Spare replacement Coaxial Cable for the DJI Digital FPV Camera Module and Air Unit. The coaxial cable can be quickly installed to the camera's back cover and the air unit module. Very thin coaxial cable is used with the exposed part wrapped by TPU to improve bending and wear resistance.See all our DJI FPV System Parts & Accessories!
Specifications
Length: 100 mm (without terminal, trailer card and back cover)
Includes
1x DJI FPV Air Unit Coaxial Cable
Set of spare replacement 90 Degree Elbow MMCX Antennas for the DJI Digital FPV Air Unit. LHCP antenna with MMCX joint, which is small and lightweight and ensures a long-distance transmission range and strong anti-interference. Long-distance transmission, small size, lightweight, and durable.
See all our DJI FPV System Parts & Accessories!
Specifications
VSWR<2 frequency range: 5.4GHz-6GHz, 2.75dB gain and 3dB axial ratio beamwidth at 5.8GHz
Size: 12.7 × 12.7 × 80 mm
Weight: 3.9 g
Tips
Keep the antennas of the air unit at least 40 mm apart.
Keep the air unit away from metal objects or carbon fiber frames. Make sure to choose a position where the transmission will not be blocked during flight.
The DJI FPV Air Unit is equipped with MMCX antenna ports. Since the port (the inner pin) is small, when pulling out the antenna, please hold the air unit with one hand, press the two ends of the antenna with the other hand, and remove it horizontally.
Please note that dragging the antenna directly may cause the inner pin and the collar to fall off or get damaged.
Includes
2x DJI FPV Air Unit Antenna - Elbow MMCX
*Please note that the DJI package is labelled SMA but the cable has an RP-SMA connector.
Pair of spare replacement Straight MMCX to RP-SMA Cables for the DJI Digital FPV Air Unit. Allows connection of DJI Digital FPV Air Unit SMA Antennas.
We also carry Straight MMCX to RP-SMA Cables. See all our DJI FPV System Parts & Accessories!
Specifications
Length: 83mm
Includes
2x DJI FPV Air Unit MMCX Elbow to RP-SMA Cable
*Please note that the DJI package is labelled SMA but the cable has an RP-SMA connector.
Pair of spare replacement Straight MMCX to RP-SMA Cables for the DJI Digital FPV Air Unit. Allows connection of DJI Digital FPV Air Unit SMA Antennas.
We also carry 90 Degree Elbow MMCX to RP-SMA Cables. See all our DJI FPV System Parts & Accessories!
Specifications
Length: 83mm
Includes
2x DJI FPV Air Unit MMCX Straight to RP-SMA Cable
*Please note that the DJI package is labelled SMA but the antenna has an RP-SMA connector.
Set of spare replacement RP-SMA antennas for the DJI Digital FPV Air Unit. LHCP antenna, long-distance transmission, strong anti-interference ability, SMA joint, small size, and light weight. Long-distance transmission, small size, lightweight, and durable.
These require RP-SMA to MMCX (Straight or Elbow) adapters to connector to the Air Unit.See all our DJI FPV System Parts & Accessories!
Specifications
VSWR<2 frequency range: 5.4GHz-6GHz, 2 dB gain and 3dB axial ratio beamwidth at 5.8GHz
Connector: RP-SMA
Size: 12.7 × 12.7 × 55 mm
Weight: 6 g
Tips
Keep the antennas of the air unit at least 40 mm apart.
Keep the air unit away from metal objects or carbon fiber frames. Make sure to choose a position where the transmission will not be blocked during flight.
Includes
2x DJI FPV Air Unit Antenna - RP-SMA
Spare replacement power cable for for the DJI FPV Goggles. XT60 to DC power cable connects the DJI FPV Goggles to the battery.See all our DJI FPV System Parts & Accessories!
Specifications
Length: 1.25 m
Includes
1x DJI FPV Goggles Power Cable
At last! The new DJI foam has arrived!The DJI FPV Goggles Sponge Foam Padding is a thicker and softer option for users, improving comfort and effectively blocking light.
The sponge foam padding is thinner than our PU foam padding. If you are nearsighted, we strongly suggest you use it with the DJI FPV Goggles Corrective Lenses.See all our DJI FPV System Parts & Accessories!
Features
Thick, soft material improves comfort.
Effective in blocking light.
Specifications
Material: High-Density Foam (black)
Includes
1x DJI FPV Goggles Sponge Foam Padding
Charge up to three DJI FPV Intelligent Flight Batteries with this handy charging hub!
Requires the DJI FPV AC Power Adapter to use.
Batteries not included
Check out the DJI FPV Drone and Accessories Products and the DJI FPV System product line!
Specifications
Charging Temperature: 5° to 40 °C (41° to 104° F)
Input: 25.2 V, 3.57 A
Charging Time: About 55 minutes (subject to temperature)
Includes
1x DJI FPV Battery Charging Hub
The DJI FPV Car Charger can be used to charge the DJI FPV Intelligent Flight Battery through a car's power socket. Overheating protection will automatically cut off charging if the accessory port exceeds a certain temperature.
Compatible with the DJI FPV Battery Charging Hub
Check out the DJI FPV Drone and Accessories Products and the DJI FPV System product line!
Specifications
Charging temperature: 5°C to 40°C (41° to 104° F)
Input voltage: 14.0 V
DC output : 25.2 V 3.4 A or 25.2 V 0.8 A
Charging time (for a single battery): approx. 50 minutes
Includes
1x DJI FPV Car Charger
Prop guards for the DJI FPV Drone, easy to install and remove.
Check out the DJI FPV Drone and Accessories Products and the DJI FPV System product line!
Includes
1x DJI FPV Drone Propeller Guards
All products with batteries must be shipped by a ground shipping method.
This battery was designed specifically for the DJI FPV Goggles V2, on a full charge, it can power 110 minutes of FPV immersion!
The built-in charge indicator will keep you up to date on the battery's charge, no tester required.
Check out the DJI FPV System product line!
Specifications
DJI FPV Goggles Battery Capacity: 1800mAh
Voltage: 9 V (Max.)
Type: LIPO 2s
Charging Temperature: 0°C to 45°C
Energy: 18 Wh
Max Charging Power 10 W
Battery Life: Approx. 110 minutes (measured in an environment of 25°C at maximum brightness level)
Includes
1x DJI FPV Goggles V2 Battery
For DJI Goggles 2 and Integra is an upgrade from the original foam, providing optimal comfort for any flight experience. Featuring a new and improved open nose area and thicker foam for increased fitment, this foam also ensures that no light leakage occurs. For the ultimate flight experience, the Comfyfoam is the perfect choice.
Note: This foam is meant for the DJI Goggle 2 and DJI Integra.
Check out our other FPV goggles and accessories!
Specifications
Compatible with DJI Goggles 2 and DJI Integra Goggles.
Weight: 5.6g
Includes
1x DJI Goggles 2 and Integra Super Comfy Foam Padding - Ultimate Version
This soft goggle foam will make your DJI goggles feel like a cloud on your face. They provide increased comfort, and can also help fix light leak issues. Help protect your goggles with the included cover.
The installation is simple and convenient, and the overall structure of the optimized design (the plastic bottom frame is removed, and Goggles 2 is designed with a hard plastic bottom frame to cause facial tenderness) uses skin-friendly soft materials to reduce the tenderness on both sides of the forehead when wearing. The forehead of the mask is widened and raised, and the lower cheek is thickened and raised, which improves the stability and comfort of wearing, and effectively prevents light leakage. The skin-friendly mesh fabric used in the mask is more coordinated with Goggles 2 glasses.
Check out all FPV Goggles & Accessories our DJI compatible gear!
Features
Breathable fabric-covered foam absorbs sweat and lets air circulate
Skin-friendly micro-porous synthetic fabric has an anti-allergen effect
The design of the soft pad helps eliminate light leakage
Includes
1x DJI Goggles 2 Foam Pad and Cover
This soft goggle foam will make your DJI goggles feel like a cloud on your face. They provide increased comfort, and can also help fix light leak issues. Help protect your goggles with the included cover.
The installation is simple and convenient, and the overall structure of the optimized design (the plastic bottom frame is removed, and Goggles 2 is designed with a hard plastic bottom frame to cause facial tenderness) uses skin-friendly soft materials to reduce the tenderness on both sides of the forehead when wearing. The forehead of the mask is widened and raised, and the lower cheek is thickened and raised, which improves the stability and comfort of wearing, and effectively prevents light leakage. The skin-friendly mesh fabric used in the mask is more coordinated with Goggles 2 glasses.
Check out all FPV Goggles & Accessories our DJI compatible gear!
Features
Breathable fabric-covered foam absorbs sweat and lets air circulate
Skin-friendly micro-porous synthetic fabric has an anti-allergen effect
The design of the soft pad helps eliminate light leakage
Includes
1x DJI Goggles 2 Foam Pad and Cover
Check out this FPV strap meant for your DJI Goggles 2, this strap uses velcro and elastic straps, making it easy to adjust its length and assemble and disassemble.
Note: This strap is meant for the DJI Goggle 2
Check out our other FPV goggles and accessories!
Specifications
Compatibility: DJI Goggles 2
Material: Velcro, elastic loop fabric, polyester
Weight: 35.4g
Includes
1x DJI Goggles 2 FPV Goggle Strap - Black
Check out lycra foam padding for the DJI Goggle 2, which provides comfort and light protection for all-day use. Improve your fit with this simple DJI Goggles 2 upgrade!
Note: This foam is meant for the DJI Goggle 2
Check out our other FPV goggles and accessories!
Features
Skin-friendly interior material
Durable Lycra foam
Thick, soft material improves comfort.
Effective in blocking light.
Specifications
Compatibility: DJI Goggles 2
Material: Lycra Foam
Includes
1x DJI Goggles 2 Lycra Foam Padding - Black
20x Sticky Pads
Introducing the Goggles 2 Replacement Sponge Foam Padding, a comfortable and highly elastic sponge designed specifically for DJI Goggles 2 users. An innovative design includes an increased height of the sponge on both sides, effectively eliminating the problem of side light leakage. The high compressibility of the sponge ensures the optimal distance between the lens and the eyes, resulting in clear images and text. The sponge's increased height at the bottom also provides ample space for the nose, distributing the weight of the goggles evenly across the face instead of the nose.
Check out our other FPV goggles and accessories!
Features
Skin-friendly interior material
Specifications
Compatibility: DJI Goggles 2
Includes
1x DJI Goggles 2 Max Comfort Sponge Foam Padding - Grey
This Sponge Foam Padding for the DJI Goggle 2 provides comfort and light protection for all-day use. The skin-friendly mesh fabric liner and durable sponge foam material are durable and lightweight. Improve your fit with this simple DJI Goggles 2 upgrade!
Check out our other FPV goggles and accessories!
Features
Skin-friendly interior material
Durable sponge foam
Black in color
Specifications
Dimensions: 7.2 x 2.9 x 1.35 inches
Compatibility: DJI Goggles 2
Weight: .03
Includes
1x Sponge Foam Padding for DJI Goggles 2
10x Sticky Pads
The DJI O3 Air Unit 3-in-1 Cable can be quickly connected to the air unit, and the power cable and signal cable are in different colors.
Be sure to check out our DJI Collection for all your DJI Air Unit needs!
Specification
Length: 100mm
Includes
1x DJI 03 Air Unit 3-in-1 Cable
Dual-band dual-polarized antenna with strong anti-interference ability and long-distance transmission capability. Equipped with I-PEX connector, small, and lightweight.
Be sure to check out our DJI Collection for all your DJI Air Unit needs!
Specification
Weight: Approx. 3g
Length: 85mm
Includes
1x DJI 03 Air Unit Antenna
DJI O3 Air Unit - Go the Distance
State-of-the-art DJI transmission technology enclosed in a lightweight, compact design? See for yourself that it's possible! The DJI O3 Air Unit will provide you with excellent image quality over long distances and is distinguished by ultra-low latency, thanks to which you will take your FPV experience to a whole new level. The device is a real breakthrough in imaging performance - it offers a 1/1.7-inch sensor, flagship video technology, 155° super-wide field of view, and more. It is also distinguished by its compatibility with a wide range of products. Get a reliable image transmission tool, unleash your creativity and enjoy even more sky-high travels!
Enjoy flagship video streaming
Get powerful video transmission capabilities - The DJI O3 Air Unit supports DJI's flagship O3+ technology. This allows you to control the drone while enjoying the shortest response time and clear, sharp live feed. The device also has built-in 2T2R Omni-directional antennas, which guarantee greater stability and smoother transmission. Set off on your next adventure in the skies and experience an unforgettable experience!
See Even More
Get an even clearer and smoother live view. The DJI O3 Air Unit can stream video at resolutions up to 1080p, offering frame rates up to 100FPS. H.265 codec. The result is fantastic image quality. With the DJI O3 Air Unit, you will discover a new dimension of sky travel and provide yourself with an unforgettable experience!
Built-in 1080p micro OLED screens
Get even more realism on your next flight. DJI Goggles 2 are equipped with two HD micro OLED screens, which are distinguished by a refresh rate of up to 100Hz and guarantee incredible clarity. Thanks to this, you will feel as if you are actually looking at the world from under the clouds!
Create even greater images
Be amazed by the improved performance of the DJI O3 Air Unit. The camera module of the device offers 20 GB of built-in memory and is equipped with a 1/1.7-inch matrix. As a result, you can enjoy excellent picture quality and incredible detail Thanks to the solutions used, you can easily record a stable 4K/60FPS movie, and the super-wide 155° field of view will allow you to fit much more in the frame! The module is also distinguished by its f/2.8 aperture and 12.7mm equivalent focal length. Check what else will surprise you!
Enter the world of colors
Vivid, natural colors? Find out how easy it is! Try the D-Cinelike mode and gain more freedom when color grading in post-production. However, the possibilities don't end there! The DJI O3 Air Unit camera module is perfect for use with DJI Avata ND filters (ND8/16/32), which are made of the highest quality materials and allow flexible aperture control. They also allow hassle-free exposure selection. All this translates into natural, faithfully reproduced colors and an interesting contrast between light and shadow.
Customize it
The DJI O3 Air Unit features a lightweight, compact design and wide compatibility. This means that you will successfully use it in various configurations. In combination with the DJI Goggles 2 and the DJI FPV Remote Controller 2 apparatus will provide you with complete mobility and freedom! Moreover, the device supports Canvas mode. This allows you to customize the information displayed on the DJI Goggles 2 or DJI FPV Goggles V2 screens. Set the PID parameters and configure the system to best suit your habits!
Say goodbye to limitations - compatibility with various DJI devices
Get more opportunities. The DJI O3 Air Unit is compatible with the DJI FPV Goggles V2, which offers O3 video transmission, high resolution, long-range, high noise immunity, and low latency. It also works with DJI Goggles 2, which are distinguished by a lighter, smaller design and have built-in micro-OLED screens. The device also works in conjunction with the DJI FPV Remote Controller 2, which is ergonomically shaped, equipped with Hall effect sticks, and allows you to use the M mode that allows you to perform even extremely complex maneuvers.
Features:
DJI O3+ Flagship Transmission: Transform your video transmission experience. It supports a max video transmission quality of 1080p/100fps from up to 10 km.
Next-Level Imaging Performance: Equipped with a 1/1.7-inch sensor, the DJI O3 Air Unit can shoot 4K/60fps video with a 155° super-wide FOV, giving you richer image details. It also comes with 20GB of built-in storage. D-Cinelike color mode allows you to make detailed color adjustments to your shots. The camera module can be used with the DJI Avata ND Filters Set (ND8/16/32).
Canvas Mode: Canvas Mode lets you customize the OSD information on the screens of DJI Goggles 2 or DJI FPV Goggles V2, and adjust PID parameters.
Compact and Richly Compatible: Packed with richer compatibility in a lightweight body. DJI Goggles 2 and DJI FPV Remote Controller 2 are also smaller in size.
Integrating DJI's cutting-edge video transmission technology into a lightweight and compact body, the DJI O3 Air Unit features excellent video transmission quality with high definition, low latency, and long distances. It comes with a 1/1.7-inch sensor, a 155° super-wide FOV, and rich compatibility, providing a powerful video transmission solution for your assembled aircraft.
Specifications:
Camera:
Matrix: 1/1.7" CMOS Effective Pixels: 48MP
Lens: Field of View (FOV): 155° Equivalent Focal Length: 12.7mm Focal Length: 2.34mm Aperture: f/2.8 Focus Mode: FF Focus Range: 0.6m to ∞.
ISO range: 100-6400 (Auto) 100-25600 (Manual)
Snapshot: Roll Shutter
Field of View (FOV): 155°
Video resolution:
With DJI Goggles 2: 4K @ 50/60FPS 2.7K @ 50/60/100FPS 1080p @ 50/60/100FPS
With DJI FPV Goggles V2: 4K @ 50/60FPS 2.7K @ 50/60/100/120FPS @ 1080p 50/60/100/120FPS
Video Format: MP4
Electronic Image Stabilization (EIS): The product supports RockSteady technology.
Weight: 8.3g (including coaxial cable)
Air Unit Module:
Weight:
Air Unit (without Camera Unit): Approx. 28g
Air Unit (including Camera Unit): Approx. 36.4g
Antenna: Approx. 3g
Dimensions (L x W x H):
Transmission module: 32.5 x 30.5 x 14.5mm (L x W x H)
Camera module: 21.2 x 20 x 19.5mm (L x W x H)
Coaxial cable: 115mm (length )
3-in-1 cable: 100mm (length)
Antenna: 85mm (length)
Communication frequency:
2.400-2.4835 GHz (RX only)
5.725-5.850 GHz (RX and TX)
Transmission power (EIRP): FCC: <33dBm CE: <14dBm SRRC: <30dBm
Live view quality and end delay:
With DJI FPV Goggles V2: 810p/120FPS video transmission quality: less than 28ms latency. 810p/60FPS video streaming quality: less than 40ms latency.
With DJI Goggles 2: 1080p/60FPS video streaming quality: less than 30ms latency. 1080p/60FPS video streaming quality: less than 40ms latency.
Video Transmission Range: 10km (FCC), 2km (CE), 6km (SRRC)
Flight controller software supported: Compatibility with flight controller software that supports Betaflight. Please see the product FAQ for more information.
Input Voltage: 7.4-26.4V
Working temperature: -10°C to 40°C (14°F to 104°F)
Channels: Auto mode support Manual mode support: 40 MHz: 1 channel; 20MHz: 3 channels; 10MHz: 3channels;
Channel information: FCC / SRRC / CE: 40 MHz: Ch 1: 5794.5 MHz 20 MHz / 10 MHz: Ch 1: 5768.5 MHz Ch 2: 5804.5 MHz Ch 3: 5839.5 MHz
Supported SD cards: MicroSD (up to 256GB)
Recommended MicroSD cards:
SanDisk Extreme U3 V30 A1 32GB microSDXC
SanDisk Extreme Pro U3 V30 A1 32GB microSDXC
Kingston Canvas Go! Plus U3 V30 A2 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 64GB microSDXC
Kingston Canvas React Plus U3 V90 A1 128GB microSDXC
Kingston Canvas React Plus U3 V90 A1 256GB microSDXC
Samsung PRO Plus U3 V30 A2 256GB microSDXC
DJI Goggles supported: DJI Goggles 2 and DJI FPV Goggles V2
Supported DJI remote controllers: DJI FPV Remote Controller 2
Tips
Using DJI Goggles 2 and tested in an outdoor open environment without interference.
The 155° FOV is only available when using the 4:3 aspect ratio, and when the video recording specification is at 2.7K@50/60fps or 1080p@50fps/60fps; the aspect ratio is 16:9, and the video recording specification is at 4K@50/60fps, 2.7K@50/60fps, or 1080p@50/60fps.
4K/60fps videos do not support the aspect ratio of 4:3, and only support that of 16:9.
Includes:
1x DJI O3 Air Unit Camera Module
1x DJI O3 Air Unit Transmission Module
1x DJI O3 Air Unit Antenna
1x DJI O3 Air Unit 3-in-1 Cable
The Babyhawk O3 picks up where the Babyhawk II HD equipped with the Caddx Vista left off. Customers have loved the Babyhawk II platform, and we have heard the calls for a variant equipped with ExpressLRS and the DJI O3 Air Unit. This new version of Babyhawk is stronger than the previous generation and boasts a DJI O3 Air Unit, the new Babyhawk O3 can truly become a long-flying video capture acro drone for general use and fun as well as content creation. No more need to carry a GoPro, a big complaint of the Babyhawk II. Customers can now capture high-quality 4K video all with the onboard O3.
Check out all our pre-built quads, and all our EMAX gear!
Features
Improved video transmission with DJI O3 system
More durable frame redesigned for resilience.
Sub 250 grams
Specifications
Wheelbase: 155mm
Dry Weight: 154g
Frame Material: Carbon Fiber
Prop: Avan 3.5
Maximum size: 210mm
Input Voltage: 2-4S Lipo
Includes
1x EMAX BNF Babyhawk O3 w/ DJI O3 Air Unit - ELRS
The ultimate strap upgrade for your goggles! FatStraps are comfortable, durable, and available in an array of different styles.
Be sure to choose the right version for your goggles:
Analog (Closed End Loops) for Fatshark Analog
HD Thick (Snap End Loops) for DJI FPV, Walksnail Avatar, Fatshark Dominator HD
HD Thin (Snap End Loops) for DJI Goggles 2 & HDZero
(note that HD Thin straps should fit all the HD Thick strap goggles)
All FatStraps are made in the USA from high quality durable components, and the Military Grade straps are especially tough. The FatShark version has a stationary battery pouch sewn into the right side that perfectly holds your goggle battery or 18650 case. The DJI version has a removable sliding elastic section that allows you to mount your battery anywhere along the strap, or in your pocket. The material, fittings, and stitching on these straps are all top notch. More styles on the way!Check out all our FPV goggles & accessories!
Includes
1x Fat Straps 2" FPV Goggle Strap for Fatshark, Walksnail or DJI - Choose Your Style
The FETtec FC G4 V1.7 features the latest STM32G4 processor. Providing unparalleled processing power to your aircraft. Along with an IIM-42652 SPI gyro, two 5v BECs, 6-27V (2-6S) power handling, and a host of other features, the G4 from FETtec is on the cutting edge of Flight Controller technology.
Check out our other flight controllers, as well as the rest of our FETtec selection!
Dimensions:
Maximum outside dimensions: 37,2 x 37,2mm, without outside tips 30 x 30mm
Mounting hole arrangement:
20 x 20mm with M2 mounting hole (expandable to M3)
30 x 30mm with M3 mounting hole
30 x 30mm mounting hole tips are removable to reduce overall FC size
Specifications
Input Voltage: 2-6S LiPo
MCU: Latest STM32G473 Processor (w/ 180Mhz + Math accelerator)
Gyro: IIM-42652 SPI
OSD: YES
UARTs: 5 Sets
ESC Connections: Yes
Firmware: KISS firmware
BEC: 5V, 16V
Current Sensor: Yes
Buzzer: Yes
Barometer: No
Black Box: No
DJI Compatible: Yes
Mounting Pattern: 30x30 / 20x20
Dimensions: 37.2x37.2mm
Weight: 5.37g
Available downloads:
Download FETtec FC G4 manual
Download FETtec FC G4 v1.7 manual
Includes
1x Fettec FC G4 V1.7 2-6S 30x30 / 20x20 Flight Controller
1x 8 pin cable (open on one side)
1x 6 pin cable (open on one side)
1x 4 pin calbe (open on one side)
The FETtec KISS G4-N 2-6S 30x30 / 20x20 Flight Controller features the latest STM32G4 processor. Providing unparalleled processing power to your aircraft. Along with an MPU6000 gyro, two 5v BECs, 6-27V (2-6S) power handling, and a host of other features, the G4 from FETtec is on the cutting edge of Flight Controller technology.
Note: This G4-N is a variation on the original G4 and is optimized for digital use. If you are flying analog, you will need the original G4 with built-in OSD chip.
Check out our other flight controllers, as well as the rest of our FETtec selection!
Specifications
Input Voltage: 2-6S LiPo
MCU: STM32G4
Gyro:IIM-42652 SPI
OSD: No
UARTs: 5 Sets
ESC Connections: Yes
Firmware: KISS firmware
BEC: 3.3V, 5V, 16V
Current Sensor: Yes
Buzzer: Yes
Barometer: No
Black Box: No
DJI Compatible: Yes
Mounting Pattern: 30x30 / 20x20
Dimensions: 37.2x37.2mm
Weight: 5.37g
Includes
1x FETtec KISS G4-N 2-6S 30x30 / 20x20 Flight Controller
1x Capacitor
1x Wiring Harness
Footy is a fulfillment of multiple requests, all in one, do-it-all, package. Numerous pilots asked for a Five33 Engineered Freestyle Frame, a 5” TinyTrainer, and a clean Cinematic platform. So in typical Five33 fashion, we brought together the BEST team of pilots to test, improve, and deliver the ANSWER to all of those requests.
Check out all our DJI-compatible frames, electronics, and accessories and all our FIVE33 Flying Gear!
Features
Variable HD camera angle built-in
Injection Molded Canopy included
Mid Mount Battery. CG is king
Battery strap slots
Camera protection
Multiple configurations (Freestyle, Racer, & Livestream Mode)
DJI Air Unit Compatible (W/ 20×20 stack)
20×20 or 30×30 stacks
rear 20×20 mounting holes
LED Kit COMING SOON!
123g Frame Weight
All 3D files on thingverse!Link: https://www.thingiverse.com/thing:5151889
Includes
1x FIVE33 Footy 5" Frame Kit
4x 5" Arms
Spec’d for the heavy boys racing! Super fast, super strong, best of both worlds!
Long Configuration can be assembled in a Plus configuration by rotating the top plate, mid plate, and bottom plate 45 degrees. Lite arms are meant to make gates feel bigger and let you take closer lines, long arms are meant for clean air to all your props. TPU Kit Includes a variable cam mount and an SMA mount
Choose between the frame kit, or frame kit with Black TPU for camera mounting and antenna mounting.
Check out all our DJI-compatible frames, electronics, and accessories and all our FIVE33 Flying Gear!
Features
M5 Hardware! You’ll need a 3mm driver
T700 Arms
Long arm configuration
16mm-19mm Motor Mounting
SSRS v1.8
30.3×30.5 and 20×20 stack mounting
the top plate has mounting holes for 20×20, 25.5×25.5, and 30.5×30.5
the cavity between the mid and bottom plate can be filled with weight
Arm pairs for each motor have a combined minimum cross-sectional area of 90.01mm²
The battery can be mounted side to side or front to back by rotating the bottom plate
all 3d printed parts .stl’s available on printables.com
Specifications
Dimensions: 5×7×.6"
Top Plate Mounting Holes: 20×20, 25.5×25.5, & 30.5×30.5
Stack Mounting: 30.3×30.5 & 20×20
Motor Mounting: 16×16 & 19×19
Props: 7"
Includes
1x FIVE33 Spec7 7" Frame Kit
This FIVE33 Switchback HD 5" Racing Frame Kit offers an ultra-durable experience yet while keeping the frame lightweight for that racing performance. Get ready to take your racing to the next level by building your dream drone with top-notch performance. This frame has 20×20, 30×30, and 25.5×25.5 mounting options. The Switchback HD was designed to be compatible with all existing HD systems and allow for maximum flexibility in the build space. With this frame kit, your race experience will never be the same.
Note: To fit a vista you will need a 20×20 stack mounted in the forward offset stack location or taller standoffs. To fit an air unit, you will need a 30×30 AIO ESC/FC.
Note: Choose your arms type and if you want prints with your frame kit.
Thingiverse Listing: https://www.thingiverse.com/thing:4933552
We carry other Five33 5" Frames to look to look at.
Check out all our DJI-compatible frames, electronics, and accessories and all our FIVE33 Flying Gear!
Features
Arms for this frame are interchangeable
The Switchback HD was designed to be compatible with all existing HD systems and allow for maximum flexibility in the build space.
Lite arms = 33g SFG arms = 35g
SFG: The SFG arms are compatible with all Switchback V1 braces, SFGs, & BFGs
Lite(SPLT): Smallest possible arm length that can fit 5.1″ props
Specifications
Weight: 90.1g (Prints Included)
Dimensions: 6 x 12.70 x 0.25 cm
Arm Option: SFG Arms or SPLT
TPU Color: Championship Teal (Optional)
Motor Bolt Mounting: 16x16 & 19x19
Stack Mounting: 20x20, 30x30, and 25.5x25.
Arms Thickness: 5mm
Top Plate: 2mm
Bottom Plate: 2mm
Lock Plate: 3mm
Mid Plate: 2mm
Includes
1x FIVE33 Switchback HD 5" Racing Frame Kit - Choose Your Version
The DJI O3 Coaxial Camera Cable is a replacement or spare for the DJI O3 Air Unit.
Check out the rest of our FlyFishRC products selection!
Features:
Fits the DJI O3 Air Unit HD Camera
Length: 100mm/150mm/200mm (Optional)
Includes:
1x FlyFishRC DJI O3 Coaxial Camera Cable - Choose Length
Secure your Volador II 5" & 6" with this awesome looking black print antenna mount for the O3 Stubby Antenna.
Check out our FlyFishRC Frames & Accessories and check out our FlyFishRC Products selection!
Check out all our 3D printed accessories!
Includes
1x FlyFishRC DJI O3 Stubby Antenna Mount for Volador II 5" & 6" 3D Printed TPU - Black
Introducing the FlyFishRC Osprey FLIP G2 - tailored exclusively for DJI Goggles 2. This dual-band 2.4GHz/5.8GHz linear directional antenna improves signal strength and penetration with a plug-and-play MCX setup. It integrates vertical and horizontal polarized linear antennas, offering increased gain, better reception and transmission efficiency. The foldable design ensures that you can conveniently store the goggles in your standard protective case without the hassle of dismantling, taking user convenience to the next level. This design not only streamlines your experience but also addresses concerns about wear on the MCX connectors of the goggles. By minimizing wear and tear on these connectors, the Osprey FLIP G2 antennas significantly contribute to extending their durability and overall lifespan. Enjoy improved precision and connectivity and a low-profile design.
Check out all our FPV Receivers & Antennas and our FlyFishRC product selection!
Features
Compact and foldable design
Dual-Band 2.4GHz and 5.8GHz Technology
High-Gain Linear Antenna
MCX Connector, Perfect Compatibility with DJI Goggles 2
Easy Installation and Portability
Enhanced Stability than stock antennas
Specifications
Frequency Range：2.4-2.483GHz/5.7-5.9GHz
Gain：4dBi/5.8dBi
Beam Width: Horizontal 200 deg Vertical: 120deg@2.4GHz
Horizontal 170 deg Vertical: 65deg@5.8GHz
VSWR≤1.8:1
Polarization: Linear
Impedance: 50Ω
Connector: MCX
Weight: 8g/pc
Dimensions: L5.9mmxH2.9mmxW1.4mm
Includes
1x FlyFishRC Flip G2 Dual Band Antenna 5.8GHz / 2.4GHz MCX for DJI Goggles 2 (2pc) - Linear (Left & Right)
With its lightweight design and new 4-leaf construction, the FlyFishRC Osprey Antenna offers superb penetration, signal strength, and clarity, and is now available to FPV pilots at an incredibly attractive price.The Osprey Antenna features a transparent casing, and a unique hybrid network, which is smaller than other 5.8GHz CP antennas, Dimensions(head): 14.1mm diameter. X 14mm height.Although the Osprey Antenna is both small and light, it does not sacrifice any performance with a high gain of up to 2.8dBi and 99% radiation efficiency. Moreover, it outperforms most other antennas in all categories. Sophisticated engineering gives this antenna a near-perfect circular shape for better range and penetration.Its bandwidth covers the mainstream FPV 5.8GHz band with a 5.6GHz-6.0GHz frequency range. Regardless of the frequency you're on, you are guaranteed to have a signal as clear and strong as it’s possible.The Osprey Antenna casing is made of impact-resistant polycarbonate material that is hermetically sealed to protect the antenna elements inside.
Check out all our DJI-compatible gear and our FlyFishRC product selection!
Specifications
Radiation Efficiency: 99%
Avg. Gain: 2.82dbi
Polarization: LHCP
Connector: Gold-plated RP-SMA
Dimensions(head): 14.1mm dia. X 14mm height.
Length: 150mm
Cable: Protection tube RG141 coax.
Weight: 11.29g
Includes
1x FlyFishRC Osprey 5.8Ghz 150mm RP-SMA Antenna LHCP - Black
With its lightweight design and new 4-leaf construction, the FlyFishRC Osprey Antenna offers superb penetration, signal strength, and clarity, and is now available to FPV pilots at an incredibly attractive price.The Osprey Antenna features a transparent casing, and a unique hybrid network, which is smaller than other 5.8GHz CP antennas, Dimensions(head): 14.1mm diameter. X 14mm height.Although the Osprey Antenna is both small and light, it does not sacrifice any performance with a high gain of up to 2.8dBi and 99% radiation efficiency. Moreover, it outperforms most other antennas in all categories. Sophisticated engineering gives this antenna a near-perfect circular shape for better range and penetration.Its bandwidth covers the mainstream FPV 5.8GHz band with a 5.6GHz-6.0GHz frequency range. Regardless of the frequency you're on, you are guaranteed to have a signal as clear and strong as it’s possible.The Osprey Antenna casing is made of impact-resistant polycarbonate material that is hermetically sealed to protect the antenna elements inside.
Check out all our DJI-compatible gear and our FlyFishRC product selection!!
Specifications
Radiation Efficiency: 99%
Avg. Gain: 2.82dbi
Polarization: RHCP
Connector: Gold plated SMA
Dimensions(head): 14.1mm dia. X 14mm height.
Length: 150mm
Cable: Protection tube RG141 coax.
Weight: 11.29g
Includes
1x FlyFishRC Osprey 5.8Ghz 150mm SMA Antenna RHCP
With its lightweight design and new 4-leaf construction, the FlyFishRC Osprey Antenna offers superb penetration, signal strength, and clarity, and is now available to FPV pilots at an incredibly attractive price.The Osprey Antenna features a transparent casing, and a unique hybrid network, which is smaller than other 5.8GHz CP antennas, Dimensions(head): 14.1mm diameter. X 14mm height.Although the Osprey Antenna is both small and light, it does not sacrifice any performance with a high gain of up to 2.8dBi and 99% radiation efficiency. Moreover, it outperforms most other antennas in all categories. Sophisticated engineering gives this antenna a near-perfect circular shape for better range and penetration.Its bandwidth covers the mainstream FPV 5.8GHz band with a 5.6GHz-6.0GHz frequency range. Regardless of the frequency you're on, you are guaranteed to have a signal as clear and strong as it’s possible.The Osprey Antenna casing is made of impact-resistant polycarbonate material that is hermetically sealed to protect the antenna elements inside.
Check out all our DJI-compatible gear and our FlyFishRC product selection!
Specifications
Radiation Efficiency: 99%
Avg. Gain: 2.82dbi
Polarization: LHCP
Connector: Gold-plated RP-SMA
Dimensions(head): 14.1mm dia. X 14mm height.
Length: 104mm
Cable: Protection tube RG1.13 coax.
Weight: 6.90g
Includes
1x FlyFishRC Osprey 5.8Ghz 60mm RP-SMA Antenna LHCP
With its lightweight design and new 4-leaf construction, the FlyFishRC Osprey Antenna offers superb penetration, signal strength, and clarity, and is now available to FPV pilots at an incredibly attractive price.The Osprey Antenna features a transparent casing, and a unique hybrid network, which is smaller than other 5.8GHz CP antennas, Dimensions(head): 14.1mm diameter. X 14mm height.Although the Osprey Antenna is both small and light, it does not sacrifice any performance with a high gain of up to 2.8dBi and 99% radiation efficiency. Moreover, it outperforms most other antennas in all categories. Sophisticated engineering gives this antenna a near-perfect circular shape for better range and penetration.Its bandwidth covers the mainstream FPV 5.8GHz band with a 5.6GHz-6.0GHz frequency range. Regardless of the frequency you're on, you are guaranteed to have a signal as clear and strong as it’s possible.The Osprey Antenna casing is made of impact-resistant polycarbonate material that is hermetically sealed to protect the antenna elements inside.
Check out all our DJI-compatible gear and our FlyFishRC product selection!
Specifications
Radiation Efficiency: 99%
Avg. Gain: 2.82dbi
Polarization: RHCP
Connector: Gold-plated SMA
Dimensions(head): 14.1mm dia. X 14mm height.
Length: 60mm
Cable: Protection tube RG1.13 coax.
Weight: 6.90g
Includes
1x FlyFishRC Osprey 5.8Ghz 60mm SMA Antenna RHCP
With its lightweight design and new 4-leaf construction, the FlyFishRC Osprey Antenna offers superb penetration, signal strength, and clarity, and is now available to FPV pilots at an incredibly attractive price.The Osprey Antenna features a transparent casing, and a unique hybrid network, and is smaller than other 5.8GHz CP antennas, Dimensions(head): 14.1mm diameter. X 14mm height.Although the Osprey Antenna is both small and light, it does not sacrifice any performance with a high gain of up to 2.8dBi and 99% radiation efficiency. Moreover, it outperforms most other antennas in all categories. Sophisticated engineering gives this antenna a near-perfect circular shape for better range and penetration.Its bandwidth covers the mainstream FPV 5.8GHz band with a 5.6GHz-6.0GHz frequency range. Regardless of the frequency you're on, you are guaranteed to have a signal as clear and strong as it’s possible.The Osprey Antenna casing is made of impact-resistant polycarbonate material that is hermetically sealed to protect the antenna elements inside.
Check out all our DJI-compatible gear and our FlyFishRC product selection!
Specifications
Radiation Efficiency: 99%
Avg. Gain: 2.82dbi
Polarization: LHCP
Connector: UFL (IPEX-1)
Dimensions(head): 14.1mm dia. X 14mm height.
Length: 104mm
Cable: Protection tube RG1.13 coax.
Weight: 2.5g
Includes
1x FlyFishRC Osprey 5.8Ghz U.FL Antenna - LHCP 90mm
FlyFishRC offers a dual-band dual-polarized omni-directional antenna for the DJI O3 Air Unit that features internal integration of 2.4G and 5.8G dual-band dual-polarized technology to provide comparable compatibility and performance to the original device. It has a strong anti-interference capability for long-distance transmission and is equipped with a dual U.FL connector (IPEX1), making it small and lightweight. The antenna comes red with 95mm length. It's housing is made of impact-resistant polycarbonate material, providing a smooth surface and durability.
Check out all our DJI O3 Antennas and our FlyFishRC product selection!
Specifications
Frequency Range: 2400-2500MHz/5700-5900MHz
Gain: 2.5dBi/3.8dBi
VSWR≤1.6
Polarization: Linear
Impedance: 50Ω
Connector: 2x U.FL (2x IPEX1)
Cable: RF1.13
Weight: 3.2g
Size: Φ16x17mm
Includes
1x FlyFishRC Osprey Dual Band Antenna 5.8GHz / 2.4GHz 40mm U.FL Antenna for DJI O3 Air Unit - Red
FlyFishRC offers a dual-band dual-polarized omni-directional antenna for the DJI O3 Air Unit that features internal integration of 2.4G and 5.8G dual-band dual-polarized technology to provide comparable compatibility and performance to the original device. It has a strong anti-interference capability for long-distance transmission and is equipped with a dual U.FL connector (IPEX1), making it small and lightweight. The antenna comes black with 95mm or 40mm length. It's housing is made of impact-resistant polycarbonate material, providing a smooth surface and durability.
We only are selling the 95mm Antenna in Red.
Check out all our DJI O3 Antennas and our FlyFishRC product selection!
Specifications
Frequency Range: 2400-2500MHz/5700-5900MHz
Gain: 2.5dBi/3.8dBi
VSWR≤1.6
Polarization: Linear
Impedance: 50Ω
Connector: 2x U.FL (2x IPEX1)
Cable: RF1.13
Weight: 3.2g
Size: Φ16x17mm
Includes
1x FlyFishRC Osprey Dual Band Antenna 5.8GHz / 2.4GHz U.FL Antenna for DJI O3 Air Unit - Black - Choose Version
If you are looking for the next quality ultra-light 5" frame, look no further than the Tony 5!
Check out what FlyFishRC has to say about their frame!
FlyFishRC is excited to introduce a new addition to the relatively fresh sub-250g 5” freestyle drone category - the FlyFishRC Tony!In this modern era, where our hobby meets with aircraft weight restrictions, flying drones larger than 3” has become increasingly challenging. However, we all love a rip on a good old 5” drone, don't we? That's why we believed it was the perfect time to create an exceptionally lightweight 5-inch frame with the potential to craft a sub-250g 5” drone. And that's how Tony came to life.Our objectives were clear: create a lightweight frame with excellent flight characteristics and durability. While these aims are relatively straightforward with a standard 5-inch frame, working with a sub-250g 5” frame is an entirely different animal. We won't pretend that this frame was developed without any compromises, but we've given our all to make it a frame you'll eagerly take out to fly day after day!Tony is a straightforward and easy-to-build platform, fully O3-ready, equipped with our signature CNC aluminum camera plates to ensure your valuable camera remains maximally protected during all types of crashes. It's also compatible with analog cameras, VTX, as well as the HDZERO and Walksnail HD systems (Please verify dimensions for compatibility with all VTXs).We highly recommend using AIO flight controllers to keep the weight as light as possible, although a 20x20 mini stack will also work well.For instance, to achieve a sub-250g configuration in our test builds, we utilized a 40A AIO FC, CADDX Vista Nebula Pro, 2004 FlyFishRC Flash motors, TBS Crossfire Nano, bi-blade HQ props, GNB HV 380mAh 6S battery, and one battery strap, resulting in an all-up weight of 248.7g.However, if your intention is to use this frame with the DJI O3 system, the all-up weight of such a setup will increase to around 260g, as the O3 is notably heavier than the Vista. In this case, if staying under 250g is crucial, you might contemplate using a 4S version of the same battery or stripping down the O3 to shave off some of the excess weight.Overall, Tony is an exciting frame that offers an incredibly enjoyable flying experience. It provides a distinct feeling of being nimble yet not overly floaty due to its lightness. Get your own Tony today and share your feedback online; we'd love to hear about your experience!Anyway...- WHAT’S YOUR NAME?!- TONYYYYY!
Check out our other 5" frames as well as the rest of our FlyFishRC products selection!
Features
Only 57g (w/TPU)
Sub250g capable
High structural strength
High-end T700 carbon fiber
CNC aluminum camera plates
Silicone shock-absorbers for O3 AU
Compatible with both 19/20mm cameras
Compatible with most VTX
Compact body, well suited for freestyle
Equipped with all accessories needed for analog and HD builds
12.9-grade strength hardware with Loctite threadlocker pre-applied
Specifications
Model: Tony 5
Geometry: True-X
Wheelbase:215mm
Arm thickness: 4mm
Top plate thickness: 2mm
Middle plate thickness: 2mm
Bottom plate thickness: 2mm
Propeller size: 5inch
CNC plate thickness: 4mm
FPV cam spacing: 19mm/20mm
Weight: 57g(with TPU parts)
Total Dimensions:133.7mmx168x29mm
Stack mounting holes: 20mmx20mm/25.5mmx25.5.5mm(M3)
VTX mounting holes: 20mmx20mm/25.5mmx25.5mm(M2)
Includes
1x FlyFishRC Tony 5 5" Freestyle Frame Kit - Sub250
Convert any frame to use DJI O3 Air unit. Don't worry if your frame has the right holes!
Specifications
Item Name: Flywoo DJI O3 Air Unit 20x20 16x16 adapter plate Quantity: 3pcsThe Thickness of the Plate: 1mmWeight: 0.7g
Includes
3x Flywoo DJI O3 Air Unit 20x20 / 16x16 Adapter Plate1x screw pack
These Cables are digital HD video cables that work with the DJI O3 system.
The DJI O3 Coaxial Camera Cable is a replacement or spare for the DJI O3 Air Unit.
Make sure to check out the rest of our Flywoo selection!
Features
10/15/20/30cm Cable Length Options
Works with the DJI O3
Specifications
Compatibility: DJI O3
Length Options:
100mm (10cm)
150mm (15cm)
200mm (20cm)
300mm (30cm)
60mm(6cm)
Includes
1x DJI O3 Coaxial Cable (Choose length)
The Firefly Hex Nano Propeller Guards protect the propellers and other objects from damage. Works with Firefly Hex Nano Analog / DJI HD
Check out our other great pre-built drones, as well as the rest of our Flywoo offerings.
Includes
2x Flywoo Firefly Hex Nano Propeller Guards
For those hard-to-reach DJI Air unit and Caddx Vista USB-C port connections, this is a great little adapter! Also works with flight controllers that utilize C-type connectors.
If preferred, we also carry a version for Male Micro USB to Female USB-C.
Check out our Flywoo selection.
Specifications
Brand Name: FLYWOO
Item Name: Type C USB Adapter
Application: DJI AIR UNTI, CADDX VISTA, flight controllers that utilize C-type connector
Weight: 1.3g
Size：20x8x13mm
Includes
1x Flywoo Type C USB Adapter（male + female）
1x wire ( 10cm )
1x Transparent heat shrink tube
Guard your camera lens from dust, dirt, and scratches with this Flywoo Naked DJI O3 Air Unit ND Filter (1pc) - Clear UV.
Check out the rest of our replacement cam parts & accessories, as well as the rest of our Flywoo selection!
Features
Protects your camera lens
Fits all O3 Air unit drones
Super tight fit
Easy to use
Lightweight
Includes
1x Flywoo Naked DJI O3 Air Unit ND Filter (1pc) - Clear UV
Flywoo designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. This enables micro-drones to unlock their video creation potential and improves visual and control experience. Pilots can enjoy high-definition real-time transmission and smooth control in tight spaces. The modification ensures stability and reliability, providing greater maneuverability and extended flight time. Flywoo aims to meet the demands of drone enthusiasts, delivering excellent visual and control experience. Included with this kit is the naked O3 camera, naked O3 Lite VTX, antenna, clear UV lens, and hardware.
Overall, the Flywoo Naked O3 Lite/Ultra Air Unit is an excellent product for those who looking to shave off some weight from their DJI O3 Air Unit. There are 3D printed alternatives, but the ease of use, precision and robustness of CNC parts are probably better bets. The design is well thought-out, and the conversion process is straightforward.
Check out our Flywoo selection and check out our other DJI O3 Products!
Features
Equipped with high-definition real-time transmission and video recording functions, with the advantage of low latency transmission.
Lightweight, solves the weight problem of micro drones, reducing up to 37%~50% of weight.
Lightweight 7075 aluminum alloy fixed frame, sturdy and reliable.
Improves the control experience of micro drones and increases flight time. Can also create 4K high-definition videos in indoor or small spaces.
Specifications
Product Dimensions: 21.2x20x17.9mm(CAM)/29.8x28.8x13.3mm (VTX)
Transmission Resolution: 1080/4K 120FPS
Product Model: FLYWOO O3 LITE
Product Weight: 23.2g (O3 LITE)
Input Voltage: 7V-26V
Recommended (Not Included)
Flywoo Naked O3 ND Filter Set - ND4/ND8/ND16
Includes
1x Flywoo Naked O3 Lite Air Unit (w/ camera module & antennas)
Flywoo designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. This enables micro-drones to unlock their video creation potential and improves visual and control experience. Pilots can enjoy high-definition real-time transmission and smooth control in tight spaces. The modification ensures stability and reliability, providing greater maneuverability and extended flight time. Flywoo aims to meet the demands of drone enthusiasts, delivering excellent visual and control experience. Included with this kit is the naked O3 camera, naked O3 Ultra VTX, antenna, clear UV lens, and hardware.
Overall, the Flywoo Naked O3 Lite/Ultra Air Unit is an excellent product for those who looking to shave off some weight from their DJI O3 Air Unit. There are 3D printed alternatives, but the ease of use, precision and robustness of CNC parts are probably better bets. The design is well thought-out, and the conversion process is straightforward.
Check out our Flywoo selection and check out our other DJI O3 Products!
Features
Equipped with high-definition real-time transmission and video recording functions, with the advantage of low latency transmission.
Lightweight, solves the weight problem of micro drones, reducing up to 37%~50% of the weight.
Lightweight 7075 aluminum alloy fixed frame, sturdy and reliable.
Improves the control experience of micro drones and increases flight time. Can also create 4K high-definition videos in indoor or small spaces.
Specifications
Product Dimensions: 21.2x20x17.9mm(CAM)/29.8x28.8x13.3mm (VTX)
Transmission Resolution: 1080/4K 120FPS
Product Model: FLYWOO O3 Ultra
Product Weight: 18.3g (O3 Ultra)
Input Voltage: 7V-26V
Recommended (Not Included)
Flywoo Naked O3 ND Filter Set - ND4/ND8/ND16
Includes
1x Flywoo Naked O3 Ultra Air Unit (w/ camera module & antennas)
The Foxeer H7 is an advanced and reliable 4-8S flight controller with dual built-in BECs and a barometer. It features a fast and powerful MPU6000 processor to provide accurate and consistent performance with less vibration in flight. Enjoy worry-free flying with this top-class controller.
Check out our 30x30 Flight Controllers as well as Foxeer Collection!
Features
5V/10V Dual BEC
MPU6000 32K Flash Rate
Plug & Play with Foxeer cameras
Specifications
Model: Foxeer H7
CPU: FOXEERH743
Gyro: MPU6000
Barometer: DPS310
Power Supply: 4-8S Lipo
BEC Output: 3.3V/0.5A;DC5V/2A;DC10V/2A
OSD: BF OSD
Black Box: 16M Flash Memory
UART: 6 Sets+Rx8
ESC Telemetry: RX8
Buzzer: Yes
Connector: DJI/HDZero
Smart Audio: Yes
LED: 1 Set 2812 LED
USB: Type-C
Servo: S1,S2
X8: Supported
Firmware(BetaFlight): FOXEERH743
Size: 37X37mm
Mounting Hole: 30.5 x 30.5mm, Φ4mm
Weight(g): 7.8g
Working Temperature: -20℃ ~ +55℃
Working Humidity: 20～95%
Storage Temperature: -20℃ ~ +70℃
X8 Setup CLI
X8 Setup CLI
Includes
1x Foxeer H743 X8 4-8S 30x30 Dual BEC Barometer Flight Controller - MPU6000
4x M3 Grommets
1x Cable
