RPM
RPM RPM80702, RPM Traxxas Slash 4x4 Front or Rear A-arms (Black)
RPM80702, RPM Traxxas Slash 4x4 Front or Rear A-arms (Black) RPM A-arms for the Traxxas Slash 4x4 are everything you’ve come to expect from RPM and more! Features: They eliminated the slop in the suspension system, tightening the tolerances around the hinge pins, reduced the fore and aft movement of the A-arms at both the inner hinge pin and at the axle carriers by better than 90% and improved the durability dramatically (they’re made by RPM, enough said). As a bonus, they cut 6.5 grams of weight off of each A-arm! That’s a total loss of just under one ounce of weight simply by replacing your stock A-arms with the RPM versions! We can’t forget about how much better aesthetically the RPM versions look either. RPM A-arms carry over the RPM traditional look with our 30 degree leading and trailing edges, and huge bosses for the shock and sway bar mounts. Additionally, you now have the option of a bit of color with either blue or black to choose from. RPM A-arms are molded in RPM trademark blend of incredibly durable nylons and are backed by an industry leading warranty. We proudly stand behind our products! Designed, manufactured and produced right here in southern California in the USA! This product was added to our catalog on March 2, 2021
$11.95
RPM RPM80592, RPM Traxxas Slash Rear A-Arms (Black) (2)
RPM80592, RPM Traxxas Slash Rear A-Arms (Black) (2) This product was added to our catalog on May 16, 2021
$11.95
RPM RPM80182, RPM Traxxas Rustler/Stampede Rear A-Arms (Black) (2)
RPM80182, RPM Traxxas Rustler/Stampede Rear A-Arms (Black) (2) A set of optional RPM Rear A-Arms, and are intended for use with the Traxxas Electric Rustler and Stampede trucks. This product was added to our catalog on December 16, 2021
$10.95
RPM RPM81465, RPM E-Revo 2.0 Front Right Suspension Arm Set (Blue)
RPM81465, RPM E-Revo 2.0 Front Right Suspension Arm Set (Blue) This is the RPM E-Revo 2.0 Front Right Suspension Arm Set, including the front right upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole. This product was added to our catalog on March 16, 2021
$15.95
RPM RPM81515, RPM E-Revo 2.0 Front Left Suspension Arm Set (Blue)
RPM81515, RPM E-Revo 2.0 Front Left Suspension Arm Set (Blue) This is the RPM E-Revo 2.0 Front Left Suspension Arm Set, including the front left upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks. RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole. This product was added to our catalog on April 6, 2021
$15.95
RPM RPM80662, RPM Traxxas X-Maxx Oversized Front Axle Carriers w/Bearings (2)
RPM80662, RPM Traxxas X-Maxx Oversized Front Axle Carriers w/Bearings (2) RPM Traxxas X-Maxx Oversized Front Axle Carriers feature increased durability and larger inner bearings. Stock bearings are a mere 20x27x4mm while the oversized bearings RPM uses are gigantic a 20x32x7mm. This delivers a load rating that is nearly 300% higher than the stock bearings while the static load rating is over 300% higher. That’s triple the strength of the stock inner bearings. Features: Replaces stock Traxxas TRA7737 Includes gigantic 20x32x7mm inner bearings Massive steering support ribs for the strongest possible carriers Outer bearings not included (Stock bearings are used) Sold in pairs (1 Left/1 Right) This product was added to our catalog on May 18, 2021
$26.95
RPM RPM81732, RPM Traxxas X-Maxx Oversized Rear Axle Carriers
RPM81732, RPM Traxxas X-Maxx Oversized Rear Axle Carriers RPM Oversized Rear Axle Carriers for the Traxxas X-Maxx were designed to solve two key issues reported by owners of this beast of a truck. The first being durability - these carriers are designed to handle some serious abuse. RPM Oversized Axle Carriers feature massive support ribs for the strongest possible carriers available. The other major improvement is larger inner axle bearings. The stock inner bearings are a mere 20x27x4mm. The oversized bearings are gigantic 20x32x7mm bearings! That’s 5mm larger on the diameter and 3mm on the width! That equates to a dynamic load rating that is nearly 300% higher than the stock bearing while the static load rating is over 300% higher! The differences are so dramatic you’ll wonder why these didn’t come stock. RPM Oversized Rear Axle Carriers are molded in black and backed by the RPM limited lifetime warranty against breakage. You can’t go wrong with RPM parts on your X-Maxx.NOTE: RPM Oversized Rear Axle Carriers replace the stock Traxxas TRA7752 part. Each package is sold as a pair (one left and one right) and includes two inner oversized bearings (one for each side). Outer bearings are stock Traxxas bearings (TRA5106 or TRA5106A) and are not included in this kit. This product was added to our catalog on December 16, 2021
$24.95
RPM RPM70862, RPM LaTrax Front/Rear Suspension Arm (2)
RPM70862, RPM LaTrax Front/Rear Suspension Arm (2) This is an optional set of two RPM LaTrax Front or Rear Suspension Arms, intended for use with the Traxxas LaTrax Prerunner, Teton or SST kits. These lightweight optional parts are a strong, rigid upgrade for your 1/18th scale Latrax. Features:Sold in pairsLightweight, rigid option over stock partsMade in the USA This product was added to our catalog on December 16, 2021
$9.95
RPM RPM81670, RPM Traxxas X-Maxx 20x32x7mm Oversized Inner Bearing (2) (RPM81732)
RPM81670, RPM Traxxas X-Maxx 20x32x7mm Oversized Inner Bearing (2) (RPM81732) RPM Traxxas X-Maxx Oversized Inner Bearings are replacement bearings for X-Maxx trucks equipped with optional RPM Traxxas X-Maxx Oversized Axle Carriers (RPM81732). NOTE: These bearings are 20x32x7mm in size and are not compatible with stock Traxxas axle carriers (TRA7752). This product was added to our catalog on December 16, 2021
$11.95
RPM RPM70982, RPM Traxxas Sledge Front Bumper & Skid Plate (Black)
RPM70982, RPM Traxxas Sledge Front Bumper & Skid Plate (Black) RPM Traxxas Sledge Front Bumper and Skid Plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge is a unique design that works with the Traxxas body mounting mechanism. Traxxas designed the body mounting system to move forward instead of rearward. Because it moves forward by well over 1" (25mm), it severely limits bumper design. However, RPM engineers found a way to incorporate a fully functioning bumper with the Traxxas body mounting system. RPM eliminated the stock bumper and replaced it with a hinge pin retainer, since realistically, that's all the stock bumper really is. Next, they eliminated the stock skid plate in favor of a wider, longer and more protective skid. Lastly, they bolted a unique bumper to the front of the skid plate. The RPM Front Bumper and Skid Plate for the Traxxas Sledge sits below the body, which allows the body mounting system full range of motion, yet the Sledge finally has some tough, RPM front end protection. NOTES: The RPM Front Bumper and Skid Plate is designed specifically for the Traxxas Sledge and replaces the bumper and skid plate from stock Traxxas (TRA9535). This product was added to our catalog on January 27, 2023
$18.95
RPM RPM70510, RPM Traxxas X-Maxx Threaded Hinge Pin Set
RPM70510, RPM Traxxas X-Maxx Threaded Hinge Pin Set This is an optional RPM Threaded Hinge Pin Set for the Traxxas X-Maxx. RPM Threaded Hinge Pins work with stock Traxxas A-arms as well as RPM A-arms, are manufactured from stainless steel and are tough as nails! If you’ve lost or damaged your stock hinge pins, or perhaps you’re tired of losing those tiny hinge pin retaining screws, give RPM threaded hinge pins a shot and never look back! Tech Notes: RPM Threaded Hinge Pins are 4mm x 56mm and work in the outer A-arm hinge pin location. Each kit comes with 4 – threaded hinge pins and 4 – M3 locknuts. Our hinge pins can be used as a replacement for CEN GS025 hinge pins as well but RPM versions use a 3mm locknut instead of a 4mm version. When used with the X-Maxx (using stock or RPM A-arms), some minor modification of the A-arms is required for the hinge pins to fit (see instructions for more information). This product was added to our catalog on December 16, 2021
$9.95
RPM RPM81462, RPM E-Revo 2.0 Front Right Suspension Arm Set (Black)
RPM81462, RPM E-Revo 2.0 Front Right Suspension Arm Set (Black) This is the RPM E-Revo 2.0 Front Right Suspension Arm Set, including the front right upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks! RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole. This product was added to our catalog on December 16, 2021
$15.95
RPM RPM81512, RPM E-Revo 2.0 Front Left Suspension Arm Set (Black)
RPM81512, RPM E-Revo 2.0 Front Left Suspension Arm Set (Black) This is the RPM E-Revo 2.0 Front Left Suspension Arm Set, including the front left upper and lower arms. While Traxxas may have beefed up the Revo 2.0 suspension arms, they’re still not nearly as tough as RPM versions, nor are they as light. RPM A-arms weigh in 5 grams less than stock, per side, for a total weight loss of 10 grams! RPM geometry also has its advantages. Our angled leading and trailing edges not only cut through the air cleaner and more efficiently, those same edges allow the A-arms to slip up and over tall objects with less chance of a direct impact stopping you in your tracks. RPM front A-arms for the Traxxas Revo 2.0 are molded from indestructible blend of engineering grade nylons and sold as one upper and one lower A-arm. All RPM A-arms are manufactured in the USA and carry with them a limited lifetime warranty against breakage. Tech Notes: RPM81462 & RPM81465 replace stock Traxxas TRA8631. RPM Revo 2.0 A-arms will not work with long travel (LT) style rockers. Upper A-arms will not work in the lower roll-center hinge pin hole. This product was added to our catalog on February 6, 2021
$15.95
RPM RPM80962, RPM Traxxas Rustler 4x4 Wheelie Bar Mount
RPM80962, RPM Traxxas Rustler 4x4 Wheelie Bar Mount This product was added to our catalog on May 16, 2021
$9.95
RPM RPM80902, RPM Bumper Mount (Black) (Rustler, Stampede, Bandit, Slash)
RPM80902, Rear Bumper/Wheely Bar Mnt, Black: ST, BA, RU, SLH This product was added to our catalog on May 16, 2021
$9.95
RPM RPM80492, RPM Front A-Arms (Black) (Nitro Rustler & Bandit) (2)
RPM80492, RPM Front A-Arms (Black) (Nitro Rustler & Bandit) (2) Product Details Overview RPM sets the standard in the R/C industry for durability and all out rugged performance. Our Traxxas Nitro Rustler, Nitro Stampede, & Nitro Sport A-arms are built to stand up against the toughest abuse from the backyard basher all the way to the top-level racers. Our A-arms incorporate all stock geometry; yet have been redesigned for strength, looks, performance, and durability. We build these A-arms from our well-known trademark blend of nylons for bulletproof performance and unsurpassed durability. They carry our reputable warranty against breakage as well. These A-arm sets are sold in pairs and come in either black or our extremely popular blue, which is molded into the A-arm for scratch resistant color that lasts and lasts. Product Specifications Material Plastic Color Black This product was added to our catalog on December 16, 2021
$10.95
RPM RPM80695, RPM Front Upper & Lower A-Arms (1/16 E-Revo) (Blue)
RPM80695, RPM Front Upper & Lower A-Arms (1/16 E-Revo) (Blue) This is a set of RPM Front Upper & Lower A-Arms, and are intended for use with the Traxxas 1/16 E-Revo. Upon the release of the 1/16th Scale Traxxas Mini E-Revo, RPM immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With RPM's guaranteed unbreakable material and a proven A-arm design based off of their larger, 1/10th scale Revo A-arms durability for these little powerhouse trucks has finally arrived! Another problem that has been eliminated was slop in the suspension system. In some cases, as much as 1/32” of slop is found in the stock A-arms! That problem has been solved with these new RPM versions. RPM A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result is smoother, more consistent steering and suspension movement with a significantly reduced tendency for the truck to randomly wander while driving. These arms also feature angled leading and trailing edges. RPM incorporates a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them. RPM front A-arms for the Traxxas Mini E-Revo are sold in sets of four – both upper and both lower a-arms, and are backed by RPM's industry-leading breakage warranty. If it breaks (under normal operating conditions), send it to RPM and they will replace it! This product was added to our catalog on December 16, 2021
$14.95
RPM RPM73755, RPM Traxxas 2WD Front Bulkhead (Blue)
RPM73755, RPM Traxxas 2WD Front Bulkhead (Blue) Fits: Traxxas Bandit Traxxas Nitro Rustler Traxxas Nitro Slash Traxxas Nitro Sport Traxxas Nitro Stampede Traxxas Rustler 2wd Traxxas Slash 2wd Traxxas Stampede 2wd This product was added to our catalog on May 16, 2021
$11.95
RPM RPM70392, RPM Front Shock Tower, Black: SLH 4x4, ST 4x4
RPM70392, Front Shock Tower, Black: SLH 4x4, ST 4x4 Traxxas Rally Traxxas Slash 4x4 Traxxas Stampede 4x4 This product was added to our catalog on December 16, 2021
$10.95
RPM RPM73762, RPM Traxxas Castle Mamba X ESC Cage (Black)
RPM73762, RPM Traxxas Castle Mamba X ESC Cage (Black)This product was added to our catalog on December 16, 2021
$9.95
RPM RPM LaTrax Teton/Rally Front/Rear Chassis & Differential Covers
RPM70795, RPM LaTrax Teton/Rally Front/Rear Chassis & Differential Covers This is the RPM LaTrax Teton/Rally Front/Rear Chassis and Differential Covers. These tough covers offer the incredible strength that RPM parts are known for. By rerouting the upper chassis plates around the outside of the pivot ball mounts this has allowed RPM to link the pivot ball mount directly into the differential bulge. This creates a much stronger setup along with being combined with RPM's engineering grade materials gives you an excellent boost in strength. Package includes one front chassis cover, one rear chassis cover, one front differential cover and one rear differential cover. This product was added to our catalog on October 26, 2023
$14.49
RPM BZN540046, Wheel Lock Bolts, Slyder
Wheel Lock Bolts, Slyder
$3.49
RPM RPM81242, RPM Rear Skid Plate (Black) (Slash)
RPM81242, RPM Rear Skid Plate (Black) (Slash)This product was added to our catalog on December 16, 2021
$11.95
RPM RPM81252, RPM Front Skid Plate (Black) (Slash)
RPM81252, RPM Front Skid Plate (Black) (Slash)This product was added to our catalog on December 16, 2021
$11.95
RPM RPM80165, RPM T-Maxx & E-Maxx Shock Tower & Body Mounts-Blue
RPM80165, RPM T-Maxx & E-Maxx Shock Tower & Body Mounts-Blue This product was added to our catalog on December 16, 2021
$16.95
RPM RPM80953, RPM Traxxas Slash Front Bumper & Skid Plate (Chrome)
RPM80953, RPM Traxxas Slash Front Bumper & Skid Plate (Chrome)This product was added to our catalog on December 16, 2021
$14.95
RPM RPM81262, RPM Camber Links (Rustler, Stampede)
RPM81262, RPM Camber Links (Rustler, Stampede) This product was added to our catalog on December 16, 2021
$5.95
RPM RPM80715, RPM 30 Deg Caster Block Set (Blue) (2) (Rustler, Stampede, Slash)
RPM80715, RPM 30 Deg Caster Block Set (Blue) (2) (Rustler, Stampede, Slash)This product was added to our catalog on December 16, 2021
$9.95
RPM RPM70812, RPM Traxxas Rustler Rear Bumper (Black)
RPM70812, RPM Traxxas Rustler Rear Bumper (Black)This product was added to our catalog on December 16, 2021
$11.95
