All AS-IS products will have no customer support. QC and a complete product will vary. Buy at your own risk.
Factory refurbished, but missing universal 110v power plug that can be sourced from many other electronics laying around your house now!
Charge up to 6 1S micro batteries with this handy charger.
Check out our other 1S Battery Chargers and Accessories!
Specifications
Input Voltage: AC100-240V /DC7-17V
Charge Power: Max.4.35W x6 (+/-10%)
Charge Current Range: (0.1-1A) x6 (+/-10%)
Battery Type: LiPO/LiHV
Battery Cell Count: 1 cell
Indication: LCD display
Support battery port: Micro, Mx, JST, mCPX
Net Weight: 200g
Dimension: 125x78x42mm
Includes
1x (AS-IS) Ultra Power UP-S6AC 4.35W 1A 1S LiPo/LiHV 6 Channel AC/DC Whoop Charger (NO CABLES)
All AS-IS products will have no customer support. QC and a complete product will vary. Buy at your own risk.
Factory refurbished, but missing universal 110v power plug that can be sourced from many other electronics laying around your house now!
The UP6 is a more compact, lighter, and less expensive version of the UP6PLUS smart charger; designed specifically for the RC hobby. All relevant charging data can be seen clearly, thanks to the 2.4" IPS LCD display, and also contains Wireless charging for mobile devices.Delivering 160W of charging power using AC input or 400W using DC, the UP6 is capable of charge rates up to 10A. Convenient, compact, economical, and easy to use, the UP6 may be the most versatile and useful charger on your workbench!
Check out our UltraPower Chargers and all our battery chargers and accessories!
Specifications
Input Voltage: AC 100-120V or 220-240V, DC 9.0-32.0V
Output Voltage: 0.1-30.0V
Charging Current: 0.1-10.0A x 2
Discharge Current: 6W (200W using UPTUPD200)
Charge Power: DC Input: 2x200W, AC Input: Max.160W (CH1 + CH2)
Wireless Charge Power: Max. 10W
Battery Types: LiPo/LiHV/LiFe/Li-Ion 1-6S
NiMH/NiCd 1-16S
Pb (Lead Acid) 2V-24V (1-12S)
Dimension: 100x99x64mm
Weight: 460g
Includes
1x (AS-IS) UltraPower UP6 200W 10A 1-6S LiPo/LiHV Dual Channel AC/DC Charger (NO CABLES)
All AS-IS products will have no customer support. QC and a complete product will vary. Buy at your own risk.
Factory refurbished, but missing universal 110v power plug that can be sourced from many other electronics laying around your house now or powered via DC!
Ultrapower UP6+ 600W 16A Dual Channel AC/DC Charger is a powerful smart charger specially designed for RC hobby. The UP6+ is an upgraded version of the UP610 and UP616. Coming with a 3.5" full LCD screen display, you can view the charging data for motors, servos and even your smartphone!
Check out our UltraPower Chargers and all our battery chargers and accessories!
Features
Two independent shuttle key control the charger
Wireless charging port, support to charge at Max.10W
Support testing the servo and motor
Support external discharging at Max.200W, 15A
Support power distribution both in AC and DC mode
With a USB port: 5V/2.1A
PC Control & Firmware Upgrade
Specifications
Input Voltage: AC 100-120V or 220-240V, DC 9-32V
Output Voltage: 0.1-30.0V
Charge current: 2 x Max.16.0A
Discharge current:CH1: 0.1-3.0 A / 0.1-15.0 A
(External discharge mode) CH2: 0.1-3.0 A
Charge power:AC 2x150 W/DC 2x300W
Support power distribution
Wireless Charge Power: Max. 10W
Discharge power:
CH1: 8W/200W (External discharge mode Requires D200 discharger)
CH2: 8W
Balance current: Max. 1000 mA/cell
Support Battery Types: LiPo/LiFe/LiHV/LiIo
Cell count: 1-6 cells NiCd/NiMH battery
Cell count: 1-16 cells Pb battery voltage: 2V-24V (1-12 cells)
LCD Screen type: 3.5" 480×320
Dimensions:120x115x75 mm
Weight:750g
Includes
1x (AS-IS) UltraPower UP6+ 300W 16A 1-6S LiPo/LiHV Dual Channel Smart Charger (NO CABLES)
All AS-IS products will have no customer support. QC and a complete product will vary. Buy at your own risk.
Factory refurbished, but missing universal 110v power plug that can be sourced from many other electronics laying around your house now!
The Ultra Power UP616 is a special pocket sized charger, which has a whopping maximum power of 400W or 16A! At only 200g, it supports most types of batteries, like Lithium batteries (LiPo, LiHV, LiIon, LiFe), NiMh, NiCd, and lead acid battery.
Check out our UltraPower Chargers and all our battery chargers and accessories!
Features
Support external discharging at Max.200W, 15A.
Delta-Peak sensitivity (NiMH/NiCd)
Individual cell balancing charge & discharge
Battery meter function
One button control factory setting
Specifications
Input Voltage: DC9.0-32.0V
Output Voltage: 0.1-30.0V
Charge Current: 0.1-16.0A
Discharge Current 0.1-3.0A / 0.1-15.0A (External Discharge Mode)
Charge Power: Max. 400W
Discharge Power: Max. 8W/200W (External Discharge Mode)
Battery Types:
LiFe/LiIon/LiPo/LiHV (1-6S)
NiMH/NiCd (1-16S)
Pb (1-12S)
Balance Current: 1000mA/cell
Dimensions: 90x70x42mm
Weight: 130g
Includes
1x (AS-IS) UltraPower UP616 400W 16A 1-6S LiPo/LiHV Smart Charger (NO CABLES)
LOS00007, Losi Micro-B 2.0 1/24 RTR 2WD Buggy w/2.4GHz Radio, Battery & Charger
TLR Champion Race Inspired
The Losi Micro-B 2.0 1/24 RTR 2WD Buggy captures the excitement of RC racing in a compact, highly maneuverable package that’s small enough to run almost anywhere. Inspired by TLR's World Champion buggy, this micro-sized racer delivers big performance and agility. Whether you're racing in your living room or on a homemade track, the Micro-B's precision engineering, compact size, and TLR-inspired design make it an ideal choice for both casual RC enthusiasts and those looking to share their passion for racing with friends and family. Its RTR (Ready-To-Run) design means no additional accessories are needed, making it an easy and budget-friendly entry point into the RC world.
Performance Oriented Components
The Micro-B features a black-anodized aluminum chassis, setting a higher standard for micro RC vehicles with its rigid, durable construction. This chassis is designed with front caster kick and side bends to offer superior strength, ensuring it can withstand the bumps and jumps of intense racing. Paired with fully adjustable oil-filled shocks, the buggy delivers excellent handling and a smooth ride over various surfaces. The Pro-Line Racing body, wheels, and tires give it an authentic look and performance edge, reminiscent of full-scale race-winning designs, adding to the realism and enhancing your racing experience.
Electronics & Drivetrain
At the heart of the Losi Micro-B is its powerful Spektrum 350mAh LiPo battery and fully proportional electronics, allowing for precise control and speeds of 13+ mph — insane for a vehicle of this size! The Spektrum SLT2 2.4GHz radio ensures interference-free racing, while a throttle limiter provides “rookie mode” settings for safe learning at 50% or 75% speed. With over 20 minutes of run time and a convenient USB-C charger, this buggy offers reliable, high-speed fun that’s easy to recharge and race again in no time.
Features:
Modeled after a championship-winning buggy for race-ready performance
Pre-assembled and ready out of the box with all necessary components
Pro-Line Racing body, wheels & tires
Delivers incredible speed for a micro buggy
Adjustable race inspired oil-filled shocks
Extremely rigid and durable black anodized aluminum chassis
Spektrum powerful, reliable and responsive electronics
Small enough to race almost anywhere, from indoor to outdoor tracks
Offers 20+ minutes of run time and fast recharge with the USB-C charger
Customizable speed settings for beginner, intermediate, and advanced drivers
This product was added to our catalog on October 2, 2021
(Pre-Order) ASC70002, Team Associated RC10T Classic Kit
Introducing the RC10T Classic: A True Retro Revival
Step back in time to the golden era of RC racing with the RC10T Classic, a faithful recreation of the iconic RC10T from 1991. As a tribute to the glory days of off-road racing, this classic model embodies the essence of its predecessor, capturing the spirit and performance that made the original RC10T a legend on the track.
At the heart of the RC10T Classic lies the legendary Stealth transmission, the secret weapon that dominated the racing scene from 1989 to 1991. Renowned for its unparalleled efficiency and seamless power delivery, the Stealth transmission ensures lightning-fast acceleration and precise control, just like its predecessor did decades ago.
With its black-anodized aluminum tub chassis featuring a laser etched RC10T logo, the RC10T Classic pays homage to the original design that captured the hearts of RC enthusiasts worldwide. This timeless chassis provides the perfect balance of strength and agility, allowing drivers to tackle any terrain with confidence and precision.
Team Associated is thrilled to celebrate our 60th anniversary alongside the release of the RC10T Classic. It's more than just a model; it's a journey back in time to a period when RC racing was at its peak. Get ready to unleash the power of the Stealth transmission and write your own chapter in RC racing history with the RC10T Classic by Team Associated.
Team Associated's RC10T is the fastest, most reliable race truck because it was developed by the same winning engineering that produced nine World Champion.
Like all Associated RC race cars, the RC10T was toughened, refined, and proven in competition before the design was finalized. Even though our drivers had no truck racing experience, they took on all corners from Coast to Coast to make sure your RC10T is a winner, too. RC10T's took first and second in the Florida Winter Championships against a field of 450 entries.
Unlike other truck and RC10 conversion kits, no compromises were made with the RC10T. Working closely with the latest ROAR specifications for Offroad Truck racing, our R&D team designed a purpose-built machine with the response and handling serious racers demand.
Thus, the front and rear track of the RC10T were widened for maximum cornering speeds. The wheelbase was lengthened, and a special narrow bulkhead improves high-speed stability. To cope with the larger tires and longer suspension travel, shock tower design was critical as well.
Even the body of the RC10T is part of the winning combination. Vacuum-formed low and lightweight, it protects the shock towers as well.
The result is predictably awesome. With its high efficiency Stealth transmission, lightweight chassis and suspension, full race shocks and grippy rubber, the RC10T delivers explosive performance, even with stock class motors and batteries.
This product was added to our catalog on May 19, 2024
FRSKY version in stock and shipping SAME DAY!!! ELRS and TBS Pre-Orders shipping ASAP! All products with batteries must be shipped by a ground shipping method.
For your next analog whoop sized quad, go with this ultra-powerful 1S BNF. Small and nimble enough to cruise through tight spaces, and enough power to push it outside where you want to fly. Great for those who are new to this territory and wish to get started.
Meteor75 Pro features 45mm propellers, being the largest 1S whoop drone for greater thrust and lift. Comes with more powerful 1102 22000KV motors and a new BT2.0 550mAh 1S battery. Besides, it has the same flight controller, analog VTX system, and canopy as the F4 1S 5A FC, C03 FPV camera, M03 350mW VTX, and Micro Canopy on Meteor75. This combo gives the Metoer75 Pro more flight time while being faster & more responsive. That makes this whoop ideal for FPV racing or acrobatic flying indoors or outdoors.
Note: The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP.
Make sure to check out our other Pre-Built quads and the rest of our BetaFPV selection!
Features
The upgraded frame that fits 45mm props perfectly makes Meteor75 Pro the largest 1S whoop drone. Powered with 1102 22000KV motors, it performs smoothly in the air and is maneuverable for freestyle tricks.
It features a roomier battery slot that can accommodate a bigger battery such as BT2.0 550mAh 1S battery, which provides a larger capacity and higher discharge rate, bringing more flight time and robust flight performance to the quadcopter.
Built-in 1.45g ultralight weight and upgraded C03 FPV camera. This new camera has optimal performance for indoor whoop drones.
Adopt with injection molding technique, this canopy is 1.60g ultralight weight and is more durable, anti-ruin, and heat-resistant, providing good protection for the whoop drone..
Equipped with F4 1S 5A flight controller (Serial ELRS 2.4G or SPI Frsky). The ELRS 2.4G RX version comes with the default ELRS V2.0 firmware and supports being upgraded to ELRS V3.0 separately without flashing Betaflight flight controller firmware. The SPI Frsky version can be also used as the PNP version to connect external receiver due to the two UART ports on the board.
The various colors of the spare parts including the Meteor75 Pro frame and micro canopy, offer pilots more choices. Using them with BETAFPV waterslide decals, pilots can easily DIY and build their unique whoop drones.
Meteor75 Pro VS Meteor75
Upgraded from Meteor75, the Meteor75 Pro is the largest 1S whoop drone with 45mm propellers, which is able to generate more thrust and lift. It comes with a 550mAh larger battery, and higher KV motors, making it more suitable for performing acrobatic maneuvers. The Meteor75 uses 0802SE 19500KV motors, 40mm props, and a 450mAh battery, which are great for lighter quadcopters.
Meteor75 Pro
Meteor75
Weight
31.33g
24.98g
Frame
Meteor75 Pro Frame
Meteor75 Frame
Motors
1102 22000KV Motors
0802SE 19500KV Motors
Propellers
45mm 3-Blade Props
40mm 2-Blade Props
Battery
550mAh 1S Battery (Default), 450mAh 1S Battery
450mAh 1S Battery (Default), 550mAh 1S Battery
Flight Time
6:40
6:00 (450mAh), 6:50 (550mAh)
Flight Controller
The latest F4 1S 5A flight controller is applied to all BNF versions of Meteor75 Pro. It features Serial ELRS 2.4G instead of SPI ELRS 2.4G for ELRS version compared to the previous version. The Frsky version reserves two UART ports for the available external receiver so it can be used as PNP. The ESC on the new board is powered by BB51 hardware in place of BB21. Last but not least, we update the gyro to BOSH BMI270 for better performance and stability since the new F4 1S 5A FC.
Meteor75 Pro (ELRS)
Meteor75 Pro (Frsky, PNP, TBS)
FC Inside
F4 1S 5A FC (Serial ELRS 2.4G) V2.0
F4 1S 5A FC (SPI Frsky) V3.0
Gyro
BMI270
BMI270
FC Firmware
BETAFPVF411
BETAFPVF411RX
UART Port
One UART Port
Two UART Ports
External RX
Not Supported
Supported
Note: For Serial ELRS 2.4G, the Betaflight firmware 4.3.0 and up start to support BMI270 gyro. For SPI Frsky, DO NOT flash the other firmware, otherwise, the RX will be lost in control at a very close range.
Please flash betaflight_4.2.11_BETAFPVF411RX firmware built by BETAFPV for SPI Frsky.
Download the FC firmware and CLI dump file for Meteor 75 ELRS2.4G, Frsky, or TBS.
C03 Camera
C03 is a lightweight 1.45g and 1200TVL resolution camera that has been designed to provide superb performance for micro FPV quadcopters. It has a 2.1mm lens that gives a 160° field of view, operating in 4:3 image ratios, and features a 1/3'' CMOS sensor for clear and brilliant images.Powerful 1S Drone Combo
Meteor75 Pro with 45mm 3-Blade props performs very precise, agile, and fantastic flying, which is the largest 1S power whoop drone nowadays. Fit out with 1102 22000KV motors and BT2.0 550mAh 1S battery, Meteor75 Pro has an excellent thrust-to-weight ratio performance.Endurance Boosting Battery
Meteor75 Pro applies the new BT2.0 550mAh 1S battery, which is capable of delivering a discharge rate of 40C (continuous) and 80C (burst). With its larger capacity and stronger power, pilots can enjoy more flight time and a robust flight experience.Meteor75 Pro Frame
Meteor75 Pro frame is the largest 1S whoop frame with 45mm propellers currently and comes with more features. The frame features a roomier battery slot for more battery choices such as BT2.0 550mAh battery. The motor holder is using a triangle bilateral stretch structure, giving pilots a more durable and smoother flight experience. In addition, the Meteor75 Pro frame offers seven colors for options, which pilots should purchase separately.
Specification
Item: Meteor75 Pro Brushless Whoop Quadcopter
FC&ESC: F4 1S 5A FC (Serial ELRS 2.4G) V2.0/F4 1S 5A FC (SPI Frsky) V3.0
Frame: Meteor75 Pro Brushless Whoop Frame
Motors: 1102 22000KV Motor
Props: Gemfan 45mm 3-Blade Propellers (1.5mm Shaft)
Camera: C03 FPV Camera
Tilt: 30° (default)/20° (optional)
Canopy: Canopy for Micro Camera 2022 version
Receiver Option: Serial ELRS2.4G, Frsky/PNP, TBS Crossfire
VTX: M03 25-350mW VTX
Battery: BT2.0 550mAh 1S Battery
Flight time: 6:40 mins (stable flying) / 4.5 mins (acro flying)
Weight: 31.33g
FAQ
Download the FC firmware and CLI dump file for Meteor75 Pro.
Includes
1x Meteor75 Pro Brushless Whoop Quadcopter
2x BT2.0 550mAh 1S Battery
1x Type-C USB Cable
1x BT2.0 Battery Charger and Voltage Tester
4x 45mm 3-Blade Props (1.5mm Shaft)
1x Screwdriver
1x Pack of Screws
1x Accessories for Canopy
Pre-Orders shipping ASAP!
With the rapid development and continuous growth of the FPV industry, based on market feedback and the efforts of our R&D team, we have launched a brand new product - the Gofilm 20. As the first FPV drone from CaddxFPV, it mainly meets the needs of most pilots and the first 4K starlight drone in the market.
Check out pre-built quads, and our CADDX selection!
Features
Equipped with the Avatar Moonlight Kit, the Gofilm 20 brings more possibilities to pilots, shooting stable and HD videos without unnecessary latency, making it easy to capture cinema-quality images whether day or night, redefining - HD FPV.
Compact and Delicately Design:Gofilm 20 features a lightweight design, occupying a smaller footprint and weighing about 115g, ensuring agile flight and extended endurance. With a 94mm wheelbase and a robust propulsion system, light but fast.
HD Digital VTX System:Standard with the moonlight kit, it offers enhanced image quality and low-light performance for night-time shooting.Supports 4K/60fps, ensuring that FPV embraces true 4K. Shooting stable and HD videos without unnecessary latency, bring pilots a smoother FPV experience.Equipped with EIS and Gyroflow technology. Supports manual shutter and manual ISO settings.The moonlight camera has a 160° FOV, providing you with a more natural and real picture for the ultimate flying experience.Additionally, the 25.5mm and 20mm mounting hole designs accommodate various accessories.
Gofilm 20 Frame Kit:The frame features a 94mm wheelbase, with damping design for the camera, ensuring smoother video recording. Utilizing integrated injection molding technology, it simplifies installation by eliminating the hassle of adjusting screw tightness. Built-in XT30 plug design to avoid damaging wires. The standalone frame weighs only 30.5g, offering durability, crash resistance, and heat resistance. Compatible with most analog and HD VTX systems.
Flight Controller:The GOFILM 20 comes equipped with an AIO flight controller integrated with ELRS receiver, the power system meets 2-4S.
Powerful Propulsion System:Featuring 1303 6000KV motors, tailored for the Gofilm 20, offering the perfect synergy with 2-inch propellers. With a recommended 650mAh battery, enhancing operational feel, with a flight time of up to 5.5 minutes, allowing uninterrupted capture of stunning aerial footage. Elevate your flight experience to new heights with the Gofilm 20.
The Gofilm 20 is not only suitable for indoor and outdoor flights but also excels in various scenarios such as competitions and professional filming. Its versatility allows you to experience a wide range of flying environments, enhancing your overall flight experience.
Specifications
Gofilm 20
Model: Gofilm 20
FC: CADDXF4_AIO_ELRS
VTX: Moonlight Kit
Wheelbase: 94mm
Motor: 1303 6000KV
Propeller: HQprop T2×2×3
Weight: 115±5g
Size: 133×123×39mm
Flight time: 4S 650mAh & about 5.5 minutes
Receiver: ELRS 2.4G
Battery interface: XT30
FC Parameters
MCU: STM32F405RGT6
GYRO and IMU: ICM42688
Barometer: BMP280
ExpressLRS receiver: ELRS V3.0 UART
ESC: 20A 4-IN-1
Blackbox: 8MBp
Support Power: 2~4S Lipo/Lihv
Mounting hole Distance: 25.5×25.5mm
Firmware target: CADDXF4_AIO_ELRS
VTX Parameters
Model: Moonlight Kit
Firmware name: AvatarMoonlight_Sky_X.X.X
Communication Frequency: 5.725-5.850 GHz
Transmitter Power (EIRP): FCC: <30dBm; CE: <14dBm; SRRC: <20dBm; MIC: <25dBm
I/O Interface: JST1.0x4(power cable); JST0.8x6(USB)；microSD Card Slot; IPEX-1
Sensor: Starlight sensor
FOV: Max 160°
Aperture: F2.1
Shutter: Rolling shutter
ISO: 100-25600
Recording resolution: 4K@30/60fps; 2.7K@30/60fps; 1080p@100/60fps; 720p@60fps
Max Mbps: 150Mbps
Video format: MP4 (H.264)
3D DNR: Support
Gyro flow: Support
Built-in EIS: Support
Wide Power Input: 7.4V-25.2V
Power consumption: 12V@1.4A, 8V@2.2A
Memory card type: U3 microSD, Max 256G
camera size: 19.6mm×19mm×24mm
VTX size: 15.3mm×34.5mm×34.5mm
VTX Installation hole: 20×20mm/25×25mm (M2)
Weight: 38.5g (Antenna not included)
OSD: Canvas mode
Latency Average delay: 22ms
Antenna: 2 (IPEX)
Includes
1x CADDXFPV Gofilm 20 2-4S 2" BNF w/ Walksnail Moonlight & ELRS 2.5GHz
4 x M2x6mm
4 x M2x8mm
1 x 1.5mm Allen wrench
1 x usb data cable
1 x 180mm strap
1 x paddles
1 x Micro usb data cable
1 x Instruction manual
Pre-Orders shipping ASAP! All products containing batteries must be shipped by a ground shipping method.
Ready to take outdoor FPV quadcopter flight to the next level? Embark on the future with the all-new Tiny Hawk 3 Plus Freestyle-- precision-engineered for extended airtime. It features a 1225 7000 KV motor and Avan Rush 2.5" propellers for exceptional grip and thrust. Durability is elevated with an upgraded 3K Carbon Fiber-blend frame. The analog system is optimized for signal strength and stability so that you can fly with confidence in challenging environments.
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
Check out all our pre-built quads, and all our EMAX gear!
Specifications
TINYHAWK 3 PLUS FREESTYLE ANALOG BNF
Wheelbase: 110mm
Weight: 62.5g
Motor: 12025 7000KV
Propellers: AVAN Rush 2.5
Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)
Camera: Runcam Nano
VTX: 32Bit 40Ch 0/25mW/100mW/400mW
Battery: 1S 650mAh
Includes
1x Tinyhawk 3 Plus Freestyle Analog BNF
2x EMAX 1S HV 650mAh Battery
1x Hardware Kit
1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)
1x USB Battery Charger
Pre-Orders shipping ASAP! All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and an optional variant with HDZero advancements in transmission. This is truly the ideal way to try out FPV!
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
Check out all our pre-built quads, and all our EMAX gear!
Specifications
Wheelbase: 76mm
Weight: 32.5g
Motor: TH0802 II - 15000KV
Propellers: Avia Tinyhawk
Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)
Camera: Runcam Nano
VTX: 32Bit 40Ch 0/25mW/100mW/400mW
Battery: 1S 650mAh
Includes
1x Tinyhawk 3 Plus Analog BNF
1x EMAX 1S HV 650mAh Battery
1x Hardware Kit
1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)
1x USB Battery Charger
Pre-Orders shipping ASAP! All products containing batteries must be shipped by a ground shipping method.
The Tinyhawk 3 Plus series, an FPV racing drone that takes micro performance to new heights. They listened to customers' feedback and made significant enhancements, including the incorporation of ExpressLRS technology and HDZero advancements in transmission. This is truly the ideal way to try out FPV!
The Tinyhawk 3 Plus series drones now feature ExpressLRS control technology, a significant upgrade from the previous FrSky system. ExpressLRS offers remarkable improvements in range, signal reliability, and latency, ensuring you have precise control over your drone, even in challenging environments. With the Tinyhawk 3 Plus, customers can fly confidently, knowing that commands will be executed with the utmost precision.
The HDZero variant elevates the FPV video experience to the next level. This cutting-edge digital transmission technology ensures crystal-clear video with low interference, providing a truly immersive and cinematic view while piloting Tinyhawk 3 Plus.
This is an ideal way for beginners to enter the FPV scene. With this RTF kit, you will get a Tinyhawk 3 Plus HD BNF, EMAX E8 Transmitter (ELRS-2.4G), EMAX Transporter 2 HDZero Goggles, EMAX 1S HV 650mAh battery, USB Battery charger props, and hardware.
Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!
Specifications
TINYHAWK 3 PLUS HDZERO
Wheelbase: 76mm
Weight: 35.5g
Motor: TH0802 II - 15000KV
Propellers: Avia Tinyhawk
Flight Controller: STM32F411, 6A BLHeli_S, 1-2S Integrated ELRS (2.4G)
Camera: Runcam HDZero Nano Lite
VTX: HDZero Whoop Lite 0/25mW/200mW
Battery: 1S 650mAh
E8 TRANSMITTER (ELRS-2.4G)
Dimensions: LxWxH=150x140x45mm
Weight: 260g
Channels: 8
Protocol: ELRS 2.4G
Band: 2.4gHz（2400-2483.5MHz）
Power Levels: 10mW/25mW/50mW/100mW
Battery: 800mAh 18650
Charging: USB-C 1A Recommended
Operating Voltage: 3.7-4.2V
Input: Type-C, 3.5mm
TRANSPORTER 2 HD GOGGLES
Dimensions: LxWxH=155x100x90mm
Weight: 425g
Screen Resolution: 720x1080
Screen Size: 4.45 Inch
Battery: 2200mAh Integrated
Operating Voltage: 3.7V-4.2V
Band: Digital HDZero 5.8GHz（5658-5945MHz）
Charging: USB-C 1A Recommended
DVR: 32GB Micro SD Recommended
Includes
1x Tinyhawk 3 Plus HD BNF
1x EMAX E8 Transmitter (ELRS-2.4G)
1x EMAX Transporter 2 HDZero Goggles
2x EMAX 1S HV 650mAh Battery
1x Hardware Kit
1x Avan Rush 2.5” Propeller Set (2X CW, 2X CCW)
1x USB Battery Charger
1x Monitor to Transmitter Mounting Kit
1x HDZero Firmware Update Cable Kit
Pre-Orders shipping ASAP!
Experience superior performance with the Flywoo BNF Firefly DC16 Nano Baby V2.0 1S Deadcat Analog Micro Quad. Boasting a 30% power increase compared to its predecessor, it offers extended flight time while providing an incredibly stable flight experience. It comes with a new and improved canopy design for increased camera protection and a crash-resistant bottom plate for added durability. Enjoy the unmatched experience of this incredibly crafted drone from Flywoo.
Check out our other pre-built quads, as well as other great products from Flywoo!
Features
Redesigned canopy with enhanced aesthetics and reinforced camera protection.
The bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Equipped with ROBO 1002 19800Kv motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
Ultra-light GOKU Versatile F411 1S VTX AIO V2 with upgraded circuit board stability and a 250mw video transmitter, enabling an extended flight range.
A30 plug supports a continuous current of 15A, providing greater power and longer flight times compared to the PH2.0 connector.
Upgraded Flywoo 1S Nano camera V3 delivers clearer and better image quality.
New battery compartment design allows for easy replacement of batteries of different models.
Dead Cat Style
The drone boasts a dead cat design that enhances stability, extends battery life and provides an unobstructed flying experience with hidden propellers.
New Design
Redesigned canopy with enhanced aesthetics and reinforced camera protection.Bottom plate is thicker and has extended motor protection corners, resulting in a more stable and durable quadcopter.
Efficient Power Combo
Equipped with ROBO 1002 19800KV motor and 1608 3-bladed 40mm propellers, delivering a 30% increase in power, reduced noise, and enhanced flight stability.
Ultra-light AIO with 250mw VTX
The drone's GOKU Versatile F411 VTX 1S AIO V2 includes a built-in 250mW video transmitter, enabling an extended flight range and ultimate lightweight design without sacrificing performance, with improved circuit board stability.
Flywoo Nano Camera V3.0
Boasts a 4:3 aspect ratio, switchable NTSC and PAL formats, a 1/3" CMOS sensor, and global WDR, among other impressive specifications that render it an ideal choice for flying compact builds.
More Power, More Flight Time
The A30 plug can sustain a continuous current of 15A, whereas the PH2.0 connector can only support 4.5A. Given the same capacity, the A30 plug can release more current, providing greater power and, as a result, longer flight times even when flying at full speed.
Specifications
Frame Kit: Firefly 1S DC16 Nano baby quad Frame kit
Motor: ROBO 1002 19800KV
Electronic: GOKU Versatile F411 VTX 1S 5A AIO V2.0 w/ 250mw vtx
Propeller: 1608-3 Blade 40mm 1.5mm Shaft
Camera: Flywoo 1S Nano Camera V3
Weight: 26g
GOKU Versatile F411 VTX 1S 5A AIO V2.0 w/ 250mw VTX
Flight Controller
MCU: STM32F411CEU6
GYRO: ICM42688
UARTS: 1/2
Soft serial port：1
I2C: SCL/SDA
BEC: 5V
Input Voltage: 1S (<4.35v)
Firmware: FLYWOOF411_5IN1_AIO
Mounting: 25x25mm, M2
Onboard 4in1 ESC
MCU: EFM8BB21
Power supply: 1S LiPo/LiPo HVCurrent: 5A
Firmware: BLHeli_S
Factory firmware: O_H_5_REV16_8.HEX
Default protocol: DSHOT 150/300/600
Onboard 5.8g VTX
Output power: 25mw~250mw switchable
Frequency: 40CH
Frequency: 5.8GHz 5 bands 40 channels(include Race band) IRC ready
ROBO 1002 19800KV
Configuration: 9N12P
Stator Diamter: 10mm
Stator Length: 2mm
Shaft Diameter: 1.5mm
Motor Dimension(Dia.xLen): Φ13.5x7.75mm
Weight(g): 2.5(5cm wire)
Idle current(5)@5V(A): 1.3
No.of Cells(Lipo): 1S
Max Continuous Power(W)3S: 44
Internal Resistance: 89mΩ
Max Current(3S): 11.8A
Max Efficiency Current: (2-4A)>84%
Flywoo 1S Nano Camera V3
Model: Flywoo 1S Nano Camera V3
Image Sensor: 1/3" CMOS Sensor
Horizontal Resolution: 1200 TVL
TV System: NTSC and PAL(switchable)
MENU: Support
IMAGE: 4:3
Synchronization: Internal
Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
S/N Ratio: >52dB (AGC OFF)
Video Output: CVBS
Lens: 1.8mm/F2.5
Min. illumination: 0.001Lux
Auto Gain Control: YES
BLC: YES
WDR: Global WDR
DNR: 3D DNR
Dimensions: 14x14mm
Wide Power Input: DC 3.7-18V
Work Temperature: -20°C~+60C
Work Humidity: 20%~80%
Weight: 2.1g
Includes
1x Flywoo BNF Firefly DC16 Nano Baby V2.0 1.6" 1S Deadcat Analog Micro Quad - ELRS 2.4 GHz
4x 1608 -3 40mm 1.5mm shaft
2x TPU battery mount
1x hardware screws set
4x Prop guards
Pre-Orders shipping ASAP
Introducing the FlyLens 85 brushless whoop developed by Flywoo with international safety regulations in mind. It's equipped with a 1003 motor, 2S battery, and 2-inch bi-blade propeller long-lasting performance. The carbon fiber frame has undergone a special carbon black treatment process. The reverse push propeller structure increases power, reduces noise, and allows for easy adjustment of the battery's center of gravity position.
Check out the rest of our pre-built quads, as well as the rest of our Flywoo selection!
Features
Lightweight and compact design
High-strength protective ring for enhanced durability and safety.
Unique CNC damping platform for smooth and high-quality video recording
Reverse push propeller for stable flight and extended endurance.
FLYLENS 85 drone resources
A three-point CNC damping platform for the camera
A high-strength PC injection-molded protective ring
A quick-detach structure
Small size, lightweight, less than 100g, lightweight 2-inch drone.
High-strength PC injection-molded protective ring enhances the strength and safety of the drone.
Equipped with wireless control neon light strip and can carry external devices.
Specifications
Frame: FlyLens 85 Standard Frame Kit
Electronics: GOKU F405 ERVT 1-2S 12A 5-In-1 400mW AIo w/Built-in ELRS 2.4GHz
Receiver: ExpressLRS 2.4GHz
Camera: Caddx H1 Micro Camera
Propeller: 2015 2-Blade Propeller
Motor: ROBO 1003 14800KV
Antenna: Flywoo 5.8GHz Light 3dBi Brass Antenna UFL
LED: Flywoo Flexible LED + 3.3V Bec 2.7mm
Includes
1x Flywoo BNF FlyLens 85 2S Analog 85mm Brushless Whoop - ELRS 2.4GHz
Pre-Orders shipping ASAP!
Experience the GEPRC BNF CineLog35 V2 HD 6S 3.5" Cinewhoop for ultimate performance and stunning visuals. Featuring a DJI O3 Air Unit and O3 Camera, this 6S cinewhoop allows for a reliable connection and detailed visuals in HD quality. Choose from different versions of RX choice to enjoy a secure GPS connection.
New design with reinforced carbon plate, hollowed-out frame, noise reduction tech & enhanced safety. GEP F722-45A AIO V2 flight controller & SPEEDX2 2105.5 motor w/ HQ DT90 prop. Through the propeller guard for memory & USB access to O3 Air Unit. XT60E1-M plug & carbon plate design for power cable. 7075 aluminum parts for battery tie-down. Pre-tuned 3.5" HD cinematic FPV quad w/ delicate flight feel & pre-installed M8U GPS.
Check out our other pre-built quads, as well as the rest of our GEPRC selection.
Features
New appearance design, strengthening carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, silent.
Adopts the GEP F722-45A AIO V2 high performance flight controller.
For O3 camera design independent under hanging shock absorption gimbal, to solve the camera IMU resonance issues, to achieve the optimal anti-shake effect.
SPEEDX2 2105.5 motor with HQ DT90 propeller, stable power output, and smooth flight feel.
Through the Propeller Guard to access the memory card and USB ports to O3 Air Unit for easy data reading
Power cable using XT60E1-M plug and carbon plate integrated design, convenient application.
Battery installation method using a tie with 7075 aluminum parts fixed, solid and stable.
Carefully tuned 3.5-inch HD cinematic FPV quad with flexible and delicate flight feeling.
Pre-Installed with a GEP-M10 GPS
Specifications
Model: Cinelog35 V2 HD O3
Frame: GEP-CL35 V2
Wheelbase: 142mm
Gimbal plate: 2.0mm
Top plate: 3.5mm
Bottom plate: 1.5mm
FC system: GEP-F722-45A AIO V2
MCU: STM32F722RET6
Gyro: ICM 42688-P
OSD: Betaflight OSD w/AT7456E chip
ESC: 8Bit 45A
VTX: O3 Air Unit
Camera: DJI O3
Antenna: 5.8G & 2.4G
Motor: SPEEDX2 2105.5-2650KV (6S)
Propeller: HQProp D-T90MM
GPS: GEP-M10
Weight: 285.8g
Receiver: PNP / ELRS 2.4GHz / CRSF
Recommended battery: LiPo 1050mah-1300mah
Flight time: 5′00″ - 8′ 30″
Includes
1x GEPRC BNF CineLog35 V2 HD 6S 3.5" Cinewhoop w/ DJI O3 Air Unit & Micro Cam - Choose Your Receiver (GPS)
1x L-shaped screwdriver (1.5mm)
1x Naked GoPro Mounting Base
1x L-shaped screwdriver (2mm)
1x L-shaped screwdriver (3mm)
2x HQProp D-T90MM（2 pairs）
2x M20x250mm battery strap
1x Antenna fixed tube (pair)
1x Antenna Mounting Base
1x GoPro Mounting Base
2x Battery Silicone Pads
1x Plastic Tweezers
1x Hardware Set
1x M5 wrench
1x Keychain
Pre-Orders shipping ASAP!
The GEPRC BNF Mark5 HD Quad w/ Caddx Air Unit Micro is developed specifically for freestyle with squashed X arm design. Unique shock absorbing structure design, less vibrations and resonance, to provide a stable operating environment for the electronic system. Aluminum alloy side plates not only look stunning, but also reduce weight and add more endurance.
Make sure to check the ELRS Version!
Gopro case available separately.
Check out all our pre-built quads, and all our GEPRC selection!
Specifications
Input Voltage: 6S
Wheelbase: 225mm
Top plate: 2.5mm
Bottom plate: 2.5mm
Arm: 5mm
Charge connector: XT60
Motor: 2107.5 1960Kv
Weight: 385.5g
SPAN F722-HD-BT FC
MCU: STM32F722
IMU: MPU6000(SPI)
OSD: BetaFlight OSD w/AT7456E chip
Blackbox: 16Mb Flash
BEC: 5V, 9V
LC Filter: Yes
G50A ESC
MCU: STM32F051K86
Max Continuous Current: 50A
Max Burst Current: 55A
BEC: No
Current Sensor: Yes
Caddx Air Unit
Operating Temperature: 32 to 104 F (0 to 40 C)Input Power: 7.4-17.6V
Transmitter Power: FCC/SRRC: <30dBm CE: <14dBm
I/O Interface: USB-C, MMCX, 3-in1 Port, MicroSD
Output Power: 25mW3200mW/500mW/700mW
Video Transmission: 28ms Low Latency
Dimensions:
Air Unit: 44x37.8x14.4mm
Camera:20.7x19x19mm
Flight Control System: BetaFlight
Max Transmission Range: 4km
Coaxial Cable Length: 100mm
FOV: 150(D); 122(H); 93(V)
Goggle Compatibility: DJI
Closed Loop 4-in-1: Yes
Frequency Channels: 8
Shutter: Rolling Shutter
Sensor: 1/3.2" CMOS
Effective Pixels: 4 M
Image: 720p/120fps
Video Format: MP4
Video: 1080p/60fps
Lens: 2.1mm, F/21
ISO: 100-256000
Includes
1x GepRC BNF Mk5 Quad
4x Freestyle 4S propellers (pair)
1x Battery strap M15x250mm
2x Battery strap M20x220mm
2x Battery Silicone Pads
1x Camera cage carbon top plate
1x 3D print mountings combination
2x Action camera mount holder
1x Set of screws
1x Set of screwdrivers
1x Antenna fixed tube
Pre-Orders shipping ASAP!
The HGLRC Drashark Analog 1S 1.6" Toothpick Micro Quad - ELRS 2.4GHz is perfect for both beginners and experienced drone pilots. This budget-friendly mini-drone is designed to deliver top-notch performance both inside and out. It features a Caddx camera, SPECTER 1002 motor, and Gemfan 1610 bi-blade propellers for a more energy-efficient and low-noise flight. The HGLRC Zeus5 ES25 board lies at the core of this drone, boasting an F411 flight controller, 10A Bluejay compatible ESCs, 16MB onboard blackbox memory, and an ELRS 2.4GHz receiver with ceramic antenna. A 200mW analog video transmitter comes alongside, along with a Caddx FPV camera embedded in a 3D printed top. Perfect for those looking for a compact yet powerful drone experience!
Check out our other pre-built quads, and all our HGLRC products!
0
Specifications
Recommended Battery: 1S 500-600mAh
Motors: 1002 21000Kv
Propellers: Gemfan 1610 - 40mm Bi-Blade
Receiver: ELRS 2.4GHz
Weight: 30g
Size: 70x60mm
Gyro: BMI270
FC: HGLRC SPECTER 10A F411AIO
ESC: 10A Bluejay
Processor: F411
VTX output: 25/100/200mW
Includes
1x HGLRC BNF Drashark 1S 1.6" Analog Toothpick Micro Quad - ELRS 2.4GHz
All PRE-ORDERS shipping ASAP!!
This Nazgul DC5 ECO HD 6S is a 5-inch BNF (Bind-and-Fly) quadcopter that comes with the DJI Newest O3 Digital HD System and Nazgul 5" 3-Blade propellers. The Nazgul DC5 has been pre-tuned and set up with everything you need; all you need to do is bind and fly! Loaded with lots of power, it comes with the XING-E Pro 2207 6S motors, BLITZ F7 Flight Controller, and the BLITZ E55S 2-6S 55A 4-in-1 ESC, making this quad a must-have!
Be sure to check out our Bind-n-Fly collection as well as all of our iFlight Products!
Changelog:
July 19, 2024: Battery Plug mount updated to a fixed form. The Drone upgraded to V1.1.
Sept. 10, 2024: Product upgrade: the side panels will be installed by default.
Sept. 18, 2024: Top Plate updated, same as the top plate of Nazgul5 V3 and Nazgul XL5.
Note: As of May 8, 2024, the Albatross antenna is available in two versions, and they will be shipped randomly.
Features
XING-E 2207 Motors and NAZGUL F5 Props
Compatibility with 5.1" Style Propellers
No Props or Frame in View
LED Illuminated Logo
DJI O3 HD System
5mm Arm Design
Easy-Swap Arms
Specifications
Max Hover Time: Approx. 7.5 mins (With 6S 1400mAh no load)
Operating Temperature Range: -10°C to 40°C (14°F to 104°F)
Takeoff Weight: Approx. 675g (With 6S 1400mAh battery)
GNSS: GPS+SBAS+Galileo+QZSS+Glonass (Optional)
Product Name: Nazgul DC5 ECO O3 6S HD
Motor: XING-E Pro 2207 1800KV motors
Dimensions (L×W×H): 193×144×34 mm
Max Speed: 190 km/h (Manual Mode)
Max Wind Speed Resistance: Level 7
Video Transmission: DJI O3 Air Unit
Maximum Takeoff Altitude: 7000 m
ESC: BLITZ E55S 4-IN-1 ESC
Prop: Nazgul F5 propellers
Frame: 240mm wheelbase
Geometry: DC (DeadCat)
Antennas: Dual Antenna
FC: BLITZ F722 FC
Weight: 450g
VIDEO TRANSMISSION
Communication Frequency: 2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
Max Video Transmission Range: 10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Communication Bandwidth: Max 40 MHz
Max Video Transmission Bitrate: 50 Mbps
Product Name: DJI O3 Air Unit
Audio Transmission: N/A
FOV (single screen): 155°
Power Input: 7.4-26.4 V
End-to-End Latency:
With DJI FPV Goggles V2:
810p/120fps Video Transmission Quality: The latency is lower than 28 ms
810p/60fps Video Transmission Quality: The latency is lower than 40 ms
With DJI Goggles 2:
1080p/100fps Video Transmission Quality: The latency is as low as 30 ms
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms
Includes
1x iFlight BNF Nazgul DC5 ECO 6S 5" HD w/ DJI O3 Air Unit
2x Battery Pads
4x Propellers
2x Antennas
Pre-Orders shipping ASAP!
The Newbeedrone Hummingbird V2.1 is now here with an optimized layout to increase the reliability of high current through the traces!
Following the success of the NewBeeDrone Hummingbird F4 V1, the V2 brings highly requested changes to the table. Featuring brushless motors, our legendary cockroach frame, an upgraded MK3 camera, and a race-ready stable VTX. This is the Whoop you've been waiting for. Oh, and did we mention it uses BUILT-IN ELRS?
Check out all the other whoops and whoop products we sell and as well as our NewBeeDrone products!
Specifications
MCU: STM-F411 MCU for the main controller (Preloaded with BetaFlight)
IMU: BMI270
OSD: NBD OSD(Betaflight OSD Compatible)
UART Ports: 2 usable
USB: Micro USB
Input: 1S
Installing Hole: 25.5x25.5mm
Includes
1x NewBeeDrone BNF Hummingbird F4 V2 1S Brushless Whoop - ELRS
Pre-Orders shipping ASAP! New orders will be RANDOM COLOR per NewBeeDrone request.
Experience awesome performance and great value! - The best racer whoop for only $89.99. Special X-shaped board F4 processor, 25mW video transmission, SPI ELRS receiver, plug-and-play: no soldering! Quick repairs for when parts break. Shaving down on weight while maintaining its size. Compared to V2, we saved 1.3g. Reaching 23.31g with Nitro Nectar 300mAh battery, up to 4mins of fast flying. Featuring a Nitro Nectar Gold connector for better performance. 0802 25000kv motors and 3-blade Azi propellors for power and stability.
Check out our other pre-built quads, as well as the rest of our NewBeeDrone selection.
Unbelievable performance with unbelievable value. Best racer whoop just got
better again. At $89.99, there is no brushless whoop with this quality in the market.
Compared to Hummingbird V2, now with built-in VTX. Special X-shaped board with F4 processor, built-in 25mW video transmission, SPI ELRS receiver, and LEDs. Plug-and-play everything. Completely no soldering. Easy fast fixes when parts break.
We found the best ratio between the size of the drone and its weight distribution. Extra weight-saving from a true all-in-one board. X-shaped board to save unnecessary weight at corners. Compared to V2, we saved 1.3 grams. Total weight up to 23.31 grams. Up to 4 minutes with Nitro Nectar 300mAh batteries racing at insanely fast speed.
We believe in good chaos in this world. Add a little surprise and color in your life. If you REALLY don't like the color, you can always get a replacement and choose a new color when you break the frame with our unlimited frame warranty.
Designed to be 100% compatible with Nitro Nectar Gold for best performance. Super smooth and longer-lasting flights.
Firmware:
NewBeeDrone Github page
Specifications
Drone Size: 65mm
Flight Controller: Hummingbird V3 ELRS AIO Flight Controller
Frame: Cockroach65 Brushless Frame Random Color
Motors: Hummingbird 0802 Motor 25000KV
Propeller: Azi Tri-Blade 31mm Propeller Random Color
Camera: BeeEye Camera
Canopy: Goober Canopy v1 Random Color
Hummingbird V3 ELRS AIO Flight Controller
MCU: STM32F411
GYRO： BMI270
VTX: 25mw with BeeTX 5.8Ghz Antenna
ESC: 12A BLHeliS pre-flashed with Bluejay 0.19.2 Target: O-H-10 48kHz
ESC Connector: JST-1.0 3Pin
OSD: NBD7456 Graphical OSD compatible with Betaflight OSD
Receiver: 2.4G Antenna with MHF3 connector
Flight Controller Weight: 4.57g(Include antennas and battery connector) RS 3.23
Flight Controller Size: Outer dimensions: 29x29x7.6mm
Flight Controller Holes: 25.5x25.5mm
Battery input: 1S Only
Uart1: free
Uart2: free
Power Plug: Nectar Connector Gold Plated PH2.0 Solid Pin
Includes
1x NewBeeDrone BNF Hummingbird V3 1S Brushless Analog Whoop - ELRS 2.4GHz - Choose Your Color
Pre-Orders shipping ASAP!
The next Crush line is here from RadioMaster! The Pocket Crush is now available in seven stunning colors—' Iron Grey,' 'Frost White,' 'Mint Mist,' 'Hot Pink,' 'Cherry Red,' 'Iceberg Blue,' and 'Lemon Twist Yellow'— each designed to inspire and excite. Your favorite "fun-sized" radio can now match the whole drone fleet!
Check out all our RC Transmitters and our entire RadioMaster selection!
Features
Enhanced Connectivity
Vibrant Color Options
Durable Construction
Hall Effect Gimbals
Intuitive Interface
Stylish Aesthetics
Compact Design
Ergonomic Grip
Specifications
Module Bay: Nano size (Compatible with RadioMaster Nano-size modules, TBS Nano Crossfire/Nano Tracer)
Physical Dimensions: 156.6 x 65.1 x 125.3 mm (Folded size) / 156.6 x 73.1 x 154.8 mm (Unfolded size)
Upgradable Firmware: Via USB or the included SD card
Control Channels: Maximum 16 (Receiver dependent)
Operating Frequency: 2.400 GHz – 2.480 GHz
Battery: 2 pcs 18650 batteries (Not included)
Supported Protocols: Module dependent
Charging: Built-in USB-C QC3 charging
Display: 128 x 64 Monochrome LCD
Control Distance: >2 km @ 20 dBm
Internal RF Options: ELRS 2.4 GHz
Operating System: EdgeTx
Weight: 288 grams
Gimbal: Hall-effect
RF Power
Operational Voltage: 6.6 – 8.4 V DC
ELRS EU-LBT: 20 dBm max
ELRS FCC: 24 dBm max
CC2500: 20 dBm max
Includes
1x RadioMaster Pocket Crush RC Transmitter - ELRS 2.4GHz - Choose Your Color
4x Low Tension Springs
1x Custom Carry Pouch
1x Screen Protector
1x Manual
1x Sticker
(SOLD-OUT) LNL2431070, Lionel 2431070 - O Virginian Vision Triplex #701
Erie’s Triplex locomotives – machines so big they inspire, intrigue, and move the mind as much as they could move freight. Built in an era when the compound Mallet design was just coming onto the scene, the Triplex took the concept a step further in attempt to use not only the locomotive’s weight but also that of the tender for traction.
Announced Date: July 2023
Released Date: Est. 2nd Quarter 2024
Item # 2431070
Preorder Yes
Scale O
Road number May Vary No
Trains Steam Locomotives
Engine Style 2-8-8-8-2 - Triplex
Engine Electronics Legacy
Road Name Virginian
This product was added to our catalog on November 26, 2023
(SOLD-OUT) LNL2431620, Lionel 2431620 - Legacy F19 Pacific Steam Engine "Christmas" #1224
Product Information:
Announced Date: July 2023Released Date: Est. 2nd Quarter 2024
Road Number: 1224
Gauge: O Gauge
Power: Electric
Engine Type: Steam
Min Curve: O54
Dimensions: Length: 26"
Most Recent Catalog: 2023 Volume II Catalog
Features:
LEGACY® Control System equipped – able to run in LEGACY® Control mode, in TrainMaster Command Control mode, or in Conventional mode with a standard transformer
Bluetooth® Control - Operate with Universal Remote or LionChief® App
Lionel Voice Control (LVC) - run your locomotive by speaking commands into your phone via LionChief® App
Odyssey® II Speed Control
IR Transmitter that works with LCS SensorTrack™
Powerful maintenance-free motor with momentum flywheel
Wireless Tether™ connection between locomotive and tender
ElectroCoupler™ on rear of tender
Whistle steam
Directional lighting including operating headlight and back-up light on rear of tender
Bicolor illuminated classification lights on the front of locomotive where applicable. Using a Legacy controller, change the color of the classification lights between white or green
Traction tires
Interior illumination in cab
Die-cast metal locomotive body, pilot, and trucks
Die-cast metal tender body and trucks
High level of separately applied metal details
Separately applied builder's plate
Synchronized fan-driven smoke unit
Adjustable smoke output
Authentically detailed cab interior
Cab "glass" windows
Engineer and fireman figures
LEGACY® RailSounds® sound system featuring:
CrewTalk™ dialog with different scenarios depending on whether the locomotive is in motion or stopped
TrainSounds that mimic operating dialog when the locomotive is in motion or stopped
Six official railroad speeds with CrewTalk dialog
DynaChuff™ synchronized with 32 levels of intensity as the locomotive gains speed
LEGACY® "Real-Time Quilling Whistle" control with instant response for realistic signature "quilling" and correctly timed warning signals - 5 different whistles to choose from for a more customized experience.
Single hit or continuous mechanical bell sounds - 5 levels of bell pitching for customized sounds
Sequence Control: plays the sound effects of an entire trip, including warning sounds and announcements, based on the movement and speed of the locomotive
Current speed and fuel dialog, coal or oil loading sound effects
Overview:
The C&O's F-19 class of Pacifics proved that beauty could take many forms. While USRA Pacifics are highly regarded for their simplicity, the F-19 was anything but! With a front end cluttered with air pumps and a feedwater heater, the C&O shop forces had to improvise when it came to adorning the class for special premier assignments. But they did! Wearing eagles or silhouettes on the water heaters, polished compressor and cylinder head covers with stars and kept in high polish, the F-19s made a spectacular appearance worthy of Chessie's finest trains. The class left a lasting impression despite being only 5 locomotives large and lasting in service from only 1926-1946 when they were rebuilt as 4-6-4s. The F-19s helped to inaugurate the Sportsman in 1930 and the new premier George Washington in 1932. Ironically, their most adorned and memorable years coincided with the Great Depression - a testimony to the strength of pride kept in the C&O shops and commitment to first-class passenger service by management even in the worst of times. Available from Lionel for the first time since 2007 and now updated with LEGACY, Bluetooth and Whistle steam amongst all our other now-standard features, this locomotive is making a long-overdue return to the spotlight. We've created multiple variations to capture the majority of changes the locomotives saw in their 20-year careers - more variations than there were locomotives in the class! We've also included a few fantasy locomotives as well. From the high gloss applied to these locomotives, the shine off the boiler in many early photos seems to suggest they were painted gray. They weren't as far as we know but it looked like a pretty neat variation so we're offering it here! C&O and PM had swapped other classes of Pacifics and they also acquired some from the RF&P so those seemed like reasonable "what ifs" as well. The F-19 steps up to fill the high demand we've had for matching steam power for the Sleigh Bell Limited, and of course with a menacing face like this we had to do a Halloween version! Add some Presidential power to your roster this year with these beautifully unique Pacifics!
This product was added to our catalog on November 26, 2023
We have expanded our line of building supplies with the addition of a variety of 0.8mm heat shrinks. Good for protecting those smaller wiring connections.
Check out all our tools and building supplies!
Specifications
Outer Diameter: 0.8mm
Temperature Rating: 125 C
Voltage Rating: 600V
Includes
1x 0.8mm Heat Shrink Tubing by the foot
001 02 006, N Scale Universal BMC Medium Shank Assembled (1016-1)
2 pair assembled 1016 couplers. This coupler is designed for a mounting height of .279”, or .293” with shim provided, for a mounting height above rail top. For other mounting heights above .279”, use appropriate shims between mounting platform and top of coupler.
This product was added to our catalog on June 5, 2021
N Scale Barber Roller Bearing Trucks w/ med. ext. couplers 10 pr. (1037-10)Barber Roller Bearing trucks with assembled medium ext. Magne-Matic® coupler 10 pr.
01004432-3, Futaba 10PX USLE 10-Channel 2.4GHz T-FHSS Radio System w/Case (Limited Edition)
The Futaba 10PX USLE, featuring a limited edition serial number, 3D carbon handle, and a magnesium steering housing, stands as the ultimate remote control transmitter for precision and performance. At its core, you'll find an impressive full-color TFT Liquid Crystal Touch screen LCD, generously sized at 4.3 inches, making it ideal for both indoor and outdoor use. Thanks to its transflective technology, it guarantees crystal-clear visibility in any lighting condition.
In addition to its remarkable display, the Futaba 10PX offers exceptional functionality with its 10 channels, driven by the lightning-fast F-4G system, delivering unbeatable telemetry responsiveness. If you require even greater versatility, the S.BUS2 system enables the simultaneous operation of up to 10 channels. Moreover, you have the option to personalize your experience using the T-FHSS MINIZ system, providing you with the flexibility to fine-tune your setup through the Kyosho Mini-Z Evo dedicated receiver.
Besides these state-of-the-art attributes, the 10PX boasts a plethora of features, including brake and steering mixing for larger vehicles, 4WS mixing for crawlers, and gyro sensitivity adjustments. Its compatibility with LiPo batteries, ability to receive firmware updates via a microSD card, and customizable button configuration make it an empowering choice for taking command like never before. Elevate your RC experience with the 10PX – it's the ultimate tool for dedicated enthusiasts.
Features:
Full color TFT Liquid Crystal Touch
USLE Trim Level with magnesium steering bracket and Limited Edition serial number
Includes high-quality carrying case
F-4G system & telemetry
Up to 10 channels can be operated by using the S.BUS2 system
By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42 (Sold Separately)
Software can be updated via microSD card (Sold Separately)
40 model memory with allowance for 15 character names
Brake mixing for large cars
Steering mixing is independent allowing for precise left and right steering servo settings
4WS mixing for crawlers
Dual ESCs mixing allows for two ESCs to be controlled independently
The sensitivity of Futaba car gyros can be adjusted from the T10PX
Futaba S.BUS servo allows setting of the parameters of select Futaba S.BUS servo
CPS LED light mixing
Tank mixing
Compatible with 6.6V LiFe and 7.4V LiPo Batteries
Specifications:
Frequency: 2.4GHz @ 100mW
Protocols: T-FHSS-SR/T-FHSS/S-FHSS
Voltages: 6.6V LiFe/7.4V LiPo
Current Drain: 350mA or Less
Antenna Type: 1/2 Dipole
Display: 4.3in TFT Liquid Crystal Touch
Includes:
(1) 10PX USLE Transmitter with limited edition number plate
(1) Limited edition carrying case with badge
(1) 3D Carbon fiber handle
Magnesium steering housing
(3) Limited edition gray grips
(1) Dry Battery Holder
32° and 5° Wheel offset adapters
(1) Large and small diameter steering wheel
Multi tension spring kit
(2) Trigger guards
(1) Rubber Grip
(1) Hex wrench
(1) Short manual
This product was added to our catalog on November 25, 2023
01102213-1, Futaba, SBS-01T Temperature Sensor
This is an optional Futaba SBS-01T Temperature Sensor. This sensor simply plugs into the S.Bus2 slot on telemetry-enabled receivers, which transmit data directly to FASSTest systems.
Monitor temperatures on engines, motors, mufflers and batteries - nearly anything that radiates heat!
Specifications:Range: -4 to 392° F (-20 to 200°C)Weight: 0.16 oz (4.6g)Size: 535mm
This product was added to our catalog on March 15, 2023
01102289-1, Futaba, SBS-01V External Battery Voltage Sensor
This is the Futaba SBS-01RO Optical RPM Sensor. Getting the performance information you want has never been easier, lighter or more convenient! This sensor plugs into the S.Bus2 slot on telemetry-enabled receivers, and transmits the data directly to FASSTest systems.
Specifications:
Displays: revolutions per minute
Range: 360-300,000
Weight: 0.17 oz (4.9 g)
This product was added to our catalog on February 25, 2023
020149-2, R1 25.5T V21-S Motor W/Hand Picked Stator ROAR
NOTE: This motor uses v16 can screws, our option v21 set will not work with these motors.
APPLICATION
OFFROAD BUGGY, TRUCK, 4WD & SHORT COURSE TRUCK
TC BLINKY (OUTDOOR & INDOOR)
1/12 1S BLINKY
OVAL 1S BLINKY
OVAL 1S OPEN (BOOSTED)
TECHNOLOGY
PROPRIETARY R1 STATOR LAMINATE MATERIAL
R1 V21 STATORS ARE DESIGNED USING COMPUTER SIMULATION TECHNOLOGY
EPOXY BONDED END WIND
ULTRA LOW RESISTANCE COLLECTOR RING
IMPROVED RESISTANCE COMPARED TO V16
IMPROVED PUNCH & TOP END
INCLUDES ALUMINUM TIMING RING
This product was added to our catalog on August 4, 2023
R1 Wurks 21.5 V21HD Motor
This new motor was developed in house in collaboration with our team drivers. We have transformed our race winning V21-S motor into a heavy duty version. This motor has improved can and stator durability that makes it stronger than the current V21-S offering. This motor is a 2-piece design. The front end of the motor is thicker being a single piece and with removable endbell.
This product was added to our catalog on August 4, 2023
02075, Steering Bellcrank Assembly (1pc)
PRODUCT FEATURES
Steering Bellcrank Assembly (1pc)
Plastic Bellcrank Assembly with post and bushings
Fits all EPX/EPX Pro and STK Models
1/10 Scale On Road Car Body
Length - 17" or 430mm
Width - 8" or 200mm
Height - 4.5" or 115mm
Wheelbase - 10" or 255mm
Color - Clear
Window Stickers Included - No
Other Stickers Included - Yes
Precut - Yes
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.
These 1 meter (39.37") pultruded Carbon Fiber rods are great for reinforcing models. Use them in the wings, fuselage, or other parts of the model.
Be sure to choose the dimensions right for you.
We carry Rods, Strips, Tubes and Square Tubes!
Includes
1x 1 Meter Carbon Fiber Rod - Choose Your Size
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.
These 1 meter (39.37") pultruded Carbon Fiber Square/Square Tubes are great for reinforcing models. Use them in the wings, fuselage, or other parts of the model.
Be sure to choose the dimensions right for you.(Outer Dimensions x Thickness x Length)
We carry Rods, Strips, Tubes and Square Tubes!
Includes
1x 1 Meter Carbon Fiber Square Tubes - Choose Your Size
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.
These 1 meter (39.37") pultruded Carbon Fiber strips are great for reinforcing models. Use them in the wings, fuselage, or other parts of the model.
Be sure to choose the dimensions right for you.We carry Rods, Strips, Tubes and Square Tubes!
Includes
1x 1 Meter Carbon Fiber Strip - Choose Your Size
Due to this item’s size or weight, it is not available for free shipping and may be shipped via UPS Ground.
These 1 meter (39.37") pultruded Carbon Fiber Tubes are great for reinforcing models. Use them in the wings, fuselage, or other parts of the model.
Be sure to choose the dimensions right for you.(Outer Diameter x Thickness x Length)
We carry Rods, Strips, Tubes and Square Tubes!
Includes
1x 1 Meter Carbon Fiber Tube - Choose Your Size
