (F722 FC / KO45 32Bit 45A 4in1 ESC)
1x JST-GH-6P cable for DJI port, 10cm
2x JST-SH1.0_8pin cable, 4cm
8x Silicon grommets M4 to M3
The SkyStars Fly Stack features an F722 HD Pro 3 flight controller and a KM60 60A BLHeli_32 4-in-1 128K ESC with a 30x30 mounting pattern!
Check out our other 30x30 Stacks, and our SkyStarsRC collection!
Features
The ESC has an onboard filter capacitor that suppresses the back electromotive force, stabilizes the battery voltage, and protects the flight control ESC precision components.
Built-in inverter, which can actually be installed in any spare UART.
EMI Shell provides a stronger anti-interference capability.
DJI FPV OSD is supported by any spare UART
VTX 10V/Vbat filtered power ON/OFF switch
Flight control onboard voltage sensor
F722 HD Pro 3 Flight Controller
30x30 Mounting Pattern
KM60 60A 128K ESC
3-6S LiPo Support
Specifications
SkyStarsRC F7HD Pro3 FC
MCU: STM32F722RGT6 216MHz
Gyroscope: BMI270
Baro: Bmp280
OSD: Betaflight SPI OSD DJI HD OSD(UART6)
Black box: 16MB
6x Uarts: UART 1/2/3/4/5/6
4x PWM outputs
1x I2C
3x LEDs for FC STATUS (Blue, Green) and 3.3V indicator(Red)
USB Type-C(USB2.0)
1x JST-SH1.0_8pin connector (Gnd/Vbat/S1/S2/S3/S4/Rx3/Curr)
1x JST-SH1.0_6pin connector (R1/G/R6/T6/G/10V)
VTX 10V/Vbat filtered power ON/OFF switch
DJI FPV OSD is supported by any spare UART
LED: 4 LED independent pads, support WS2812 programming lamp output. Receiver: Support Sbus, CRSF, IBUS, SBUS, XBUS, support 3.3v Spektrum satellite receiver, The default receiver input is UART1(You can solder ELRS RX on UART1), F7 has a built-in inverter, which can actually be installed in any spare UART.
KM60 60A 4in1 ESC
Input voltage: 3-6S LiPo
Con. Current: 60A
Peak Current: 70A≥ 10S
Firmware: BLHeli_32
Support: Dshot 600/1200
Mounting pattern: 30.5mm/M3
BEC: No
Product size: 41x46x7.6mm
Weight: 17g about
Includes
1x SkyStarsRC Fly Stack F7 HD Pro3 3-6S 30x30 Stack/Combo (F722 FC / KM60 32Bit 60A 4in1 ESC)
4x Damping Rubbers (M3x3.5mm)
1x XT60 connector and wires
2x 8pin wiring harness (1x 70mm,1x 50mm)
1x 35v 560uf Capacitor
